When spilling, the spill size will depend on the size of register class.
For .vf vector instructions, it may spill the floating point scalar
argument. In order to use the correct load/store instructions for
spilling, we need to provide the correct floating point register class
for the .vf vector pseudo instructions.
In this commit, we define the .vf pseudo instructions as three
different kinds of pseudo instructions for half/float/double. For
example, PseudoVFADD_M1 will become as PseudoVFADD_F16_M1,
PseudoVFADD_F32_M1, and PseudoVFADD_F64_M1.
Differential Revision: https://reviews.llvm.org/D95234
These instructions produce 2*SEW result so the input can't have
an LMUL=8 or the result would need a non-existant LMUL=16. So
only create pseudos for LMUL up to 4.
Differential Revision: https://reviews.llvm.org/D95189
The fault-only-first-load instructions can reduce VL if an element
other than element 0 triggers a memory fault. This can be used to
vectorize loops with data dependent exit conditions like strcmp or
strlen.
This patch adds a VL output to these intrinsics so that the new
VL value can be captured by software. This will be expanded to
'csrr gpr, vl' after the vleff instruction during SelectionDAG.
By doing this with one intrinsic we are able to guarantee that the
csrr reads the VL value produced by the vleff instruction. Having
it as a separate intrinsic would make it impossible to guarantee
ordering without making every other vector intrinsic have side
effects.
The intrinsics are expanded during lowering into two ISD nodes
that are glued together. These ISD nodes will go
through isel separately, but should maintain the glue so that they
get emitted adjacently by InstrEmitter.
I've only ran the chain through the vleff instruction, allowing
the READ_VL to be deleted if it is unused.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D94286
Upgrade RISC-V V extension to v1.0-08a0b46.
Indexed load/store have ordered and unordered form.
New whole vector load/store.
Differential Revision: https://reviews.llvm.org/D93614
For Zvlsseg, we need continuous vector registers for the values. We need
to define new register classes for the different combinations of (number
of fields and LMUL). For example,
when the number of fields(NF) = 3, LMUL = 2, the values will be assigned
to (V0M2, V2M2, V4M2), (V2M2, V4M2, V6M2), (V4M2, V6M2, V8M2), ...
We define the vlseg intrinsics with multiple outputs. There is no way to
describe the codegen patterns with multiple outputs in the tablegen
files. We do the codegen in RISCVISelDAGToDAG and use EXTRACT_SUBREG to
extract the values of output.
The multiple scalable vector values will be put into a struct. This
patch is depended on the support for scalable vector struct.
Differential Revision: https://reviews.llvm.org/D94229
Make it easier to reuse for intrinsic vrgatherei16
which needs to encode both LMUL & EMUL in the instruction name,
like PseudoVRGATHEREI16_VV_M1_M1 and PseudoVRGATHEREI16_VV_M1_M2.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94951
This patch factors out the "VLMax" operand passed to most
scalable-vector ISel patterns into a property of each VType.
This is seen as a preparatory change to allow RVV in the future to
more easily support fixed-length vector types with constrained vector
lengths, with the AVL operand set to the length of the fixed-length
vector. It has no effect on the scalable code generation path.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D94594
This patch custom lowers ISD::VSCALE into a csrr vlenb followed
by a shift right by 3 followed by a multiply by the scale amount.
I've added computeKnownBits support to indicate that the csrr vlenb
always produces 3 trailng bits of 0s so the shift right is "exact".
This allows the shift and multiply sequence to be nicely optimized
into a single shift or removed completely when the scale amount is
a power of 2.
The non power of 2 case multiplying by 24 is still producing
suboptimal code. We could remove the right shift and use a
multiply by 3. Hopefully we can improve DAG combine to fix that
since it's not unique to this sequence.
This replaces D94144.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D94249
We can use a 0 immediate to avoid needing to materialize 0 into
an FPR first.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D94459
Define the `vfclass` IR intrinsics for the respective V instructions.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com>
Differential Revision: https://reviews.llvm.org/D94356
This patch moves all but the BaseInstr to bits in TSFlags.
For the index fields, we can just use a bit to indicate their presence.
The locations of the operands are well defined.
This reduces the llc binary by about 32K on my build. It also
removes the binary search of the table from the custom inserter.
Instead we just check that the SEW op is present.
Reviewed By: rogfer01
Differential Revision: https://reviews.llvm.org/D94375
Define the `vfsqrt` IR intrinsics for the respective V instructions.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com>
Differential Revision: https://reviews.llvm.org/D93745
There are vmsle(u).vx and vmsle(u).vi instructions, but there is
only vmslt(u).vx and no vmslt(u).vi. vmslt(u).vi can be emulated
for some immediates by decrementing the immediate and using vmsle(u).vi.
To avoid the user needing to know about this, this patch does this
conversion.
The assembler does the same thing for vmslt(u).vi and vmsge(u).vi
pseudoinstructions. There is no vmsge(u).vx intrinsic or
instruction so this patch is limited to vmslt(u).
