Nest-var, OMP_NESTED, omp_set_nested()., and omp_get_nested() have been
deprecated in the 5.0 spec. Initial nesting info is now derived from
OMP_MAX_ACTIVE_LEVELS, OMP_NUM_THREADS, and OMP_PROC_BIND.
This patch deprecates the internal ICV that corresponds to nest-var, and
replaces it with the max-active-levels-var ICV to determine nesting. The
change still allows for use of OMP_NESTED (according to 5.0 changes),
omp_get_nested, and omp_set_nested, which have had deprecation messages
added to them. The change allows certain settings of OMP_NUM_THREADS,
OMP_PROC_BIND, and OMP_MAX_ACTIVE_LEVELS to turn on nesting, but
OMP_NESTED=0 will still force nesting to be off.
The runtime now prints informative messages about deprecation of
OMP_NESTED, omp_set_nested(), and omp_get_nested(), when those
environment variables or routines are used. It also prints deprecated
message in output for KMP_SETTINGS and OMP_DISPLAY_ENV for OMP_NESTED.
This patch also fixes OMP_DISPLAY_ENV output for OMP_TARGET_OFFLOAD.
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D58408
llvm-svn: 355138
This patch cleans up the yielding code and makes it optional. An
environment variable, KMP_USE_YIELD, was added. Yielding is still
on by default (KMP_USE_YIELD=1), but can be turned off completely
(KMP_USE_YIELD=0), or turned on only when oversubscription is detected
(KMP_USE_YIELD=2). Note that oversubscription cannot always be detected
by the runtime (for example, when the runtime is initialized and the
process forks, oversubscription cannot be detected currently over
multiple instances of the runtime).
Because yielding can be controlled by user now, the library mode
settings (from KMP_LIBRARY) for throughput and turnaround have been
adjusted by altering blocktime, unless that was also explicitly set.
In the original code, there were a number of places where a double yield
might have been done under oversubscription. This version checks
oversubscription and if that's not going to yield, then it does
the spin check.
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D58148
llvm-svn: 355120
Summary:
This patch adds a more sophisticated team reduction scheme to the OpenMP libomptarget-nvptx runtime.
The scheme uses a fixed size global memory buffer whose length can be adjusted via compiler flag:
```
-fopenmp-cuda-teams-reduction-recs-num=1024
```
The global buffer is a structure of arrays (with default size of 1024 each and controlled by the above flag), one array for each reduction variable.
Values in the buffer are processed by the last team to finish executing the body of the target region.
In addition to adding support for the new flag, the compiler also emits special functions used for the reduction of the intermediate reduction values. These changes will be added in a separate compiler patch following this one.
Reviewers: ABataev, caomhin
Reviewed By: ABataev
Subscribers: guansong, jfb, jdoerfert, openmp-commits
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D58409
llvm-svn: 354471
This patch adds the new 5.0 API function omp_get_supported_active_levels().
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D58211
llvm-svn: 354368
Remove fatal error messages from the cancellation API for GOMP
Add __kmp_barrier_gomp_cancel() to implement cancellation of parallel regions.
This new function uses the linear barrier algorithm with a cancellable
nonsleepable wait loop.
Differential Revision: https://reviews.llvm.org/D57969
llvm-svn: 354367
The thread-limit-var and omp_get_thread_limit API was not perfectly handled for
teams construct. Now, when modified by thread_limit clause, omp_get_thread_limit
reports the correct value. In addition, the value is restored when leaving the
teams construct to what it was in the encountering context.
This is done partly by creating the notion of a Contention Group root (CG root)
that keeps track of the thread at the root of each separate CG, the
thread-limit-var associated with the CG, and associated counter of active
threads within the contention group.
thread-limits are passed from master to worker threads via an entry in the ICV
data structure. When a "contention group switch" occurs, a new CG root record is
made and passed from master to worker. A thread could potentially have several
CG root records if it encounters multiple nested teams constructs (but at the
moment the spec doesn't allow for nested teams, so the most one could have
currently is 2). The master of the teams masters gets the thread-limit clause
value stored to its local ICV structure, and the other teams masters copy it
from the master. The thread-limit is set from that ICV copy and restored to the
ICV copy when entering and leaving the teams construct.
This change also fixes a bug when the top-level teams construct team gets
reused, and OMP_DYNAMIC was true, which can cause the expected size of this team
to be smaller than what was actually allocated. The fix updates the size of the
team after its threads were reserved.
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D56804
llvm-svn: 353747
%s refers to the test file in the source tree. This was accidentally added in
r351197 / 2b46d30 ("[OMPT] Second chunk of final OMPT 5.0 interface updates").
Differential Revision: https://reviews.llvm.org/D58002
llvm-svn: 353715
Summary:
As @david2050 commented, changes introduced by https://reviews.llvm.org/D56397 break builds for older compilers
which don't support `__has(_cpp)_attribute`. This is a fix for the break.
Reviewers: protze.joachim, jlpeyton, AndreyChurbanov, Hahnfeld, david2050
Subscribers: openmp-commits, david2050
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D57851
llvm-svn: 353538
The three switch fallthrough generate a warning with -Wimplicit-fallthrough.
Two are documented as fallthrough, one is not, but I think the intention is to also fallthrough in kmp_tasking.cpp.
Not sure whether kmp.h is the best place to define the macro.
Reviewers: jlpeyton, AndreyChurbanov, Hahnfeld
Reviewed By: jlpeyton
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D56397
llvm-svn: 353052
Redo after revert by hans. The wrong include in one test is fixed.
Make sure that OMPT is enabled in runtime entry points that access internals
of the runtime. Else, return an appropiate value indicating an error or that
the data is not available.
