adding support into lldb_private::Process:
virtual uint32_t
lldb_private::Process::LoadImage (const FileSpec &image_spec,
Error &error);
virtual Error
lldb_private::Process::UnloadImage (uint32_t image_token);
There is a default implementation that should work for both linux and MacOSX.
This ability has also been exported through the SBProcess API:
uint32_t
lldb::SBProcess::LoadImage (lldb::SBFileSpec &image_spec,
lldb::SBError &error);
lldb::SBError
lldb::SBProcess::UnloadImage (uint32_t image_token);
Modified the DynamicLoader plug-in interface to require it to be able to
tell us if it is currently possible to load/unload a shared library:
virtual lldb_private::Error
DynamicLoader::CanLoadImage () = 0;
This way the dynamic loader plug-ins are allows to veto whether we can
currently load a shared library since the dynamic loader might know if it is
currenlty loading/unloading shared libraries. It might also know about the
current host system and know where to check to make sure runtime or malloc
locks are currently being held.
Modified the expression parser to have ClangUserExpression::Evaluate() be
the one that causes the dynamic checkers to be loaded instead of other code
that shouldn't have to worry about it.
llvm-svn: 118227
ptrace thread update that was replying to the SIGSTOP was also causing the
process to not really be sigstop'd any more so then the call to ptrace
detach was failing, and when debugserver exited the attached process
was being killed. Now the ptrace thread update does not disturb the sigstop
state of the thread, so the detach works properly.
llvm-svn: 118018
than just the entire log channel.
Add checks, where appropriate, to make sure a log channel/category has
not been disabled before attempting to write to it.
llvm-svn: 117715
1. FoundationDisassembleTestCase.test_simple_disasm_with_dsym; and
2. FoundationDisassembleTestCase.test_simple_disasm_with_dwarf
the reason being the test was issuing 'disassemble' command to disassemble the current
frame function when stopped. The 'disassemble' command worked previously but it was a
result of bad option specification.
Fix the disassemble command so that it will require 'disassemble -f' for disassembly of
the current frame function.
llvm-svn: 117688
which holds the name of a file whose contents are
prefixed to each expression. For example, if the file
~/lldb.prefix.header contains:
typedef unsigned short my_type;
then you can do this:
(lldb) settings set target.expr-prefix '~/lldb.prefix.header'
(lldb) expr sizeof(my_type)
(unsigned long) $0 = 2
When the variable is changed, the corresponding file
is loaded and its contents are fetched into a string
that is stored along with the target. This string
is then passed to each expression and inserted into
it during parsing, like this:
typedef unsigned short my_type;
void
$__lldb_expr(void *$__lldb_arg)
{
sizeof(my_type);
}
llvm-svn: 117627
the breakpoint associated with the (filename, line_number) combo when an arrow is pointing to
a source position using Emacs Grand Unified Debugger library to interact with lldb.
The current implmentation is insufficient in that it only asks the breakpoint whether it is
associated with a breakpoint resolver with FileLine type and whether it matches the (filename, line_number)
combo. There are other breakpoint resolver types whose breakpoint locations can potentially
match the (filename, line_number) combo.
The BreakpointResolver, BreakpointResolverName, BreakpointResolverAddress, and BreakpointResolverFileLine
classes have extra static classof methods to support LLVM style type inquiry through isa, cast, and dyn_cast.
The Breakpoint class has an API method bool GetMatchingFileLine(...) which is invoked from CommandObjectBreak.cpp
to implement the "breakpoint clear" command.
llvm-svn: 117562
it logs the function calls, their arguments and the return values. This is not
complete or polished, but I am committing it now, at the request of someone who
really wants to use it, even though it's not really done. It currently does not
attempt to log all the functions, just the most important ones. I will be
making further adjustments to the API logging code over the next few days/weeks.
(Suggestions for improvements are welcome).
Update the Python build scripts to re-build the swig C++ file whenever
the python-extensions.swig file is modified.
Correct the help for 'log enable' command (give it the correct number & type of
arguments).
llvm-svn: 117349
So the issue here was that we have lldb_private::FileSpec that by default was
always resolving a path when using the:
FileSpec::FileSpec (const char *path);
and in the:
void FileSpec::SetFile(const char *pathname, bool resolve = true);
This isn't what we want in many many cases. One example is you have "/tmp" on
your file system which is really "/private/tmp". You compile code in that
directory and end up with debug info that mentions "/tmp/file.c". Then you
type:
(lldb) breakpoint set --file file.c --line 5
If your current working directory is "/tmp", then "file.c" would be turned
into "/private/tmp/file.c" which won't match anything in the debug info.
Also, it should have been just a FileSpec with no directory and a filename
of "file.c" which could (and should) potentially match any instances of "file.c"
in the debug info.
So I removed the constructor that just takes a path:
FileSpec::FileSpec (const char *path); // REMOVED
You must now use the other constructor that has a "bool resolve" parameter that you must always supply:
FileSpec::FileSpec (const char *path, bool resolve);
I also removed the default parameter to SetFile():
void FileSpec::SetFile(const char *pathname, bool resolve);
And fixed all of the code to use the right settings.
llvm-svn: 116944
optionally specify the tty you want to use if you want to use an existing
terminal window by giving a partial or full path name:
(lldb) process launch --tty=ttys002
This would find the terminal window (or tab on MacOSX) that has ttys002 in its
tty path and use it. If it isn't found, it will use a new terminal window.
llvm-svn: 116878
sockets so the driver doesn't just crash.
Added support for connecting to named sockets (unix IPC sockets) in
ConnectionFileDescriptor.
Modified the Host::LaunchInNewTerminal() for MacOSX to return the process
ID of the inferior process instead of the process ID of the Terminal.app. This
was done by modifying the "darwin-debug" executable to connect to lldb through
a named unix socket which is passed down as an argument. This allows a quick
handshake between "lldb" and "darwin-debug" so we can get the process ID
of the inferior and then attach by process ID and avoid attaching to the
inferior by process name since there could be more than one process with
that name. This still has possible race conditions, those will be fixed
in the near future. This fixes the SIGPIPE issues that were sometimes being
seen when task_for_pid was failing.
llvm-svn: 116792
"vAttachName;<PROCNAME>" packet, and wait for a new process by name to launch
with the "vAttachWait;<PROCNAME>".
Fixed a few issues with attaching where if DoAttach() returned no error, yet
there was no valid process ID, we would deadlock waiting for an event that
would never happen.
