The SystemZ linkers provide an optimization to transform a general-
or local-dynamic TLS sequence into an initial-exec sequence if possible.
Do do that, the compiler generates a function call to __tls_get_offset,
which is a brasl instruction annotated with *two* relocations:
- a R_390_PLT32DBL to install __tls_get_offset as branch target
- a R_390_TLS_GDCALL / R_390_TLS_LDCALL to inform the linker that
the TLS optimization should be performed if possible
If the optimization is performed, the brasl is replaced by an ld load
instruction.
However, *both* relocs are processed independently by the linker.
Therefore it is crucial that the R_390_PLT32DBL is processed *first*
(installing the branch target for the brasl) and the R_390_TLS_GDCALL
is processed *second* (replacing the whole brasl with an ld).
If the relocs are swapped, the linker will first replace the brasl
with an ld, and *then* install the __tls_get_offset branch target
offset. Since ld has a different layout than brasl, this may even
result in a completely different (or invalid) instruction; in any
case, the resulting code is corrupted.
Unfortunately, the way the MC common code sorts relocations causes
these two to *always* end up the wrong way around, resulting in
wrong code generation by the linker and crashes.
This patch overrides the sortRelocs routine to detect this particular
pair of relocs and enforce the required order.
llvm-svn: 255787
ARMv8.2-A adds 16-bit floating point versions of all existing SIMD
floating-point instructions. This is an optional extension, so all of
these instructions require the FeatureFullFP16 subtarget feature.
Note that VFP without SIMD is not a valid combination for any version of
ARMv8-A, but I have ensured that these instructions all depend on both
FeatureNEON and FeatureFullFP16 for consistency.
Differential Revision: http://reviews.llvm.org/D15039
llvm-svn: 255764
ARMv8.2-A adds 16-bit floating point versions of all existing VFP
floating-point instructions. This is an optional extension, so all of
these instructions require the FeatureFullFP16 subtarget feature.
The assembly for these instructions uses S registers (AArch32 does not
have H registers), but the instructions have ".f16" type specifiers
rather than ".f32" or ".f64". The top 16 bits of each source register
are ignored, and the top 16 bits of the destination register are set to
zero.
These instructions are mostly the same as the 32- and 64-bit versions,
but they use coprocessor 9 rather than 10 and 11.
Two new instructions, VMOVX and VINS, have been added to allow packing
and extracting two 16-bit floats stored in the top and bottom halves of
an S register.
New fixup kinds have been added for the PC-relative load and store
instructions, but no ELF relocations have been added as they have a
range of 512 bytes.
Differential Revision: http://reviews.llvm.org/D15038
llvm-svn: 255762
Prior to this patch, we would wrongly stick to the variant with imm8 encoding
even when the relocation could not fit that size.
rdar://problem/23785506
llvm-svn: 255583
Prior to this patch, we would wrongly stick to the variant with imm8 encoding
even when the relocation could not fit that size.
rdar://problem/23785506
llvm-svn: 255570
The .even directive aligns content to an evan-numbered address.
In at&t syntax .even
In Microsoft syntax even (without the dot).
Differential Revision: http://reviews.llvm.org/D15413
llvm-svn: 255462
Commited patch was intended to implement LH, LHE, LHU and LHUE instructions.
After commit test-suite failed with error message in the form of:
fatal error: error in backend: Cannot select: t124: i32,ch = load<LD2[%d](tbaa=<0x94acc48>), sext from i16> t0, t2, undef:i32
For that reason I decided to revert commit r254897 and make new patch which besides implementation and standard regression tests will also have dedicated tests (CodeGen) for the above error.
llvm-svn: 255109
AND/BIC instructions do accept SP/PC, so the register class should be
more generic (rGPR -> GPR) to cope with that case. Adding more tests.
llvm-svn: 255034
Summary:
We don't check the size operand on ext/dext*/ins/dins* yet because the
permitted range depends on the pos argument and we can't check that using
this mechanism.
The bug was that dextu/dinsu accepted 0..31 in the pos operand instead of 32..63.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D15190
llvm-svn: 255015
ARMv8.2-A adds 16-bit floating point versions of all existing SIMD
floating-point instructions. This is an optional extension, so all of
these instructions require the FeatureFullFP16 subtarget feature.