Patch provided by @sconvent
Reviewers: jlpeyton, omalyshe, hbae, Hahnfeld, joachim.protze
Reviewed By: joachim.protze
Tags: #openmp, #ompt
Differential Revision: https://reviews.llvm.org/D47717
llvm-svn: 352611
This fixes most references to the paths:
llvm.org/svn/
llvm.org/git/
llvm.org/viewvc/
github.com/llvm-mirror/
github.com/llvm-project/
reviews.llvm.org/diffusion/
to instead point to https://github.com/llvm/llvm-project.
This is *not* a trivial substitution, because additionally, all the
checkout instructions had to be migrated to instruct users on how to
use the monorepo layout, setting LLVM_ENABLE_PROJECTS instead of
checking out various projects into various subdirectories.
I've attempted to not change any scripts here, only documentation. The
scripts will have to be addressed separately.
Additionally, I've deleted one document which appeared to be outdated
and unneeded:
lldb/docs/building-with-debug-llvm.txt
Differential Revision: https://reviews.llvm.org/D57330
llvm-svn: 352514
As the codebase is now under the Apache 2.0 license with LLVM
Exceptions, and all Arm's contributions, past or future, are under that
new license, this Arm specific words in LICENSE.txt are no longer
needed.
llvm-svn: 352377
all missed!
Thanks to Alex Bradbury for pointing this out, and the fact that I never
added the intended `legacy` anchor to the developer policy. Add that
anchor too. With hope, this will cause the links to all resolve
successfully.
llvm-svn: 351731
to reflect the new license. These used slightly different spellings that
defeated my regular expressions.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351648
This installs the new developer policy and moves all of the license
files across all LLVM projects in the monorepo to the new license
structure. The remaining projects will be moved independently.
Note that I've left odd formatting and other idiosyncracies of the
legacy license structure text alone to make the diff easier to read.
Critically, note that we do not in any case *remove* the old license
notice or terms, as that remains necessary until we finish the
relicensing process.
I've updated a few license files that refer to the LLVM license to
instead simply refer generically to whatever license the LLVM project is
under, basically trying to minimize confusion.
This is really the culmination of so many people. Chris led the
community discussions, drafted the policy update and organized the
multi-year string of meeting between lawyers across the community to
figure out the strategy. Numerous lawyers at companies in the community
spent their time figuring out initial answers, and then the Foundation's
lawyer Heather Meeker has done *so* much to help refine and get us ready
here. I could keep going on, but I just want to make sure everyone
realizes what a huge community effort this has been from the begining.
Differential Revision: https://reviews.llvm.org/D56897
llvm-svn: 351631
and also the follow-up r351315.
The new test is failing on the buildbots.
> Make sure that OMPT is enabled in runtime entry points that access internals
> of the runtime. Else, return an appropiate value indicating an error or that
> the data is not available.
>
> Patch provided by @sconvent
>
> Reviewers: jlpeyton, omalyshe, hbae, Hahnfeld, joachim.protze
>
> Reviewed By: joachim.protze
>
> Tags: #openmp, #ompt
>
> Differential Revision: https://reviews.llvm.org/D47717
llvm-svn: 351431
Add omp_pause_resource and omp_pause_resource_all API and enum, plus stub for
internal implementation. Implemented callable helper function to do local pause,
and added basic functionality for hard and soft pause.
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D55078
llvm-svn: 351372
The compiler warns about an unused variable/statement:
runtime/src/kmp_affinity.cpp:4958:18: warning: statement has no effect [-Wunused-value]
KA_TRACE(1000, ; {
^
runtime/src/kmp_debug.h:84:24: note: in definition of macro 'KA_TRACE'
__kmp_debug_printf x; \
^
Instead of the unused reference to this function, this patch now calls the function
with an empty string. The call to this function should have no effect.
Patch provided by joachim.protze
Reviewers: jlpeyton, hbae, AndreyChurbanov
Reviewed By: AndreyChurbanov
Tags: #openmp, #ompt
Differential Revision: https://reviews.llvm.org/D56775
llvm-svn: 351323
Make sure that OMPT is enabled in runtime entry points that access internals
of the runtime. Else, return an appropiate value indicating an error or that
the data is not available.
Patch provided by @sconvent
Reviewers: jlpeyton, omalyshe, hbae, Hahnfeld, joachim.protze
Reviewed By: joachim.protze
Tags: #openmp, #ompt
Differential Revision: https://reviews.llvm.org/D47717
llvm-svn: 351311
Using proc_bind clause on a nested #pragma omp parallel region
with KMP_AFFINITY set causes an assertion error. This assertion occurs because
the place-partition-var is not properly initialized in the nested master threads.
Trying to get an intuitive result with KMP_AFFINITY + proc_bind is difficult
because of how the KMP_AFFINITY gtid-to-place mapping occurs. This
patch creates an initial place list no matter what affinity mechanism is used.
For KMP_AFFINITY, the place-partition-var is initialized to all the places.
Differential Revision: https://reviews.llvm.org/D55795
llvm-svn: 351227
This change fixes the sanity issue reported in Bug 40042.
Lock function definitions for the three lock kinds were added
to disambiguate calls to the lock functions done directly and indirectly.
Bugzilla: https://bugs.llvm.org/show_bug.cgi?id=40042
Patch by Hansang Bae
Differential Revision: https://reviews.llvm.org/D56103
llvm-svn: 351224
Fix ninja build detect test compiler failed under windows.
Patch by Peiyuan Song
Differential Revision: https://reviews.llvm.org/D53479
llvm-svn: 351223
Make __ompt_implicit_task_end a static function and remove the inline part. Remove
pId variable that is unused. This fixes small regression in SPEC kdtree benchmark.
Also reformat some of __ompt_implicit_task_end.
Differential Revision: https://reviews.llvm.org/D55788
llvm-svn: 351221
The omp-tools.h file is generated from the OpenMP spec to ensure that the interface
is implemented as specified.
The other changes are necessary to update the interface implementation to the
final version as published in 5.0.
The omp-tools.h header was previously called ompt.h, currently a copy under this name
is installed for legacy tools.
