Now assembler generates two consecutive `.4byte` directives to store
64-bit `li.d' operand. The first directive stores high 4-byte of the
value. The second directive stores low 4-byte of the value. But on
64-bit system we load this value at once and get wrong result if the
system is little-endian.
This patch fixes the bug. It stores the `li.d' operand as a single
8-byte value.
Differential Revision: https://reviews.llvm.org/D68778
llvm-svn: 374598
If `li.s` or `li.d` loads zero into a FPR, it's not necessary to load
zero into `at` GPR register and then move its value into a floating
point register. We can use as a source register the `zero / $0` one.
Differential Revision: https://reviews.llvm.org/D68777
llvm-svn: 374597
If a "double" (64-bit) value has zero low 32-bits, it's possible to load
such value into a GP/FP registers as an instruction immediate. But now
assembler loads only high 32-bits of the value.
For example, if a target register is GPR the `li.d $4, 1.0` instruction
converts into the `lui $4, 16368` one. As a result, we get `0x3FF00000`
in the register. While a correct representation of the `1.0` value is
`0x3FF0000000000000`. The patch fixes that.
Differential Revision: https://reviews.llvm.org/D68776
llvm-svn: 374544
J/JAL/JALX/JALS are absolute branches, but stay within the current
256 MB-aligned region, so we must include the high bits of the
instruction address when calculating the branch target.
Patch by James Clarke.
Differential Revision: https://reviews.llvm.org/D68548
llvm-svn: 373906
In case of using 32-bit GOT access to the table requires two instructions
with attached %got_hi and %got_lo relocations. This patch implements
correct expansion of 'lw/sw' instructions in that case.
Differential Revision: https://reviews.llvm.org/D67705
llvm-svn: 372251
When a "base" in the `lw/sw $reg1, symbol($reg2)` instruction is
a register and generated code is position independent, backend
does not add the "base" value to the symbol address.
```
lw $reg1, %got(symbol)($gp)
lw/sw $reg1, 0($reg1)
```
This patch fixes the bug and adds the missed `addu` instruction by
passing `BaseReg` into the `loadAndAddSymbolAddress` routine and handles
the case when the `BaseReg` is the zero register to escape redundant
`move reg, reg` instruction:
```
lw $reg1, %got(symbol)($gp)
addu $reg1, $reg1, $reg2
lw/sw $reg1, 0($reg1)
```
Differential Revision: https://reviews.llvm.org/D66894
llvm-svn: 370353
Now `lw/sw $reg, sym+offset` pseudo instructions for global symbol `sym`
are lowering into the following three instructions.
```
lw $reg, %got(symbol)($gp)
addiu $reg, $reg, offset
lw/sw $reg, 0($reg)
```
It's possible to reduce the number of instructions by taking the offset
in account in the final `lw/sw` command. This patch implements that
optimization.
```
lw $reg, %got(symbol)($gp)
lw/sw $reg, offset($reg)
```
Differential Revision: https://reviews.llvm.org/D66553
llvm-svn: 369756
Now pseudo instruction `la $6, symbol+8($6)` is expanding into the following
chain of commands:
```
lw $1, %got(symbol+8)($gp)
addiu $1, $1, 8
addu $6, $1, $6
```
This is incorrect. When a linker handles the `R_MIPS_GOT16` relocation,
it does not expect to get any addend and breaks on assertion. Otherwise
it has to create new GOT entry for each unique "sym + offset" pair.
Offset for a global symbol should be added to result of loading GOT
entry by a separate `add` command.
The patch fixes the problem by stripping off an offset from the expression
passed to the `%got`. That's interesting that even current code inserts
a separate `add` command.
Differential Revision: https://reviews.llvm.org/D66552
llvm-svn: 369755
Function MipsAsmParser::expandMemInst() did not properly handle
instruction `sc` with a symbol as an argument because first argument
would be counted twice. We add additional checks and handle this case
separately.
Patch by Mirko Brkusanin.
