Also it extracts getCopyFromRegs helper function in SelectionDAGBuilder as we need to be able to customize type of the register exported from basic block during lowering of the gc.result.
(Resubmitting this change after not being able to reproduce buildbot failure)
Differential Revision: http://reviews.llvm.org/D7760
llvm-svn: 231800
When tail merging it may be necessary to remove MMOs from memory operations to
ensures later passes (e.g., MI sched) conservatively compute dependencies.
Currently, we only remove the MMO from the common tail if the MMO doesn't match
with the relative instruction in the non-common tail(s).
A more robust solution would be to add multiple MMOs from the duplicate MIs to
the new MI. Currently ScheduleDAGInstrs.cpp ignores all MMOs on instructions
with multiple MMOs, so this solution is equivalent for the time being.
No test case included as this is incredibly difficult to reproduce.
Patch was a collaborative effort between Ana Pazos and myself.
Phabricator: http://reviews.llvm.org/D7769
llvm-svn: 231799
We want to replace as much custom x86 shuffling via intrinsics
as possible because pushing the code down the generic shuffle
optimization path allows for better codegen and less complexity
in LLVM.
This is the sibling patch for the Clang half of this change:
http://reviews.llvm.org/D8088
Differential Revision: http://reviews.llvm.org/D8086
llvm-svn: 231794
This crash occurs due to memory corruption when trying to update dependency
direction based on Constraints.
This crash was observed during lnt regression of Polybench benchmark test case dynprog.
Review: http://reviews.llvm.org/D8059
llvm-svn: 231788
This crash in Dependency analysis is because we assume here that in case of UsefulGEP
both source and destination have the same number of operands which may not be true.
This incorrect assumption results in crash while populating Pairs. Fix the same.
This crash was observed during lnt regression for code such as-
struct s{
int A[10][10];
int C[10][10][10];
} S;
void dep_constraint_crash_test(int k,int N) {
for( int i=0;i<N;i++)
for( int j=0;j<N;j++)
S.A[0][0] = S.C[0][0][k];
}
Review: http://reviews.llvm.org/D8162
llvm-svn: 231784
Summary:
This is part of the work to support memory constraints that behave
differently to 'm'. The subsequent patches will expand on the existing
encoding (which is a 32-bit int) and as a result in some flag words will no
longer fit into an i16. This problem only affected the MSP430 target which
appears to have 16-bit pointers.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, llvm-commits
Differential Revision: http://reviews.llvm.org/D8168
llvm-svn: 231783
We failed to use a marking set to properly handle recursive types, which caused use
to recurse infinitely and eventually overflow the stack.
llvm-svn: 231760
In this situation we would always have already flagged an error on the statepoint intrinsic,
but then we carry on to parse other, related GC intrinsics, and could end up crashing during that
verification when they try to access data from the malformed statepoint.
llvm-svn: 231759
ReplaceInstUsesWith needs to return nullptr when the input has no users,
because in that case it does not mutate the program. Otherwise, we can
get stuck in an infinite loop of repeatedly attempting to constant fold
and instruction with no users.
llvm-svn: 231755
When referring to a symbol in a dwarf section on ELF we should use
.long foo
instead of
.long foo - .debug_something
because ELF is unaware of the content of the sections and therefore needs
relocations. This has nothing to do with optimizing a -0.
llvm-svn: 231751
They mark the start of a compile unit, so name them .Lcu_*. Using
Section->getLabelBeginName() makes it looks like they mark the start of the
section.
While at it, switch to createTempSymbol to avoid collisions with labels
created in inline assembly. Not sure if a "don't crash" test is worth it.
With this getLabelBeginName is dead, delete it.
llvm-svn: 231750
Last commit fixed the handling of hash collisions, but it introdcuced
unneeded bucket terminators in some places. The generated table was
correct, it can just be a tiny bit smaller. As the previous table was
correct, the test doesn't need updating. If we really wanted to test
this, I could add the section size to the dwarf dump and test for a
precise value there. IMO the correctness test is sufficient.
llvm-svn: 231748
CFLAA didn't know how to properly handle ConstantExprs; it would silently
ignore them. This was a problem if the ConstantExpr is, say, a GEP of a global,
because CFLAA wouldn't realize that there's a global there. :)
llvm-svn: 231743
We now treat pointers given to ptrtoint and pointers retrieved from
inttoptr as similar to arguments or globals (can alias anything, etc.)
This solves some of the problems we were having with giving incorrect
results.
llvm-svn: 231741
Summary:
Now that the DataLayout is a mandatory part of the module, let's start
cleaning the codebase. This patch is a first attempt at doing that.
This patch is not exactly NFC as for instance some places were passing
a nullptr instead of the DataLayout, possibly just because there was a
default value on the DataLayout argument to many functions in the API.
Even though it is not purely NFC, there is no change in the
validation.
I turned as many pointer to DataLayout to references, this helped
figuring out all the places where a nullptr could come up.
I had initially a local version of this patch broken into over 30
independant, commits but some later commit were cleaning the API and
touching part of the code modified in the previous commits, so it
seemed cleaner without the intermediate state.
Test Plan:
Reviewers: echristo
Subscribers: llvm-commits
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 231740
It turns out accelerator tables where totally broken if they contained
entries with colliding hashes. The failure mode is pretty bad, as it not
only impacted the colliding entries, but would basically make all the
entries after the first hash collision pointing in the wrong place.
The testcase uses the symbol names that where found to collide during a
clang build.
From a performance point of view, the patch adds a sort and a linear
walk over each bucket contents. While it has a measurable impact on the
accelerator table emission, it's not showing up significantly in clang
profiles (and I'd argue that correctness is priceless :-)).
llvm-svn: 231732
Author: Lang Hames <lhames@gmail.com>
Date: Mon Mar 9 23:51:09 2015 +0000
[Orc][MCJIT][RuntimeDyld] Add header that was accidentally left out of r231724.
Author: Lang Hames <lhames@gmail.com>
Date: Mon Mar 9 23:44:13 2015 +0000
[Orc][MCJIT][RuntimeDyld] Add symbol flags to symbols in RuntimeDyld. Thread the
new types through MCJIT and Orc.
In particular, add a 'weak' flag. When plumbed through RTDyldMemoryManager, this
will allow us to distinguish between weak and strong definitions and find the
right ones during symbol resolution.
llvm-svn: 231731
new types through MCJIT and Orc.
In particular, add a 'weak' flag. When plumbed through RTDyldMemoryManager, this
will allow us to distinguish between weak and strong definitions and find the
right ones during symbol resolution.
llvm-svn: 231724
This fixes a subtle issue that was introduced in r205153.
