Found it during work on LLD, it would crash on following
linker script:
SECTIONS { .foo : { *("*®") } }
That happens because ® has int value -82. And chars are used as
array index in code, and are signed by default.
Differential revision: https://reviews.llvm.org/D35891
llvm-svn: 309549
Summary:
Without any information about the called function, we cannot be sure
that it is safe to interchange loops which contain function calls. For
example there could be dependences that prevent interchanging between
accesses in the called function and the loops. Even functions without any
parameters could cause problems, as they could access memory using
global pointers.
For now, I think it is only safe to interchange loops with calls marked
as readnone.
With this patch, the LLVM test suite passes with `-O3 -mllvm
-enable-loopinterchange` and LoopInterchangeProfitability::isProfitable
returning true for all loops. check-llvm and check-clang also pass when
bootstrapped in a similar fashion, although only 3 loops got
interchanged.
Reviewers: karthikthecool, blitz.opensource, hfinkel, mcrosier, mkuper
Reviewed By: mcrosier
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D35489
llvm-svn: 309547
Added patterns to recognize AND 1 on the mask of a scalar masked
move is not needed since only the lower bit is relevant for the
instruction.
Differential Revision:
https://reviews.llvm.org/D35897
llvm-svn: 309546
Changed method names based on the discussion in https://reviews.llvm.org/D34986:
getInt64 -> selectI64Imm,
getInt64Count -> selectI64ImmInstrCount.
llvm-svn: 309541
Missed the resetting base address selections when going from a base
address version to zero base address for non-base-addressed entries.
llvm-svn: 309529
(from comments in the test)
Group ranges in a range list that apply to the same section and use a base
address selection entry to reduce the number of relocations to one reloc per
section per range list. DWARF5 debug_rnglist will be more efficient than this
in terms of relocations, but it's still better than one reloc per entry in a
range list.
This is an object/executable size tradeoff - shrinking objects, but growing
the linked executable. In one large binary tested, total object size (not just
debug info) shrank by 16%, entirely relocation entries. Linked executable
grew by 4%. This was with compressed debug info in the objects, uncompressed
in the linked executable. Without compression in the objects, the win would be
smaller (the growth of debug_ranges itself would be more significant).
llvm-svn: 309526
Use `llvm-objdump -dwarf=frames` to dump the .eh_frame to validate the
output textually rather than compare the binary output. This makes it
easier to see what is being checked. NFC.
llvm-svn: 309524
MS ignores the keyword "short" when used after a jc/jz instruction, LLVM ought to do the same.
Test: D35893
Differential Revision: https://reviews.llvm.org/D35892
llvm-svn: 309509
I was a bit lazy when I first implemented this & skipped the index
lookup - obviously for large files this becomes pretty crucial, so here
we go, do the index lookup. Speeds up large DWP symbolizing by... lots.
(20m -> 20s, actually, maybe more in a release build (that was a release
build without index lookup, compared to a debug/non-release build with
the index usage))
llvm-svn: 309507
If you've archived the DWP file somewhere it's probably useful to be
able to just tell llvm-symbolizer where it is when you're symbolizing
stack traces from the binary.
This only provides a mechanism for specifying a single DWP file, good if
you're symbolizing a program with a single DWP file, but it's likely if
the program is dynamically linked that you might have a DWP for each
dynamic library - in which case this feature won't help (at least as
it's surfaced in llvm-symbolizer for now) - in theory it could be
extended to specify a collection of DWP files that could all be
consulted for split CU hash resolution.
llvm-svn: 309498
Summary:
Most CPUs implementing AES fusion require instruction pairs of the form
AESE Vn, _
AESMC Vn, Vn
and
AESD Vn, _
AESIMC Vn, Vn
The constraint is added to AES(I)MC instructions which use the result of
an AES(E|D) instruction by using AES(I)MCTrr pseudo instructions, which
constraint source and destination registers to be the same.
A nice side effect of this change is that now all possible pairs are
scheduled back-to-back on the exynos-m1 for the misched-fusion-aes.ll
test case.
I had to update aes_load_store. The version I added initially was very
reduced and with the new constraint, AESE/AESMC could not be scheduled
back-to-back. I updated the test to be more realistic and still expose
the same scheduling problem as the initial test case.
