TableGen checks at compiletime that for scheduling models with
"CompleteModel = 1" one of the following holds:
- Is marked with the hasNoSchedulingInfo flag
- The instruction is a subclass of Sched
- There are InstRW definitions in the scheduling model
Typical steps necessary to complete a model:
- Ensure all pseudo instructions that are expanded before machine
scheduling (usually everything handled with EmitYYY() functions in
XXXTargetLowering).
- If a CPU does not support some instructions mark the corresponding
resource unsupported: "WriteRes<WriteXXX, []> { let Unsupported = 1; }".
- Add missing scheduling information.
Differential Revision: http://reviews.llvm.org/D17747
llvm-svn: 262384
This introduces a new flag that indicates that a specific instruction
will never be present when the MachineScheduler runs and therefore needs
no scheduling information.
This is in preparation for an upcoming commit which checks completeness
of a scheduling model when tablegen runs.
Differential Revision: http://reviews.llvm.org/D17728
llvm-svn: 262383
Previosy, if actual instruction have one of optional operands then other optional operands listed before this also should be presented.
For example instruction v_fract_f32 v0, v1, mul:2 have one optional operand - OMod and do not have optional operand clamp. Previously this was not allowed because clamp is listed before omod in AsmString:
string AsmString = "v_fract_f32$vdst, $src0_modifiers$clamp$omod";
Making this work required some hacks (both OMod and Clamp match classes have same PredicateMethod).
Now, if MatchInstructionImpl meets formal optional operand that is not presented in actual instruction it skips this formal operand and tries to match current actual operand with next formal.
Patch by: Sam Kolton
Review: http://reviews.llvm.org/D17568
[AMDGPU] Assembler: Check immediate types for several optional operands in predicate methods
With this change you should place optional operands in order specified by asm string:
clamp -> omod
offset -> glc -> slc -> tfe
Fixes for several tests.
Depends on D17568
Patch by: Sam Kolton
Review: http://reviews.llvm.org/D17644
llvm-svn: 262314
Combinations of suffixes that look useful are actually ignored;
complaining about them will avoid mistakes.
Differential Revision: http://reviews.llvm.org/D17587
llvm-svn: 262263
Combinations of suffixes that look useful actually are ignored;
complaining about them will avoid mistakes.
Differential Revision: http://reviews.llvm.org/D17587
llvm-svn: 262092
Patch by Jack Howarth.
When linking to libLLVM, don't also link to the component
libraries that constitute libLLVM.
Differential Revision: http://reviews.llvm.org/D16945
llvm-svn: 260641
Currently you can't specify node properties like commutativity on
a PatFrag. If you want to create a PatFrag on a commutative node
with a hasOneUse predicate, this enables you to specify that the
PatFrag is also commutable.
llvm-svn: 260404
Summary:
This patch adds Windows support for a few of the llvm-config commands,
including cflags, ldflags, libs, and system-libs.
Currently llvm-config is untested, so this patch adds tests for the
commands that it fixes as well.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16762
llvm-svn: 260263
Summary:
This makes it possible to specify some operands as optional to the AsmMatcher.
Setting this field to true will prevent the AsmMatcher from emitting
'too few operands' errors when there are missing optional operands.
Reviewers: olista01, ab
Subscribers: nhaustov, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D15755
llvm-svn: 259913
Fix the lit bug that enabled this "feature" (empty triple is substring
of all possible target triples) and change the two outliers to use the
documented * syntax.
llvm-svn: 259799
Summary:
This patch adds a reserve call to an expensive function
(`llvm::LoadIntrinsics`), and may fix a few other low hanging
performance fruit (I've put them in comments for now, so we can
discuss).
**Motivation:**
As I'm sure other developers do, when I build LLVM, I build the entire
project with the same config (`Debug`, `MinSizeRel`, `Release`, or
`RelWithDebInfo`). However, the `Debug` config also builds llvm-tblgen
in `Debug` mode. Later build steps that run llvm-tblgen then can
actually be the slowest steps in the entire build. Nobody likes slow
builds.
