Instead of checking if each symlink exists before removing it,
remove the whole temp dir housing the symlinks before recreating it.
This is a bit shorter, conceptually simpler (in that the first
and consecutive test runs have more similar behavior), it's what we're
already doing in almost all places where we do it, and it works if the
symlink exists but is a dead link (e.g. when it points into the build
dir but the build dir is renamed).
No intended behavior change.
clang with -flto does not handle -foptimization-record-path=<path>
This dulicates the code from ToolChains/Clang.cpp with modifications to
support everything in the same fashion.
Adds a new data structure, ImmutableGraph, and uses RDF to find LVI gadgets and add them to a MachineGadgetGraph.
More specifically, a new X86 machine pass finds Load Value Injection (LVI) gadgets consisting of a load from memory (i.e., SOURCE), and any operation that may transmit the value loaded from memory over a covert channel, or use the value loaded from memory to determine a branch/call target (i.e., SINK).
Also adds a new target feature to X86: +lvi-load-hardening
The feature can be added via the clang CLI using -mlvi-hardening.
Differential Revision: https://reviews.llvm.org/D75936
This pass replaces each indirect call/jump with a direct call to a thunk that looks like:
lfence
jmpq *%r11
This ensures that if the value in register %r11 was loaded from memory, then
the value in %r11 is (architecturally) correct prior to the jump.
Also adds a new target feature to X86: +lvi-cfi
("cfi" meaning control-flow integrity)
The feature can be added via clang CLI using -mlvi-cfi.
This is an alternate implementation to https://reviews.llvm.org/D75934 That merges the thunk insertion functionality with the existing X86 retpoline code.
Differential Revision: https://reviews.llvm.org/D76812
This wasn't respecting the flush mode based on the default, and also
wasn't correctly handling the explicit
-fno-cuda-flush-denormals-to-zero overriding the mode.
The driver enables -fdiagnostics-show-option by default, so flip the CC1
default to reduce the lengths of common CC1 command lines.
This change also makes ParseDiagnosticArgs() consistently enable
-fdiagnostics-show-option by default.
Apparently HIPToolChain does not subclass from AMDGPUToolChain, so
this was not applying the new denormal attributes. I'm not sure why
this doesn't subclass. Just copy the implementation for now.
Since GlobalISel is maturing and is already on at -O0 for AArch64, it's not
completely "experimental". Create a more appropriate driver flag and make
the older option an alias for it.
Differential Revision: https://reviews.llvm.org/D77103
Currently -fno-unroll-loops is ignored when doing LTO on Darwin. This
patch adds a new -lto-no-unroll-loops option to the LTO code generator
and forwards it to the linker if -fno-unroll-loops is passed.
Reviewers: thegameg, steven_wu
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D76916
There was a misisng space between the -march and --cuda-gpu-arch
arguments, so --cuda-gpu-arch wasn't actually being parsed. I'm not
sure what the intent of the sm_10 run lines were, but they error as an
unsupported architecture. Switch these to something else.
Summary:
This patch introduces command-line support for the Armv8.6-a architecture and assembly support for BFloat16. Details can be found
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
in addition to the GCC patch for the 8..6-a CLI:
https://gcc.gnu.org/legacy-ml/gcc-patches/2019-11/msg02647.html
In detail this patch
- march options for armv8.6-a
- BFloat16 assembly
This is part of a patch series, starting with command-line and Bfloat16
assembly support. The subsequent patches will upstream intrinsics
support for BFloat16, followed by Matrix Multiplication and the
remaining Virtualization features of the armv8.6-a architecture.
Based on work by:
- labrinea
- MarkMurrayARM
- Luke Cheeseman
- Javed Asbar
- Mikhail Maltsev
- Luke Geeson
Reviewers: SjoerdMeijer, craig.topper, rjmccall, jfb, LukeGeeson
Reviewed By: SjoerdMeijer
Subscribers: stuij, kristof.beyls, hiraditya, dexonsmith, danielkiss, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D76062
The argument after -Xarch_device will be added to the arguments for CUDA/HIP
device compilation and will be removed for host compilation.
The argument after -Xarch_host will be added to the arguments for CUDA/HIP
host compilation and will be removed for device compilation.
Differential Revision: https://reviews.llvm.org/D76520
On Windows, when the LLVM toolchain is in the current path (%PATH%), fusing the linker yields c:\{path}\lld.exe whereas the hip tests did not expect the .exe part.
This only happens if LLD is not present in the build folder, which consequently makes the code in Driver::GetProgramPath() to fall back to %PATH% and platform-specific search, which includes the .exe part (see https://github.com/llvm/llvm-project/blob/master/clang/lib/Driver/Driver.cpp#L4733).