When reusing a store for the extractelement expansion (to load directly
from it, inserting of going through the stack), later stores to the
same location might have overwritten the data we were expecting to
extract from.
To fix that, we need to explicitly replace the chain going out of the
reused store, so that later stores also have an explicit dependency on
the generated element-extracting loads, and can't clobber them.
rdar://20066785
Differential Revision: http://reviews.llvm.org/D8180
llvm-svn: 231721
Fix the double-deletion of AnalysisResolver when delegating through to
Dwarf EH preparation by creating one from scratch. Hopefully the new
pass manager simplifies this.
This reverts commit r229952.
llvm-svn: 231719
Summary:
This removes some duplicated code, and also helps optimization: e.g. in
the test case added, `%idx ULT 128` in `@x` is not currently optimized
to `true` by `-indvars` but will be, after this change.
The only functional change in ths commit is that for add recurrences,
ScalarEvolution::getRange will be more aggressive -- computing the
unsigned (resp. signed) range for a SCEVAddRecExpr will now look at the
NSW (resp. NUW) bits and check for signed (resp. unsigned) overflow.
This can be a strict improvement in some cases (such as the attached
test case), and should be no worse in other cases.
Reviewers: atrick, nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8142
llvm-svn: 231709
Summary:
Unused in this commit, but will be used in a subsequent change (D8142)
by a FileCheck test.
Reviewers: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8143
llvm-svn: 231708
I have a test for that issue, but I didn't include it in the commit as it's
a 200KB file for a pretty minor issue. (The reason the file is so big is
that it needs > 1024 variables/functions to trigger and that with debug
information.
The issue/fix on the other side is totally trivial. If poeple want the test
commited, I can do that. It just didn't seem worth it to me.
llvm-svn: 231701
clang-cl would warn that this value is not representable in 'int':
enum { FeatureX = 1ULL << 31 };
All MS enums are 'ints' unless otherwise specified, so we have to use an
explicit type. The AMDGPU target just hit 32 features, triggering this
warning.
Now that we have C++11 strong enum types, we can also eliminate the
'const uint64_t' codepath from tablegen and just use 'enum : uint64_t'.
llvm-svn: 231697
CloudABI is a POSIX-like runtime environment built around the concept of
capability-based security. More details:
https://github.com/NuxiNL/cloudlibc
CloudABI uses its own ELFOSABI number. This number has been allocated by
the maintainers of ELF a couple of days ago.
Reviewed by: echristo
llvm-svn: 231681
In the case where just tables are part of the function section, this produces
more readable assembly by avoiding switching to the eh section and back
to .text.
This would also break with non unique section names, as trying to switch to
a unique section actually creates a new one.
llvm-svn: 231677
Summary:
Code is mostly copied from AArch64 port and modified where needed for Mips.
This handles the "non" legal cases of logical ops. Legal cases are handled by tablegen patterns.
Test Plan:
Make check test logopm.ll
All of test-suite passes at O0/O2 and mips32 r1/r2 with this new change.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: echristo, llvm-commits, aemerson, rfuhler
Differential Revision: http://reviews.llvm.org/D6599
llvm-svn: 231665
Fixing this also exposed a related issue where the landingpad under construction was not
cleaned up when an error was raised, which would cause bad reference errors before the
error could actually be printed.
llvm-svn: 231634
For inner one of nested loops, it is more likely to be a hot loop,
and the runtime check can be promoted out from patch 0001, so the
overhead is less, we can try a doubled threshold to unroll more loops.
llvm-svn: 231632
Runtime unrolling is an expensive optimization which can bring benefit
only if the loop is hot and iteration number is relatively large enough.
For some loops, we know they are not worth to be runtime unrolled.
The scalar loop from vectorization is one of the cases.
llvm-svn: 231631
Runtime unrollng will introduce a runtime check in loop prologue.
If the unrolled loop is a inner loop, then the proglogue will be inside
the outer loop. LICM pass can help to promote the runtime check out if
the checked value is loop invariant.
llvm-svn: 231630
Summary:
See the two test cases.
; Can fold fcmp with undef on one side by choosing NaN for the undef
; Can fold fcmp with undef on both side
; fcmp u_pred undef, undef -> true
; fcmp o_pred undef, undef -> false
; because whatever you choose for the first undef
; you can choose NaN for the other undef
Reviewers: hfinkel, chandlerc, majnemer
Reviewed By: majnemer
Subscribers: majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D7617
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 231626
There were cases where the backend computed a wrong permute mask for a VPERM2X128 node.
Example:
\code
define <8 x float> @foo(<8 x float> %a, <8 x float> %b) {
%shuffle = shufflevector <8 x float> %a, <8 x float> %b, <8 x i32> <i32 undef, i32 undef, i32 6, i32 7, i32 undef, i32 undef, i32 6, i32 7>
ret <8 x float> %shuffle
}
\code end
Before this patch, llc (with -mattr=+avx) emitted the following vperm2f128:
vperm2f128 $0, %ymm0, %ymm0, %ymm0 # ymm0 = ymm0[0,1,0,1]
With this patch, llc emits a vperm2f128 with a correct permute mask:
vperm2f128 $17, %ymm0, %ymm0, %ymm0 # ymm0 = ymm0[2,3,2,3]
Differential Revision: http://reviews.llvm.org/D8119
llvm-svn: 231601
We have an increasing number of cases where we are creating commuted shuffle masks - all implementing nearly the same code.
This patch adds a static helper function - ShuffleVectorSDNode::commuteMask() and replaces a number of cases to use it.
Differential Revision: http://reviews.llvm.org/D8139
llvm-svn: 231581
lib/ExecutionEngine/Targets has no Makefile, causing the autoconf build
to fail. Solve this by bringing the COFF implementation of RuntimeDyld
in line like the Mach-O and ELF implementations.
llvm-svn: 231579
Provide basic support for dynamically loadable coff objects. Only handles a subset of x64 currently.
Patch by Andy Ayers!
Differential Revision: http://reviews.llvm.org/D7793
llvm-svn: 231574
In theory this allows the compiler to skip materializing the array on
the stack. In practice clang often fails to do that, but that's a
different story. NFC.
llvm-svn: 231571
This patch fixes the logic in the DAGCombiner that folds an AND node according
to rule: (and (X (load V)), C) -> (X (load V))
An AND between a vector load 'X' and a constant build_vector 'C' can be folded
into the load itself only if we can prove that the AND operation is redundant.
