Add a new CMake file to expand on for more problematic configurations
in the future.
Related to #54645
Reviewed By: beanz, phosek, smeenai
Differential Revision: https://reviews.llvm.org/D123777
If libcurl was built with CMake, CMake's FindCURL module defers
completely to the included config file. This config file doesn't set any
of the variables that the current check script depends on; it just sets
up an imported CMake target. Accordingly, the smoke test fails, since it
can't find the libcurl (or its static dependencies).
This changes the compile smoke test to refer to the imported library
instead; this should in turn bring in the necessary include and library
directories via the interface properties set up by CMake. This better
mirrors the way libcurl is referred to elsewhere in the CMakeLists.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D121718
Remove the dependency on ounit2 and the relevant lit code. It seems
that ounit2 is not used at all and all OCaml binding tests pass without
it installed.
Thanks for Shiwei Weng and Josh Berdine for bringing this to
my attention.
Differential Revision: https://reviews.llvm.org/D119884
Apparently modern versions of ounit2 can only be found as "ounit2"
rather than "oUnit" version 2. Update the CMake check to support both
variants. This makes the OCaml tests run again with ounit2-2.2.4.
Differential Revision: https://reviews.llvm.org/D119079
* Use `MATCHES` so that `Ninja Multi-Config` generator also satisfies the Ninja check
* Pull out a couple of values into variables, inside `function(tablegen project ofn)`, NFC
Differential Revision: https://reviews.llvm.org/D118100
This reverts 3816c53f04 and removes follow-up
fixups.
The original intention was to show error earlier (posix_fallocate time) than
later for ld.lld but it appears to cause some problems which make it not free.
* FreeBSD ZFS: EINVAL, not too bad.
* FreeBSD UFS: according to khng "devastatingly slow on freebsd because UFS on freebsd does not have preallocation support like illumos. It zero-fills."
* NetBSD: maybe EOPNOTSUPP
* Linux tmpfs: unless tmpfs is set up to use huge pages (requires CONFIG_TRANSPARENT_HUGE_PAGECACHE=y), I can consistently demonstrate ~300ms delay for a 1.4GiB output.
* Linux ext4: I don't measure any benefit, either backed by a hard disk or by a file in tmpfs.
* The current code organization of `defined(HAVE_POSIX_FALLOCATE)` costs us a macro dispatch for AIX.
I think we should just remove it. I think if posix_fallocate ever finds demonstrable benefit,
it is likely Linux specific and will not need HAVE_POSIX_FALLOCATE, and possibly opt-in by some specific programs.
In a filesystem with CoW and compression, the ENOSPC benefit may be lost as well.
Reviewed By: khng300
Differential Revision: https://reviews.llvm.org/D115957
Improves cross-distro portability of LLVM cmake package by resolving paths for
terminfo and libffi via import targets.
When LLVMExports.cmake is generated for installation, it contains absolute
library paths which are likely to be a common cause of portability issues. To
mitigate this, the discovery logic for these dependencies is refactored into
find modules which get installed alongside LLVMConfig.cmake. The result is
cleaner, cmake-friendly management of these dependencies that respect the
environment of the LLVM package importer.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D114327
The xar file format has been deprecated since macOS 12.0, causing a
warning to be printed:
warning: 'xar_open' is deprecated: first deprecated in macOS 12.0 -
xar is a deprecated file format and should not be used.
Disable xar support when the macosx deployment target is greater or
equal to 12.0.
Differential revision: https://reviews.llvm.org/D112849
This finds the curl libraries if LLVM_ENABLE_CURL is set. This is needed
to implement the debuginfod client library in LLVM.
Patch By: noajshu
Differential Revision: https://reviews.llvm.org/D111238
This updates llvm/utils/sysroot.py to include the "DIA SDK" folder in the
sysroot.
It also updates the build to look for the DIA SDK there if a sysroot is set.
This requires moving LLVM_WINSYSROOT to config-ix.cmake.
For the GN build, I chose to pass a qualified path to diaguids in libs instead
of pushing a config with a `/libpath:` flag. The former requires a GN with
https://gn-review.googlesource.com/c/gn/+/12200, the latter requires D109624.
The former is more like the cmake build, arguably a bit simpler, and it's
easier to check for the wrong GN revision and easier to update GN.
Differential Revision: https://reviews.llvm.org/D109708
At least as of CMake 3.20.3, the CMake platform file for Linux doesn't
define the file type prefix and suffix variables, relying on them being
implicitly empty when they're unset. If we're cross-compiling targeting
Windows on a Linux machine, the values of these prefixes and suffixes
populated by the Windows platform file will still be set after including
the Linux platform file, so we'll incorrectly assume the ".exe" suffix
for the host machine. Explicitly unset the variables before including
the platform file, to prevent any previous values from leaking. Thanks
@beanz for suggesting the fix.
