Currently we have special handling for local lldbinit files in the
driver. At the same time, we have an SB API named
`SourceInitFileInCurrentWorkingDirectory` that does the same thing.
This patch removes the special handling from the driver and uses the API
instead. In addition to the obvious advantages of having one canonical
way of doing things and removing code duplication, this change also
means that the code path is the same for global and local lldb init
files.
Differential revision: https://reviews.llvm.org/D61577
llvm-svn: 360077
This patch makes `re` an alias for `register`. Currently `re<TAB>` gives
you the choice between `register` and `reproducer`. Given that you use
`register` a lot more often, it should win for the common substring.
Differential revision: https://reviews.llvm.org/D61469
llvm-svn: 359927
You can only find out about this useful customization by browsing
the settings list output or the llvm.org web pages. Mention it
in the help for thread list, thread backtrace & _regex_bt commands
to make it more discoverable.
llvm-svn: 359752
This is part two of the change started in r359330. This patch moves the
ownership of the script interpreter from the command interpreter into
the debugger. I would've preferred to remove the lazy initialization,
however the fact that the scripting language is set after the debugger
is created makes that tricky. So for now this does exactly the same
thing as when it was under the command interpreter. The result is that
this patch is fully NFC.
Differential revision: https://reviews.llvm.org/D61211
llvm-svn: 359354
The script language argument was passed from the debugger to the command
interpreter, only to call SetScriptLanguage on the debugger again. It
wasn't even used to initialize the script interpreter, because that
would query the debugger again. This patch removes the needless back and
forth.
llvm-svn: 359346
As discussed in D61090, there's no good reason for the script
interpreter to depend on the command interpreter. When looking at the
code, it becomes clear that we mostly use the command interpreter as a
way to access the debugger. Hence, it makes more sense to just pass that
to the script interpreter directly.
This is part 1 out of 2. I have another patch in the pipeline that
changes the ownership of the script interpreter to the debugger as well,
but I didn't get around to finish that today.
Differential revision: https://reviews.llvm.org/D61172
llvm-svn: 359330
Before a Debugger gets a Target, target settings are routed to a global set
of settings. Even without this, some part of the LLDB which exist independently
of the Debugger object (the Module cache, the Symbol vendors, ...) access
directly the global default store for those settings.
Of course, if you modify one of those global settings while they are being read,
bad things happen. We see this quite a bit with FileSpecList settings. In
particular, we see many cases where one debug session changes
target.exec-search-paths while another session starts up and it crashes when
one of those accesses invalid FileSpecs.
This patch addresses the specific FileSpecList issue by adding locking to
OptionValueFileSpecList and never returning by reference.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D60468
llvm-svn: 359028
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
For a single char argument, find_first_of is equal to find and
find_last_of is equal to rfind. While playing around with the plugin
stuff this caused an export failure because it always got inlined except
once, which resulted in an undefined symbol.
llvm-svn: 357198
My apologies for the large patch. With the exception of ConstString.h
itself it was entirely produced by sed.
ConstString has exactly one const char * data member, so passing a
ConstString by reference is not any more efficient than copying it by
value. In both cases a single pointer is passed. But passing it by
value makes it harder to accidentally return the address of a local
object.
(This fixes rdar://problem/48640859 for the Apple folks)
Differential Revision: https://reviews.llvm.org/D59030
llvm-svn: 355553
This patch adds the necessary logic to capture and replay commands
entered into the command interpreter. A DataRecorder shadows the input
and writes its data to a know file. During replay this file is used as
the command interpreter's input.
It's possible to the command interpreter more than once, with a
different input source. We support this scenario by using multiple
buffers. The synchronization for this takes place at the SB layer, where
we create a new recorder every time the debugger input is changed.
During replay we use the corresponding buffer as input.
Differential revision: https://reviews.llvm.org/D58564
llvm-svn: 355249
The `ap` suffix is a remnant of lldb's former use of auto pointers,
before they got deprecated. Although all their uses were replaced by
unique pointers, some variables still carried the suffix.
In r353795 I removed another auto_ptr remnant, namely redundant calls to
::get for unique_pointers. Jim justly noted that this is a good
opportunity to clean up the variable names as well.