The algorithm implemented by 'visitAND' firstly computes the splat value 'S'
from C, and then checks if S has the lower 'B' bits set (where B is the size in
bits of the vector element type). The algorithm takes into account also the
'undef' bits in the splat mask.
Unfortunately, the algorithm only worked under the assumption that the size of S
is a multiple of the vector element type. With this patch, we conservatively
avoid folding the AND if the splat bits are not compatible with the vector
element type.
Added X86 test and-load-fold.ll
Differential Revision: http://reviews.llvm.org/D8085
llvm-svn: 231563
libc++. This lets me almost self-host on Linux with libc++ and libc++abi
very simply.
Currently, MCJIT and OrcJIT are failing due to uncaught exceptions, and
the Go binding tests are failing to build due to not linking in the
correct C++ standard library.
llvm-svn: 231560
This will provide the analogous replacements for the PassManagerBuilder
and other code long term. This code is extracted from the opt tool
currently, and I plan to extend it as I build up support for using the
new pass manager in Clang and other places.
Mailing this out for review in part to let folks comment on the terrible names
here. A brief word about why I chose the names I did.
The library is called "Passes" to try and make it clear that it is a high-level
utility and where *all* of the passes come together and are registered in
a common library. I didn't want it to be *limited* to a registry though, the
registry is just one component.
The class is a "PassBuilder" but this name I'm less happy with. It doesn't
build passes in any traditional sense and isn't a Builder-style API at all. The
class is a PassRegisterer or PassAdder, but neither of those really make a lot
of sense. This class is responsible for constructing passes for registry in an
analysis manager or for population of a pass pipeline. If anyone has a better
name, I would love to hear it. The other candidate I looked at was
PassRegistrar, but that doesn't really fit either. There is no register of all
the passes in use, and so I think continuing the "registry" analog outside of
the registry of pass *names* and *types* is a mistake. The objects themselves
are just objects with the new pass manager.
Differential Revision: http://reviews.llvm.org/D8054
llvm-svn: 231556
This patch attempts to convert a SCALAR_TO_VECTOR using an operand from an EXTRACT_VECTOR_ELT into a VECTOR_SHUFFLE.
This prevents many cases of spilling scalar data between the gpr + simd registers.
At present the optimization only accepts cases where there is no TRUNC of the scalar type (i.e. all types must match).
Differential Revision: http://reviews.llvm.org/D8132
llvm-svn: 231554
Doing this gets function's low_pc and global variable's locations right
in the output debug info. It also could get right other attributes
that need to be relocated (in linker terms), but I don't know of any
other than the address attributes.
This doesn't fixup low_pc attributes in compile_unit, lexical_block
or inlined subroutine, nor does it get right high_pc attributes
for function. This will come in a subsequent commit.
llvm-svn: 231544
to disable lane switching if we don't actually have the instruction
set we want to switch to. Models the earlier check above the
conditional for the pass.
The testcase is one that triggered with the assert that's added
as part of the fix, use it to avoid adding a new testcase as it
highlights the same problem.
llvm-svn: 231539
Reference attributes are mainly handled by just creating DIEEntry
attributes for them. There is a special case for DW_FORM_ref_addr
attributes though, because the DIEEntry code needs a DwarfDebug
code to emit them (and we don't have one as we do no CodeGen).
In that case, just use DIEInteger attributes with the right form.
llvm-svn: 231531
The start offset of a linked unit is known before starting to clone
its DIEs. Handling DW_FORM_ref_addr attributes requires that this
offset is set while cloning the unit. Split CompileUnit::computeOffsets()
into setStartOffset() and computeNextUnitOffset() and call them
repsectively before cloning the DIEs and right after.
llvm-svn: 231530
Teach the load store optimizer how to sign extend a result of a load pair when
it helps creating more pairs.
The rational is that loads are more expensive than sign extensions, so if we
gather some in one instruction this is better!
<rdar://problem/20072968>
llvm-svn: 231527
This is based on the following equivalences:
select(C0 & C1, X, Y) <=> select(C0, select(C1, X, Y), Y)
select(C0 | C1, X, Y) <=> select(C0, X, select(C1, X, Y))
Many target cannot perform and/or on the CPU flags and therefore the
right side should be choosen to avoid materializign the i1 flags in an
integer register. If the target can perform this operation efficiently
we normalize to the left form.
Differential Revision: http://reviews.llvm.org/D7622
llvm-svn: 231507
This is in preparation for changing visitSELECT to normalize towards
select(Cond0, select(Cond1, X, Y), Y);
select(Cond0, X, select(Cond1, X, Y)) which perfom an implicit and/or of
the conditions.
The factored function contains all DAGCombine rules which reduce two values
combined by an And/Or operation to a single value. This does not include rules
involving constants as visitSELECT already handles that case.
Differential Revision: http://reviews.llvm.org/D8026
llvm-svn: 231506
The checking for extgotequiv and localgotequiv rely on the emission
order, which is not guaranteed because we use DenseMap to hold the GOT
equivalents. XFAIL this now until I get time to use MapVector and test
out the solution. In the meantime, appease buildbots.
llvm-svn: 231497
-debug-pass is not specified, as the string is only used when dumping pass
information. There is a big cost of determining the name in
ReginBase<Tr>:getNameStr() if the region's entry or exit block doesn't have a
name. This is the case for the Release build, as names are not preserved by the
front-end.
RegionPass is mainly used by Polly, resulting in long compile time for one file
of a customer application with the Release build (1m24s) vs Release+Asserts
build (10s) when Polly is used. With this change, the compile time with the
Release build went down to 8s.
Patch by Sanjin Sijaric <ssijaric@codeaurora.org>!
Phabricator: http://reviews.llvm.org/D8076
llvm-svn: 231485
Multiplication is not dependent on signedness, so just treating
all input ranges as unsigned is not incorrect. However it will cause
overly pessimistic ranges (such as full-set) when used with signed
negative values.
Teach multiply to try to interpret its inputs as both signed and
unsigned, and then to take the most specific (smallest population)
as its result.
llvm-svn: 231483
Add MachO 32-bit (i.e. arm and x86) support for replacing global GOT equivalent
symbol accesses. Unlike 64-bit targets, there's no GOTPCREL relocation, and
access through a non_lazy_symbol_pointers section is used instead.
