Recommiting after fixing X86 inc/dec chain bug.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293893
Summary:
This way, the type legalization machinery will take care of registering
the result of this node properly.
This patches fixes all failing fp16 test cases with expensive checks.
(CodeGen/ARM/fp16-promote.ll, CodeGen/ARM/fp16.ll, CodeGen/X86/cvt16.ll
CodeGen/X86/soft-fp.ll)
Reviewers: t.p.northover, baldrick, olista01, bogner, jmolloy, davidxl, ab, echristo, hfinkel
Reviewed By: hfinkel
Subscribers: mehdi_amini, hfinkel, davide, RKSimon, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D28195
llvm-svn: 293765
Summary:
The affected transforms all implicitly use associativity of addition,
for which we usually require unsafe math to be enabled.
The "Aggressive" flag is only meant to convey information about the
performance of the fused ops relative to a fmul+fadd sequence.
Fixes Bug 31626.
Reviewers: spatel, hfinkel, mehdi_amini, arsenm, tstellarAMD
Subscribers: jholewinski, nemanjai, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D28675
llvm-svn: 293635
Previously, we would hit UB (or the ISD::DELETED_NODE assert) if we
happened to replace a node during UpdateChains, because it would be
left in the list we were iterating over. This nulls out the pointer
when that happens so that we can avoid the issue.
Fixes llvm.org/PR31710
llvm-svn: 293522
The type system already requires that the number of vector elements must fit in 32-bits so an index should as well. Even if the type of the index were larger all we care about is that the constant index can fit in 64-bits so that we can call getZExtValue.
llvm-svn: 293413
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
In case of a SIGN/ZERO_EXTEND of an incomplete vector type (using only a
partial number of available vector elements), WidenVecRes_Convert() used to
resort to scalarization.
This patch adds a handling of the (common) case where an input vector can be
found of same width as the widened result vector, by converting the node to
SIGN/ZERO_EXTEND_VECTOR_INREG.
Review: Eli Friedman
llvm-svn: 293268
This commit introduces a set of experimental intrinsics intended to prevent
optimizations that make assumptions about the rounding mode and floating point
exception behavior. These intrinsics will later be extended to specify
flush-to-zero behavior. More work is also required to model instruction
dependencies in machine code and to generate these instructions from clang
(when required by pragmas and/or command line options that are not currently
supported).
Differential Revision: https://reviews.llvm.org/D27028
llvm-svn: 293226
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293184
Later code expects the vector loads produced to be directly
concatenable, which means we shouldn't pad anything except the last load
produced with UNDEF.
llvm-svn: 293088
The previous patch (https://reviews.llvm.org/rL289538) got reverted because of a bug. Chandler also requested some changes to the algorithm.
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20161212/413479.html
This is an updated patch. The key difference is that collectBitProviders (renamed to calculateByteProvider) now collects the origin of one byte, not the whole value. It simplifies the implementation and allows to stop the traversal earlier if we know that the result won't be used.
From the original commit:
Match a pattern where a wide type scalar value is loaded by several narrow loads and combined by shifts and ors. Fold it into a single load or a load and a bswap if the targets supports it.
Assuming little endian target:
i8 *a = ...
i32 val = a[0] | (a[1] << 8) | (a[2] << 16) | (a[3] << 24)
=>
i32 val = *((i32)a)
i8 *a = ...
i32 val = (a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]
=>
i32 val = BSWAP(*((i32)a))
This optimization was discussed on llvm-dev some time ago in "Load combine pass" thread. We came to the conclusion that we want to do this transformation late in the pipeline because in presence of atomic loads load widening is irreversible transformation and it might hinder other optimizations.
Eventually we'd like to support folding patterns like this where the offset has a variable and a constant part:
i32 val = a[i] | (a[i + 1] << 8) | (a[i + 2] << 16) | (a[i + 3] << 24)
Matching the pattern above is easier at SelectionDAG level since address reassociation has already happened and the fact that the loads are adjacent is clear. Understanding that these loads are adjacent at IR level would have involved looking through geps/zexts/adds while looking at the addresses.
The general scheme is to match OR expressions by recursively calculating the origin of individual bytes which constitute the resulting OR value. If all the OR bytes come from memory verify that they are adjacent and match with little or big endian encoding of a wider value. If so and the load of the wider type (and bswap if needed) is allowed by the target generate a load and a bswap if needed.
Reviewed By: RKSimon, filcab, chandlerc
Differential Revision: https://reviews.llvm.org/D27861
llvm-svn: 293036
clang already emits this with -cl-no-signed-zeros, but codegen
doesn't do anything with it. Treat it like the other fast math
attributes, and change one place to use it.
llvm-svn: 293024
Summary:
When conditional branches with complex conditions are split into
multiple branches in SelectionDAGBuilder::FindMergedConditions, also
handle inverted conditions. These may sometimes appear without having
been optimized by InstCombine when CodeGenPrepare decides to sink and
duplicate cmp instructions, causing them to have only one use. This
problem can be increased by e.g. GVNHoist hiding more cmps from
InstCombine by combining equivalent cmps from different blocks.
