Retrying r268550/r268751 which were reverted at r268577/r268765 due a memory sanitizer failure.
I have not been able to reproduce that failure, but I've taken another guess at fixing
the problem in this version of the patch and will watch for another failure.
Original commit message:
Unlike earlier similar fixes, we need to recalculate the branch weights
in this case.
Differential Revision: http://reviews.llvm.org/D19674
llvm-svn: 268767
Added support for sendmsg(MSG[, OP[, STREAM_ID]]) syntax
in s_sendmsg and s_sendmsghalt instructions.
The syntax matches the SP3 assembler/disassembler rules.
That is why implicit inputs (like M0 and EXEC) are not printed
to disassembly output anymore.
sendmsg(...) allows only known message types and attributes,
even if literals are used instead of symbolic names.
However, raw literal (without "sendmsg") still can be used,
and that allows for any 16-bit value.
Tests updated/added.
Differential Revision: http://reviews.llvm.org/D19596
llvm-svn: 268762
Instead of passing around sizes and asking for subregs, we can check
the subreg indices we care about: sub_8bit_hi and sub_8bit.
Differential Revision: http://reviews.llvm.org/D20006
llvm-svn: 268753
Retrying r268550 which was reverted at r268577 due a memory sanitizer failure.
I have not been able to reproduce that failure, but I've taken a guess at fixing
the problem in this version of the patch and will watch for another failure.
Original commit message:
Unlike earlier similar fixes, we need to recalculate the branch weights
in this case.
Differential Revision: http://reviews.llvm.org/D19674
llvm-svn: 268751
Summary:
If a function needs to allocate both callee-save stack memory and local
stack memory, we currently decrement/increment the SP in two steps:
first for the callee-save area, and then for the local stack area. This
changes the code to allocate them both at once at the very beginning/end
of the function. This has two benefits:
1) there is one fewer sub/add micro-op in the prologue/epilogue
2) the stack adjustment instructions act as a scheduling barrier, so
moving them to the very beginning/end of the function increases post-RA
scheduler's ability to move instructions (that only depend on argument
registers) before any of the callee-save stores
This change can cause an increase in instructions if the original local
stack SP decrement could be folded into the first store to the stack.
This occurs when the first local stack store is to stack offset 0. In
this case we are trading off one more sub instruction for one fewer sub
micro-op (along with benefits (2) and (3) above).
Reviewers: t.p.northover
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18619
llvm-svn: 268746
Summary: This change refactors to decouple the zero store promotion from the narrow ld merge and add a flag (enable-narrow-ld-merge=true) to control the narrow ld merge optimization.
Reviewers: jmolloy, t.p.northover, mcrosier
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19885
llvm-svn: 268744
Summary:
Direct object emission has an initialization order problem where an
InitMCObjectFile is called after MipsTargetELFStreamer determines whether
PIC is enabled by default or not. There doesn't seem to be point that
initializes all cases so split the responsibility between
MipsTargetELFStreamer and MipsAsmPrinter.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: http://reviews.llvm.org/D19728
llvm-svn: 268737
Summary:
There seems to have been a misunderstanding as to the meaning of 'offset' in
the rules laid down by our ABI. The previous code believed that 'offset' meant
the offset within the section that the relocation is applied to. However, it
should have meant the offset from the symbol used in the relocation expression.
This patch adds two fields to ELFRelocationEntry and uses them to correct the
order of relocations for MIPS. These fields contain:
* The original symbol before shouldRelocateWithSymbol() is considered. This
ensures that R_MIPS_GOT16 is able to correctly distinguish between local and
external symbols, allowing us to tell whether %got() requires a matching
%lo() or not (local symbols require one, external symbols don't). It also
prevents confusing cases where the fuzzy matching rules cause things like
%hi(foo)/%lo(foo+3) and %hi(bar)/%lo(bar+1) to swap their %lo()'s.
* The original offset before shouldRelocateWithSymbol() is considered. The
existing Addend field is always zero when the object uses in place addends
(because it's already moved it to the encoding) but MIPS needs to use the
original offset to ensure that the linker correctly calculates the carry-in
bit for %hi() and %got().
IAS ensures that unmatchable %hi()/%got() relocations are placed at the end of
the table to ensure that the linker rejects the table (we're unable to report
such errors directly). The alternatives to this risk accidental matching
against inappropriate relocations which may silently compute incorrect values
due to an incorrect carry bit between the %lo() and %hi()/%got().
