This reverts commit r328676.
Commit r328676 broke the -no-integrated-as flag necessary to build Linux kernel with Clang:
$ cat t.c
void foo() {}
$ clang -no-integrated-as -c t.c -g
/tmp/t-dcdec5.s: Assembler messages:
/tmp/t-dcdec5.s:8: Error: file number less than one
clang-7.0: error: assembler command failed with exit code 1 (use -v to see invocation)
llvm-svn: 328699
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
Fixes the bug found by asan. Also XFAIL the new test for Darwin, which
is stuck on DWARF v2, and fix up other tests so they stop failing on
Windows. Last but not least, don't break "clang -g" of an assembler
file that has .file directives in it.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 328676
On Hexagon "x = y" is a syntax used in most instructions, and is not
treated as a directive.
Differential Revision: https://reviews.llvm.org/D44256
llvm-svn: 328635
Summary:
Some targets does not support labels inside debug sections, but support
references in form `section+offset`. Patch adds initial support
for this.
Reviewers: echristo, probinson, jlebar
Subscribers: llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D43943
llvm-svn: 328314
Summary:
This pass sinks COPY instructions into a successor block, if the COPY is not
used in the current block and the COPY is live-in to a single successor
(i.e., doesn't require the COPY to be duplicated). This avoids executing the
the copy on paths where their results aren't needed. This also exposes
additional opportunites for dead copy elimination and shrink wrapping.
These copies were either not handled by or are inserted after the MachineSink
pass. As an example of the former case, the MachineSink pass cannot sink
COPY instructions with allocatable source registers; for AArch64 these type
of copy instructions are frequently used to move function parameters (PhyReg)
into virtual registers in the entry block..
For the machine IR below, this pass will sink %w19 in the entry into its
successor (%bb.1) because %w19 is only live-in in %bb.1.
```
%bb.0:
%wzr = SUBSWri %w1, 1
%w19 = COPY %w0
Bcc 11, %bb.2
%bb.1:
Live Ins: %w19
BL @fun
%w0 = ADDWrr %w0, %w19
RET %w0
%bb.2:
%w0 = COPY %wzr
RET %w0
```
As we sink %w19 (CSR in AArch64) into %bb.1, the shrink-wrapping pass will be
able to see %bb.0 as a candidate.
With this change I observed 12% more shrink-wrapping candidate and 13% more dead copies deleted in spec2000/2006/2017 on AArch64.
Reviewers: qcolombet, MatzeB, thegameg, mcrosier, gberry, hfinkel, john.brawn, twoh, RKSimon, sebpop, kparzysz
Reviewed By: sebpop
Subscribers: evandro, sebpop, sfertile, aemerson, mgorny, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D41463
llvm-svn: 328237
This is mostly just plumbing to get a DWARFDataExtractor where we
compute abbr_offset so we can use getRelocatedValue.
This is part of PR36793.
llvm-svn: 328154
Summary:
When building the selection DAG we sometimes need to postpone
the handling of a dbg.value until the value it should refer to
is created. This is done by using the DanglingDebugInfoMap.
In the past this map has been limited to hold one dangling
dbg.value per value. This patch removes that restriction.
Reviewers: aprantl, rnk, probinson, vsk
Reviewed By: aprantl
Subscribers: Ka-Ka, llvm-commits, JDevlieghere
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D44610
llvm-svn: 328084
Summary:
Added a flag -no-dwarf-pub-sections, which allows to disable
emission of DWARF public sections.
Reviewers: probinson, echristo
Subscribers: aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D44385
llvm-svn: 327994
Summary:
DbgValue nodes were not transferred when integer DAG nodes were promoted. For example, if an i32 add node was promoted to an i64 add node by DAGTypeLegalizer::PromoteIntegerResult(), its DbgValue node was not transferred to the new node. The simple fix is to update SetPromotedInteger() to transfer DbgValues.
Add AArch64/dbg-value-i8.ll to test this change and fix ARM/debug-info-d16-reg.ll which had the wrong DILocalVariable nodes with arg numbers even though they are not for function parameters.
Patch by Se Jong Oh!
Reviewers: vsk, JDevlieghere, aprantl
Reviewed By: JDevlieghere
Subscribers: javed.absar, kristof.beyls, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D44546
llvm-svn: 327919
Now that almost all functionality of Apple's dsymutil has been
upstreamed, the open source variant can be used as a drop in
replacement. Hence we feel it's no longer necessary to have the llvm
prefix.
Differential revision: https://reviews.llvm.org/D44527
llvm-svn: 327790
This patch sorts local variables by lexical scope and emits them inside
an appropriate S_BLOCK32 CodeView symbol.
Differential Revision: https://reviews.llvm.org/D42926
llvm-svn: 327620
Summary:
Local values are constants, global addresses, and stack addresses that
can't be folded into the instruction that uses them. For example, when
storing the address of a global variable into memory, we need to
materialize that address into a register.
FastISel doesn't want to materialize any given local value more than
once, so it generates all local value materialization code at
EmitStartPt, which always dominates the current insertion point. This
allows it to maintain a map of local value registers, and it knows that
the local value area will always dominate the current insertion point.
The downside is that local value instructions are always emitted without
a source location. This is done to prevent jumpy line tables, but it
means that the local value area will be considered part of the previous
statement. Consider this C code:
call1(); // line 1
++global; // line 2
++global; // line 3
call2(&global, &local); // line 4
Today we end up with assembly and line tables like this:
.loc 1 1
callq call1
leaq global(%rip), %rdi
leaq local(%rsp), %rsi
.loc 1 2
addq $1, global(%rip)
.loc 1 3
addq $1, global(%rip)
.loc 1 4
callq call2
The LEA instructions in the local value area have no source location and
are treated as being on line 1. Stepping through the code in a debugger
and correlating it with the assembly won't make much sense, because
these materializations are only required for line 4.
This is actually problematic for the VS debugger "set next statement"
feature, which effectively assumes that there are no registers live
across statement boundaries. By sinking the local value code into the
statement and fixing up the source location, we can make that feature
work. This was filed as https://bugs.llvm.org/show_bug.cgi?id=35975 and
https://crbug.com/793819.
This change is obviously not enough to make this feature work reliably
in all cases, but I felt that it was worth doing anyway because it
usually generates smaller, more comprehensible -O0 code. I measured a
0.12% regression in code generation time with LLC on the sqlite3
amalgamation, so I think this is worth doing.
There are some special cases worth calling out in the commit message:
1. local values materialized for phis
2. local values used by no-op casts
3. dead local value code
Local values can be materialized for phis, and this does not show up as
a vreg use in MachineRegisterInfo. In this case, if there are no other
uses, this patch sinks the value to the first terminator, EH label, or
the end of the BB if nothing else exists.
Local values may also be used by no-op casts, which adds the register to
the RegFixups table. Without reversing the RegFixups map direction, we
don't have enough information to sink these instructions.
Lastly, if the local value register has no other uses, we can delete it.
This comes up when fastisel tries two instruction selection approaches
and the first materializes the value but fails and the second succeeds
without using the local value.
Reviewers: aprantl, dblaikie, qcolombet, MatzeB, vsk, echristo
Subscribers: dotdash, chandlerc, hans, sdardis, amccarth, javed.absar, zturner, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D43093
llvm-svn: 327581
Make sure that DWARF line information generated by Windows can be properly read by Posix OS and vice versa.
Differential Revision: https://reviews.llvm.org/D44290
llvm-svn: 327430
Codeview references to unnamed structs and unions are expected to refer to the
complete type definition instead of a forward reference so Visual Studio can
resolve the type properly.
Differential Revision: https://reviews.llvm.org/D32498
llvm-svn: 327397
Summary:
1) Make sure to discard dangling debug info if the variable (or
variable fragment) is mapped to something new before we had a
chance to resolve the dangling debug info.
2) When resolving debug info, make sure to bump the associated
SDNodeOrder to ensure that the DBG_VALUE is emitted after the
instruction that defines the value used in the DBG_VALUE.
This will avoid a debug-use before def scenario as seen in
https://bugs.llvm.org/show_bug.cgi?id=36417.
The new test case, test/DebugInfo/X86/sdag-dangling-dbgvalue.ll,
show some other limitations in how dangling debug info is
handled in the SelectionDAG. Since we currently only support
having one dangling dbg.value per Value, we will end up dropping
debug info when there are more than one variable that is described
by the same "dangling value".
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: aprantl, eraman, llvm-commits, JDevlieghere
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D44369
llvm-svn: 327303
There is no point in lowering a dbg.declare describing an alloca that
has volatile loads or stores as users, since the alloca cannot be
elided. Lowering the dbg.declare will result in larger debug info that
may also have worse coverage than just describing the alloca.
rdar://problem/34496278
llvm-svn: 327092
Summary:
This patch adds the DW_AT_byte_size dwarf attribute to vectors.
This fixes PR21924
LLVM will round a vector up to the next alignable address, which can result in
the vector's representation in the object file being larger than what the
debugger will calculate via NumberOfElements * ElementSize. In such a case calling sizeof(MyVec) in the source will result in a different value than what a debugger might present. This situation can occur because LLVM permits non-power of two 'vector_size' attributes.
