An AArch64 sigreturn trampoline frame can't currently be described
in a DWARF .eh_frame section, because the AArch64 DWARF spec currently
doesn't define a constant for the PC register. (PC and LR may need to
be restored to different values.)
Instead, use the same technique as libgcc or github.com/libunwind and
detect the sigreturn frame by looking for the sigreturn instructions:
mov x8, #0x8b
svc #0x0
If a sigreturn frame is detected, libunwind restores all the GPRs by
assuming that sp points at an rt_sigframe Linux kernel struct. This
behavior is a fallback mode that is only used if there is no ordinary
unwind info for sigreturn.
If libunwind can't find unwind info for a PC, it assumes that the PC is
readable, and would crash if it isn't. This could happen if:
- The PC points at a function compiled without unwind info, and which
is part of an execute-only mapping (e.g. using -Wl,--execute-only).
- The PC is invalid and happens to point to unreadable or unmapped
memory.
In the tests, ignore a failed dladdr call so that the tests can run on
user-mode qemu for AArch64, which uses a stack-allocated trampoline
instead of a vDSO.
Reviewed By: danielkiss, compnerd, #libunwind
Differential Revision: https://reviews.llvm.org/D90898
Summary:
Before this patch, we could only link against the back-deployment libc++abi
dylib. This patch allows linking against the just-built libc++abi, but
running against the back-deployment one -- just like we do for libc++.
Also, add XFAIL markup to flag expected errors.
--export-dynamic is not always available on all targets.
-funwind-tables was a duplicate in the lit.site.cfg.in.
Reviewed By: ldionne
Differential Revision: https://reviews.llvm.org/D90202
This is a massive revert of the following commits (from most revent to oldest):
2b9b7b5775.
529ac3319728270234f169c2087283b5aa67446e5d796645d6
After checking-in the __config_site change, a lot of things started breaking
due to widespread reliance on various aspects of libc++'s build, notably the
fact that we can include the headers from the source tree, but also reliance
on various "internal" CMake variables used by the runtimes build and compiler-rt.
These were unintended consequences of the change, and after two days, we
still haven't restored all the bots to being green. Instead, now that I
understand what specific areas this will blow up in, I should be able to
chop up the patch into smaller ones that are easier to digest.
See https://reviews.llvm.org/D89041 for more details on this adventure.
Prior to this patch, we would generate a fancy <__config> header by
concatenating <__config_site> and <__config>. This complexifies the
build system and also increases the difference between what's tested
and what's actually installed.
This patch removes that complexity and instead simply installs <__config_site>
alongside the libc++ headers. <__config_site> is then included by <__config>,
which is much simpler. Doing this also opens the door to having different
<__config_site> headers depending on the target, which was impossible before.
It does change the workflow for testing header-only changes to libc++.
Previously, we would run `lit` against the headers in libcxx/include.
After this patch, we run it against a fake installation root of the
headers (containing a proper <__config_site> header). This makes use
closer to testing what we actually install, which is good, however it
does mean that we have to update that root before testing header changes.
Thus, we now need to run `ninja check-cxx-deps` before running `lit` by
hand.
This commit was originally applied in 1e46d1aa3 and reverted in eb60c487
because it broke the libc++abi and libunwind test suites. This has now
been fixed.
Differential Revision: https://reviews.llvm.org/D89041
Remove check for standalone and shared library mode in libcxxabi to
allow including tests in said mode. This check prevented running the
tests in standalone mode with static libraries, which is the case for
baremetal targets.
Fix check-unwind target trying to use a non-existent llvm-lit executable
in standalone mode. Copy the HandleOutOfTreeLLVM logic from libcxxabi to
libunwind in order to make the tests work in standalone mode.
Reviewed By: ldionne, #libc_abi, #libc
Differential Revision: https://reviews.llvm.org/D86540
This is needed when running the tests in Freestanding mode, where main()
isn't treated specially. In Freestanding, main() doesn't get mangled as
extern "C", so whatever runtime we're using fails to find the entry point.