Differential Revision: https://reviews.llvm.org/D64252
llvm-svn: 368160
If an operand of the `lw/sw` instructions is a symbol, these instructions
incorrectly lowered using not-position-independent chain of commands.
For PIC code we should use `lw/addiu` instructions with the `R_MIPS_GOT16`
and `R_MIPS_LO16` relocations respectively. Instead of that LLVM generates
position dependent code with the `R_MIPS_HI16` and `R_MIPS_LO16`
relocations.
This patch provides a fix for the bug by handling PIC case separately in
the `MipsAsmParser::expandMemInst`. The main idea is to generate a chain
of PIC instructions to load a symbol address into a register and then
load the address content.
The fix is not optimal and does not fix all PIC-related problems. This
is a task for subsequent patches.
Differential Revision: https://reviews.llvm.org/D65524
llvm-svn: 367580
This reverts commit r366686 as it appears to be causing buildbot
failures on sanitizer-x86_64-linux-android and sanitizer-x86_64-linux.
llvm-svn: 366708
This patch was not the reason of the buildbot failure.
Deleted code was introduced as a work around for a bug in the gold linker
(http://sourceware.org/PR16794). Test case that was given as a reason for
this part of code, the one on previous link, now works for the gold.
This condition is too strict and when a code is compiled with debug info
it forces generation of numerous relocations with symbol for architectures
that do not have relocation addend.
Reviewers: arsenm, espindola
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D64327
llvm-svn: 366686
This directive forces to use the alternate register for context pointer.
For example, this code:
.cplocal $4
jal foo
expands to:
ld $25, %call16(foo)($4)
jalr $25
Differential Revision: https://reviews.llvm.org/D64743
llvm-svn: 366300
Deleted code was introduced as a work around for a bug in the gold linker
(http://sourceware.org/PR16794). Test case that was given as a reason for
this part of code, the one on previous link, now works for the gold.
This condition is too strict and when a code is compiled with debug info
it forces generation of numerous relocations with symbol for architectures
that do not have relocation addend.
Reviewers: arsenm, espindola
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D64327
llvm-svn: 365618
The `sge/sgeu Dst, Src1, Src2/Imm` pseudo instructions set register
`Dst` to 1 if register `Src1` is greater than or equal `Src2/Imm` and
to 0 otherwise.
Differential Revision: https://reviews.llvm.org/D64314
llvm-svn: 365476
The `sgt/sgtu Dst, Src1, Src2/Imm` pseudo instructions set register
`Dst` to 1 if register `Src1` is greater than `Src2/Imm` and to 0 otherwise.
Differential Revision: https://reviews.llvm.org/D64313
llvm-svn: 365475
Add support for s.d instruction for Mips1 which expands into two swc1
instructions.
Patch by Mirko Brkusanin.
Differential Revision: https://reviews.llvm.org/D63199
llvm-svn: 363184
LLVM previously used `DW_CFA_def_cfa` instruction in .eh_frame to set
the register and offset for current CFA rule. We change it to
`DW_CFA_def_cfa_register` which is the same one used by GAS that only
changes the register but keeping the old offset.
Patch by Mirko Brkusanin.
Differential Revision: https://reviews.llvm.org/D61899
llvm-svn: 360765
-t is --symbols in llvm-readobj but --section-details (unimplemented) in readelf.
The confusing option should not be used since we aim for improving
compatibility.
Keep just one llvm-readobj -t use case in test/tools/llvm-readobj/symbols.test
llvm-svn: 359661
We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
llvm-svn: 359649
Switch to the `MCParserUtils::parseAssignmentExpression` for parsing
assignment expressions in the `.set` directive reduces code and allows
to print an error message instead of crashing in case of incorrect
recursive using of the `.set`.
Fix for the bug https://bugs.llvm.org/show_bug.cgi?id=41053.
Differential Revision: http://reviews.llvm.org/D59452
llvm-svn: 356461
To provide mapping between standard and microMIPS R6 variants of the
`sw` command we have to rename SWSP_xxx commands from "sw" to "swsp".