Patch partially perpared by @sconvent
Reviewers: AndreyChurbanov, hbae, Hahnfeld
Reviewed By: hbae
Tags: #openmp, #ompt
Differential Revision: https://reviews.llvm.org/D55579
llvm-svn: 351197
Summary:
Two things:
1. Those two variables had the wrong sigdness, which was resulting in "sign mismatch in comparison" warning.
2. The whole `kmp_debugger.cpp` wasn't being built, or rather, it was being built as-if `USE_DEBUGGER` was off,
thus, nothing provided the definition of `__kmp_omp_debug_struct_info`, `__kmp_debugging`.
Makes sense, because `USE_DEBUGGER` is set in `kmp_config.h`, which is not included explicitly.
It is included by `kmp.h`, but that one is only included inside of the `#if USE_DEBUGGER` block..
I *think* this is the only source file with this issue,
everything else seem to `#include` either `kmp.h` or `kmp_config.h`.
The alternative solution would be to add `add_compile_options(-include kmp_config.h)` in CMake.
I did verify that `__kmp_omp_debug_struct_info` becomes available with this patch.
Fixes [[ https://bugs.llvm.org/show_bug.cgi?id=38612 | PR38612 ]].
Reviewers: AndreyChurbanov, jlpeyton, Hahnfeld
Reviewed By: jlpeyton
Subscribers: guansong, jfb, openmp-commits
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D55783
llvm-svn: 351019
Summary: Replace existing infrastructure for tracking parallel level using global memory with a per-team shared memory variable. This minimizes the impact of the overhead of tracking the parallel level for non-nested cases.
Reviewers: ABataev, caomhin
Reviewed By: ABataev
Subscribers: guansong, openmp-commits
Differential Revision: https://reviews.llvm.org/D55773
llvm-svn: 350747
Summary:
Previous implementation may cause the runtime crash when the number of
teams is > 1024. Patch fixes this problem + reduces number of the atomic
operations by 32 times.
Reviewers: grokos, gtbercea, kkwli0
Subscribers: guansong, jfb, openmp-commits, caomhin
Differential Revision: https://reviews.llvm.org/D56332
llvm-svn: 350524
Summary:
Reduced number of the used register + improved performance propagating
the information about current execution/data sharing mode directly from
the compiler, where it is possible.
In some cases, it requires new/reworked interfaces of the runtime
external functions. Old functions are marked as deprecated.
Reviewers: grokos, gtbercea, kkwli0
Subscribers: guansong, jfb, openmp-commits, caomhin
Differential Revision: https://reviews.llvm.org/D56278
llvm-svn: 350405
The OpenMP runtime's cmake scripts do not correctly locate the
libdevice that the Debian/Ubuntu package nvidia-cuda-toolkit currently
includes, at least on my Ubuntu 18.04.1 installation. This patch
fixes that for me.
This problem was discussed at length in D55269. D40453 added a
similar adjustment in clang, but reviewers of D55269 concluded that,
for the OpenMP runtime, the right place to address this problem is in
cmake's CUDA support. However, it was also suggested we could add a
workaround to OpenMP's cmake scripts now. This patch contains such a
workaround, which I've tried to design so that it will have no harmful
effect if cmake improves in the future.
nvidia-cuda-toolkit also needs improvements because its intended
monolithic CUDA tree shim, /usr/lib/cuda, has many empty directories,
such as bin. I reported that at:
<https://bugs.launchpad.net/ubuntu/+source/nvidia-cuda-toolkit/+bug/1808999>
Reviewed By: grokos
Differential Revision: https://reviews.llvm.org/D55588
llvm-svn: 350377
Add omp_get_device_num() function for 5.0 which returns the number of the
device the current thread is running on. Currently, we are leaving it to the
compiler to handle this properly if it is called inside target.
Also, did some cleanup and updating of duplicate device API functions (in both
libomp and libomptarget) to make them into weak functions that check for the
symbol from libomptarget, and will call the version in libomptarget if it is
present. If any additional device API functions are implemented also in
libomptarget in the future, we should add the dlsym calls to the host functions.
Also, if the omp_target_* functions are to be implemented for the host (this has
been requested), they should attempt to call the libomptarget versions as well.
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D55578
llvm-svn: 350352
Summary:
One of the LLVM optimizations, split critical edges, also clones tail
instructions. This is a dangerous operation for __syncthreads()
functions and this transformation leads to undefined behavior or
incorrect results. Patch fixes this problem by replacing __syncthreads()
function with the assembler instruction, which cost is too high and
wich cannot be copied.
Reviewers: grokos, gtbercea, kkwli0
Subscribers: guansong, openmp-commits, caomhin
Differential Revision: https://reviews.llvm.org/D56274
llvm-svn: 350333
Summary:
Avoid using of the atomic loop to wait for the completion of the
data-sharing interface initialization, use __shfl_sync instead for the
communication within the warp to signal other threads in the warp about
completion of the initialization.
Reviewers: gtbercea, kkwli0, grokos
Subscribers: guansong, jfb, caomhin, openmp-commits
Differential Revision: https://reviews.llvm.org/D56100
llvm-svn: 350129
Summary:
At high optimization level asserts lead to some unexpected results
because of auto-inserted unreachable instructions. This outlining
prevents some of such dangerous optimizations and leads to better
stability.
Reviewers: gtbercea, kkwli0, grokos
Subscribers: guansong, caomhin, openmp-commits
Differential Revision: https://reviews.llvm.org/D56101
llvm-svn: 350128
Fix the newly-added tests to use %python substitution in order to use
the correct path to Python interpreter. Otherwise, they fail on NetBSD
where there is no 'python', just 'pythonX.Y'.
Differential Revision: https://reviews.llvm.org/D56048
llvm-svn: 350001
XFAIL two tests that fail on PowerPC LE Linux due
to the change of default from PIC to no-PIC on that
platform.