One way to solve this problem is to define a symbol alias from __Z4mainiPPc
to _main, however this requires all definitions of main() to have the same
mangling. Hence this commit.
dl_iterate_phdr is used to search for unwind info provided by either
PT_GNU_EH_FRAME or PT_ARM_EXIDX. Most of the code between the two is
the same, so combine them, and factor out what's different into
checkForUnwindInfoSegment.
Details:
- The FrameHeaderCache can now be enabled for ARM EHABI.
- findUnwindSectionsByPhdr now finds the last PT_ARM_EXIDX rather than
the first. There should only be one segment.
- The dso_base and text_segment_length fields of UnwindInfoSections
are now needed for dl_iterate_phdr when using EHABI, to hold the
low and high PC values for a cache entry.
Reviewed By: compnerd, danielkiss, #libunwind, saugustine
Differential Revision: https://reviews.llvm.org/D87880
Unwinding leaf function is useful in cases when the backtrace finds a
leaf function for example when it caused a signal.
This patch also add the support for the DW_CFA_undefined because it marks
the end of the frames.
Ryan Prichard provided code for the tests.
Reviewed By: #libunwind, mstorsjo
Differential Revision: https://reviews.llvm.org/D83573
Reland with limit the test to the x86_64-linux target.
* When .eh_frame is located using .eh_frame_hdr (PT_GNU_EH_FRAME), the
start of .eh_frame is known, but not the size. In this case, the
unwinder must rely on a terminator present at the end of .eh_frame.
Set dwarf_section_length to UINTPTR_MAX to indicate this.
* Add a new field, text_segment_length, that the FrameHeaderCache uses
to track the size of the PT_LOAD segment indicated by dso_base.
* Compute ehSectionEnd by adding sectionLength to ehSectionStart,
never to fdeHint.
Fixes PR46829.
Differential Revision: https://reviews.llvm.org/D87750
Unwinding leaf function is useful in cases when the backtrace finds a
leaf function for example when it caused a signal.
This patch also add the support for the DW_CFA_undefined because it marks
the end of the frames.
Ryan Prichard provided code for the tests.
Reviewed By: #libunwind, mstorsjo
Differential Revision: https://reviews.llvm.org/D83573
The needs of back-deployment testing currently require two different
ways of running the test suite: one based on the deployment target,
and one based on the target triple. Since the triple includes all the
information we need, it's better to have just one way of doing things.
Furthermore, `--param platform=XXX` is also supersedded by using the
target triple. Previously, this parameter would serve the purpose of
controling XFAILs for availability markup errors, however it is possible
to achieve the same thing by using with_system_cxx_lib only and using
.verify.cpp tests instead, as explained in the documentation changes.
The motivation for this change is twofold:
1. This part of the Lit config has always been really confusing and
complicated, and it has been a source of bugs in the past. I have
simplified it iteratively in the past, but the complexity is still
there.
2. The deployment-target detection started failing in weird ways in
recent Clangs, breaking our CI. Instead of band-aid patching the
issue, I decided to remove the complexity altogether by using target
triples even on Apple platforms.
A follow-up to this commit will bring the test suite in line with
the recommended way of handling availability markup tests.
Define a _LIBUNWIND_USE_DL_ITERATE_PHDR macro in config.h when there is
no other unwind info lookup method. Also define a
_LIBUNWIND_USE_DL_UNWIND_FIND_EXIDX macro to factor out
(__BIONIC__ and _LIBUNWIND_ARM_EHABI).
Differential Revision: https://reviews.llvm.org/D86768
Although it works fine with glibc, as currently implemented the
frameheader cache is incompatible with certain platforms with
slightly different locking semantics inside dl_iterate_phdr.
Therefore only enable it when it is turned on explicitly with
a configure-time option.
Differential Revision: https://reviews.llvm.org/D86163
Before this patch the `ninja check-unwind` won't rebuild the unwind library.
Reviewed By: jroelofs
Differential Revision: https://reviews.llvm.org/D85004
As announced on libcxx-dev at [1], the old libc++ testing format is being
removed in favour of the new one. Follow-up commits will clean up the
code that is dead after the removal of this option.
[1]: http://lists.llvm.org/pipermail/libcxx-dev/2020-June/000885.html
The integration between CMake and executor selection in the new format
wasn't very flexible -- only the default executor and SSH executors were
supported.
