If the operation's type has been promoted during type legalization, we
need to account for the fact that the high bits of the comparison
operand are likely unspecified.
The LHS is usually zero-extended, but MIPS sign extends it, so we have
to be slightly careful.
Patch by Simon Dardis.
llvm-svn: 264296
After comdat processing, the symbols still go through regular symbol
resolution.
We were not doing it for linkonce symbols since they are lazy linked.
This fixes pr27044.
llvm-svn: 264288
Summary:
Some target lowerings of FP_TO_FP16, for instance ARM's vcvtb.f16.f32
instruction, do not guarantee that the top 16 bits are zeroed out.
Remove the unsafe AssertZext and add tests to exercise this.
Reviewers: jmolloy, sbaranga, kristof.beyls, aadg
Subscribers: llvm-commits, srhines, aemerson
Differential Revision: http://reviews.llvm.org/D18426
llvm-svn: 264285
This patch corresponds to review:
http://reviews.llvm.org/D17711
It disables direct moves on these operations in 32-bit mode since the patterns
assume 64-bit registers. The final patch is slightly different from the
Phabricator review as the bitcast operations needed to be disabled in 32-bit
mode as well. This fixes PR26617.
llvm-svn: 264282
This patch begins adding support for lowering to the XOP VPPERM instruction - adding the X86ISD::VPPERM opcode.
Differential Revision: http://reviews.llvm.org/D18189
llvm-svn: 264260
Summary:
In particular, make the cnMIPS predicates much more obvious and prefer
def ... : ... {
let Foo = bar;
}
over:
let Foo = bar in
def ... : ...;
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18354
llvm-svn: 264258
We used to only allow SCEVAddRecExpr for pointer expressions in order to
be able to compute the bounds. However this is also trivially possible
for loop-invariant addresses (scUnknown) since then the bounds are the
address itself.
Interestingly, we used allow this for the special case when the
loop-invariant address happens to also be an SCEVAddRecExpr (in an outer
loop).
There are a couple more loops that are vectorized in SPEC after this.
My guess is that the main reason we don't see more because for example a
loop-invariant load is vectorized into a splat vector with several
vector-inserts. This is likely to make the vectorization unprofitable.
I.e. we don't notice that a later LICM will move all of this out of the
loop so the cost estimate should really be 0.
llvm-svn: 264243
We need the "return address" of a noreturn call to be within the
bounds of the calling function; TrapUnreachable turns 'unreachable'
into a 'ud2' instruction, which has that desired effect.
Differential Revision: http://reviews.llvm.org/D18414
llvm-svn: 264224
If not for lazy linking of linkonce GVs, comdats are just a
preprocessing before symbol resolution.
Lazy linking complicates it since when we pick a visible member of
comdat, we have to make sure the rest of it passes symbol resolution
too.
llvm-svn: 264223
This is a temporary crutch to enable code that currently uses std::error_code
to be incrementally moved over to Error. Requiring all Error instances be
convertible enables clients to call errorToErrorCode on any error (not just
ECErrors created by conversion *from* an error_code).
This patch also moves code for Error from ErrorHandling.cpp into a new
Error.cpp file.
llvm-svn: 264221
The BumpPtrAllocator currently doesn't handle zero length allocations well.
The discussion for how to fix that is ongoing. However, there's no need
for StringRef::copy to actually allocate anything here anyway, so just
return StringRef() when we get a zero length copy.
Reviewed by David Blaikie
llvm-svn: 264201
Strengthen tests of storing frame indices.
Right now this just creates irrelevant scheduling changes.
We don't want to have multiple frame index operands
on an instruction. There seem to be various assumptions
that at least the same frame index will not appear twice
in the LocalStackSlotAllocation pass.
There's no reason to have this happen, and it just
makes it easy to introduce bugs where the immediate
offset is appplied to the storing instruction when it should
really be applied to the value being stored as a separate
add.
This might not be sufficient. It might still be problematic
to have an add fi, fi situation, but that's even less unlikely
to happen in real code.
llvm-svn: 264200
Currently, AnalyzeBranch() fails non-equality comparison between floating points
on X86 (see https://llvm.org/bugs/show_bug.cgi?id=23875). This is because this
function can modify the branch by reversing the conditional jump and removing
unconditional jump if there is a proper fall-through. However, in the case of
non-equality comparison between floating points, this can turn the branch
"unanalyzable". Consider the following case:
jne.BB1
jp.BB1
jmp.BB2
.BB1:
...
.BB2:
...
AnalyzeBranch() will reverse "jp .BB1" to "jnp .BB2" and then "jmp .BB2" will be
removed:
jne.BB1
jnp.BB2
.BB1:
...
.BB2:
...
However, AnalyzeBranch() cannot analyze this branch anymore as there are two
conditional jumps with different targets. This may disable some optimizations
like block-placement: in this case the fall-through behavior is enforced even if
the fall-through block is very cold, which is suboptimal.
Actually this optimization is also done in block-placement pass, which means we
can remove this optimization from AnalyzeBranch(). However, currently
X86::COND_NE_OR_P and X86::COND_NP_OR_E are not reversible: there is no defined
negation conditions for them.
In order to reverse them, this patch defines two new CondCode X86::COND_E_AND_NP
and X86::COND_P_AND_NE. It also defines how to synthesize instructions for them.
Here only the second conditional jump is reversed. This is valid as we only need
them to do this "unconditional jump removal" optimization.
Differential Revision: http://reviews.llvm.org/D11393
llvm-svn: 264199
The goal is to enhance this script to be used with opt and clang:
Group all of the regexes together, so it's easier to see what's going on.
This will make it easier to break main() up into pieces too.
Also, note that some of the regexes are for x86-specific asm.
llvm-svn: 264197
If a comdat is dropped, all symbols in it are dropped.
If a comdat is kept, the symbols survive to pass regular symbol
resolution.
With this patch we do that for all global symbols.
The added test is a copy of test/tools/gold/X86/comdat.ll that we now
pass.
llvm-svn: 264192
in the test suite. While this is not really an interesting tool and option to run
on a Mach-O file to show the symbol table in a generic libObject format
it shouldn’t crash.
The reason for the crash was in MachOObjectFile::getSymbolType() when it was
calling MachOObjectFile::getSymbolSection() without checking its return value
for the error case.
What makes this fix require a fair bit of diffs is that the method getSymbolType() is
in the class ObjectFile defined without an ErrorOr<> so I needed to add that all
the sub classes. And all of the uses needed to be updated and the return value
needed to be checked for the error case.
The MachOObjectFile version of getSymbolType() “can” get an error in trying to
come up with the libObject’s internal SymbolRef::Type when the Mach-O symbol
symbol type is an N_SECT type because the code is trying to select from the
SymbolRef::ST_Data or SymbolRef::ST_Function values for the SymbolRef::Type.
And it needs the Mach-O section to use isData() and isBSS to determine if
it will return SymbolRef::ST_Data.
One other possible fix I considered is to simply return SymbolRef::ST_Other
when MachOObjectFile::getSymbolSection() returned an error. But since in
the past when I did such changes that “ate an error in the libObject code” I
was asked instead to push the error out of the libObject code I chose not
to implement the fix this way.