Reviewers: sdardis
Subscribers: dsanders, sdardis, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D19718
llvm-svn: 268733
Summary:
This stops it misidentifying unconditional branches as conditional branches
which fixes a -verify-machineinstrs error about exiting a function via fall through.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D19864
llvm-svn: 268731
Summary:
This change allows to specify "DefaultMethod" for optional operand (IsOptional = 1) in AsmOperandClass that return default value for operand. This is used in convertToMCInst to set default values in MCInst.
Previously if you wanted to set default value for operand you had to create custom converter method. With this change it is possible to use standard converters even when optional operands presented.
Reviewers: tstellarAMD, ab, craig.topper
Subscribers: jyknight, dsanders, arsenm, nhaustov, llvm-commits
Differential Revision: http://reviews.llvm.org/D18242
llvm-svn: 268726
Allowing overriding the default ASAN shadow mapping offset with the
-asan-shadow-offset option, and allow zero to be specified for both offset and
scale.
Patch by Aaron Carroll <aaronc@apple.com>.
llvm-svn: 268724
Summary:
Check calling convention in AMDGPUMachineFunction::isKernel
This will be used for AMDGPU_HSA_KERNEL symbol type in output ELF.
Also, in the future unused non-kernels may be optimized.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19917
llvm-svn: 268719
Summary:
This will be used for AMDGPU_HSA_KERNEL symbol type in output ELF.
Also, in the future unused non-kernels may be optimized.
For now, also accept SPIR_KERNEL for HCC frontend.
Also, add bitcode compatibility tests for missing calling conventions
except AVR_BUILTIN which doesn't have parse code.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, joker.eph, llvm-commits
llvm-svn: 268717
This test was crashing, and currently it breaks bootstrapping clang with debuginfo
Differential Revision: http://reviews.llvm.org/D20008
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 268715
If we don't, values that aren't precisely representable in f16 could
be used as-is in a promoted f32 operation, which would produce
incorrect results.
AArch64 had the correct behavior; add a focused test.
Fixes http://llvm.org/PR26871
llvm-svn: 268700
This change seems to speed up LLD a bit if it has a lot of mergeable
sections. The number is below. It's not too bad for a small patch.
Time to link Clang (debug build):
w/o patch 6.3696 seconds
w/patch 6.2746 seconds (-1.5%)
Differential Revision: http://reviews.llvm.org/D19933
llvm-svn: 268698
This message used to be correct, when all we cared about was whether the
dependence was safe (i.e. NoDep) or unsafe. With the current more
precise characterization, this is a forward dep.
llvm-svn: 268695
This is a step towards removing the rampant undefined behaviour in
SelectionDAG, which is a part of llvm.org/PR26808.
We rename SelectionDAGISel::Select to SelectImpl and update targets to
match, and then change Select to return void and consolidate the
sketchy behaviour we're trying to get away from there.
Next, we'll update backends to implement `void Select(...)` instead of
SelectImpl and eventually drop the base Select implementation.
llvm-svn: 268693
This opcode never happens in practice, and yet the logic we have in
place to handle it would be undefined behaviour if we ever executed
it. Remove it rather than trying to refactor code that's never
reached.
llvm-svn: 268692
This reverts commit r268658.
I incorrectly diagnose this as the source of an assertion during an
LTO bootstrap of clang.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 268680
Summary: We need to clean up CFG before assigning discriminator to minimize the impact of optimization on debug info.
Reviewers: davidxl, dblaikie, dnovillo
Subscribers: dnovillo, danielcdh, llvm-commits
Differential Revision: http://reviews.llvm.org/D19926
llvm-svn: 268675
The assertions were assuming that the linker will not ask to preserve
a global that is internal or available_externally, as it does not
really make sense. In practice this break the bootstrap of clang,
I degrade to a warning for now.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 268671
Summary:
As per the discussion on LLVM-dev this patch proposes removing LLVM_ENABLE_TIMESTAMPS.
The only complicated bit of this patch is the Windows support. On windows we used to log an error if /INCREMENTAL was passed to the linker when timestamps were disabled.
With this change since timestamps in code are always disabled we will always compile on windows with /Brepro unless /INCREMENTAL is specified, and we will log a warning when /INCREMENTAL is specified to notify the user that the build will be non-deterministic.
See: http://lists.llvm.org/pipermail/llvm-dev/2016-May/098990.html
Reviewers: bogner, silvas, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19892
llvm-svn: 268670
Given something like:
ldr r0, .LCPI0_0 (== pc-rel var)
add r0, pc
ldr r1, .LCPI0_1 (== pc-rel var)
add r1, pc
we cannot combine the 2 ldr instructions and litpools because they get added to
a different pc to form the correct address. I think the original logic came
from a time when we fused the LDRpci/PICADD instructions into one
pseudo-instruction so the PC was always immediately at-hand. That's no longer
the case.