Reviewers: echristo, dexonsmith, aprantl
Reviewed By: aprantl
Subscribers: probinson, aprantl, llvm-commits, JDevlieghere
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D44048
llvm-svn: 327072
Instead of only printing the CU-relative offset in non-verbose mode, it
makes more sense to only printed the resolved address. In verbose mode
we still print both.
Differential revision: https://reviews.llvm.org/D44148
rdar://33525475
llvm-svn: 326903
Fixes the bug found by asan. Also XFAIL the new test for Darwin,
which is stuck on DWARF v2, and fix up other tests so they stop
failing on Windows.
llvm-svn: 326839
Summary:
- Emit UdtSourceLine information for enums to match MSVC
- Add a method to add UDTSrcLine and call it for all Class/Struct/Union/Enum
- Update test cases to verify the changes
Reviewers: zturner, llvm-commits, rnk
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D44116
llvm-svn: 326824
Summary:
This is a workaround for pr36417
https://bugs.llvm.org/show_bug.cgi?id=36417
LiveDebugVariables will now verify that the DBG_VALUE instructions
are sane (prior to register allocation) by asking LIS if a virtual
register used in the DBG_VALUE is live (or dead def) in the slot
index before the DBG_VALUE. If it isn't sane the DBG_VALUE is
discarded.
One pass that was identified as introducing non-sane DBG_VALUE
instructtons, when analysing pr36417, was the DAG->DAG Instruction
Selection. It sometimes inserts DBG_VALUE instructions referring to
a virtual register that is defined later in the same basic block.
So it is a use before def kind of problem. The DBG_VALUE is
typically inserted in the beginning of a basic block when this
happens. The problem can be seen in the test case
test/DebugInfo/X86/dbg-value-inlined-parameter.ll
Reviewers: aprantl, rnk, probinson
Reviewed By: aprantl
Subscribers: vsk, davide, alexcrichton, Ka-Ka, eraman, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D43956
llvm-svn: 326769
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 326758
The fast/linear DAG scheduler doesn't lower DBG_VALUEs except for
function entry nodes.
Patch by Joshua Cranmer!
Differential Revision: https://reviews.llvm.org/D43028
llvm-svn: 326631
Masking first, prevents the extend from being combine with loads. Its also interfering with some vXi1 extraction code.
Differential Revision: https://reviews.llvm.org/D42679
llvm-svn: 326500
Summary:
Some targets does not support labels inside debug sections, but support
references in form `section +|- offset`. Patch adds initial support
for this. Also, this patch disables emission of all additional debug
sections that may have labels inside of it (like pub sections and
string tables).
Reviewers: probinson, echristo
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D43627
llvm-svn: 326328
Qualifiers on a pointer or reference type may apply to either the
pointee or the pointer itself. Consider 'const char *' and 'char *
const'. In the first example, the pointee data may not be modified
without casts, and in the second example, the pointer may not be updated
to point to new data.
In the general case, qualifiers are applied to types with LF_MODIFIER
records, which support the usual const and volatile qualifiers as well
as the __unaligned extension qualifier.
However, LF_POINTER records, which are used for pointers, references,
and member pointers, have flags for qualifiers applying to the
*pointer*. In fact, this is the only way to represent the restrict
qualifier, which can only apply to pointers, and cannot qualify regular
data types.
This patch causes LLVM to correctly fold 'const' and 'volatile' pointer
qualifiers into the pointer record, as well as adding support for
'__restrict' qualifiers in the same place.
Based on a patch from Aaron Smith
Differential Revision: https://reviews.llvm.org/D43060
llvm-svn: 326260
When attempting to compile the following Objective-C++ code with
CodeView debug info:
void (^b)(void) = []() {};
The generated debug metadata contains a structure like the following:
!43 = !DICompositeType(tag: DW_TAG_structure_type, name: "__block_literal_1", scope: !6, file: !6, line: 1, size: 168, elements: !44)
!44 = !{!45, !46, !47, !48, !49, !52}
...
!52 = !DIDerivedType(tag: DW_TAG_member, scope: !6, file: !6, line: 1, baseType: !53, size: 8, offset: 160, flags: DIFlagPublic)
!53 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !54)
!54 = !DICompositeType(tag: DW_TAG_class_type, file: !6, line: 1, flags: DIFlagFwdDecl)
Note that the member node (!52) is unnamed, but rather than pointing to
a DICompositeType directly, it points to a DIDerivedType with tag
DW_TAG_const_type, which then points to the DICompositeType. However,
the CodeView assembly printer currently assumes that the base type for
an unnamed member will always be a DICompositeType, and attempts to
perform that cast, which triggers an assertion failure, since in this
case the base type is actually a DIDerivedType, not a DICompositeType
(and we would have to get the base type of the DIDerivedType to reach
the DICompositeType). I think the debug metadata being generated by the
frontend is correct (or at least plausible), and the CodeView printer
needs to handle this case.
This patch teaches the CodeView printer to unwrap any qualifier types.
The qualifiers are just dropped for now. Ideally, they would be applied
to the added indirect members instead, but this occurs infrequently
enough that adding the logic to handle the qualifiers correctly isn't
worth it for now. A FIXME is added to note this.
Additionally, Reid pointed out that the underlying assumption that an
unnamed member must be a composite type is itself incorrect and may not
hold for all frontends. Therefore, after all qualifiers have been
stripped, check if the resulting type is in fact a DICompositeType and
just return if it isn't, rather than assuming the type and crashing if
that assumption is violated.
Differential Revision: https://reviews.llvm.org/D43803
llvm-svn: 326255
Re-enable commit r323991 now that r325931 has been committed to make
MachineOperand::isRenamable() check more conservative w.r.t. code
changes and opt-in on a per-target basis.
llvm-svn: 326208
In DWARF v5 the Line Number Program Header is extensible, allowing values with
new content types. In this extension a content type is added,
DW_LNCT_LLVM_source, which contains the embedded source code of the file.
Add new optional attribute for !DIFile IR metadata called source which contains
source text. Use this to output the source to the DWARF line table of code
objects. Analogously extend METADATA_FILE in Bitcode and .file directive in ASM
to support optional source.
Teach llvm-dwarfdump and llvm-objdump about the new values. Update the output
format of llvm-dwarfdump to make room for the new attribute on file_names
entries, and support embedded sources for the -source option in llvm-objdump.
Differential Revision: https://reviews.llvm.org/D42765
llvm-svn: 325970
This patch reverts r325440 and r325438 because it triggers an
assertion in SelectionDAGBuilder.cpp. Also having debug enabled
may unintentionally affect code-gen. The patch is reverted until
we find a better solution.
llvm-svn: 325825
Summary:
If there is no debug info for macros, do not emit labels for empty
macinfo sections.
Reviewers: probinson, echristo
Subscribers: aprantl, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D43589
llvm-svn: 325803
Summary:
https://llvm.org/PR36263 shows that when compiling at -O0 a dbg.value()
instruction (that remains from an original dbg.declare()) is dropped
by FastISel. Since FastISel selects instructions by iterating a basic
block backwards, it drops the dbg.value if one of its operands is not
yet instantiated by a previously selected instruction.
Instead of calling 'lookUpRegForValue()' we can call 'getRegForValue()'
instead that will insert a placeholder for the operand to be filled in
when continuing the instruction selection.
Reviewers: aprantl, dblaikie, probinson
Reviewed By: aprantl
Subscribers: llvm-commits, dstenb, JDevlieghere
Differential Revision: https://reviews.llvm.org/D43386
llvm-svn: 325438
Summary:
The assert for a DISubrange's CountVarDIE to be available fails
when the dbg.value() has been optimized away for any reason.
Having the assert for that is a little heavy, so instead removing
it now in favor of not generating the 'count' expression.
Addresses http://llvm.org/PR36263 .
Reviewers: aprantl, dblaikie, probinson
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits, dstenb
Differential Revision: https://reviews.llvm.org/D43387
llvm-svn: 325427
This reverts commit r323991.
This commit breaks target that don't model all the register constraints
in TableGen. So far the workaround was to set the
hasExtraXXXRegAllocReq, but it proves that it doesn't cover all the
cases.
For instance, when mutating an instruction (like in the lowering of
COPYs) the isRenamable flag is not properly updated. The same problem
will happen when attaching machine operand from one instruction to
another.
Geoff Berry is working on a fix in https://reviews.llvm.org/D43042.
llvm-svn: 325421
The prologue-end line record must be emitted after the last
instruction that is part of the function frame setup code and before
the instruction that marks the beginning of the function body.
Patch by Carlos Alberto Enciso!
Differential Revision: https://reviews.llvm.org/D41762
llvm-svn: 325143
If a function doesn't have an exact definition, don't apply debugify
metadata as it triggers a DIVerifier failure.
The issue is that it's invalid to have DILocations inside a DISubprogram
which isn't a definition ("scope points into the type hierarchy!").
llvm-svn: 325036
Instead of reserving 0xF00 bytes for the fixed length portion of the CodeView
symbol name, calculate the actual length of the fixed length portion.
