have pointer types, though in contrast to C pointer types, SCEV
addition is never implicitly scaled. This not only eliminates the
need for special code like IndVars' EliminatePointerRecurrence
and LSR's own GEP expansion code, it also does a better job because
it lets the normal optimizations handle pointer expressions just
like integer expressions.
Also, since LLVM IR GEPs can't directly index into multi-dimensional
VLAs, moving the GEP analysis out of client code and into the SCEV
framework makes it easier for clients to handle multi-dimensional
VLAs the same way as other arrays.
Some existing regression tests show improved optimization.
test/CodeGen/ARM/2007-03-13-InstrSched.ll in particular improved to
the point where if-conversion started kicking in; I turned it off
for this test to preserve the intent of the test.
llvm-svn: 69258
sext around sext(shorter IV + constant), using a
longer IV instead, when it can figure out the
add can't overflow. This comes up a lot in
subscripting; mainly affects 64 bit.
llvm-svn: 69123
to more accurately describe what it does. Expand its doxygen comment
to describe what the backedge-taken count is and how it differs
from the actual iteration count of the loop. Adjust names and
comments in associated code accordingly.
llvm-svn: 65382
trip counts that use signed comparisons. It's not obviously the best
approach for preserving trip count information, and at any rate there
isn't anything in the tree right now that makes use of that, so for
now always using zero-extensions is preferable.
llvm-svn: 65347
trip count value when the original loop iteration condition is
signed and the canonical induction variable won't undergo signed
overflow. This isn't required for correctness; it just preserves
more information about original loop iteration values.
Add a getTruncateOrSignExtend method to ScalarEvolution,
following getTruncateOrZeroExtend.
llvm-svn: 64918
are multiple IV's in a loop, some of them may under go signed
or unsigned wrapping even if the IV that's used in the loop
exit condition doesn't. Restrict sign-extension-elimination
and zero-extension-elimination to only those that operate on
the original loop-controlling IV.
llvm-svn: 64866
modified in a way that may effect the trip count calculation. Change
IndVars to use this method when it rewrites pointer or floating-point
induction variables instead of using a doInitialization method to
sneak these changes in before ScalarEvolution has a chance to see
the loop. This eliminates the need for LoopPass to depend on
ScalarEvolution.
llvm-svn: 64810
- Test for signed and unsigned wrapping conditions, instead of just
testing for non-negative induction ranges.
- Handle loops with GT comparisons, in addition to LT comparisons.
- Support more cases of induction variables that don't start at 0.
llvm-svn: 64532
loop induction on LP64 targets. When the induction variable is
used in addressing, IndVars now is usually able to inserst a
64-bit induction variable and eliminates the sign-extending cast.
This is also useful for code using C "short" types for
induction variables on targets with 32-bit addressing.
Inserting a wider induction variable is easy; the tricky part is
determining when trunc(sext(i)) expressions are no-ops. This
requires range analysis of the loop trip count. A common case is
when the original loop iteration starts at 0 and exits when the
induction variable is signed-less-than a fixed value; this case
is now handled.
This replaces IndVarSimplify's OptimizeCanonicalIVType. It was
doing the same optimization, but it was limited to loops with
constant trip counts, because it was running after the loop
rewrite, and the information about the original induction
variable is lost by that point.
Rename ScalarEvolution's executesAtLeastOnce to
isLoopGuardedByCond, generalize it to be able to test for
ICMP_NE conditions, and move it to be a public function so that
IndVars can use it.
llvm-svn: 64407
This allows SCEV users to effectively calculate trip count.
LSR later on transforms back integer IVs to floating point IVs
later on to avoid int-to-float casts inside the loop.
llvm-svn: 58625
LoopPass*.
- Although less precise, this means they can be used in clients
without RTTI (who would otherwise need to include LoopPass.h, which
eventually includes things using dynamic_cast). This was the
simplest solution that presented itself, but I am happy to use a
better one if available.
llvm-svn: 58010
deleteValueFromRecords and loosen the types to all it to accept
Value* instead of just Instruction*, since this is what
ScalarEvolution uses internally anyway. This allows more flexibility
for future uses.
llvm-svn: 37657
This created an ambiguity for expandInTy to decide when to use
sign-extension or zero-extension, but it turns out that most of its callers
don't actually need a type conversion, now that LLVM types don't have
explicit signedness. Drop expandInTy in favor of plain expand, and change
the few places that actually need a type conversion to do it themselves.
llvm-svn: 37591
would scan the entire loop body, then scan all users of instructions in the
loop, looking for users outside the loop. Now, since we know that the
loop is in LCSSA form, we know that any users outside the loop will be LCSSA
phi nodes. Just scan them.
This speeds up indvars significantly.
llvm-svn: 34898
the Transforms library. This reduces debug library size by 132 KB, debug
binary size by 376 KB, and reduces link time for llvm tools slightly.
llvm-svn: 33939
rename Type::getIntegralTypeMask to Type::getIntegerTypeMask.
This makes naming much more consistent. For example, there are now no longer any
instances of IntegerType that are not considered isInteger! :)
llvm-svn: 33225
Implement the arbitrary bit-width integer feature. The feature allows
integers of any bitwidth (up to 64) to be defined instead of just 1, 8,
16, 32, and 64 bit integers.
This change does several things:
1. Introduces a new Derived Type, IntegerType, to represent the number of
bits in an integer. The Type classes SubclassData field is used to
store the number of bits. This allows 2^23 bits in an integer type.
2. Removes the five integer Type::TypeID values for the 1, 8, 16, 32 and
64-bit integers. These are replaced with just IntegerType which is not
a primitive any more.