Otherwise `tablegen` starts to show the error `Multiple matches found
for `SW'`. After that to restore printing SWSP command as `sw`, I add
an appropriate `MipsInstAlias` instance.
We also need to implement "size reduction" for microMIPS R6. But this
task is for separate patch. After that the `micromips-lwsp-swsp.ll` test
case will be extended.
Differential Revision: http://reviews.llvm.org/D59046
llvm-svn: 356045
This is https://bugs.llvm.org/show_bug.cgi?id=37151,
GNU objdump spec says that "Normally the disassembly output will skip blocks of zeroes.",
but currently, llvm-objdump prints them.
The patch implements the -z/--disassemble-zeroes option and switches the default to always
skip blocks of zeroes.
Differential revision: https://reviews.llvm.org/D56083
llvm-svn: 350823
The following code requests 64-bit PC-relative relocations unsupported
by MIPS ABI. Now it triggers an assertion. It's better to show an error
message.
```
foo:
.quad bar - foo
```
llvm-svn: 350152
When replacing jal with jalr, also emit '.reloc R_MIPS_JALR' (R_MICROMIPS_JALR
for micromips). The linker might then be able to turn jalr into a direct
call.
Add '-mips-jalr-reloc' to enable/disable this feature (default is true).
Differential revision: https://reviews.llvm.org/D55292
llvm-svn: 348760
The test was reverted because it failed on
llvm-clang-x86_64-expensive-checks-win builder, and that was because
-DEXPENSIVE_CHECKS adds randomness to llvm::sort(), affecting the order of
relocation table entries.
Modified the test to not have two relocations at the same offset.
llvm-svn: 347476
R_MIPS_JALR/R_MICROMIPS_JALR can now be parsed in .s files and emitted to .o.
They are still not generated with JALR.
Differential revision: https://reviews.llvm.org/D54721
llvm-svn: 347398
Currently, expressions like
.reloc 1f, R_MIPS_JALR, foo
1: nop
are not allowed, ie. an offset in .reloc can only be absolute value.
This patch adds support for labels as offsets.
If offset is a forward declared label, MCObjectStreamer keeps the fixup locally
and adds it to the fixups vector after the label (and its offset) is defined.
label+number is not supported yet.
Differential revision: https://reviews.llvm.org/D53990
llvm-svn: 347397
The `sigrie` instruction signals a Reserved Instruction Exception.
This patch adds support for assembling / disassembling the instruction.
Differential Revision: http://reviews.llvm.org/D53861
llvm-svn: 346230
For O32 and N32 ABI FDE/CFI encoding should be `DW_EH_PE_sdata4` and only
N64 ABI uses `DW_EH_PE_sdata8`. To cover all cases this patch check code
pointer size and setup a correct FDE/CFI encoding type.
Differential revision: https://reviews.llvm.org/D52876
llvm-svn: 344040
CodePointerSize and CalleeSaveStackSlotSize values are used in DWARF
generation. In case of MIPS it's incorrect to check for Triple::isMIPS64()
only this function returns true for N32 ABI too.
Now we do not have a method to recognize N32 if it's specified by a command
line option and is not a part of a target triple. So we check for
Triple::GNUABIN32 only. It's better than nothing.
Differential revision: https://reviews.llvm.org/D52874
llvm-svn: 344039
Add support mips64(el)-linux-gnuabin32 triples, and set them to N32.
Debian architecture name mipsn32/mipsn32el are also added. Set
UseIntegratedAssembler for N32 if we can detect it.
Patch by YunQiang Su.
Differential revision: https://reviews.llvm.org/D51408
llvm-svn: 342416
This implements suggesting alternative mnemonics when an invalid one is
specified. For example `addru $9, $6, 17767` leads to the following
error message:
error: unknown instruction, did you mean: add, addiu, addu, maddu?
Differential revision: https://reviews.llvm.org/D40646
llvm-svn: 342119
Simon Atanasyan