Differential Revision: https://reviews.llvm.org/D42125
llvm-svn: 324850
This addresses review feedback for D42940. The topological sort is
slightly more expensive but it can now also detect cycles in the
dependencies and actually works correctly.
rdar://problem/37217988
Differential Review: https://reviews.llvm.org/D43036
llvm-svn: 324677
Emitting the correct (root of compilation) file at index 0 will be
posted for review later; I wanted to get this minor change out of the
way first.
llvm-svn: 324669
This patch is the LLVM part of fixing the issues, described in
https://bugs.llvm.org/show_bug.cgi?id=36168
* The representation of enumerator values in the debug info metadata now
contains a boolean flag isUnsigned, which determines how the bits of
the value are interpreted.
* The DW_TAG_enumeration type DIE now always (for DWARF version >= 3)
includes a DW_AT_type attribute, which refers to the underlying
integer type, as suggested in DWARFv4 (5.7 Enumeration Type Entries).
* The debug info metadata for enumeration type contains (in flags)
indication whether this is a C++11 "fixed enum".
* For C++11 enumeration with a fixed underlying type, the DIE also
includes the DW_AT_enum_class attribute (for DWARF version >= 4).
* Encoding of enumerator constants uses DW_FORM_sdata for signed values
and DW_FORM_udata for unsigned values, as suggested by DWARFv4 (7.5.4
Attribute Encodings).
The changes should be backwards compatible:
* the isUnsigned attribute is optional and defaults to false.
* if the underlying type for the enumeration is not available, the
enumerator values are considered signed.
* the FixedEnum flag defaults to clear.
* the bitcode format for DIEnumerator stores the unsigned flag bit #1 of
the first record element, so the format does not change and the zero
previously stored there is consistent with the false default for
IsUnsigned.
Differential Revision: https://reviews.llvm.org/D42734
llvm-svn: 324489
n Rust, an enum that carries data in the variants is, essentially, a
discriminated union. Furthermore, the Rust compiler will perform
space optimizations on such enums in some situations. Previously,
DWARF for these constructs was emitted using a hack (a magic field
name); but this approach stopped working when more space optimizations
were added in https://github.com/rust-lang/rust/pull/45225.
This patch changes LLVM to allow discriminated unions to be
represented in DWARF. It adds createDiscriminatedUnionType and
createDiscriminatedMemberType to DIBuilder and then arranges for this
to be emitted using DWARF's DW_TAG_variant_part and DW_TAG_variant.
Note that DWARF requires that a discriminated union be represented as
a structure with a variant part. However, as Rust only needs to emit
pure discriminated unions, this is what I chose to expose on
DIBuilder.
Patch by Tom Tromey!
Differential Revision: https://reviews.llvm.org/D42082
llvm-svn: 324426
VLAs may refer to a previous DIE to express the DW_AT_count of their
type. Clang generates an artificial "vla_expr" variable for this. If
this DIE hasn't been created yet LLVM asserts. This patch fixes this
by sorting the local variables so that dependencies come before they
are needed. It also replaces the linear scan in DWARFFile with a
std::map, which can be faster.
Differential Revision: https://reviews.llvm.org/D42940
llvm-svn: 324412
The major visible difference here is that in line-table dumps,
directory and file names are wrapped in double-quotes; previously,
directory names got single quotes and file names were not quoted at
all.
The improvement in this patch is that when a DWARF v5 line table
header has indirect strings, in a verbose dump these will all have
their section[offset] printed as well as the name itself. This
matches the format used for dumping strings in the .debug_info
section.
Differential Revision: https://reviews.llvm.org/D42802
llvm-svn: 324270
Summary:
When creating the debug fragments for a SRA'd variable, use the types'
allocation sizes. This fixes issues where the pass would emit too small
fragments, placed at the wrong offset, for padded types.
An example of this is long double on x86. The type is represented using
x86_fp80, which is 10 bytes, but the value is aligned to 12/16 bytes.
The padding is included in the type's DW_AT_byte_size attribute;
therefore, the fragments should also include that. Newer GCC releases
(I tested 7.2.0) emit 12/16-byte pieces for long double. Earlier
releases, e.g. GCC 5.5.0, behaved as LLVM did, i.e. by emitting a
10-byte piece, followed by an empty 2/6-byte piece for the padding.
Failing to cover all `DW_AT_byte_size' bytes of a value with non-empty
pieces results in the value being printed as <optimized out> by GDB.
Patch by: David Stenberg
Reviewers: aprantl, JDevlieghere
Reviewed By: aprantl, JDevlieghere
Subscribers: llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D42807
llvm-svn: 324066
Increment the field list member count for base classes and virtual base
classes.
Differential Revision: https://reviews.llvm.org/D41874
llvm-svn: 324000
Summary:
This change extends MachineCopyPropagation to do COPY source forwarding
and adds an additional run of the pass to the default pass pipeline just
after register allocation.
This version of this patch uses the newly added
MachineOperand::isRenamable bit to avoid forwarding registers is such a
way as to violate constraints that aren't captured in the
Machine IR (e.g. ABI or ISA constraints).
This change is a continuation of the work started in D30751.
Reviewers: qcolombet, javed.absar, MatzeB, jonpa, tstellar
Subscribers: tpr, mgorny, mcrosier, nhaehnle, nemanjai, jyknight, hfinkel, arsenm, inouehrs, eraman, sdardis, guyblank, fedor.sergeev, aheejin, dschuff, jfb, myatsina, llvm-commits
Differential Revision: https://reviews.llvm.org/D41835
llvm-svn: 323991
Discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html
In preparation for adding support for named vregs we are changing the sigil for
physical registers in MIR to '$' from '%'. This will prevent name clashes of
named physical register with named vregs.
llvm-svn: 323922
r323476 added support for DW_FORM_line_strp, and incorrectly made that
depend on having a DWARFUnit available. We shouldn't be tracking
.debug_line_str in DWARFUnit after all. After this patch, I can do an
NFC follow up and undo a bunch of the "plumbing" part of r323476.
Differential Revision: https://reviews.llvm.org/D42609
llvm-svn: 323691
Summary:
When emitting the location for a global variable with fragmented debug
expressions, make sure that the offset pieces, which represent
optimized-out parts of the variable, are emitted before their succeeding
fragments' expressions. Previously, if the succeeding fragment's
location was a symbol, the offset piece was emitted after, rather than
before, that symbol's expression. This effectively meant that the symbols
were associated with the wrong parts of the variable.
This fixes PR36085.
Patch by: David Stenberg
Reviewers: aprantl, probinson, dblaikie
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D42527
llvm-svn: 323644
Summary:
This modifies the dwarfdump output to align it with the new .debug_names
dump. It also renames two header fields to match similar fields in the
dwarf5 header.
A couple of tests needed to be updated to match new output. The changes
were fairly straight-forward, although not really automatable.
Reviewers: JDevlieghere, aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42415
llvm-svn: 323641
Summary:
This commit renames DWARFAcceleratorTable to AppleAcceleratorTable to free up
the first name as an interface for the different accelerator tables.
Then I add a DWARFDebugNames class for the dwarf5 table.
Presently, the only common functionality of the two classes is the dump()
method, because this is the only method that was necessary to implement
dwarfdump -debug-names; and because the rest of the
AppleAcceleratorTable interface does not directly transfer to the dwarf5
tables (the main reason for that is that the present interface assumes
the tables are homogeneous, but the dwarf5 tables can have different
keys associated with each entry).
I expect to make the common interface richer as I add more functionality
to the new class (and invent a way to represent it in generic way).
In terms of sharing the implementation, I found the format of the two
tables sufficiently different to frustrate any attempts to have common
parsing or dumping code, so presently the implementations share just low
level code for formatting dwarf constants.
Reviewers: vleschuk, JDevlieghere, clayborg, aprantl, probinson, echristo, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42297
llvm-svn: 323638
Summary: This is the producer side for DWARF v5 string offsets tables. The reader/consumer
side was committed with r321295. All compile and type units in a module share a
contribution to the string offsets table. Indirect strings use the strx{1,2,3,4} index forms.
Reviewers: dblaikie, aprantl, JDevliegehere
Differential Revision: https://reviews.llvm.org/D42021
llvm-svn: 323546
This form is like DW_FORM_strp, but points to .debug_line_str instead
of .debug_str as the string section. It's intended to be used from
the line-table header, and allows string-pooling of directory and
filenames across compilation units.
Differential Revision: https://reviews.llvm.org/D42553
llvm-svn: 323476
Summary:
When creating the debug fragments for a SRA'd struct, use the fields'
offsets, taken from the struct layout, as the offsets for the resulting
fragments. This fixes an issue where GlobalOpt would emit fragments with
incorrect offsets for padded fields.
This should solve PR36016.
Patch by David Stenberg.
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42489
llvm-svn: 323411
Summary:
This patch implements the codegen of DWARF debug info for non-constant
'count' fields for DISubrange.
This is patch [2/3] in a series to extend LLVM's DISubrange Metadata
node to support debugging of C99 variable length arrays and vectors with
runtime length like the Scalable Vector Extension for AArch64. It is
also a first step towards representing more complex cases like arrays
in Fortran.
Reviewers: echristo, pcc, aprantl, dexonsmith, clayborg, kristof.beyls, dblaikie
Reviewed By: aprantl
Subscribers: fhahn, aemerson, rengolin, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D41696
llvm-svn: 323323
Opt's "-enable-debugify" mode adds an instance of Debugify at the
beginning of the pass pipeline, and an instance of CheckDebugify at the
end.
