When disassembling with -D, skip virtual sections by printing "..." for
each symbol.
This patch also implements `MachOObjectFile::isSectionVirtual`.
Test case comes from:
```
.zerofill __DATA,__common,_data64unsigned,472,3
```
Differential Revision: https://reviews.llvm.org/D45824
llvm-svn: 330342
Summary:
Instead of manually invoking PrintStatistics, simply invoke
llvm_shutdown which will take care of destroying managed statics, and as
a side effect will destroy the StatisticInfo ManagedStatic, invoking
PrintStatistics when needed.
Reviewers: fhahn
Subscribers: inglorion, llvm-commits
Differential Revision: https://reviews.llvm.org/D45820
llvm-svn: 330341
The DBI stream contains a list of module descriptors. At the
beginning of each descriptor is a structure representing the first
section contribution in the output file for that module. LLD
currently doesn't fill out this structure at all, but link.exe
does. So as a precursor to emitting this data in LLD, we first
need a way to dump it so that it can be checked.
This patch adds support for the dumping, and verifies via a test
that LLD emits bogus information.
llvm-svn: 330208
If a class's first data member is an instance of an empty class, then an
assertion in the PrettyClassLayoutGraphicalDumper would fail. The
storage is reserved, but it's not marked as in use.
As far as I understand, it's the assertion that's faulty, so I removed it
and updated the nearby comment.
Found by running llvm-pdbutil against its own PDB, and this assertion would
fail on HashAdjusters, which is a HashTable whose first data member is a
TraitsT, which is a PdbHashTraits<T>, which is an empty struct. (The struct
has a specialization for uint32_t, but that specialization doesn't apply
here because the T is actually ulittle32_t.)
Differential Revision: https://reviews.llvm.org/D45645
llvm-svn: 330135
Create convenience functions for printing error, warning and note to
stdout. Previously we had similar functions being used in dsymutil, but
given that this pattern is so common it makes sense to make it available
globally.
llvm-svn: 330091
As demonstrated by the regression tests added in this patch, the
following cases are valid cases:
1. A Function with no DISubprogram attached, but various debug info
related to its instructions, coming, for instance, from an inlined
function, also defined somewhere else in the same module;
2. ... or coming exclusively from the functions inlined and eliminated
from the module entirely.
The ValueMap shared between CloneFunctionInto calls within CloneModule
needs to contain identity mappings for all of the DISubprogram's to
prevent them from being duplicated by MapMetadata / RemapInstruction
calls, this is achieved via DebugInfoFinder collecting all the
DISubprogram's. However, CloneFunctionInto was missing calls into
DebugInfoFinder for functions w/o DISubprogram's attached, but still
referring DISubprogram's from within (case 1). This patch fixes that.
The fix above, however, exposes another issue: if a module contains a
DISubprogram referenced only indirectly from other debug info
metadata, but not attached to any Function defined within the module
(case 2), cloning such a module causes a DICompileUnit duplication: it
will be moved in indirecty via a DISubprogram by DebugInfoFinder first
(because of the first bug fix described above), without being
self-mapped within the shared ValueMap, and then will be copied during
named metadata cloning. So this patch makes sure DebugInfoFinder
visits DICompileUnit's referenced from DISubprogram's as it goes w/o
re-processing llvm.dbg.cu list over and over again for every function
cloned, and makes sure that CloneFunctionInto self-maps
DICompileUnit's referenced from the entire function, not just its own
DISubprogram attached that may also be missing.
The most convenient way of tesing CloneModule I found is to rely on
CloneModule call from `opt -run-twice`, instead of writing tedious
unit tests. That feature has a couple of properties that makes it hard
to use for this purpose though:
1. CloneModule doesn't copy source filename, making `opt -run-twice`
report it as a difference.
2. `opt -run-twice` does the second run on the original module, not
its clone, making the result of cloning completely invisible in opt's
actual output with and without `-run-twice` both, which directly
contradicts `opt -run-twice`s own error message.
This patch fixes this as well.
Reviewed By: aprantl
Reviewers: loladiro, GorNishanov, espindola, echristo, dexonsmith
Subscribers: vsk, debug-info, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45593
llvm-svn: 330069
We have a few functions that virtually all command wants to run on
process startup/shutdown. This patch adds InitLLVM class to do that
all at once, so that we don't need to copy-n-paste boilerplate code
to each llvm command's main() function.
Differential Revision: https://reviews.llvm.org/D45602
llvm-svn: 330046
Normally, the Scheduler prioritizes older instructions over younger instructions
during the instruction issue stage. In one particular case where a dependent
instruction had a schedule read-advance associated to one of the input operands,
this rule was not correctly applied.