Should fix general-dynamic TLS access on Linux, and quite possibly other -fPIC
code that relies on litpools (e.g. v6m and -Oz compilations) though trivial
tweaks of the .ll test didn't provoke anything.
llvm-svn: 268662
load commands.
The existing test case in test/Object/macho-invalid.test for
macho-invalid-too-small-segment-load-command has a cmdsize of 55, while
being too small also it is not a multiple of 4. So when that check is added
this test case will produce a different error. So I constructed a new test case
that will trigger the intended error.
I also changed the error message to be consistent with the other malformed Mach-O
file error messages which prints the load command index. I also removed both
object_error::macho_load_segment_too_small and
object_error::macho_load_segment_too_many_sections from Object/Error.h
as they are not needed and can just use object_error::parse_failed and let the
error message string distinguish the specific error.
llvm-svn: 268652
Summary:
Discovered by Dave Airlie, fixes an assertion in Khronos OpenGL CTS
GL43-CTS.shader_storage_buffer_object.advanced-matrix.
In this particular case, the buffer load intrinsic fed into a uniform
conditional branch, and led the brcond lowering down the wrong path.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D19931
llvm-svn: 268650
Summary:
Version 2 is now the default. If you want to emit version 1, use
the amdgcn--amdhsa-amdcov1 triple.
Reviewers: arsenm, kzhuravl
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D19283
llvm-svn: 268647
The instruction A2_tfrpi has a 64-bit operand, while the corresponding
intrinsic takes a 32-bit value. The actual value has only 8 significant
bits, so the difference is only in the type used to represent it.
In order to map the intrinsic to the instruction, the operand needs to
be extended to the correct type.
llvm-svn: 268635
Summary:
Some PHIs can have expressions that are not AddRecExprs due to the presence
of sext/zext instructions. In order to prevent the Loop Vectorizer from
bailing out when encountering these PHIs, we now coerce the SCEV
expressions to AddRecExprs using SCEV predicates (when possible).
We only do this when the alternative would be to not vectorize.
Reviewers: mzolotukhin, anemet
Subscribers: mssimpso, sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D17153
llvm-svn: 268633
This backend was supposed to generate C++ code which will re-construct
the LLVM IR passed as input. This seems to me to have very marginal
usefulness in the first place.
However, the code has never been updated to use IRBuilder, which makes
its current value negative -- people who look at the output may be
steered to use the *wrong* C++ APIs to construct IR.
Furthermore, it's generated code that doesn't compile since at least
2013.
Differential Revision: http://reviews.llvm.org/D19942
llvm-svn: 268631
[mips] On error, ParseDirective should always return false to signify that the
directive was understood.
Reviewers: dsanders, vkalintiris, sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: http://reviews.llvm.org/D19929
llvm-svn: 268630
Summary:
When launching ThinLTO backends in a distributed build (currently
supported in gold via the thinlto-index-only plugin option), emit
an individual index file for each backend process as described here:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098272.html
The individual index file encodes the summary and module information
required for implementing the importing/exporting decisions made
for a given module in the thin link step.
This is in place of the current mechanism that uses the combined index
to make importing decisions in each back end independently. It is an
enabler for doing global summary based optimizations in the thin link
step (which will be recorded in the individual index files), and reduces
the size of the index that must be sent to each backend process, and
the amount of work to scan it in the backends.
Rather than create entirely new ModuleSummaryIndex structures (and all
the included unique_ptrs) for each backend index file, a map is created
to record all of the GUID and summary pointers needed for a particular
index file. The IndexBitcodeWriter walks this map instead of the full
index (hiding the details of managing the appropriate summary iteration
in a new iterator subclass). This is more efficient than walking the
entire combined index and filtering out just the needed summaries during
each backend bitcode index write.
Depends on D19481.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19556
llvm-svn: 268627
Both Linux and kFreeBSD use glibc, so follow similiar code paths.
Add isTargetGlibc to check for this, and use it instead of isTargetLinux
in a few places.
Fixes PR22248 for kFreeBSD.
Differential Revision: http://reviews.llvm.org/D19104
llvm-svn: 268624
The result type of setcc is dependent on whether or not AVX512 is
present.
We had an X86-specific DAG-combine which assumed that the result type
should be i8 when it could be i1.
This meant that we would generate illegal setccs which LowerSETCC did
not like.
Instead, use an appropriate type and zero extend to i8.