-- before
_extgotequiv:
.long _extfoo
_delta:
.long _extgotequiv-_delta
-- after
_delta:
.long L_extfoo$non_lazy_ptr-_delta
.section __IMPORT,__pointers,non_lazy_symbol_pointers
L_extfoo$non_lazy_ptr:
.indirect_symbol _extfoo
.long 0
llvm-svn: 231475
Follow up r230264 and add ARM64 support for replacing global GOT
equivalent symbol accesses by references to the GOT entry for the final
symbol instead, example:
-- before
.globl _foo
_foo:
.long 42
.globl _gotequivalent
_gotequivalent:
.quad _foo
.globl _delta
_delta:
.long _gotequivalent-_delta
-- after
.globl _foo
_foo:
.long 42
.globl _delta
Ltmp3:
.long _foo@GOT-Ltmp3
llvm-svn: 231474
Summary:
None of the .set directives can be used before the .module directives. The .set mips0/pop/push were not triggering this constraint.
Also added testing for all the other implemented directives which are supposed to trigger this constraint.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7140
llvm-svn: 231465
Specifically this:
* Prevents an "unused" warning in non-assert builds.
* In that error case return with out removing a child loop instead of
looping forever.
llvm-svn: 231459
This pass interchanges loops to provide a more cache-friendly memory access.
For e.g. given a loop like -
for(int i=0;i<N;i++)
for(int j=0;j<N;j++)
A[j][i] = A[j][i]+B[j][i];
is interchanged to -
for(int j=0;j<N;j++)
for(int i=0;i<N;i++)
A[j][i] = A[j][i]+B[j][i];
This pass is currently disabled by default.
To give a brief introduction it consists of 3 stages-
LoopInterchangeLegality : Checks the legality of loop interchange based on Dependency matrix.
LoopInterchangeProfitability: A very basic heuristic has been added to check for profitibility. This will evolve over time.
LoopInterchangeTransform : Which does the actual transform.
LNT Performance tests shows improvement in Polybench/linear-algebra/kernels/mvt and Polybench/linear-algebra/kernels/gemver becnmarks.
TODO:
1) Add support for reductions and lcssa phi.
2) Improve profitability model.
3) Improve loop selection algorithm to select best loop for interchange. Currently the innermost loop is selected for interchange.
4) Improve compile time regression found in llvm lnt due to this pass.
5) Fix issues in Dependency Analysis module.
A special thanks to Hal for reviewing this code.
Review: http://reviews.llvm.org/D7499
llvm-svn: 231458
We supported forming IMGREL relocations from ConstantExprs involving
__ImageBase if the minuend was a GlobalVariable. Extend this
functionality to all GlobalObjects.
llvm-svn: 231456
We extend an underlying file before mmap'ing it, but it's not needed
on Windows. Extending file is slow on Windows, so we should avoid doing that.
The difference gets larger as the size of an output file gets larger.
It shove off 2 seconds out of 25 seconds when linking chrome.dll with LLD,
for example.
llvm-svn: 231452
We would set the body of a struct type (therefore making it non-opaque)
but were forgetting to move it to the non-opaque set.
Fixes pr22807.
llvm-svn: 231442
These refactored computations check whether or not we are at a stage
of the sequence where we can perform a match. This patch moves the
computation out of the main dataflow and into
{BottomUp,TopDown}PtrState.
llvm-svn: 231439
This initialization occurs when we see a new retain or release. Before
we performed the actual initialization inline in the dataflow. That is
just messy.
llvm-svn: 231438
This will enable the main ObjCARCOpts dataflow to work with higher
level concepts such as "can this ptr state be modified by this ref
count" and not need to understand the nitty gritty details of how that
is determined. This makes the dataflow cleaner.
llvm-svn: 231437
Fixes llgo following Duncan's changes to debug info in r231082. llgo needs
to replace composite types, which are no longer represented using MDTuple.
llvm-svn: 231416
At this point, we should have decent coverage of the involved code. I've got a few more test cases to cleanup and submit, but what's here is already reasonable.
I've got a collection of liveness tests which will be posted for review along with a decent liveness algorithm in the next few days. Once those are in, the code in this file should be well tested and I can start renaming things without risk of serious breakage.
llvm-svn: 231414
This patch reduces code size for all AVX targets and increases speed for some chips.
SSE 4.1 introduced the useless (see code comments) 2-register form of BLENDV and
only in the packed float/double flavors.
AVX subsequently made the instruction useful by adding a 4-register operand form.
So we just need to paper over the lack of scalar forms of this instruction, complicate
the code to choose float or double forms, and use blendv on scalars since all FP is in
xmm registers anyway.
This gives us an approximately 50% speed up for a blendv microbenchmark sequence
on SandyBridge and Haswell:
blendv : 29.73 cycles/iter
logic : 43.15 cycles/iter
No new test cases with this patch because:
1. fast-isel-select-sse.ll tests the positive side for regular X86 lowering and fast-isel
2. sse-minmax.ll and fp-select-cmp-and.ll confirm that we're not firing for scalar selects without AVX
3. fp-select-cmp-and.ll and logical-load-fold.ll confirm that we're not firing for scalar selects with constants.
http://llvm.org/bugs/show_bug.cgi?id=22483
Differential Revision: http://reviews.llvm.org/D8063
llvm-svn: 231408
This is what all the targets check for and is consistent with the
initialized value of MissingFeatures, which is sometimes assinged
to ErrorInfo.
llvm-svn: 231397
This commit enables forming vector extloads for ARM.
It only does so for legal types, and when we can't fold the extension
in a wide/long form of the user instruction.
Enabling it for larger types isn't as good an idea on ARM as it is on
X86, because:
- we pretend that extloads are legal, but end up generating vld+vmov
- we have instructions like vld {dN, dM}, which can't be generated
when we "manually expand" extloads to vld+vmov.
For legal types, the combine doesn't fire that often: in the
integration tests only in a big endian testcase, where it removes a
pointless AND.
Related to rdar://19723053
Differential Revision: http://reviews.llvm.org/D7423
llvm-svn: 231396
This will be followed by a change on the clang side to update
the only user of this function with the new version.
Differential Revision: http://reviews.llvm.org/D8074
Reviewed By: Reid Kleckner
llvm-svn: 231392
The first element of STACKFRAME64 is a struct and Clang wants us to put
braces around it's initialization. Instead, drop the zero. The result
should be the same.
llvm-svn: 231387
llvm::sys::PrintBacktrace(FILE*) is supposed to print a backtrace
of the current thread given the current PC. This function was
unimplemented on Windows, and instead the only time we could
print a backtrace was as the result of an exception through
LLVMUnhandledExceptionFilter.
This patch implements backtracing of self by using
RtlCaptureContext to get a CONTEXT for the current thread, and
moving the printing and StackWalk64 code to a common method that
printing own stack trace and printing stack trace of an exception
can use.
