JIT doesn't use the MC back-end asm printer to emit labels that it uses, the
section for the MCSymbol is never set. And thus the MCSymbol for the EH label
isn't marked as "defined". Because of that, TidyLandingPads removes the needed
landing pads from the JIT output. This breaks EH for every JIT program.
This is a work-around for this limitation. We pass in the label locations
map. If the label has a non-zero value, then it was "emitted" by the JIT and
TidyLandingPads shouldn't remove that label.
A nicer solution would be to mark the MCSymbol as "used" by the JIT and not rely
upon the section being set to determine if it's defined or not.
llvm-svn: 101453
to LLVM IR changes with addr label weirdness. In the testcase, we
generate references to the two bb's when codegen'ing the first
function:
_test1: ## @test1
leaq Ltmp0(%rip), %rax
..
leaq Ltmp1(%rip), %rax
Then continue to codegen the second function where the blocks
get merged. We're now smart enough to emit both labels, producing
this code:
_test_fun: ## @test_fun
## BB#0: ## %entry
Ltmp1: ## Block address taken
Ltmp0:
## BB#1: ## %ret
movl $-1, %eax
ret
Rejoice.
llvm-svn: 98595
label is generated, but then the block is deleted. Since the
value is undefined, we just emit the label right after the entry
label of the function. It might matter that the label is in the
same section as the function was afterall.
llvm-svn: 98579
function, then the BB is RAUW'd before the definition is emitted. There
are still two cases not being handled, but this should improve us back to
the situation before I touched anything.
llvm-svn: 98566
an MCSymbol. Make the EH_LABEL MachineInstr hold its label
with an MCSymbol instead of ID. Fix a bug in MMI.cpp which
would return labels named "Label4" instead of "label4".
llvm-svn: 98463
instead of label ID's. This cleans up and regularizes a bunch
of code and makes way for future progress.
Unfortunately, this pointed out to me that JITDwarfEmitter.cpp
is largely copy and paste from DwarfException/MachineModuleInfo
and other places. This is very sad and disturbing. :(
One major change here is that TidyLandingPads moved from being
called in DwarfException::BeginFunction to being called in
DwarfException::EndFunction. There should not be any
functionality change from doing this, but I'm not an EH expert.
llvm-svn: 98459
and passing off ownership to AsmPrinter. Now MachineModuleInfo
creates it and owns it by value. This allows us to use MCSymbols
more consistently throughout the rest of the code generator, and
simplifies a bit of code. This also allows MachineFunction to
keep an MCContext reference handy, and cleans up the TargetRegistry
interfaces for AsmPrinters.
llvm-svn: 98450
This allows code gen and the exception table writer to cooperate to make sure
landing pads are associated with the correct invoke locations.
llvm-svn: 94726
This adds location info for all llvm_unreachable calls (which is a macro now) in
!NDEBUG builds.
In NDEBUG builds location info and the message is off (it only prints
"UREACHABLE executed").
llvm-svn: 75640
Make llvm_unreachable take an optional string, thus moving the cerr<< out of
line.
LLVM_UNREACHABLE is now a simple wrapper that makes the message go away for
NDEBUG builds.
llvm-svn: 75379
Move GetConstantStringInfo to lib/Analysis. Remove
string output routine from Constant. Update all
callers. Change debug intrinsic api slightly to
accomodate move of routine, these now return values
instead of strings.
This unbreaks llvm-gcc bootstrap.
llvm-svn: 52884
string output routine from Constant. Update all
callers. Change debug intrinsic api slightly to
accomodate move of routine, these now return values
instead of strings.
llvm-svn: 52748
review feedback.
-enable-eh is still accepted but doesn't do anything.
EH intrinsics use Dwarf EH if the target supports that,
and are handled by LowerInvoke otherwise.
The separation of the EH table and frame move data is,
I think, logically figured out, but either one still
causes full EH info to be generated (not sure how to
split the metadata correctly).
MachineModuleInfo::needsFrameInfo is no longer used and
is removed.
llvm-svn: 49064
Added ISD::DECLARE node type to represent llvm.dbg.declare intrinsic. Now the intrinsic calls are lowered into a SDNode and lives on through out the codegen passes.
For now, since all the debugging information recording is done at isel time, when a ISD::DECLARE node is selected, it has the side effect of also recording the variable. This is a short term solution that should be fixed in time.
llvm-svn: 46659
to know about calls that cannot throw ('nounwind'):
if such a call does throw for some reason then the
personality will terminate the program. The distinction
between an ordinary call and a nounwind call is that
an ordinary call gets an entry in the exception table
but a nounwind call does not. This patch sets up the
exception table appropriately. One oddity is that
I've chosen to bracket nounwind calls with labels (like
invokes) - the other choice would have been to bracket
ordinary calls with labels. While bracketing
ordinary calls is more natural (because bracketing
by labels would then correspond exactly to getting an
entry in the exception table), I didn't do it because
introducing labels impedes some optimizations and I'm
guessing that ordinary calls occur more often than
nounwind calls. This fixes the gcc filter2 eh test,
at least at -O0 (the inliner needs some tweaking at
higher optimization levels).
llvm-svn: 45197
labels are generated bracketing each call (not just
invokes). This is used to generate entries in
the exception table required by the C++ personality.