Also, there were some scenarios where the fold should have fired but
didn't because we were overly cautious about the types. This meant that
we generated:
shrl $31, %edi
andl $1, %edi
kmovw %edi, %k0
kxnorw %k0, %k0, %k1
kshiftrw $15, %k1, %k1
kxorw %k1, %k0, %k0
kmovw %k0, %eax
instead of:
testl %edi, %edi
setns %al
This fixes PR27638.
llvm-svn: 268609
If the linker requested to preserve a linkonce function, we should
honor this even if we drop all uses.
We explicitely avoid turning them into weak_odr (unlike the first
version of this patch in r267644), because the codegen can be
different on Darwin: because of `llvm::canBeOmittedFromSymbolTable()`
we may emit the symbol as weak_def_can_be_hidden instead of
weak_definition.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 268607
This reverts commit r267644. Turning linkonce_odr into weak_odr is
a sementic change on Darwin: because of
`llvm::canBeOmittedFromSymbolTable()` we may emit the symbol as
weak_def_can_be_hidden instead of weak_definition.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 268606
This was a remaining of a previous scheme where some IPOs were taking
place before we enter this code. This is not relevant anymore.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 268605
The code here is recursively Select-ing a new Node to avoid issues
where N is CSE'd during replaceDAGValue and stops being valid. We can
accomplish the same goal in a more principled way by using a
HandleSDNode.
This is essentially a less dodgy fix for PR25733 than the original
attempt back in r255120.
llvm-svn: 268590
Allowing overriding the default ASAN shadow mapping offset with the
-asan-shadow-offset option, and allow zero to be specified for both offset and
scale.
llvm-svn: 268586
This introduces a SystemZ-specific "backchain" attribute on function, which
enables writing the frame backchain link as specified by the ABI. This will
be used to implement -mbackchain option in clang.
Differential Revision: http://reviews.llvm.org/D19889
Fixed in this version: added RegState::Define and RegState::Kill on R1D
in prologue.
llvm-svn: 268581
MemorySanitizer: use-of-uninitialized-value
0x4910e47 in count /mnt/b/sanitizer-buildbot2/sanitizer-x86_64-linux-bootstrap/build/llvm/include/llvm/Support/MathExtras.h:159:12
0x4910e47 in countLeadingZeros<unsigned long> /mnt/b/sanitizer-buildbot2/sanitizer-x86_64-linux-bootstrap/build/llvm/include/llvm/Support/MathExtras.h:183
0x4910e47 in FitWeights /mnt/b/sanitizer-buildbot2/sanitizer-x86_64-linux-bootstrap/build/llvm/lib/Transforms/Utils/SimplifyCFG.cpp:855
0x4910e47 in SimplifyCondBranchToCondBranch /mnt/b/sanitizer-buildbot2/sanitizer-x86_64-linux-bootstrap/build/llvm/lib/Transforms/Utils/SimplifyCFG.cpp:2895
This reverts commit 609f4dd4bf3bc735c8c047a4d4b0a8e9e4d202e2.
llvm-svn: 268577
This introduces a SystemZ-specific "backchain" attribute on function, which
enables writing the frame backchain link as specified by the ABI. This will
be used to implement -mbackchain option in clang.
Differential Revision: http://reviews.llvm.org/D19889
llvm-svn: 268571
The new register classes allow to tell the machine verifier that it is
fine to use RIP for address accesses in x32 mode. Prior to that patch,
we would complain that we are using a GR64 in place of GR32, whereas it
is actually fine to use GR64 for x32 as long as the 32 high bits are 0s.
RIP has this property and is used for RIP-relative addressing.
This partially fixes http://llvm.org/PR27481.
llvm-svn: 268567
Some vector bit operations are promoted instead of having custom lowering. This patch changes the isOperationLegalOrCustom tests for vector AND/OR operations to use a new TLI helper isOperationLegalOrCustomOrPromote instead, allowing the SSE implementations to stay on the simd unit.
Differential Revision: http://reviews.llvm.org/D19805
llvm-svn: 268561
This reapplies commit r268521, that was reverted in r268530 due to a test failure in select-implied.ll
Modified the test case to reflect the new change.
llvm-svn: 268557
Unlike earlier similar fixes, we need to recalculate the branch weights
in this case.
Differential Revision: http://reviews.llvm.org/D19674
llvm-svn: 268550
This patch adds support for estimating the square root, its reciprocal and
division or reciprocal using the combiner generic reciprocal machinery.
llvm-svn: 268539
Summary:
Port the dumper in llvm-readobj over to it.