Note that VFP without SIMD is not a valid combination for any version of
ARMv8-A, but I have ensured that these instructions all depend on both
FeatureNEON and FeatureFullFP16 for consistency.
The ".2h" vector type specifier is now legal (for the scalar pairwise
reduction instructions), so some unrelated tests have been modified as
different error messages are emitted. This is not a problem as the
invalid operands are still caught.
llvm-svn: 255010
Summary: This reverts r254234, and adds a simple fix for the annoying case of use-after-free.
Reviewers: rengolin
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D15236
llvm-svn: 254912
Summary:
valid-xfail.s is for instructions that should be valid in the given ISA but
incorrectly fail. DSP/DSPr2 instructions are correct to fail since DSP/DSPr2 is
not enabled.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15072
llvm-svn: 254911
According to x86 spec, loopz and loopnz should be supported for Intel syntax, where loopz is equivalent to loope and loopnz is equivalent to loopne.
Differential Revision: http://reviews.llvm.org/D15148
llvm-svn: 254877
This was fixed in r254751, but untestable until r254774, which
added the necessary command line flag to llc. Add a test now
to make sure this doesn't regress again.
llvm-svn: 254814
Summary: Lately, I have submitted a number of patches to fix bugs that
only occurred when using the same pass manager to compile multiple
modules (generally these bugs are failure to reset some persistent
state). Unfortunately I don't think there is currently a way to test
that from the command line. This adds a very simple flag to both llc
and opt, under which the tools will simply re-run their respective
pass pipelines using the same pass manager on (a clone of the same
module). Additionally, we verify that both outputs are bitwise the
same.
Reviewers: yaron.keren
Subscribers: loladiro, yaron.keren, kcc, llvm-commits
Differential Revision: http://reviews.llvm.org/D14965
llvm-svn: 254774
Currently "<type> ptr <reg name>" treated as <reg name> in MS inline asm, ignoring the "<type> ptr" completely and possibly ignoring the intention of the user.
Fixed llvm to produce an error when encountering "<type> ptr <reg name>" operands.
For example: andpd xmm1,xmmword ptr xmm1 --> andpd xmm1, xmm1
though andpd has 2 possible matching formats - andpd xmm, xmm/m128
Patch by: ziv.izhar@intel.com
Differential Revision: http://reviews.llvm.org/D14607
llvm-svn: 254607
The Statistical Profiling Extension is an optional extension to
ARMv8.2-A. Since it is an optional extension, I have added the
FeatureSPE subtarget feature to control it. The assembler-visible parts
of this extension are the new "psb csync" instruction, which is
equivalent to "hint #17", and a number of system registers.
Differential Revision: http://reviews.llvm.org/D15021
llvm-svn: 254401
Add ARMv8.2-A to TargetParser, so that it can be used by the clang
command-line options and the .arch directive.
Most testing of this will be done in clang, checking that the
command-line options that this enables work.
Differential Revision: http://reviews.llvm.org/D15037
llvm-svn: 254400
Value of offset operand for microMIPS BALC and BC instructions is currently shifted 2 bits, but it should be 1 bit.
Differential Revision: http://reviews.llvm.org/D14770
llvm-svn: 254296
valid-xfail.s is for instructions that should be valid in the given ISA but
incorrectly fail. MSA instructions are correct to fail since MSA is not enabled.
llvm-svn: 254293
Summary:
Since this build attribute corresponds to a whole module, and
different functions in a module may differ in the optimizations
enabled for them, this attribute is emitted after all functions,
and only in the case that the optimization goals for all
functions match.
Reviewers: logan, hans
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D14934
llvm-svn: 254201
ARMv8.2-A adds 16-bit floating point versions of all existing VFP
floating-point instructions. This is an optional extension, so all of
these instructions require the FeatureFullFP16 subtarget feature.
Most of these instructions are the same as the 32- and 64-bit versions,
but with the type field (bits 23-22) set to 0b11. Previously the top bit
of the size field was always 0, so the instruction classes only provided
a 1-bit size field, which I have widened to 2 bits.