Added a new "process launch" option "--tty" that will launch the process
in a new terminal if the Host layer supports the "Host::LaunchInNewTerminal(...)"
function. This currently works on MacOSX and will allow the debugging of
terminal applications that do complex operations with the terminal.
Cleaned up the output when the process resumes, stops and halts to be
consistent with the output format.
llvm-svn: 116693
debug information and you evaluated an expression, a crash would occur as a
result of an unchecked pointer.
Added the ability to get the expression path for a ValueObject. For a rectangle
point child "x" the expression path would be something like: "rect.top_left.x".
This will allow GUI and command lines to get ahold of the expression path for
a value object without having to explicitly know about the hierarchy. This
means the ValueObject base class now has a "ValueObject *m_parent;" member.
All ValueObject subclasses now correctly track their lineage and are able
to provide value expression paths as well.
Added a new "--flat" option to the "frame variable" to allow for flat variable
output. An example of the current and new outputs:
(lldb) frame variable
argc = 1
argv = 0x00007fff5fbffe80
pt = {
x = 2
y = 3
}
rect = {
bottom_left = {
x = 1
y = 2
}
top_right = {
x = 3
y = 4
}
}
(lldb) frame variable --flat
argc = 1
argv = 0x00007fff5fbffe80
pt.x = 2
pt.y = 3
rect.bottom_left.x = 1
rect.bottom_left.y = 2
rect.top_right.x = 3
rect.top_right.y = 4
As you can see when there is a lot of hierarchy it can help flatten things out.
Also if you want to use a member in an expression, you can copy the text from
the "--flat" output and not have to piece it together manually. This can help
when you want to use parts of the STL in expressions:
(lldb) frame variable --flat
argc = 1
argv = 0x00007fff5fbffea8
hello_world._M_dataplus._M_p = 0x0000000000000000
(lldb) expr hello_world._M_dataplus._M_p[0] == '\0'
llvm-svn: 116532
if no update commands are specified it just lists the current values, and show that
it always shows the new values for a signal after it has been updated. Also updated
the help text to match the new functionality.
llvm-svn: 116520
Add missing break statment to case statement in Process::ShouldBroadcastEvent.
Add new command, "process handle" to allow users to control process behavior on
the receipt of various Unix signals (whether the process should stop; whether the
process should be passed the signal; whether the debugger user should be notified
that the signal came in).
llvm-svn: 116430
function. It will inspect NAME and do the following:
- if the name contains '(' or starts with "-[" or "+[" then a full name search
will happen to match full function names with args (C++ demangled names) or
full objective C method prototypes.
- if the name contains "::" and no '(', then it is assumed to be a qualified
function name that is in a namespace or class. For "foo::bar::baz" we will
search for any functions with the basename or method name of "baz", then
filter the results to only those that contain "foo::bar::baz". This allows
setting breakpoint on C++ functions and methods without having to fully
qualify all of the types that would appear in C++ mangled names.
- if the name contains ":" (not "::"), then NAME is assumed to be an ObjC
selector.
_ otherwise, we assume just a plain function basename.
Now that "--name" is our "auto" mode, I introduced the new "--basename" option
("breakpoint set --basename NAME") to allow for function names that aren't
methods or selectors, just basenames. This can also be used to ignore C++
namespaces and class hierarchies for class methods.
Fixed clang enumeration promotion types to be correct.
llvm-svn: 116293
lldb_private::RegularExpression compiles and matches with:
size_t
RegularExpression::GetErrorAsCString (char *err_str,
size_t err_str_max_len) const;
Added the ability to search a variable list for variables whose names match
a regular expression:
size_t
VariableList::AppendVariablesIfUnique (const RegularExpression& regex,
VariableList &var_list,
size_t& total_matches);
Also added the ability to append a variable to a VariableList only if it is
not already in the list:
bool
VariableList::AddVariableIfUnique (const lldb::VariableSP &var_sp);
Cleaned up the "frame variable" command:
- Removed the "-n NAME" option as this is the default way for the command to
work.
- Enable uniqued regex searches on variable names by fixing the "--regex RE"
command to work correctly. It will match all variables that match any
regular expressions and only print each variable the first time it matches.
- Fixed the option type for the "--regex" command to by eArgTypeRegularExpression
instead of eArgTypeCount
llvm-svn: 116178
Added frame relative frame selection to "frame select". You can now select
frames relative to the current frame (which defaults to zero if the current
frame hasn't yet been set for a thread):
The gdb "up" command can be done as:
(lldb) frame select -r 1
The gdb "down" command can be done as:
(lldb) frame select -r -1
Place the following in your ~/.lldbinit file for "up" and "down":
command alias up frame select -r 1
command alias down frame select -r -1
llvm-svn: 116176
as binary bytes or as an ASCII text dump.
- The output file is specified with the "--outfile FILE" option.
- The memory can be appended to an existing file using the "--append" option.
- The memory will be written as an ASCII text dump by default, or as
binary with the "--binary" option.
Added new options to memory write to allow writing all or part of
a file on disk to target memory:
- The input file is specified using the "--infile FILE" option
- The offset at which to start in the file defaults to zero, but
can be overridden using the "--offset OFFSET" option. If the
size is not specified, the remaining number of bytes in the file
will be used as the default byte size.
- The number of bytes to write defaults to the entire file byte
size, but can be changed with the "--size COUNT" option.
llvm-svn: 116172
Update the expected match string.
o lldbtest.py:
Indicate when a command fails, even if there is nothing in the error stream.
o TestHelp.py:
Add a regression test case for 'help image dump symtab'.
o CommandObjectHelp.cpp:
Some of the logic branches with successful help command results were not tagged
with a Success Status. They are fixed now. This is important for Python
interaction.
llvm-svn: 116062
Added a new SortOrder enumeration and hooked it up to the "image dump symtab"
command so we can dump symbol tables in the original order, sorted by address,
or sorted by name.
llvm-svn: 116049
if the address comes from a data section.
Fixed an issue that could occur when looking up a symbol that has a zero
byte size where no match would be returned even if there was an exact symbol
match.
Cleaned up the section dump output and added the section type into the output.
llvm-svn: 116017
tricks to get types to resolve. I did this by correctly including the correct
files: stdint.h and all lldb-*.h files first before including the API files.
This allowed me to remove all of the hacks that were in the lldb.swig file
and it also allows all of the #defines in lldb-defines.h and enumerations
in lldb-enumerations.h to appear in the lldb.py module. This will make the
python script code a lot more readable.