I'm planning to use this visitor to power type stream merging.
While we're at it, try to switch from StringRef to ArrayRef<uint8_t> in some
places.
Reviewers: zturner, amccarth
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19899
llvm-svn: 268535
ConstantFold has logic to take icmp (bitcast x to y), null and strip the
bitcast. This makes sense in general, but not if x has floating-point type. In
this case, we'd need a fcmp, not an icmp, and the code will assert. We normally
don't see this situation because we constant fold fp -> int bitcasts, however,
we'll see it for bitcasts of ppc_fp128 -> i128. This is because that bitcast is
Endian-dependent, and as a result, we don't simplify it in ConstantFold (we
could, but no one has yet added the necessary logic). Regardless, ConstantFold
should not depend on that canonicalization for correctness.
llvm-svn: 268534
Summary:
Currently, when checking if a stack is "BigStack" or not, it doesn't count into spills and arguments. Therefore, LLVM won't reserve spill slot for this actually "BigStack". This may cause scavenger failure.
Reviewers: rengolin
Subscribers: aemerson, rengolin, tberghammer, danalbert, srhines, llvm-commits
Differential Revision: http://reviews.llvm.org/D19896
llvm-svn: 268529
In the current implementation compiler only prints stack trace
to console after crash. This patch adds saving of minidump
files which contain a useful subset of the information for
further debugging.
Differential Revision: http://reviews.llvm.org/D18216
llvm-svn: 268519
This patch corresponds to review:
http://reviews.llvm.org/D18592
It allows the PPC back end to generate the xxspltw instruction where we
previously only emitted vspltw.
llvm-svn: 268516
This patch fixes PR27615.
@llvm.dbg.value instructions no longer count towards the maximum number of
instructions to look back at in the instruction list when searching for a
store instruction. This should make the output consistent between debug and
non-debug build.
Patch by Henric Karlsson <henric.karlsson@ericsson.com>!
Differential Revision: http://reviews.llvm.org/D19912
llvm-svn: 268512
Vector bit operations are typically promoted instead of having custom lowering. This patch changes the isOperationLegalOrCustom tests for vector AND/OR operations to use isOperationLegalOrPromote instead, allowing the SSE implementations to stay on the simd unit.
Differential Revision: http://reviews.llvm.org/D19805
llvm-svn: 268504
Use std::make_pair instead of constructor
Use C++11 loop
Reuse helper var
Reviewers: tstellardAMD
Subsribers: arsenm
Differential Revision: http://reviews.llvm.org/D19787
llvm-svn: 268503
Goal of this change is to guarantee stable ordering of the statepoint arguments and other
newly inserted values such as gc.relocates. Previously we had explicit sorting in a couple
of places. However for unnamed values ordering was partial and overall we didn't have any
strong invariant regarding it. This change switches all data structures to use SetVector's
and MapVector's which provide possibility for deterministic iteration over them.
Explicit sorting is now redundant and was removed.
Differential Revision: http://reviews.llvm.org/D19669
llvm-svn: 268502
As requested by Rafael Espindola in his post-commit comments on r268036. This
makes the previous behaviour the default while still allowing verification of
IAS.
llvm-svn: 268496
Modification of previously existing code (variable rename only), with unit test added.
Differential Revision: http://reviews.llvm.org/D19368
llvm-svn: 268493
This code implements builtin_setjmp and builtin_longjmp exception handling intrinsics for 32-bit Sparc back-ends.
The code started as a mash-up of the PowerPC and X86 versions, although there are sufficient differences to both that had to be made for Sparc handling.
Note: I have manual tests running. I'll work on a unit test and add that to the rest of this diff in the next day.
Also, this implementation is only for 32-bit Sparc. I haven't focussed on a 64-bit version, although I have left the code in a prepared state for implementing this, including detecting pointer size and comments indicating where I suspect there may be differences.
Differential Revision: http://reviews.llvm.org/D19798
llvm-svn: 268483
We assumed that ConstantVectors would be rather uninteresting from the
perspective of analysis. However, this is not the case due to a quirk
of how LLVM handles vectors of i1. Vectors of i1 are not
ConstantDataVectors like vectors of i8, i16, i32 or i64 because i1's
SizeInBits differs from it's StoreSizeInBytes. This leads to it being
categorized as a ConstantVector instead of a ConstantDataVector.
Instead, treat ConstantVector more uniformly.
This fixes PR27591.
llvm-svn: 268479
i1 is now a legal type for X86 with AVX512.
There were some paths in X86FastISel which were not quite ready to see
an i1 value: they were not quite sure how to deal with sign/zero extends
for call arguments.
