In case of using a "nested" relocation expressions like this
`%hi(%neg(%gp_rel()))`, N32 ABI requires generation of three consecutive
relocations. That differs from the N64 ABI case where all relocations
are packed into the single relocation record.
llvm-svn: 313879
The N32 ABI uses RELA relocation format, do not use 3-in-1 relocation's
encoding, and uses ELFCLASS32. This change passes the `IsN32` flag
to the `MCAsmBackend` to distinguish usage of N32 ABI.
We still do not handle some cases like providing the `-target-abi=o32`
command line option with the `mips64` target triple. That's why
elf_header.s contains some "FIXME" strings. This case will be fixed in
a separate patch.
Differential revision: https://reviews.llvm.org/D37960
llvm-svn: 313873
The other members of the dext family of instructions (dextm, dextu) are
traditionally handled by the assembler selecting the right variant of
'dext' depending on the values of the position and size operands.
When these instructions are disassembled, rather than reporting the
actual instruction, an equivalent aliased form of 'dext' is generated
and is reported. This is to mimic the behaviour of binutils.
Reviewers: slthakur, nitesh.jain, atanasyan
Differential Revision: https://reviews.llvm.org/D34887
llvm-svn: 313276
Traditionally GAS has provided automatic selection between dins, dinsm and
dinsu. Binutils also disassembles all instructions in that family as 'dins'
rather than the actual instruction.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D34877
llvm-svn: 313267
This patch corrects the definition of the DINSM instruction.
Specification for DINSM instruction for Mips64 says that size operand should
be 2 <= size <= 64, but it is defined as uimm5_inssize_plus1 which gives
range of 1 .. 32.
Patch by Aleksandar Beserminji.
Differential Revision: https://reviews.llvm.org/D37683
llvm-svn: 313149
This adjusts the tests to hopfully pacify the llvm-clang-x86_64-expensive-checks-win
buildbot.
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 310834
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
The last version of this patch broke one of the expensive checks buildbots,
this version changes the failing test/MC/Mips/mt/invalid.s and other invalid
tests to write the errors to a file and run FileCheck on that, rather than
relying on the 'not llvm-mc ... <%s 2>&1 | Filecheck %s' idiom.
Hopefully this will sarisfy the buildbot.
llvm-svn: 308023
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 307836
This patch implements the .module and .set directives for the MT ASE,
notably that .module sets the relevant flags in .MIPS.abiflags and .set
doesn't.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35249
llvm-svn: 307716
Preparatory work for adding the MIPS MT (multi-threading) ASE instructions.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35247
llvm-svn: 307679
In particular, use CALL16 (similar to O32) for address loads into T9 for certain
cases. Otherwise use a %got_disp relocation to load the address of a symbol.
Small offsets (small enough to fit in a 16-bit signed immediate) can be used and
are added to the symbol address after it is loaded from the GOT. Larger offsets
are currently unsupported and result in an error from the assembler.
Reviewers: sdardis
Reviewed By: sdardis
Patch by: John Baldwin
Subscribers: llvm-commits, seanbruno, arichardson, emaste, dim
Differential Revision: https://reviews.llvm.org/D33948
llvm-svn: 306831
Add the instruction aliases for ds(r|l)l for the two operand alias
of ds(r|l)lv and the aliases ds(r|l)l with the three register operands.
llvm-svn: 306405
After fixing (r306173) a failing test in the lld test suite (r306173),
reland r306095.
Original commit message:
[mips] Fix register positions in the aui/daui instructions
Swapped the position of the rt and rs register in the aui/daui
instructions for mips32r6 and mips64r6. With this change, the format of
the generated instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
llvm-svn: 306174
ELF/mips-plt-r6.s in lld-test is failing. Reverting the change.