This patch fixes the issue and adds a test to verify that we don't regress that
particular case.
llvm-svn: 330032
Summary: This enables debug fission on implicit ThinLTO when linked with gold. It will put the .dwo files in a directory specified by user.
Reviewers: tejohnson, pcc, dblaikie
Reviewed By: pcc
Subscribers: JDevlieghere, mehdi_amini, inglorion
Differential Revision: https://reviews.llvm.org/D44792
llvm-svn: 329988
Summary:
llvm-diff incorrectly reports that there's a diff when input IR contains undef/zeroinitializer/constantvector/indirectbr.
(This happens even if two identical files are given, e.g. `llvm-diff x.ll x.ll`)
This is fix to the bug report https://bugs.llvm.org/show_bug.cgi?id=33623 .
Reviewers: dexonsmith, rjmccall
Reviewed By: rjmccall
Subscribers: chenwj, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D34856
llvm-svn: 329957
Swithces from using the command line library to using TableGen. This will allow
llvm-strip to exist and allow refinements of the command line syntax.
Differential Revision: https://reviews.llvm.org/D44236
llvm-svn: 329863
These aren't the .def style files used in LLVM that require a macro
defined before their inclusion - they're just basic non-modular includes
to stamp out command line flag variables.
llvm-svn: 329840
This patch moves part of the logic that notifies dispatch stall events from the
DispatchUnit to the Scheduler.
The main goal of this patch is to remove (yet another) dependency between the
DispatchUnit and the Scheduler. Before this patch, the DispatchUnit had to know
about `Scheduler::Event` and how to classify stalls due to the lack of scheduling
resources. This patch removes that knowledge and simplifies the logic in
DispatchUnit::checkScheduler.
This is another change done in preparation for the work to fix PR36663.
No functional change intended.
llvm-svn: 329835
This patch moves the logic that collects and analyzes dispatch events to the
DispatchStatistics view.
Added flag -dispatch-stats to print statistics related to the dispatch logic.
llvm-svn: 329708
Summary:
Subtargets can define the libpfm counter names that can be used to
measure cycles and uops issued on ProcResUnits.
This allows making llvm-exegesis available on more targets.
Fixes PR36984.
Reviewers: gchatelet, RKSimon, andreadb, craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45360
llvm-svn: 329675
This patch teaches llvm-mca how to parse code comments in search for special
"markers" used to select regions of code.
Example:
# LLVM-MCA-BEGIN My Code Region
....
# LLVM-MCA-END
The MCAsmLexer now delegates to an object of class MCACommentParser (i.e. an
AsmCommentConsumer) the parsing of code comments to search for begin/end code
region markers.
A comment starting with substring "LLVM-MCA-BEGIN" marks the beginning of a new
region of code. A comment starting with substring "LLVM-MCA-END" marks the end
of the last region.
This implementation doesn't allow regions to overlap. Each region can have a
optional description; internally, each region is identified by a range of source
code locations (SMLoc).
MCInst objects are added to a region R only if the source location for the
MCInst is in the range of locations specified by R.
By default, the tool allocates an implicit "Default" code region which contains
every source location. See new tests llvm-mca-marker-*.s for a few examples.
A new Backend object is created for every region. So, the analysis is conducted
on every parsed code region. The final report is the union of the reports
generated for every code region. Note that empty regions are skipped.
Special "[#] Code Region - ..." strings are used in the report to mark the
portion which is specific to a code region only. For example, see
llvm-mca-markers-5.s.
Differential Revision: https://reviews.llvm.org/D45433
llvm-svn: 329590
Summary:
The option is helpful for large projects where it's not feasible to specify sources which
user would like to see in the report. Instead, it allows to black-list specific sources via
regular expressions (e.g. now it's possible to skip all files that have "test" in its name).
This also partially fixes https://bugs.llvm.org/show_bug.cgi?id=34277
Reviewers: vsk, morehouse, liaoyuke
Reviewed By: vsk
Subscribers: kcc, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D43907
llvm-svn: 329581
With the threading refactoring, loading of object files happens before
checking whether we're dealing with a swift AST. While that's not an
issue per se, it causes a warning to be printed:
warning: /path/to/a.swiftmodule: The file was not recognized as a valid object file
note: while processing /path/to/a.swiftmodule
This suppresses the warning by checking for a Swift AST before
attempting to load is as an object file.
rdar://39240444
llvm-svn: 329553
It was reported that this change measurably regressed -plugin-opt=O3
performance.