A Bug has been opened for this:
https://bugs.llvm.org/show_bug.cgi?id=40082
The tests are:
runtime/test/ompt/misc/control_tool.c
runtime/test/ompt/synchronization/taskwait.c
llvm-svn: 349512
This patch updates the implementation of the ompt_frame_t, ompt_wait_id_t
and ompt_state_t. The final version of the OpenMP 5.0 spec added the "t"
for these types.
Furthermore the structure for ompt_frame_t changed and allows to specify
that the reenter frame belongs to the runtime.
Patch partially prepared by Simon Convent
Reviewers: hbae
llvm-svn: 349458
Summary:
I have discovered this because i wanted to experiment with
building static libomp (with openmp-4.0 support only)
for debugging purposes.
There are three kinds of problems here:
1. `__kmp_compare_and_store_acq()` simply does not exist.
It was added in D47903 by @jlpeyton.
I'm guessing `__kmp_atomic_compare_store_acq()` was meant.
2. In `__kmp_is_ticket_lock_initialized()`,
`lck->lk.initialized` is `std::atomic<bool>`,
while `lck` is `kmp_ticket_lock_t *`.
Naturally, they can't be equality-compared.
Either, it should return the value read from `lck->lk.initialized`,
or do what `__kmp_is_queuing_lock_initialized()` does,
compare the passed pointer with the field in the struct
pointed by the pointer. I think the latter is correct-er choice here.
3. Tests were not versioned.
They assume that `LIBOMP_OMP_VERSION` is at the latest version.
This does not touch LIBOMP_OMP_VERSION=30. That is still broken.
Reviewers: jlpeyton, Hahnfeld, AndreyChurbanov
Reviewed By: AndreyChurbanov
Subscribers: guansong, jfb, openmp-commits, jlpeyton
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D55496
llvm-svn: 349260
The value returned by __kmp_now_nsec() can overflow 32-bit values causing
incorrect values to be returned. The overflow can end up causing a divide
by zero error because in __kmp_initialize_system_tick(), the value
(__kmp_now_nsec() - nsec) can end up being much larger than the numerator:
1e6 * (delay + (now - goal))
during a pathological timing where the current time calculated is much larger
than nsec. When this happens, the value of __kmp_ticks_per_msec is set to zero
which is then used as the denominator in the KMP_NOW_MSEC() macro leading to
the divide by zero error.
Differential Revision: https://reviews.llvm.org/D55300
llvm-svn: 349090
This patch adds the affinity format functionality introduced in OpenMP 5.0.
This patch adds: Two new environment variables:
OMP_DISPLAY_AFFINITY=TRUE|FALSE
OMP_AFFINITY_FORMAT=<string>
and Four new API:
1) omp_set_affinity_format()
2) omp_get_affinity_format()
3) omp_display_affinity()
4) omp_capture_affinity()
The affinity format functionality has two ICV's associated with it:
affinity-display-var (bool) and affinity-format-var (string).
The affinity-display-var enables/disables the functionality through the
envirable OMP_DISPLAY_AFFINITY. The affinity-format-var is a formatted
string with the special field types beginning with a '%' character
similar to printf
For example, the affinity-format-var could be:
"OMP: host:%H pid:%P OStid:%i num_threads:%N thread_num:%n affinity:{%A}"
The affinity-format-var is displayed by every thread implicitly at the beginning
of a parallel region when any thread's affinity has changed (including a brand
new thread being spawned), or explicitly using the omp_display_affinity() API.
The omp_capture_affinity() function can capture the affinity-format-var in a
char buffer. And omp_set|get_affinity_format() allow the user to set|get the
affinity-format-var explicitly at runtime. omp_capture_affinity() and
omp_get_affinity_format() both return the number of characters needed to hold
the entire string it tried to make (not including NULL character). If not
enough buffer space is available,
both these functions truncate their output.
Differential Revision: https://reviews.llvm.org/D55148
llvm-svn: 349089
Disable KMP_HAVE_QUAD when building via gcc on NetBSD system,
as the build fails due to unimplemented builtins:
.../kmp_atomic.cpp.o: In function `__kmpc_atomic_cmplx16_mul':
.../kmp_atomic.cpp:1332: undefined reference to `__multc3'
.../kmp_atomic.cpp.o: In function `__kmpc_atomic_cmplx16_div':
.../kmp_atomic.cpp:1334: undefined reference to `__divtc3'
...
Differential Revision: https://reviews.llvm.org/D55478
llvm-svn: 348886
Switch NetBSD from reading /proc (which is broken) to getloadavg()
(which is already used by Darwin). NetBSD discourages using procfs
in favor of system API calls.
Differential Revision: https://reviews.llvm.org/D55486
llvm-svn: 348885
Summary:
Use the sysctl(3) function to check whether an address is mapped
into the address space.
Reviewers: mgorny, joerg, #openmp
Reviewed By: mgorny
Subscribers: openmp-commits
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D55549
llvm-svn: 348874
Summary: _lwp_self() returns current Thread Id in a numeric version on NetBSD.
Reviewers: joerg, mgorny, #openmp
Reviewed By: mgorny
Subscribers: llvm-commits, openmp-commits, #openmp
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D55497
llvm-svn: 348873
Increase the range for omp_get_wtick() test to allow for 0.01
(from <0.01). This is needed for NetBSD where it returns exactly that
value due to CLOCKS_PER_SEC being 100. This should not cause
a significant difference from e.g. FreeBSD where it is 128,
and especially from Linux where CLOCKS_PER_SEC is apparently meaningless
and sysconf(_SC_CLK_TCK) gives 100 as well.
Differential Revision: https://reviews.llvm.org/D55493
llvm-svn: 348857
On NetBSD, alloca() is in stdlib.h and there is no alloca.h. Adjust
the includes appopriately.
