This patch adds new PM support for the pass and the pass can be now used
during middle-end transforms. The old pass is remamed to
ScalarizeMaskedMemIntrinLegacyPass.
Reviewed-By: skatkov, aeubanks
Differential Revision: https://reviews.llvm.org/D92743
This is the #1 of 2 changes that make remarks hotness threshold option
available in more tools. The changes also allow the threshold to sync with
hotness threshold from profile summary with special value 'auto'.
This change modifies the interface of lto::setupLLVMOptimizationRemarks() to
accept remarks hotness threshold. Update all the tools that use it with remarks
hotness threshold options:
* lld: '--opt-remarks-hotness-threshold='
* llvm-lto2: '--pass-remarks-hotness-threshold='
* llvm-lto: '--lto-pass-remarks-hotness-threshold='
* gold plugin: '-plugin-opt=opt-remarks-hotness-threshold='
Differential Revision: https://reviews.llvm.org/D85809
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
Summary:
This patch does the following:
1. Make InitTargetOptionsFromCodeGenFlags() accepts Triple as a
parameter, because some options' default value is triple dependant.
2. DataSections is turned on by default on AIX for llc.
3. Test cases change accordingly because of the default behaviour change.
4. Clang Driver passes in -fdata-sections by default on AIX.
Reviewed By: MaskRay, DiggerLin
Differential Revision: https://reviews.llvm.org/D88737
Some targets have different defaults. This patch defers initialization of `TargetOptions` so that a future patch can pass `TargetOptions` to `InitTargetOptionsFromCodeGenFlags`
Reviewed By: jasonliu
Differential Revision: https://reviews.llvm.org/D88748
For IR generated by a compiler, this is really simple: you just take the
datalayout from the beginning of the file, and apply it to all the IR
later in the file. For optimization testcases that don't care about the
datalayout, this is also really simple: we just use the default
datalayout.
The complexity here comes from the fact that some LLVM tools allow
overriding the datalayout: some tools have an explicit flag for this,
some tools will infer a datalayout based on the code generation target.
Supporting this properly required plumbing through a bunch of new
machinery: we want to allow overriding the datalayout after the
datalayout is parsed from the file, but before we use any information
from it. Therefore, IR/bitcode parsing now has a callback to allow tools
to compute the datalayout at the appropriate time.
Not sure if I covered all the LLVM tools that want to use the callback.
(clang? lli? Misc IR manipulation tools like llvm-link?). But this is at
least enough for all the LLVM regression tests, and IR without a
datalayout is not something frontends should generate.
This change had some sort of weird effects for certain CodeGen
regression tests: if the datalayout is overridden with a datalayout with
a different program or stack address space, we now parse IR based on the
overridden datalayout, instead of the one written in the file (or the
default one, if none is specified). This broke a few AVR tests, and one
AMDGPU test.
Outside the CodeGen tests I mentioned, the test changes are all just
fixing CHECK lines and moving around datalayout lines in weird places.
Differential Revision: https://reviews.llvm.org/D78403
Summary:
At the moment, any changes we make to the passes that can be
injected before/after others (e.g. -verify-machineinstrs and
-print-after-all) have to be duplicated in both
TargetPassConfig (for normal execution, -start-before/
-stop-before/etc) and llc (for -run-pass). Unify this pass
injection into addMachinePrePass/addMachinePostPass that both
TargetPassConfig and llc can use.
Reviewers: vsk, aprantl, bogner
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77887
For each natural loop with multiple exit blocks, this pass creates a
new block N such that all exiting blocks now branch to N, and then
control flow is redistributed to all the original exit blocks.
The bulk of the tranformation is a new function introduced in
BasicBlockUtils that an redirect control flow from a set of incoming
blocks to a set of outgoing blocks via a common "hub".
This is a useful workaround for a limitation in the structurizer which
incorrectly orders blocks when processing a nest of loops. This pass
bypasses that issue by ensuring that each natural loop is recognized
as a separate region. Since the structurizer is a region pass, it no
longer sees a nest of loops in a single region, and instead processes
each "level" in the nesting as a separate region.