You can enable this mode with lit using: -Dopt="opt -enable-debugify".
Note that running test suites in this mode will result in many failures
due to strict FileCheck commands, etc.
It can be more useful to look for assertion failures which arise only
when Debugify is enabled, e.g to prove that we have (or do not have)
test coverage for some code path with debug info present.
Differential Revision: https://reviews.llvm.org/D41793
llvm-svn: 323256
The compilation directory has always been #0, but as of DWARF v5 it is
explicitly listed in the line-table section instead of implicitly
being a reference to the compile_unit DIE's DW_AT_comp_dir attribute.
This means the dumper should number the dumped array starting with 0
or 1 depending on the DWARF version of the line table.
References in the generated DWARF are correct, it's just the dumper
that was wrong. Also some assembler-coded tests were similarly
confused about directory numbers.
llvm-svn: 322884
Summary:
Currently -glldb turns on emission of apple tables on all targets, but
lldb is only really capable of consuming them on darwin. Furthermore,
making lldb consume these tables is not straight-forward because of the
differences in how the debug info is distributed on darwin vs. elf
targets.
The darwin debug model assumes that the debug info (along with
accelerator tables) will either remain in the .o files or it will be
linked into a dsym bundle by a linker that knows how to merge these
tables. In the elf world, all present linkers will simply concatenate
these accelerator tables into the shared object. Since the tables are
not self-terminating, this renders the tables unusable, as the debugger
cannot pry the individual tables apart anymore.
It might theoretically be possible to make the tables work with split
dwarf, as that is somewhat similar to the apple .o model, but
unfortunately right now the combination of -glldb and -gsplit-dwarf
produces broken object files.
Until these issues are resolved there is no point in emitting the apple
tables for these targets. At best, it wastes space; at worst, it breaks
compilation and prevents the user from getting other benefits of -glldb.
Reviewers: probinson, aprantl, dblaikie
Subscribers: emaste, dim, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D41986
llvm-svn: 322633
Summary:
In a follow-up commit I'll change the rules for emission of accelerator
tables, which means we won't be able to use them as a litmus test for
the debugger tuning options. Instead of sections, I base the test on the
presence/absence of some debug info attributes and opcodes:
LLDB - prefers DW_OP_form_tls_address and uses DW_AT_APPLE_optimized
GDB - prefers DW_OP_GNU_push_tls_address and does not use the optimized
attribute
SCE - prefers DW_OP_form_tls_address and does not use the optimized
attribute
Reviewers: probinson, aprantl, dblaikie
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D41985
llvm-svn: 322630
Current condition for spill instruction recognition in LiveDebugValues does
not recognize case when register is spilled and killed in next instruction.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D41226
llvm-svn: 322554
This patch fixes the assertion failure in SROA reported in PR35657.
PR35657 reports the assertion failure due to r319522 (splitting for non-whole-alloca slices), but this problem can happen even without r319522.
The problem exists in a check for reusing an existing alloca when rewriting partitions. As the original comment said, we can reuse the existing alloca if the new alloca has the same type and offset with the existing one. But the code checks only type of the alloca and then check the offset using an assert.
In a corner case with out-of-bounds access (e.g. @PR35657 function added in unit test), it is possible that the two allocas have the same type but different offsets.
This patch makes the check of the offset in the if condition, and re-enables the splitting for non-whole-alloca slices.
Differential Revision: https://reviews.llvm.org/D41981
llvm-svn: 322533
Summary:
- MSVC uses the none type for a variadic argument in CodeView
- Add a unit test
Reviewers: zturner, llvm-commits
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D41931
llvm-svn: 322257
Add test/DebugInfo/MIR/Mips/lit.local.cfg so no tests are run if Mips is
not a supported target.
This should resolve buildbot failures seen after r322015.
llvm-svn: 322020
The last iterator of MBB should be recognized as MBB.end() not as
MBB.instr_end() which could return bundled instruction that is not iterable
with basic iterator.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D41626
llvm-svn: 322015
This had been reverted because the new test failed on non-X86 bots. I moved
the new test to the appropriate subdirectory to correct this.
Differential Revision: https://reviews.llvm.org/D41264
Original submission: r321122 (which was reverted by r321125)
This reverts commit 3c1639b5703c387a0d8cba2862803b4e68dff436.
llvm-svn: 321911
Summary:
This commit updates the BufferByteStreamer, used by DebugLocStream
to buffer bytes/comments to put in the debug_loc section, to
make sure that the Buffer and Comments vectors are synced.
Previously, when an SLEB128 or ULEB128 was emitted together with
a comment, the vectors could be out-of-sync if the LEB encoding
added several entries to the Buffer vectors, while we only added
a single entry to the Comments vector.
The goal with this is to get the comments in the debug_loc
section in the .s file correctly aligned.
Example (using ARM as target):
Instead of
.byte 144 @ sub-register DW_OP_regx
.byte 128 @ 256
.byte 2 @ DW_OP_piece
.byte 147 @ 8
.byte 8 @ sub-register DW_OP_regx
.byte 144 @ 257
.byte 129 @ DW_OP_piece
.byte 2 @ 8
.byte 147 @
.byte 8 @
we now get
.byte 144 @ sub-register DW_OP_regx
.byte 128 @ 256
.byte 2 @
.byte 147 @ DW_OP_piece
.byte 8 @ 8
.byte 144 @ sub-register DW_OP_regx
.byte 129 @ 257
.byte 2 @
.byte 147 @ DW_OP_piece
.byte 8 @ 8
Reviewers: JDevlieghere, rnk, aprantl
Reviewed By: aprantl
Subscribers: davide, Ka-Ka, uabelho, aemerson, javed.absar, kristof.beyls, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D41763
llvm-svn: 321907
This implements the DWARF 5 feature described at
http://www.dwarfstd.org/ShowIssue.php?issue=141215.1
This allows a consumer to understand whether a composite data type is
trivially copyable and thus should be passed by value instead of by
reference. The canonical example is being able to distinguish the
following two types:
// S is not trivially copyable because of the explicit destructor.
struct S {
~S() {}
};
// T is a POD type.
struct T {
~T() = default;
};
This patch adds two new (DI)flags to LLVM metadata: TypePassByValue
and TypePassByReference.
<rdar://problem/36034922>
Differential Revision: https://reviews.llvm.org/D41743
llvm-svn: 321844
Tests updated to explicitly use fast-isel at -O0 instead of implicitly.
This change also allows an explicit -fast-isel option to override an
implicitly enabled global-isel. Otherwise -fast-isel would have no effect at -O0.
Differential Revision: https://reviews.llvm.org/D41362
llvm-svn: 321655
Reorganizes the DWARF consumer to derive the string offsets table
contribution's format from the contribution header instead of
(incorrectly) from the unit's format.
Reviewers: JDevliegehere, aprantl
Differential Revision: https://reviews.llvm.org/D41146
llvm-svn: 321295
It appears the code uses nullptr to represent a void type in debug metadata,
which led to an assertion failure when building DeltaAlgorithm.cpp with a
self-hosted clang on Windows.
I'm not sure why/if the problem was Windows-specific.
Fixes bug https://bugs.llvm.org/show_bug.cgi?id=35543
Differential Revision: https://reviews.llvm.org/D41264
llvm-svn: 321122
Adds missing support for DW_FORM_data16.
Update of r320852/r320886, fixing the unittest again, this time use a
raw char string for the test data.
Differential Revision: https://reviews.llvm.org/D41090
llvm-svn: 321011
This patch introduce a switch to control splitting of non-whole-alloca slices with default off.
The switch will be default on again after fixing an issue reported in PR35657.
llvm-svn: 320958
Adds missing support for DW_FORM_data16.
Update of r320852, fixing the unittest to use a hand-coded struct
instead of std::array to guarantee data layout.
Differential Revision: https://reviews.llvm.org/D41090
llvm-svn: 320886
While investigating LLVM PR22316 (http://llvm.org/bugs/show_bug.cgi?id=22316)
I started wondering if it were not always preferable to emit the
initial DBG_VALUEs for stack arguments as FI locations instead of
describing the first register they get copied into. The advantage of
doing this is that the arguments will be available as soon as the
stack is setup. As illustrated by the testcase in the PR, the first
copy of the FI into a register may be sunk by MachineSink.cpp into a
later basic block. By describing the argument on the stack, we nicely
circumvent this problem.
<rdar://problem/19583723>
Differential Revision: https://reviews.llvm.org/D41135
llvm-svn: 320758
This should solve:
https://bugs.llvm.org/show_bug.cgi?id=34603
...by preventing SimplifyCFG from altering redundant instructions before early-cse has a chance to run.
It changes the default (canonical-forming) behavior of SimplifyCFG, so we're only doing the
sinking transform later in the optimization pipeline.
Differential Revision: https://reviews.llvm.org/D38566
llvm-svn: 320749
Currently this is an LLVM extension to the COFF spec which is
experimental and intended to speed up linking. For now it is
behind a hidden cl::opt flag, but in the future we can move it
to a "real" cc1 flag and have the driver pass it through whenever
it is appropriate.