Differential Revision: http://reviews.llvm.org/D8068
Reviewed by: Reid Kleckner
llvm-svn: 231382
Currently shuffles may only be combined if they are of the same type, despite the fact that bitcasts are often introduced in between shuffle nodes (e.g. x86 shuffle type widening).
This patch allows a single input shuffle to peek through bitcasts and if the input is another shuffle will merge them, shuffling using the smallest sized type, and re-applying the bitcasts at the inputs and output instead.
Dropped old ShuffleToZext test - this patch removes the use of the zext and vector-zext.ll covers these anyhow.
Differential Revision: http://reviews.llvm.org/D7939
llvm-svn: 231380
Added lowering for ISD::CONCAT_VECTORS and ISD::INSERT_SUBVECTOR for i1 vectors,
it is needed to pass all masked_memop.ll tests for SKX.
llvm-svn: 231371
Also it extracts getCopyFromRegs helper function in SelectionDAGBuilder as we need to be able to customize type of the register exported from basic block during lowering of the gc.result.
llvm-svn: 231366
Build time (user time) for building llvm+clang+lldb in release mode:
- default allocator: 9086 seconds
- with PBQP: 9126 seconds
- with PBQP + local bit matrix cache: 9097 seconds
llvm-svn: 231360
isNormalFp and isFiniteNonZeroFp should not assume vector operands can not be constant expressions.
Patch by Pawel Jurek <pawel.jurek@intel.com>
Differential Revision: http://reviews.llvm.org/D8053
llvm-svn: 231359
This should help with the AVX512 masked gather changes Elena is working on. This patch is derived from some of the changes Elena made to tablegen, but modified by me to support arbitrary number of results.
llvm-svn: 231357
These came from my own experience and may not apply equally to all use cases. Any alternate perspective anyone has should be used to refine these.
As always, grammar and spelling adjustments are more than welcome. Please just directly commit a fix if you see something problematic.
llvm-svn: 231352
already been added and the inconsistency made choosing names and
changing code more annoying. Plus, wow are they better for this code!
llvm-svn: 231347
result reasonable.
This code predated clang-format and so there was a reasonable amount of
crufty formatting that had accumulated. This should ensure that neither
myself nor others end up with formatting-only changes sneaking into
other fixes.
llvm-svn: 231341
just arbitrarily interleaving unrelated control flows once they get
moved "out-of-line" (both outside of natural CFG ordering and with
diamonds that cannot be fully laid out by chaining fallthrough edges).
This easy solution doesn't work in practice, and it isn't just a small
bug. It looks like a very different strategy will be required. I'm
working on that now, and it'll again go behind some flag so that
everyone can experiment and make sure it is working well for them.
llvm-svn: 231332
Improve test robustness in preparation of coming commits:
- Avoid undefs which may get propagated too much.
- Remove several pointless add 0, instructions
llvm-svn: 231307
Summary:
rL225282 introduced an ad-hoc way to promote some additions to nuw or
nsw. Since then SCEV has become smarter in directly proving no-wrap;
and using the canonical "ext(A op B) == ext(A) op ext(B)" method of
proving no-wrap is just as powerful now. Rip out the existing
complexity in favor of getting SCEV to do all the heaving lifting
internally.
This change does not add any unit tests because it is supposed to be a
non-functional change. Tests added in rL225282 and rL226075 are valid
tests for this change.
Reviewers: atrick, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7981
llvm-svn: 231306
Summary:
Teach SCEV to prove no overflow for an add recurrence by proving
something about the range of another add recurrence a loop-invariant
distance away from it.
Reviewers: atrick, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7980
llvm-svn: 231305
This commit adds code to emit DIE trees that have been pruned from the
parts that haven't been marked as kept in the previous pass.
It works by 'cloning' the input DIE tree (as read by libDebugInfoDwarf)
into a tree of DIE objects. Cloning the DIEs means essentially cloning
their attributes. The code in this commit does only handle scalar and
block attributes (scalar because they are trivial, blocks because they
can't be easily replaced by a scalr placeholder), all the other ones
are replaced by placeholder zero values and will be handled in
further commits.
The added tests mostly check that the DIE tree has the correct layout and
also verify that a few chosen scalar and block attributes correctly make
their way into the output.
llvm-svn: 231300
To be used/tested by llvm-dsymutil. (llvm-dsymutil does a 'static' link,
no need for relocations for most things, so it'll just emit raw integers
for most attributes)
llvm-svn: 231298
Here's a rough/first draft - it at least hits the actual textual IR
examples and some of the phrasing. It's probably worth a full pass over,
but I'm not sure how much these docs should reflect the strange
intermediate state we're in anyway.
Totally open to lots of review/feedback/suggestions.
llvm-svn: 231294
When calling lock() after all passes are registered, the PassRegistry doesn't need a mutex anymore to look up passes.
This speeds up multithreaded llvm execution by ~5% (tested with 4 threads).
In an asserts build of llvm this has an even bigger impact.
Note that it's not required to use the lock function.
llvm-svn: 231276
Reverted in r231254 due to a self-hosting crash of Clang (see Clang
PR22793). Workaround the crash by using {} instead of = default to
define a dtor.
llvm-svn: 231274
The issue was that we were always printing the remarks. Fix that and add a test
showing that it prints nothing if -pass-remarks is not given.
Original message:
Correctly handle -pass-remarks in the gold plugin.
llvm-svn: 231273
Summary:
DataLayout keeps the string used for its creation.
As a side effect it is no longer needed in the Module.
This is "almost" NFC, the string is no longer
canonicalized, you can't rely on two "equals" DataLayout
having the same string returned by getStringRepresentation().
Get rid of DataLayoutPass: the DataLayout is in the Module
The DataLayout is "per-module", let's enforce this by not
duplicating it more than necessary.
One more step toward non-optionality of the DataLayout in the
module.
Make DataLayout Non-Optional in the Module
Module->getDataLayout() will never returns nullptr anymore.
Reviewers: echristo
Subscribers: resistor, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D7992
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 231270
This reverts r231200 and r231204. The second one added an explicit move
ctor for MSVC.