The AMDGPU backend provides a new option to enable this pass before
the structurizer, which may eventually be enabled by default.
Reviewers: madhur13490, arsenm, nhaehnle
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D75865
The only reason we export symbols from these tools is to support
plugins; if we don't have plugins, exporting symbols just bloats the
executable and makes LTO less effective.
See review of D75879 for the discussion that led to this patch.
Differential Revision: https://reviews.llvm.org/D76527
-fuse-init-array is now the CC1 default but TargetLoweringObjectFileELF::UseInitArray still defaults to false.
The following two unknown OS target triples continue using .ctors/.dtors because InitializeELF is not called.
clang -target i386 -c a.c
clang -target x86_64 -c a.c
This cleanup fixes this as a bonus.
X86SpeculativeLoadHardeningPass::tracePredStateThroughCall can call
MCContext::createTempSymbol before TargetLoweringObjectFileELF::Initialize().
We need to call TargetLoweringObjectFileELF::Initialize() ealier.
test/CodeGen/X86/speculative-load-hardening-indirect.ll
Differential Revision: https://reviews.llvm.org/D71360
MIRParser uses MC and transitively calls MCObjectFileInfo::getObjectFileType().
TargetLoweringObjectFile::Initialize should be called beforehand to
initialize MCObjectFileInfo::Env.
This manifested as a -fsanitize=undefined
test/CodeGen/MIR/X86/instr-symbols-and-mcsymbol-operands.mir failure
when D71360/aa5ee8f244441a8ea103a7e0ed8b6f3e74454516 was committed.
MCTargetOptionsCommandFlags.inc and CommandFlags.inc are headers which contain
cl::opt with static storage.
These headers are meant to be incuded by tools to make it easier to parametrize
codegen/mc.
However, these headers are also included in at least two libraries: lldCommon
and handle-llvm. As a result, when creating DYLIB, clang-cpp holds a reference
to the options, and lldCommon holds another reference. Linking the two in a
single executable, as zig does[0], results in a double registration.
This patch explores an other approach: the .inc files are moved to regular
files, and the registration happens on-demand through static declaration of
options in the constructor of a static object.
[0] https://bugzilla.redhat.com/show_bug.cgi?id=1756977#c5
Differential Revision: https://reviews.llvm.org/D75579
This extends the RemarkStreamer to allow for other emitters (e.g.
frontends, SIL, etc.) to emit remarks through a common interface.
See changes in llvm/docs/Remarks.rst for motivation and design choices.
Differential Revision: https://reviews.llvm.org/D73676
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
The `llc` tool currently defaults to Static relocation model and generates non-relocatable code for 32-bit Power.
This is not desirable on AIX where we always generate Position Independent Code (PIC). This patch makes PIC the default relocation model for AIX.
Reviewers: daltenty, hubert.reinterpretcast, DiggerLin, Xiangling_L, sfertile
Reviewed By: hubert.reinterpretcast
Subscribers: mgorny, wuzish, nemanjai, hiraditya, kbarton, jsji, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72479
A random set of attributes are implemented by llc/opt forcing the
string attributes on the IR functions before processing anything. This
would not happen for MIR functions, which have not yet been created at
this point.
Use a callback in the MIR parser, purely to avoid dealing with the
ugliness that the command line flags are in a .inc file, and would
require allowing access to these flags from multiple places (either
from the MIR parser directly, or a new utility pass to implement these
flags). It would probably be better to cleanup the flag handling into
a separate library.
This is in preparation for treating more command line flags with a
corresponding function attribute in a more uniform way. The fast math
flags in particular have a messy system where the command line flag
sets the behavior from a function attribute if present, and otherwise
the command line flag. This means if any other pass tries to inspect
the function attributes directly, it will be inconsistent with the
intended behavior. This is also inconsistent with the current behavior
of -mcpu and -mattr, which overwrites any pre-existing function
attributes. I would like to move this to consistenly have the command
line flags not overwrite any pre-existing attributes, and to always
ensure the command line flags are consistent with the function
attributes.
