The code was incorrectly counting the number of identical instructions,
and therefore tried to predicate an instruction which should not have
been predicated. This could have various effects: a compiler crash,
an assembler failure, a miscompile, or just generating an extra,
unnecessary instruction.
Instead of depending on TargetInstrInfo::removeBranch, which only
works on analyzable branches, just remove all branch instructions.
Fixes https://bugs.llvm.org/show_bug.cgi?id=43121 and
https://bugs.llvm.org/show_bug.cgi?id=41121 .
Differential Revision: https://reviews.llvm.org/D67203
llvm-svn: 371111
As noted in PR43197, we can use test+add+cmov+sra to implement
signed division by a power of 2.
This is based off the similar version in AArch64, but I've
adjusted it to use target independent nodes where AArch64 uses
target specific CMP and CSEL nodes. I've also blocked INT_MIN
as the transform isn't valid for that.
I've limited this to i32 and i64 on 64-bit targets for now and only
when CMOV is supported. i8 and i16 need further investigation to be
sure they get promoted to i32 well.
I adjusted a few tests to enable cmov to demonstrate the new
codegen. I also changed twoaddr-coalesce-3.ll to 32-bit mode
without cmov to avoid perturbing the scenario that is being
set up there.
Differential Revision: https://reviews.llvm.org/D67087
llvm-svn: 371104
A follow-up for r329011.
This may be changed to produce @llvm.sub.with.overflow in a later patch,
but for now just make things more consistent overall.
A few observations stem from this:
* There does not seem to be a similar one-instruction fold for uadd-overflow
* I'm not sure we'll want to canonicalize `B u> A` as `usub.with.overflow`,
so since the `icmp` here no longer refers to `sub`,
reconstructing `usub.with.overflow` will be problematic,
and will likely require standalone pass (similar to DivRemPairs).
https://rise4fun.com/Alive/Zqs
Name: (A - B) u> A --> B u> A
%t0 = sub i8 %A, %B
%r = icmp ugt i8 %t0, %A
=>
%r = icmp ugt i8 %B, %A
Name: (A - B) u<= A --> B u<= A
%t0 = sub i8 %A, %B
%r = icmp ule i8 %t0, %A
=>
%r = icmp ule i8 %B, %A
Name: C u< (C - D) --> C u< D
%t0 = sub i8 %C, %D
%r = icmp ult i8 %C, %t0
=>
%r = icmp ult i8 %C, %D
Name: C u>= (C - D) --> C u>= D
%t0 = sub i8 %C, %D
%r = icmp uge i8 %C, %t0
=>
%r = icmp uge i8 %C, %D
llvm-svn: 371101
Summary:
This is a simple change that allows easy iterator semantics for symbols held in interface file.
Not being used, so harmless change right now, but will be once TBD-v4 is submitted.
Reviewers: ributzka, steven_wu
Reviewed By: ributzka
Subscribers: javed.absar, kristof.beyls, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67204
llvm-svn: 371097
Updates the links on the homepage by moving the User Guides, Programming Documentation, and Subsystem Documentation sections to separate pages. Also changes "Overview" to "About" at the top of the LLVM Docs homepage. This work is part of the Google Season of Docs project.
llvm-svn: 371096
[Patch by Leonid Mashinskiy]
Visual Studio CMake generator is multi-target and does not define
CMAKE_BUILD_TYPE, so Debug build on VS was failing due selection of release
python library. This patch reverts back some of latest changes and fixes
building by raw VS using CMake expression generators.
Differential Revision: https://reviews.llvm.org/D66994
llvm-svn: 371090
If we have:
bb5:
br i1 %arg3, label %bb6, label %bb7
bb6:
%tmp = getelementptr inbounds i32, i32* %arg1, i64 2
store i32 3, i32* %tmp, align 4
br label %bb9
bb7:
%tmp8 = getelementptr inbounds i32, i32* %arg1, i64 2
store i32 3, i32* %tmp8, align 4
br label %bb9
bb9: ; preds = %bb4, %bb6, %bb7
...
We can't sink stores directly into bb9.
This patch creates new BB that is successor of %bb6 and %bb7
and sinks stores into that block.
SplitFooterBB is the parameter to the pass that controls
that behavior.
Change-Id: I7fdf50a772b84633e4b1b860e905bf7e3e29940f
Differential: https://reviews.llvm.org/D66234
llvm-svn: 371089
Summary:
Avoid visiting an instruction more than once by using a map.