Cleaned up the "process launch" command to not execute a "process continue"
command, it now just does what it should have with the internal API calls
instead of executing another command line command.
Made the lldb_private::Process set the state to launching and attaching if
WillLaunch/WillAttach return no error respectively.
llvm-svn: 115902
bool ValueObject::GetIsConstant() const;
void ValueObject::SetIsConstant();
This will stop anything from being re-evaluated within the value object so
that constant result value objects can maintain their frozen values without
anything being updated or changed within the value object.
Made it so the ValueObjectConstResult can be constructed with an
lldb_private::Error object to allow for expression results to have errors.
Since ValueObject objects contain error objects, I changed the expression
evaluation in ClangUserExpression from
static Error
ClangUserExpression::Evaluate (ExecutionContext &exe_ctx,
const char *expr_cstr,
lldb::ValueObjectSP &result_valobj_sp);
to:
static lldb::ValueObjectSP
Evaluate (ExecutionContext &exe_ctx, const char *expr_cstr);
Even though expression parsing is borked right now (pending fixes coming from
Sean Callanan), I filled in the implementation for:
SBValue SBFrame::EvaluateExpression (const char *expr);
Modified all expression code to deal with the above changes.
llvm-svn: 115589
results. The clang opaque type for the expression result will be added to the
Target's ASTContext, and the bytes will be stored in a DataBuffer inside
the new object. The class is named: ValueObjectConstResult
Now after an expression is evaluated, we can get a ValueObjectSP back that
contains a ValueObjectConstResult object.
Relocated the value object dumping code into a static function within
the ValueObject class instead of being in the CommandObjectFrame.cpp file
which is what contained the code to dump variables ("frame variables").
llvm-svn: 115578
instance:
settings set frame-format <string>
settings set thread-format <string>
This allows users to control the information that is seen when dumping
threads and frames. The default values are set such that they do what they
used to do prior to changing over the the user defined formats.
This allows users with terminals that can display color to make different
items different colors using the escape control codes. A few alias examples
that will colorize your thread and frame prompts are:
settings set frame-format 'frame #${frame.index}: \033[0;33m${frame.pc}\033[0m{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{ \033[0;35mat \033[1;35m${line.file.basename}:${line.number}}\033[0m\n'
settings set thread-format 'thread #${thread.index}: \033[1;33mtid\033[0;33m = ${thread.id}\033[0m{, \033[0;33m${frame.pc}\033[0m}{ \033[1;4;36m${module.file.basename}\033[0;36m ${function.name}{${function.pc-offset}}\033[0m}{, \033[1;35mstop reason\033[0;35m = ${thread.stop-reason}\033[0m}{, \033[1;36mname = \033[0;36m${thread.name}\033[0m}{, \033[1;32mqueue = \033[0;32m${thread.queue}}\033[0m\n'
A quick web search for "colorize terminal output" should allow you to see what
you can do to make your output look like you want it.
The "settings set" commands above can of course be added to your ~/.lldbinit
file for permanent use.
Changed the pure virtual
void ExecutionContextScope::Calculate (ExecutionContext&);
To:
void ExecutionContextScope::CalculateExecutionContext (ExecutionContext&);
I did this because this is a class that anything in the execution context
heirarchy inherits from and "target->Calculate (exe_ctx)" didn't always tell
you what it was really trying to do unless you look at the parameter.
llvm-svn: 115485
arguments are specified in a standardized way, will have a standardized name, and
have functioning help.
The next step is to start writing useful help for all the argument types.
llvm-svn: 115335
command options; makes it easier to ensure that the same type of
argument will have the same name everywhere, hooks up help for command
arguments, so that users can ask for help when they are confused about
what an argument should be; puts in the beginnings of the ability to
do tab-completion for certain types of arguments, allows automatic
syntax help generation for commands with arguments, and adds command
arguments into command options help correctly.
Currently only the breakpoint-id and breakpoint-id-range arguments, in
the breakpoint commands, have been hooked up to use the new mechanism.
The next steps will be to fix the command options arguments to use
this mechanism, and to fix the rest of the regular command arguments
to use this mechanism. Most of the help text is currently missing or
dummy text; this will need to be filled in, and the existing argument
help text will need to be cleaned up a bit (it was thrown in quickly,
mostly for testing purposes).
Help command now works for all argument types, although the help may not
be very helpful yet.
Those commands that take "raw" command strings now indicate it in their
help text.
llvm-svn: 115318
crossing major breakpoint boundaries (must be within a single breakpoint if specifying locations).
Add .* as a means of specifying all the breakpoint locations under a major breakpoint, e.g. "3.*"
means "all the breakpoint locations of breakpoint 3".
Fix error message to make more sense, if user attempts to specify a breakpoint command when there
isn't a target yet.
llvm-svn: 115077
adding methods to C++ and objective C classes. In order to make methods, we
need the function prototype which means we need the arguments. Parsing these
could cause a circular reference that caused an assertion.
Added a new typedef for the clang opaque types which are just void pointers:
lldb::clang_type_t. This appears in lldb-types.h.
This was fixed by enabling struct, union, class, and enum types to only get
a forward declaration when we make the clang opaque qual type for these
types. When they need to actually be resolved, lldb_private::Type will call
a new function in the SymbolFile protocol to resolve a clang type when it is
not fully defined (clang::TagDecl::getDefinition() returns NULL). This allows
us to be a lot more lazy when parsing clang types and keeps down the amount
of data that gets parsed into the ASTContext for each module.
Getting the clang type from a "lldb_private::Type" object now takes a boolean
that indicates if a forward declaration is ok:
clang_type_t lldb_private::Type::GetClangType (bool forward_decl_is_ok);
So function prototypes that define parameters that are "const T&" can now just
parse the forward declaration for type 'T' and we avoid circular references in
the type system.
llvm-svn: 115012
Change default 'set' behavior so that all instance settings for the specified variable will be
updated, unless the "-n" ("--no_override") command options is specified.
llvm-svn: 114808
Fix minor bug in 'commands alias'; alias commands can now handle command options
and arguments in the same alias. Also fixes problem that disallowed "process launch --" as
an alias.
Fix typo in comment in Python script interpreter.
llvm-svn: 114499
the parent of Process settings; add 'default-arch' as a
class-wide setting for Target. Replace lldb::GetDefaultArchitecture
with Target::GetDefaultArchitecture & Target::SetDefaultArchitecture.