This patch makes it possible to specify arbitrary executors with the new
format. With the new testing format, a custom executor is just a script
that gets called with a command-line to execute, and some arguments like
--env, --codesign_identity and --execdir. As such, the default executor
is just run.py.
Remote execution with the SSH executor can be achived by specifying
LIBCXX_EXECUTOR="<path-to-ssh.py> --host <host>". Similarly, arbitrary
scripts can be provided.
0e04342ae0 simplified exceptions-related configurations for libc++abi
and libunwind by reusing the logic in libc++. However, it missed the fact
that libc++abi and libunwind were overriding libc++'s handling of exceptions.
This commit removes special handling in libc++abi and libunwind to use
the logic in libc++, which is the right one.
First, libc++abi doesn't need to add the no-exceptions Lit feature itself,
since that is already done in the config.py for libc++, which it reuses.
Specifically, config.enable_exceptions is set based on @LIBCXXABI_ENABLE_EXCEPTIONS@
in libc++abi's lit.cfg.in, and libc++'s config.py handles that correctly.
Secondly, libunwind's LIBUNWIND_ENABLE_EXCEPTIONS is never set (it's
probably a remnant of copy-pasting code between the runtime libraries),
so the library is always built with exceptions disabled (which makes
sense since it implements the runtime support for exceptions).
Conversely, the test suite is always run with exceptions enabled
(not sure why), but that is preserved by the default behavior of
libc++'s config.py.
Instead of having different names for the same Lit feature accross code
bases, use the same name everywhere. This NFC commit is in preparation
for a refactor where all three projects will be using the same Lit
feature detection logic, and hence it won't be convenient to use
different names for the feature.
Differential Revision: https://reviews.llvm.org/D78370
The new format should be equivalent to the old format, and it is now the
default format when running the libc++ and libc++abi tests. This commit
changes the libunwind tests to use the new format by default too. If
unexpected failures are discovered, it should be fine to revert this
commit until they are addressed.
Also note that it is still possible to use the old format by passing
`--param=use_old_format=True` when running Lit for the time being.
Differential Revision: https://reviews.llvm.org/D77733
The LIT substitutions used in libunwind are the same as those from
libc++, and we forgot to update the libunwind tests after the libc++
substitutions started being delimited by braces.
Summary:
This improves unwind performance quite substantially, and follows
a somewhat similar approach used in libgcc_s as described in the
thread here:
https://gcc.gnu.org/ml/gcc/2005-02/msg00625.html
On certain extremely exception heavy internal tests, the time
drops from about 80 minutes to about five minutes.
Subscribers: libcxx-commits
Tags: #libc
Differential Revision: https://reviews.llvm.org/D75954
parseInstructions() doesn't always process the whole set of DWARF
instructions for a frame. It will stop once the target PC is reached, or
if malformed instructions are found. So, for example, if we have an
instruction sequence like this:
```
<start>
...
DW_CFA_remember_state
...
DW_CFA_advance_loc past the location we're unwinding at (pcoffset in parseInstructions() main loop)
...
DW_CFA_restore_state
<end>
```
... the saved state will never be freed, even though the
DW_CFA_remember_state opcode has a matching DW_CFA_restore_state later
in the sequence.
This change adds code to free whatever is left on rememberStack after
parsing the CIE and the FDE instructions.
Differential Revision: https://reviews.llvm.org/D66904
Summary:
Relands https://reviews.llvm.org/D70815.
The original commit set `CMAKE_TRY_COMPILE_TARGET_TYPE` to
`STATIC_LIBRARY` globally in libunwind/CMakeLists.txt, which effectively
disabled the linking step in CMake checks.
This broke some builds (see 938c70b86c).
Here we set CMAKE_TRY_COMPILE_TARGET_TYPE to
STATIC_LIBRARY only when checking for presence of the `-funwind-tables`
flag, and then set it back to the original value so it doesn't affect
other checks.
Reviewers: mstorsjo, jfb
Subscribers: mgorny, christof, libcxx-commits
Tags: #libc
Differential Revision: https://reviews.llvm.org/D71117
This reverts commit b3fdf33ba6.
