Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: sdesmalen, rriddle, efriedma
Reviewed By: sdesmalen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77263
Instead, represent the mask as out-of-line data in the instruction. This
should be more efficient in the places that currently use
getShuffleVector(), and paves the way for further changes to add new
shuffles for scalable vectors.
This doesn't change the syntax in textual IR. And I don't currently plan
to change the bitcode encoding in this patch, although we'll probably
need to do something once we extend shufflevector for scalable types.
I expect that once this is finished, we can then replace the raw "mask"
with something more appropriate for scalable vectors. Not sure exactly
what this looks like at the moment, but there are a few different ways
we could handle it. Maybe we could try to describe specific shuffles.
Or maybe we could define it in terms of a function to convert a fixed-length
array into an appropriate scalable vector, using a "step", or something
like that.
Differential Revision: https://reviews.llvm.org/D72467
Canonicalize the case when a scalar extracted from a vector is
truncated. Transform such cases to bitcast-then-extractelement.
This will enable erasing the truncate operation.
This commit fixes PR45314.
reviewers: spatel
Differential revision: https://reviews.llvm.org/D76983
The existence of the class is more confusing than helpful, I think; the
commonality is mostly just "GEP is legal", which can be queried using
APIs on GetElementPtrInst.
Differential Revision: https://reviews.llvm.org/D75660
Summary: Rewrite the fsub-0.0 idiom to fneg and always emit fneg for fp
negation. This also extends the scalarization cost in instcombine for unary
operators to result in the same IR rewrites for fneg as for the idiom.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D75467
This makes sure that the constant expression bitcast goes through
target-dependent constant folding, and thus avoids an additional
iteration of InstCombine.
Spin-off from D75407. As described there, ConstantFoldConstant()
currently returns null for non-ConstantExpr/ConstantVector inputs,
but otherwise always returns non-null, independently of whether
any folding has happened or not.
This is confusing and makes consumer code more complicated.
I would expect either that ConstantFoldConstant() returns only if
it actually folded something, or that it always returns non-null.
I'm going to the latter possibility here, which appears to be more
useful considering existing usage.
Differential Revision: https://reviews.llvm.org/D75543
Use UnaryOperator::CreateFNeg instead.
Summary:
With the introduction of the native fneg instruction, the
fsub -0.0, %x idiom is obsolete. This patch makes LLVM
emit fneg instead of the idiom in all places.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D75130
This is a bug noted in the recent D72733 and seen
in the similar transform just above the changed source code.
I added tests with illegal types and zexts to show the bug -
we could transform legal phi ops to illegal, etc. I did not add
tests with trunc because we won't see any diffs on those patterns.
That is because InstCombiner::SliceUpIllegalIntegerPHI() appears to
do those transforms independently of datalayout. It can also create
more casts than are present in existing code.
There are some existing regression tests that do not include a
datalayout that would be altered by this fix. I assumed that the
lack of a datalayout in those regression files is an oversight, so
I added the minimal layout (make i32 legal) necessary to preserve
behavior on those tests.
Differential Revision: https://reviews.llvm.org/D73907
Adds a replaceOperand() helper, which is like Instruction.setOperand()
but adds the old operand to the worklist. This reduces the amount of
missing or incorrect worklist management.
This only applies the helper to a relatively small subset of
setOperand() calls in InstCombine, namely those of the pattern
`I.setOperand(); return &I;`, where it is most obviously applicable.
Differential Revision: https://reviews.llvm.org/D73803
This renames Worklist.AddDeferred() to Worklist.add() and
Worklist.Add() to Worklist.push(). The intention here is that
Worklist.add() should be the go-to method for explicit worklist
management, while the raw Worklist.push() is mostly for
InstCombine internals. I will then migrate uses of Worklist.push()
to Worklist.add() in followup changes.
As suggested by spatel on D73411 I'm also changing the remaining
method names to lowercase first character, in line with current
coding standards.