I went over all the changes to ensure my find-and-replace didn't have
any undesired side-effects. I hope I didn't miss any, but if you end up
at this commit doing a git blame on a weirdly named variable, please
know that the change was unintentional.
llvm-svn: 353912
Unlike std::make_unique, which is only available since C++14,
std::make_shared is available since C++11. Not only is std::make_shared
a lot more readable compared to ::reset(new), it also performs a single
heap allocation for the object and control block.
Differential revision: https://reviews.llvm.org/D57990
llvm-svn: 353764
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
LLVM added wrappers to std::sort (r327219) that randomly shuffle the
container before sorting. The goal is to uncover non-determinism due to
undefined sorting order of objects having the same key.
This can be enabled with -DLLVM_ENABLE_EXPENSIVE_CHECKS=ON.
llvm-svn: 350679
Simplify some code in PreprocessCommand. This change improves
consistency, reduces the indentation and makes the code easier to follow
overall.
llvm-svn: 350166
Using compare is verbose, bug prone and potentially inefficient (because
of early termination). Replace relevant call sites with the (in)equality
operator.
llvm-svn: 349972
This patch simplifies boolean expressions acorss LLDB. It was generated
using clang-tidy with the following command:
run-clang-tidy.py -checks='-*,readability-simplify-boolean-expr' -format -fix $PWD
Differential revision: https://reviews.llvm.org/D55584
llvm-svn: 349215
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
This moves construction of data buffers into the FileSystem class. Like
some of the previous refactorings we don't translate the path yet
because the functionality hasn't been landed in LLVM yet.
Differential revision: https://reviews.llvm.org/D54272
llvm-svn: 346598
This patch modifies how we open File instances in LLDB. Rather than
passing a path or FileSpec to the constructor, we now go through the
virtual file system. This is needed in order to make things work with
the VFS in the future.
Differential revision: https://reviews.llvm.org/D54020
llvm-svn: 346049
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
This patch removes the Exists method from FileSpec and updates its uses
with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53845
llvm-svn: 345854
This patch extends the FileSystem class with a bunch of functions that
are currently implemented as methods of the FileSpec class. These
methods will be removed in future commits and replaced by calls to the
file system.
The new functions are operated in terms of the virtual file system which
was recently moved from clang into LLVM so it could be reused in lldb.
Because the VFS is stateful, we turned the FileSystem class into a
singleton.
Differential revision: https://reviews.llvm.org/D53532
llvm-svn: 345783
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345693
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345686
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345678
For the reproducer feature I need to be able to export and import the
current LLDB configuration. To realize this I've extended the existing
functionality to print settings. With the help of a new formatting
option, we can now write the settings and their values to a file
structured as regular commands.
Concretely the functionality works as follows:
(lldb) settings export -f /path/to/file
This file contains a bunch of settings set commands, followed by the
setting's name and value.
...
settings set use-external-editor false
settings set use-color true
settings set auto-one-line-summaries true
settings set auto-indent true
...
You can import the settings again by either sourcing the file or using
the settings read command.
(lldb) settings read -f /path/to/file
Differential revision: https://reviews.llvm.org/D52651
llvm-svn: 345346
Summary:
Add settings to control command echoing:
```
(lldb) settings set interpreter.echo-commands true
(lldb) settings set interpreter.echo-comment-commands true
```
Both settings default to true, which keeps LLDB's existing behavior in non-interactive mode (echo all command inputs to the output).
So far the only way to change this behavior was the `--source-quietly` flag, which disables all output including evaluation results.
Now `echo-commands` allows to turn off echoing for commands, while evaluation results are still printed. No effect if `--source-quietly` was present.
`echo-comment-commands` allows to turn off echoing for commands in case they are pure comment lines. No effect if `echo-commands` is false.
Note that the behavior does not change immediately! The new settings take effect only with the next command source.
LLDB lit test are the main motivation for this feature. So far incoming `#CHECK` line have always been echoed to the output and so they could never fail. Now we can disable it in lit-lldb-init.
Todos: Finish test for this feature. Add to lit-lldb-init. Check for failing lit tests.