Add 'use-external-editor' as user setting to Debugger class & update
code appropriately.
Add Error parameter to methods that get user settings, for easier
reporting of bad requests.
Fix various other minor related bugs.
Fix test cases to work with new changes.
llvm-svn: 114352
- All single character options will now be printed together
- Changed all options that contains underscores to contain '-' instead
- Made the help come out a little flatter by showing the long and short
option on the same line.
- Modified the short character for "--ignore-count" options to "-i"
llvm-svn: 114265
accessed by the objects that own the settings. The previous approach wasn't
very usable and made for a lot of unnecessary code just to access variables
that were already owned by the objects.
While I fixed those things, I saw that CommandObject objects should really
have a reference to their command interpreter so they can access the terminal
with if they want to output usaage. Fixed up all CommandObjects to take
an interpreter and cleaned up the API to not need the interpreter to be
passed in.
Fixed the disassemble command to output the usage if no options are passed
down and arguments are passed (all disassebmle variants take options, there
are no "args only").
llvm-svn: 114252
or a settings prefix, and it will list information about the subset of settings
you requested. Also added tab-completion (now that it takes an optional argument).
llvm-svn: 113952
Added a "bool show_fullpaths" to many more objects that were
previously always dumping full paths.
Fixed a few places where the DWARF was not indexed when we
we needed it to be when making queries. Also fixed an issue
where the DWARF in .o files wasn't searching all .o files
for the types.
Fixed an issue with the output from "image lookup --type <TYPENAME>"
where the name and byte size might not be resolved and might not
display. We now call the accessors so we end up seeing all of the
type info.
llvm-svn: 113951
to return the correct result.
Fixed "bool Variable::IsInScope (StackFrame *frame)" to return the correct
result when there are no location lists.
Modified the "frame variable" command such that:
- if no arguments are given (dump all frame variables), then we only show
variables that are currently in scope
- if some arguments are given, we show an error if the variable is out of
scope
llvm-svn: 113830
debug map showed that the location lists in the .o files needed some
refactoring in order to work. The case that was failing was where a function
that was in the "__TEXT.__textcoal_nt" in the .o file, and in the
"__TEXT.__text" section in the main executable. This made symbol lookup fail
due to the way we were finding a real address in the debug map which was
by finding the section that the function was in in the .o file and trying to
find this in the main executable. Now the section list supports finding a
linked address in a section or any child sections. After fixing this, we ran
into issue that were due to DWARF and how it represents locations lists.
DWARF makes a list of address ranges and expressions that go along with those
address ranges. The location addresses are expressed in terms of a compile
unit address + offset. This works fine as long as nothing moves around. When
stuff moves around and offsets change between the remapped compile unit base
address and the new function address, then we can run into trouble. To deal
with this, we now store supply a location list slide amount to any location
list expressions that will allow us to make the location list addresses into
zero based offsets from the object that owns the location list (always a
function in our case).
With these fixes we can now re-link random address ranges inside the debugger
for use with our DWARF + debug map, incremental linking, and more.
Another issue that arose when doing the DWARF in the .o files was that GCC
4.2 emits a ".debug_aranges" that only mentions functions that are externally
visible. This makes .debug_aranges useless to us and we now generate a real
address range lookup table in the DWARF parser at the same time as we index
the name tables (that are needed because .debug_pubnames is just as useless).
llvm-gcc doesn't generate a .debug_aranges section, though this could be
fixed, we aren't going to rely upon it.
Renamed a bunch of "UINT_MAX" to "UINT32_MAX".
llvm-svn: 113829
was used to set the selected thread if none was selected. Use a more robust
API to accomplish the task.
Also fixed an error found, while investigating, in CommandObjectThreadSelect::
Execute() where the return status was not properly set if successful.
As a result, both the stl step-in test cases with expectedFailure decorators now
passed.
llvm-svn: 113825
- If you put a semicolon at the end of an expression,
this no longer causes the expression parser to
error out. This was a two-part fix: first,
ClangExpressionDeclMap::Materialize now handles
an empty struct (such as when there is no return
value); second, ASTResultSynthesizer walks backward
from the end of the ASTs until it reaches something
that's not a NullStmt.
- ClangExpressionVariable now properly byte-swaps when
printing itself.
- ClangUtilityFunction now cleans up after itself when
it's done compiling itself.
- Utility functions can now use external functions just
like user expressions.
- If you end your expression with a statement that does
not return a value, the expression now runs correctly
anyway.
Also, added the beginnings of an Objective-C object
validator function, which is neither installed nor used
as yet.
llvm-svn: 113789
no elements so that they at least have 1 element.
Added the ability to show the declaration location of variables to the
"frame variables" with the "--show-declaration" option ("-c" for short).
Changed the "frame variables" command over to use the value object code
so that we use the same code path as the public API does when accessing and
displaying variable values.
llvm-svn: 113733
They will now be represented as:
eSymbolTypeFunction: eSymbolTypeCode with IsDebug() == true
eSymbolTypeGlobal: eSymbolTypeData with IsDebug() == true and IsExternal() == true
eSymbolTypeStatic: eSymbolTypeData with IsDebug() == true and IsExternal() == false
This simplifies the logic when dealing with symbols and allows for symbols
to be coalesced into a single symbol most of the time.
Enabled the minimal symbol table for mach-o again after working out all the
kinks. We now get nice concise symbol tables and debugging with DWARF in the
.o files with a debug map in the binary works well again. There were issues
where the SymbolFileDWARFDebugMap symbol file parser was using symbol IDs and
symbol indexes interchangeably. Now that all those issues are resolved
debugging is working nicely.
llvm-svn: 113678
to specify a one-liner (either scripting or lldb command) inline.
Refactored CommandObjectBreakpointCommandAdd::Execute() a little bit and added
some comments.
Sn now, we use:
breakpoint command add -p 1 -o "conditional_break.stop_if_called_from_a()"
to specify a Python one-liner as the callback for breakpoint #1.
llvm-svn: 113672
SBValue to access it. For now this is just the result of ObjC NSPrintForDebugger,
but could be extended. Also store the results of the ObjC Object Printer in a
Stream, not a ConstString.
llvm-svn: 113660
pointed out by Jim Ingham. The convenient one-liner specification should only
apply when there is only one breakpoint id being specified for the time being.
llvm-svn: 113609
command for a breakpoint, for example:
(lldb) breakpoint command add -p 1 "conditional_break.stop_if_called_from_a()"
The ScriptInterpreter interface has an extra method:
/// Set a one-liner as the callback for the breakpoint command.
virtual void
SetBreakpointCommandCallback (CommandInterpreter &interpreter,
BreakpointOptions *bp_options,
const char *oneliner);
to accomplish the above.