The patch to actually make use of this section in lld will come
in a followup.
Differential Revision: https://reviews.llvm.org/D40917
llvm-svn: 320649
Summary:
Add isRenamable() predicate to MachineOperand. This predicate can be
used by machine passes after register allocation to determine whether it
is safe to rename a given register operand. Register operands that
aren't marked as renamable may be required to be assigned their current
register to satisfy constraints that are not captured by the machine
IR (e.g. ABI or ISA constraints).
Reviewers: qcolombet, MatzeB, hfinkel
Subscribers: nemanjai, mcrosier, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D39400
llvm-svn: 320503
The function stack poisioner conditionally stores local variables
either in an alloca or in malloc'ated memory, which has the
unfortunate side-effect, that the actual address of the variable is
only materialized when the variable is accessed, which means that
those variables are mostly invisible to the debugger even when
compiling without optimizations.
This patch stores the address of the local stack base into an alloca,
which can be referred to by the debug info and is available throughout
the function. This adds one extra pointer-sized alloca to each stack
frame (but mem2reg can optimize it away again when optimizations are
enabled, yielding roughly the same debug info quality as before in
optimized code).
rdar://problem/30433661
Differential Revision: https://reviews.llvm.org/D41034
llvm-svn: 320415
This fixes a bug where the verifier was complaining about empty
accelerator tables. When the table is empty, its size is not a valid
offset as it points after the end of the section.
This patch also makes the extractor return llvm:Error instead of bool
for better error reporting in the verifier.
Differential revision: https://reviews.llvm.org/D41063
rdar://35932007
llvm-svn: 320399
The Debugify pass synthesizes debug info for IR. It's paired with a
CheckDebugify pass which determines how much of the original debug info
is preserved. These passes make it easier to create targeted tests for
debug info preservation.
Here is the Debugify algorithm:
NextLine = 1
for (Instruction &I : M)
attach DebugLoc(NextLine++) to I
NextVar = 1
for (Instruction &I : M)
if (canAttachDebugValue(I))
attach dbg.value(NextVar++) to I
The CheckDebugify pass expects contiguous ranges of DILocations and
DILocalVariables. If it fails to find all of the expected debug info, it
prints a specific error to stderr which can be FileChecked.
This was discussed on llvm-dev in the thread:
"Passes to add/validate synthetic debug info"
Differential Revision: https://reviews.llvm.org/D40512
llvm-svn: 320202
As we emit different linetables format on different operating
systems, this currently fails on linux. Speculative commit
to fix the bots.
llvm-svn: 319997
dsymutil doesn't yet understand the new format and the change,
among others, breaks a large fraction of the debugger tests on
mac OS.
rdar://problem/35856354
llvm-svn: 319995
Since the local hash is a different number of bytes depending
on host architecture, we don't have a consistent value. I
will need to re-do this test for both x86 and x64. For now
it accepts any value for the local hash.
llvm-svn: 319864
Set the .debug_line version to match the requested DWARF version,
except with a maximum of v4 because we don't support v5 yet.
Previously Chromium had issues with this patch; see PR31407. Chromium
tool issues have been addressed, so hopefully this will go through
this time.
Patch by Katya Romanova!
Differential Revision: https://reviews.llvm.org/D38002
llvm-svn: 319699
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
As part of the unification of the debug format and the MIR format, avoid
printing "vreg" for virtual registers (which is one of the current MIR
possibilities).
Basically:
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/%vreg([0-9]+)/%\1/g"
* grep -nr '%vreg' . and fix if needed
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/ vreg([0-9]+)/ %\1/g"
* grep -nr 'vreg[0-9]\+' . and fix if needed
Differential Revision: https://reviews.llvm.org/D40420
llvm-svn: 319427
Currently, SROA splits loads and stores only when they are accessing the whole alloca.
This patch relaxes this limitation to allow splitting a load/store if all other loads and stores to the alloca are disjoint to or fully included in the current load/store. If there is no other load or store that crosses the boundary of the current load/store, the current splitting implementation works as is.
The whole-alloca loads and stores meet this new condition and so they are still splittable.
Here is a simplified motivating example.
struct record {
long long a;
int b;
int c;
};
int func(struct record r) {
for (int i = 0; i < r.c; i++)
r.b++;
return r.b;
}
When updating r.b (or r.c as well), LLVM generates redundant instructions on some platforms (such as x86_64, ppc64); here, r.b and r.c are packed into one 64-bit GPR when the struct is passed as a method argument.
With this patch, the above example is compiled into only few instructions without loop.
Without the patch, unnecessary loop-carried dependency is introduced by SROA and the loop cannot be eliminated by the later optimizers.
Differential Revision: https://reviews.llvm.org/D32998
llvm-svn: 319407
An alloca may be larger than a variable that is described to be stored
there. Don't create a dbg.value for fragments that are outside of the
variable.
This fixes PR35447.
https://bugs.llvm.org/show_bug.cgi?id=35447
llvm-svn: 319230
The motivation behind this patch is that future directions require us to
be able to compute the hash value of records independently of actually
using them for de-duplication.
The current structure of TypeSerializer / TypeTableBuilder being a
single entry point that takes an unserialized type record, and then
hashes and de-duplicates it is not flexible enough to allow this.
At the same time, the existing TypeSerializer is already extremely
complex for this very reason -- it tries to be too many things. In
addition to serializing, hashing, and de-duplicating, ti also supports
splitting up field list records and adding continuations. All of this
functionality crammed into this one class makes it very complicated to
work with and hard to maintain.
To solve all of these problems, I've re-written everything from scratch
and split the functionality into separate pieces that can easily be
reused. The end result is that one class TypeSerializer is turned into 3
new classes SimpleTypeSerializer, ContinuationRecordBuilder, and
TypeTableBuilder, each of which in isolation is simple and
straightforward.
A quick summary of these new classes and their responsibilities are:
- SimpleTypeSerializer : Turns a non-FieldList leaf type into a series of
bytes. Does not do any hashing. Every time you call it, it will
re-serialize and return bytes again. The same instance can be re-used
over and over to avoid re-allocations, and in exchange for this
optimization the bytes returned by the serializer only live until the
caller attempts to serialize a new record.
- ContinuationRecordBuilder : Turns a FieldList-like record into a series
of fragments. Does not do any hashing. Like SimpleTypeSerializer,
returns references to privately owned bytes, so the storage is
invalidated as soon as the caller tries to re-use the instance. Works
equally well for LF_FIELDLIST as it does for LF_METHODLIST, solving a
long-standing theoretical limitation of the previous implementation.
- TypeTableBuilder : Accepts sequences of bytes that the user has already
serialized, and inserts them by de-duplicating with a hash table. For
the sake of convenience and efficiency, this class internally stores a
SimpleTypeSerializer so that it can accept unserialized records. The
same is not true of ContinuationRecordBuilder. The user is required to
create their own instance of ContinuationRecordBuilder.
Differential Revision: https://reviews.llvm.org/D40518
llvm-svn: 319198
As part of the unification of the debug format and the MIR format,
always print registers as lowercase.
* Only debug printing is affected. It now follows MIR.
Differential Revision: https://reviews.llvm.org/D40417
llvm-svn: 319187
Shadow stack solution introduces a new stack for return addresses only.
The HW has a Shadow Stack Pointer (SSP) that points to the next return address.
If we return to a different address, an exception is triggered.
The shadow stack is managed using a series of intrinsics that are introduced in this patch as well as the new register (SSP).
The intrinsics are mapped to new instruction set that implements CET mechanism.
The patch also includes initial infrastructure support for IBT.
For more information, please see the following:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
Differential Revision: https://reviews.llvm.org/D40223
Change-Id: I4daa1f27e88176be79a4ac3b4cd26a459e88fed4
llvm-svn: 318996
As a side effect, the .debug_line section will be dumped in physical
order, rather than in the order that compile units refer to their
associated portions of the .debug_line section. These are probably
always the same order anyway, and no tests noticed the difference.
Differential Revision: https://reviews.llvm.org/D39854
llvm-svn: 318839
In constructAbstractSubprogramScopeDIE there can be a potential mismatch
between `this` and the CU of ContextDIE when a scope is shared between
two DISubprograms belonging to a different CU. In that case, `this` is
the CU that was specified in the IR, but the CU of ContextDIE is that of
the first subprogram that was emitted. This patch fixes the mismatch by
looking up the CU of ContextDIE, and switching to use that.
This fixes PR35212 (https://bugs.llvm.org/show_bug.cgi?id=35212)
Patch by Philip Craig!
Differential revision: https://reviews.llvm.org/D39981
llvm-svn: 318289
Summary:
The associated debug value is updated when the virtual source register
of a copy is completely eliminated and replaced with a rematerialize
value in the defed register of the copy. As the debug value now is
associated with another register it also need to be moved, otherwise
the debug value isn't valid.
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: MatzeB, llvm-commits, qcolombet
Differential Revision: https://reviews.llvm.org/D38024
llvm-svn: 317880
In Rust, a trait can be implemented for any type, and if a trait
object pointer is used for the type, then a virtual table will be
emitted for that trait/type combination.
We would like debuggers to be able to inspect trait objects, which
requires finding the concrete type associated with a given vtable.
