This test casts 0x4 to a function pointer and calls it. Unfortunately, the
faulting address may not exactly be 0x4 on PPC64 ELFv1 systems. The LLVM PPC
backend used to always generate the loads "in order", so we'd fault at 0x4
anyway. However, at upcoming change to loosen that ordering, and we'll pick a
different order on some targets. As a result, as explained in the comment, we
need to allow for certain nearby addresses as well.
llvm-svn: 226202
The new parser is a lot stricter about syntax, reports unrecognized
flags, and will make it easier to implemented some of the planned features.
llvm-svn: 226169
Linux has 64k pages, so the old limit was only two pages. With ASLR the
initial sp might be right at the start of the second page, so the stack
will immediately grow down into the first page; and if you use all pages
of a limited stack then asan hits a kernel bug to do with how stack
guard pages are reported in /proc/self/maps:
http://lkml.iu.edu//hypermail/linux/kernel/1501.0/01025.html
We should still fix the underlying problems, but in the mean time this
patch makes the test work with 64k pages as well as it does with 4k
pages.
llvm-svn: 225261
This is a re-commit of r224838 + r224839, previously reverted in r224850.
Test failures were likely (still can not reproduce) caused by two lit tests
using the same name for an intermediate build target.
llvm-svn: 224853
This is mostly useful for testing, as the only other way of specifying
activation options (Android system property) is system-wide and affects
concurrently running tests.
llvm-svn: 224824
Summary:
This test failed because clang compiled the call to memset() into a
single sth instruction, instead of a call. Fix it by using write() instead
of memset().
Reviewers: kcc, samsonov, garious, eugenis
Reviewed By: eugenis
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6776
llvm-svn: 224812
The ASan test/asan/TestCases/log-path_test.cc testcase uses /INVALID as an invalid path and expects that the program will not be allowed to create or write to that file. This actually is a valid writable path on one of my setups. Let's make the path more invalid.
Reviewed at http://reviews.llvm.org/D6727
llvm-svn: 224694
The test got silently disabled because of a typo in the lit config.
Also, compiler flags have changed (asan-coverage -> fsanitize-coverage).
llvm-svn: 224569
Summary:
Always quote suppressions files given to *_OPTIONS.
This will make it not break when given full Windows paths (otherwise,
parsing would stop after the drive's letter + ':').
Also fix one or two cases where the suppression files' extensions were
not *.supp.
Reviewers: samsonov, kcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6680
llvm-svn: 224529
-fsized-delete is implemented via weak symbols, and doesn't work
properly when malloc/free replacements are provided in shared
ASan runtime.
llvm-svn: 224474
This commit changes the strategy for building shared ASan runtime
and the way we test it:
- COMPILER_RT_BUILD_SHARED_ASAN CMake option is removed. We now
always build shared ASan runtime (it is the default on Android,
Windows and Mac, and not the default on Linux and FreeBSD).
- Platforms, which use static runtime by default now have
"check-asan-dynamic" testsuite. This testsuite contains instrumented
unit tests, and ASan lit tests, and runs them with shared ASan
runtime. This testsuite is *not* a part of "check-asan" and
*not* a part of "check-all", as adding 1000 more test cases, which
duplicate existing ones is costly. However, you're welcome to
add this command to your buildbot.
llvm-svn: 224470
They don't test what they claim to because LD_PRELOAD applies to "not" instead
of the actual test binary. And all Android tests run with LD_PRELOAD anyway.
llvm-svn: 222835
Summary:
First, remove lit configuration that sets ASAN_OPTIONS to detect_leaks=1
because this is already the default when leak detection is supported.
This removes a bit of duplication between various lit.cfg files.
Second, add a new feature 'leak-detection' if we're targetting x86_64
(not i386) on Linux.
Third, change a couple of tests that need leak detection to require the
new 'leak-detection' feature.
Reviewers: kcc, earthdok, samsonov
Reviewed By: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6396
llvm-svn: 222738
Reviewed at http://reviews.llvm.org/D6238
ASan on Darwin during launch reads DYLD_INSERT_LIBRARIES env. variable and if it's not set or if the ASan dylib is not present in there, it relaunches the process. The check whether the dylib is present in the variable is now trying to find a full path in there. This fails in the scenarios where we want to copy the dylib to the executable's directory or somewhere else and set the DYLD_INSERT_LIBRARIES manually, see http://reviews.llvm.org/D6018.
Let's change the search in DYLD_INSERT_LIBRARIES to only look for the filename of the dylib and not the full path.
llvm-svn: 222297
Summary:
This test explicitly sets ASAN_OPTIONS=detect_leaks=1 which is only
supported on x86-64. The test is currently restricted to run only on
64-bit targets, but needs to be restricted further so it only runs on
x86-64.
Reviewers: kcc, eugenis, earthdok, samsonov
Reviewed By: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6189
llvm-svn: 222091
Summary:
As a follow-up to D6167, this patch fixes the test to account for
another difference between PowerPC and x86 systems.
On x86 if you branch to an invalid address, you get a SIGSEGV with PC
set to the invalid address (and si_addr in the siginfo struct also set
to the same address).
On PowerPC, you get a SIGSEGV with PC pointing at the branch
instruction, but si_addr set to the invalid address.
You can see this difference if you run the test case under gdb.
Reviewers: kcc, glider, samsonov
Reviewed By: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6226
llvm-svn: 221929
Summary: My PowerPC64 Linux box has 64k pages. The test assumes 4k pages. Fix it.