Also added a test case to demonstrate lldb's use of breakpoint callback command
to stop at function c() only when its immediate caller is function a(). The
following session shows the user entering the following commands:
1) command source .lldb (set up executable, breakpoint, and breakpoint command)
2) run (the callback mechanism will skip two breakpoints where c()'s immeidate caller is not a())
3) bt (to see that indeed c()'s immediate caller is a())
4) c (to continue and finish the program)
test/conditional_break $ ../../build/Debug/lldb
(lldb) command source .lldb
Executing commands in '.lldb'.
(lldb) file a.out
Current executable set to 'a.out' (x86_64).
(lldb) breakpoint set -n c
Breakpoint created: 1: name = 'c', locations = 1
(lldb) script import sys, os
(lldb) script sys.path.append(os.path.join(os.getcwd(), os.pardir))
(lldb) script import conditional_break
(lldb) breakpoint command add -p 1 "conditional_break.stop_if_called_from_a()"
(lldb) run
run
Launching '/Volumes/data/lldb/svn/trunk/test/conditional_break/a.out' (x86_64)
(lldb) Checking call frames...
Stack trace for thread id=0x2e03 name=None queue=com.apple.main-thread:
frame #0: a.out`c at main.c:39
frame #1: a.out`b at main.c:34
frame #2: a.out`a at main.c:25
frame #3: a.out`main at main.c:44
frame #4: a.out`start
c called from b
Continuing...
Checking call frames...
Stack trace for thread id=0x2e03 name=None queue=com.apple.main-thread:
frame #0: a.out`c at main.c:39
frame #1: a.out`b at main.c:34
frame #2: a.out`main at main.c:47
frame #3: a.out`start
c called from b
Continuing...
Checking call frames...
Stack trace for thread id=0x2e03 name=None queue=com.apple.main-thread:
frame #0: a.out`c at main.c:39
frame #1: a.out`a at main.c:27
frame #2: a.out`main at main.c:50
frame #3: a.out`start
c called from a
Stopped at c() with immediate caller as a().
a(1) returns 4
b(2) returns 5
Process 20420 Stopped
* thread #1: tid = 0x2e03, 0x0000000100000de8 a.out`c + 7 at main.c:39, stop reason = breakpoint 1.1, queue = com.apple.main-thread
36
37 int c(int val)
38 {
39 -> return val + 3;
40 }
41
42 int main (int argc, char const *argv[])
(lldb) bt
bt
thread #1: tid = 0x2e03, stop reason = breakpoint 1.1, queue = com.apple.main-thread
frame #0: 0x0000000100000de8 a.out`c + 7 at main.c:39
frame #1: 0x0000000100000dbc a.out`a + 44 at main.c:27
frame #2: 0x0000000100000e4b a.out`main + 91 at main.c:50
frame #3: 0x0000000100000d88 a.out`start + 52
(lldb) c
c
Resuming process 20420
Process 20420 Exited
a(3) returns 6
(lldb)
llvm-svn: 113596
The Unwind and RegisterContext subclasses still need
to be finished; none of this code is used by lldb at
this point (unless you call into it by hand).
The ObjectFile class now has an UnwindTable object.
The UnwindTable object has a series of FuncUnwinders
objects (Function Unwinders) -- one for each function
in that ObjectFile we've backtraced through during this
debug session.
The FuncUnwinders object has a few different UnwindPlans.
UnwindPlans are a generic way of describing how to find
the canonical address of a given function's stack frame
(the CFA idea from DWARF/eh_frame) and how to restore the
caller frame's register values, if they have been saved
by this function.
UnwindPlans are created from different sources. One source is the
eh_frame exception handling information generated by the compiler
for unwinding an exception throw. Another source is an assembly
language inspection class (UnwindAssemblyProfiler, uses the Plugin
architecture) which looks at the instructions in the funciton
prologue and describes the stack movements/register saves that are
done.
Two additional types of UnwindPlans that are worth noting are
the "fast" stack UnwindPlan which is useful for making a first
pass over a thread's stack, determining how many stack frames there
are and retrieving the pc and CFA values for each frame (enough
to create StackFrameIDs). Only a minimal set of registers is
recovered during a fast stack walk.
The final UnwindPlan is an architectural default unwind plan.
These are provided by the ArchDefaultUnwindPlan class (which uses
the plugin architecture). When no symbol/function address range can
be found for a given pc value -- when we have no eh_frame information
and when we don't have a start address so we can't examine the assembly
language instrucitons -- we have to make a best guess about how to
unwind. That's when we use the architectural default UnwindPlan.
On x86_64, this would be to assume that rbp is used as a stack pointer
and we can use that to find the caller's frame pointer and pc value.
It's a last-ditch best guess about how to unwind out of a frame.
There are heuristics about when to use one UnwindPlan versues the other --
this will all happen in the still-begin-written UnwindLLDB subclass of
Unwind which runs the UnwindPlans.
llvm-svn: 113581
Make get/set variable at the debugger level always set the particular debugger's instance variables rather than
the default variables.
llvm-svn: 113474
handles user settable internal variables (the equivalent of set/show
variables in gdb). In addition to the basic infrastructure (most of
which is defined in UserSettingsController.{h,cpp}, there are examples
of two classes that have been set up to contain user settable
variables (the Debugger and Process classes). The 'settings' command
has been modified to be a command-subcommand structure, and the 'set',
'show' and 'append' commands have been moved into this sub-commabnd
structure. The old StateVariable class has been completely replaced
by this, and the state variable dictionary has been removed from the
Command Interpreter. Places that formerly accessed the state variable
mechanism have been modified to access the variables in this new
structure instead (checking the term-width; getting/checking the
prompt; etc.)
Variables are attached to classes; there are two basic "flavors" of
variables that can be set: "global" variables (static/class-wide), and
"instance" variables (one per instance of the class). The whole thing
has been set up so that any global or instance variable can be set at
any time (e.g. on start up, in your .lldbinit file), whether or not
any instances actually exist (there's a whole pending and default
values mechanism to help deal with that).
llvm-svn: 113041
might dump file paths that allows the dumping of full paths or just the
basenames. Switched the stack frame dumping code to use just the basenames for
the files instead of the full path.
