The main dotest.py should exit with a system return code of 1 on any
issue. This change fixes a place where I omitted counting the
exceptional exit value to determine if we should return 1 when using the
new summary results.
This change also puts a banner around the Issue Details section that comes
before the Test Result Summary.
llvm-svn: 255138
This is a redo of r255124 (reverted at r255126) with an added check for a
scalar destination type and an added test for the failure seen in Clang's
test/CodeGen/vector.c. The extra test shows a different missing optimization.
Original commit message:
Example:
bitcast (extractelement (bitcast <2 x float> %X to <2 x i32>), 1) to float
--->
extractelement <2 x float> %X, i32 1
This is part of fixing PR25543:
https://llvm.org/bugs/show_bug.cgi?id=25543
The next step will be to generalize this fold:
trunc ( lshr ( bitcast X) ) -> extractelement (X)
Ie, I'm hoping to replace the existing transform of:
bitcast ( trunc ( lshr ( bitcast X)))
added by:
http://reviews.llvm.org/rL112232
with 2 less specific transforms to catch the case in the bug report.
Differential Revision: http://reviews.llvm.org/D14879
llvm-svn: 255137
check_memcpy test added in r254959 fails on some configurations due to
memset() calls inserted by Clang. Try harder to avoid them:
* Explicitly use internal_memset() instead of empty braced-initializer.
* Replace "new T()" with "new T", as the former generates zero-initialization
for structs in C++11.
llvm-svn: 255136
The bug in IndVarSimplify was fixed in r254976, r254977, so I'm
reapplying the original patch for avoiding redundant LCSSA recomputation.
This reverts commit ffe3b434e505e403146aff00be0c177bb6d13466.
llvm-svn: 255133
This new patch fixes a few bugs that exposed in last submit. It also improves
the test cases.
--Original Commit Message--
This patch implements a minimum spanning tree (MST) based instrumentation for
PGO. The use of MST guarantees minimum number of CFG edges getting
instrumented. An addition optimization is to instrument the less executed
edges to further reduce the instrumentation overhead. The patch contains both the
instrumentation and the use of the profile to set the branch weights.
Differential Revision: http://reviews.llvm.org/D12781
llvm-svn: 255132
This change is a trial balloon to verify that the default test summary
output sends the right output for the buildbot issue detection script.
The effect of this change will be reverted after verifying the testbot
behavior. This change will not stay in as is and will knowingly create
noise, see this thread:
http://lists.llvm.org/pipermail/lldb-dev/2015-December/009048.html
llvm-svn: 255131
Summary:
Improve SaturatingAdd()/SaturatingMultiply() to use bool * to optionally return overflow result.
This should make it clearer that the value is returned at callsites and reduces the size of the implementation.
Reviewers: davidxl, silvas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15219
llvm-svn: 255128
Reinteroduce the code for moving ARGUMENTS back to the top of the basic block.
While the ARGUMENTS physical register prevents sinking and scheduling from
moving them, it does not appear to be sufficient to prevent SelectionDAG from
moving them down in the initial schedule. This patch introduces a patch that
moves them back to the top immediately after SelectionDAG runs.
This is still hopefully a temporary solution. http://reviews.llvm.org/D14750 is
one alternative, though the review has not been favorable, and proposed
alternatives are longer-term and have other downsides.
This fixes the main outstanding -verify-machineinstrs failures, so it adds
-verify-machineinstrs to several tests.
Differential Revision: http://reviews.llvm.org/D15377
llvm-svn: 255125
Example:
bitcast (extractelement (bitcast <2 x float> %X to <2 x i32>), 1) to float
--->
extractelement <2 x float> %X, i32 1
This is part of fixing PR25543:
https://llvm.org/bugs/show_bug.cgi?id=25543
The next step will be to generalize this fold:
trunc ( lshr ( bitcast X) ) -> extractelement (X)
Ie, I'm hoping to replace the existing transform of:
bitcast ( trunc ( lshr ( bitcast X)))
added by:
http://reviews.llvm.org/rL112232
with 2 less specific transforms to catch the case in the bug report.
