Static alloca usually doesn't generate any machine instructions, so it has 0 cost.
Differential Revision: https://reviews.llvm.org/D37879
llvm-svn: 313410
For instructions that unlikely generate machine instructions, they should also have 0 latency.
Differential Revision: https://reviews.llvm.org/D37833
llvm-svn: 313288
Summary:
LAA can only emit run-time alias checks for pointers with affine AddRec
SCEV expressions. However, non-AddRecExprs can be now be converted to
affine AddRecExprs using SCEV predicates.
This change tries to add the minimal set of SCEV predicates in order
to enable run-time alias checking.
Reviewers: anemet, mzolotukhin, mkuper, sanjoy, hfinkel
Reviewed By: hfinkel
Subscribers: mssimpso, Ayal, dorit, roman.shirokiy, mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D17080
llvm-svn: 313012
Current TargetTransformInfo can support throughput cost model and code size model, but sometimes we also need instruction latency cost model in different optimizations. Hal suggested we need a single public interface to query the different cost of an instruction. So I proposed following interface:
enum TargetCostKind {
TCK_RecipThroughput, ///< Reciprocal throughput.
TCK_Latency, ///< The latency of instruction.
TCK_CodeSize ///< Instruction code size.
};
int getInstructionCost(const Instruction *I, enum TargetCostKind kind) const;
All clients should mainly use this function to query the cost of an instruction, parameter <kind> specifies the desired cost model.
This patch also provides a simple default implementation of getInstructionLatency.
The default getInstructionLatency provides latency numbers for only small number of instruction classes, those latency numbers are only reasonable for modern OOO processors. It can be extended in following ways:
Add more detail into this function.
Add getXXXLatency function and call it from here.
Implement target specific getInstructionLatency function.
Differential Revision: https://reviews.llvm.org/D37170
llvm-svn: 312832
Summary:
Add patterns for
fptoui <16 x float> to <16 x i8>
fptoui <16 x float> to <16 x i16>
Reviewers: igorb, delena, craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37505
llvm-svn: 312704
In LLVM IR the following code:
%r = urem <ty> %t, %b
is equivalent to
%q = udiv <ty> %t, %b
%s = mul <ty> nuw %q, %b
%r = sub <ty> nuw %t, %q ; (t / b) * b + (t % b) = t
As UDiv, Mul and Sub are already supported by SCEV, URem can be implemented
with minimal effort using that relation:
%r --> (-%b * (%t /u %b)) + %t
We implement two special cases:
- if %b is 1, the result is always 0
- if %b is a power-of-two, we produce a zext/trunc based expression instead
That is, the following code:
%r = urem i32 %t, 65536
Produces:
%r --> (zext i16 (trunc i32 %a to i16) to i32)
Note that while this helps get a tighter bound on the range analysis and the
known-bits analysis, this exposes some normalization shortcoming of SCEVs:
%div = udim i32 %a, 65536
%mul = mul i32 %div, 65536
%rem = urem i32 %a, 65536
%add = add i32 %mul, %rem
Will usually not be reduced.
llvm-svn: 312329
Summary:
This patch teaches PostDominatorTree about infinite loops. It is built on top of D29705 by @dberlin which includes a very detailed motivation for this change.
What's new is that the patch also teaches the incremental updater how to deal with reverse-unreachable regions and how to properly maintain and verify tree roots. Before that, the incremental algorithm sometimes ended up preserving reverse-unreachable regions after updates that wouldn't appear in the tree if it was constructed from scratch on the same CFG.
This patch makes the following assumptions:
- A sequence of updates should produce the same tree as a recalculating it.
- Any sequence of the same updates should lead to the same tree.
- Siblings and roots are unordered.
The last two properties are essential to efficiently perform batch updates in the future.
When it comes to the first one, we can decide later that the consistency between freshly built tree and an updated one doesn't matter match, as there are many correct ways to pick roots in infinite loops, and to relax this assumption. That should enable us to recalculate postdominators less frequently.