DTRT by extending to i8 for zeroext and bailing out of FastISel for
signext.
This fixes PR27591.
llvm-svn: 268470
We forgot to consider the target of ifuncs when considering if a
function was alive or dead.
N.B. Also update a few auxiliary tools like bugpoint and
verify-uselistorder.
This fixes PR27593.
llvm-svn: 268468
command has a size less than 8 bytes.
I think the existing test case in test/Object/macho-invalid.test for
macho64-invalid-too-small-load-command was trying to test for this but that
test case triggered a different error given how it was constructed. So I
constructed a new test case that would trigger this specific error.
I also changed the error message to be consistent with the other malformed Mach-O
file error messages. I also removed object_error::macho_small_load_command from
Object/Error.h as it is not needed and can just use object_error::parse_failed
and let the error message string distinguish the error.
llvm-svn: 268463
Ability to parse codeview type streams is also needed by
DebugInfoPDB for parsing PDBs, so moving this into a library
gives us this option. Since DebugInfoPDB had already hand
rolled some code to do this, that code is now convereted over
to using this common abstraction.
Differential Revision: http://reviews.llvm.org/D19887
Reviewed By: dblaikie, amccarth
llvm-svn: 268454
A loop pass that didn't preserve this entire set of passes wouldn't
play well with other loop passes, since these are generally a basic
requirement to do any interesting transformations to a loop.
Adds a helper to get the set of analyses a loop pass should preserve,
and checks that any loop pass we run satisfies the requirement.
llvm-svn: 268444
CovMapFuncReader::get should propagate up errors from InstrProfSymtab.
This is part of a series of patches to transition ProfileData over to
the stricter Error/Expected interface.
llvm-svn: 268428
pointing to the same addr space. This can prevent SROA from creating a bitcast
between pointers with different addr spaces.
Differential Revision: http://reviews.llvm.org/D19697
llvm-svn: 268424
The replaced load may have implicit-defs and those defs may be used
in the block of the original load. Make sure to update the liveness
accordingly.
This is a generalization of r267817.
llvm-svn: 268412
SCEV caches whether SCEV expressions are loop invariant, variant or
computable. LICM breaks this cache, almost by definition; so clear the
SCEV disposition cache if LICM changed anything.
llvm-svn: 268408
`Loop::makeLoopInvariant` can hoist instructions out of loops, so loop
dispositions for the loop it operated on may need to be cleared. We can
be smarter here (especially around how `forgetLoopDispositions` is
implemented), but let's be correct first.
Fixes PR27570.
llvm-svn: 268406
In the "LoopDispositions:" section:
- Instead of printing out a list, print out a "dictionary" to make it
obvious by inspection which disposition is for which loop. This is
just a cosmetic change.
- Print dispositions for parent _and_ sibling loops. I will use this
to write a test case.
llvm-svn: 268405
command other than the first one is past the end of the load commands.
This is like the test case in test/Object/macho-invalid.test for
macho64-invalid-incomplete-load-command but it is the second load command
that is past the end of all the load commands instead of the first.
The code in the constructor for MachOObjectFile that loops over the load
commands used getNextLoadCommandInfo() which was not producing
a good error message. So that was fixed and a test case was added.
llvm-svn: 268403
Be more specific in describing compression failures. Also, check for
this kind of error in emitNameData().
This is part of a series of patches to transition ProfileData over to
the stricter Error/Expected interface.
llvm-svn: 268400
This pass is supposed to reduce the size of the IR for compile time
purpose. We should run it ASAP, except when we prepare for LTO or
ThinLTO, and we want to keep them available for link-time inline.
Differential Revision: http://reviews.llvm.org/D19813
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 268394
Summary
When a non-escaping pointer is compared to a global value, the
comparison can be folded even if the corresponding malloc/allocation
call cannot be elided.
We need to make sure the global value is not null, since comparisons to
null cannot be folded.
In future, we should also handle cases when the the comparison
instruction dominates the pointer escape.
Reviewers: sanjoy
Subscribers s.egerton, llvm-commits
Differential Revision: http://reviews.llvm.org/D19549
llvm-svn: 268390
This patch changes the TargetMachine arguments to be const. This is
required for {D19265}, and was requested to be done in a separate patch.
Patch by Jacob Hansen!
Differential Revision: http://reviews.llvm.org/D19797
llvm-svn: 268389
Summary:
It's always zero for SelectionDAG and is never read by the MIPS backend so
do the same for FastISel.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: http://reviews.llvm.org/D19863
llvm-svn: 268386
Summary:
This is much closer to the way MIPS relocation expressions work
(%hi(foo + 2) rather than %hi(foo) + 2) and removes the need for the
various bodges in MipsAsmParser::evaluateRelocExpr().