Differential Revision: http://reviews.llvm.org/D15014
llvm-svn: 254198
The COFF object writer was previously adding unnecessary symbols to its
temporary data structures and cleaning them up later. This made the code
harder to understand and caused a bug (aliases classed as temporary symbols
would cause an assertion failure). A much simpler way of handling such
symbols is to ask the layout for their section-relative position when needed.
Tested with a bootstrap on Windows and by building Chrome.
Differential Revision: http://reviews.llvm.org/D14975
llvm-svn: 254183
Summary:
The bugs were:
* append, prepend, and balign were not tested
* balign takes a uimm2 not a uimm5.
* drotr32 was correctly implemented with a uimm5 but the tests expected
'52' to be valid.
* li/la were implemented with a uimm5 instead of simm32. simm32 isn't
completely correct either but I'll fix that when I get to simm32.
A notable omission are some of the shift instructions. Several of these
have been implemented using a single uimm6 instruction (rather than two
uimm5 instructions and a CodeGen-only uimm6 pseudo). These will be updated
in the uimm6 patch.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14712
llvm-svn: 254164
ARMv8.2-A adds new variants of the "at" (address translate) system
instruction, which take the PSTATE.PAN bit (added in ARMv8.1-A). These
are a required part of ARMv8.2-A, so no additional subtarget features
are required.
Differential Revision: http://reviews.llvm.org/D15018
llvm-svn: 254159
ARMv8.2-A adds a new PSTATE bit, PSTATE.UAO, which allows the LDTR/STTR
instructions to behave the same as LDR/STR with respect to execute-only
pages at higher privilege levels. New variants of the MSR/MRS
instructions are added to allow reading and writing this bit. It is a
required part of ARMv8.2-A, so no additional subtarget features are
required.
Differential Revision: http://reviews.llvm.org/D15020
llvm-svn: 254157
ARMv8.2-A adds the "dc cvap" instruction, which is a system instruction
that cleans caches to the point of persistence (for systems that have
persistent memory). It is a required part of ARMv8.2-A, so no additional
subtarget features are required.
Differential Revision: http://reviews.llvm.org/D15016
llvm-svn: 254156
ARMv8.2-A adds a new ID register, ID_A64MMFR2_EL1, which behaves in the
same way as ID_A64MMFR0_EL1 and ID_A64MMFR1_EL1. It is a required part
of ARMv8.2-A, so no additional subtarget features are required.
Differential Revision: http://reviews.llvm.org/D15017
llvm-svn: 254155
Summary:
This follows D14577 to treat ARMv6-J as an alias for ARMv6,
instead of an architecture in its own right.
The functional change is that the default CPU when targeting ARMv6-J
changes from arm1136j-s to arm1136jf-s, which is currently used as
the default CPU for ARMv6; both are, in fact, ARMv6-J CPUs.
The J-bit (Jazelle support) is irrelevant to LLVM, and it doesn't
affect code generation, attributes, optimizations, or anything else,
apart from selecting the default CPU.
Reviewers: rengolin, logan, compnerd
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14755
llvm-svn: 253675
Make X86AsmBackend generate smarter nops instead of a bunch of 0x90 for code alignment for CPUs which don't support long nop instructions.
Differential Revision: http://reviews.llvm.org/D14178
llvm-svn: 253557
Starting on an input stream that is not at offset 0 would trigger the
assert in WinCOFFObjectWriter.cpp:1065:
assert(getStream().tell() <= (*i)->Header.PointerToRawData &&
"Section::PointerToRawData is insane!");
llvm-svn: 253464
Currently, if the assembler encounters an error after parsing (such as an
out-of-range fixup), it reports this as a fatal error, and so stops after the
first error. However, for most of these there is an obvious way to recover
after emitting the error, such as emitting the fixup with a value of zero. This
means that we can report on all of the errors in a file, not just the first
one. MCContext::reportError records the fact that an error was encountered, so
we won't actually emit an object file with the incorrect contents.