Reviewers: t.p.northover, rengolin, evandro, kristof.beyls, silviu.baranga
Reviewed By: t.p.northover, evandro
Subscribers: aemerson, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D35299
llvm-svn: 309495
Summary:
This change gives a 0.25% speedup on execution time, a 0.82% improvement
in benchmark scores and a 0.20% increase in binary size on a Cortex-A53.
These numbers are the geomean results on a wide range of benchmarks from
the test-suite and a range of proprietary suites.
Reviewers: t.p.northover, aadg, silviu.baranga, mcrosier, rengolin
Reviewed By: rengolin
Subscribers: grimar, davide, aemerson, rengolin, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D35568
llvm-svn: 309494
Rather than passing along most of the parameters, pass a reference to
the MCDWARFrameInfo instead. This makes it easier to pass additional
information about the frame to the checks. We need to keep the extra
constructor for the Key around to allow the construction of the null and
tombstone keys. NFC.
llvm-svn: 309493
If the return column is different, we cannot coalesce the CIE across the
FDEs. Add that to the key calculation. This ensures that we emit a
separate CIE.
llvm-svn: 309492
move test/Transforms/SimplifyCFG/disable-lookup-table.ll into test/Transforms/SimplifyCFG/X86/disable-lookup-table.ll to avoid test failure when X86 backend is not enabled
llvm-svn: 309487
This patch is in 2 parts:
1 - replace combineBT's use of SimplifyDemandedBits (hasOneUse only) with SelectionDAG::GetDemandedBits to more aggressively determine the lower bits used by BT.
2 - update SelectionDAG::GetDemandedBits to support ANY_EXTEND - if the demanded bits are only in the non-extended portion, then peek through and demand from the source value and then ANY_EXTEND that if we found a match.
Differential Revision: https://reviews.llvm.org/D35896
llvm-svn: 309486
Detect [/-][DU]NDEBUG in CMAKE_C_FLAGS* and pass them through to ocamlc.
This is necessary because their value might affect visibility of dump
functions in LLVM and ocamlc uses its own compiler and flags by default.
Differential Revision: https://reviews.llvm.org/D35898
llvm-svn: 309483
Install the OCaml dynamic libraries in the 'stubdirs' directory rather
than the llvm subdirectory in order to fix running executables created
by ocamlc. Otherwise, the executables fail to run being unable to locate
the libraries (unless the LLVM directory is explicitly added to
LD_LIBRARY_PATH).
The staging directories are not altered since they work for our
development setup anyway, and installing into two directories would
unnecessarily make the code more complex.
Differential Revision: https://reviews.llvm.org/D35995
llvm-svn: 309481
Summary:
Now that SamplePGOSupport is part of PGOOpt, there are several places that need tweaking:
1. AddDiscriminator pass should *not* be invoked at ThinLTOBackend (as it's already invoked in the PreLink phase)
2. addPGOInstrPasses should only be invoked when either ProfileGenFile or ProfileUseFile is non-empty.
3. SampleProfileLoaderPass should only be invoked when SampleProfileFile is non-empty.
4. PGOIndirectCallPromotion should only be invoked in ProfileUse phase, or in ThinLTOBackend of SamplePGO.
Reviewers: chandlerc, tejohnson, davidxl
Reviewed By: chandlerc
Subscribers: sanjoy, mehdi_amini, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D36040
llvm-svn: 309478
This commit
- Removes IsTailCall and replaces it with a target-defined unsigned
- Refactors getOutliningCallOverhead and getOutliningFrameOverhead so that they don't use IsTailCall
- Adds a call class + frame class classification to OutlinedFunction and Candidate respectively
This accomplishes a couple things.
Firstly, we don't need the notion of *tail call* in the general outlining algorithm.
Secondly, we now can have different "outlining classes" for each candidate within a set of candidates.
This will make it easy to add new ways to outline sequences for certain targets and dynamically choose
an appropriate cost model for a sequence depending on the context that that sequence lives in.
Ultimately, this should get us closer to being able to do something like, say avoid saving the link
register when outlining AArch64 instructions.
llvm-svn: 309475
Traceback (most recent call last):
File "llvm/utils/lit/tests/Inputs/shtest-format/external_shell/write-bad-encoding.py", line 5, in <module>
sys.stdout.write(b"a line with bad encoding: \xc2.")
sys.stdout.write doesn't accept bytes but sys.stdout.buffer.write accepts.
llvm-svn: 309473
Also refine the flat check to respect flat-for-global feature,
and constant fallback should check global handling, not
specifically MUBUF.
llvm-svn: 309471
NAKAMURA Takumi