Differential Revision: http://reviews.llvm.org/D14879
llvm-svn: 255124
Summary:
Available_externally global variable with initializer were considered "hasInitializer()",
while obviously it can't match the description:
Whether the global variable has an initializer, and any changes made to the
initializer will turn up in the final executable.
since modifying the initializer of an externally available variable does not make sense.
Reviewers: pcc, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15351
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255123
ScalarEvolution.h, in order to avoid cyclic dependencies between the Transform
and Analysis modules:
[LV][LAA] Add a layer over SCEV to apply run-time checked knowledge on SCEV expressions
Summary:
This change creates a layer over ScalarEvolution for LAA and LV, and centralizes the
usage of SCEV predicates. The SCEVPredicatedLayer takes the statically deduced knowledge
by ScalarEvolution and applies the knowledge from the SCEV predicates. The end goal is
that both LAA and LV should use this interface everywhere.
This also solves a problem involving the result of SCEV expression rewritting when
the predicate changes. Suppose we have the expression (sext {a,+,b}) and two predicates
P1: {a,+,b} has nsw
P2: b = 1.
Applying P1 and then P2 gives us {a,+,1}, while applying P2 and the P1 gives us
sext({a,+,1}) (the AddRec expression was changed by P2 so P1 no longer applies).
The SCEVPredicatedLayer maintains the order of transformations by feeding back
the results of previous transformations into new transformations, and therefore
avoiding this issue.
The SCEVPredicatedLayer maintains a cache to remember the results of previous
SCEV rewritting results. This also has the benefit of reducing the overall number
of expression rewrites.
Reviewers: mzolotukhin, anemet
Subscribers: jmolloy, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D14296
llvm-svn: 255122
New hook for rsdAllocationDestroy() which is called when allocations are deleted.
LLDB should be aware of this so we can remove the allocation from our internal list.
llvm-svn: 255121
We mutated the DAG, which invalidated the node we were trying to use
as a base register. Sometimes we got away with it, but other times the
node really did get deleted before it was finished with.
Should fix PR25733
llvm-svn: 255120
Summary:
This change creates a layer over ScalarEvolution for LAA and LV, and centralizes the
usage of SCEV predicates. The SCEVPredicatedLayer takes the statically deduced knowledge
by ScalarEvolution and applies the knowledge from the SCEV predicates. The end goal is
that both LAA and LV should use this interface everywhere.
This also solves a problem involving the result of SCEV expression rewritting when
the predicate changes. Suppose we have the expression (sext {a,+,b}) and two predicates
P1: {a,+,b} has nsw
P2: b = 1.
Applying P1 and then P2 gives us {a,+,1}, while applying P2 and the P1 gives us
sext({a,+,1}) (the AddRec expression was changed by P2 so P1 no longer applies).
The SCEVPredicatedLayer maintains the order of transformations by feeding back
the results of previous transformations into new transformations, and therefore
avoiding this issue.
The SCEVPredicatedLayer maintains a cache to remember the results of previous
SCEV rewritting results. This also has the benefit of reducing the overall number
of expression rewrites.
Reviewers: mzolotukhin, anemet
Subscribers: jmolloy, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D14296
llvm-svn: 255115
During selection DAG legalization, extractelement is replaced with a load
instruction. To do this, a temporary store to the stack is used unless an
existing store is found that can be re-used.
If re-using a store, the chain going out of the store must be replaced by
the one going out of the new load (this ensures that any stores that must
take place after the store happens after the load, else the value might
be overwritten before it is loaded).
The problem is, if the extractelement index is dependent on the store
replacing the chain will introduce a cycle in the selection DAG (the load
uses the index, and by replacing the chain we will make the index dependent
on the load).
To fix this, if the index is dependent on the store, the store is skipped.
This is conservative as we may end up creating an unnecessary extra store
to the stack. However, the situation is not expected to occur very often.