Removing those bodges ensures that the constant stored in MCValue is the
full 32 or 64-bit (depending on ABI) offset from the symbol. This will be used
to correct the %hi/%lo matching needed to sort the relocation table correctly.
As part of this:
* Gave MCExpr::print() the ability to omit parenthesis when emitting a
symbol reference inside a MipsMCExpr operator like %hi(X). Without this
we print things like %lo(($L1)).
* %hi(%neg(%gprel(X))) is now three MipsMCExpr's instead of one. Most of
the related special cases have been removed or moved to MipsMCExpr. We
can remove the rest as we gain support for the less common relocations
when they are not part of this specific combination.
* Renamed MipsMCExpr::VariantKind and the enum prefix ('VK_') to avoid confusion
with MCSymbolRefExpr::VariantKind and its prefix (also 'VK_').
* fixup_Mips_GOT_Local and fixup_Mips_GOT_Global were found to be identical
and merged into fixup_Mips_GOT.
* MO_GOT16 and MO_GOT turned out to be identical and have been merged into
MO_GOT.
* VK_Mips_GOT and VK_Mips_GOT16 turned out to be the same thing so they
have been merged into MEK_GOT
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D19716
llvm-svn: 268379
A few benchmarks with lots of accesses to global variables in the hot
loops regressed a lot since r266399, which added the
SpeculativeExecution pass to the default pipeline. The problem is that
this pass doesn't mark Globals Alias Analysis as preserved. Globals
Alias Analysis is computed in a module pass, whereas
SpeculativeExecution is a function pass, and a lot of passes dependent
on the Globals Alias Analysis to optimize these benchmarks are also
function passes. As such, the Globals Alias Analysis information cannot
be recomputed between SpeculativeExecution and the following function
passes needing that information.
SpeculativeExecution doesn't invalidate Globals Alias Analysis, so mark
it as such to fix those performance regressions.
Differential Revision: http://reviews.llvm.org/D19806
llvm-svn: 268370
We were overly cautious in our analysis of loops which have invokes
which unwind to EH pads. The loop unroll transform is safe because it
only clones blocks in the loop body, it does not try to split critical
edges involving EH pads. Instead, move the necessary safety check to
LoopUnswitch.
N.B. The safety check for loop unswitch is covered by an existing test
which fails without it.
llvm-svn: 268357
This parses the TPI stream (stream 2) from the PDB file. This stream
contains some header information followed by a series of codeview records.
There is some additional complexity here in that alongside this stream of
codeview records is a serialized hash table in order to efficiently query
the types. We parse the necessary bookkeeping information to allow us to
reconstruct the hash table, but we do not actually construct it yet as
there are still a few things that need to be understood first.
Differential Revision: http://reviews.llvm.org/D19840
Reviewed By: ruiu, rnk
llvm-svn: 268343
We wish to re-use this from llvm-pdbdump, and it provides a nice
way to print structured data in scoped format that could prove
useful for many other dumping tools as well. Moving to support
and changing name to ScopedPrinter to better reflect its purpose.
llvm-svn: 268342
There is not point in importing a "weak" or a "linkonce" function
since we won't be able to inline it anyway.
We already had a targeted check for WeakAny, this is using the
same check on GlobalValue as the inline, i.e.
isMayBeOverriddenLinkage()
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 268341
Remove the AddPristinesAndCSRs parameters from
addLiveIns()/addLiveOuts().
We need to respect pristine registers after prologue epilogue insertion,
Seeing that we got this wrong in at least two commits already, we should
rather pay the small price to query MachineFrameInfo for it.
There are three cases that did not set AddPristineAndCSRs to true even
after register allocation:
- ExecutionDepsFix: live-out registers are used as a hint that the
register is used soon. This is not true for pristine registers so
use the new addLiveOutsNoPristines() to maintain this behaviour.
- SystemZShortenInst: Not setting AddPristineAndCSRs to true looks like
a bug, should do the right thing automatically now.
- StackMapLivenessAnalysis: Not adding pristine registers looks like a
bug to me. Added a FIXME comment but maintain the current behaviour
as a change may need to get coordinated with GC runtimes.
llvm-svn: 268336
Summary:
This adds a unique ID to the COFF section uniquing map, similar to the
one we have for ELF. The unique id is not currently exposed via the
assembler because we don't have a use case for it yet. Users generally
create .pdata with the .seh_* family of directives, and the assembler
internally needs to produce .pdata and .xdata sections corresponding to
the code section.