Differential Revision: https://reviews.llvm.org/D55487
llvm-svn: 348856
Pass `-n -s` instead of `--numeric --stable` to sort(1), as long options
are not supported by NetBSD sort implementation. `-n` is defined
by POSIX, so it should be fully portable. `-s` is used consistently
at least in GNU sort and FreeBSD sort, and I honestly doubt it would
cause issues with any other implementation supporting `--stable`.
Differential Revision: https://reviews.llvm.org/D55479
llvm-svn: 348855
Prefer using '-std=gnu++11' over '-std=c++11' when available, as NetBSD
exposes the correct alloca() implementation only with gnu* C/C++
standards.
Differential Revision: https://reviews.llvm.org/D55477
llvm-svn: 348854
Fix two build issues:
1) Recent commit 348756 accidentally included Unix clang compilers
to use immintrin.h when only clang-cl should be using it leading
to the following error:
openmp-llvm/runtime/src/kmp_lock.cpp:2035:25: error: always_
inline function '_xbegin' requires target feature 'rtm', but would be inlined into function
'__kmp_test_adaptive_lock_only' that is compiled without support for 'rtm'
kmp_uint32 status = _xbegin();
This patch changes the guard to use immintrin.h to only use clang-cl instead of all clang
2) gcc-8 gives a warning about multiline comment in kmp_runtime.cpp:
This patch just changes it to a two line comment
openmp-llvm/runtime/src/kmp_runtime.cpp:7697:8: warning: multi-line comment [-Wcomment]
#endif // KMP_OS_LINUX || KMP_OS_DRAGONFLY || KMP_OS_FREEBSD || KMP_OS_NETBSD \
llvm-svn: 348783
Summary:
Use the original shuffle implementation for __kmpc_shuffle_int64 since
default implementation uses the same implementation.
Reviewers: gtbercea
Subscribers: guansong, caomhin, openmp-commits
Differential Revision: https://reviews.llvm.org/D55514
llvm-svn: 348772
Summary:
Shuffle on 64bit data is allowed only for CUDA >= 9.0. Also, fixed the
constant for the mask, need one extra L in the end.
Reviewers: gtbercea, kkwli0
Subscribers: guansong, caomhin, openmp-commits
Differential Revision: https://reviews.llvm.org/D55440
llvm-svn: 348758
Summary: This patch permits OpenMP to build and work (with both gcc and clang) on OpenBSD. It mostly follows what was done for FreeBSD and NetBSD, except OpenBSD does not have pthread_getattr_np support, so it follows OS X in that one instance.
Reviewers: #openmp, krytarowski
Reviewed By: krytarowski
Subscribers: guansong, jfb, emaste, mgorny, krytarowski, #openmp
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D34280
llvm-svn: 348726
Summary:
Additions mostly follow FreeBSD and NetBSD and are not intrusive.
There is similar patch for OpenBSD: https://reviews.llvm.org/D34280
The -lm was being omitted due to -Wl,--as-needed in cmake rule, similar patch is in freebsd-ports/devel/llvm-devel port.
Simple OpenMP programs compile and work as expected:
$ clang-devel ~/omp_hello.c -fopenmp -I/usr/local/llvm-devel/include
$ LD_LIBRARY_PATH=/usr/local/llvm-devel/lib OMP_NUM_THREADS=100 ./a.out
The assertion in LLVMgold.so when -fopenmp was used together with -flto in 20170524 snapshot is no longer triggered on current svn-trunk and works fine as in llvm-4.0 with our local patches.
Reviewers: #openmp, krytarowski
Reviewed By: krytarowski
Subscribers: dexonsmith, jfb, krytarowski, guansong, gregrodgers, emaste, mgorny, mehdi_amini
Differential Revision: https://reviews.llvm.org/D35129
llvm-svn: 348725
Summary:
Introduced special noinline function log that allows to save some
registers for optimized builds but with enabled logging. Also, it
increases the stability of the optimized builds with inlined runtime.
Reviewers: gtbercea, kkwli0
Reviewed By: gtbercea
Subscribers: caomhin, guansong, openmp-commits
Differential Revision: https://reviews.llvm.org/D55436
llvm-svn: 348606
Summary:
According to the standard, after memory flushing the changes in the
memory must be visible to all the threads in all teams. Patch fixes
this.
Reviewers: gtbercea, kkwli0
Subscribers: guansong, jfb, caomhin, openmp-commits
Differential Revision: https://reviews.llvm.org/D55370
llvm-svn: 348491
Summary:
Reworked runtime to make it compatible with the requirements of the
original runtime library. Also, simplified some code to reduce number of
function calls.
Reviewers: gtbercea, kkwli0
Subscribers: guansong, jfb, caomhin, openmp-commits
Differential Revision: https://reviews.llvm.org/D55130
llvm-svn: 348003
There is a conflict between libomptarget and libomp concerning some of the
standard OpenMP device API which needs further intestigation.
llvm-svn: 347932
This patch adds __kmpc_omp_reg_task_with_affinity to register affinity
information for tasks. For now, the affinity information is not used,
and the function always succeeds. This also adds the kmp_task_affinity_info_t
structure to store the task affinity information.
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D55026
llvm-svn: 347907
This change renames ompt_mutex_impl_unknown to ompt_mutex_impl_none,
following the name change in the specification.
Patch by Hansang Bae
Differential Revision: https://reviews.llvm.org/D54347
llvm-svn: 347802
* Fix calculation of string length.
* Remove NULL-check of pointer which has been dereferenced.
Patch by Andrey Churbanov
Differential Revision: https://reviews.llvm.org/D54948
llvm-svn: 347801
There is low probability that array th_hot_teams can be
accessed out of bound (when many nested levels are requested
to keep hot teams via KMP_HOT_TEAMS_MAX_LEVEL). The patch
adds the check of index that fixes the problem.
