reapply: reimplement the second half of the or/add optimization. We should now
with no changes. Turns out that one missing "Defs = [EFLAGS]" can upset things
a bit.
llvm-svn: 116040
only end up emitting LEA instead of OR. If we aren't able to promote
something into an LEA, we should never be emitting it as an ADD.
Add some testcases that we emit "or" in cases where we used to produce
an "add".
llvm-svn: 116026
having to do a double cast (uint64_t --> double --> float). This is based on the algorithm from compiler_rt's __floatundisf
for X86-64.
llvm-svn: 115634
The x86_mmx type is used for MMX intrinsics, parameters and
return values where these use MMX registers, and is also
supported in load, store, and bitcast.
Only the above operations generate MMX instructions, and optimizations
do not operate on or produce MMX intrinsics.
MMX-sized vectors <2 x i32> etc. are lowered to XMM or split into
smaller pieces. Optimizations may occur on these forms and the
result casted back to x86_mmx, provided the result feeds into a
previous existing x86_mmx operation.
The point of all this is prevent optimizations from introducing
MMX operations, which is unsafe due to the EMMS problem.
llvm-svn: 115243
edited during emission.
If the basic block ends in a switch that gets lowered to a jump table, any
phis at the default edge were getting updated wrong. The jump table data
structure keeps a pointer to the header blocks that wasn't getting updated
after the MBB is split.
This bug was exposed on 32-bit Linux when disabling critical edge splitting in
codegen prepare.
The fix is to uipdate stale MBB pointers whenever a block is split during
emission.
llvm-svn: 115191
This reverts revision 114633. It was breaking llvm-gcc-i386-linux-selfhost.
It seems there is a downstream bug that is exposed by
-cgp-critical-edge-splitting=0. When that bug is fixed, this patch can go back
in.
Note that the changes to tailcallfp2.ll are not reverted. They were good are
required.
llvm-svn: 114859
x86-32: 32-bit calls were named "call" not "calll". 64-bit calls were correctly
named "callq", so this only impacted x86-32.
This fixes rdar://8456370 - llvm-mc rejects 'calll'
This also exposes that mingw/64 is generating a 32-bit call instead of a 64-bit call,
I will file a bugzilla.
llvm-svn: 114534
(sbbl x, x) sets the registers to 0 or ~0. Combined with two's complement arithmetic, we can fold
the intermediate AND and the ADD into a single SUB.
This fixes <rdar://problem/8449754>.
llvm-svn: 114460
CombinerAA cannot assume that different FrameIndex's never alias, but can instead use
MachineFrameInfo to get the actual offsets of these slots and check for actual aliasing.
This fixes CodeGen/X86/2010-02-19-TailCallRetAddrBug.ll and CodeGen/X86/tailcallstack64.ll
when CombinerAA is enabled, modulo a different register allocation sequence.
llvm-svn: 114348
NO path to the destination containing side effects, not that SOME path contains no side effects.
In practice, this only manifests with CombinerAA enabled, because otherwise the chain has little
to no branching, so "any" is effectively equivalent to "all".
llvm-svn: 114268
1) Do forward copy propagation. This makes it easier to estimate the cost of the
instruction being sunk.
2) Break critical edges on demand, including cases where the value is used by
PHI nodes.
Critical edge splitting is not yet enabled by default.
llvm-svn: 114227
walking the asm arguments once and stashing their Values. This is
wrong because the same memory location can be in the list twice, and
if the first one has a sunkaddr substituted, the stashed value for the
second one will be wrong (use-after-free). PR 8154.
llvm-svn: 114104
Since mem2reg isn't run at -O0, we get a ton of reloads from the stack,
for example, before, this code:
int foo(int x, int y, int z) {
return x+y+z;
}
used to compile into:
_foo: ## @foo
subq $12, %rsp
movl %edi, 8(%rsp)
movl %esi, 4(%rsp)
movl %edx, (%rsp)
movl 8(%rsp), %edx
movl 4(%rsp), %esi
addl %edx, %esi
movl (%rsp), %edx
addl %esi, %edx
movl %edx, %eax
addq $12, %rsp
ret
Now we produce:
_foo: ## @foo
subq $12, %rsp
movl %edi, 8(%rsp)
movl %esi, 4(%rsp)
movl %edx, (%rsp)
movl 8(%rsp), %edx
addl 4(%rsp), %edx ## Folded load
addl (%rsp), %edx ## Folded load
movl %edx, %eax
addq $12, %rsp
ret
Fewer instructions and less register use = faster compiles.
llvm-svn: 113102
there are clearly no stores between the load and the store. This fixes
this miscompile reported as PR7833.