Differential Revision: https://reviews.llvm.org/D76631
Passing small data limit to RISCVELFTargetObjectFile by module flag,
So the backend can set small data section threshold by the value.
The data will be put into the small data section if the data smaller than
the threshold.
Differential Revision: https://reviews.llvm.org/D57497
HIPToolChain::TranslateArgs call TranslateArgs of host toolchain with
the input args to get a list of derived args called DAL, then
go through the input args by itself and append them to DAL.
This assumes that the host toolchain should not append any unchanged
args to DAL, otherwise there will be duplicates since
HIPToolChain will append it again.
This works for GNU toolchain since it returns an empty list for DAL.
However, MSVC toolchain will append unchanged args to DAL, which
causes duplicate args.
This patch let MSVC toolchain not append unchanged args for HIP
offloading kind, which fixes this issue.
Differential Revision: https://reviews.llvm.org/D76032
This flag is used by avr-gcc (starting with v10) to set the width of the
double type. The double type is by default interpreted as a 32-bit
floating point number in avr-gcc instead of a 64-bit floating point
number as is common on other architectures. Starting with GCC 10, a new
option has been added to control this behavior:
https://gcc.gnu.org/wiki/avr-gcc#Deviations_from_the_Standard
This commit keeps the default double at 32 bits but adds support for the
-mdouble flag (-mdouble=32 and -mdouble=64) to control this behavior.
Differential Revision: https://reviews.llvm.org/D76181
- libclang_rt.profile should be added when -fcs-profile-generate is on thecommand line.
- OPT_fno_profile_instr_generate was used as a negative for OPT_fprofile_generate. Fix it to use OPT_fno_profile_generate.
Differential Revision: https://reviews.llvm.org/D75274
Summary:
Run StackSafetyAnalysis at the end of the IR pipeline and annotate
proven safe allocas with !stack-safe metadata. Do not instrument such
allocas in the AArch64StackTagging pass.
Reviewers: pcc, vitalybuka, ostannard
Reviewed By: vitalybuka
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, gilang, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73513
This fixes an issue with clang issuing a warning about unknown CUDA SDK if it's
detected during non-CUDA compilation.
Differential Revision: https://reviews.llvm.org/D76030
Device-side compilation does not support some features and we need to
filter them out when command line options enable them for the host.
We're already doing this in various places in the regular clang driver,
but clang-cl mode constructs cc1 options independently and needs to
implement the filtering, too.
Differential Revision: https://reviews.llvm.org/D75310
After a first attempt to fix the test-suite failures, my first recommit
caused the same failures again. I had updated CMakeList.txt files of
tests that needed -fcommon, but it turns out that there are also
Makefiles which are used by some bots, so I've updated these Makefiles
now too.
See the original commit message for more details on this change:
0a9fc9233e
This includes fixes for:
- test-suite: some benchmarks need to be compiled with -fcommon, see D75557.
- compiler-rt: one test needed -fcommon, and another a change, see D75520.
Summary:
User can select the version of SYCL the compiler will
use via the flag -sycl-std, similar to -cl-std.
The flag defines the LangOpts.SYCLVersion option to the
version of SYCL. The default value is undefined.
If driver is building SYCL code, flag is set to the default SYCL
version (1.2.1)
The preprocessor uses this variable to define CL_SYCL_LANGUAGE_VERSION macro,
which should be defined according to SYCL 1.2.1 standard.
Only valid value at this point for the flag is 1.2.1.
Co-Authored-By: David Wood <Q0KPU0H1YOEPHRY1R2SN5B5RL@david.davidtw.co>
Signed-off-by: Ruyman Reyes <ruyman@codeplay.com>
Subscribers: ebevhan, Anastasia, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D72857
This reverts commit 737394c490.
The fp-model test was failing on platforms that enable denormal flushing
based on -ffast-math. This needs to reset to IEEE, not the default in
these cases.
Change-Id: Ibbad32f66d0d0b89b9c1173a3a96fb1a570ddd89
The IR hasn't switched the default yet, so explicitly add the ieee
attributes.
I'm still not really sure how the target default denormal mode should
interact with -fno-unsafe-math-optimizations. The target may have
selected the default mode to be non-IEEE based on the flags or based
on its true behavior, but we don't know which is the case. Since the
only users of a non-IEEE mode without a flag still support IEEE mode,
just reset to IEEE.
Lower priority of __tgt_register_lib in order to make sure that __tgt_register_requires is called before loading a libomptarget plugin.
We want to know beforehand which requirements the user has asked for so that upon loading the plugin libomptarget can report how many devices there are that can satisfy these requirements.
Differential Revision: https://reviews.llvm.org/D75223
Pickup the default crt and libs when the target is musl.
Resubmitting after updating the testcase.
Differential Revision: https://reviews.llvm.org/D75139
Hans Wennborg