This doesn't seem to have actually broken anything. It was paranoia
on my part. Trying again now that bots are more stable.
This is a follow up of the r198338 commit that added truncates for
lcssa phi nodes. Sinking the truncates below the phis cleans up the
loop and simplifies subsequent analysis within the indvars pass.
llvm-svn: 198678
This is a follow up of the r198338 commit that added truncates for
lcssa phi nodes. Sinking the truncates below the phis cleans up the
loop and simplifies subsequent analysis within the indvars pass.
llvm-svn: 198654
Now with a fix for PR18384: ValueHandleBase::ValueIsDeleted.
We need to invalidate SCEV's loop info when we delete a block, even if no values are hoisted.
llvm-svn: 198631
This commit was the source of crasher PR18384:
While deleting: label %for.cond127
An asserting value handle still pointed to this value!
UNREACHABLE executed at llvm/lib/IR/Value.cpp:671!
Reverting to get the builders green, feel free to re-land after fixing up.
(Renato has a handy isolated repro if you need it.)
This reverts commit r198478.
llvm-svn: 198503
getSCEV for an ashr instruction creates an intermediate zext
expression when it truncates its operand.
The operand is initially inside the loop, so the narrow zext
expression has a non-loop-invariant loop disposition.
LoopSimplify then runs on an outer loop, hoists the ashr operand, and
properly invalidate the SCEVs that are mapped to value.
The SCEV expression for the ashr is now an AddRec with the hoisted
value as the now loop-invariant start value.
The LoopDisposition of this wide value was properly invalidated during
LoopSimplify.
However, if we later get the ashr SCEV again, we again try to create
the intermediate zext expression. We get the same SCEV that we did
earlier, and it is still cached because it was never mapped to a
Value. When we try to create a new AddRec we abort because we're using
the old non-loop-invariant LoopDisposition.
I don't have a solution for this other than to clear LoopDisposition
when LoopSimplify hoists things.
I think the long-term strategy should be to perform LoopSimplify on
all loops before computing SCEV and before running any loop opts on
individual loops. It's possible we may want to rerun LoopSimplify on
individual loops, but it should rarely do anything, so rarely require
invalidating SCEV.
llvm-svn: 198478
The loop rerolling pass was failing with an assertion failure from a
failed cast on loops like this:
void foo(int *A, int *B, int m, int n) {
for (int i = m; i < n; i+=4) {
A[i+0] = B[i+0] * 4;
A[i+1] = B[i+1] * 4;
A[i+2] = B[i+2] * 4;
A[i+3] = B[i+3] * 4;
}
}
The code was casting the SCEV-expanded code for the new
induction variable to a phi-node. When the loop had a non-constant
lower bound, the SCEV expander would end the code expansion with an
add insted of a phi node and the cast would fail.
It looks like the cast to a phi node was only needed to get the
induction variable value coming from the backedge to compute the end
of loop condition. This patch changes the loop reroller to compare
the induction variable to the number of times the backedge is taken
instead of the iteration count of the loop. In other words, we stop
the loop when the current value of the induction variable ==
IterationCount-1. Previously, the comparison was comparing the
induction variable value from the next iteration == IterationCount.
This problem only seems to occur on 32-bit targets. For some reason,
the loop is not rerolled on 64-bit targets.
PR18290
llvm-svn: 198425
cycles
This allows the value equality check to work even if we don't have a dominator
tree. Also add some more comments.
I was worried about compile time impacts and did not implement reachability but
used the dominance check in the initial patch. The trade-off was that the
dominator tree was required.
The llvm utility function isPotentiallyReachable cuts off the recursive search
after 32 visits. Testing did not show any compile time regressions showing my
worries unjustfied.
No compile time or performance regressions at O3 -flto -mavx on test-suite +
externals.
Addresses review comments from r198290.
llvm-svn: 198400
When widening an IV to remove s/zext, we generally try to eliminate
the original narrow IV. However, LCSSA phi nodes outside the loop were
still using the original IV. Clean this up more aggressively to avoid
redundancy in generated code.
llvm-svn: 198338
When there are cycles in the value graph we have to be careful interpreting
"Value*" identity as "value" equivalence. We interpret the value of a phi node
as the value of its operands.
When we check for value equivalence now we make sure that the "Value*" dominates
all cycles (phis).
%0 = phi [%noaliasval, %addr2]
%l = load %ptr
%addr1 = gep @a, 0, %l
%addr2 = gep @a, 0, (%l + 1)
store %ptr ...
Before this patch we would return NoAlias for (%0, %addr1) which is wrong
because the value of the load is from different iterations of the loop.
Tested on x86_64 -mavx at O3 and O3 -flto with no performance or compile time
regressions.
PR18068
radar://15653794
llvm-svn: 198290
widespread glibc bugs.
The glibc implementation of exp10 has a very serious precision bug in
version 2.15 (and older versions). This is still very widely used (the
current Ubuntu LTS for example uses it) and so it isn't reasonable to
make transforms that produce these functions. This fixes many
miscompiles introduced when we started transforming pow(10.0, ...) into
exp10, and it may have fixed other latent miscompiles where exp10
provided sufficient precision but exp10f did not.
This is all really horrible. The primary bug has been fixed for over
a year and glibc 2.18 works correctly for the test cases I have, but it
will be 2017 before the LTS using 2.15 is no longer supported by Ubuntu
(and thus reasonable for folks to be relying on). =[ We're either going
to need to live without these optimizations, or find a way to switch
behavior more dynamically than using simply the fact that the OS is
"Linux".