This breaks the test/CodeGen/X86/narrow_op-2.ll optimization, which is
safe, but awkward to prove safe. Move it to X86's README.txt.
llvm-svn: 112861
check more strict, breaking some cases not checked in the
testsuite, but also exposes some foldings not done before,
as this example:
movaps (%rdi), %xmm0
movaps (%rax), %xmm1
movaps %xmm0, %xmm2
movss %xmm1, %xmm2
shufps $36, %xmm2, %xmm0
now is generated as:
movaps (%rdi), %xmm0
movaps %xmm0, %xmm1
movlps (%rax), %xmm1
shufps $36, %xmm1, %xmm0
llvm-svn: 112753
1) nuke ConstDataCoalSection, which is dead.
2) revise my previous patch for rdar://8018335,
which was completely wrong. Specifically, it doesn't
make sense to mark __TEXT,__const_coal as PURE_INSTRUCTIONS,
because it is for readonly data. templates (it turns out)
go to const_coal_nt. The real fix for rdar://8018335 was
to give ConstTextCoalSection a section kind of ReadOnly
instead of Text.
llvm-svn: 112496
when the top elements of a vector are undefined. This happens all
the time for X86-64 ABI stuff because only the low 2 elements of
a 4 element vector are defined. For example, on:
_Complex float f32(_Complex float A, _Complex float B) {
return A+B;
}
We used to produce (with SSE2, SSE4.1+ uses insertps):
_f32: ## @f32
movdqa %xmm0, %xmm2
addss %xmm1, %xmm2
pshufd $16, %xmm2, %xmm2
pshufd $1, %xmm1, %xmm1
pshufd $1, %xmm0, %xmm0
addss %xmm1, %xmm0
pshufd $16, %xmm0, %xmm1
movdqa %xmm2, %xmm0
unpcklps %xmm1, %xmm0
ret
We now produce:
_f32: ## @f32
movdqa %xmm0, %xmm2
addss %xmm1, %xmm2
pshufd $1, %xmm1, %xmm1
pshufd $1, %xmm0, %xmm3
addss %xmm1, %xmm3
movaps %xmm2, %xmm0
unpcklps %xmm3, %xmm0
ret
This implements rdar://8368414
llvm-svn: 112378
expanding: e.g. <2 x float> -> <4 x float> instead of -> 2 floats. This
affects two places in the code: handling cross block values and handling
function return and arguments. Since vectors are already widened by
legalizetypes, this gives us much better code and unblocks x86-64 abi
and SPU abi work.
For example, this (which is a silly example of a cross-block value):
define <4 x float> @test2(<4 x float> %A) nounwind {
%B = shufflevector <4 x float> %A, <4 x float> undef, <2 x i32> <i32 0, i32 1>
%C = fadd <2 x float> %B, %B
br label %BB
BB:
%D = fadd <2 x float> %C, %C
%E = shufflevector <2 x float> %D, <2 x float> undef, <4 x i32> <i32 0, i32 1, i32 undef, i32 undef>
ret <4 x float> %E
}
Now compiles into:
_test2: ## @test2
## BB#0:
addps %xmm0, %xmm0
addps %xmm0, %xmm0
ret
previously it compiled into:
_test2: ## @test2
## BB#0:
addps %xmm0, %xmm0
pshufd $1, %xmm0, %xmm1
## kill: XMM0<def> XMM0<kill> XMM0<def>
insertps $0, %xmm0, %xmm0
insertps $16, %xmm1, %xmm0
addps %xmm0, %xmm0
ret
This implements rdar://8230384
llvm-svn: 112101
comparison is in a different basic block from the branch. In such
cases, the comparison's operands may not have initialized virtual
registers available.
llvm-svn: 111709
where the step value is an induction variable from an outer loop, to
avoid trouble trying to re-expand such expressions. This effectively
hides such expressions from indvars and lsr, which prevents them
from getting into trouble.
llvm-svn: 111317
- Make foldMemoryOperandImpl aware of 256-bit zero vectors folding and support the 128-bit counterparts of AVX too.
- Make sure MOV[AU]PS instructions are only selected when SSE1 is enabled, and duplicate the patterns to match AVX.