Reviewers: glider, eugenis, samsonov
Reviewed By: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6228
llvm-svn: 221875
Summary: This test case is blatantly x86-specific, so skip it on other targets.
Reviewers: kcc, eugenis, earthdok, samsonov
Reviewed By: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6216
llvm-svn: 221778
Summary:
Address sanitization of ptrace(2) is only implemented for x86, so skip
the test on other targets.
Reviewers: kcc, eugenis, earthdok, samsonov
Reviewed By: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6215
llvm-svn: 221777
Summary:
In the Power architecture, all branch instructions ignore the 2 least
significant bits of the target address. Consequently if you branch to an
invalid address, the address reported along with the SIGSEGV will have
been rounded down to a multiple of 4. Tweak this test accordingly.
This may fix the test for ARM too, in which case we could remove
the XFAIL, but I have no way of testing that.
Reviewers: kcc, willschm, glider, samsonov
Reviewed By: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6167
llvm-svn: 221542
for both PPC64 Big and Little endian modes, so also eliminates the need for
the BIG_ENDIAN/LITTLE_ENDIAN #ifdeffery.
By trial and error, it also looks like the kPPC64_ShadowOffset64 value is
valid using (1ULL << 41) for both BE and LE, so that #if/#elif/#endif block
has also been simplified.
Differential Revision: http://reviews.llvm.org/D6044
llvm-svn: 221457
The current ASan testcase Posix/allow_user_segv.cc expects SIGBUS to be triggered on 32-bit Darwin. This has apparently changed on 10.10 to trigger SIGSEGV instead, just as on 64-bit. Let's just install handlers for both SIGSEGV and SIGBUS instead of #ifdef'ing.
Reviewed at http://reviews.llvm.org/D6121
llvm-svn: 221381
Change the LC_ID_DYLIB of ASan's dynamic libraries on OS X to be set to "@rpath/libclang_rt.asan_osx_dynamic.dylib" and similarly for iossim. Clang driver then sets the "-rpath" to be the real path to where clang currently has the dylib (because clang uses the relative path to its current executable). This means if you move the compiler or install the binary release, -fsanitize=address will link to the proper library.
Reviewed at http://reviews.llvm.org/D6018
llvm-svn: 221278
When compiling with -mfpu=vfpv3, those tests began to pass, like the others
with "Illegal Instruction" error, so removing the XFAIL from them should
get the bot green (and have more tests!).
llvm-svn: 219721
cmake/config-ix.cmake: Enabled building of asan for mipsel arch
test/asan/CMakeLists.txt: Enabled testing of asan for mipsel
Patch by Kumar Sukhani
Differential Revision: http://reviews.llvm.org/D5615
llvm-svn: 219496
ASAN, UBSAN and profile tests that don't work with arm-linux-gnueabi and
android also don't work on armv7l-linux-gnueabihf. Some of the tests have
known causes, others not yet. In order to get a green bot, I'm disabling
those tests for now and will investigate when the priority rises.
llvm-svn: 219343
Summary: Fixed asan-asm-stacktrace-test.cc. Now it's supported on x86_64 and added test run when no debug info is generated.
Differential Revision: http://reviews.llvm.org/D5547
llvm-svn: 219200
There is some strange interaction between mmap limit and unlimited stack
(ulimit -s unlimited), which results in this test failing when run with
"make".
llvm-svn: 218764
This is needed so we can produce -i686- named libraries for
x86 Android (which is i686-linux-android).
An alternative solution would be keeping the "i386" name internally and
tweaking the OUTPUT_NAME of compiler-rt libraries.
llvm-svn: 218761
* Detect Android toolchain target arch and set correct runtime library name.
* Merged a lot of Android and non-Android code paths.
* Android is only supported in standalone build of compiler-rt now.
* Linking lsan-common in ASan-Android (makes lsan annotations work).
* Relying on -fsanitize=address linker flag when building tests (again,
unification with non-Android path).
* Runtime library moved from lib/asan to lib/linux.
llvm-svn: 218605
Reviewed at http://reviews.llvm.org/D4527
Fixed a test case failure on 32-bit Linux, I did right shift on intptr_t, instead it should have been uintptr_t.
llvm-svn: 218538
Reviewed at http://reviews.llvm.org/D4527
This patch is part of an effort to implement a more generic debugging API, as proposed in http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-July/074656.html, with first part reviewed at http://reviews.llvm.org/D4466. Now adding several new APIs: __asan_report_present, __asan_get_report_{pc,bp,sp,address,type,size,description}, __asan_locate_address. These return whether an asan report happened yet, the PC, BP, SP, address, access type (read/write), access size and bug description (e.g. "heap-use-after-free"), __asan_locate_address takes a pointer and tries to locate it, i.e. say whether it is a heap pointer, a global or a stack, or whether it's a pointer into the shadow memory. If global or stack, tries to also return the variable name, address and size. If heap, tries to return the chunk address and size. Generally these should serve as an alternative to "asan_describe_address", which only returns all the data in text form. Having an API to get these data could allow having debugging scripts/extensions that could show additional information about a variable/expression/pointer. Test cases in test/asan/TestCases/debug_locate.cc and test/asan/TestCasea/debug_report.cc.
llvm-svn: 218481
When dump_instruction_bytes=1 and the instruction pointer doesn't point to the zero page, ASan prints 16 bytes starting at the instruction point.
llvm-svn: 218243
Hal Finkel