This change broke the clang-cl self-host due to weirdness in MSVC's
implementation of std::map::insert. Somehow we lost our rvalue ref-ness
when going through variadic placement new:
template <class _Objty, class... _Types>
void construct(_Objty *_Ptr,
_Types &&... _Args) { // construct _Objty(_Types...) at _Ptr
::new ((void *)_Ptr) _Objty(_STD forward<_Types>(_Args)...);
}
For some reason, Clang decided to call the deleted std::pair copy
constructor at this point. Needs further investigation, once I can
build.
llvm-svn: 231269
Summary:
In PNaCl, most atomic instructions have their own @llvm.nacl.atomic.* function, each one, with a few exceptions, represents a consistent behaviour across all NaCl-supported targets. Unfortunately, the atomic RMW operations nand, [u]min, and [u]max aren't directly represented by any such @llvm.nacl.atomic.* function. This patch refines shouldExpandAtomicRMWInIR in TargetLowering so that a future `Le32TargetLowering` class can selectively inform the caller how the target desires the atomic RMW instruction to be expanded (ie via load-linked/store-conditional for ARM/AArch64, via cmpxchg for X86/others?, or not at all for Mips) if at all.
This does not represent a behavioural change and as such no tests were added.
Patch by: Richard Diamond.
Reviewers: jfb
Reviewed By: jfb
Subscribers: jfb, aemerson, t.p.northover, llvm-commits
Differential Revision: http://reviews.llvm.org/D7713
llvm-svn: 231250
This "itinerary class map" in PPCSchedule.td is incomplete and
redundant with the actual code. As it provides no value, we've
decided to remove it.
No functional change.
llvm-svn: 231246
The target-independent selection algorithm in FastISel already knows how
to select a SINT_TO_FP if the target is SSE but not AVX.
On targets that have SSE but not AVX, the tablegen'd 'fastEmit' functions
for ISD::SINT_TO_FP know how to select instruction X86::CVTSI2SSrr
(for an i32 to f32 conversion) and X86::CVTSI2SDrr (for an i32 to f64
conversion).
This patch simplifies the logic in method X86SelectSIToFP knowing that
the code would not be reachable if the subtarget doesn't have AVX.
No functional change intended.
llvm-svn: 231243
Do not instrument direct accesses to stack variables that can be
proven to be inbounds, e.g. accesses to fields of structs on stack.
But it eliminates 33% of instrumentation on webrtc/modules_unittests
(number of memory accesses goes down from 290152 to 193998) and
reduces binary size by 15% (from 74M to 64M) and improved compilation time by 6-12%.
The optimization is guarded by asan-opt-stack flag that is off by default.
http://reviews.llvm.org/D7583
llvm-svn: 231241
Summary:
Use more reasonable names for these pseudo-instructions.
As there's only one definition tied to any one of these classes, I named them with abbreviated versions of their respective class' name.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7831
llvm-svn: 231240
Summary:
Move the "Filler" parameter to the end of the parameter list as it is,
conceptually, the only output parameter of that function.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7726
llvm-svn: 231239
a flag for now.
First off, thanks to Daniel Jasper for really pointing out the issue
here. It's been here forever (at least, I think it was there when
I first wrote this code) without getting really noticed or fixed.
The key problem is what happens when two reasonably common patterns
happen at the same time: we outline multiple cold regions of code, and
those regions in turn have diamonds or other CFGs for which we can't
just topologically lay them out. Consider some C code that looks like:
if (a1()) { if (b1()) c1(); else d1(); f1(); }
if (a2()) { if (b2()) c2(); else d2(); f2(); }
done();
Now consider the case where a1() and a2() are unlikely to be true. In
that case, we might lay out the first part of the function like:
a1, a2, done;
And then we will be out of successors in which to build the chain. We go
to find the best block to continue the chain with, which is perfectly
reasonable here, and find "b1" let's say. Laying out successors gets us
to:
a1, a2, done; b1, c1;
At this point, we will refuse to lay out the successor to c1 (f1)
because there are still un-placed predecessors of f1 and we want to try
to preserve the CFG structure. So we go get the next best block, d1.
... wait for it ...
Except that the next best block *isn't* d1. It is b2! d1 is waaay down
inside these conditionals. It is much less important than b2. Except
that this is exactly what we didn't want. If we keep going we get the
entire set of the rest of the CFG *interleaved*!!!
a1, a2, done; b1, c1; b2, c2; d1, f1; d2, f2;
So we clearly need a better strategy here. =] My current favorite
strategy is to actually try to place the block whose predecessor is
closest. This very simply ensures that we unwind these kinds of CFGs the
way that is natural and fitting, and should minimize the number of cache
lines instructions are spread across.
It also happens to be *dead simple*. It's like the datastructure was
specifically set up for this use case or something. We only push blocks
onto the work list when the last predecessor for them is placed into the
chain. So the back of the worklist *is* the nearest next block.
Unfortunately, a change like this is going to cause *soooo* many
benchmarks to swing wildly. So for now I'm adding this under a flag so
that we and others can validate that this is fixing the problems
described, that it seems possible to enable, and hopefully that it fixes
more of our problems long term.
llvm-svn: 231238
This commit fixes a bug introduced in r230956 where we were creating
CMovFP_{T,F} nodes with multiple return value types (one for each operand).
With this change the return value type of the new node is the same as the
value type of the True/False operands of the original node.
llvm-svn: 231237
In a CFG with the edges A->B->C and A->C, B is an optional branch.
LLVM's default behavior is to lay the blocks out naturally, i.e. A, B,
C, in order to improve code locality and fallthroughs. However, if a
function contains many of those optional branches only a few of which
are taken, this leads to a lot of unnecessary icache misses. Moving B
out of line can work around this.
Review: http://reviews.llvm.org/D7719
llvm-svn: 231230
As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU linkers
ld.bfd and ld.gold currently only support a subset of the whole range of AArch64
ELF TLS relocations. Furthermore, they assume that some of the code sequences to
access thread-local variables are produced in a very specific sequence.
When the sequence is not as the linker expects, it can silently mis-relaxe/mis-optimize
the instructions.
Even if that wouldn't be the case, it's good to produce the exact sequence,
as that ensures that linkers can perform optimizing relaxations.
This patch:
* implements support for 16MiB TLS area size instead of 4GiB TLS area size. Ideally clang
would grow an -mtls-size option to allow support for both, but that's not part of this patch.
* by default doesn't produce local dynamic access patterns, as even modern ld.bfd and ld.gold
linkers do not support the associated relocations. An option (-aarch64-elf-ldtls-generation)
is added to enable generation of local dynamic code sequence, but is off by default.
* makes sure that the exact expected code sequence for local dynamic and general dynamic
accesses is produced, by making use of a new pseudo instruction. The patch also removes
two (AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing AArch64-specific pseudo
SDNode instructions that are superseded by the new one (TLSDESC_CALLSEQ).
llvm-svn: 231227
Asserting that the source and destination iterators are from the same
region is unnecessary - there's no reason to disallow reassignment from
any regions, so long as they aren't compared.
llvm-svn: 231224
When trying to convert a BUILD_VECTOR into a shuffle, we try to split a single source vector that is twice as wide as the destination vector.