Differential Revision: https://reviews.llvm.org/D73745
D47163 created a rule that we should not change the casted
type of a select when we have matching types in its compare condition.
That was intended to help vector codegen, but it also could create
situations where we miss subsequent folds as shown in PR44545:
https://bugs.llvm.org/show_bug.cgi?id=44545
By using shouldChangeType(), we can continue to get the vector folds
(because we always return false for vector types). But we also solve
the motivating bug because it's ok to narrow the scalar select in that
example.
Our canonicalization rules around select are a mess, but AFAICT, this
will not induce any infinite looping from the reverse transform (but
we'll need to watch for that possibility if committed).
Side note: there's a similar use of shouldChangeType() for phi ops
just below this diff, and the source and destination types appear to
be reversed.
Differential Revision: https://reviews.llvm.org/D72733
This fixes the issue encountered in D71164. Instead of using a
range-based for, manually iterate over the users and advance the
iterator beforehand, so we do not skip any users due to iterator
invalidation.
Differential Revision: https://reviews.llvm.org/D72657
This reverts commit a041c4ec6f.
This looks like a non-trivial change and there has been no code
reviews (at least there were no phabricator revisions attached to the
commit description). It is also causing a regression in one of our
downstream integration tests, we haven't been able to come up with a
minimal reproducer yet.
This does not solve PR17101, but it is one of the
underlying diffs noted here:
https://bugs.llvm.org/show_bug.cgi?id=17101#c8
We could ease the one-use checks for the 'clear'
(no 'not' op) half of the transform, but I do not
know if that asymmetry would make things better
or worse.
Proofs:
https://rise4fun.com/Alive/uVB
Name: masked bit set
%sh1 = shl i32 1, %y
%and = and i32 %sh1, %x
%cmp = icmp ne i32 %and, 0
%r = zext i1 %cmp to i32
=>
%s = lshr i32 %x, %y
%r = and i32 %s, 1
Name: masked bit clear
%sh1 = shl i32 1, %y
%and = and i32 %sh1, %x
%cmp = icmp eq i32 %and, 0
%r = zext i1 %cmp to i32
=>
%xn = xor i32 %x, -1
%s = lshr i32 %xn, %y
%r = and i32 %s, 1
Judging by the existing comments, this was the intention, but the
transform never actually checked if the existing phi's would be removed.
See https://bugs.llvm.org/show_bug.cgi?id=44242 for an example where
this causes much worse code generation on AMDGPU.
Differential Revision: https://reviews.llvm.org/D71209
Summary:
This patch adds instructions to the InstCombine worklist after they are properly inserted. This way we don't get `<badref>`s printed when logging added instructions.
It also adds a check in `Worklist::Add` that ensures that all added instructions have parents.
Simple test case that illustrates the difference when run with `--debug-only=instcombine`:
```
define i32 @test35(i32 %a, i32 %b) {
%1 = or i32 %a, 1135
%2 = or i32 %1, %b
ret i32 %2
}
```
Before this patch:
```
INSTCOMBINE ITERATION #1 on test35
IC: ADDING: 3 instrs to worklist
IC: Visiting: %1 = or i32 %a, 1135
IC: Visiting: %2 = or i32 %1, %b
IC: ADD: %2 = or i32 %a, %b
IC: Old = %3 = or i32 %1, %b
New = <badref> = or i32 %2, 1135
IC: ADD: <badref> = or i32 %2, 1135
...
```
With this patch:
```
INSTCOMBINE ITERATION #1 on test35
IC: ADDING: 3 instrs to worklist
IC: Visiting: %1 = or i32 %a, 1135
IC: Visiting: %2 = or i32 %1, %b
IC: ADD: %2 = or i32 %a, %b
IC: Old = %3 = or i32 %1, %b
New = <badref> = or i32 %2, 1135
IC: ADD: %3 = or i32 %2, 1135
...
```
Reviewers: fhahn, davide, spatel, foad, grosser, nikic
Reviewed By: nikic
Subscribers: nikic, lebedev.ri, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71093
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
This fixes the buildbot failures.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
This makes no difference currently because we don't apply FMF
to FP casts, but that may change.