This is similar to https://reviews.llvm.org/rL361416.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67198
llvm-svn: 371086
```
Writer<ELFT>::run
assignFileOffsets
setFileOffset
computeFileOffset
os->ptLoad->p_align may be smaller than config->maxPageSize
setPhdrs
p_align = max(p_align, config->maxPageSize)
```
If we move the config->maxPageSize logic to the constructor of
PhdrEntry, computeFileOffset can be simplified.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D67211
llvm-svn: 371085
A number of inline assembly constraints are currently supported by LLVM, but rejected as invalid by Clang:
Target independent constraints:
s: An integer constant, but allowing only relocatable values
ARM specific constraints:
j: An immediate integer between 0 and 65535 (valid for MOVW)
x: A 32, 64, or 128-bit floating-point/SIMD register: s0-s15, d0-d7, or q0-q3
N: An immediate integer between 0 and 31 (Thumb1 only)
O: An immediate integer which is a multiple of 4 between -508 and 508. (Thumb1 only)
This patch adds support to Clang for the missing constraints along with some checks to ensure that the constraints are used with the correct target and Thumb mode, and that immediates are within valid ranges (at least where possible). The constraints are already implemented in LLVM, but just a couple of minor corrections to checks (V8M Baseline includes MOVW so should work with 'j', 'N' and 'O' shouldn't be valid in Thumb2) so that Clang and LLVM are in line with each other and the documentation.
Differential Revision: https://reviews.llvm.org/D65863
Change-Id: I18076619e319bac35fbb60f590c069145c9d9a0a
llvm-svn: 371079
As discussed on D64551 and PR43227, we don't correctly handle cases where the base load has a non-zero byte offset.
Until we can properly handle this, we must bail from EltsFromConsecutiveLoads.
llvm-svn: 371078
I'm still unable to reproduce this locally, so let's see if this
is enough to make the bots happy. The missing dimension parameter
seems to be the biggest difference between these tests and
TestIOHandlerCompletion.py which runs just fine on the same bot,
so that's the motivation for trying this out.
llvm-svn: 371077
Summary:
Add bugprone-argument-comment option: IgnoreSingleArgument.
When true, the check will ignore the single argument.
Sometimes, it's not necessary to add comment to single argument.
For example:
> std::string name("Yubo Xie");
> pScreen->SetWidth(1920);
> pScreen->SetHeight(1080);
This option can ignore such single argument in bugprone-argument-comment check.
Reviewers: alexfh
Reviewed By: alexfh
Subscribers: cfe-commits
Tags: #clang
Patch by Yubo Xie.
Differential Revision: https://reviews.llvm.org/D67056
llvm-svn: 371075
Linkers (ld.bfd/gold/lld) place the section header table at the very
end. This allows tools to strip it, which is optional in executable/shared objects.
In addition, if we add or section, the size of the section header table
will change. Placing the section header table in the end keeps section
offsets unchanged.
yaml2obj currently places the section header table immediately after the
program header. Follow what linkers do to make offset updating easier.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D67221
llvm-svn: 371074
D62179 introduced a regression. llvm-readelf lose the ability to dump the dynamic symbols
when there is .dynamic section with a DT_SYMTAB, but there are no program headers:
https://reviews.llvm.org/D62179#1652778
Below is a program flow before the D62179 change:
1) Find SHT_DYNSYM.
2) Find there is no PT_DYNAMIC => don't try to parse it.
3) Print dynamic symbols using information about them found on step (1).
And after the change it became:
1) Find SHT_DYNSYM.
2) Find there is no PT_DYNAMIC => find SHT_DYNAMIC.
3) Parse dynamic table, but fail to handle the DT_SYMTAB because of the absence of the PT_LOAD. Report the "Virtual address is not in any segment" error.
This patch fixes the issue. For doing this it checks that the value of DT_SYMTAB was
mapped to a segment. If not - it ignores it.
Differential revision: https://reviews.llvm.org/D67078
llvm-svn: 371071
This reverts r370502, which broke the use case of a copy-only T (with a
deleted move constructor) when exceptions are disabled. Until we figure
out the right behavior, I'm reverting the commit.
llvm-svn: 371068
Summary:
r337347 added support for the Signal Processing Engine (SPE) to LLVM.
This follows that up with the clang side.
This adds -mspe and -mno-spe, to match GCC.
Subscribers: nemanjai, kbarton, cfe-commits
Differential Revision: https://reviews.llvm.org/D49754
llvm-svn: 371066
This attempts to just fix the creation of VPT blocks, fixing up the iterating,
which instructions are considered in the bundle, and making sure that we do not
overrun the end of the block.
Differential Revision: https://reviews.llvm.org/D67219
llvm-svn: 371064
G_FENCE comes form fence instruction. For MIPS fence is generated in
AtomicExpandPass when atomic instruction gets surrounded with fence
instruction when needed.
G_FENCE arguments don't have LLT, because of that there is no job for
legalizer and regbankselect. Instruction select G_FENCE for MIPS32.
Differential Revision: https://reviews.llvm.org/D67181
llvm-svn: 371056
Jan Korous