This change broke building libunwind for Windows/MinGW, and broke
on aspect of the CMake tests in libunwind in general.
After set(CMAKE_TRY_COMPILE_TARGET_TYPE STATIC_LIBRARY), CMake
skips the linking step in tests, but cmake/config-ix.cmake also
does a few checks for functions in libraries (looking for whether
-lc provides fopen and whether -ldl provides dladdr).
As CMake only tests building a static library, these tests
incorrectly succeed and CMake concludes "Looking for fopen in c -
found" and "Looking for dladdr in dl - found", while building
then fails at the end with errors about unable to find -lc and -ldl.
Summary:
Or, rather, don't accidentally forget to pass it.
This is aimed to solve the problem discussed in [this thread](http://lists.llvm.org/pipermail/llvm-dev/2019-November/136890.html), and to fix [a year-old bug](https://bugs.llvm.org/show_bug.cgi?id=38468).
TL;DR: when building libunwind for ARM Linux, we **need** libunwind to be built with the `-funwind-tables` flag, because, well ARM EHABI needs unwind info produced by this flag. Without the flag all the procedures in libunwind are marked `.cantunwind`, which causes all sorts of bad things. From `_Unwind_Backtrace` not working, to C++ exceptions not being caught (which is the aforementioned bug is about).
Previously, this flag was not added because the CMake check `add_compile_flags_if_supported(-funwind-tables)` produced a false negative. Why? With this flag, the compiler generates calls to the `__aeabi_unwind_cpp_pr0` symbol, which is defined in libunwind itself and obviously is not available at configure time, before libunwind is built. This led to failure at link time during the CMake check. We handle this by disabling the linker for CMake checks in linbunwind.
Also, this patch introduces a lit feature `libunwind-arm-ehabi`, which is used to mark the `signal_frame.pass.cpp` test as unsupported (as was advised by @miyuki in D70397).
Reviewers: peter.smith, phosek, EricWF, compnerd, jroelofs, saugustine, miyuki, jfb
Subscribers: mgorny, kristof.beyls, christof, libcxx-commits, miyuki
Tags: #libc
Differential Revision: https://reviews.llvm.org/D70815
Summary:
This patch adjusts the signal_frame.pass.cpp to pass on Arm targets:
* When Arm EHABI is used the unwinder does not use DWARF, hence the
DWARF-specific check unw_is_signal_frame() must be disabled.
* Certain C libraries don't include EH tables, so the unwinder must
not try to step out of main(). The patch moves the test code out of
main() into a separate function to avoid this.
Reviewers: saugustine, ostannard, phosek, jfb, mclow.lists
Reviewed By: saugustine
Subscribers: dexonsmith, aprantl, kristof.beyls, christof, libcxx-commits, pbarrio, labrinea
Tags: #libc
Differential Revision: https://reviews.llvm.org/D70397
A "signal frame" is a function or block of code where execution arrives via a signal or interrupt, rather than via a normal call instruction. In fact, a particular instruction is interrupted by the signal and needs to be restarted. Therefore, when the signal handler is complete, execution needs to return to the interrupted instruction, rather than the instruction immediately following the call instruction, as in a normal call.
Stack unwinders need to know this to correctly unwind signal frames. Dwarf handily provides an "S" in the CIE augmentation string to describe this case, and the libunwind API provides various functions to for unwinders to determine it,.
The llvm libunwind implementation correctly sets it's internal variable "isSignalFrame" when initializing an unwind context. However, upon stepping up the stack, the current implementation correctly reads the augmentation string and sets it in the CIE info (which it then discards), libunwind doesn't update it's internal unwind context data structure.
This change fixes that, and provides compatibility with both the canonical libunwind and the libgcc implementation.
Reviewers: jfb
Subscribers: christof, libcxx-commits
Tags: #libc
Differential Revision: https://reviews.llvm.org/D69677
ARM EHABI unwinding tables only store the start address of each function, so the
last function is assumed to cover the entire address space after it. The test
picks an address on the stack assuming that it's in no function, but because of
the above it's actually resolved to the last function. Fix this by using address
0 instead.