The association between .text sections and the assembler-created .xdata
and .pdata sections is maintained as an ID field of MCSectionCOFF. The
CFI-related sections are created with the given unique ID, so if more
code is added to the same text section, we can find and reuse the CFI
sections that were already created.
Reviewers: majnemer, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19376
llvm-svn: 268331
After the layout of the basic blocks is set, the target may be able to get rid
of unconditional branches to fallthrough blocks that the generic code does not
catch. This happens any time TargetInstrInfo::AnalyzeBranch is not able to
analyze all the branches involved in the terminators sequence, while still
understanding a few of them.
In such situation, AnalyzeBranch can directly modify the branches if it has been
instructed to do so.
This patch takes advantage of that.
llvm-svn: 268328
This operation may branch to the handler block and we do not want it
to happen anywhere within the basic block.
Moreover, by marking it "terminator and branch" the machine verifier
does not wrongly assume (because of AnalyzeBranch not knowing better)
the branch is analyzable. Indeed, the target was seeing only the
unconditional branch and not the faulting load op and thought it was
a simple unconditional block.
The machine verifier was complaining because of that and moreover,
other optimizations could have done wrong transformation!
In the process, simplify the representation of the handler block in
the faulting load op. Now, we directly reference the handler block
instead of using a label. This has the benefits of:
1. MC knows how to issue a label for a BB, so leave that to it.
2. Accessing the target BB from its label is painful, whereas it is
direct from a MBB operand.
Note: The 2 bytes offset in implicit-null-check.ll comes from the
fact the unconditional jumps are not removed anymore, as the whole
terminator sequence is not analyzable anymore.
Will fix it in a subsequence commit.
llvm-svn: 268327
Summary:
When SelectionDAG performs CSE it is possible that the context's source
location is different from that of the selected node. This can lead to
incorrect line number records. We update the debug location to the
one that occurs earlier in the instruction sequence.
This fixes PR21006.
Reviewers: echristo, sdmitrouk
Subscribers: jevinskie, asl, llvm-commits
Differential Revision: http://reviews.llvm.org/D12094
llvm-svn: 268323
There is not point in importing a "weak" or a "linkonce" function
since we won't be able to inline it anyway.
We already had a targeted check for WeakAny, this is using the
same check on GlobalValue as the inline, i.e.
isMayBeOverriddenLinkage()
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 268315
Produce another specific error message for a malformed Mach-O file when a symbol’s
section index is more than the number of sections. The existing test case in test/Object/macho-invalid.test
for macho-invalid-section-index-getSectionRawName now reports the error with the message indicating
that a symbol at a specific index has a bad section index and that bad section index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
"// TODO: Actually report errors helpfully" and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
llvm-svn: 268298
We were using v_readlane_b32 with the lane set to zero, but this won't
work if thread 0 is not active.
Differential Revision: http://reviews.llvm.org/D19745
llvm-svn: 268295
Now that unaligned access expansion should not attempt
to produce i64 accesses, we can remove the hack in
PreprocessISelDAG where this is done.
This allows splitting i64 private accesses while
allowing the new add nodes indexing the vector components
can be folded with the base pointer arithmetic.
llvm-svn: 268293
that it computes. Currently this is used for testing and precision
tuning, but it might be used by optimizations later.
Differential Revision: http://reviews.llvm.org/D19179
llvm-svn: 268291
Summary:
When we restore an SGPR value from scratch, we first load it into a
temporary VGPR and then use v_readlane_b32 to copy the value from the
VGPR back into an SGPR.
We weren't setting the kill flag on the VGPR in the v_readlane_b32
instruction, so the register scavenger wasn't able to re-use this
temp value later.
I wasn't able to create a lit test for this.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D19744
llvm-svn: 268287
We were negating an immediate that was going to be used in a SUBri form
unnecessarily. Since ADD/SUB are very similar we *can* do that, but we have to
change the SUB to an ADD at the same time. This also applies to ADD, and allows
us to handle a slightly larger range of immediates for those two operations.
rdar://25992245
llvm-svn: 268276
Summary:
We don't have sign-/zero-extending ldg/ldu instructions defined,
so we need to emulate them with explicit CVTs. We were originally
handling the i8 case, but not any other cases.
Fixes PR26185
Reviewers: jingyue, jlebar
Subscribers: jholewinski
Differential Revision: http://reviews.llvm.org/D19615
llvm-svn: 268272
Sanjay Patel