As currently written both the COFF and ELF versions of getSymbolType()
can’t get an error. But if isReservedSectionNumber() wanted to check for
the two known negative values rather than allowing all negative values or
the code wanted to add the same check as in getSymbolAddress() to use
getSection() and check for the error then these versions of getSymbolType()
could return errors.
At the end of the day the error printed now is the generic “Invalid data was
encountered while parsing the file” for object_error::parse_failed. In the
future when we thread Lang’s new TypedError for recoverable error handling
though libObject this will improve. And where the added // Diagnostic(…
comment is, it would be changed to produce and error message
like “bad section index (42) for symbol at index 8” for this case.
llvm-svn: 264187
This should be hoisted further up so it can be used in DAGCombiner and other backends,
but I'm limiting the scope in the interest of patch minimalism.
It's not quite NFC because some of the replaced code was using an 'if' check rather
than a 'while' loop, so those cases would only look through a single bitcast.
llvm-svn: 264186
There are a few bugs in the walker that this patch addresses.
Primarily:
- Caching can break when we have multiple BBs without phis
- We weren't optimizing some phis properly
- Because of how the DFS iterator works, there were times where we
wouldn't cache any results of our DFS
I left the test cases with FIXMEs in, because I'm not sure how much
effort it will take to get those to work (read: We'll probably
ultimately have to end up redoing the walker, or we'll have to come up
with some creative caching tricks), and more test coverage = better.
Differential Revision: http://reviews.llvm.org/D18065
llvm-svn: 264180
Summary:
This changes the conversion functions from SCEV * to SCEVAddRecExpr from
ScalarEvolution and PredicatedScalarEvolution to return a SCEVAddRecExpr*
instead of a SCEV* (which removes the need of most clients to do a
dyn_cast right after calling these functions).
We also don't add new predicates if the transformation was not successful.
This is not entirely a NFC (as it can theoretically remove some predicates
from LAA when we have an unknown dependece), but I couldn't find an obvious
regression test for it.
Reviewers: sanjoy
Subscribers: sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18368
llvm-svn: 264161
If we can't handle a relocation type, report it as an error in the source,
rather than asserting. I've added a more descriptive message and a test for the
only cases of this that I've been able to trigger.
Differential Revision: http://reviews.llvm.org/D18388
llvm-svn: 264156
This is all horribly outdated, and is mostly about the autoconf build
system that doesn't even exist anymore. These questions aren't
frequent, and these answers aren't useful.
llvm-svn: 264141
Now that StatepointLoweringInfo represents base pointers, derived
pointers and gc relocates as SmallVectors and not ArrayRefs, we no
longer need to allocate "backing storage" on stack in LowerStatepoint.
So elide the backing storage, and inline the trivial body of
getIncomingStatepointGCValues.
llvm-svn: 264128
We can statically decide whether or not a register pressure set is for
SGPRs or VGPRs, so we don't need to re-compute this information in
SIRegisterInfo::getRegPressureSetLimit().
Differential Revision: http://reviews.llvm.org/D14805
llvm-svn: 264126
In retrospect, it seems "obvious" that the sense of the return code is
the same as if it crashed on "interesting" inputs. But that didn't stop
me from spending more time than I care to admit verifying this.
llvm-svn: 264119
MCContext shouldn't be accessing the filesystem - that's a gross
layering violation and makes it awkward to use as a library or in a
daemon where it may not even be allowed filesystem access.
The CWD lookup here is normally redundant anyway, since the calling
context either also looks up the CWD or sets this to something more
specific. Here, we fix up the one caller that doesn't already set up a
debug compilation dir and make it clear that the responsibility for
such set up is in the users of MCContext.
llvm-svn: 264109
Summary:
I've completed my audit of all the code that looks at noduplicate and
added handling of convergent where appropriate, so we no longer need
noduplicate on these intrinsics.
Reviewers: jholewinski
Subscribers: llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D18168
llvm-svn: 264107
A really unfortunate design of llvm-link and related libraries is that
they operate one module at a time.
This means they can copy a GV to the destination module that should not
be there in the final result because a later bitcode file takes
precedence.
We already handled cases like a strong GV replacing a weak for example.
One case that is not currently handled is a comdat replacing another.
This doesn't happen in ELF, but with COFF largest selection kind it is
possible.
In "llvm-link a.ll b.ll" if the selected comdat was from a.ll,
everything will work and we will not copy the comdat from b.ll.
But if we run "llvm-link b.ll a.ll", we fail to delete the already
copied comdat from b.ll. This patch fixes that.
llvm-svn: 264103
CGP modifies the domtree in some cases, so saying that it preserves the
domtree is a lie. We'll be able to selectively preserve it with the new
pass manager.
Differential Revision: http://reviews.llvm.org/D16893
llvm-svn: 264099
We were just completely ignoring the types when determining whether we could
safely emit a libcall as a tail call. This is clearly wrong.
Theoretically, we could dig deeper looking for incidental matches (much like
the generic code in Analysis.cpp does), but it's probably not worth it for the
few libcalls that exist.
llvm-svn: 264084
When you have multiple LCSSA (single-operand) PHIs that are converted
into two-operand PHIs due to versioning, only assert that the PHI
currently being converted has a single operand. I.e. we don't want to
check PHIs that were converted earlier in the loop.
Fixes PR27023.
Thanks to Karl-Johan Karlsson for the minimized testcase!
llvm-svn: 264081
Improve vector extension of vectors on hardware without dedicated VSEXT/VZEXT instructions.
We already convert these to SIGN_EXTEND_VECTOR_INREG/ZERO_EXTEND_VECTOR_INREG but can further improve this by using the legalizer instead of prematurely splitting into legal vectors in the combine as this only properly helps for lowering to VSEXT/VZEXT.
Removes a lot of unnecessary any_extend + mask pattern - (Fix for PR25718).
Reapplied with a fix for PR26953 (missing vector widening legalization).
Differential Revision: http://reviews.llvm.org/D17932
llvm-svn: 264062
Summary:
Also renamed li_simm7 to li16_imm since it's not a simm7 and has an unusual
encoding (it's a uimm7 except that 0x7f represents -1).
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18145
llvm-svn: 264056
Summary:
We can't check the error message for this one because there's another lw/sw
available that covers a larger range. We therefore check the transition
between the two sizes.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D18144
llvm-svn: 264054
It's a bug fix.
For rerolled loops SE trip count remains unchanged. It leads to incorrect work of the next passes.
My patch just resets SE info for rerolled loop forcing SE to re-evaluate it next time it requested.
I also added a verifier call in the exisitng test to be sure no invalid SE data remain. Without my fix this test would fail with -verify-scev.
Differential Revision: http://reviews.llvm.org/D18316
llvm-svn: 264051
Adding support for section names with special characters in them (e.g. "/").
GCC successfully compiles such section names.
This also fixes PR24520.
Differential Revision: http://reviews.llvm.org/D15678
llvm-svn: 264038
Summary:
After this change, deopt operand bundles can be lowered directly by
SelectionDAG into STATEPOINT instructions (which are then lowered to a
call or sequence of nop, with an associated __llvm_stackmaps entry0.
This obviates the need to round-trip deoptimization state through
gc.statepoint via RewriteStatepointsForGC.