- Add a testcase for a simple 128-bit zero vector creation.
llvm-svn: 110946
term goal here is to be able to match enough of vector_shuffle and build_vector
so all avx intrinsics which aren't mapped to their own built-ins but to
shufflevector calls can be codegen'd. This is the first (baby) step, support
building zeroed vectors.
llvm-svn: 110897
nice farm in the country where it can play with other tests. And bunnies.
It is not clear what is being tested, and the revision history shows a bunch of
random changes to the expected instruction count. Clearly, we are just fudging
it to pass whenever it fails.
llvm-svn: 110118
away from a computer now.
--- Reverse-merging r109881 into '.':
D test/CodeGen/X86/avx-intrinsics-x86.ll
D test/CodeGen/X86/avx-intrinsics-x86_64.ll
llvm-svn: 109959
void foo() { __builtin_unreachable(); }
It will output the following on Darwin X86:
_func1:
Leh_func_begin0:
pushq %rbp
Ltmp0:
movq %rsp, %rbp
Ltmp1:
Leh_func_end0:
This prolog adds a new Call Frame Information (CFI) row to the FDE with an
address that is not within the address range of the code it describes -- part is
equal to the end of the function -- and therefore results in an invalid EH
frame. If we emit a nop in this situation, then the CFI row is now within the
address range.
llvm-svn: 108568
the function. We'll just turn it into a "trap" instruction instead.
The problem with not handling this is that it might generate a prologue without
the equivalent epilogue to go with it:
$ cat t.ll
define void @foo() {
entry:
unreachable
}
$ llc -o - t.ll -relocation-model=pic -disable-fp-elim -unwind-tables
.section __TEXT,__text,regular,pure_instructions
.globl _foo
.align 4, 0x90
_foo: ## @foo
Leh_func_begin0:
## BB#0: ## %entry
pushq %rbp
Ltmp0:
movq %rsp, %rbp
Ltmp1:
Leh_func_end0:
...
The unwind tables then have bad data in them causing all sorts of problems.
Fixes <rdar://problem/8096481>.
llvm-svn: 108473
-enable-no-nans-fp-math and -enable-no-infs-fp-math. All of the current codegen fp math optimizations only care whether the fp arithmetics arguments and results can never be NaN.
llvm-svn: 108465
to keep "Text" in sync with the "pure instructions" section attribute.
Lack of this attribute was preventing the assembler from emitting
multibyte noops instructions for templates (and inlines, and other
coalesced stuff) and was causing the assembler to mismatch .o files.
This fixes rdar://8018335
llvm-svn: 108461
address cannot be allocated a register is in 32-bit mode where the first
three arguments are marked inreg. In that case EAX, EDX, and ECX will be
used for argument passing.
This fixes PR7610.
llvm-svn: 108327
- Check getBytesToPopOnReturn().
- Eschew ST0 and ST1 for return values.
- Fix the PIC base register initialization so that it doesn't ever
fail to end up the top of the entry block.
llvm-svn: 108039
U utils/TableGen/FastISelEmitter.cpp
--- Reverse-merging r107943 into '.':
U test/CodeGen/X86/fast-isel.ll
U test/CodeGen/X86/fast-isel-loads.ll
U include/llvm/Target/TargetLowering.h
U include/llvm/Support/PassNameParser.h
U include/llvm/CodeGen/FunctionLoweringInfo.h
U include/llvm/CodeGen/CallingConvLower.h
U include/llvm/CodeGen/FastISel.h
U include/llvm/CodeGen/SelectionDAGISel.h
U lib/CodeGen/LLVMTargetMachine.cpp
U lib/CodeGen/CallingConvLower.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
U lib/CodeGen/SelectionDAG/FunctionLoweringInfo.cpp
U lib/CodeGen/SelectionDAG/FastISel.cpp
U lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp
U lib/CodeGen/SelectionDAG/ScheduleDAGSDNodes.cpp
U lib/CodeGen/SelectionDAG/InstrEmitter.cpp
U lib/CodeGen/SelectionDAG/TargetLowering.cpp
U lib/Target/XCore/XCoreISelLowering.cpp
U lib/Target/XCore/XCoreISelLowering.h
U lib/Target/X86/X86ISelLowering.cpp
U lib/Target/X86/X86FastISel.cpp
U lib/Target/X86/X86ISelLowering.h
llvm-svn: 107987
It is OK for an alias live range to overlap if there is a copy to or from the
physical register. CoalescerPair can work out if the copy is coalescable
independently of the alias.