There is an ongoing discussion on llvm-dev about the correct way to
set the CG opt level, see thread "[llvm-dev] [RFC] Adding function
attributes to represent codegen optimization level".
llvm-svn: 329458
Summary:
- Add a missing getter for module-level inline assembly
- Add a missing append function for module-level inline assembly
- Deprecate LLVMSetModuleInlineAsm and replace it with LLVMSetModuleInlineAsm2 which takes an explicit length parameter
- Deprecate LLVMConstInlineAsm and replace it with LLVMGetInlineAsm, a function that allows passing a dialect and is not mis-classified as a constant operation
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45346
llvm-svn: 329369
Summary:
Previous code hangs indefinitely when trying to iterate through a
symbol link file that points to an non-exist directory. This change
fixes the bug to make the addCollectedPath function exit ealier and
print out correct warning messages.
Patch by Yuke Liao (@liaoyuke).
Reviewers: Dor1s, vsk
Reviewed By: vsk
Subscribers: bruno, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D44960
llvm-svn: 329338
These appear in a .debug$P section, which is exactly the same in
format as a .debug$T section. So we shouldn't ignore these when
dumping types.
llvm-svn: 329326
Scheduling models can now describe processor register files and retire control
units. This updates the existing documentation and the README file.
llvm-svn: 329311
This patch adds the ability to describe properties of the hardware retire
control unit.
Tablegen class RetireControlUnit has been added for this purpose (see
TargetSchedule.td).
A RetireControlUnit specifies the size of the reorder buffer, as well as the
maximum number of opcodes that can be retired every cycle.
A zero (or negative) value for the reorder buffer size means: "the size is
unknown". If the size is unknown, then llvm-mca defaults it to the value of
field SchedMachineModel::MicroOpBufferSize. A zero or negative number of
opcodes retired per cycle means: "there is no restriction on the number of
instructions that can be retired every cycle".
Models can optionally specify an instance of RetireControlUnit. There can only
be up-to one RetireControlUnit definition per scheduling model.
Information related to the RCU (RetireControlUnit) is stored in (two new fields
of) MCExtraProcessorInfo. llvm-mca loads that information when it initializes
the DispatchUnit / RetireControlUnit (see Dispatch.h/Dispatch.cpp).
This patch fixes PR36661.
Differential Revision: https://reviews.llvm.org/D45259
llvm-svn: 329304
This is done in preparation for D45259.
With D45259, models can specify the size of the reorder buffer, and the retire
throughput directly via tablegen.
llvm-svn: 329274
Summary:
Add a new plugin API. This closes the gap between pass registration and out-of-tree passes for the new PassManager.
Unlike with the existing API, interaction with a plugin is always
initiated from the tools perspective. I.e., when a plugin is loaded, it
resolves and calls a well-known symbol `llvmGetPassPluginInfo` to obtain
details about the plugin. The fundamental motivation is to get rid of as
many global constructors as possible. The API exposed by the plugin
info is kept intentionally minimal.
Reviewers: chandlerc
Reviewed By: chandlerc
Subscribers: bollu, grosser, lksbhm, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D35258
llvm-svn: 329273
Using this, you can use llvm-pdbutil to export the contents of a
stream to a binary file, then run explain on the binary file so
that it treats the offset as an offset into the stream instead
of an offset into a file. This makes it easy to compare the
contents of the same stream from two different files.
llvm-svn: 329207
Summary:
[llvm-exegesis][RFC] Automatic Measurement of Instruction Latency/Uops
This is the code corresponding to the RFC "llvm-exegesis Automatic Measurement of Instruction Latency/Uops".
The RFC is available on the LLVM mailing lists as well as the following document
for easier reading:
https://docs.google.com/document/d/1QidaJMJUyQdRrFKD66vE1_N55whe0coQ3h1GpFzz27M/edit?usp=sharing
Subscribers: mgorny, gchatelet, orwant, llvm-commits
Differential Revision: https://reviews.llvm.org/D44519
llvm-svn: 329156
The DwarfLinker can have some very deep recursion that can max out the
(significantly smaller) stack when using threads. We don't want this
limitation when we only have a single thread. We already have this
workaround for the architecture-related threading. This patch applies
the same workaround to the parallel analysis and cloning.
Differential revision: https://reviews.llvm.org/D45172
llvm-svn: 329093
Before this patch, the "BackendStatistics" view was responsible for printing the
register file usage (as well as many other statistics).
Now users can enable register file usage statistics using the command line flag
`-register-file-stats`. By default, the tool doesn't print register file
statistics.
llvm-svn: 329083
This patch allows the description of register files in processor scheduling
models. This addresses PR36662.
A new tablegen class named 'RegisterFile' has been added to TargetSchedule.td.
Targets can optionally describe register files for their processors using that
class. In particular, class RegisterFile allows to specify:
- The total number of physical registers.