Reviewers: reames, atrick, majnemer, JosephTremoulet, pgavlin
Subscribers: sanjoy, mcrosier, majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D18257
llvm-svn: 264015
Summary:
Without tree pruning clang has 2,667,552 points.
Wiht only dominators pruning: 1,515,586.
With both dominators & predominators pruning: 1,340,534.
Resubmit of r262103.
Differential Revision: http://reviews.llvm.org/D18341
llvm-svn: 264003
As noted in PR18355, this patch makes it clear that all cases with undef operands have been handled before further constant folding is attempted.
Differential Revision: http://reviews.llvm.org/D18305
llvm-svn: 263994
If we have a BB with only MemoryDefs, live-in calculations will ignore
it. This means we get results like this:
define void @foo(i8* %p) {
; 1 = MemoryDef(liveOnEntry)
store i8 0, i8* %p
br i1 undef, label %if.then, label %if.end
if.then:
; 2 = MemoryDef(1)
store i8 1, i8* %p
br label %if.end
if.end:
; 3 = MemoryDef(1)
store i8 2, i8* %p
ret void
}
...When there should be a MemoryPhi in the `if.end` BB.
This patch fixes that behavior.
llvm-svn: 263991
Summary:
Whole quad mode is already enabled for pixel shaders that compute
derivatives, but it must be suspended for instructions that cause a
shader to have side effects (i.e. stores and atomics).
This pass addresses the issue by storing the real (initial) live mask
in a register, masking EXEC before instructions that require exact
execution and (re-)enabling WQM where required.
This pass is run before register coalescing so that we can use
machine SSA for analysis.
The changes in this patch expose a problem with the second machine
scheduling pass: target independent instructions like COPY implicitly
use EXEC when they operate on VGPRs, but this fact is not encoded in
the MIR. This can lead to miscompilation because instructions are
moved past changes to EXEC.
This patch fixes the problem by adding use-implicit operands to
target independent instructions. Some general codegen passes are
relaxed to work with such implicit use operands.
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: MatzeB, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18162
llvm-svn: 263982
In executable and shared object ELF files, relocations in the file contain the final virtual address rather than section offset so this is adjusted to display section offset.
Differential revision: http://reviews.llvm.org/D15965
llvm-svn: 263971
Summary:
When control flow is implemented using the exec mask, the compiler will
insert branch instructions to skip over the masked section when exec is
zero if the section contains more than a certain number of instructions.
The previous code would only count instructions in successor blocks,
and this patch modifies the code to start counting instructions in all
blocks between the start and end of the branch.
Reviewers: nhaehnle, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18282
llvm-svn: 263969
This introduces a custom lowering for ISD::SETCCE (introduced in r253572)
that allows us to emit a short code sequence for 64-bit compares.
Before:
push {r7, lr}
cmp r0, r2
mov.w r0, #0
mov.w r12, #0
it hs
movhs r0, #1
cmp r1, r3
it ge
movge.w r12, #1
it eq
moveq r12, r0
cmp.w r12, #0
bne .LBB1_2
@ BB#1: @ %bb1
bl f
pop {r7, pc}
.LBB1_2: @ %bb2
bl g
pop {r7, pc}
After:
push {r7, lr}
subs r0, r0, r2
sbcs.w r0, r1, r3
bge .LBB1_2
@ BB#1: @ %bb1
bl f
pop {r7, pc}
.LBB1_2: @ %bb2
bl g
pop {r7, pc}
Saves around 80KB in Chromium's libchrome.so.
Some notes on this patch:
- I don't much like the ARMISD::BRCOND and ARMISD::CMOV combines I
introduced (nothing else needs them). However, they are necessary in
order to avoid poor codegen, and they seem similar to existing combines
in other backends (e.g. X86 combines (brcond (cmp (setcc Compare))) to
(brcond Compare)).
- No support for Thumb-1. This is in principle possible, but we'd need
to implement ARMISD::SUBE for Thumb-1.
Differential Revision: http://reviews.llvm.org/D15256
llvm-svn: 263962
Summary:
replaceCongruentIVs can break LCSSA when trying to replace IV increments
since it tries to replace all uses of a phi node with another phi node
while both of the phi nodes are not necessarily in the processed loop.
This will cause an assert in IndVars.
To fix this, we add a check to make sure that the replacement maintains
LCSSA.
Reviewers: sanjoy
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18266
llvm-svn: 263941
Summary:
extract_vector_elt can cause an implicit any_ext if the types don't
match. When processing the following pattern:
(and (extract_vector_elt (load ([non_ext|any_ext|zero_ext] V))), c)
DAGCombine was ignoring the possible extend, and sometimes removing
the AND even though it was required to maintain some of the bits
in the result to 0, resulting in a miscompile.
This change fixes the issue by limiting the transformation only to
cases where the extract_vector_elt doesn't perform the implicit
extend.
Reviewers: t.p.northover, jmolloy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18247
llvm-svn: 263935
Summary:
The old address space inference pass (NVPTXFavorNonGenericAddrSpaces) is unable
to convert the address space of a pointer induction variable. This patch adds a
new pass called NVPTXInferAddressSpaces that overcomes that limitation using a
fixed-point data-flow analysis (see the file header comments for details).
The new pass is experimental and not enabled by default. Users can turn
it on by setting the -nvptx-use-infer-addrspace flag of llc.
Reviewers: jholewinski, tra, jlebar
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D17965
llvm-svn: 263916
Improve computeZeroableShuffleElements to be able to peek through bitcasts to extract zero/undef values from BUILD_VECTOR nodes of different element sizes to the shuffle mask.
Differential Revision: http://reviews.llvm.org/D14261
llvm-svn: 263906
Summary: Also expose getters and setters in the C API, so that the change can be tested.
Reviewers: nhaehnle, axw, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18260
From: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
llvm-svn: 263886
The sinpi/cospi can be replaced with sincospi to remove unnecessary
computations. However, we need to make sure that the calls are within
the same function!
This fixes PR26993.
llvm-svn: 263875
MDString are uniqued in the Context on creation, hashing the
pointer is less expensive than hashing the String itself.
Reviewers: dexonsmith
Differential Revision: http://reviews.llvm.org/D16560
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263867
Summary:
This patch changes the computation of the hash key for DISubprogram to
be computed on a small subset of the fields. The hash is computed a
lot faster, but there might be more collision in the table.
However by carefully selecting the fields, colisions should be rare.
Using `opt` to load the IR for FastISelEmitter.cpp.o, with this patch:
- DISubprogram::getImpl() goes from 28ms to 15ms.
- DICompositeType::getImpl() goes from 6ms to 2ms
- DIDerivedType::getImpl() goes from 18 to 12ms
Reviewers: dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16571
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263866
Summary:
ThinLTO is relying on linkInModule to import selected function.
However a lot of "magic" was hidden in linkInModule and the IRMover,
who would rename and promote global variables on the fly.
This is moving to an approach where the steps are decoupled and the
client is reponsible to specify the list of globals to import.
As a consequence some test are changed because they were relying on
the previous behavior which was importing the definition of *every*
single global without control on the client side.
Now the burden is on the client to decide if a global has to be imported
or not.