Modified the StackID class to no rely on needing the start PC for the current
function/symbol since we can use the SymbolContextScope to uniquely identify
that, unless there is no symbol context scope. In that case we can rely upon
the current PC value. This saves the StackID from having to calculate the
start PC when the StackFrame::GetStackID() accessor is called.
Also improved the StackID less than operator to correctly handle inlined stack
frames in the same stack.
llvm-svn: 112867
function statics, file globals and static variables) that a frame contains.
The StackFrame objects can give out ValueObjects instances for
each variable which allows us to track when a variable changes and doesn't
depend on variable names when getting value objects.
StackFrame::GetVariableList now takes a boolean to indicate if we want to
get the frame compile unit globals and static variables.
The value objects in the stack frames can now correctly track when they have
been modified. There are a few more tweaks needed to complete this work. The
biggest issue is when stepping creates partial stacks (just frame zero usually)
and causes previous stack frames not to match up with the current stack frames
because the previous frames only has frame zero. We don't really want to
require that all previous frames be complete since stepping often must check
stack frames to complete their jobs. I will fix this issue tomorrow.
llvm-svn: 112800
expressions. Values used by the expression are
checked by validation functions which cause the
program to crash if the values are unsafe.
Major changes:
- Added IRDynamicChecks.[ch], which contains the
core code related to this feature
- Modified CommandObjectExpression to install the
validator functions into the target process.
- Added an accessor to Process that gets/sets the
helper functions
llvm-svn: 112690
The goal is to separate the parser's data from the data
belonging to the parser's clients. This allows clients
to use the parser to obtain (for example) a JIT compiled
function or some DWARF code, and then discard the parser
state.
Previously, parser state was held in ClangExpression and
used liberally by ClangFunction, which inherited from
ClangExpression. The main effects of this refactoring
are:
- reducing ClangExpression to an abstract class that
declares methods that any client must expose to the
expression parser,
- moving the code specific to implementing the "expr"
command from ClangExpression and
CommandObjectExpression into ClangUserExpression,
a new class,
- moving the common parser interaction code from
ClangExpression into ClangExpressionParser, a new
class, and
- making ClangFunction rely only on
ClangExpressionParser and not depend on the
internal implementation of ClangExpression.
Side effects include:
- the compiler interaction code has been factored
out of ClangFunction and is now in an AST pass
(ASTStructExtractor),
- the header file for ClangFunction is now fully
documented,
- several bugs that only popped up when Clang was
deallocated (which never happened, since the
lifetime of the compiler was essentially infinite)
are now fixed, and
- the developer-only "call" command has been
disabled.
I have tested the expr command and the Objective-C
step-into code, which use ClangUserExpression and
ClangFunction, respectively, and verified that they
work. Please let me know if you encounter bugs or
poor documentation.
llvm-svn: 112249
bt all
show the backtrace for all threads, and:
bt 1 3 4
show the backtrace for threads 1, 3 and 4. If we want to come up with some fancier syntax for thread lists later, that will be great, but this will do for now.
llvm-svn: 112248
complex inlined examples.
StackFrame classes don't have a "GetPC" anymore, they have "GetFrameCodeAddress()".
This is because inlined frames will have a PC value that is the same as the
concrete frame that owns the inlined frame, yet the code locations for the
frame can be different. We also need to be able to get the real PC value for
a given frame so that variables evaluate correctly. To get the actual PC
value for a frame you can use:
addr_t pc = frame->GetRegisterContext()->GetPC();
Some issues with the StackFrame stomping on its own symbol context were
resolved which were causing the information to change for a frame when the
stack ID was calculated. Also the StackFrame will now correctly store the
symbol context resolve flags for any extra bits of information that were
looked up (if you ask for a block only and you find one, you will alwasy have
the compile unit and function).
llvm-svn: 111964
which is now on by default. Frames are gotten from the unwinder as concrete
frames, then if inline frames are to be shown, extra information to track
and reconstruct these frames is cached with each Thread and exanded as needed.
I added an inline height as part of the lldb_private::StackID class, the class
that helps us uniquely identify stack frames. This allows for two frames to
shared the same call frame address, yet differ only in inline height.
Fixed setting breakpoint by address to not require addresses to resolve.
A quick example:
% cat main.cpp
% ./build/Debug/lldb test/stl/a.out
Current executable set to 'test/stl/a.out' (x86_64).
(lldb) breakpoint set --address 0x0000000100000d31
Breakpoint created: 1: address = 0x0000000100000d31, locations = 1
(lldb) r
Launching 'a.out' (x86_64)
(lldb) Process 38031 Stopped
* thread #1: tid = 0x2e03, pc = 0x0000000100000d31, where = a.out`main [inlined] std::string::_M_data() const at /usr/include/c++/4.2.1/bits/basic_string.h:280, stop reason = breakpoint 1.1, queue = com.apple.main-thread
277
278 _CharT*
279 _M_data() const
280 -> { return _M_dataplus._M_p; }
281
282 _CharT*
283 _M_data(_CharT* __p)
(lldb) bt
thread #1: tid = 0x2e03, stop reason = breakpoint 1.1, queue = com.apple.main-thread
frame #0: pc = 0x0000000100000d31, where = a.out`main [inlined] std::string::_M_data() const at /usr/include/c++/4.2.1/bits/basic_string.h:280
frame #1: pc = 0x0000000100000d31, where = a.out`main [inlined] std::string::_M_rep() const at /usr/include/c++/4.2.1/bits/basic_string.h:288
frame #2: pc = 0x0000000100000d31, where = a.out`main [inlined] std::string::size() const at /usr/include/c++/4.2.1/bits/basic_string.h:606
frame #3: pc = 0x0000000100000d31, where = a.out`main [inlined] operator<< <char, std::char_traits<char>, std::allocator<char> > at /usr/include/c++/4.2.1/bits/basic_string.h:2414
frame #4: pc = 0x0000000100000d31, where = a.out`main + 33 at /Volumes/work/gclayton/Documents/src/lldb/test/stl/main.cpp:14
frame #5: pc = 0x0000000100000d08, where = a.out`start + 52
Each inline frame contains only the variables that they contain and each inlined
stack frame is treated as a single entity.
llvm-svn: 111877
expression parser. There shouldn't be four separate
classes encapsulating a variable.