This patch is pretty conservative when it comes to incremental updates on reverse-unreachable regions and ends up recalculating the whole tree in many cases. It should be possible to improve the performance in many cases, if we decide that it's important enough.
That being said, my experiments showed that reverse-unreachable are very rare in the IR emitted by clang when bootstrapping clang. Here are the statistics I collected by analyzing IR between passes and after each removePredecessor call:
```
# functions: 52283
# samples: 337609
# reverse unreachable BBs: 216022
# BBs: 247840796
Percent reverse-unreachable: 0.08716159869015269 %
Max(PercRevUnreachable) in a function: 87.58620689655172 %
# > 25 % samples: 471 ( 0.1395104988314885 % samples )
... in 145 ( 0.27733680163724345 % functions )
```
Most of the reverse-unreachable regions come from invalid IR where it wouldn't be possible to construct a PostDomTree anyway.
I would like to commit this patch in the next week in order to be able to complete the work that depends on it before the end of my internship, so please don't wait long to voice your concerns :).
Reviewers: dberlin, sanjoy, grosser, brzycki, davide, chandlerc, hfinkel
Reviewed By: dberlin
Subscribers: nhaehnle, javed.absar, kparzysz, uabelho, jlebar, hiraditya, llvm-commits, dberlin, david2050
Differential Revision: https://reviews.llvm.org/D35851
llvm-svn: 310940
ValueTracking has to strike a balance when attempting to propagate information
backwards from assumes, because if the information is trivially propagated
backwards, it can appear to LLVM that the assumption is known to be true, and
therefore can be removed.
This is sound (because an assumption has no semantic effect except for causing
UB), but prevents the assume from allowing further optimizations.
The isEphemeralValueOf check exists to try and prevent this issue by not
removing the source of an assumption. This tries to make it a little bit more
general to handle the case of side-effectful instructions, such as in
%0 = call i1 @get_val()
%1 = xor i1 %0, true
call void @llvm.assume(i1 %1)
Patch by Ariel Ben-Yehuda, thanks!
Differential Revision: https://reviews.llvm.org/D36590
llvm-svn: 310859
causing compile time issues.
Moreover, the patch *deleted* the flag in addition to changing the
default, and links to a code review that doesn't even discuss the flag
and just has an update to a Clang test case.
I've followed up on the commit thread to ask for numbers on compile time
at this point, leaving the flag in place until things stabilize, and
pointing at specific code that seems to exhibit excessive compile time
with this patch.
Original commit message for r310583:
"""
[ValueTracking] Enabling ValueTracking patch by default (recommit). Part 2.
The original patch was an improvement to IR ValueTracking on
non-negative integers. It has been checked in to trunk (D18777,
r284022). But was disabled by default due to performance regressions.
Perf impact has improved. The patch would be enabled by default.
""""
llvm-svn: 310816
Add missing SK_PermuteSingleSrc costs for AVX2 targets and earlier, also added some of the simpler SK_PermuteTwoSrc costs to support splitting of SK_PermuteSingleSrc shuffles
llvm-svn: 310632
The original patch was an improvement to IR ValueTracking on non-negative
integers. It has been checked in to trunk (D18777, r284022). But was disabled by
default due to performance regressions.
Perf impact has improved. The patch would be enabled by default.
Reviewers: reames, hfinkel
Differential Revision: https://reviews.llvm.org/D34101
Patch by: Olga Chupina <olga.chupina@intel.com>
llvm-svn: 310583
Pushes the sext onto the operands of a Sub if NSW is present.
Also adds support for propagating the nowrap flags of the
llvm.ssub.with.overflow intrinsic during analysis.
Differential Revision: https://reviews.llvm.org/D35256
llvm-svn: 310117
The patch rL309080 was reverted because it did not clean up the cache on "forgetValue"
method call. This patch re-enables this change, adds the missing check and introduces
two new unit tests that make sure that the cache is cleaned properly.