Reviewers: tejohnson
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18122
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263863
On Rafael's suggestion!
(also fix a discrepancy between this error message format and the others)
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263860
We need to be careful on which registers can be explicitly handled
via copies. Prologue, Epilogue use physical registers and if one belongs
to the set of CSRsViaCopy, it will no longer be CSRed, since PEI overwrites
it after the explicit copies.
llvm-svn: 263857
Avoid modifying other modules in `AArch64PromoteConstant` when the
constant is `ConstantData` (a horrible accident, I'm sure, caught by an
experimental follow-up to r261464).
Previously, this walked through all the users of a constant, but that
reaches into other modules when the constant doesn't depend transitively
on a `GlobalValue`! Since we're walking instructions anyway, just
modify the instructions we actually see.
As a drive-by, instead of storing `Use` and getting the instructions
again via `Use::getUser()` (which is not a constantant time lookup),
store `std::pair<Instruction, unsigned>`. Besides being cheaper, this
makes it easier to drop use-lists form `ConstantData` in the future.
(I threw this in because I was touching all the code anyway.)
Because the patch completely changes the traversal logic, it looks
like a rewrite of the pass, but the core logic is all the same (or
should be, minus the out-of-module changes). In other words, there
should be NFC as long as the LLVMContext only has a single Module.
I didn't think of a good way to test this, but I hope to submit a patch
eventually that makes walking these use-lists illegal/impossible.
llvm-svn: 263853
While not strictly necessary, since we don't support large integer
types, this avoids bugs due to silent truncation from uint64_t to a
32-bit unsigned (e.g. DL.isLegalInteger(DL.getTypeSizeInBits(Ty) )
This fixes PR26972.
Differential Revision: http://reviews.llvm.org/D18258
llvm-svn: 263850
* Renamed to be camel case, consistent with other docs.
* Fixed non-ascii characters (this is what I get for writing docs on an iPad).
llvm-svn: 263840
The loop on IVOperand's incoming values assumes IVOperand to be an
induction variable on the loop over which `S Pred X` is invariant;
otherwise loop invariant incoming values to IVOperand are not guaranteed
to dominate the comparision.
This fixes PR26973.
llvm-svn: 263827
In the <DisplayString> of PointerIntPair , I cast the pointer to the actual type, so VS can leverage it while visualizing, not unlike the recent change to PointerUnion visualization.
In the expansion, the current code is casting to the incorrect type (wrong number of stars), so I fixed that as well.
llvm-svn: 263821
This patch adds unscaled loads and sign-extend loads to the TII
getMemOpBaseRegImmOfs API, which is used to control clustering in the MI
scheduler. This is done to create more opportunities for load pairing. I've
also added the scaled LDRSWui instruction, which was missing from the scaled
instructions. Finally, I've added support in shouldClusterLoads for clustering
adjacent sext and zext loads that too can be paired by the load/store optimizer.
Differential Revision: http://reviews.llvm.org/D18048
llvm-svn: 263819
Summary:
These dependencies would be used in the future to reduce the number
of instrumented blocks(http://reviews.llvm.org/rL262103)
This is submitted as a separate CL because of previous problems with
ARM.
Subscribers: aemerson
Differential Revision: http://reviews.llvm.org/D18227
llvm-svn: 263797
Summary:
Allow the selection of BUFFER_LOAD_FORMAT_x and _XY. Do this now before
the frontend patches land in Mesa. Eventually, we may want to automatically
reduce the size of loads at the LLVM IR level, which requires such overloads,
and in some cases Mesa can generate them directly.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18255
llvm-svn: 263792
Summary:
These intrinsics expose the BUFFER_ATOMIC_* instructions and will be used
by Mesa to implement atomics with buffer semantics. The intrinsic interface
matches that of buffer.load.format and buffer.store.format, except that the
GLC bit is not exposed (it is automatically deduced based on whether the
return value is used).
The change of hasSideEffects is required for TableGen to accept the pattern
that matches the intrinsic.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, rivanvx, llvm-commits
Differential Revision: http://reviews.llvm.org/D18151
llvm-svn: 263791
Summary:
We cannot easily deduce that an offset is in an SGPR, but the Mesa frontend
cannot easily make use of an explicit soffset parameter either. Furthermore,
it is likely that in the future, LLVM will be in a better position than the
frontend to choose an SGPR offset if possible.
Since there aren't any frontend uses of these intrinsics in upstream
repositories yet, I would like to take this opportunity to change the
intrinsic signatures to a single offset parameter, which is then selected
to immediate offsets or voffsets using a ComplexPattern.
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18218
llvm-svn: 263790
Now that the resolved path cache stores the StringRef's, its
best to just always cache the results, even when realpath isn't
used. This way we'll still avoid the StringMap hashing and lookup.
This also conveniently reorganises this code in a way I need for
a future patch.
llvm-svn: 263777
ResolvedPaths was storing std::string's as a cache. We would then take those strings and look them up in the internString pool to get a unique StringRef for each path.
This patch changes ResolvedPaths to store the StringRef pointing in to the internString pool itself. This way, when getResolvedPath returns a string, we know we have the StringRef we would find in the pool anyway. We can avoid the duplicate memory of the std::string's, and also the time from the lookup.
Unfortunately my profiles show no runtime change here, but it should still save memory allocations which is nice.
Reviewed by Frederic Riss.
Differential Revision: http://reviews.llvm.org/D18259
llvm-svn: 263774
Summary:
It can hurt performance to prefetch ahead too much. Be conservative for
now and don't prefetch ahead more than 3 iterations on Cyclone.
Reviewers: hfinkel
Subscribers: llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D17949
llvm-svn: 263772
Summary:
And use this TTI for Cyclone. As it was explained in the original RFC
(http://thread.gmane.org/gmane.comp.compilers.llvm.devel/92758), the HW
prefetcher work up to 2KB strides.
I am also adding tests for this and the previous change (D17943):
* Cyclone prefetching accesses with a large stride
* Cyclone not prefetching accesses with a small stride
* Generic Aarch64 subtarget not prefetching either
Reviewers: hfinkel
Subscribers: aemerson, rengolin, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D17945
llvm-svn: 263771
Summary:
This wires up the pass for Cyclone but keeps it off for now because we
need a few more TTIs.
The getPrefetchMinStride value is not very well tuned right now but it
works well with CFP2006/433.milc which motivated this.
Tests will be added as part of the upcoming large-stride prefetching
patch.
Reviewers: t.p.northover
Subscribers: llvm-commits, aemerson, hfinkel, rengolin
Differential Revision: http://reviews.llvm.org/D17943
llvm-svn: 263770
A virtual index of -1u indicates that the subprogram's virtual index is
unrepresentable (for example, when using the relative vtable ABI), so do
not emit a DW_AT_vtable_elem_location attribute for it.