This patch changes LLVM so that any type can be passed to
replaceVTableHolder. This allows the Rust compiler to emit the needed
debug info -- associating a vtable with the concrete type for which it
was emitted.
This is a DWARF extension: DWARF only specifies the meaning of
DW_AT_containing_type in one specific situation. This style of DWARF
extension is routine, though, and LLVM already has one such case for
DW_AT_containing_type.
Patch by Tom Tromey!
Differential Revision: https://reviews.llvm.org/D39503
llvm-svn: 317730
In 2010 a commit with no testcase and no further explanation
explicitly disabled the handling of inlined variables in
EmitFuncArgumentDbgValue(). I don't think there is a good reason for
this any more and re-enabling this adds debug locations for variables
associated with an LLVM function argument in functions that are
inlined into the first basic block. The only downside of doing this is
that we may insert a DBG_VALUE before the inlined scope, but (1) this
could be filtered out later, and (2) LiveDebugValues will not
propagate it into subsequent basic blocks if they don't dominate the
variable's lexical scope, so this seems like a small price to pay.
rdar://problem/26228128
llvm-svn: 317702
This preserves the debug info for the cast operation in the original location.
rdar://problem/33460652
Reapplied r317340 with the test moved into an ARM-specific directory.
llvm-svn: 317375
Change the map key from DIFile* to the absolute path string. Computing
the absolute path isn't expensive because we already have a map that
caches the full path keyed on DIFile*.
llvm-svn: 317041
Similar to how llvm::salvagDebugInfo hooks into InstCombine, this adds
a hook that can be invoked before an SDNode that is associated with an
SDDbgValue is erased to capture the effect of the deleted node in a
DIExpression.
The motivating example is an SDDebugValue attached to an ADD operation
that gets folded into a LOAD+OFFSET operation.
rdar://problem/32121503
llvm-svn: 316525
Summary:
This adds a set of new directives that describe 32-bit x86 prologues.
The directives are limited and do not expose the full complexity of
codeview FPO data. They are merely a convenience for the compiler to
generate more readable assembly so we don't need to generate tons of
labels in CodeGen. If our prologue emission changes in the future, we
can change the set of available directives to suit our needs. These are
modelled after the .seh_ directives, which use a different format that
interacts with exception handling.
The directives are:
.cv_fpo_proc _foo
.cv_fpo_pushreg ebp/ebx/etc
.cv_fpo_setframe ebp/esi/etc
.cv_fpo_stackalloc 200
.cv_fpo_endprologue
.cv_fpo_endproc
.cv_fpo_data _foo
I tried to follow the implementation of ARM EHABI CFI directives by
sinking most directives out of MCStreamer and into X86TargetStreamer.
This helps avoid polluting non-X86 code with WinCOFF specific logic.
I used cdb to confirm that this can show locals in parent CSRs in a few
cases, most importantly the one where we use ESI as a frame pointer,
i.e. the one in http://crbug.com/756153#c28
Once we have cdb integration in debuginfo-tests, we can add integration
tests there.
Reviewers: majnemer, hans
Subscribers: aemerson, mgorny, kristof.beyls, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D38776
llvm-svn: 315513
This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a
start. We should have pretty printers for different languages.
Recommit after being reverted in r315299.
Differential revision: https://reviews.llvm.org/D36993
llvm-svn: 315316
This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a
start. We should have pretty printers for different languages.
Differential revision: https://reviews.llvm.org/D36993
llvm-svn: 315297
This patch adds two new verifiers:
- It checks that the root DIE of a CU is actually a valid unit DIE.
(based on its tag)
- For DWARF5 which contains a unit type int he CU header, it checks that
this matches the type of the unit DIE.
Differential revision: https://reviews.llvm.org/D38453
llvm-svn: 315121
Summary:
When reinserting debug values after register allocation, make sure to
insert debug values after each redefinition of debug value register in
the slot index range. The reason for this is that DwarfDebug will end
the range of a debug variable when the physical reg is defined. For
instructions with e.g. tied operands this result in prematurely ended
debug range.
This resolves pr34545
Patch by Karl-Johan Karlsson and Bjorn Pettersson
Reviewers: rnk, aprantl
Reviewed By: rnk
Subscribers: bjope, llvm-commits
Differential Revision: https://reviews.llvm.org/D38229
llvm-svn: 314974
The list of register ids was previously written out in a couple of dirrent
places. This puts it in a .def file and also adds a few more registers (e.g.
the x87 regs) which should lead to more readable dumps, but I didn't include
the whole list since that seems unnecessary.
X86_MC::initLLVMToSEHAndCVRegMapping is pretty ugly, but at least it's not
relying on magic constants anymore. The TODO of using tablegen still stands.
Differential revision: https://reviews.llvm.org/D38480
llvm-svn: 314821
Summary:
This should fix a regression introduced by r313786, which switched from
MachineInstr::isIndirectDebugValue() to checking if operand 1 is an
immediate. I didn't have a test case for it until now.
A single UserValue, which approximates a user variable, may have many
DBG_VALUE instructions that disagree about whether the variable is in
memory or in a virtual register. This will become much more common once
we have llvm.dbg.addr, but you can construct such a test case manually
today with llvm.dbg.value.
Before this change, we would get two UserValues: one for direct and one
for indirect DBG_VALUE instructions describing the same variable. If we
build separate interval maps for direct and indirect locations, we will
end up accidentally coalescing identical DBG_VALUE intervals that need
to remain separate because they are broken up by intervals of the
opposite direct-ness.
Reviewers: aprantl
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37932
llvm-svn: 314819
Issues addressed since original review:
- Avoid bug in regalloc greedy/machine verifier when forwarding to use
in an instruction that re-defines the same virtual register.
- Fixed bug when forwarding to use in EarlyClobber instruction slot.
- Fixed incorrect forwarding to register definitions that showed up in
explicit_uses() iterator (e.g. in INLINEASM).
- Moved removal of dead instructions found by
LiveIntervals::shrinkToUses() outside of loop iterating over
instructions to avoid instructions being deleted while pointed to by
iterator.
- Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
- The pass no longer forwards COPYs to physical register uses, since
doing so can break code that implicitly relies on the physical
register number of the use.
- The pass no longer forwards COPYs to undef uses, since doing so
can break the machine verifier by creating LiveRanges that don't
end on a use (since the undef operand is not considered a use).
[MachineCopyPropagation] Extend pass to do COPY source forwarding
This change extends MachineCopyPropagation to do COPY source forwarding.
This change also extends the MachineCopyPropagation pass to be able to
be run during register allocation, after physical registers have been
assigned, but before the virtual registers have been re-written, which
allows it to remove virtual register COPY LiveIntervals that become dead
through the forwarding of all of their uses.
llvm-svn: 314729
This came out of a recent discussion on llvm-dev
(https://reviews.llvm.org/D38042). Currently the Verifier will strip
the debug info metadata from a module if it finds the dbeug info to be
malformed. This feature is very valuable since it allows us to improve
the Verifier by making it stricter without breaking bcompatibility,
but arguable the Verifier pass should not be modifying the IR. This
patch moves the stripping of broken debug info into AutoUpgrade
(UpgradeDebugInfo to be precise), which is a much better location for
this since the stripping of malformed (i.e., produced by older, buggy
versions of Clang) is a (harsh) form of AutoUpgrade.
This change is mostly NFC in nature, the one big difference is the
behavior when LLVM module passes are introducing malformed debug
info. Prior to this patch, a NoAsserts build would have printed a
warning and stripped the debug info, after this patch the Verifier
will report a fatal error. I believe this behavior is actually more
desirable anyway.
Differential Revision: https://reviews.llvm.org/D38184
llvm-svn: 314699
Summary:
A DBG_VALUE that is referring to a physical register is
valid up until the next def of the register, or the end
of the basic block that it belongs to.
LiveDebugVariables is computing live intervals (slot index
ranges) for DBG_VALUE instructions, before regalloc, in order
to be able to re-insert DBG_VALUE instructions again after
regalloc. When the DBG_VALUE is mapping a variable to a
physical register we do not need to compute the range. We
should simply re-insert the DBG_VALUE at the start position.
The problem that was found, resulting in this patch, was a
situation when the DBG_VALUE was the last real use of the
physical register. The computeIntervals/extendDef methods
extended the range to cover the whole basic block, even though
the physical register very well could be allocated to some
virtual register inside the basic block. So the extended
range could not be trusted.
This patch is a preparation for https://reviews.llvm.org/D38229,
where the goal is to insert DBG_VALUE after each new definition
of a variable, even if the virtual registers that the variable
was connected to has been coalesced into using the same physical
register (e.g. due to two address instructions). For more info
see https://bugs.llvm.org/show_bug.cgi?id=34545
Reviewers: aprantl, rnk, echristo
Reviewed By: aprantl
Subscribers: Ka-Ka, llvm-commits
Differential Revision: https://reviews.llvm.org/D38140
llvm-svn: 314414
Summary:
This code iterates the 'Orders' vector in parallel with the DbgValue
list, emitting all DBG_VALUEs that occurred between the last IR order
insertion point and the next insertion point. This assumes the
SDDbgValue list is sorted in IR order, which it usually is. However, it
is not sorted when a node with a debug value is replaced with another
one. When this happens, TransferDbgValues is called, and the new value
is added to the end of the list.