Differential Revision: https://reviews.llvm.org/D36087
llvm-svn: 309925
This reverts commit r309080. The patch needs to clear out the
ScalarEvolution::ExitLimits cache in forgetMemoizedResults.
I've replied on the commit thread for the patch with more details.
llvm-svn: 309357
This patch adds a cache for computeExitLimit to save compilation time. A lot of examples of
tests that take extensive time to compile are attached to the bug 33494.
Differential Revision: https://reviews.llvm.org/D35827
llvm-svn: 309080
When SCEV calculates product of two SCEVAddRecs from the same loop, it
tries to combine them into one big AddRecExpr. If the sizes of the initial
SCEVs were `S1` and `S2`, the size of their product is `S1 + S2 - 1`, and every
operand of the resulting SCEV is combined from operands of initial SCEV and
has much higher complexity than they have.
As result, if we try to calculate something like:
%x1 = {a,+,b}
%x2 = mul i32 %x1, %x1
%x3 = mul i32 %x2, %x1
%x4 = mul i32 %x3, %x2
...
The size of such SCEVs grows as `2^N`, and the arguments
become more and more complex as we go forth. This leads
to long compilation and huge memory consumption.
This patch sets a limit after which we don't try to combine two
`SCEVAddRecExpr`s into one. By default, max allowed size of the
resulting AddRecExpr is set to 16.
Differential Revision: https://reviews.llvm.org/D35664
llvm-svn: 308847
This adds support for the new 32-bit vector float instructions of z14.
This includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions, including new LLVM intrinsics.
- Scheduler description support for the instructions.
- Update to the vector cost function calculations.
In general, CodeGen support for the new v4f32 instructions closely
matches support for the existing v2f64 instructions.
llvm-svn: 308195
Summary:
NetBSD shell sh(1) does not support ">& /dev/null" construct.
This is bashism. The portable and POSIX solution is to use:
"> /dev/null 2>&1".
This change fixes 22 Unexpected Failures on NetBSD/amd64
for the "check-llvm" target.
Sponsored by <The NetBSD Foundation>
Reviewers: joerg, dim, rnk
Reviewed By: joerg, rnk
Subscribers: rnk, davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D35277
llvm-svn: 307789
The patch was reverted due to a bug. The bug was that if the IV is the 2nd operand of the icmp
instruction, then the "Pred" variable gets swapped and differs from the instruction's predicate.
In this patch we use the original predicate to do the transformation.
Also added a test case that exercises this situation.
Differentian Revision: https://reviews.llvm.org/D35107
llvm-svn: 307477
It seems that the patch was reverted by mistake. Clang testing showed failure of the
MathExtras.SaturatingMultiply test, however I was unable to reproduce the issue on the
fresh code base and was able to confirm that the transformation introduced by the change
does not happen in the said test. This gives a strong confidence that the actual reason of
the failure of the initial patch was somewhere else, and that problem now seems to be
fixed. Re-submitting the change to confirm that.
llvm-svn: 307244
The dependence analysis was returning incorrect information when using the GEPs
to compute dependences. The analysis uses the GEP indices under certain
conditions, but was doing it incorrectly when the base objects of the GEP are
aliases, but pointing to different locations in the same array.
This patch adds another check for the base objects. If the base pointer SCEVs
are not equal, then the dependence analysis should fall back on the path
that uses the whole SCEV for the dependence check. This fixes PR33567.
Differential Revision: https://reviews.llvm.org/D34702
llvm-svn: 307203
This patch seems to cause failures of test MathExtras.SaturatingMultiply on
multiple buildbots. Reverting until the reason of that is clarified.