Original commit message:
[mips] Fix register positions in the aui/daui instructions
Swapped the position of the rt and rs register in the aut/daui
instructions for mips32r6 and mips64r6. With this change, the format of
the generated instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
llvm-svn: 306099
Swapped the position of the rt and rs register in the aut/daui instructions
for mips32r6 and mips64r6. With this change, the format of the generated
instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D33988
llvm-svn: 306095
This patch allows $AT to be used as a register name in assembly files.
Currently only $at is recognized as a valid register name.
Patch by Stanislav Ocovaj.
Differential Revision: https://reviews.llvm.org/D34348
llvm-svn: 306007
Rather than creating a separate ".rdata" section distinct from the
customary ".rodata" in ELF, ".rdata" switches to the ".rodata" section.
This patch relands r305949 and r305950 with the correct commit message
and addresses nit raised during review.
Patch By: John Baldwin!
Differential Revision: https://reviews.llvm.org/D34452
llvm-svn: 305995
Changed immediate type for repl.ph from uimm10 to simm10 as per the specs.
Repl.qb still accepts uimm8. Both instructions now mimic the behaviour of
GNU as.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D33594
llvm-svn: 304918
In case of microMIPS mode %gottprel operator should emit microMIPS
relocation R_MICROMIPS_TLS_GOTTPREL, not R_MIPS_TLS_GOTTPREL.
Differential Revision: http://reviews.llvm.org/D32617
llvm-svn: 301763
This patch fixes decoding of size and position for DINSM
and DINSU instructions.
Differential Revision: https://reviews.llvm.org/D31072
llvm-svn: 298593
This patch adds support for recognizing more patterns to match to DEXT and
CINS instructions.
It finds cases where multiple instructions could be replaced with a single
DEXT or CINS instruction.
For example, for the following:
define i64 @dext_and32(i64 zeroext %a) {
entry:
%and = and i64 %a, 4294967295
ret i64 %and
}
instead of generating:
0000000000000088 <dext_and32>:
88: 64010001 daddiu at,zero,1
8c: 0001083c dsll32 at,at,0x0
90: 6421ffff daddiu at,at,-1
94: 03e00008 jr ra
98: 00811024 and v0,a0,at
9c: 00000000 nop
the following gets generated:
0000000000000068 <dext_and32>:
68: 03e00008 jr ra
6c: 7c82f803 dext v0,a0,0x0,0x20
Cases that are covered:
DEXT:
1. and $src, mask where mask > 0xffff
2. zext $src zero extend from i32 to i64
CINS:
1. and (shl $src, pos), mask
2. shl (and $src, mask), pos
3. zext (shl $src, pos) zero extend from i32 to i64
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D30464
llvm-svn: 297832
Previously LLVM was assuming 32-bit signed immediates which results in and with
a bitmask that has bit 31 set to incorrectly include bits 63-32 in the result.
After applying this patch I can now compile all of the FreeBSD mips assembly
code with clang.
This issue also affects the nor, slt and sltu macros and I will fix those in a
separate review.
Patch By: Alexander Richardson
Commit message reformatted by sdardis.
Reviewers: atanasyan, theraven, sdardis
Differential Revision: https://reviews.llvm.org/D30298
llvm-svn: 296125
This patch adjusts the most relaxed predicate of immediate operands to accept
immediate forms such as ~(0xf0000000|0x000f00000). Previously these forms
would be accepted by GAS and rejected by IAS.
This partially resolves PR/30383.
Thanks to Sean Bruno for reporting the issue!
Reviewers: slthakur, seanbruno
Differential Revision: https://reviews.llvm.org/D29218
llvm-svn: 295965
Clean up the implementation of divide macro expansion by getting rid of a
FIXME regarding magic numbers and branch instructions. Match GAS' behaviour
for expansion of ddiv / div in the two and three operand cases. Add the two
operand alias for MIPSR6. Finally, optimize macro expansion cases where the
divisior is the $zero register.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D29887
llvm-svn: 294960
Previously only the superscalar scheduled expansion of the dla macro for
MIPS64 was implemented. If assembler temporary register is not available
and the optional source register is not the destination register, synthesize
the address using the naive solution of adds and shifts.