We can not do this when we also need the zero vector to create a blend.
This fixes PR22774.
Differential Revision: http://reviews.llvm.org/D8040
llvm-svn: 231219
Since OptionValue (& its base classes) have user-declared dtors, use of
the implicit copy ctor/assignment operator is deprecated in C++11.
Provide them explicitly (defaulted) to avoid depending on this
deprecated feature.
llvm-svn: 231218
These objects are never polymorphically owned, so there's no need for
virtual dtors - just make the dtor protected in the base classes, and
make the derived classes final.
llvm-svn: 231217
This will now display enum definitions both at the global
scope as well as nested inside of classes. Additionally,
it will no longer display enums at the global scope if the
enum is nested. Instead, it will omit the definition of
the enum globally and instead emit it in the corresponding
class definition.
llvm-svn: 231215
(They are called emitDwarfDIE and emitDwarfAbbrevs in their new home)
llvm-dsymutil wants to reuse that code, but it doesn't have a DwarfUnit or
a DwarfDebug object to call those. It has access to an AsmPrinter though.
Having emitDIE in the AsmPrinter also removes the DwarfFile dependency
on DwarfDebug, and thus the patch drops that field.
Differential Revision: http://reviews.llvm.org/D8024
llvm-svn: 231210
GCC 4.7's libstdc++ doesn't have std::map::emplace, but it does have
std::unordered_map::emplace, and the use case here doesn't appear to
need ordering. The container has been changed in a separate/precursor
patch, and now this patch should hopefully build cleanly even with
GCC 4.7.
& then I realized the order of the container did matter, so extra
handling of ordering was added in r231189.
Original commit message:
This makes LiveRange non-copyable, and LiveInterval is already
non-movable (due to the explicit dtor), so now it's non-copyable and
non-movable.
Fix the one case where we were relying on the (deprecated in C++11)
implicit copy ctor of LiveInterval (which happened to work because the
ctor created an object with a null segmentSet, so double-deleting the
null pointer was fine).
llvm-svn: 231192
The order of this container was needed at one point - so, at that point
create a temporary array of pointers, sort those, then iterate them.
This keeps lookup efficient (& the lesser issue, of allowing the use of
emplace... ), object identity preserved, and ordered iteration in the
one place that requires it.
While this has no functional change, I realize it does mean allocating
an extra data structure and performing a sort - so if this looks suspect
to anyone regarding perf characteristics, I'm all ears.
llvm-svn: 231189
There is a known bug where the register coalescer fails to merge
subranges when multiple ranges end up in the "overflow" bit 32 of the
lanemasks. A proper fix for this is complicated so for now this is a
workaround which lets the register coalescer drop the subregister
liveness information (we just loose some precision by that) and
continue.
llvm-svn: 231186
Apparently something does care about ordering of LiveIntervals... so
revert all that stuff (r231175, r231176, r231177) & take some time to
re-evaluate.
llvm-svn: 231184
RewriteStatepointsForGC pass emits an alloca for each GC pointer which will be relocated. It then inserts stores after def and all relocations, and inserts loads before each use as well. In the end, mem2reg is used to update IR with relocations in SSA form.
However, there is a problem with inserting stores for values defined by invoke instructions. The code didn't expect a def was a terminator instruction, and inserting instructions after these terminators resulted in malformed IR.
This patch fixes this problem by handling invoke instructions as a special case. If the def is an invoke instruction, the store will be inserted at the beginning of the normal destination block. Since return value from invoke instruction does not dominate the unwind destination block, no action is needed there.
Patch by: Chen Li
Differential Revision: http://reviews.llvm.org/D7923
llvm-svn: 231183
The intrinsic is no longer generated by the front-end. Remove the intrinsic and
auto-upgrade it to a vector shuffle.
Reviewed by Nadav
This is related to rdar://problem/18742778.
llvm-svn: 231182
GCC 4.7's libstdc++ doesn't have std::map::emplace, but it does have
std::unordered_map::emplace, and the use case here doesn't appear to
need ordering. The container has been changed in a separate/precursor
patch, and now this patch should hopefully build cleanly even with
GCC 4.7.
Original commit message:
This makes LiveRange non-copyable, and LiveInterval is already
non-movable (due to the explicit dtor), so now it's non-copyable and
non-movable.
Fix the one case where we were relying on the (deprecated in C++11)
implicit copy ctor of LiveInterval (which happened to work because the
ctor created an object with a null segmentSet, so double-deleting the
null pointer was fine).
llvm-svn: 231176
This use case doesn't appear to benefit from ordering, and
std::unordered_map has the advantage that it supports emplace (the
LiveInterval values really shouldn't be copyable or movable & they won't
be in a near-future patch).
llvm-svn: 231175
Summary:
This makes it more obvious that the enum definition and the
"StandardName" array is in sync. Mechanically refactored w/ a
python script.
Test Plan: still compiles
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7845
llvm-svn: 231172
This makes LiveRange non-copyable, and LiveInterval is already
non-movable (due to the explicit dtor), so now it's non-copyable and
non-movable.
Fix the one case where we were relying on the (deprecated in C++11)
implicit copy ctor of LiveInterval (which happened to work because the
ctor created an object with a null segmentSet, so double-deleting the
null pointer was fine).
llvm-svn: 231168
Introduce -mllvm -sanitizer-coverage-8bit-counters=1
which adds imprecise thread-unfriendly 8-bit coverage counters.
The run-time library maps these 8-bit counters to 8-bit bitsets in the same way
AFL (http://lcamtuf.coredump.cx/afl/technical_details.txt) does:
counter values are divided into 8 ranges and based on the counter
value one of the bits in the bitset is set.
The AFL ranges are used here: 1, 2, 3, 4-7, 8-15, 16-31, 32-127, 128+.
These counters provide a search heuristic for single-threaded
coverage-guided fuzzers, we do not expect them to be useful for other purposes.
Depending on the value of -fsanitize-coverage=[123] flag,
these counters will be added to the function entry blocks (=1),
every basic block (=2), or every edge (=3).
Use these counters as an optional search heuristic in the Fuzzer library.
Add a test where this heuristic is critical.
llvm-svn: 231166
Ultimately, we'll need to leave something behind to indicate which
alloca will hold the exception, but we can figure that out when it comes
time to emit the __CxxFrameHandler3 catch handler table.
llvm-svn: 231164
Selection conditions may be vectors or scalars. Make sure InstCombine
doesn't indiscriminately assume that a select which is value dependent
on another select have identical select condition types.