- Which target registers are accessible through the register file.
- The cost of allocating a register at register renaming stage.
Example (from this patch - see file X86/X86ScheduleBtVer2.td)
def FpuPRF : RegisterFile<72, [VR64, VR128, VR256], [1, 1, 2]>
Here, FpuPRF describes a register file for MMX/XMM/YMM registers. On Jaguar
(btver2), a YMM register definition consumes 2 physical registers, while MMX/XMM
register definitions only cost 1 physical register.
The syntax allows to specify an empty set of register classes. An empty set of
register classes means: this register file models all the registers specified by
the Target. For each register class, users can specify an optional register
cost. By default, register costs default to 1. A value of 0 for the number of
physical registers means: "this register file has an unbounded number of
physical registers".
This patch is structured in two parts.
* Part 1 - MC/Tablegen *
A first part adds the tablegen definition of RegisterFile, and teaches the
SubtargetEmitter how to emit information related to register files.
Information about register files is accessible through an instance of
MCExtraProcessorInfo.
The idea behind this design is to logically partition the processor description
which is only used by external tools (like llvm-mca) from the processor
information used by the llvm machine schedulers.
I think that this design would make easier for targets to get rid of the extra
processor information if they don't want it.
* Part 2 - llvm-mca related *
The second part of this patch is related to changes to llvm-mca.
The main differences are:
1) class RegisterFile now needs to take into account the "cost of a register"
when allocating physical registers at register renaming stage.
2) Point 1. triggered a minor refactoring which lef to the removal of the
"maximum 32 register files" restriction.
3) The BackendStatistics view has been updated so that we can print out extra
details related to each register file implemented by the processor.
The effect of point 3. is also visible in tests register-files-[1..5].s.
Differential Revision: https://reviews.llvm.org/D44980
llvm-svn: 329067
This command can dump the binary contents of a stream to a file.
This is useful when you want to do side-by-side comparisons of
a specific stream from two PDBs to examine the differences between
them. You can export both of them to a file, then open them up
side by side in a hex editor (for example), so as to eliminate any
differences that might arise from the contents being on different
blocks in the PDB.
In subsequent patches I plan to improve the "explain" subcommand
so that you can explain the contents of a binary file that isn't
necessarily a full PDB, but one of these dumped streams, by telling
the subcommand how to interpret the contents.
llvm-svn: 329002
Before, the instruction builder incorrectly assumed that only explicit reads
could have been associated with ReadAdvance entries.
This patch fixes the issue and adds a test to verify it.
llvm-svn: 328972
When running dsymutil as part of your build system, it can be desirable
for warnings to be part of the end product, rather than just being
emitted to the output stream. This patch upstreams that functionality.
Differential revision: https://reviews.llvm.org/D44639
llvm-svn: 328965
This patch adds a set of unstable C API bindings to the DIBuilder interface for
creating structure, function, and aggregate types.
This patch also removes the existing implementations of these functions from
the Go bindings and updates the Go API to fit the new C APIs.
llvm-svn: 328953
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: JDevlieghere, zturner, echristo, dberris, friss
Reviewed By: echristo
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D45141
llvm-svn: 328943
Summary:
Previous revision caused a leak in the echo test that got caught by the ASAN bots because of missing free of the handlers array and was reverted in r328759. Resubmitting the patch with that correction.
Add support for cleanupret, catchret, catchpad, cleanuppad and catchswitch and their associated accessors.
Test is modified from SimplifyCFG because it contains many diverse usages of these instructions.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits, vlad.tsyrklevich
Differential Revision: https://reviews.llvm.org/D45100
llvm-svn: 328883
This will show more detail when using `llvm-pdbutil explain` on an
offset in the DBI or PDB streams. Specifically, it will dig into
individual header fields and substreams to give a more precise
description of what the byte represents.
llvm-svn: 328878
As a further refinement on:
r328274 - For llvm-nm and Mach-O files also use function starts info in some cases when printing symbols
we want to special case a redacted LC_MAIN so it is easier to find.
rdar://38978929
llvm-svn: 328820
When we determine that a field belongs to an MSF super block or
the free page map, we wouldn't print any additional information.
With this patch, we now print the value of the field (for super
block fields) or the allocation status of the specified byte (in
the case of offsets in the FPM).
llvm-svn: 328808
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
We emit the new syntax only for DWARF v5 and later.
Fixes the bug found by asan. Also XFAIL the new test for Darwin, which
is stuck on DWARF v2, and fix up other tests so they stop failing on
Windows. Last but not least, don't break "clang -g" of an assembler
file that has .file directives in it.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 328805
Francis Visoiu Mistrih