template methods in JITDylib out-of-line.
This also splits JITDylib::define into a pair of template methods, one taking an
lvalue reference and the other an rvalue reference. This simplifies the
templates at the cost of a small amount of code duplication.
llvm-svn: 342087
construction, a new convenience lookup method, and add-to layer methods.
ExecutionSession now creates a special 'main' JITDylib upon construction. All
subsequently created JITDylibs are added to the main JITDylib's search order by
default (controlled by the AddToMainDylibSearchOrder parameter to
ExecutionSession::createDylib). The main JITDylib's search order will be used in
the future to properly handle cross-JITDylib weak symbols, with the first
definition in this search order selected.
This commit also adds a new ExecutionSession::lookup convenience method that
performs a blocking lookup using the main JITDylib's search order, as this will
be a very common operation for clients.
Finally, new convenience overloads of IRLayer and ObjectLayer's add methods are
introduced that add the given program representations to the main dylib, which
is likely to be the common case.
llvm-svn: 342086
This patch adds support for ORC JIT for mips/mips64 architecture.
In common code $static is changed to __ORCstatic because on MIPS
architecture "$" is a reserved character.
Patch by Luka Ercegovcevic
Differential Revision: https://reviews.llvm.org/D49665
llvm-svn: 341934
The existing memory manager API can not be shared between objects when linking
concurrently (since there is no way to know which concurrent allocations were
performed on behalf of which object, and hence which allocations would be safe
to finalize when finalizeMemory is called). For now, we can work around this by
requiring a new memory manager for each object.
This change only affects the concurrent version of the ORC APIs.
llvm-svn: 341579
Section address mappings can be applied using the RuntimeDyld instance passed to
the RuntimeDyld::MemoryManager::notifyObjectLoaded method. Proving an alternate
route via RuntimeDyldObjectLinkingLayer2 is redundant.
llvm-svn: 341578
Removes the implicit conversion to the underlying type for
JITSymbolFlags::FlagNames and replaces it with some bitwise and comparison
operators.
llvm-svn: 341282
management and materialization responsibility registration.
The setOverrideObjectFlagsWithResponsibilityFlags method instructs
RTDyldObjectlinkingLayer2 to override the symbol flags produced by RuntimeDyld with
the flags provided by the MaterializationResponsibility instance. This can be used
to enable symbol visibility (hidden/exported) for COFF object files, which do not
currently support the SF_Exported flag.
The setAutoClaimResponsibilityForObjectSymbols method instructs
RTDyldObjectLinkingLayer2 to claim responsibility for any symbols provided by a
given object file that were not already in the MaterializationResponsibility
instance. Setting this flag allows higher-level program representations (e.g.
LLVM IR) to be added based on only a subset of the symbols they provide, without
having to write intervening layers to scan and add the additional symbols. This
trades diagnostic quality for convenience however: If all symbols are enumerated
up-front then clashes can be detected and reported early. If this option is set,
clashes for the additional symbols may not be detected until late, and detection
may depend on the flow of control through JIT'd code.
llvm-svn: 341154
The new method name/behavior more closely models the way it was being used.
It also fixes an assertion that can occur when using the new ORC Core APIs,
where flags alone don't necessarily provide enough context to decide whether
the caller is responsible for materializing a given symbol (which was always
the reason this API existed).
The default implementation of getResponsibilitySet uses lookupFlags to determine
responsibility as before, so existing JITSymbolResolvers should continue to
work.
llvm-svn: 340874
The addObjectFile method adds the given object file to the JIT session, making
its code available for execution.
Support for the -extra-object flag is added to lli when operating in
-jit-kind=orc-lazy mode to support testing of this feature.
llvm-svn: 340870
Private symbols are not visible outside the object file, and so not defined by
the object file from ORC's perspective.
No test case yet. Ideally this would be a unit test parsing a checked-in binary,
but I am not aware of any way to reference the LLVM source root from a unit
test.
llvm-svn: 340703
An emitted symbol has had its contents written and its memory protections
applied, but it is not automatically ready to execute.
Prior to ORC supporting concurrent compilation, the term "finalized" could be
interpreted two different (but effectively equivalent) ways: (1) The finalized
symbol's contents have been written and its memory protections applied, and (2)
the symbol is ready to run. Now that ORC supports concurrent compilation, sense
(1) no longer implies sense (2). We have already introduced a new term, 'ready',
to capture sense (2), so rename sense (1) to 'emitted' to avoid any lingering
confusion.
llvm-svn: 340115
VSO was a little close to VDSO (an acronym on Linux for Virtual Dynamic Shared
Object) for comfort. It also risks giving the impression that instances of this
class could be shared between ExecutionSessions, which they can not.