Avoids the need to include TargetMachine.h from various places just for
an enum. Various other enums live here, such as the optimization level,
TLS model, etc. Data suggests that this change probably doesn't matter,
but it seems nice to have anyway.
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
Summary:
this allows us to move logic about when it is appropriate set
LLVM_NO_DEAD_STRIP out of each tool and into add_llvm_executable,
which will enable future platform specific handling.
This is a follow on to the reverted D69356
Reviewers: hubert.reinterpretcast, beanz, lhames
Reviewed By: beanz
Subscribers: mgorny, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69638
Summary:
The variable LLVM_NO_DEAD_STRIP is set in LLVM cmake files when building executables that might make use of plugins .The name of the variable does not convey the actual intended usage (i.e. for use with tools that have plugins), just what the eventual effect of setting in on some (i.e. not garbage collecting unused symbols).
This patch renames it to LLVM_SUPPORT_PLUGINS to convey the intended usage, which will allow subsequent patches to add behavior to support that in different ways without confusion about whether it will do on, for example, non-gnu platforms.
Reviewers: hubert.reinterpretcast, stevewan
Reviewed By: stevewan
Subscribers: cfe-commits, mgorny, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D69356
Existing clients are converted to use MachineModuleInfoWrapperPass. The
new interface is for defining a new pass manager API in CodeGen.
Reviewers: fedor.sergeev, philip.pfaffe, chandlerc, arsenm
Reviewed By: arsenm, fedor.sergeev
Differential Revision: https://reviews.llvm.org/D64183
llvm-svn: 373240
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Use -fsave-optimization-record=<format> to specify a different format
than the default, which is YAML.
For now, only YAML is supported.
llvm-svn: 363573
* Add a common function to setup opt-remarks
* Rename common options to the same names
* Add error types to distinguish between file errors and regex errors
llvm-svn: 363415
* Add a common function to setup opt-remarks
* Rename common options to the same names
* Add error types to distinguish between file errors and regex errors
llvm-svn: 363328
Patch which introduces a target-independent framework for generating
hardware loops at the IR level. Most of the code has been taken from
PowerPC CTRLoops and PowerPC has been ported over to use this generic
pass. The target dependent parts have been moved into
TargetTransformInfo, via isHardwareLoopProfitable, with
HardwareLoopInfo introduced to transfer information from the backend.
Three generic intrinsics have been introduced:
- void @llvm.set_loop_iterations
Takes as a single operand, the number of iterations to be executed.
- i1 @llvm.loop_decrement(anyint)
Takes the maximum number of elements processed in an iteration of
the loop body and subtracts this from the total count. Returns
false when the loop should exit.
- anyint @llvm.loop_decrement_reg(anyint, anyint)
Takes the number of elements remaining to be processed as well as
the maximum numbe of elements processed in an iteration of the loop
body. Returns the updated number of elements remaining.
llvm-svn: 362774
Separate the remark serialization to YAML from the LLVM Diagnostics.
This adds a new serialization abstraction: remarks::Serializer. It's
completely independent from lib/IR and it provides an easy way to
replace YAML by providing a new remarks::Serializer.
Differential Revision: https://reviews.llvm.org/D62632
llvm-svn: 362160
Summary:
For the most part this consists of replacing ${LLVM_TARGETS_TO_BUILD} with
some combination of AllTargets* so that they depend on specific components
of a target backend rather than all of it. The overall effect of this is
that, for example, tools like opt no longer falsely depend on the
disassembler, while tools like llvm-ar no longer depend on the code
generator.
There's a couple quirks to point out here:
* AllTargetsCodeGens is a bit more prevalent than expected. Tools like dsymutil
seem to need it which I was surprised by.
* llvm-xray linked to all the backends but doesn't seem to need any of them.
It builds and passes the tests so that seems to be correct.