This could also be a place to add a fold for select with fptrunc,
so it will make that patch easier/smaller.
This reverts these two commits
[InstCombine] Turn (extractelement <1 x i64/double> (bitcast (x86_mmx))) into a single bitcast from x86_mmx to i64/double.
[InstCombine] Don't transform bitcasts between x86_mmx and v1i64 into insertelement/extractelement
We're seeing at least one internal test failure related to a
bitcast that was previously before an inline assembly block
containing emms being placed after it. This leads to the mmx
state ending up not empty after the emms. IR has no way to
make any specific guarantees about this. Reverting these patches
to get back to previous behavior which at least worked for this
test.
Summary:
optimizeVectorResize is rewriting patterns like:
%1 = bitcast vector %src to integer
%2 = trunc/zext %1
%dst = bitcast %2 to vector
Since bitcasting between integer an vector types gives
different integer values depending on endianness, we need
to take endianness into account. As it happens the old
implementation only produced the correct result for little
endian targets.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=44178
Reviewers: spatel, lattner, lebedev.ri
Reviewed By: spatel, lebedev.ri
Subscribers: lebedev.ri, hiraditya, uabelho, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70844
x86_mmx is conceptually a vector already. Don't introduce an extra conversion between it and scalar i64.
I'm using VectorType::isValidElementType which checks for floating point, integer, and pointers to hopefully make this more readable than just blacklisting x86_mmx.
Differential Revision: https://reviews.llvm.org/D69964
Follow-up to D68244 to account for a corner case discussed in:
https://bugs.llvm.org/show_bug.cgi?id=43501
Add one more restriction: if the pointer is deref-or-null and in a non-default
(non-zero) address space, we can't assume inbounds.
Differential Revision: https://reviews.llvm.org/D68706
llvm-svn: 374728
bitcast <N x i8> (shuf X, undef, <N, N-1,...0>) to i{N*8} --> bswap (bitcast X to i{N*8})
In PR43146:
https://bugs.llvm.org/show_bug.cgi?id=43146
...we have a more complicated case where SLP is making a mess of bswap. This patch won't
do anything for that currently, but we need to improve bswap recognition in instcombine,
SLP, and/or a standalone pass to avoid that problem.
This is limited using the data-layout so we don't try to do this transform with actual
vector types. The backend does not appear to have folds to convert in either direction,
so we don't want to mess up something that is actually better lowered as a shuffle.
On x86, we're trading something like this:
vmovd %edi, %xmm0
vpshufb LCPI0_0(%rip), %xmm0, %xmm0 ## xmm0 = xmm0[3,2,1,0,u,u,u,u,u,u,u,u,u,u,u,u]
vmovd %xmm0, %eax
For:
movl %edi, %eax
bswapl %eax
Differential Revision: https://reviews.llvm.org/D66965
llvm-svn: 370659
This reverts commit bc4a63fd3c, this is a
speculative revert to fix a number of sanitizer bots (like
sanitizer-x86_64-linux-bootstrap-ubsan) that have started to see stage2
compiler crashes, presumably due to a miscompile.
llvm-svn: 367029
trunc (load X) --> load (bitcast X to narrow type)
We have this transform in DAGCombiner::ReduceLoadWidth(), but the truncated
load pattern can interfere with other instcombine transforms, so I'd like to
allow the fold sooner.
Example:
https://bugs.llvm.org/show_bug.cgi?id=16739
...in that report, we have bitcasts bracketing these ops, so those could get
eliminated too.
We've generally ruled out widening of loads early in IR ( LoadCombine -
http://lists.llvm.org/pipermail/llvm-dev/2016-September/105291.html ), but
that reasoning may not apply to narrowing if we can preserve information
such as the dereferenceable range.
Differential Revision: https://reviews.llvm.org/D64432
llvm-svn: 367011
Sanjay Patel