The problem can be solved by stably sorting the list by IR order.
Reviewers: aprantl, Ka-Ka
Reviewed By: aprantl
Subscribers: MatzeB, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D38197
llvm-svn: 314114
The code wasn't yelling at the user when there's a reference
from a DIGlobalVariableExpression. Thanks to Adrian for the
reduced testcase. Fixes PR34672.
llvm-svn: 314069
This patch adds dumping of line table instructions as well as the final
state at each specified pc value in verbose mode. This is essentially
the same as the default in Darwin's dwarfdump. Dumping the actual line
table opcodes can be particularly useful for something like debugging a
bad `.debug_line` section.
Differential revision: https://reviews.llvm.org/D37971
llvm-svn: 313910
The fix is to avoid invalidating our insertion point in
replaceDbgDeclare:
Builder.insertDeclare(NewAddress, DIVar, DIExpr, Loc, InsertBefore);
+ if (DII == InsertBefore)
+ InsertBefore = &*std::next(InsertBefore->getIterator());
DII->eraseFromParent();
I had to write a unit tests for this instead of a lit test because the
use list order matters in order to trigger the bug.
The reduced C test case for this was:
void useit(int*);
static inline void inlineme() {
int x[2];
useit(x);
}
void f() {
inlineme();
inlineme();
}
llvm-svn: 313905
.. as well as the two subsequent changes r313826 and r313875.
This leads to segfaults in combination with ASAN. Will forward repro
instructions to the original author (rnk).
llvm-svn: 313876
Summary:
There already was code that tried to remove the dbg.declare, but that code
was placed after we had called
I->replaceAllUsesWith(UndefValue::get(I->getType()));
on the alloca, so when we searched for the relevant dbg.declare, we
couldn't find it.
Now we do the search before we call RAUW so there is a chance to find it.
An existing testcase needed update due to this. Two dbg.declare with undef
were removed and then suddenly one of the two CHECKS failed.
Before this patch we got
call void @llvm.dbg.declare(metadata i24* undef, metadata !14, metadata !DIExpression(DW_OP_LLVM_fragment, 32, 24)), !dbg !15
call void @llvm.dbg.declare(metadata %struct.prog_src_register* undef, metadata !14, metadata !DIExpression()), !dbg !15
call void @llvm.dbg.value(metadata i32 0, metadata !14, metadata !DIExpression(DW_OP_LLVM_fragment, 0, 32)), !dbg !15
call void @llvm.dbg.value(metadata i32 0, metadata !14, metadata !DIExpression(DW_OP_LLVM_fragment, 32, 24)), !dbg !15
and with it we get
call void @llvm.dbg.value(metadata i32 0, metadata !14, metadata !DIExpression(DW_OP_LLVM_fragment, 0, 32)), !dbg !15
call void @llvm.dbg.value(metadata i32 0, metadata !14, metadata !DIExpression(DW_OP_LLVM_fragment, 32, 24)), !dbg !15
However, the CHECKs in the testcase checked things in a silly order, so
they only passed since they found things in the first dbg.declare. Now
we changed the order of the checks and the test passes.
Reviewers: rnk
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37900
llvm-svn: 313875
Summary:
This implements the design discussed on llvm-dev for better tracking of
variables that live in memory through optimizations:
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117222.html
This is tracked as PR34136
llvm.dbg.addr is intended to be produced and used in almost precisely
the same way as llvm.dbg.declare is today, with the exception that it is
control-dependent. That means that dbg.addr should always have a
position in the instruction stream, and it will allow passes that
optimize memory operations on local variables to insert llvm.dbg.value
calls to reflect deleted stores. See SourceLevelDebugging.rst for more
details.
The main drawback to generating DBG_VALUE machine instrs is that they
usually cause LLVM to emit a location list for DW_AT_location. The next
step will be to teach DwarfDebug.cpp how to recognize more DBG_VALUE
ranges as not needing a location list, and possibly start setting
DW_AT_start_offset for variables whose lifetimes begin mid-scope.
Reviewers: aprantl, dblaikie, probinson
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37768
llvm-svn: 313825
After r313775, it's easier to maintain a parallel BitVector of spilled
locations indexed by location number.
I wasn't able to build a good reduced test case for this iteration of
the bug, but I added a more direct assertion that spilled values must
use frame index locations. If this bug reappears, it won't only fire on
the NEON vector code that we detected it on, but on medium-sized
integer-only programs as well.
llvm-svn: 313786
Remove unneeded attributes from test/DebugInfo/Generic/imported-name-inlined.ll because it was causing failures on pure MIPS builds.
Patch by Miloš Stojanović!
Differential Revision: https://reviews.llvm.org/D38079
llvm-svn: 313762
This reverts r313640, originally r313400, one more time for essentially
the same issue. My BitVector of spilled location numbers isn't working
because we coalesce identical DBG_VALUE locations as we rewrite them,
invalidating the location numbers used to index the BitVector.
llvm-svn: 313679
I forgot to zero out the BitVector when reusing it between UserValues.
Later uses of the same location number for a different UserValue would
falsely indicate that they were spilled. Usually this would lead to
incorrect debug info, but in some cases they would indicate something
nonsensical like a memory location based on a vector register (Q8 on
ARM).
llvm-svn: 313640
This caused asserts in Chromium. See http://crbug.com/766261
> Summary:
> This comes up in optimized debug info for C++ programs that pass and
> return objects indirectly by address. In these programs,
> llvm.dbg.declare survives optimization, which causes us to emit indirect
> DBG_VALUE instructions. The fast register allocator knows to insert
> DW_OP_deref when spilling indirect DBG_VALUE instructions, but the
> LiveDebugVariables did not until this change.
>
> This fixes part of PR34513. I need to look into why this doesn't work at
> -O0 and I'll send follow up patches to handle that.
>
> Reviewers: aprantl, dblaikie, probinson
>
> Subscribers: qcolombet, hiraditya, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D37911
llvm-svn: 313589
This patch makes the `.eh_frame` extension an alias for `.debug_frame`.
Up till now it was only possible to dump the section using objdump, but
not with dwarfdump. Since the two are essentially interchangeable, we
dump whichever of the two is present.
As a workaround, this patch also adds parsing for 3 currently
unimplemented CFA instructions: `DW_CFA_def_cfa_expression`,
`DW_CFA_expression`, and `DW_CFA_val_expression`. Because I lack the
required knowledge, I just parse the fields without actually creating
the instructions.
Finally, this also fixes the typo in the `.debug_frame` section name
which incorrectly contained a trailing `s`.
Differential revision: https://reviews.llvm.org/D37852
llvm-svn: 313530
This reverts commit 6389e7aa724ea7671d096f4770f016c3d86b0d54.
There is a bug in this implementation where the string value of the
checksum is outputted, instead of the actual hex bytes. Therefore the
checksum is incorrect, and this prevent pdbs from being loaded by visual
studio. Revert this until the checksum is emitted correctly.
llvm-svn: 313431
Summary:
This comes up in optimized debug info for C++ programs that pass and
return objects indirectly by address. In these programs,
llvm.dbg.declare survives optimization, which causes us to emit indirect
DBG_VALUE instructions. The fast register allocator knows to insert
DW_OP_deref when spilling indirect DBG_VALUE instructions, but the
LiveDebugVariables did not until this change.
This fixes part of PR34513. I need to look into why this doesn't work at
-O0 and I'll send follow up patches to handle that.
Reviewers: aprantl, dblaikie, probinson
Subscribers: qcolombet, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37911
llvm-svn: 313400
Summary:
Fixes PR34513.
Indirect DBG_VALUEs typically come from dbg.declares of non-trivially
copyable C++ objects that must be passed by address. We were already
handling the case where the virtual register gets allocated to a
physical register and is later spilled. That's what usually happens for
normal parameters that aren't NRVO variables: they usually appear in
physical register parameters, and are spilled later in the function,
which would correctly add deref.
NRVO variables are different because the dbg.declare can come much later
after earlier instructions cause the incoming virtual register to be
spilled.
Also, clean up this code. We only need to look at the first operand of a
DBG_VALUE, which eliminates the operand loop.
Reviewers: aprantl, dblaikie, probinson
Subscribers: MatzeB, qcolombet, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37929
llvm-svn: 313399
Summary:
The checksums had already been placed in the IR, this patch allows
MCCodeView to actually write it out to an MCStreamer.
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37157
llvm-svn: 313374
This breaks bootstrap builds, and is actually unnecessary. Tested
locally and it seems we can remove -debug-comile just fine.
Follow-up to D37791.
llvm-svn: 313238
Summary:
XRay had been assuming that the previous section is the "text" section
of the function when lowering the instrumentation map. Unfortunately
this is not a safe assumption, because we may be coming from lowering
debug type information for the function being lowered.
This fixes an issue with combining -gsplit-dwarf, -generate-type-units,
-debug-compile and -fxray-instrument for sole member functions. When the
split dwarf section is stripped, we're left with references from the
xray_instr_map to the debug section. The change now uses the function's
symbol instead of the previous section's start symbol.