ClangExpressionVariable is now meant to be the
container for all variable information. It has
several optional components that hold data for
different subsystems.
ClangPersistentVariable has been removed; we now
use ClangExpressionVariable instead.
llvm-svn: 111600
additional (ComandReturnObject *) result parameter (default to NULL) and does
the right thing in setting the result status.
Also removed used variable ast_context.
llvm-svn: 110992
expression. It is now possible to do things like this:
(lldb) expr int $i = 5; $i + 1
$0 = (int) 6
(lldb) expr $i + 3
$1 = (int) 8
(lldb) expr $1 + $0
$2 = (int) 14
As a bonus, this allowed us to move printing of
expression results into the ClangPersistentVariable
class. This code needs a bit of refactoring -- in
particular, ClangExpressionDeclMap has eaten one too
many bacteria and needs to undergo mitosis -- but the
infrastructure appears to be holding up nicely.
llvm-svn: 110896
expression parser. It is now possible to type:
(lldb) expr int $i = 5; $i + 1
(int) 6
(lldb) expr $i + 2
(int) 7
The skeleton for automatic result variables is
also implemented. The changes affect:
- the process, which now contains a
ClangPersistentVariables object that holds
persistent variables associated with it
- the expression parser, which now uses
the persistent variables during variable
lookup
- TaggedASTType, where I loaded some commonly
used tags into a header so that they are
interchangeable between different clients of
the class
llvm-svn: 110777
Arrange that this then gets properly set on attach, or when a "file" is set.
Add a completer for "process attach -n".
Caveats: there isn't currently a way to handle multiple processes with the same name. That
will have to wait on a way to pass annotations along with the completion strings.
llvm-svn: 110624
made IR-based expression evaluation the default.
Also added a new class to hold persistent variables.
The class is empty as yet while I write up a design
document for what it will do. Also the place where
it is currently created (by the Expression command)
is certainly wrong.
llvm-svn: 110415
This will allow debugger plug-ins to make any instance of "lldb_private::StopInfo"
that can completely describe any stop reason. It also provides a framework for
doing intelligent things with the stop info at important times in the lifetime
of the inferior.
Examples include the signal stop info in StopInfoUnixSignal. It will check with
the process to see that the current action is for the signal. These actions
include wether to stop for the signal, wether the notify that the signal was
hit, and wether to pass the signal along to the inferior process. The
StopInfoUnixSignal class overrides the "ShouldStop()" method of StopInfo and
this allows the stop info to determine if it should stop at the signal or
continue the process.
StopInfo subclasses must override the following functions:
virtual lldb::StopReason
GetStopReason () const = 0;
virtual const char *
GetDescription () = 0;
StopInfo subclasses can override the following functions:
// If the subclass returns "false", the inferior will resume. The default
// version of this function returns "true" which means the default stop
// info will stop the process. The breakpoint subclass will check if
// the breakpoint wants us to stop by calling any installed callback on
// the breakpoint, and also checking if the breakpoint is for the current
// thread. Signals will check if they should stop based off of the
// UnixSignal settings in the process.
virtual bool
ShouldStop (Event *event_ptr);
// Sublasses can state if they want to notify the debugger when "ShouldStop"
// returns false. This would be handy for breakpoints where you want to
// log information and continue and is also used by the signal stop info
// to notify that a signal was received (after it checks with the process
// signal settings).
virtual bool
ShouldNotify (Event *event_ptr)
{
return false;
}
// Allow subclasses to do something intelligent right before we resume.
// The signal class will figure out if the signal should be propagated
// to the inferior process and pass that along to the debugger plug-ins.
virtual void
WillResume (lldb::StateType resume_state)
{
// By default, don't do anything
}
The support the Mach exceptions was moved into the lldb/source/Plugins/Process/Utility
folder and now doesn't polute the lldb_private::Thread class with platform
specific code.
llvm-svn: 110184
involved watching for the objective C built-in types in DWARF and making sure
when we convert the DWARF types into clang types that we use the appropriate
ASTContext types.
Added a way to find and dump types in lldb (something equivalent to gdb's
"ptype" command):
image lookup --type <TYPENAME>
This only works for looking up types by name and won't work with variables.
It also currently dumps out verbose internal information. I will modify it
to dump more appropriate user level info in my next submission.
Hookup up the "FindTypes()" functions in the SymbolFile and SymbolVendor so
we can lookup types by name in one or more images.
Fixed "image lookup --address <ADDRESS>" to be able to correctly show all
symbol context information, but it will only show this extra information when
the new "--verbose" flag is used.
Updated to latest LLVM to get a few needed fixes.
llvm-svn: 110089
lldb_private::Language class into the enumerations header so it can be freely
used by other interfaces.
Added correct objective C class support to the DWARF symbol parser. Prior to
this fix we were parsing objective C classes as C++ classes and now that the
expression parser is ready to call functions we need to make sure the objective
C classes have correct AST types.
llvm-svn: 109574
it returns a list of functions as a SymbolContextList.
Rewrote the clients of SymbolContext to use this
SymbolContextList.
Rewrote some of the providers of the data to SymbolContext
to make them respect preferences as to whether the list
should be cleared first; propagated that change out.
ClangExpressionDeclMap and ClangASTSource use this new
function list to properly generate function definitions -
even for functions that don't have a prototype in the
debug information.
llvm-svn: 109476
- When we JIT an expression, we print the disassembly
of the generated code
- When we put the structure into the target, we print
the individual entries in the structure byte for
byte.
llvm-svn: 109278
to be executed by the inferior. This required explicit support
from RecordingMemoryManager for finding the address range
belonging to a particular function.
Also fixed a bug in DisassemblerLLVM where the disassembler
assumed there was an AddressRange available even when it was
NULL.
llvm-svn: 109209
and moved it to its own header file for cleanliness.
Added more logging to ClangFunction so that we can
diagnose crashes in the executing expression.
Added code to extract the result of the expression
from the struct that is passed to the JIT-compiled
code.
llvm-svn: 109199
defines that are in "llvm/Support/MachO.h". This should allow ObjectFileMachO
and ObjectContainerUniversalMachO to be able to be cross compiled in Linux.
Also did some cleanup on the ASTType by renaming it to ClangASTType and
renaming the header file. Moved a lot of "AST * + opaque clang type *"
functionality from lldb_private::Type over into ClangASTType.
llvm-svn: 109046
used by the JIT compiled expression, including the
result of the expression.