Reviewers: rnk, dblaikie
Differential Revision: http://reviews.llvm.org/D16832
Patch by Alexander G. Riccio
llvm-svn: 259683
Summary:
This adds a new attribute which targets can set in TableGen which causes a function to be generated which matches register alternative names. This is very similar to `ShouldEmitMatchRegisterName`, except it works on alt names.
This patch is currently used by the out of tree part of the AVR backend. It reduces code duplication greatly, and has the effect that you do not need to hardcode altname to register mappings in C++.
It will not work on targets which have registers which share the same aliases.
Reviewers: stoklund, arsenm, dsanders, hfinkel, vkalintiris
Subscribers: hfinkel, dylanmckay, llvm-commits
Differential Revision: http://reviews.llvm.org/D16312
llvm-svn: 259636
Summary:
r257791 disabled the test-suite export since the addition of CMakeLists.txt was
causing build failures. This patch exports the test-suite again but does so
outside the source tree so that it isn't included in the Phase[123] builds.
Reviewers: hans
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16679
llvm-svn: 259094
Strip dos line endings from llc generated files to allow the regex patterns to match them.
Ensure updated *.ll files are generated with unix style line endings.
llvm-svn: 258987
If a lit test has a RUN line that includes a redirection to "/dev/tty", the
redirection goes to the special device file corresponding to the console. It
is /dev/tty on UNIX-like systems and "CON" on Windows.
This patch is needed to implement a test like PR25717 (caused by the size limit
of the Windows system call WriteConsole() prior to Windows 8) where the test
only breaks when outputing to the console and won't fail if using a pipe.
llvm-svn: 258898
This brings the compile time of Function.cpp from ~40s down to ~4s for
me locally. It also shaves off about 400KB of object file size in a
release+asserts build.
I also realized that the AMDGPU backend does not have any GCC builtin
names to match, so the extra lookup was a no-op. I removed it to silence
a zero-length string table array warning. There should be no functional
change here.
This change really ends the story of PR11951.
llvm-svn: 258897
Here, sed is used to prepare object files for comparison via cmp. On my Darwin
15.4.0 machine, LC_CTYPE is set to UTF-8 (by default, I believe). Under these
circumstances, anything sed is made to read will be treated as UTF-8, prompting
it to signal an error if it is not, like so:
% sed s/a/b/ <(head -n1 /dev/random) >/dev/null; echo $?
sed: RE error: illegal byte sequence
1
%
To make sed work as expected, I need to set LC_CTYPE to C:
% env LC_CTYPE=C sed s/a/b/ <(head -n1 /dev/random) >/dev/null; echo $?
0
%
Without this change, sed will exit with an error for every single file that it
compares between phase 2 and phase 3, thereby making it look as if the
differences were far larger than they are.
Patch by Elias Pipping!
Differential Revision: http://reviews.llvm.org/D16548
llvm-svn: 258891
The AMDGPU backend was the last user of the old StringMatcher
recognition code. Move it over to the new lookupLLVMIntrinsicName
funciton, which is now improved to handle all of the interesting edge
cases exposed by AMDGPU intrinsic names.
llvm-svn: 258875
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
Step one towards using a simple binary search to lookup intrinsic IDs
instead of our crazy table generated switch+memcmp+startswith code that
makes Function.cpp take about a minute to compile. See PR24785 and
PR11951 for why we should do this.
The X86 backend contains tables that need to be sorted on intrinsic ID,
so reorder those.
llvm-svn: 258757
This is a fix for https://llvm.org/bugs/show_bug.cgi?id=22796.
The previous implementation of ClassInfo::operator< allowed cycles of classes
such that x < y < z < x, meaning that a list of them cannot be correctly
sorted, and the sort order could differ with different standard libraries.
The original implementation sorted classes by ValueName if they were otherwise
equal. This isn't strictly necessary, but some backends seem to accidentally
rely on it. If I reverse this comparison I get 8 test failures spread across
the AArch64, Mips and X86 backends, so I have left it in until those backends
can be fixed.
There was one case in the X86 backend where the observable behaviour of the
assembler is changed by this patch. This was because some of the memory asm
operands were not marked as children of X86MemAsmOperand.
Differential Revision: http://reviews.llvm.org/D16141
llvm-svn: 258677
Craig Topper