3. Adjust the rest of LLVM to account for this change.
Note that while this incremental change lays the foundation for arbitrary
bit-width integers, LLVM has not yet been converted to actually deal with
them in any significant way. Most optimization passes, for example, will
still only deal with the byte-width integer types. Future increments
will rectify this situation.
llvm-svn: 33113
This patch converts getPrimitiveSize to getPrimitiveSizeInBits where it is
appropriate to do so (comparison of integer primitive types).
llvm-svn: 33012
This patch replaces signed integer types with signless ones:
1. [US]Byte -> Int8
2. [U]Short -> Int16
3. [U]Int -> Int32
4. [U]Long -> Int64.
5. Removal of isSigned, isUnsigned, getSignedVersion, getUnsignedVersion
and other methods related to signedness. In a few places this warranted
identifying the signedness information from other sources.
llvm-svn: 32785
This patch removes the SetCC instructions and replaces them with the ICmp
and FCmp instructions. The SetCondInst instruction has been removed and
been replaced with ICmpInst and FCmpInst.
llvm-svn: 32751
The long awaited CAST patch. This introduces 12 new instructions into LLVM
to replace the cast instruction. Corresponding changes throughout LLVM are
provided. This passes llvm-test, llvm/test, and SPEC CPUINT2000 with the
exception of 175.vpr which fails only on a slight floating point output
difference.
llvm-svn: 31931
"LCSSA" phi node causes indvars to break dominance properties. This fixes
causes indvars to avoid inserting aggressive code in this case, instead
indvars should be fixed to be more aggressive in the face of lcssa phi's.
llvm-svn: 28850
pointer recurrences into expressions from this:
%P_addr.0.i.0 = phi sbyte* [ getelementptr ([8 x sbyte]* %.str_1, int 0, int 0), %entry ], [ %inc.0.i, %no_exit.i ]
%inc.0.i = getelementptr sbyte* %P_addr.0.i.0, int 1 ; <sbyte*> [#uses=2]
into this:
%inc.0.i = getelementptr sbyte* getelementptr ([8 x sbyte]* %.str_1, int 0, int 0), int %inc.0.i.rec
Actually create something nice, like this:
%inc.0.i = getelementptr [8 x sbyte]* %.str_1, int 0, int %inc.0.i.rec
llvm-svn: 16924
Move include/Config and include/Support into include/llvm/Config,
include/llvm/ADT and include/llvm/Support. From here on out, all LLVM
public header files must be under include/llvm/.
llvm-svn: 16137
loop. This eliminates the extra add from the previous case, but it's
not clear that this will be a performance win overall. Tommorows test
results will tell. :)
llvm-svn: 13103
Instead of producing code like this:
Loop:
X = phi 0, X2
...
X2 = X + 1
if (X != N-1) goto Loop
We now generate code that looks like this:
Loop:
X = phi 0, X2
...
X2 = X + 1
if (X2 != N) goto Loop
This has two big advantages:
1. The trip count of the loop is now explicit in the code, allowing
the direct implementation of Loop::getTripCount()
2. This reduces register pressure in the loop, and allows X and X2 to be
put into the same register.
As a consequence of the second point, the code we generate for loops went
from:
.LBB2: # no_exit.1
...
mov %EDI, %ESI
inc %EDI
cmp %ESI, 2
mov %ESI, %EDI
jne .LBB2 # PC rel: no_exit.1
To:
.LBB2: # no_exit.1
...
inc %ESI
cmp %ESI, 3
jne .LBB2 # PC rel: no_exit.1
... which has two fewer moves, and uses one less register.
llvm-svn: 12961
This also implements some new features for the indvars pass, including
linear function test replacement, exit value substitution, and it works with
a much more general class of induction variables and loops.
llvm-svn: 12620
* Renamed StatisticReporter.h/cpp to Statistic.h/cpp
* Broke constructor to take two const char * arguments instead of one, so
that indendation can be taken care of automatically.
* Sort the list by pass name when printing
* Make sure to print all statistics as a group, instead of randomly when
the statistics dtors are called.
* Updated ProgrammersManual with new semantics.
llvm-svn: 4002
methods
* Eliminate AnalysisID: Now it is just a typedef for const PassInfo*
* Simplify how AnalysisID's are initialized
* Eliminate Analysis/Writer.cpp/.h: incorporate printing functionality into
the analyses themselves.
llvm-svn: 3116
* Add new RegisterOpt/RegisterAnalysis templates for registering passes that
are to show up in opt or analyze
* Register Analyses now
* Change optimizations to use RegisterOpt instead of RegisterPass
* Add support for different "PassType's"
* Add new RegisterOpt/RegisterAnalysis templates for registering passes that
are to show up in opt or analyze
* Register Analyses now
* Change optimizations to use RegisterOpt instead of RegisterPass
* Remove getPassName implementations from various subclasses
llvm-svn: 3113
- Rename runOnMethod to runOnFunction
* Transform getAnalysisUsageInfo into getAnalysisUsage
- Method is now const
- It now takes one AnalysisUsage object to fill in instead of 3 vectors
to fill in
- Pass's now specify which other passes they _preserve_ not which ones
they modify (be conservative!)
- A pass can specify that it preserves all analyses (because it never
modifies the underlying program)
* s/Method/Function/g in other random places as well
llvm-svn: 2333
llvm/Support/CFG.h
* Make pred & succ iterators for intervals global functions
* Add #includes that are now neccesary because BasicBlock.h doesn't include
InstrTypes.h anymore
llvm-svn: 1750
Method::inst_* is now in llvm/Support/InstIterator.h
GraphTraits specializations for BasicBlock and Methods are now in llvm/Support/CFG.h
llvm-svn: 1746
Dan Gohman