Differential Revision: http://reviews.llvm.org/D14717
llvm-svn: 253328
This adds reportError to MCContext, which can be used as an alternative to
reportFatalError when the assembler wants to try to continue processing the
rest of the file after the error is reported, so that all of the errors ina
file can be reported. It records the fact that an error was encountered, so we
can avoid emitting an object file if any errors occurred.
This patch doesn't add any uses of this function (a later patch will convert
most uses of reportFatalError to use it), but there is a small functional
change: we use the SourceManager to print the error message, even if we have a
null SMLoc. This means that we get a SourceManager-style message, with the file
and line information shown as <unknown>, rather than the "LLVM ERROR" style
used by report_fatal_error.
llvm-svn: 253327
Storing the source location of the expression that created a constant pool
entry allows us to emit better error messages if we later discover that the
expression cannot be represented by a relocation.
Differential Revision: http://reviews.llvm.org/D14646
llvm-svn: 253220
The MCValue class can store a SMLoc to allow better error messages to be
emitted if an error is detected after parsing. The ARM and AArch64 assembly
parsers were not setting this, so error messages did not have source
information.
Differential Revision: http://reviews.llvm.org/D14645
llvm-svn: 253219
Summary:
* ARMv6KZ is the "canonical" name, given in the ARMARM
* ARMv6Z is an "official abbreviation" for it, mentioned in the ARMARM
* ARMv6ZK is a popular misspelling, which we should support as an alias.
The patch corrects the handling of the names.
Functional changes:
* ARMv6Z no longer treated as an architecture in its own right
* ARMv6ZK renamed to ARMv6KZ, accepting ARMv6ZK as an alias
* arm1176jz-s and arm1176jzf-s recognized as ARMv6ZK, instead of ARMv6K
* default ARMv6K CPU changed to arm1176j-s
Reviewers: rengolin, logan, compnerd
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14568
llvm-svn: 253206
The AArch64 assembler was silently ignoring instructions like this:
ldr foo, =bar
AArch64AsmParser::parseOperand was returning true as the parse failed, but was
not calling AArch64AsmParser::Error to report this to the user, so the
instruction was ignored without printing an error message.
Differential Revision: http://reviews.llvm.org/D14651
llvm-svn: 253193
LLVM Missing the following instructions: fadd\fdiv\fmul\fsub\fsubr\fdivr.
GAS and MS supporting this instruction and lowering them in to a faddp\fdivp\fmulp\fsubp\fsubrp\fdivrp instructions.
Differential Revision: http://reviews.llvm.org/D14217
llvm-svn: 252908
Summary:
Support for R_MIPS_NONE allows us to parse MIPS16's usage of .reloc.
R_MIPS_32 was included to be able to better test the directive.
Targets can add their relocations by overriding MCAsmBackend::getFixupKind().
Subscribers: grosbach, rafael, majnemer, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13659
llvm-svn: 252888
Summary:
Only DSPr2 is present because it appears we've never added DSPr1 tests.
We'll have to correct that in a later patch.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14448
llvm-svn: 252752
Summary:
The bug was that the sldi instructions have immediate widths dependant on
their element size. So sldi.d has a 1-bit immediate and sldi.b has a 4-bit
immediate. All of these were using 4-bit immediates previously.
Reviewers: vkalintiris
Subscribers: llvm-commits, atanasyan, dsanders
Differential Revision: http://reviews.llvm.org/D14018
llvm-svn: 252297
Summary:
The bug was that the MIPS32R6/MIPS64R6/microMIPS32R6 versions of LSA and DLSA
(unlike the MSA version) failed to account for the off-by-one encoding of the
immediate. The range is actually 1..4 rather than 0..3.
Reviewers: vkalintiris
Subscribers: atanasyan, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D14015
llvm-svn: 252295
Previously, subprograms contained a metadata reference to the function they
described. Because most clients need to get or set a subprogram for a given
function rather than the other way around, this created unneeded inefficiency.
For example, many passes needed to call the function llvm::makeSubprogramMap()
to build a mapping from functions to subprograms, and the IR linker needed to
fix up function references in a way that caused quadratic complexity in the IR
linking phase of LTO.
This change reverses the direction of the edge by storing the subprogram as
function-level metadata and removing DISubprogram's function field.