This fixes PR22773.
llvm-svn: 231156
From:
int M, total;
void foo() {
int i;
for (i = 0; i < M; i++) {
total = total + i / 2;
}
}
This is the kernel loop:
.LBB0_2: # %for.body
=>This Inner Loop Header: Depth=1
movl %edx, %esi
movl %ecx, %edx
shrl $31, %edx
addl %ecx, %edx
sarl %edx
addl %esi, %edx
incl %ecx
cmpl %eax, %ecx
jl .LBB0_2
--------------------------
The first mov insn "movl %edx, %esi" could be removed if we change "addl %esi, %edx" to "addl %edx, %esi".
The IR before TwoAddressInstructionPass is:
BB#2: derived from LLVM BB %for.body
Predecessors according to CFG: BB#1 BB#2
%vreg3<def> = COPY %vreg12<kill>; GR32:%vreg3,%vreg12
%vreg2<def> = COPY %vreg11<kill>; GR32:%vreg2,%vreg11
%vreg7<def,tied1> = SHR32ri %vreg3<tied0>, 31, %EFLAGS<imp-def,dead>; GR32:%vreg7,%vreg3
%vreg8<def,tied1> = ADD32rr %vreg3<tied0>, %vreg7<kill>, %EFLAGS<imp-def,dead>; GR32:%vreg8,%vreg3,%vreg7
%vreg9<def,tied1> = SAR32r1 %vreg8<kill,tied0>, %EFLAGS<imp-def,dead>; GR32:%vreg9,%vreg8
%vreg4<def,tied1> = ADD32rr %vreg9<kill,tied0>, %vreg2<kill>, %EFLAGS<imp-def,dead>; GR32:%vreg4,%vreg9,%vreg2
%vreg5<def,tied1> = INC64_32r %vreg3<kill,tied0>, %EFLAGS<imp-def,dead>; GR32:%vreg5,%vreg3
CMP32rr %vreg5, %vreg0, %EFLAGS<imp-def>; GR32:%vreg5,%vreg0
%vreg11<def> = COPY %vreg4; GR32:%vreg11,%vreg4
%vreg12<def> = COPY %vreg5<kill>; GR32:%vreg12,%vreg5
JL_4 <BB#2>, %EFLAGS<imp-use,kill>
Now TwoAddressInstructionPass will choose vreg9 to be tied with vreg4. However, it doesn't see that there is copy from vreg4 to vreg11 and another copy from vreg11 to vreg2 inside the loop body. To remove those copies, it is necessary to choose vreg2 to be tied with vreg4 instead of vreg9. This code pattern commonly appears when there is reduction operation in a loop.
So check for a reversed copy chain and if we encounter one then we can commute the add instruction so we can avoid a copy.
Patch by Wei Mi.
http://reviews.llvm.org/D7806
llvm-svn: 231148
Summary:
This does not conceptually belongs here. Instead provide a shortcut
getModule() that provides access to the DataLayout.
Reviewers: chandlerc, echristo
Reviewed By: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8027
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 231147
I removed the copy ctor, thinking that'd be the end of it - these
iterators should be perfectly assignable even from disjoint ranges (as
any iterator would be) - exkcept that the member was const.
Unconstify it.
llvm-svn: 231146
The assertion was just checking a class invariant that's pretty easy to
verify by inspection (no mutating operations, and the two non-copy ctors
already ensure the state is maintained) so remove the explicit copy ctor
in favor of the default, thus allowing the use of the default copy
assignment operator without hitting the C++11 deprecation here.
llvm-svn: 231143
There's no reason to disallow assigning an iterator from one range to an
iterator that previously iterated over a disjoint range. This then
follows the Rule of Zero, allowing implicit copy construction to be used
without hitting the case that's deprecated in C++11.
llvm-svn: 231142
There doesn't seem to be any need to assert that iterator assignment is
between iterators over the same node - if you want to reuse an iterator
variable to iterate another node, that's perfectly acceptable. Just
don't mix comparisons between iterators into disjoint sequences, as
usual.
llvm-svn: 231138
Accidentally committed a few more of these cleanup changes than
intended. Still breaking these out & tidying them up.
This reverts commit r231135.
llvm-svn: 231136
There doesn't seem to be any need to assert that iterator assignment is
between iterators over the same node - if you want to reuse an iterator
variable to iterate another node, that's perfectly acceptable. Just
don't mix comparisons between iterators into disjoint sequences, as
usual.
llvm-svn: 231135
There doesn't seem to be any need to assert that iterator assignment is
between iterators over the same node - if you want to reuse an iterator
variable to iterate another node, that's perfectly acceptable. Just
don't mix comparisons between iterators into disjoint sequences, as
usual.
llvm-svn: 231134
This type could be made copyable (= default a protected copy ctor in the
base class, and preferably make the derived class final to avoid risks
of providing a slicing copy operation to further derived classes) but it
seemed easier to avoid that complexity for a dump function that I assume
(by symmetry with ResourcePriorityQueue's dump, which was actively
buggy) not often used.
llvm-svn: 231133
Previously we had only Linux using DTPOFF for these; all X86 ELF
targets should. Fixes a side issue mentioned in PR21077.
Differential Revision: http://reviews.llvm.org/D8011
llvm-svn: 231130
This patch was landed in r231035 and reverted because it was buggy.
This is fixed version of the same change.
Summary:
This patch is an attempt at making `DenseMapIterator`s "fail-fast".
Fail-fast iterators that have been invalidated due to insertion into
the host `DenseMap` deterministically trip an assert (in debug mode)
on access, instead of non-deterministically hitting memory corruption
issues.
Reviewers: dexonsmith, dberlin, ruiu, chandlerc
Reviewed By: chandlerc
Subscribers: yaron.keren, chandlerc, llvm-commits
Differential Revision: http://reviews.llvm.org/D7931
llvm-svn: 231125
frame register before checking if there is a DWARF register number for it.
Thanks to H.J. Lu for diagnosing this and providing the testcase!
llvm-svn: 231121
Without this, use of this copy ctor is deprecated in C++11 due to the
presence of a user-declared dtor.
Marking the class final is just a little extra security that there are
no further derived classes that may then end up using the intermediate
base class's copy assignment operator and cause slicing to occur.
I didn't bother marking the other (non-test) base class final, since it
has reference members so it won't have any implicit assignment operators
anyway. Open to ideas on that, though.
We probably want a warning about use of a slicing assignment operator,
then I wouldn't worry so much about marking the class as final.
llvm-svn: 231114
Sanjay Patel