Differential Revision: https://reviews.llvm.org/rL307126
llvm-svn: 307135
-If there is a IndVar which is known to be non-negative, and there is a value which is also non-negative,
then signed and unsigned comparisons between them produce the same result. Both of those can be
seen in the same loop. To allow other optimizations to simplify them, we turn all instructions like
%c = icmp slt i32 %iv, %b
to
%c = icmp ult i32 %iv, %b
if both %iv and %b are known to be non-negative.
Differential Revision: https://reviews.llvm.org/D34979
llvm-svn: 307126
this patch updates the cost of addq\subq (add\subtract of vectors of 64bits)
based on the performance numbers of SLM arch.
Differential Revision: https://reviews.llvm.org/D33983
llvm-svn: 306974
In rL300494 there was an attempt to deal with excessive compile time on
invocations of getSign/ZeroExtExpr using local caching. This approach only
helps if we request the same SCEV multiple times throughout recursion. But
in the bug PR33431 we see a case where we request different values all the time,
so caching does not help and the size of the cache grows enormously.
In this patch we remove the local cache for this methods and add the recursion
depth limit instead, as we do for arithmetics. This gives us a guarantee that the
invocation sequence is limited and reasonably short.
Differential Revision: https://reviews.llvm.org/D34273
llvm-svn: 306785
Summary:
DFS InOut numbers currently get eagerly computer upon DomTree construction. They are only needed to answer dome dominance queries and they get invalidated by updates and recalculations. Because of that, it is faster in practice to compute them lazily when they are actually needed.
Clang built without this patch takes 6m 45s to boostrap on my machine, and with the patch applied 6m 38s.
Reviewers: sanjoy, dberlin, chandlerc
Reviewed By: dberlin
Subscribers: davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D34296
llvm-svn: 306778
In LLVM IR the following code:
%r = urem <ty> %t, %b
is equivalent to:
%q = udiv <ty> %t, %b
%s = mul <ty> nuw %q, %b
%r = sub <ty> nuw %t, %q ; (t / b) * b + (t % b) = t
As UDiv, Mul and Sub are already supported by SCEV, URem can be
implemented with minimal effort this way.
Note: While SRem and SDiv are also related this way, SCEV does not
provides SDiv yet.
llvm-svn: 306695
The cost of an interleaved access was only implemented for AVX512. For other
X86 targets an overly conservative Base cost was returned, resulting in
avoiding vectorization where it is actually profitable to vectorize.
This patch starts to add costs for AVX2 for most prominent cases of
interleaved accesses (stride 3,4 chars, for now).
Note1: Improvements of up to ~4x were observed in some of EEMBC's rgb
workloads; There is also a known issue of 15-30% degradations on some of these
workloads, associated with an interleaved access followed by type
promotion/widening; the resulting shuffle sequence is currently inefficient and
will be improved by a series of patches that extend the X86InterleavedAccess pass
(such as D34601 and more to follow).
Note 2: The costs in this patch do not reflect port pressure penalties which can
be very dominant in the case of interleaved accesses since most of the shuffle
operations are restricted to a single port. Further tuning, that may incorporate
these considerations, will be done on top of the upcoming improved shuffle
sequences (that is, along with the abovementioned work to extend
X86InterleavedAccess pass).
Differential Revision: https://reviews.llvm.org/D34023
llvm-svn: 306238
Using various methods, BasicAA tries to determine whether two
GetElementPtr memory locations alias when its base pointers are known
to be equal. When none of its heuristics are applicable, it falls back
to PartialAlias to, according to a comment, protect TBAA making a wrong
decision in case of unions and malloc. PartialAlias is not correct,
because a PartialAlias result implies that some, but not all, bytes
overlap which is not necessarily the case here.
AAResults returns the first analysis result that is not MayAlias.
BasicAA is always the first alias analysis. When it returns
PartialAlias, no other analysis is queried to give a more exact result
(which was the intention of returning PartialAlias instead of MayAlias).
For instance, ScopedAA could return a more accurate result.