Differential Revision: http://reviews.llvm.org/D15330
llvm-svn: 255114
The bots are now running the torture tests properly. Bin all failures from the GCC C torture tests so that we can tackle failures and make the tree go red on regressions.
llvm-svn: 255111
Summary:
Although the multiclass for i32 selects might seem redundant as it has
only one instantiation, we will use it to replace the correspondent
patterns in Mips64r6InstrInfo.td in follow-up commits.
Reviewers: dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14612
llvm-svn: 255110
Commited patch was intended to implement LH, LHE, LHU and LHUE instructions.
After commit test-suite failed with error message in the form of:
fatal error: error in backend: Cannot select: t124: i32,ch = load<LD2[%d](tbaa=<0x94acc48>), sext from i16> t0, t2, undef:i32
For that reason I decided to revert commit r254897 and make new patch which besides implementation and standard regression tests will also have dedicated tests (CodeGen) for the above error.
llvm-svn: 255109
This patch will fix the test case test_p_returns_correct_data_size_for_each_qRegisterInfo_attach_llgs_* of TestLldbGdbServer.py on mips. The test fails because we were sending RegisterInfo for msa registers to client even when msa registers are not available. With this commit server will send E45(end of resigters) response if msa registers are not available.
llvm-svn: 255108
When introducing separate control flow for the original and optimized code we
introduce now a special 'ExitingBlock':
\ /
EnteringBB
|
SplitBlock---------\
_____|_____ |
/ EntryBB \ StartBlock
| (region) | |
\_ExitingBB_/ ExitingBlock
| |
MergeBlock---------/
|
ExitBB
/ \
This 'ExitingBlock' contains code such as the final_reloads for scalars, which
previously were just added to whichever statement/loop_exit/branch-merge block
had been generated last. Having an explicit basic block makes it easier to
find these constructs when looking at the CFG.
llvm-svn: 255107
Implement the TLS relocation optimization for 32-bit x86 that is described in
"ELF Handling For Thread-Local Storage" by Ulrich Drepper, chapter 5,
"IA-32 Linker Optimizations". Specifically, this patch implements these
optimizations: LD->LE, GD->IE, GD->LD, and IE->LE.
Differential revision: http://reviews.llvm.org/D15292
llvm-svn: 255103
loading the source Module, linking the function in the destination
module, and destroying the source Module before repeating with the
next function to import (potentially from the same Module).
Ideally we would keep the source Module alive and import the next
Function needed from this Module. Unfortunately this is not possible
because the linker does not leave it in a usable state.
However we can do better by first computing the list of all candidates
per Module, and only then load the source Module and import all the
function we need for it.
The trick to process callees is to materialize function in the source
module when building the list of function to import, and inspect them
in their source module, collecting the list of callees for each
callee.
When we move the the actual import, we will import from each source
module exactly once. Each source module is loaded exactly once.
The only drawback it that it requires to have all the lazy-loaded
source Module in memory at the same time.
Currently this patch already improves considerably the link time,
a multithreaded link of llvm-dis on my laptop was:
real 1m12.175s user 6m32.430s sys 0m10.529s
and is now:
real 0m40.697s user 2m10.237s sys 0m4.375s
Note: this is the full link time (linker+Import+Optimizer+CodeGen)
Differential Revision: http://reviews.llvm.org/D15178
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255100
The results formatter system is now fed timeouts and exceptional process
exits (i.e. inferior dotest.py process that exited by signal on POSIX
systems).
If a timeout or exceptional exit happens while a test method is running
on the worker queue, the timeout or exceptional exit is charged and
reported against that test method. Otherwise, if no test method was
running at the time of the timeout or exceptional exit, only the test
filename will be reported as the TIMEOUT or ERROR.
Implements:
https://llvm.org/bugs/show_bug.cgi?id=24830https://llvm.org/bugs/show_bug.cgi?id=25703
In support of:
https://llvm.org/bugs/show_bug.cgi?id=25450
llvm-svn: 255097
Teresa Johnson