Differential Revision: http://reviews.llvm.org/D18236
llvm-svn: 263765
MSVC as usual:
C:\Buildbot\Slave\llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast\llvm.src\include\llvm/ADT/STLExtras.h(120):
error C2100: illegal indirection
C:\Buildbot\Slave\llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast\llvm.src\include\llvm/IR/Instructions.h(3966):
note: see reference to class template instantiation
'llvm::mapped_iterator<llvm::User::op_iterator,llvm::CatchSwitchInst::DerefFnTy>'
being compiled
This reverts commit e091dd63f1f34e043748e28ad160d3bc17731168.
llvm-svn: 263760
For fcmp, major concern about the following 6 cases is NaN result. The
comparison result consists of 4 bits, indicating lt, eq, gt and un (unordered),
only one of which will be set. The result is generated by fcmpu
instruction. However, bc instruction only inspects one of the first 3
bits, so when un is set, bc instruction may jump to to an undesired
place.
More specifically, if we expect an unordered comparison and un is set, we
expect to always go to true branch; in such case UEQ, UGT and ULT still
give false, which are undesired; but UNE, UGE, ULE happen to give true,
since they are tested by inspecting !eq, !lt, !gt, respectively.
Similarly, for ordered comparison, when un is set, we always expect the
result to be false. In such case OGT, OLT and OEQ is good, since they are
actually testing GT, LT, and EQ respectively, which are false. OGE, OLE
and ONE are tested through !lt, !gt and !eq, and these are true.
llvm-svn: 263753
idiom.
Most LLVM tool code exits immediately when an error is encountered and prints an
error message to stderr. The ExitOnError class supports this by providing two
call operators - one for Errors, and one for Expected<T>s. Calls to code that
can return Errors (or Expected<T>s) can use these calls to bail out on error,
and otherwise continue as if the operation had succeeded. E.g.
Error foo();
Expected<int> bar();
int main(int argc, char *argv[]) {
ExitOnError ExitOnErr;
ExitOnErr.setBanner(std::string("Error in ") + argv[0] + ":");
// Exit if foo returns an error. No need to manually check error return.
ExitOnErr(foo());
// Exit if bar returns an error, otherwise unwrap the contained int and
// continue.
int X = ExitOnErr(bar());
// ...
return 0;
}
llvm-svn: 263749
Summary:
Use the new LoopVersioning facility (D16712) to add noalias metadata in
the vector loop if we versioned with memchecks. This can enable some
optimization opportunities further down the pipeline (see the included
test or the benchmark improvement quoted in D16712).
The test also covers the bug I had in the initial version in D16712.
The vectorizer did not previously use LoopVersioning. The reason is
that the vectorizer performs its transformations in single shot. It
creates an empty single-block vector loop that it then populates with
the widened, if-converted instructions. Thus creating an intermediate
versioned scalar loop seems wasteful.
So this patch (rather than bringing in LoopVersioning fully) adds a
special interface to LoopVersioning to allow the vectorizer to add
no-alias annotation while still performing its own versioning.
As the vectorizer propagates metadata from the instructions in the
original loop to the vector instructions we also check the pointer in
the original instruction and see if LoopVersioning can add no-alias
metadata based on the issued memchecks.
Reviewers: hfinkel, nadav, mzolotukhin
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D17191
llvm-svn: 263744
Summary:
If we decide to version a loop to benefit a transformation, it makes
sense to record the now non-aliasing accesses in the newly versioned
loop. This allows non-aliasing information to be used by subsequent
passes.
One example is 456.hmmer in SPECint2006 where after loop distribution,
we vectorize one of the newly distributed loops. To vectorize we
version this loop to fully disambiguate may-aliasing accesses. If we
add the noalias markers, we can use the same information in a later DSE
pass to eliminate some dead stores which amounts to ~25% of the
instructions of this hot memory-pipeline-bound loop. The overall
performance improves by 18% on our ARM64.
The scoped noalias annotation is added in LoopVersioning. The patch
then enables this for loop distribution. A follow-on patch will enable
it for the vectorizer. Eventually this should be run by default when
versioning the loop but first I'd like to get some feedback whether my
understanding and application of scoped noalias metadata is correct.
Essentially my approach was to have a separate alias domain for each
versioning of the loop. For example, if we first version in loop
distribution and then in vectorization of the distributed loops, we have
a different set of memchecks for each versioning. By keeping the scopes
in different domains they can conveniently be defined independently
since different alias domains don't affect each other.
As written, I also have a separate domain for each loop. This is not
necessary and we could save some metadata here by using the same domain
across the different loops. I don't think it's a big deal either way.
Probably the best is to review the tests first to see if I mapped this
problem correctly to scoped noalias markers. I have plenty of comments
in the tests.
Note that the interface is prepared for the vectorizer which needs the
annotateInstWithNoAlias API. The vectorizer does not use LoopVersioning
so we need a way to pass in the versioned instructions. This is also
why the maps have to become part of the object state.
Also currently, we only have an AA-aware DSE after the vectorizer if we
also run the LTO pipeline. Depending how widely this triggers we may
want to schedule a DSE toward the end of the regular pass pipeline.
Reviewers: hfinkel, nadav, ashutosh.nema
Subscribers: mssimpso, aemerson, llvm-commits, mcrosier
Differential Revision: http://reviews.llvm.org/D16712
llvm-svn: 263743
I hit a crash in the bitcode reader on some corrupt input where an
MDString had somehow been attached to an instruction instead of an
MDNode. This input is pretty bogus, but we shouldn't be crashing on bad
input here.
This change adds error handling in all of the places where we
currently have unchecked casts from Metadata to MDNode, which means
we'll error out instead of crashing for that sort of input.
Unfortunately, I don't have tests. Hitting this requires flipping bits
in the input bitcode, and committing corrupt binary files to catch
these cases is a bit too opaque and unmaintainable.
llvm-svn: 263742
Summary:
The multiprocessing.Queue.put() call can hang if we try queueing all the
tests before starting to take them out of the queue.
The current implementation hangs if tests exceed 2^^15, on Mac OS X.
This might happen with a ninja check-all if one has a bunch of llvm
projects.
Reviewers: delcypher, bkramer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17609
llvm-svn: 263731
Autogenerated from the corresponding assembler tests with a few FIXME added (will fix soon).
Differential Revision: http://reviews.llvm.org/D18249
llvm-svn: 263729
This patch prevents CTR loops optimization when using soft float operations
inside loop body. Soft float operations use function calls, but function
calls are not allowed inside CTR optimized loops.
Patch by Aleksandar Beserminji.
Differential Revision: http://reviews.llvm.org/D17600
llvm-svn: 263727
Summary:
MRI::eliminateFrameIndex can emit several instructions to do address
calculations; these can usually be stackified. Because instructions with
FI operands can have subsequent operands which may be expression trees,
find the top of the leftmost tree and insert the code before it, to keep
the LIFO property.
Also use stackified registers when writing back the SP value to memory
in the epilog; it's unnecessary because SP will not be used after the
epilog, and it results in better code.
Differential Revision: http://reviews.llvm.org/D18234
llvm-svn: 263725
Symmary:
ds_permute/ds_bpermute do not read memory so s_waitcnt is not needed.
Reviewers
arsenm, tstellarAMD
Subscribers
llvm-commits, arsenm
Differential Revision:
http://reviews.llvm.org/D18197
llvm-svn: 263720
Summary:
As explained by the comment, threads will typically see different values
returned by atomic instructions even if the arguments are equal.