Differential Revision: https://reviews.llvm.org/D68387
llvm-svn: 373628
If unwind info is not available at the current IP, unw_get_proc_info should
return a zero-filled structure rather than the info of the previous IP.
This change also makes unw_get_proc_info return UNW_ENOINFO instead of
UNW_ESUCCESS.
Patch by Amanieu d'Antras!
llvm-svn: 372407
Fix two issues that caused libcxx source path not to be inferred
correctly when not specified explicitly:
1. get_lit_conf() uses default value only if the lit variable is set
to None. Due to the mehod of substituting lit.site.cfg, they were
"" rather than None when unset, effectively causing the default never
to apply. Instead, use 'or' construct to use the default whenever
get_lit_conf() returns a false value.
2. If os.path.join() is given a component starting with '/', it takes
it to be an absolute path and ignores everything preceding it.
Remove the slash to correctly append subdirectory.
With these two fixes, libunwind tests start working on NetBSD buildbot
again.
Differential Revision: https://reviews.llvm.org/D62005
llvm-svn: 361931
This change makes each unwind step inspect the instruction at the
return address and, if needed, read r2 from its saved location and
modify the context appropriately.
The unwind logic is able to handle both ELFv1 and ELFv2 stacks.
Reported by Bug 41050
Patch by Leandro Lupori!
Differential Revision: https://reviews.llvm.org/D59694
llvm-svn: 360861
We're building tests with -nostdlib which means that we need to
explicitly include the builtins library. When using libgcc (default)
we can simply include -lgcc_s on the link line, but when using
compiler-rt builtins we need a complete path to the builtins library.
This path is already available in CMake as <PROJECT>_BUILTINS_LIBRARY,
so we just need to pass that path to lit and if config.compiler_rt is
true, link it to the test.
Prior to this patch, running tests when compiler-rt is being used as
the builtins library was broken as all tests would fail to link, but
with this change running tests when compiler-rt bultins library is
being used should be supported.
Differential Revision: https://reviews.llvm.org/D56701
llvm-svn: 353208
There are several changes:
- Don't stringify Pythonized bools (that's why we're Pythonizing them)
- Support specifying target and sysroot via CMake variables
- Use consistent spelling for --target, --sysroot, --gcc-toolchain
llvm-svn: 353137
CMake has a standard way of setting target triple, sysroot and external
toolchain through CMAKE_<LANG>_COMPILER_TARGET, CMAKE_SYSROOT and
CMAKE_<LANG>_COMPILER_EXTERNAL_TOOLCHAIN. These are turned into
corresponding --target=, --sysroot= and --gcc-toolchain= variables add
included appended to CMAKE_<LANG>_FLAGS.
libunwind, libc++abi, libc++ provides their own mechanism through
<PROJECT>_TARGET_TRIPLE, <PROJECT>_SYSROOT and <PROJECT>_GCC_TOOLCHAIN
variables. These are also passed to lit via lit.site.cfg, and lit config
uses these to set the corresponding compiler flags when building tessts.
This means that there are two different ways of setting target, sysroot
and toolchain, but only one is properly supported in lit. This change
extends CMake build for libunwind, libc++abi and libc++ to also support
the CMake variables in addition to project specific ones in lit.
Differential Revision: https://reviews.llvm.org/D57670
llvm-svn: 353084
to reflect the new license. These used slightly different spellings that
defeated my regular expressions.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351648
Summary:
This is done via new LIBUNWIND_TEST_COMPILER_FLAGS and
LIBUNWIND_TEST_LINKER_FLAGS variables.
Reviewed By: sdardis
Differential Revision: https://reviews.llvm.org/D43585
llvm-svn: 326223
For many targets setting -fno-exceptions will prevent unwinding tables from
being generated for the test programs. As libunwind depends on the tables to
unwind the stack several tests will fail.
This change always adds -funwind-tables so that even when -fno-exceptions
is set unwind tables are generated.
fixes PR33858
Differential Revision: https://reviews.llvm.org/D37484
llvm-svn: 316657
It seems that GCC interprets `__attribute__((__aligned__))` as 8-byte
alignment on ARM, but clang does not. Explicitly specify the
double-word alignment value to ensure that the structure is properly
aligned.
llvm-svn: 311574
Ryan Prichard