For example codegen X & !(Y | Z) as:
jmp_if_X TmpBB
jmp FBB
TmpBB:
jmp_if_notY Tmp2BB
jmp FBB
Tmp2BB:
jmp_if_notZ TBB
jmp FBB
Reviewers: bogner, MatzeB, qcolombet
Subscribers: llvm-commits, hiraditya, mcrosier, sebpop
Differential Revision: https://reviews.llvm.org/D28380
llvm-svn: 292944
Summary:
This teaches getNode to simplify extracting from Undef. This is similar to what is done for EXTRACT_VECTOR_ELT. It also adds support for extracting from CONCAT_VECTOR when we can reuse one of the inputs to the concat. These seem like simple non-target specific optimizations.
For X86 we currently handle undef in extractSubvector, but not all EXTRACT_SUBVECTOR creations go through there.
Ultimately, my motivation here is to simplify extractSubvector and remove custom lowering for EXTRACT_SUBVECTOR since we don't do anything but handle undef and BUILD_VECTOR optimizations, but those should be DAG combines.
Reviewers: RKSimon, delena
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29000
llvm-svn: 292876
Summary:
The LibFunc::Func enum holds enumerators named for libc functions.
Unfortunately, there are real situations, including libc implementations, where
function names are actually macros (musl uses "#define fopen64 fopen", for
example; any other transitively visible macro would have similar effects).
Strictly speaking, a conforming C++ Standard Library should provide any such
macros as functions instead (via <cstdio>). However, there are some "library"
functions which are not part of the standard, and thus not subject to this
rule (fopen64, for example). So, in order to be both portable and consistent,
the enum should not use the bare function names.
The old enum naming used a namespace LibFunc and an enum Func, with bare
enumerators. This patch changes LibFunc to be an enum with enumerators prefixed
with "LibFFunc_". (Unfortunately, a scoped enum is not sufficient to override
macros.)
There are additional changes required in clang.
Reviewers: rsmith
Subscribers: mehdi_amini, mzolotukhin, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28476
llvm-svn: 292848
This patch improves the knownbits logic for unsigned integer min/max opcodes.
For UMIN we know that the result will have the maximum of the inputs' known leading zero bits in the result, similarly for UMAX the maximum of the inputs' leading one bits.
This is particularly useful for simplifying clamping patterns,. e.g. as SSE doesn't have a uitofp instruction we want to use sitofp instead where possible and for that we need to confirm that the top bit is not set.
Differential Revision: https://reviews.llvm.org/D28853
llvm-svn: 292528
Summary:
The SDNodeOrder is saved in the IROrder field in the SDNode, and this
field may affects scheduling. Thus, letting dbg.value/declare increase
the order numbers may in turn affect scheduling.
Because of this change we also need to update the code deciding when
dbg values should be output, in ScheduleDAGSDNodes.cpp/ProcessSDDbgValues.
Dbg values now have the same order as the SDNode they are connected to,
not the following orders.
Test cases provided by Florian Hahn.
Reviewers: bogner, aprantl, sunfish, atrick
Reviewed By: atrick
Subscribers: fhahn, probinson, andreadb, llvm-commits, MatzeB
Differential Revision: https://reviews.llvm.org/D25318
llvm-svn: 292485
SelectionDAGBuilder recognizes libfuncs using some homegrown
parameter type-checking.
Use TLI instead, removing another heap of redundant code.
This isn't strictly NFC, as the SDAG code was too lax.
Concretely, this means changes are required to two tests:
- calling a non-variadic function via a variadic prototype isn't OK;
it just happens to work on x86_64 (but not on, e.g., aarch64).
- mempcpy has a size_t parameter; the SDAG code accepts any integer
type, which meant using i32 on x86_64 worked.
I don't think it's worth supporting either of these (IMO) broken
testcases. Instead, fix them to be more correct.
llvm-svn: 292189
Rename from addOperand to just add, to match the other method that has been
added to MachineInstrBuilder for adding more than just 1 operand.
See https://reviews.llvm.org/D28057 for the whole discussion.
Differential Revision: https://reviews.llvm.org/D28556
llvm-svn: 291891
Even with aggressive fusion enabled, this requires duplicating
the fmul, or increases an fadd to another fma which is not an
improvement.
llvm-svn: 291642
If a vector index is out of bounds, the result is supposed to be
undefined but is not undefined behavior. Change the legalization
for indexing the vector on the stack so that an out of bounds
index does not create an out of bounds memory access.
llvm-svn: 291604
The usage of some MIPS MSA instrinsics that took immediates could crash LLVM
during lowering. This patch addresses that behaviour. Crucially this patch
also makes the use of intrinsics with out of range immediates as producing an
internal error.
The ld,st instrinsics would trigger an assertion failure for MIPS64 as their
lowering would attempt to add an i32 offset to a i64 pointer.
Reviewers: vkalintiris, slthakur
Differential Revision: https://reviews.llvm.org/D25438
llvm-svn: 291571
Nirav Dave