The PartialAlias hack was introduced in r131781 (and re-applied in
r132632 after some reverts) to fix llvm.org/PR9971 where TBAA returns a
wrong NoAlias result due to a union. A test case for the malloc case
mentioned in the comment was not provided and I don't think it is
affected since it returns an omnipotent char anyway.
Since r303851 (https://reviews.llvm.org/D33328) clang does emit specific
TBAA for unions anymore (but "omnipotent char" instead). Hence, the
PartialAlias workaround is not required anymore.
This patch passes the test-suite and check-llvm/check-clang of a
self-hoisted build on x64.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D34318
llvm-svn: 305938
Summary:
After a single predecessor is merged into a basic block, we need to invalidate
the LVI information for the new merged block, when LVI is not provably true for
all of instructions in the new block.
The test cases added show the correct LVI information using the LVI printer
pass.
Reviewers: reames, dberlin, davide, sanjoy
Reviewed by: dberlin, davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34108
llvm-svn: 305699
This is a fix for PR33292 that shows a case of extremely long compilation
of a single .c file with clang, with most time spent within SCEV.
We have a mechanism of limiting recursion depth for getAddExpr to avoid
long analysis in SCEV. However, there are calls from getAddExpr to getMulExpr
and back that do not propagate the info about depth. As result of this, a chain
getAddExpr -> ... .> getAddExpr -> getMulExpr -> getAddExpr -> ... -> getAddExpr
can be extremely long, with every segment of getAddExpr's being up to max depth long.
This leads either to long compilation or crash by stack overflow. We face this situation while
analyzing big SCEVs in the test of PR33292.
This patch applies the same limit on max expression depth for getAddExpr and getMulExpr.
Differential Revision: https://reviews.llvm.org/D33984
llvm-svn: 305463
The zero heuristic assumes that integers are more likely positive than negative,
but this also has the effect of assuming that strcmp return values are more
likely positive than negative. Given that for nonzero strcmp return values it's
the ordering of arguments that determines the sign of the result there's no
reason to assume that's true.
Fix this by inspecting the LHS of the compare and using TargetLibraryInfo to
decide if it's strcmp-like, and if so only assume that nonzero is more likely
than zero i.e. strings are more often different than the same. This causes a
slight code generation change in the spec2006 benchmark 403.gcc, but with no
noticeable performance impact. The intent of this patch is to allow better
optimisation of dhrystone on Cortex-M cpus, but currently it won't as there are
also some changes that need to be made to if-conversion.
Differential Revision: https://reviews.llvm.org/D33934
llvm-svn: 304970
Summary:
LVIPrinter pass was previously relying on the LVICache. We now directly call the
the LVI functions which solves the value if the LVI information is not already
available in the cache. This has 2 benefits over the printing of LVI cache:
1. higher coverage (i.e. catches errors) in LVI code when cache value is
invalidated.
2. relies on the core functions, and not dependent on the LVI cache (which may
be scrapped at some point).
It would still catch any cache invalidation errors, since we first go through
the cache.
Reviewers: reames, dberlin, sanjoy
Reviewed by: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32135
llvm-svn: 304819
Thanks to Galina Kistanova for finding the missing break!
When trying to make a test for this, I realized our logic for handling
extractvalue/insertvalue/... is somewhat broken. This makes constructing
a test-case for this missing break nontrivial.
llvm-svn: 304275
The optimistic delinearization implemented in LLVM detects array sizes by
looking for non-linear products between parameters and induction variables.
In OpenCL code, such products often look like:
A[get_global_id(0) * N + get_global_id(1)]
Hence, the IV is hidden in the get_global_id() call and consequently
delinearization would fail as no induction variable is available that helps
us to identify N as array size parameter.
We now use a very simple heuristic to change this. We assume that each parameter
that comes directly from a function call is a hidden induction variable. As
a result, we can delinearize the access above to:
A[get_global_id(0)][get_global_id(1]
llvm-svn: 304073
Guozhi Wei