JITDylib seems moderately less confusing, while still hinting at how this
class is intended to be used, i.e. as a JIT-compiled stand-in for a dynamic
library (code that would have been a dynamic library if you had wanted to
compile it ahead of time).
llvm-svn: 340084
MCJIT::getSymbolAddress was handling a non-fatal error condition of JITSymbol
as fatal. JITSymbol::operator bool returns false if no address is available
but no error is set. This can occur e.g. if the symbol name was not found.
Patch by Jascha Wetzel. Thanks Jascha!
llvm-svn: 339809
This code was moved out from BasicObjectLayerMaterializationUnit, which required
the supplied object to be well formed. The getObjectSymbolFlags function does
not require a well-formed object, so we have to propagate the error here.
llvm-svn: 338975
An instance of ReexportsFallbackDefinitionGenerator can be attached to a VSO
(via setFallbackDefinitionGenerator) to re-export symbols on demandy from a
backing VSO.
llvm-svn: 338764
The callable flag can be used to indicate that a symbol is callable. If present,
the symbol is callable. If absent, the symbol may or may not be callable (the
client must determine this by context, for example by examining the program
representation that will provide the symbol definition).
This flag will be used in the near future to enable creation of lazy compilation
stubs based on SymbolFlagsMap instances only (without having to provide
additional information to determine which symbols need stubs).
llvm-svn: 338649
Initially, in https://reviews.llvm.org/D44890, I had these defined as
empty functions inside the header when the respective event listener
was not built in. As done in that commit, that wasn't correct, because
it was a ODR violation. Krasimir hot-fixed that in r333265, but that
wasn't quite right either, because it'd lead to the symbol not being
available.
Instead just move the fallbacksto ExecutionEngineBindings.cpp. Could
define them as static inlines in the header too, but I don't think it
matters.
Reviewers: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49654
llvm-svn: 337930
This new JIT event listener supports generating profiling data for
the linux 'perf' profiling tool, allowing it to generate function and
instruction level profiles.
Currently this functionality is not enabled by default, but must be
enabled with LLVM_USE_PERF=yes. Given that the listener has no
dependencies, it might be sensible to enable by default once the
initial issues have been shaken out.
I followed existing precedent in registering the listener by default
in lli. Should there be a decision to enable this by default on linux,
that should probably be changed.
Please note that until https://reviews.llvm.org/D47343 is resolved,
using this functionality with mcjit rather than orcjit will not
reliably work.
Disregarding the previous comment, here's an example:
$ cat /tmp/expensive_loop.c
bool stupid_isprime(uint64_t num)
{
if (num == 2)
return true;
if (num < 1 || num % 2 == 0)
return false;
for(uint64_t i = 3; i < num / 2; i+= 2) {
if (num % i == 0)
return false;
}
return true;
}
int main(int argc, char **argv)
{
int numprimes = 0;
for (uint64_t num = argc; num < 100000; num++)
{
if (stupid_isprime(num))
numprimes++;
}
return numprimes;
}
$ clang -ggdb -S -c -emit-llvm /tmp/expensive_loop.c -o
/tmp/expensive_loop.ll
$ perf record -o perf.data -g -k 1 ./bin/lli -jit-kind=mcjit /tmp/expensive_loop.ll 1
$ perf inject --jit -i perf.data -o perf.jit.data
$ perf report -i perf.jit.data
- 92.59% lli jitted-5881-2.so [.] stupid_isprime
stupid_isprime
main
llvm::MCJIT::runFunction
llvm::ExecutionEngine::runFunctionAsMain
main
__libc_start_main
0x4bf6258d4c544155
+ 0.85% lli ld-2.27.so [.] do_lookup_x
And line-level annotations also work:
│ for(uint64_t i = 3; i < num / 2; i+= 2) {
│1 30: movq $0x3,-0x18(%rbp)
0.03 │1 38: mov -0x18(%rbp),%rax
0.03 │ mov -0x10(%rbp),%rcx
│ shr $0x1,%rcx
3.63 │ ┌──cmp %rcx,%rax
│ ├──jae 6f
│ │ if (num % i == 0)
0.03 │ │ mov -0x10(%rbp),%rax
│ │ xor %edx,%edx
89.00 │ │ divq -0x18(%rbp)
│ │ cmp $0x0,%rdx
0.22 │ │↓ jne 5f
│ │ return false;
│ │ movb $0x0,-0x1(%rbp)
│ │↓ jmp 73
│ │ }
3.22 │1 5f:│↓ jmp 61
│ │ for(uint64_t i = 3; i < num / 2; i+= 2) {
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D44892
llvm-svn: 337789
deprecating SymbolResolver and AsynchronousSymbolQuery.