Reviewers: aprantl, jasonmolenda, JDevlieghere
Subscribers: friss, lldb-commits
Differential Revision: https://reviews.llvm.org/D52788
llvm-svn: 343859
Currently we reject our own default disassembly-format string because it
contains two backticks which causes everything in between to be
interpreter as an expression by the command interpreter. This patch
fixes that by escaping backticks when dumping format strings.
llvm-svn: 343471
Summary:
This patch adds a framework for adding descriptions to the command completions we provide.
It also adds descriptions for completed top-level commands so that we can test this code.
Completions are in general supposed to be displayed alongside the completion itself. The descriptions
can be used to provide additional information about the completion to the user. Examples for descriptions
are function signatures when completing function calls in the expression command or the binary name
when providing completion for a symbol.
There is still some boilerplate code from the old completion API left in LLDB (mostly because the respective
APIs are reused for non-completion related purposes, so the CompletionRequest doesn't make sense to be
used), so that's why I still had to change some function signatures. Also, as the old API only passes around a
list of matches, and the descriptions are for these functions just another list, I had to add some code that
essentially just ensures that both lists are always the same side (e.g. all the manual calls to
`descriptions->AddString(X)` below a `matches->AddString(Y)` call).
The initial command descriptions that come with this patch are just reusing the existing
short help that is already added in LLDB.
An example completion with descriptions looks like this:
```
(lldb) pl
Available completions:
platform -- Commands to manage and create platforms.
plugin -- Commands for managing LLDB plugins.
```
Reviewers: #lldb, jingham
Reviewed By: #lldb, jingham
Subscribers: jingham, JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D51175
llvm-svn: 342181
These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall code layering (although it still does not break any particular
dependency completely).
The XCode project will need to be updated after this change.
Differential Revision: https://reviews.llvm.org/D49740
llvm-svn: 339127
Summary:
We usually don't have trailing newlines in the short help strings. This just adds
unnecessary extra lines when printing the help text of these commands.
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D50015
llvm-svn: 338311
Summary:
We currently allow any completion handler to read and manipulate the list of matches we
calculated so far. This leads to a few problems:
Firstly, a completion handler's logic can now depend on previously calculated results
by another handlers. No completion handler should have such an implicit dependency,
but the current API makes it likely that this could happen (or already happens). Especially
the fact that some completion handler deleted all previously calculated results can mess
things up right now.
Secondly, all completion handlers have knowledge about our internal data structures with
this API. This makes refactoring this internal data structure much harder than it should be.
Especially planned changes like the support of descriptions for completions are currently
giant patches because we have to refactor every single completion handler.
This patch narrows the contract the CompletionRequest has with the different handlers to:
1. A handler can suggest a completion.
2. A handler can ask how many suggestions we already have.
Point 2 obviously means we still have a dependency left between the different handlers, but
getting rid of this is too large to just append it to this patch.
Otherwise this patch just completely hides the internal StringList to the different handlers.
The CompletionRequest API now also ensures that the list of completions is unique and we
don't suggest the same value multiple times to the user. This property has been so far only
been ensured by the `Option` handler, but is now applied globally. This is part of this patch
as the OptionHandler is no longer able to implement this functionality itself.
Reviewers: jingham, davide, labath
Reviewed By: davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D49322
llvm-svn: 338151
Summary:
So far lldb is printing this when it finds an ambiguous command:
```
(lldb) g
Ambiguous command 'g'. Possible matches:
gdb-remote
gui
gdb-remote
gui
```
The duplicates come from the fact that we call the same query twice with the same parameters
and add it to the same list. This patch just removes the second query call to `GetCommandObject`.
As `GetCommandObject` is const and the name parameter is also not modified, this shouldn't break
anything else. I didn't merge the remaining if statement into the else as I think otherwise the
`if obj==nullptr do X else Y` pattern in there becomes hard to recognize.
Reviewers: davide
Reviewed By: davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D49866
llvm-svn: 338043
Summary:
We always print two error messages when we hit an unknown command. As the function
`CommandInterpreter::HandleCommand` that prints the second error message unconditionally called the `CommandInterpreter::ResolveCommandImpl` before (which prints the first error message), we can just remove
that second error message.
Fixes https://bugs.llvm.org/show_bug.cgi?id=38312
Reviewers: labath
Reviewed By: labath
Subscribers: labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D49831
llvm-svn: 338040
Jonas Devlieghere