Reviewers: arsenm, tstellarAMD
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18156
llvm-svn: 263719
We were being too aggressive in trying to combine a shuffle into a blend-with-zero pattern, often resulting in a endless loop of contrasting combines
This patch stops the combine if we already have a blend in place (means we miss some domain corrections)
llvm-svn: 263717
This is similar to D18133 where we allowed profile weights on select instructions.
This extends that change to also allow the 'unpredictable' attribute of branches to apply to selects.
A test to check that 'unpredictable' metadata is preserved when cloning instructions was checked in at:
http://reviews.llvm.org/rL263648
Differential Revision: http://reviews.llvm.org/D18220
llvm-svn: 263716
The two changes together weakened the test and caused a regression with division
handling in MSVC mode. They were applied to avoid an assertion being triggered
in the block frequency analysis. However, the underlying problem was simply
being masked rather than solved properly. Address the actual underlying problem
and revert the changes. Rather than analyze the cause of the assertion, the
division failure was assumed to be an overflow.
The underlying issue was a subtle bug in the BB construction in the emission of
the div-by-zero check (WIN__DBZCHK). We did not construct the proper successor
information in the basic blocks, nor did we update the PHIs associated with the
basic block when we split them. This would result in assertions being triggered
in the block frequency analysis pass.
Although the original tests are being removed, the tests themselves performed
very little in terms of validation but merely tested that we did not assert when
generating code. Update this with new tests that actually ensure that we do not
regress on the code generation.
llvm-svn: 263714
It might be hard to recognize a hexadecimal number without '0x' prefix.
Besides that '0x' prefix corresponds to GNU objdump behaviour.
Differential Revision: http://reviews.llvm.org/D18207
llvm-svn: 263705
That allows, for example, to print hex-formatted immediates using
llvm-objdump --print-imm-hex command line option.
Differential Revision: http://reviews.llvm.org/D18195
llvm-svn: 263704
Summary:
This should eliminate all occurrences of this within LLVMMipsAsmParser.
This patch is in response to http://reviews.llvm.org/D17983. I was unable
to reproduce the warnings on my machine so please advise if this fixes the
warnings.
Reviewers: ariccio, vkalintiris, dsanders
Subscribers: dblaikie, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18087
llvm-svn: 263703
The section alignment field was marked optional but not provided a
default value: initialize it with 0.
While we are here, ensure that the section alignment is plausible.
llvm-svn: 263692
This splits out the logic that maps the `"statepoint-id"` attribute into
the actual statepoint ID, and the `"statepoint-num-patch-bytes"`
attribute into the number of patchable bytes the statpeoint is lowered
into. The new home of this logic is in IR/Statepoint.cpp, and this
refactoring will support similar functionality when lowering calls with
deopt operand bundles in the future.
llvm-svn: 263685
The allocator here can still be a nullptr, but this atleast makes the
single caller which needed nullptr be explicit about it.
Note, lld started always passing a parameter here as of r263680. If
anything builds out of sync, that would be why errors may occur.
llvm-svn: 263681
In lld we allocate atoms on an allocator and so don't run their
destructors. This means we also shouldn't allocate memory inside
them without that also being on an allocator.
Reviewed by Lang Hames and Rafael Espindola.
llvm-svn: 263676
Summary: If TBAA is on an intrinsic and it gets upgraded and drops the TBAA we hit an odd assert. We should just upgrade the TBAA first because it doesn't have side-effects.
Reviewers: reames, apilipenko, manmanren
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18229
llvm-svn: 263673
Summary:
This is a step towards implementing "direct" lowering of calls and
invokes with deopt operand bundles into STATEPOINT nodes (as opposed to
having them mandatorily pass through RewriteStatepointsForGC, which is
the case today).
This change extracts out a `SelectionDAGBuilder::LowerAsStatepoint`
helper function that is able to lower a "statepoint like thing", and
uses it to lower `gc.statepoint` calls. This is an NFC now, but in a
later change we will use `LowerAsStatepoint` to directly lower calls and
invokes with operand bundles without going through an intermediate
`gc.statepoint` IR representation.
FYI: I expect `SelectionDAGBuilder::StatepointInfo` will evolve as I add
support for lowering non gc.statepoints, right now it is fairly tightly
coupled with an IR level `gc.statepoint`.
Reviewers: reames, pgavlin, JosephTremoulet
Subscribers: sanjoy, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18106
llvm-svn: 263671
I'm testing out a script that auto-generates the check lines.
It's 98% copied from utils/update_llc_test_checks.py.
If others think this is useful, please let me know.
llvm-svn: 263668
I'm testing out a script that auto-generates the check lines.
It's 98% copied from utils/update_llc_test_checks.py.
If others think this is useful, please let me know.
llvm-svn: 263667
- Rename getATOMIC to getSYNC, as llvm will soon be able to emit both
'__sync' libcalls and '__atomic' libcalls, and this function is for
the '__sync' ones.
- getInsertFencesForAtomic() has been replaced with
shouldInsertFencesForAtomic(Instruction), so that the decision can be
made per-instruction. This functionality will be used soon.
- emitLeadingFence/emitTrailingFence are no longer called if
shouldInsertFencesForAtomic returns false, and thus don't need to
check the condition themselves.
llvm-svn: 263665
SelectionDAGBuilder::populateCallLoweringInfo is now used instead of
SelectionDAGBuilder::lowerCallOperands. The populateCallLoweringInfo
interface is more composable in face of design changes like
http://reviews.llvm.org/D18106
llvm-svn: 263663
The swift frontend needs to be able to look up PGO function name
variables based on the original raw function name. That's because it's
not possible to create PGO function name variables while emitting swift
IR. Instead, we have to create the name variables while lowering swift
IR to llvm IR, at which point we fix up all calls to the increment
intrinsic to point to the right name variable.
llvm-svn: 263662
Summary:
Uniform loops where the branch leaving the loop is predicated on VCCNZ
must be skipped if EXEC = 0, otherwise they will be infinite.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18137
llvm-svn: 263658
Summary:
Fix LSRInstance::HoistInsertPosition() to check the original insert
position block first for a canonical insertion point that is dominated
by all inputs. This leads to SCEV being able to reuse more instructions
since it currently tracks the instructions it creates for reuse by
keeping a table of <Value, insert point> pairs.
Reviewers: atrick
Subscribers: mcrosier, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18001
llvm-svn: 263644
And emit an error if it fails.
This prevents illegal instructions from getting sent to the GPU, which
would potentially result in a hang.
This is a candidate for the stable branch(es).
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
llvm-svn: 263627
Fork off compatibility.ll for the 3.8 release. The *.bc file in this
commit was produced using a Release build of the release_38 branch.
llvm-svn: 263620
This patch introduces the Error classs for lightweight, structured,
recoverable error handling. It includes utilities for creating, manipulating
and handling errors. The scheme is similar to exceptions, in that errors are
described with user-defined types. Unlike exceptions however, errors are
represented as ordinary return types in the API (similar to the way
std::error_code is used).
For usage notes see the LLVM programmer's manual, and the Error.h header.
Usage examples can be found in unittests/Support/ErrorTest.cpp.