This partially resolves PR/30383.
Thanks to Sean Bruno for reporting the issue!
Reviewers: slthakur, seanbruno
Differential Revision: https://reviews.llvm.org/D29328
llvm-svn: 294182
The .end <symbol> directive for MIPS marks the end of a symbol and sets the
symbol's size. Previously, the corresponding emitDirective handler asserted
that a function's size could be evaluated to an absolute value at that point
in time.
This cannot be done with when directives like .align have been encountered,
instead set the function's size to the corresponding symbolic expression and
let ELFObjectWriter resolve the expression to an absolute value. This avoids
a redundant call to evaluateAsAbsolute.
llvm-svn: 294012
On ELF every section can have a corresponding section symbol. When in
an assembly file we have
.quad .text
the '.text' refers to that symbol.
The way we used to handle them is to leave .text an undefined symbol
until the very end when the object writer would map them to the
actual section symbol.
The problem with that is that anything before the end would see an
undefined symbol. This could result in bad diagnostics
(test/MC/AArch64/label-arithmetic-diags-elf.s), or incorrect results
when using the asm streamer (est/MC/Mips/expansion-jal-sym-pic.s).
Fixing this will also allow using the section symbol earlier for
setting sh_link of SHF_METADATA sections.
This patch includes a few hacks to avoid changing our behaviour when
handling conflicts between section symbols and other symbols. I
reported pr31850 to track that.
llvm-svn: 293936
The GAS assembler supports the ".set bopt" directive but according
to the sources it doesn't do anything. It's supposed to optimize
branches by filling the delay slot of a branch with it's target.
This patch teaches the MIPS asm parser to accept both and warn in
the case of 'bopt' that the bopt directive is unsupported.
This resolves PR/31841.
Thanks to Sean Bruno for reporting the issue!
llvm-svn: 293798
This patch makes one change to GOT handling and two changes to N64's
relocation model handling. Furthermore, the jumptable encodings have
been corrected for static N64.
Big GOT handling is now done via a new SDNode MipsGotHi - this node is
unconditionally lowered to an lui instruction.
The first change to N64's relocation handling is the lifting of the
restriction that N64 always uses PIC. Now it is possible to target static
environments.
The second change adds support for 64 bit symbols and enables them by
default. Previously N64 had patterns for sym32 mode only. In this mode all
symbols are assumed to have 32 bit addresses. sym32 mode support
is selectable with attribute 'sym32'. A follow on patch for clang will
add the necessary frontend parameter.
This partially resolves PR/23485.
Thanks to Brooks Davis for reporting the issue!
This version corrects a "Conditional jump or move depends on uninitialised
value(s)" error detected by valgrind present in the original commit.
Reviewers: dsanders, seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D23652
llvm-svn: 293279
This patch makes one change to GOT handling and two changes to N64's
relocation model handling. Furthermore, the jumptable encodings have
been corrected for static N64.
Big GOT handling is now done via a new SDNode MipsGotHi - this node is
unconditionally lowered to an lui instruction.
The first change to N64's relocation handling is the lifting of the
restriction that N64 always uses PIC. Now it is possible to target static
environments.
The second change adds support for 64 bit symbols and enables them by
default. Previously N64 had patterns for sym32 mode only. In this mode all
symbols are assumed to have 32 bit addresses. sym32 mode support
is selectable with attribute 'sym32'. A follow on patch for clang will
add the necessary frontend parameter.
This partially resolves PR/23485.
Thanks to Brooks Davis for reporting the issue!
Reviewers: dsanders, seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D23652
llvm-svn: 293164
Permit explicit $fcc<X> operand in c.cond.fmt instruction.
Add c.cond.fmt to the MIPS to microMIPS instruction mapping table.
Check that $fcc1 - $fcc7 are unusable for MIPS-I to MIPS-III for
c.cond.fmt, bc1t, bc1f.
Reviewers: seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D24510
llvm-svn: 292117
Simon Atanasyan