Patch by Andrey Churbanov
Differential Revision: https://reviews.llvm.org/D54950
llvm-svn: 347800
Add omp_get_device_num() function for 5.0 which returns the number of the device
the current thread is running on. Also, did some cleanup and updating of device
API functions to make them into weak functions that should be replaced with
libomptarget functions when libomptarget is present.
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D54342
llvm-svn: 347799
Summary: To enable the compiler to optimize parts of the function that are not needed when runtime can be omitted, a new version of the SPMD deinit kernel function is needed. This function takes the runtime required flag as an argument.
Reviewers: ABataev, kkwli0, caomhin
Reviewed By: ABataev
Subscribers: guansong, openmp-commits
Differential Revision: https://reviews.llvm.org/D54969
llvm-svn: 347714
Summary:
Added functions __kmpc_nvptx_teams_reduce_nowait_simple and
__kmpc_nvptx_teams_end_reduce_nowait_simple to implement basic support
for reductions across the teams.
Reviewers: gtbercea, kkwli0
Subscribers: guansong, jfb, caomhin, openmp-commits
Differential Revision: https://reviews.llvm.org/D54967
llvm-svn: 347710
Summary: Refactor the checking for SPMD mode and whether the runtime is initialized or not. This uses constant flags which enables the runtime to optimize out unused sections of code that depend on these flags.
Reviewers: ABataev, caomhin
Reviewed By: ABataev
Subscribers: guansong, jfb, openmp-commits
Differential Revision: https://reviews.llvm.org/D54960
llvm-svn: 347698
Summary:
The base pointer for the lambda mapping must point to the lambda capture
placement and pointer must point to the captured variable itself. Patch
fixes this problem.
Reviewers: gtbercea
Subscribers: guansong, openmp-commits, kkwli0, caomhin
Differential Revision: https://reviews.llvm.org/D54260
llvm-svn: 346407
Summary:
The previously used combination `PTR_AND_OBJ | PRIVATE` could be used
for mapping of some data in Fortran. Changed it to `PTR_AND_OBJ |
LITERAL`.
Reviewers: gtbercea
Subscribers: guansong, caomhin, openmp-commits
Differential Revision: https://reviews.llvm.org/D54035
llvm-svn: 345981
Summary:
Current globalization scheme works correctly only for SPMD+lightweight
runtime mode and does not work for full runtime. Patch improves support
for the globalization scheme + reduces global memory consumption in
lightweight runtime mode.
Patch adds runtime functions to work with the statically allocated
global memory. It allows to improve performance and memory consumption.
This global memory must be allocated by the compiler.
Reviewers: grokos, kkwli0, gtbercea, caomhin
Subscribers: guansong, jfb, openmp-commits
Differential Revision: https://reviews.llvm.org/D53943
llvm-svn: 345976
Summary: In the case of coalesced global records, we need to push the exact data size passed in. This patch fixes this by outlining the common functionality of the previous push function and by adding a separate entry point for coalesced pushes. The pop function remains unchanged.
Reviewers: ABataev, grokos, caomhin
Reviewed By: ABataev, grokos
Subscribers: jholewinski, cfe-commits, Hahnfeld, guansong, jfb, openmp-commits
Differential Revision: https://reviews.llvm.org/D53141
llvm-svn: 345867
Summary:
Added support for correct mapping of variables captured by reference in
lambdas. That kind of mapping may appear only in target-executable
regions and must follow the original lambda or another lambda capture
for the same lambda.
The expected data: base address - the address of the lambda, begin
pointer - pointer to the address of the lambda capture, size - size of
the captured variable.
When OMP_TGT_MAPTYPE_PTR_AND_OBJ mapping type is seen in
target-executable region, the target address of the last processed item
is taken as the address of the original lambda `tgt_lambda_ptr`. Then,
the pointer to capture on the device is calculated like `tgt_lambda_ptr
+ (host_begin_pointer - host_begin_base)` and the target-based address
of the original variable (which host address is
`*(void**)begin_pointer`) is written to that pointer.
Reviewers: kkwli0, gtbercea, grokos
Subscribers: openmp-commits
Differential Revision: https://reviews.llvm.org/D51107
llvm-svn: 345608
Initializing an ompt_data_t object using the pointer union member is potentially
unsafe in 32-bit programs. This change fixes the issue
by using the constant, ompt_data_none.
Patch by Hansang Bae
Differential Revision: https://reviews.llvm.org/D52046
llvm-svn: 343785
On Windows, child workers are terminated by the parent during the normal
program exit process (ExitProcess()) and they are not able to finish generating
their OpenMP events. We can force manual library shut down in __kmpc_end() to
fix this at least for the cases where __kmpc_end() is properly inserted.
Patch by Hansang Bae
Differential Revision: https://reviews.llvm.org/D52628
llvm-svn: 343619
If the user requested LIBOMPTARGET_NVPTX_DEBUG, include asserts in
the bitcode library. Everything else will have very unpleasent
effects because asserts will appear when falling back to the static
library libomptarget-nvptx.a.
Differential Revision: https://reviews.llvm.org/D52701
llvm-svn: 343477
Pass in the correct value of isRuntimeUninitialized() which solves
parallel reductions as reported on the mailing list.
For reference: r333285 did the same for loop scheduling.
Differential Revision: https://reviews.llvm.org/D52725
llvm-svn: 343476
Patch suggested by Kelvin Li: removed optional "kind=" part of kind-selector
for variables with long names and kind names.
Differential Revision: https://reviews.llvm.org/D52712
llvm-svn: 343475
NVPTX requires addresses of pointer locations to be 8-byte aligned
or there will be an exception during runtime.
This could happen without this patch as shown in the added test:
getId() requires 4 byte of stack and putValueInParallel() uses 16
bytes to store the addresses of the captured variables.
Differential Revision: https://reviews.llvm.org/D52655
llvm-svn: 343402
According to OpenMP 4.5, p250:12-14:
If the requested nest level is outside the range of 0 and the
nest level of the current thread, as returned by the omp_get_level
routine, the routine returns -1.