Many thanks to David Blaikie, Mehdi Amini, Kevin Enderby and others on the
llvm-dev and llvm-commits lists for lots of discussion and review.
llvm-svn: 263609
We can currently only match zeroable vector elements of the same size as the shuffle type - these tests demonstrate the problem and a solution will be shortly added in an updated D14261
llvm-svn: 263606
The latent bug that LLE exposed in the LoopVectorizer was resolved
(PR26952).
The pass can be disabled with -mllvm -enable-loop-load-elim=0
llvm-svn: 263595
There is something strange going on with debug info (.eh_frame_hdr)
disappearing when msan.module_ctor are placed in comdat sections.
Moving this functionality under flag, disabled by default.
llvm-svn: 263579
Annoyingly, ErrorOr allows to *not check* the error when things go
well. It will crash badly when there is an error though. It should
runtime assert when it is used without being checked!
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263577
Record all variable defs with a summary record to aid in building a
complete reference graph and locating constant variable defs to import.
llvm-svn: 263576
Summary: This change adds a PACKAGE_VENDOR variable. When set it makes the version output more closely resemble the clang version output.
Reviewers: aprantl, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18159
llvm-svn: 263566
This was a latent bug that got exposed by the change to add LoopSimplify
as a dependence to LoopLoadElimination. Since LoopInfo was corrupted
after LV, LoopSimplify mis-compiled nbench in the test-suite (more
details in the PR).
The problem was that when we create the blocks for predicated stores we
didn't add those to any loops.
The original testcase for store predication provides coverage for this
assuming we verify LI on the way out of LV.
Fixes PR26952.
llvm-svn: 263565
Summary:
Static LDS size is saved in MachineFunctionInfo::LDSSize,
We define a pseudo instruction with usesCustomInserter bit set. Then, in EmitInstrWithCustomInserter,
we replace this pseudo instruction with a mov of MachineFunctionInfo::LDSSize.
Reviewers:
arsenm
tstellarAMD
Subscribers
llvm-commits, arsenm
Differential Revision:
http://reviews.llvm.org/D18064
llvm-svn: 263563
The PE TLS directory contains information about where the TLS data
resides in the image, what functions should be executed when threads are
created, etc.
llvm-svn: 263537
Summary:
LLVMGetTargetDataLayout was removed from the C API,
and then TargetMachine.TargetData was removed. Later,
LLVMCreateTargetMachineData was added to the C API,
and we now expose this via the Go API.
Reviewers: deadalnix, pcc
Subscribers: cierniak, llvm-commits, axw
Differential Revision: http://reviews.llvm.org/D18173
llvm-svn: 263530
Since the static getGlobalIdentifier and getGUID methods are now called
for global values other than functions, reflect that by moving these
methods to the GlobalValue class.
llvm-svn: 263524
In some places, like InstCombine, we resize a DenseMap to fit the elements
we intend to put in it, then insert those elements (to avoid continual
reallocations as it grows). But .resize(foo) doesn't actually do what
people think; it resizes to foo buckets (which is really an
implementation detail the user of DenseMap probably shouldn't care about),
not the space required to fit foo elements. DenseMap grows if 3/4 of its
buckets are full, so this actually causes one forced reallocation every
time instead of avoiding a reallocation.
This patch makes .resize(foo) do the intuitive thing: it grows to the size
necessary to fit foo elements without new allocations.
Also include a test to verify that .resize() actually does what we think it
does.
llvm-svn: 263522
This patch adds support for the MachO .alt_entry assembly directive, and uses
it for global aliases with non-zero GEP offsets. The alt_entry flag indicates
that a symbol should be layed out immediately after the preceding symbol.
Conceptually it introduces an alternate entry point for a function or data
structure. E.g.:
safe_foo:
// check preconditions for foo
.alt_entry fast_foo
fast_foo:
// body of foo, can assume preconditions.
The .alt_entry flag is also implicitly set on assembly aliases of the form:
a = b + C
where C is a non-zero constant, since these have the same effect as an
alt_entry symbol: they introduce a label that cannot be moved relative to the
preceding one. Setting the alt_entry flag on aliases of this form fixes
http://llvm.org/PR25381.
llvm-svn: 263521
Instead of running an explicit loop over `gc.relocate` calls hanging off
of a `gc.statepoint`, assert the validity of the type of the value being
relocated in `visitRelocate`.
llvm-svn: 263516
`MCSymbolRefExpr` variant kind for TLSCALL is prefixed with
_ARM_ since this is how it was originally implemented.
The X86_64 version is exactly the same so there's no reason
to create a new variant, we can just rename the existing
one to be machine-independent.
This generalization is the first step to implement support
for GNU2 TLS dialect in MC.
Differential Revision: http://reviews.llvm.org/D18160
llvm-svn: 263515
(Resubmitting after fixing missing file issue)
With the changes in r263275, there are now more than just functions in
the summary. Completed the renaming of data structures (started in
r263275) to reflect the wider scope. In particular, changed the
FunctionIndex* data structures to ModuleIndex*, and renamed related
variables and comments. Also renamed the files to reflect the changes.
A companion clang patch will immediately succeed this patch to reflect
this renaming.
llvm-svn: 263513
Summary:
Specifically, when we perform runtime loop unrolling of a loop that
contains a convergent op, we can only unroll k times, where k divides
the loop trip multiple.
Without this change, we'll happily unroll e.g. the following loop
for (int i = 0; i < N; ++i) {
if (i == 0) convergent_op();
foo();
}
into
int i = 0;
if (N % 2 == 1) {
convergent_op();
foo();
++i;
}
for (; i < N - 1; i += 2) {
if (i == 0) convergent_op();
foo();
foo();
}.
This is unsafe, because we've just added a control-flow dependency to
the convergent op in the prelude.
In general, runtime unrolling loops that contain convergent ops is safe
only if we don't have emit a prelude, which occurs when the unroll count
divides the trip multiple.
Reviewers: resistor
Subscribers: llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D17526
llvm-svn: 263509
These types are defined in ELFFile, so in order to use them, you have
to write ELFFile<ELFT>::SomeType. But there seems to be no reason to have
ELFFile have these types. This patch allows you to write ELFT::SomeType
instead.
This simplifies libObject users.
This is an example: http://reviews.llvm.org/D18129http://reviews.llvm.org/D18130
llvm-svn: 263504
Summary: This now try to reorder instructions in order to help create the optimizable pattern.
Reviewers: craig.topper, spatel, dexonsmith, Prazek, chandlerc, joker.eph, majnemer
Differential Revision: http://reviews.llvm.org/D16523
llvm-svn: 263503
Summary:
This form was replaced by a form taking an instruction instead of opcode and
return type in r258391. After committing this change (and some depending,
follow-up changes) it turned out in the review thread to be controversial. The
discussion didn't come to a conclusion yet. I'm re-adding the old form to fix
the API regression and to provide a better base for discussion, possibly on
llvm-dev.
A difference to the original function is that it can't be called with GEPs
(similarly to how it was already the case for compares). In order to support
opaque pointers in the future, folding GEPs needs to be passed the source
element type, which is not possible with the current API.
Reviewers: dberlin, reames
Subscribers: dblaikie, eddyb
Differential Revision: http://reviews.llvm.org/D17901
llvm-svn: 263501
If anybody is actually using this, it probably doesn't do what they
think it does. This actually causes the dylib to *export* a
__cxa_atexit symbol, so anything that links it probably loses their
exit time destructors as well as disabling LLVM's.