This means that we can join with the actual destination interval instead of
using the getOrigDstReg() hack. It is no longer necessary to merge clobber
ranges into subregisters.
llvm-svn: 107695
the example in the testcase, we now generate:
_test1: ## @test1
movss 4(%esp), %xmm0
addss 8(%esp), %xmm0
movl 12(%esp), %eax
movss %xmm0, (%eax)
ret
instead of:
_test1: ## @test1
subl $20, %esp
movl 24(%esp), %eax
movq %mm0, (%esp)
movq %mm0, 8(%esp)
movss (%esp), %xmm0
addss 12(%esp), %xmm0
movss %xmm0, (%eax)
addl $20, %esp
ret
v2f32 support did not work reliably because most of the X86
backend didn't know it was legal. It was apparently only added
to support returning source-level v2f32 values in MMX registers
in x86-32 mode. If ABI compatibility is important on this
GCC-extended-vector type for some reason, then the frontend
should generate IR that returns v2i32 instead of v2f32. However,
we generally don't try very hard to be abi compatible on gcc
extended vectors.
llvm-svn: 107601
v2f32 as legal in 32-bit mode. It is just as terrible there,
but I just care about x86-64 and noone claims it is valuable
in 64-bit mode.
llvm-svn: 107600
- X86 unfolding should check if the instructions being unfolded has memoperands.
If there is no memoperands, then it must assume conservative alignment. If this
would introduce an expensive sse unaligned load / store, then unfoldMemoryOperand
etc. should not unfold the instruction.
llvm-svn: 107509
PrologEpilog code, and use it to determine whether
the asm forces stack alignment or not. gcc consistently
does not do this for GCC-style asms; Apple gcc inconsistently
sometimes does it for asm blocks. There is no
convenient place to put a bit in either the SDNode or
the MachineInstr form, so I've added an extra operand
to each; unlovely, but it does allow for expansion for
more bits, should we need it. PR 5125. Some
existing testcases are affected.
The operand lists of the SDNode and MachineInstr forms
are indexed with awesome mnemonics, like "2"; I may
fix this someday, but not now. I'm not making it any
worse. If anyone is inspired I think you can find all
the right places from this patch.
llvm-svn: 107506
Objective-C metadata types which should be marked as "weak", but which the
linker will remove upon final linkage. However, this linkage isn't specific to
Objective-C.
For example, the "objc_msgSend_fixup_alloc" symbol is defined like this:
.globl l_objc_msgSend_fixup_alloc
.weak_definition l_objc_msgSend_fixup_alloc
.section __DATA, __objc_msgrefs, coalesced
.align 3
l_objc_msgSend_fixup_alloc:
.quad _objc_msgSend_fixup
.quad L_OBJC_METH_VAR_NAME_1
This is different from the "linker_private" linkage type, because it can't have
the metadata defined with ".weak_definition".
Currently only supported on Darwin platforms.
llvm-svn: 107433
have to be registers, per gcc documentation. This affects
the logic for determining what "g" should lower to. PR 7393.
A couple of existing testcases are affected.
llvm-svn: 107079
When an instruction has tied operands and physreg defines, we must take extra
care that the tied operands conflict with neither physreg defs nor uses.
The special treatment is given to inline asm and instructions with tied operands
/ early clobbers and physreg defines.
This fixes PR7509.
llvm-svn: 107043
CopyFromReg nodes for aliasing registers (AX and AL). This confuses the fast
register allocator.
Instead of CopyFromReg(AL), use ExtractSubReg(CopyFromReg(AX), sub_8bit).
This fixes PR7312.
llvm-svn: 106934
for an "i" constraint should get lowered; PR 6309. While
this argument was passed around a lot, this is the only
place it was used, so it goes away from a lot of other
places.
llvm-svn: 106893
address requires a register or secondary load to compute
(most PIC modes). This improves "g" constraint handling. 8015842.
The test from 2007 is attempting to test the fix for PR1761,
but since -relocation-model=static doesn't work on Darwin
x86-64, it was not testing what it was supposed to be testing
and was passing erroneously. Fixed to use Linux x86-64.
llvm-svn: 106779
when the condition is constant. This optimization shouldn't be
necessary, because codegen shouldn't be able to find dead control
paths that the IR-level optimizer can't find. And it's undesirable,
because it encourages bugpoint to leave "br i1 false" branches
in its output. And it wasn't updating the CFG.
I updated all the tests I could, but some tests are too reduced
and I wasn't able to meaningfully preserve them.
llvm-svn: 106748
Chris Lattner