However it gets in the way of tail-merging. This
patch solves the problem by no longer placing labels
around ordinary calls. Instead we generate entries
in the exception table that cover every instruction
in the function that wasn't covered by an invoke
range (the range given by the labels around the invoke).
As an optimization, such entries are only generated for
parts of the function that contain a call, since for
the moment those are the only instructions that can
throw an exception [1]. As a happy consequence, we
now get a smaller exception table, since the same
region can cover many calls. While there, I also
implemented folding of invoke ranges - successive
ranges are merged when safe to do so. Finally, if
a selector contains only a cleanup, there's a special
shorthand for it - place a 0 in the call-site entry.
I implemented this while there. As a result, the
exception table output (excluding filters) is now
optimal - it cannot be made smaller [2]. The
problem with throw filters is that folding them
optimally is hard, and the benefit of folding them is
minimal.
[1] I tested that having trapping instructions (eg
divide by zero) in such a region doesn't cause trouble.
[2] It could be made smaller with the help of higher
layers, eg by having branch folding reorder basic blocks
ending in invokes with the same landing pad so they
follow each other. I don't know if this is worth doing.
llvm-svn: 41718
gcc exception handling: if an exception unwinds through
an invoke, then execution must branch to the invoke's
unwind target. We previously tried to enforce this by
appending a cleanup action to every selector, however
this does not always work correctly due to an optimization
in the C++ unwinding runtime: if only cleanups would be
run while unwinding an exception, then the program just
terminates without actually executing the cleanups, as
invoke semantics would require. I was hoping this
wouldn't be a problem, but in fact it turns out to be the
cause of all the remaining failures in the LLVM testsuite
(these also fail with -enable-correct-eh-support, so turning
on -enable-eh didn't make things worse!). Instead we need
to append a full-blown catch-all to the end of each
selector. The correct way of doing this depends on the
personality function, i.e. it is language dependent, so
can only be done by gcc. Thus this patch which generalizes
the eh.selector intrinsic so that it can handle all possible
kinds of action table entries (before it didn't accomodate
cleanups): now 0 indicates a cleanup, and filters have to be
specified using the number of type infos plus one rather than
the number of type infos. Related gcc patches will cause
Ada to pass a cleanup (0) to force the selector to always
fire, while C++ will use a C++ catch-all (null).
llvm-svn: 41484
This patch fills the last necessary bits to enable exceptions
handling in LLVM. Currently only on x86-32/linux.
In fact, this patch adds necessary intrinsics (and their lowering) which
represent really weird target-specific gcc builtins used inside unwinder.
After corresponding llvm-gcc patch will land (easy) exceptions should be
more or less workable. However, exceptions handling support should not be
thought as 'finished': I expect many small and not so small glitches
everywhere.
llvm-svn: 39855
exception handling table if we encounter it multiple
times. Filters could be folded harder than this, but
that would mean a lot more work for not much gain.
llvm-svn: 37908
(landing pad) when an exception unwinds through the call. This doesn't
quite match the way the dwarf unwinder works: by default it only jumps to
the landing pad if the catch or filter specification matches, and otherwise
it keeps on unwinding. There are two ways of specifying to the unwinder
that it should "always" (more on why there are quotes here later) jump to
the landing pad: follow the specification by a 0 typeid, or follow it by
the typeid for the NULL typeinfo. GCC does the first, and this patch makes
LLVM do the same as gcc. However there is a problem: the unwinder performs
optimizations based on C++ semantics (it only expects destructors to be
run if the 0 typeid fires - known as "cleanups"), meaning it assumes that no
exceptions will be raised and that the raised exception will be reraised
at the end of the cleanup code. So if someone writes their own LLVM code
using the exception intrinsics they will get a nasty surprise if they don't
follow these rules. The other possibility of using the typeid corresponding
to NULL (catch-all) causes the unwinder to make no assumptions, so this is
probably what we should use in the long-run. However since we are still
having trouble getting exception handling working properly, for the moment
it seems best to closely imitate GCC.
llvm-svn: 37399
simplifies the code in DwarfWriter, allows for multiple filters and
makes it trivial to specify filters accompanied by cleanups or catch-all
specifications (see next patch). What a deal! Patch blessed by Anton.
llvm-svn: 37398
functions. This partly fixes PR1414: now we're restricted only to one
personality function per eh frame, not per module. Further work on
"multiple personalities" topic needs representative example.
llvm-svn: 37018
1. Fix PR1380
2. Apply Duncan's patch from PR1410
3. Insert workaround for "one personality function per module" as noted in PR1414
4. Emit correct debug frames for x86/linux. This partly fixes DebugInfo/2006-11-06-StackTrace.cpp: stack trace is
shown correctly, but arguments for function on top of stack are displayed incorrectly.
llvm-svn: 37015
Bill Wendling