Also added a new class, ASTType, which encapsulates an
opaque Clang type and its associated AST context.
Refactored ClangExpressionDeclMap to use ASTTypes,
significantly reducing the possibility of mixups of
types from different AST contexts.
llvm-svn: 108965
to correctly unfold constant-folded global variables.
Also added code to JIT the expression. Simple
expressions are now JIT compiled successfully.
llvm-svn: 108380
This relies on ThreadPlanStepOut working correctly, which it doesn't currently for Inlined functions, so this feature is only partially useful until we take care of Stepping Out of inlined functions.
Added an option to "thread step-in" to set the avoid regular expression. This is mostly for testing, once the Setting code is redone, we'll move this to a general setting.
llvm-svn: 108036
enabled LLVM make style building and made this compile LLDB on Mac OS X. We
can now iterate on this to make the build work on both linux and macosx.
llvm-svn: 108009
Move the "source", "alias", and "unalias" commands to "commands *".
Move "source-file" to "source list".
Added a "source info" command but it isn't implemented yet.
llvm-svn: 107751
instead of the last history item to provide a command for the "empty" command.
Use this in the source-file command to make <RETURN> continue the listing rather
than relist the first listing...
llvm-svn: 107736
interface so everybody does it the same way. Add an "exact" lookup for internal uses.
Fix up a few little cases where we weren't reporting command lookup errors correctly.
Added "b" as an alias for "breakpoint" so it doesn't collide with "bt".
llvm-svn: 107718
prepare IR for execution in the target. Wired the
expression command to use this IR transformer when
conversion to DWARF fails, and wired conversion to
DWARF to always fail (well, we don't generate any
DWARF...)
llvm-svn: 107559
an expression, adding code to put the value of the
last expression (if there is one) into a variable
and write the address of that variable to a global
pointer.
llvm-svn: 107419
Added the ability to read memory from the target's object files when we aren't
running, so disassembling works before you run!
Cleaned up the API to lldb_private::Target::ReadMemory().
Cleaned up the API to the Disassembler to use actual "lldb_private::Address"
objects instead of just an "addr_t". This is nice because the Address objects
when resolved carry along their section and module which can get us the
object file. This allows Target::ReadMemory to be used when we are not
running.
Added a new lldb_private::Address dump style: DumpStyleDetailedSymbolContext
This will show a full breakdown of what an address points to. To see some
sample output, execute a "image lookup --address <addr>".
Fixed SymbolContext::DumpStopContext(...) to not require a live process in
order to be able to print function and symbol offsets.
llvm-svn: 107350
Add a way for the completers to say whether the completed argument should have a space inserted after is
or not.
Added the file name completer to the "file" command.
llvm-svn: 107247
Added the ability to dump any file in the global module cache using any of
the "image dump" commands. This allows us to dump the .o files that are used
with DWARF + .o since they don't belong the the target list for the current
target.
llvm-svn: 107100
intelligently. The four name types we currently have are:
eFunctionNameTypeFull = (1 << 1), // The function name.
// For C this is the same as just the name of the function
// For C++ this is the demangled version of the mangled name.
// For ObjC this is the full function signature with the + or
// - and the square brackets and the class and selector
eFunctionNameTypeBase = (1 << 2), // The function name only, no namespaces or arguments and no class
// methods or selectors will be searched.
eFunctionNameTypeMethod = (1 << 3), // Find function by method name (C++) with no namespace or arguments
eFunctionNameTypeSelector = (1 << 4) // Find function by selector name (ObjC) names
this allows much more flexibility when setting breakoints:
(lldb) breakpoint set --name main --basename
(lldb) breakpoint set --name main --fullname
(lldb) breakpoint set --name main --method
(lldb) breakpoint set --name main --selector
The default:
(lldb) breakpoint set --name main
will inspect the name "main" and look for any parens, or if the name starts
with "-[" or "+[" and if any are found then a full name search will happen.
Else a basename search will be the default.
Fixed some command option structures so not all options are required when they
shouldn't be.
Cleaned up the breakpoint output summary.
Made the "image lookup --address <addr>" output much more verbose so it shows
all the important symbol context results. Added a GetDescription method to
many of the SymbolContext objects for the more verbose output.
llvm-svn: 107075
- Rationalized EvaluateExpression to remove a lot
of nesting; also added comments to make it easy
to find what's happening where
- Made ExecuteRawCommandString subcontract out to
EvaluateExpression
- Minor logging improvements
llvm-svn: 106703
to the debugger from GUI windows. Previously there was one global debugger
instance that could be accessed that had its own command interpreter and
current state (current target/process/thread/frame). When a GUI debugger
was attached, if it opened more than one window that each had a console
window, there were issues where the last one to setup the global debugger
object won and got control of the debugger.
To avoid this we now create instances of the lldb_private::Debugger that each
has its own state:
- target list for targets the debugger instance owns
- current process/thread/frame
- its own command interpreter
- its own input, output and error file handles to avoid conflicts
- its own input reader stack
So now clients should call:
SBDebugger::Initialize(); // (static function)
SBDebugger debugger (SBDebugger::Create());
// Use which ever file handles you wish
debugger.SetErrorFileHandle (stderr, false);
debugger.SetOutputFileHandle (stdout, false);
debugger.SetInputFileHandle (stdin, true);
// main loop
SBDebugger::Terminate(); // (static function)
SBDebugger::Initialize() and SBDebugger::Terminate() are ref counted to
ensure nothing gets destroyed too early when multiple clients might be
attached.
Cleaned up the command interpreter and the CommandObject and all subclasses
to take more appropriate arguments.
llvm-svn: 106615
without having to use RTTI.
Removed the ThreadPlanContinue and replaced with a ShouldAutoContinue query that serves the same purpose. Having to push
another plan to assert that if there's no other indication the target should continue when this plan is popped was flakey
and error prone. This method is more stable, and fixed problems we were having with thread specific breakpoints.
llvm-svn: 106378
Push this through all the breakpoint management code. Allow this to be set when the breakpoint is created.
Fix the Process classes so that a breakpoint hit that is not for a particular thread is not reported as a
breakpoint hit event for that thread.
Added a "breakpoint configure" command to allow you to reset any of the thread
specific options (or the ignore count.)
llvm-svn: 106078
Fixed the Disassemble arguments so you can't specify start address or name in multiple ways.
Fixed the command line input so you can specify the filename without "-f" even if you use other options.
llvm-svn: 106020
Greg Clayton