Since this is an IR change, a bitcode upgrade has been provided.
Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is
attached to the PR.
Differential Revision: http://reviews.llvm.org/D14265
llvm-svn: 252219
The generic infrastructure already did a lot of work to decide if the
fixup value is know or not. It doesn't make sense to reimplement a very
basic case: same fragment.
llvm-svn: 252090
If the requested SGPR was not actually aligned, it was
accepted and rounded down instead of rejected.
Also fix an assert if the range is an invalid size.
llvm-svn: 252009
Summary:
ARMv6KZ cores were set up incorrectly in ARM.td; also, the SMI mnemonic
(the old name for SMC, as defined in ARMv6KZ) wasn't supported.
Reviewers: jmolloy, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D14154
llvm-svn: 251627
These MachO file directives are used by linkers and other tools to provide
compatibility information, much like the existing .ios_version_min and
.macosx_version_min.
llvm-svn: 251569
Summary:
This patch handles assembly and disassembly, but not codegen, as of yet.
Additionally, it fixes a bug whereby SP and PC as shifted-reg operands
were treated as predictable in ARMv7 Thumb; and it enables the tests
for invalid and unpredictable instructions to run on both ARMv7 and ARMv8.
Reviewers: jmolloy, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D14141
llvm-svn: 251516
cntlz is the old POWER mnemonic. cntlzw is the PowerPC mnemonic.
This change fixes an issue when -no-integrated-as: The opcode cntlz is
unrecognized by gas
Alias the POWER mnemonic cntlz[.] to the PowerPC mnemonic cntlzw[.]
This is done for because the POWER cntlz mnemonic has be used by LLVM for
a very long time. We need to make sure that assembly programs
that are using the cntlz[.] do not break with this change.
Change PowerPC tests to reflect the insn change from cntlz to cntlzw.
Add assembly test to verify cntlz[.] is encoded correctly.
Patch by Tom Rix!
llvm-svn: 251489
convert float to half with mask/maskz for the reg to reg version and mask for the reg to mem version (there is no maskz version for reg to mem).
Differential Revision: http://reviews.llvm.org/D14113
llvm-svn: 251409
GNU as and Darwin give the various binary operators different
precedence. LLVM's MC supported the Darwin semantics but not the GNU
semantics.
This fixes PR25311.
llvm-svn: 251271
We didn't validate that the .word directive was given a sane value,
leading to crashes when we attempt to write out the object file.
Instead, perform some validation and issue a diagnostic pointing at the
start of the diagnostic.
llvm-svn: 251270
PR24686 identifies a problem where a relocation expression is invalid
when not all of the symbols in the expression can be locally
resolved. This causes the compiler to request a PC-relative half16ds
relocation, which is nonsensical for PowerPC. This patch recognizes
this situation and ensures we fail the assembly cleanly.
Test case provided by Anton Blanchard.
llvm-svn: 251027
Summary:
The forwards compatibility strategy employed by MIPS is to consider registers
to be infinitely sign-extended. Then on ISA's with a wider register, the result
of existing instructions are sign-extended to register width and zero-extended
counterparts are added. copy_u.w on MSA32 and copy_u.w on MSA64 violate this
strategy and we have therefore corrected the MSA specs to fix this.
We still keep track of sign/zero-extension during legalization but we now
match copy_s.[wd] where required.
No change required to clang since __builtin_msa_copy_u_[wd] will map to
copy_s.[wd] where appropriate for the target.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13472
llvm-svn: 250887
Crashing is bad, m'kay? Fixing a 4 year old bug of my own creation.
Adding the testcase now which I should have added then which would have
long since caught this.
The problem is that printMessage() will display the diagnostic but not
set HadError to true, resulting in the assembler continuing on its way
and trying to create relocations for things that may not allow them or
otherwise get itself into trouble. Using the Error() helper function
here rather than calling printMessage() directly resolves this.
rdar://23133240
llvm-svn: 250557
Summary:
This macro is needed to prevent test/CodeGen/Mips/2008-08-01-AsmInline.ll from
failing after the integrated assembler is enabled by default.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13654
llvm-svn: 250414
Reid Kleckner