Reviewed By: beanz
Differential Revision: https://reviews.llvm.org/D108473
After some moment VS solution generated with LLVM_OPTIMIZED_TABLEGEN started to
generate all .inc files for each build. The reason was it had
"<path to native tablegen>/llvm-tblgen" without .exe as a dependency.
Differential Revision: https://reviews.llvm.org/D107898
libgcc and libunwind have different flavours of __register_frame. Both
flavours are already correctly handled, except that the code to handle
the libunwind flavour is guarded by __APPLE__. This change uses the
presence of __unw_add_dynamic_fde in libunwind instead to detect whether
libunwind is used, rather than hardcoding it as Apple vs. non-Apple.
Fixes PR44074.
Thanks to Albert Jin <albert.jin@gmail.com> and Chris Schafmeister
<chris.schaf@verizon.net> for identifying the problem.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D106129
Currently when linking LLVM against Libxml2, a simple check is performed to check whether it can be linked successfully. This check currently adds the include directories and the libraries for libxml2, but not definitions found by the config.
This causes issues on Windows when trying to link against a static libxml2. Libxml2 requires LIBXML_STATIC to be defined in the preprocessor to be able to link statically. This definition is put into LIBXML2_DEFINITIONS in the cmake config, but not properly forwarded to check_symbol_exists leading to it failing as it could not find xmlReadMemory in a DLL.
This patch simply appends the content of LIBXML2_DEFINITIONS to the symbol check definitions, fixing the issue.
Differential Revision: https://reviews.llvm.org/D106740
lld/MachO/Driver.cpp and lld/MachO/SyntheticSections.cpp include
llvm/Config/config.h which doesn't exist when building standalone lld.
This patch replaces llvm/Config/config.h include with llvm/Config/llvm-config.h
just like it is in lld/ELF/Driver.cpp and HAVE_LIBXAR with LLVM_HAVE_LIXAR and
moves LLVM_HAVE_LIBXAR from config.h to llvm-config.h
Also it adds LLVM_HAVE_LIBXAR to LLVMConfig.cmake and links liblldMachO2.so
with XAR_LIB if LLVM_HAVE_LIBXAR is set.
Differential Revision: https://reviews.llvm.org/D102084
As suggested by Nico in https://reviews.llvm.org/D96049, move check for libproc
from CMakeLists to config-ix.cmake
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D96713
Note: Also removes the CMAKE_REQUIRED_LIBRARIES which doesn't appear to
be necessary.
glibc deprecates `mallinfo` in the latest version of 2.33. This patch replaces the usage of `mallinfo` with the new `mallinfo2` when it's available.
Reviewed By: lattner
Differential Revision: https://reviews.llvm.org/D96359
LLVM_TARGETS_TO_BUILD accepts both "host" or "Native" for auto-selecting
the target from the environment. However the way "Native" was plumbed
would lead to the JIT environment being disabled. This patch is making
"Native" works just as "host".
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D95837
Revert "Delete llvm::is_trivially_copyable and CMake variable HAVE_STD_IS_TRIVIALLY_COPYABLE"
This reverts commit 4d4bd40b57.
This reverts commit 557b00e0af.
GCC<5 did not support std::is_trivially_copyable. Now LLVM builds
require 5.1 we can delete llvm::is_trivially_copyable after the users
have been migrated to std::is_trivially_copyable.
The macro HAVE_EHTABLE_SUPPORT is used by parts of ExecutionEngine to tell __register_frame/__deregister_frame is available to register the
FDE for a generated (JIT) code. It's currently set by a slowly growing set of macro tests in the respective headers, which is updated now and then when it fails to link on some platform or another due to the symbols being missing (see for example https://bugs.llvm.org/show_bug.cgi?id=5715).
This change converts the macro in two HAVE_(DE)REGISTER_FRAME config.h macros (like most of the other HAVE_* macros) and set's them based on whether CMake can actually find a definition for these symbols to link to at configuration time.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D87114
This ensures that required includes and libraries such as -lm that
were added earlier aren't overwritten.
Differential Revision: https://reviews.llvm.org/D88068
This matches the changes made to handling of zlib done in 10b1b4a
where we rely on find_package and the imported target rather than
manually appending the library and include paths. The use of
LLVM_LIBXML2_ENABLED has been replaced by LLVM_ENABLE_LIBXML2
thus reducing the number of variables.