We found the bug while attempting to strip the split debug sections off
an XRay-instrumented object file, which had a peculiar edge-case for
single-function classes where the single function is being lowered.
Because XRay had assocaited the instrumentation map for a function to
the debug types section instead of the function's section, the objcopy
call will fail due to the misplaced reference from the xray_instr_map
section.
Reviewers: pcc, dblaikie, echristo
Subscribers: llvm-commits, aprantl
Differential Revision: https://reviews.llvm.org/D37791
llvm-svn: 313233
Since users typically don't really care about the .dwo / non.dwo
distinction, this patch makes it so dwarfdump --debug-<info,...> dumps
.debug_info and (if available) also .debug_info.dwo. This simplifies
the command line interface (I've removed all dwo-specific dump
options) and makes the tool friendlier to use.
Differential Revision: https://reviews.llvm.org/D37771
llvm-svn: 313207
Previously we used a size of '1' for VLAs because we weren't sure what
MSVC did. However, MSVC does support declaring an array without a size,
for which it emits an array type with a size of zero. Clang emits the
same DI metadata for VLAs and arrays without bound, so we would describe
arrays without bound as having one element. This lead to Microsoft
debuggers only printing a single element.
Emitting a size of zero appears to cause these debuggers to search the
symbol information to find a definition of the variable with accurate
array bounds.
Fixes http://crbug.com/763580
llvm-svn: 313203
Summary:
To improve CodeView quality for static member functions, we need to make the
static explicit. In addition to a small change in LLVM's CodeViewDebug to
return the appropriate MethodKind, this requires a small change in Clang to
note the staticness in the debug info metadata.
Subscribers: aprantl, hiraditya
Differential Revision: https://reviews.llvm.org/D37715
llvm-svn: 313192
This flag is unnecessary for testing because we can get the coverage
we need by adjusting CU attributes.
Differential Revision: https://reviews.llvm.org/D37725
llvm-svn: 313079
A prologue-end line record is emitted with an incorrect associated address,
which causes a debugger to show the beginning of function body to be inside
the prologue.
Patch written by Carlos Alberto Enciso.
Differential Revision: https://reviews.llvm.org/D37625
llvm-svn: 313047
As discussed on llvm-dev in
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117301.html
this changes the command line interface of llvm-dwarfdump to match the
one used by the dwarfdump utility shipping on macOS. In addition to
being shorter to type this format also has the advantage of allowing
more than one section to be specified at the same time.
In a nutshell, with this change
$ llvm-dwarfdump --debug-dump=info
$ llvm-dwarfdump --debug-dump=apple-objc
becomes
$ dwarfdump --debug-info --apple-objc
Differential Revision: https://reviews.llvm.org/D37714
llvm-svn: 312970
S_UDT records are basically the "bridge" between the debugger's
expression evaluator and the type information. If you type
(Foo*)nullptr into the watch window, the debugger looks for an
S_UDT record named Foo. If it can find one, it displays your type.
Otherwise you get an error.
We have always understood this to mean that if you have code like
this:
struct A {
int X;
};
struct B {
typedef A AT;
AT Member;
};
that you will get 3 S_UDT records. "A", "B", and "B::AT". Because
if you were to type (B::AT*)nullptr into the debugger, it would
need to find an S_UDT record named "B::AT".
But "B::AT" is actually the S_UDT record that would be generated
if B were a namespace, not a struct. So the debugger needs to be
able to distinguish this case. So what it does is:
1. Look for an S_UDT named "B::AT". If it finds one, it knows
that AT is in a namespace.
2. If it doesn't find one, split at the scope resolution operator,
and look for an S_UDT named B. If it finds one, look up the type
for B, and then look for AT as one of its members.
With this algorithm, S_UDT records for nested typedefs are not just
unnecessary, but actually wrong!
The results of implementing this in clang are dramatic. It cuts
our /DEBUG:FASTLINK PDB sizes by more than 50%, and we go from
being ~20% larger than MSVC PDBs on average, to ~40% smaller.
It also slightly speeds up link time. We get about 10% faster
links than without this patch.
Differential Revision: https://reviews.llvm.org/D37410
llvm-svn: 312583
It solves issue of wrong section index evaluating for ranges when
base address is used.
Based on David Blaikie's patch D36097.
Differential revision: https://reviews.llvm.org/D37214
llvm-svn: 312477
Debug information can be, and was, corrupted when the runtime
remainder loop was fully unrolled. This is because a !null node can
be created instead of a unique one describing the loop. In this case,
the original node gets incorrectly updated with the NewLoopID
metadata.
In the case when the remainder loop is going to be quickly fully
unrolled, there isn't the need to add loop metadata for it anyway.
Differential Revision: https://reviews.llvm.org/D37338
llvm-svn: 312471
We have llvm-readobj for dumping CodeView from object files, and
llvm-pdbutil has always been more focused on PDB. However,
llvm-pdbutil has a lot of useful options for summarizing debug
information in aggregate and presenting high level statistical
views. Furthermore, it's arguably better as a testing tool since
we don't have to write tests to conform to a state-machine like
structure where you match multiple lines in succession, each
depending on a previous match. llvm-pdbutil dumps much more
concisely, so it's possible to use single-line matches in many
cases where as with readobj tests you have to use multi-line
matches with an implicit state machine.
Because of this, I'm adding object file support to llvm-pdbutil.
In fact, this mirrors the cvdump tool from Microsoft, which also
supports both object files and pdb files. In the future we could
perhaps rename this tool llvm-cvutil.
In the meantime, this allows us to deep dive into object files
the same way we already can with PDB files.
llvm-svn: 312358
Issues addressed since original review:
- Moved removal of dead instructions found by
LiveIntervals::shrinkToUses() outside of loop iterating over
instructions to avoid instructions being deleted while pointed to by
iterator.
- Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
- The pass no longer forwards COPYs to physical register uses, since
doing so can break code that implicitly relies on the physical
register number of the use.
- The pass no longer forwards COPYs to undef uses, since doing so
can break the machine verifier by creating LiveRanges that don't
end on a use (since the undef operand is not considered a use).
[MachineCopyPropagation] Extend pass to do COPY source forwarding
This change extends MachineCopyPropagation to do COPY source forwarding.
This change also extends the MachineCopyPropagation pass to be able to
be run during register allocation, after physical registers have been
assigned, but before the virtual registers have been re-written, which
allows it to remove virtual register COPY LiveIntervals that become dead
through the forwarding of all of their uses.
llvm-svn: 312328
This adds a new command line option, -udt-stats, which breaks
down the stats of S_UDT records. These are one of the biggest
contributors to the size of /DEBUG:FASTLINK PDBs, so they need
some additional tools to be able to analyze their usage. This
option will dig into each S_UDT record and determine what kind
of record it points to, and then break down the statistics by
the target type. The goal here is to identify how our object
files differ from MSVC object files in S_UDT records, so that
we can output fewer of them and reach size parity.
llvm-svn: 312276
It caused PR34387: Assertion failed: (RegNo < NumRegs && "Attempting to access record for invalid register number!")
> Issues identified by buildbots addressed since original review:
> - Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
> - The pass no longer forwards COPYs to physical register uses, since
> doing so can break code that implicitly relies on the physical
> register number of the use.
> - The pass no longer forwards COPYs to undef uses, since doing so
> can break the machine verifier by creating LiveRanges that don't
> end on a use (since the undef operand is not considered a use).
>
> [MachineCopyPropagation] Extend pass to do COPY source forwarding
>
> This change extends MachineCopyPropagation to do COPY source forwarding.
>
> This change also extends the MachineCopyPropagation pass to be able to
> be run during register allocation, after physical registers have been
> assigned, but before the virtual registers have been re-written, which
> allows it to remove virtual register COPY LiveIntervals that become dead
> through the forwarding of all of their uses.
llvm-svn: 312178
Previously we would just describe the first register and then call it
quits. This patch emits fragment expressions for each register.
<rdar://problem/34075307>
llvm-svn: 312169
Issues identified by buildbots addressed since original review:
- Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
- The pass no longer forwards COPYs to physical register uses, since
doing so can break code that implicitly relies on the physical
register number of the use.
- The pass no longer forwards COPYs to undef uses, since doing so
can break the machine verifier by creating LiveRanges that don't
end on a use (since the undef operand is not considered a use).
[MachineCopyPropagation] Extend pass to do COPY source forwarding
This change extends MachineCopyPropagation to do COPY source forwarding.
This change also extends the MachineCopyPropagation pass to be able to
be run during register allocation, after physical registers have been
assigned, but before the virtual registers have been re-written, which
allows it to remove virtual register COPY LiveIntervals that become dead
through the forwarding of all of their uses.
llvm-svn: 312154
This change simplifies code that has to deal with
DIGlobalVariableExpression and mirrors how we treat DIExpressions in
debug info intrinsics. Before this change there were two ways of
representing empty expressions on globals, a nullptr and an empty
!DIExpression().
If someone needs to upgrade out-of-tree testcases:
perl -pi -e 's/(!DIGlobalVariableExpression\(var: ![0-9]*)\)/\1, expr: !DIExpression())/g' <MYTEST.ll>
will catch 95%.
llvm-svn: 312144
Alexander Potapenko