The SPMD code path will need a similar fix.
Differential Revision: https://reviews.llvm.org/D51787
llvm-svn: 343401
Clang trunk will serialize nested parallel regions. Check that this
is correctly reflected in various API methods.
Differential Revision: https://reviews.llvm.org/D51786
llvm-svn: 343382
There is no support and according to the OpenMP 4.5, p238:7-9:
For implementations that do not support dynamic adjustment
of the number of threads this routine has no effect: the
value of dyn-var remains false.
Add a test that cancellation and nested parallelism aren't
supported either.
Differential Revision: https://reviews.llvm.org/D51785
llvm-svn: 343381
If there is no num_threads() clause we must consider the
nthreads-var ICV. Its value is set by omp_set_num_threads()
and can be queried using omp_get_max_num_threads().
The rewritten code now closely resembles the algorithm given
in the OpenMP standard.
Differential Revision: https://reviews.llvm.org/D51783
llvm-svn: 343380
infinite loop on removing non-mapped pointer-with-object.
Added test to check that libomptarget does not cause infinite loop when
trying to unmap the pointer-with-object data that was not previously
mapped.
llvm-svn: 343344
This patch also introduces testing for libomptarget-nvptx
which has been missing until now. I propose to add tests for
all bugs that are fixed in the future.
The target check-libomptarget-nvptx is not run by default because
- we can't determine if there is a GPU plugged into the system.
- it will require the latest Clang compiler. Keeping compatibility
with older releases would prevent testing newer code generation
developed in trunk.
Differential Revision: https://reviews.llvm.org/D51687
llvm-svn: 343324
This patch puts the __kmpc_critical_with_hint function in dllexports
and also replaces some OMP_45_ENABLED to OMP_50_ENABLED
Differential Revision: https://reviews.llvm.org/D52380
llvm-svn: 343143
Balanced affinity only updated the thread's affinity with the operating system.
This change also has the thread's private mask reflect that change as well so
that any API that probes the thread's affinity mask will report the correct
mask value.
Differential Revision: https://reviews.llvm.org/D52379
llvm-svn: 343142
This patch updates the ittnotify sources to the latest
corresponding with Intel(R) VTune(TM) Amplifier 2018
Differential Revision: https://reviews.llvm.org/D52378
llvm-svn: 343139
This change improves the performance of 376.kdtree by giving the compiler an
opportunity to do inlining and other optimizations for the call path,
__kmpc_omp_task_complete_if0()->__kmp_task_finish(), which is one of the hot
paths in the program; some functions in kmp_taskdeps.cpp were moved to the new
header file, kmp_taskdeps.h to achieve this.
Patch by Hansang Bae
Differential Revision: https://reviews.llvm.org/D51889
llvm-svn: 343138
This change includes miscellaneous improvements as follows:
1) Added ompt_get_proc_id() implementation for Windows
2) Added parser and print tool for omp-tool-var, just in case it needs
to be printed (OMP_DISPLAY_ENV)
3) omp_control_tool is exported on Windows
Patch by Hansang Bae
Differential Revision: https://reviews.llvm.org/D50538
llvm-svn: 343137
Summary: NFC - just fixing a bug: the empty slot test was before the re-setting of the Stack pointer.
Reviewers: ABataev, caomhin, Hahnfeld
Reviewed By: ABataev
Subscribers: guansong, openmp-commits
Differential Revision: https://reviews.llvm.org/D52122
llvm-svn: 343006
Summary:
There is currently no supported situation where the warp master is not the first thread in the warp.
This also avoids the device execution from hanging on Volta GPUs when ballot_sync is called by a number of threads that is less that the size of a warp.
Reviewers: ABataev, caomhin, grokos
Reviewed By: grokos
Subscribers: guansong, openmp-commits
Differential Revision: https://reviews.llvm.org/D50188
llvm-svn: 342972
Summary:
We need the support for per-team shared variables to support codegen for
lastprivates/reductions. Patch adds this support by using shared memory
if the total size of the reductions/lastprivates is <= 128 bytes,
then pre-allocated buffer in global memory if size is <= 4K bytes,or
uses malloc/free, otherwise.
Reviewers: gtbercea, kkwli0, grokos
Subscribers: guansong, openmp-commits
Differential Revision: https://reviews.llvm.org/D51875
llvm-svn: 342737
Summary:
Missed operation of the incrementing iterator when required just to
continue execution.
Reviewers: kkwli0, gtbercea, grokos
Subscribers: guansong, openmp-commits
Differential Revision: https://reviews.llvm.org/D51937
llvm-svn: 341964
Some types and callback signatures have changed from TR6 to TR7.
Major changes (only adding signatures and stubs):
(-remove idle callback) done by D48362
-add reduction and dispatch callback
-add get_task_memory and finalize_tool runtime entry points
-ompt_invoker_t becomes ompt_parallel_flag_t
-more types of sync_regions
Patch provided by Simon Convent
Reviewers: hbae, protze.joachim
Differential Revision: https://reviews.llvm.org/D50774
llvm-svn: 341834
Add atomic hint flags to the enum.
The hint parameter type was changed to uint32_t in __kmpc_critical_with_hint()
Patch by Olga Malysheva
Differential Revision: https://reviews.llvm.org/D51235
llvm-svn: 341694
ident flags reserved for atomic hints.
This patch adds omp_sync_hint_t to omp.h and omp_sync_hint_kind to omp_lib.h.
For better maintainability the list of macros for ident flags was replaced with
a enum. The new KMP_IDENT_ATOMIC_HINT_MASK was added to the enum to
support possible future atomic hints.
Also fix omp_lib.h.var to be under 72 chars again after 5.0 OpenMP Memory commit
Patch by Olga Malysheva
Differential Revision: https://reviews.llvm.org/D51233
llvm-svn: 341693
Implemented omp_alloc, omp_free, omp_{set,get}_default_allocator entries,
and OMP_ALLOCATOR environment variable.