Differential Revision: https://reviews.llvm.org/D84563
Currently it is hard to avoid having LLVM link to the system install of
ncurses, since it uses check_library_exists to find e.g. libtinfo and
not find_library or find_package.
With this change the ncurses lib is found with find_library, which also
considers CMAKE_PREFIX_PATH. This solves an issue for the spack package
manager, where we want to use the zlib installed by spack, and spack
provides the CMAKE_PREFIX_PATH for it.
This is a similar change as https://reviews.llvm.org/D79219, which just
landed in master.
Patch By: haampie
Differential Revision: https://reviews.llvm.org/D85820
The introduction of find_library for ncurses caused more issues than it solved problems. The current open issue is it makes the static build of LLVM fail. It is better to revert for now, and get back to it later.
Revert "[CMake] Fix an issue where get_system_libname creates an empty regex capture on windows"
This reverts commit 1ed1e16ab8.
Revert "Fix msan build"
This reverts commit 34fe9613dd.
Revert "[CMake] Always mark terminfo as unavailable on Windows"
This reverts commit 76bf26236f.
Revert "[CMake] Fix OCaml build failure because of absolute path in system libs"
This reverts commit 8e4acb82f7.
Revert "[CMake] Don't look for terminfo libs when LLVM_ENABLE_TERMINFO=OFF"
This reverts commit 495f91fd33.
Revert "Use find_library for ncurses"
This reverts commit a52173a3e5.
Differential revision: https://reviews.llvm.org/D86521
The non-standard header file `<sysexits.h>` provides some return values.
`EX_IOERR` is used to as a special value to signal a broken pipe to the clang driver.
On z/OS Unix System Services, this header file does not exists. This patch
- adds a check for `<sysexits.h>`, removing the dependency on `LLVM_ON_UNIX`
- adds a new header file `llvm/Support/ExitCodes`, which either includes
`<sysexits.h>` or defines `EX_IOERR`
- updates the users of `EX_IOERR` to include the new header file
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D83472
D85820 introduced a bug where LLVM_ENABLE_TERMINFO was set to true when
the library was found, even when the user had set
-DLLVM_ENABLE_TERMINFO=OFF.
Patch By: haampie
Differential Revision: https://reviews.llvm.org/D86173
Currently it is hard to avoid having LLVM link to the system install of
ncurses, since it uses check_library_exists to find e.g. libtinfo and
not find_library or find_package.
With this change the ncurses lib is found with find_library, which also
considers CMAKE_PREFIX_PATH. This solves an issue for the spack package
manager, where we want to use the zlib installed by spack, and spack
provides the CMAKE_PREFIX_PATH for it.
This is a similar change as https://reviews.llvm.org/D79219, which just
landed in master.
Differential revision: https://reviews.llvm.org/D85820
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
This quietly disabled use of zlib on Windows even when building with
-DLLVM_ENABLE_ZLIB=FORCE_ON.
> Rather than handling zlib handling manually, use find_package from CMake
> to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
> HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
> set to YES, which requires the distributor to explicitly select whether
> zlib is enabled or not. This simplifies the CMake handling and usage in
> the rest of the tooling.
>
> This is a reland of abb0075 with all followup changes and fixes that
> should address issues that were reported in PR44780.
>
> Differential Revision: https://reviews.llvm.org/D79219
This reverts commit 10b1b4a231 and follow-ups
64d99cc6ab and
f9fec0447e.
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
Rather than handling zlib handling manually, use find_package from CMake
to find zlib properly. Use this to normalize the LLVM_ENABLE_ZLIB,
HAVE_ZLIB, HAVE_ZLIB_H. Furthermore, require zlib if LLVM_ENABLE_ZLIB is
set to YES, which requires the distributor to explicitly select whether
zlib is enabled or not. This simplifies the CMake handling and usage in
the rest of the tooling.
This is a reland of abb0075 with all followup changes and fixes that
should address issues that were reported in PR44780.
Differential Revision: https://reviews.llvm.org/D79219
On Apple platforms, linking against libSystem.dylib is sufficient, and
some Apple platforms don't provide libm.dylib. On those platforms, adding
-lm to CMAKE_REQUIRED_LIBRARIES causes all subsequent compile-flag checks
to fail due to the missing library.
Differential Revision: https://reviews.llvm.org/D81265
This is primarily motivated by the desire to move from Python2 to
Python3. `PYTHON_EXECUTABLE` is ambiguous. This explicitly identifies
the python interpreter in use. Since the LLVM build seems to be able to
completed successfully with python3, use that across the build. The old
path aliases `PYTHON_EXECUTABLE` to be treated as Python3.
Tobias Hieta