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D94070
Define intrinsics:
1. vfcvt.xu.f.v/vfcvt.x.f.v
2. vfcvt.rtz.xu.f.v/vfcvt.rtz.x.f.v
3. vfcvt.f.xu.v/vfcvt.f.x.v
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Monk Chiang <monk.chiang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93933
Define intrinsics:
1. vfncvt.xu.f.w/vfncvt.x.f.w
2. vfncvt.rtz.xu.f.w/vfncvt.rtz.x.f.w
3. vfncvt.f.xu.w/vfncvt.f.x.w
4. vfncvt.f.f.w/vfncvt.rod.f.f.w
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Monk Chiang <monk.chiang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93932
Define intrinsics:
1. vfwcvt.xu.f.v/vfwcvt.x.f.v
2. vfwcvt.rtz.xu.f.v/vfwcvt.rtz.x.f.v
3. vfwcvt.f.xu.v/vfwcvt.f.x.v
4. vfwcvt.f.f.v
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Monk Chiang <monk.chiang@sifive.com>
Differential Revision: https://reviews.llvm.org/D93855
This patch defines vcompress intrinsics and lower to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Differential revision: https://reviews.llvm.org/D93809
Define vsext/vzext intrinsics.and lower to V instructions.
Define new fraction register class fields in LMULInfo and a
NoReg to present invalid LMUL register classes.
Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Co-Authored-by: Zakk Chen <zakk.chen@sifive.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93893
If the destination is tied, then user has some control of the
register used for input. They would have the ability to control
the value of any tail elements. By using tail agnostic we take
this option away from them.
Its not clear that the intrinsics are defined such that this isn't
supposed to work. And undisturbed is a valid implementation for agnostic
so code wouldn't even fail to work on all systems if we always used
agnostic.
The vcompress intrinsic is defined to require tail undisturbed so
at minimum we need this for that instruction or need to redefine
the intrinsic.
I've made an exception here for vmv.s.x/fmv.s.f and reduction
instructions which only write to element 0 regardless of the tail
policy. This allows us to keep the agnostic policy on those which
should allow better redundant vsetvli removal.
An enhancement would be to check for undef input and keep the
agnostic policy, but we don't have good test coverage for that yet.
Reviewed By: khchen
Differential Revision: https://reviews.llvm.org/D93878
The spec for these instructions include this note. "The destination register
cannot overlap either the source register or the mask register ('v0') if the
instruction is masked." So we need earlyclobber to enforce this constraint.
I've regenerated the tests with update_llc_test_checks.py to show the
effects of the earlyclobber.
Reviewed By: khchen, frasercrmck
Differential Revision: https://reviews.llvm.org/D93867
Define vmclr.m/vmset.m intrinsics and lower to vmxor.mm/vmxnor.mm.
Ideally all rvv pseudo instructions could be implemented in C header,
but those two instructions don't take an input, codegen can not guarantee
that the source register becomes the same as the destination.
We expand pseduo-v-inst into corresponding v-inst in
RISCVExpandPseudoInsts pass.
Reviewed By: craig.topper, frasercrmck
Differential Revision: https://reviews.llvm.org/D93849
Define those intrinsics and lower to V instructions.
Use update_llc_test_checks.py for viota.m tests to check
earlyclobber is applied correctly.
mask viota.m tests uses the same argument as input and mask for
avoid dependency of D93364.
We work with @rogfer01 from BSC to come out this patch.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D93823
Define vwredsumu/vwredsum/vfwredosum/vfwredsum
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Zakk Chen <zakk.chen@sifive.com>
Differential Revision: https://reviews.llvm.org/D93807
Define vpopc/vfirst intrinsics and lower to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93795
Define vector mask-register logical intrinsics and lower them
to V instructions. Also define pseudo instructions vmmv.m
and vmnot.m.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Zakk Chen <zakk.chen@sifive.com>
Differential Revision: https://reviews.llvm.org/D93705
This patch defines vrgather intrinsics and lower to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Differential revision: https://reviews.llvm.org/D93797
integer group:
vredsum/vredmaxu/vredmax/vredminu/vredmin/vredand/vredor/vredxor
float group:
vfredosum/vfredsum/vfredmax/vfredmin
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Zakk Chen <zakk.chen@sifive.com>
Differential Revision: https://reviews.llvm.org/D93746
This patch extends the SDNode ISel support for RVV from only the
vector/vector instructions to include the vector/scalar and
vector/immediate forms.
It uses splat_vector to carry the scalar in each case, except when
XLEN<SEW (RV32 SEW=64) when a custom node `SPLAT_VECTOR_I64` is used for
type-legalization and to encode the fact that the value is sign-extended
to SEW. When the scalar is a full 64-bit value we use a sequence to
materialize the constant into the vector register.
The non-intrinsic ISel patterns have also been split into their own
file.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Fraser Cormack <fraser@codeplay.com>
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93312
Also include a special case pattern to use vmv.v.x vd, zero when
the argument is 0.0.
Reviewed By: khchen
Differential Revision: https://reviews.llvm.org/D93672
This patch defines vfwmacc, vfwnmacc, vfwmsc, vfwnmsac intrinsics
and lower to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Differential Revision: https://reviews.llvm.org/D93693
Define vmerge/vfmerge intrinsics and lower to V instructions.
Include support for vector-vector vfmerge by vmerge.vvm.
We work with @rogfer01 from BSC to come out this patch.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93674
Define the vfmin, vfmax IR intrinsics for the respective V instructions.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: Evandro Menezes <evandro.menezes@sifive.com>
Differential Revision: https://reviews.llvm.org/D93673
This patch defines vfmadd/vfnmacc, vfmsac/vfnmsac, vfmadd/vfnmadd,
and vfmsub/vfnmsub lower to V instructions.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Differential Revision: https://reviews.llvm.org/D93691
This patch defines vwmacc[u|su|us] intrinsics and lower to V instructions.
We work with @rogfer01 from BSC to come out this patch.
Authored-by: Roger Ferrer Ibanez <rofirrim@gmail.com>
Co-Authored-by: ShihPo Hung <shihpo.hung@sifive.com>
Differential Revision: https://reviews.llvm.org/D93675
Hsiangkai Wang