Added support for HBW memory on Linux if libmemkind.so library is accessible
(dynamic library only, no support for static libraries).
Only used stable API (hbwmalloc) of the memkind library
though we may consider using experimental API in future.
The ICV def-allocator-var is implemented per implicit task similar to
place-partition-var. In the absence of a requested allocator, the uses the
default allocator.
Predefined allocators (the only ones currently available) are made similar
for C and Fortran, - pointers (long integers) with values 1 to 8.
Patch by Andrey Churbanov
Differential Revision: https://reviews.llvm.org/D51232
llvm-svn: 341687
This is a follow-up to r341371: The new test for PR38704 doesn't
work with Clang 6.0. It uses an UNSUPPORTED: clang-6, but that
hasn't worked because the compiler features weren't known to lit.
llvm-svn: 341448
cuDeviceGetProperties has apparently been deprecated since CUDA 5.0.
Nvidia started using annotations only in CUDA 9.2, so nobody noticed
nor cared before.
The new function returns the same values, tested with a P100.
Differential Revision: https://reviews.llvm.org/D51624
llvm-svn: 341372
* cg and HasCancel in WorkDescr were never read and can be removed.
* This eliminates the last use of priv in ThreadPrivateContext.
* CounterGroup is unused afterwards.
* Remove duplicate external declares in omptarget-nvptx.cu that are
already in the header omptarget-nvptx.h.
Differential Revision: https://reviews.llvm.org/D51622
llvm-svn: 341370
If the runtime is uninitialized the master thread must Enqueue the
state object, and ALL threads must return immediately.
Found post-commit of https://reviews.llvm.org/D51222.
llvm-svn: 341328
Summary:
Implemented simple and lightweight runtime support for SPMD mode-based
constructs. It adds support for L2 sequential parallelism wihtout full
runtime support. Also, patch fixes some use cases for
uninitialized|lightweight runtime.
Reviewers: grokos, kkwli0, Hahnfeld, gtbercea
Subscribers: guansong, openmp-commits
Differential Revision: https://reviews.llvm.org/D51222
llvm-svn: 340944
Summary:
Removed the function that used a lock and varargs
Used the same mechanism as for debug messages
Reviewers: ABataev, gtbercea, grokos, Hahnfeld
Reviewed By: gtbercea, Hahnfeld
Subscribers: mikerice, ABataev, RaviNarayanaswamy, guansong, openmp-commits
Differential Revision: https://reviews.llvm.org/D51226
llvm-svn: 340767
The __kmp_execute_tasks_template() function reads the task_team and
current_task from the thread structure. There appears to be a pathological
timing where the number of threads in the hot team decreases and so a
thread is put in the pool via __kmp_free_thread(). It could be the case that:
1) A thread reads th_task_team into task_team local variables
and is then interrupted by the OS
2) Master frees the thread and sets current task and task team to NULL
3) The thread reads current_task as NULL
When this happens, current_task is dereferenced and a segfault occurs.
This patch just checks for current_task to not be NULL as well.
Differential Revision: https://reviews.llvm.org/D50651
llvm-svn: 340632
If hot teams are not being used, this code could seg fault without the added
check, and does so when composability is used in conjunction with nesting.
The fix prevents the segfault.
Differential Revision: https://reviews.llvm.org/D50649
llvm-svn: 340629
Exclude nested explicit tasks from timing, only outer level explicit task
counted and its time added to barrier arrive time for the thread.
Differential Revision: https://reviews.llvm.org/D50584
llvm-svn: 340628
Summary:
Right now, only the OMP_TARGET_OFFLOAD=DISABLED was implemented. Added support for the other MANDATORY and DEFAULT values.
Reviewers: gtbercea, ABataev, grokos, caomhin, Hahnfeld
Reviewed By: Hahnfeld
Subscribers: protze.joachim, gtbercea, AlexEichenberger, RaviNarayanaswamy, Hahnfeld, guansong, openmp-commits
Differential Revision: https://reviews.llvm.org/D50522
llvm-svn: 340542
The idle callback was removed from the spec as of TR7.
This removes it from the implementation.
Patch provided by Simon Convent
Reviewers: hbae, protze.joachim
Differential Revision: https://reviews.llvm.org/D48362
llvm-svn: 339771
This change fixes an incorrect behavior of the omp_control_tool function when
called from Fortran applications. A tool callback function for this event is
supposed to get NULL for the third argument according to the specification, but
the current implementation just passes a garbage value. A possible fix is to use
the OPTIONAL attribute for the third argument.
Patch by Hansang Bae
Differential Revision: https://reviews.llvm.org/D50565
llvm-svn: 339585
This patch cleans up unused functions, variables, sign compare issues, and
addresses some -Warning flags which are now enabled including -Wcast-qual.
Not all the warning flags in LibompHandleFlags.cmake are enabled, but some
are with this patch.
Some __kmp_gtid_from_* macros in kmp.h are switched to static inline functions
which allows us to remove the awkward definition of KMP_DEBUG_ASSERT() and
KMP_ASSERT() macros which used the comma operator. This had to be done for the
innumerable -Wunused-value warnings related to KMP_DEBUG_ASSERT()
Differential Revision: https://reviews.llvm.org/D49105
llvm-svn: 339393
This patch adds a test using the doacross clauses in OpenMP and removes gcc from
testing kmp_doacross_check.c which is only testing the kmp rather than the
gomp interface.
Differential Revision: https://reviews.llvm.org/D50014
llvm-svn: 338757
This is broken per PR36561 and PR36574, so disable it for now until
somebody interested can take a look. OMPT can still be activated manually
by passing -DLIBOMP_OMPT_SUPPORT=ON during configuration.
Differential Revision: https://reviews.llvm.org/D50086
llvm-svn: 338721
Jonathan Peyton