Both lookup overloads take a VSO search order to perform the lookup. The first
overload is non-blocking and takes OnResolved and OnReady callbacks. The second
is blocking, takes a boolean flag to indicate whether to wait until all symbols
are ready, and returns a SymbolMap. Both overloads take a RegisterDependencies
function to register symbol dependencies (if any) on the query.
llvm-svn: 337595
This discards the unresolved symbols set and returns the flags map directly
(rather than mutating it via the first argument).
The unresolved symbols result made it easy to chain lookupFlags calls, but such
chaining should be rare to non-existant (especially now that symbol resolvers
are being deprecated) so the simpler method signature is preferable.
llvm-svn: 337594
A search order is a list of VSOs to be searched linearly to find symbols. Each
VSO now has a search order that will be used when fixing up definitions in that
VSO. Each VSO's search order defaults to just that VSO itself.
This is a first step towards removing symbol resolvers from ORC altogether. In
practice symbol resolvers tended to be used to implement a search order anyway,
sometimes with additional programatic generation of symbols. Now that VSOs
support programmatic generation of definitions via fallback generators, search
orders provide a cleaner way to achieve the desired effect (while removing a lot
of boilerplate).
llvm-svn: 337593
delegate method (and unit test).
The name 'replace' better captures what the old delegate method did: it
returned materialization responsibility for a set of symbols to the VSO.
The new delegate method delegates responsibility for a set of symbols to a new
MaterializationResponsibility instance. This can be used to split responsibility
between multiple threads, or multiple materialization methods.
llvm-svn: 336603
Summary:
CompileOnDemandLayer.cpp uses function in these libraries, and builds
with `-DSHARED_LIB=ON` fail without this.
Reviewers: lhames
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D48995
llvm-svn: 336389
writing them to a buffer and re-loading them.
Also introduces a multithreaded variant of SimpleCompiler
(MultiThreadedSimpleCompiler) for compiling IR concurrently on multiple
threads.
These changes are required to JIT IR on multiple threads correctly.
No test case yet. I will be looking at how to modify LLI / LLJIT to test
multithreaded JIT support soon.
llvm-svn: 336385
The verifier identified several modules that were broken due to incorrect
linkage on declarations. To fix this, CompileOnDemandLayer2::extractFunction
has been updated to change decls to external linkage.
llvm-svn: 336150
LLJIT is a prefabricated ORC based JIT class that is meant to be the go-to
replacement for MCJIT. Unlike OrcMCJITReplacement (which will continue to be
supported) it is not API or bug-for-bug compatible, but targets the same
use cases: Simple, non-lazy compilation and execution of LLVM IR.
LLLazyJIT extends LLJIT with support for function-at-a-time lazy compilation,
similar to what was provided by LLVM's original (now long deprecated) JIT APIs.
This commit also contains some simple utility classes (CtorDtorRunner2,
LocalCXXRuntimeOverrides2, JITTargetMachineBuilder) to support LLJIT and
LLLazyJIT.
Both of these classes are works in progress. Feedback from JIT clients is very
welcome!
llvm-svn: 335670
AsynchronousSymbolQuery::canStillFail checks the value of the callback to
prevent sending it redundant error notifications, so we need to reset it after
running it.
llvm-svn: 335664
CompileOnDemandLayer2 is a replacement for CompileOnDemandLayer built on the ORC
Core APIs. Functions in added modules are extracted and compiled lazily.
CompileOnDemandLayer2 supports multithreaded JIT'd code, and compilation on
multiple threads.
llvm-svn: 334967
materializing weak symbols as strong.
This removes some elaborate flag tweaking and plays nicer with RuntimeDyld,
which relies of weak/common flags to determine whether it should emit a given
weak definition. (Switching to strong up-front makes it appear as if there is
already an overriding definition, which would require an extra back-channel to
override).
llvm-svn: 334966