* I left gold out as it's not built when binutils is not available so I'm
unable to test it
Reviewers: bogner, JDevlieghere
Reviewed By: bogner
Subscribers: mehdi_amini, mgorny, steven_wu, dexonsmith, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62331
llvm-svn: 361567
Currently we have -Rpass for filtering the remarks that are displayed as
diagnostics, but when using -fsave-optimization-record, there is no way
to filter the remarks while generating them.
This adds support for filtering remarks by passes using a regex.
Ex: `clang -fsave-optimization-record -foptimization-record-passes=inline`
will only emit the remarks coming from the pass `inline`.
This adds:
* `-fsave-optimization-record` to the driver
* `-opt-record-passes` to cc1
* `-lto-pass-remarks-filter` to the LTOCodeGenerator
* `--opt-remarks-passes` to lld
* `-pass-remarks-filter` to llc, opt, llvm-lto, llvm-lto2
* `-opt-remarks-passes` to gold-plugin
Differential Revision: https://reviews.llvm.org/D59268
Original llvm-svn: 355964
llvm-svn: 355984
Currently we have -Rpass for filtering the remarks that are displayed as
diagnostics, but when using -fsave-optimization-record, there is no way
to filter the remarks while generating them.
This adds support for filtering remarks by passes using a regex.
Ex: `clang -fsave-optimization-record -foptimization-record-passes=inline`
will only emit the remarks coming from the pass `inline`.
This adds:
* `-fsave-optimization-record` to the driver
* `-opt-record-passes` to cc1
* `-lto-pass-remarks-filter` to the LTOCodeGenerator
* `--opt-remarks-passes` to lld
* `-pass-remarks-filter` to llc, opt, llvm-lto, llvm-lto2
* `-opt-remarks-passes` to gold-plugin
Differential Revision: https://reviews.llvm.org/D59268
llvm-svn: 355964
This allows us to store more info about where we're emitting the remarks
without cluttering LLVMContext. This is needed for future support for
the remark section.
Differential Revision: https://reviews.llvm.org/D58996
Original llvm-svn: 355507
llvm-svn: 355514
This allows us to store more info about where we're emitting the remarks
without cluttering LLVMContext. This is needed for future support for
the remark section.
Differential Revision: https://reviews.llvm.org/D58996
llvm-svn: 355507
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
InitLLVM already calls llvm_shutdown, but llc registers for shutdown
with llvm_shutdown_obj so it gets called twice. It's not hurting anything, but
it's also not useful, so don't do it.
Reviewers: ruiu
Subscribers: aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D46788
llvm-svn: 332174
We have a few functions that virtually all command wants to run on
process startup/shutdown. This patch adds InitLLVM class to do that
all at once, so that we don't need to copy-n-paste boilerplate code
to each llvm command's main() function.
Differential Revision: https://reviews.llvm.org/D45602
llvm-svn: 330046
These aren't the .def style files used in LLVM that require a macro
defined before their inclusion - they're just basic non-modular includes
to stamp out command line flag variables.
llvm-svn: 329840
Sometimes users do not specify data layout in LLVM assembly and let llc set the
data layout by target triple after loading the LLVM assembly.
Currently the parser checks alloca address space no matter whether the LLVM
assembly contains data layout definition, which causes false alarm since the
default data layout does not contain the correct alloca address space.
The parser also calls verifier to check debug info and updating invalid debug
info. Currently there is no way to let the verifier to check debug info only.
If the verifier finds non-debug-info issues the parser will fail.
For llc, the fix is to remove the check of alloca addr space in the parser and
disable updating debug info, and defer the updating of debug info and
verification to be after setting data layout of the IR by target.
For other llvm tools, since they do not override data layout by target but
instead can override data layout by a command line option, an argument for
overriding data layout is added to the parser. In cases where data layout
overriding is necessary for the parser, the data layout can be provided by
command line.
Differential Revision: https://reviews.llvm.org/D41832
llvm-svn: 323826
Anna Thomas