This just removes the option entirely. If somebody does need this
behaviour we should figure out a more principled way to do it.
This is effectively a revert of r223805.
llvm-svn: 263498
Summary:
llvm-config --libs does not produce correct output since commit r260263
(llvm-config: Add preliminary Windows support) changed naming format of
the libraries. This patch updates llvm-config to recognize new naming
format and output correct linker flags.
Ref: https://llvm.org/bugs/show_bug.cgi?id=26581
Patch by Vedran Miletić
Reviewers: ehsan, rnk, pxli168
Subscribers: pxli168
Differential Revision: http://reviews.llvm.org/D17300
llvm-svn: 263497
Summary: There are places in MachineBlockPlacement where a worklist is filled in pretty much identical way. The code is duplicated. This refactor it so that the same code is used in both scenarii.
Reviewers: chandlerc, majnemer, rafael, MatzeB, escha, silvas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18077
llvm-svn: 263495
With the changes in r263275, there are now more than just functions in
the summary. Completed the renaming of data structures (started in
r263275) to reflect the wider scope. In particular, changed the
FunctionIndex* data structures to ModuleIndex*, and renamed related
variables and comments. Also renamed the files to reflect the changes.
A companion clang patch will immediately succeed this patch to reflect
this renaming.
llvm-svn: 263490
Summary:
This check was added in rL152620, and has started causing downstream warnings in Julia:
```
In file included from /home/tkelman/Julia/julia-0.5/src/codegen.cpp:22:0:
/home/tkelman/Julia/julia-0.5/usr/include/llvm/ExecutionEngine/JITEventListener.h:84:5: warning: "LLVM_USE_INTEL_JITEVENTS" is not defined [-Wundef]
#if LLVM_USE_INTEL_JITEVENTS
^
/home/tkelman/Julia/julia-0.5/usr/include/llvm/ExecutionEngine/JITEventListener.h💯5: warning: "LLVM_USE_OPROFILE" is not defined [-Wundef]
#if LLVM_USE_OPROFILE
^
```
Patch by Tony Kelman.
Reviewers: loladiro
Differential Revision: http://reviews.llvm.org/D17254
llvm-svn: 263487
As noted in:
https://llvm.org/bugs/show_bug.cgi?id=26636
This doesn't accomplish anything on its own. It's the first step towards preserving
and using branch weights with selects.
The next step would be to make sure we're propagating the info in all of the other
places where we create selects (SimplifyCFG, InstCombine, etc). I don't think there's
an easy fix to make this happen; we have to look at each transform individually to
determine how to correctly propagate the weights.
Along with that step, we need to then use the weights when making subsequent transform
decisions such as discussed in http://reviews.llvm.org/D16836.
The inliner test is independent but closely related. It verifies that metadata is
preserved when both branches and selects are cloned.
Differential Revision: http://reviews.llvm.org/D18133
llvm-svn: 263482
Summary:
Previously we had a notion of convergent functions but not of convergent
calls. This is insufficient to correctly analyze calls where the target
is unknown, e.g. indirect calls.
Now a call is convergent if it targets a known-convergent function, or
if it's explicitly marked as convergent. As usual, we can remove
convergent where we can prove that no convergent operations are
performed in the call.
Originally landed as r261544, then reverted in r261544 for (incidental)
build breakage. Re-landed here with no changes.
Reviewers: chandlerc, jingyue
Subscribers: llvm-commits, tra, jhen, hfinkel
Differential Revision: http://reviews.llvm.org/D17739
llvm-svn: 263481
Some instructions were missing isBranch, isCall, or isTerminator
flags. This didn't really affect code generation since most of
the affected patterns were used only for the AsmParser and/or
disassembler.
However, it could affect tools using the MC layer to disassemble
and parse binary code (e.g. via MCInstrDesc::mayAffectControlFlow).
llvm-svn: 263478
The bad behavior happens when we have a function with a long linear chain of
basic blocks, and have a live range spanning most of this chain, but with very
few uses.
Let say we have only 2 uses.
The Hopfield network is only seeded with two active blocks where the uses are,
and each iteration of the outer loop in `RAGreedy::growRegion()` only adds two
new nodes to the network due to the completely linear shape of the CFG.
Meanwhile, `SpillPlacer->iterate()` visits the whole set of discovered nodes,
which adds up to a quadratic algorithm.
This is an historical accident effect from r129188.
When the Hopfield network is expanding, most of the action is happening on the
frontier where new nodes are being added. The internal nodes in the network are
not likely to be flip-flopping much, or they will at least settle down very
quickly. This means that while `SpillPlacer->iterate()` is recomputing all the
nodes in the network, it is probably only the two frontier nodes that are
changing their output.
Instead of recomputing the whole network on each iteration, we can maintain a
SparseSet of nodes that need to be updated:
- `SpillPlacement::activate()` adds the node to the todo list.
- When a node changes value (i.e., `update()` returns true), its neighbors are
added to the todo list.
- `SpillPlacement::iterate()` only updates the nodes in the list.
The result of Hopfield iterations is not necessarily exact. It should converge
to a local minimum, but there is no guarantee that it will find a global
minimum. It is possible that updating nodes in a different order will cause us
to switch to a different local minimum. In other words, this is not NFC, but
although I saw a few runtime improvements and regressions when I benchmarked
this change, those were side effects and actually the performance change is in
the noise as expected.
Huge thanks to Jakob Stoklund Olesen <stoklund@2pi.dk> for his feedbacks,
guidance and time for the review.
llvm-svn: 263460
When the SP in not changed because of realignment/VLAs etc., we restore the SP
by using the previous value of SP and not the FP. Breaking the dependency will
help in cases when the epilog of a callee is close to the epilog of the caller;
for then "sub sp, fp, #" depends on the load restoring the FP in the epilog of
the callee.
http://reviews.llvm.org/D18060
Patch by Aditya Kumar and Evandro Menezes.
llvm-svn: 263458
Converting masked vector loads to regular vector loads for x86 AVX should always be a win.
I raised the legality issue of reading the extra memory bytes on llvm-dev. I did not see any
objections.
1. x86 already does this kind of optimization for multiple scalar loads -> vector load.
2. If other targets have the same flexibility, we could move this transform up to CGP or DAGCombiner.
Differential Revision: http://reviews.llvm.org/D18094
llvm-svn: 263446
Summary:
MIPSR6 introduces a class of branches called compact branches. Unlike the
traditional MIPS branches which have a delay slot, compact branches do not
have a delay slot. The instruction following the compact branch is only
executed if the branch is not taken and must not be a branch.
It works by generating compact branches for MIPS32R6 when the delay slot
filler cannot fill a delay slot. Then, inspecting the generated code for
forbidden slot hazards (a compact branch with an adjacent branch or other
CTI) and inserting nops to clear this hazard.
Patch by Simon Dardis.
Reviewers: vkalintiris, dsanders
Subscribers: MatzeB, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D16353
llvm-svn: 263444
Summary:
When multiple threads perform an atomic op with the same arguments, they
will usually see different return values.
Reviewers: arsenm, tstellarAMD
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18101
llvm-svn: 263440
Tim Northover