To make matters worse, there appears to be significant testing and
fixing of numerous other bugs in the exp10 family of functions right now
in glibc. While those haven't been causing problems I've seen in the
wild, it gives me concerns that we may need to wait until an even later
release of glibc before we can reliably transform code into exp10.
llvm-svn: 198093
Split sadd.with.overflow into add + sadd.with.overflow to allow
analysis and optimization. This should ideally be done after
InstCombine, which can perform code motion (eventually indvars should
run after all canonical instcombines). We want ISEL to recombine the
add and the check, at least on x86.
This is currently under an option for reducing live induction
variables: -liv-reduce. The next step is reducing liveness of IVs that
are live out of the overflow check paths. Once the related
optimizations are fully developed, reviewed and tested, I do expect
this to become default.
llvm-svn: 197926
If the Scalarizer scalarized a vector PHI but could not scalarize
all uses of it, it would insert a series of insertelements to reconstruct
the vector PHI value from the scalar ones. The problem was that it would
emit these insertelements immediately after the PHI, even if there were
other PHIs after it.
llvm-svn: 197909
If we happen to eliminate every case in a switch that has branch
weights, we currently try to create metadata for the one remaining
branch, triggering an assert. Instead, we need to check that the
metadata we're trying to create is sensible.
llvm-svn: 197791
A phi node operand or an instruction operand could be a constant expression that
can trap (division). Check that we don't vectorize such cases.
PR16729
radar://15653590
llvm-svn: 197449
through an invoke instruction.
The original patch for this was written by Mark Seaborn, but I've
reworked his test case into the existing returns_twice test case and
implemented the fix by the prior refactoring to actually run the cost
analysis over invoke instructions, and then here fixing our detection of
the returns_twice attribute to work for both calls and invokes. We never
noticed because we never saw an invoke. =[
llvm-svn: 197216
handles terminator instructions.
The inline cost analysis inheritted some pretty rough handling of
terminator insts from the original cost analysis, and then made it much,
much worse by factoring all of the important analyses into a separate
instruction visitor. That instruction visitor never visited the
terminator.
This works fine for things like conditional branches, but for many other
things we simply computed The Wrong Value. First example are
unconditional branches, which should be free but were counted as full
cost. This is most significant for conditional branches where the
condition simplifies and folds during inlining. We paid a 1 instruction
tax on every branch in a straight line specialized path. =[
Oh, we also claimed that the unreachable instruction had cost.
But it gets worse. Let's consider invoke. We never applied the call
penalty. We never accounted for the cost of the arguments. Nope. Worse
still, we didn't handle the *correctness* constraints of not inlining
recursive invokes, or exception throwing returns_twice functions. Oops.
See PR18206. Sadly, PR18206 requires yet another fix, but this
refactoring is at least a huge step in that direction.
llvm-svn: 197215
GlobalOpt's CleanupConstantGlobalUsers function uses a worklist array to manage
constant users to be visited. The pointers in this array need to be weak
handles because when we delete a constant array, we may also be holding a
pointer to one of its elements (or an element of one of its elements if we're
dealing with an array of arrays) in the worklist.
Fixes PR17347.
llvm-svn: 197178
This avoids creating branch weight metadata of length one when we fold
cases into the default of a switch instruction, which was triggering
an assert.
llvm-svn: 196845
Before this change, inlining one "invoke" into an outer "invoke" call
site can lead to the outer landingpad's catch/filter clauses being
copied multiple times into the resulting landingpad. This happens:
* when the inlined function contains multiple "resume" instructions,
because forwardResume() copies the clauses but is called multiple
times;
* when the inlined function contains a "resume" and a "call", because
HandleCallsInBlockInlinedThroughInvoke() copies the clauses but is
redundant with forwardResume().
Fix this by deduplicating the code.
This problem doesn't lead to any incorrect execution; it's only
untidy.
This change will make fixing PR17872 a little easier.
llvm-svn: 196710
The intended behaviour is to force vectorization on the presence
of the flag (either turn on or off), and to continue the behaviour
as expected in its absence. Tests were added to make sure the all
cases are covered in opt. No tests were added in other tools with
the assumption that they should use the PassManagerBuilder in the
same way.
This patch also removes the outdated -late-vectorize flag, which was
on by default and not helping much.
The pragma metadata is being attached to the same place as other loop
metadata, but nothing forbids one from attaching it to a function
(to enable #pragma optimize) or basic blocks (to hint the basic-block
vectorizers), etc. The logic should be the same all around.
Patches to Clang to produce the metadata will be produced after the
initial implementation is agreed upon and committed. Patches to other
vectorizers (such as SLP and BB) will be added once we're happy with
the pass manager changes.
llvm-svn: 196537
We were creating external uses for scalar values in MustGather entries that also
had a ScalarToTreeEntry (they also are present in a vectorized tuple). This
meant we would keep a value 'alive' as a scalar and vectorized causing havoc.
This is not necessary because when we create a MustGather vector we explicitly
create external uses entries for the insertelement instructions of the
MustGather vector elements.
Fixes PR18129.
radar://15582184
llvm-svn: 196508
clang enables vectorization at optimization levels > 1 and size level < 2. opt
should behave similarily.
Loop vectorization and SLP vectorization can be disabled with the flags
-disable-(loop/slp)-vectorization.
llvm-svn: 196294
The profile file parser needed some tests for its parsing actions.
This adds tests for each of the error messages emitted by the parser.
llvm-svn: 196106
In signed arithmetic we could end up with an i64 trip count for an i32 phi.
Because it is signed arithmetic we know that this is only defined if the i32
does not wrap. It is therefore safe to truncate the i64 trip count to a i32
value.
Fixes PR18049.
llvm-svn: 195787
we generate PHI nodes with multiple entries from the same basic block but
with different values. Enabling CSE on ExtractElement instructions make sure
that all of the RAUWed instructions are the same.
llvm-svn: 195773
Hao Liu