the recent refactoring. All interesting NetBSD release have a GNU as
version on i386 that supports --32, so don't bother with the conditional
setting of it.
llvm-svn: 149087
normalization. This used to be captured in DefaultTargetTriple and is
used for the (optional) $triple-$tool lookup for cross-compilation.
Do this properly by making it an attribute of the toolchain and use it
in combination with the computed triple as index for the toolchain
lookup.
llvm-svn: 149083
both actually tests what it wants to, doesn't have bogus and broken
assertions in it, and is also formatted much more cleanly and
consistently. Probably still some more that can be improved here, but
its much better.
Original commit message:
----
Try to unbreak the FreeBSD toolchain's detection of 32-bit targets
inside a 64-bit freebsd machine with the 32-bit compatibility layer
installed. The FreeBSD image always has the /usr/lib32 directory, so
test for the more concrete existence of crt1.o. Also enhance the tests
for freebsd to clarify what these trees look like and exercise the new
code.
Thanks to all the FreeBSD folks for helping me understand what caused
the failure and how we might fix it. =] That helps a lot. Also, yay
build bots.
llvm-svn: 149011
Original log:
Author: chandlerc <chandlerc@91177308-0d34-0410-b5e6-96231b3b80d8>
Date: Wed Jan 25 21:32:31 2012 +0000
Try to unbreak the FreeBSD toolchain's detection of 32-bit targets
inside a 64-bit freebsd machine with the 32-bit compatibility layer
installed. The FreeBSD image always has the /usr/lib32 directory, so
test for the more concrete existence of crt1.o. Also enhance the tests
for freebsd to clarify what these trees look like and exercise the new
code.
Thanks to all the FreeBSD folks for helping me understand what caused
the failure and how we might fix it. =] That helps a lot. Also, yay
build bots.
llvm-svn: 148993
inside a 64-bit freebsd machine with the 32-bit compatibility layer
installed. The FreeBSD image always has the /usr/lib32 directory, so
test for the more concrete existence of crt1.o. Also enhance the tests
for freebsd to clarify what these trees look like and exercise the new
code.
Thanks to all the FreeBSD folks for helping me understand what caused
the failure and how we might fix it. =] That helps a lot. Also, yay
build bots.
llvm-svn: 148981
Linux toolchain selection -- sorry folks. =] This should fix the Hexagon
toolchain.
However, I would point out that I see why my testing didn't catch this
-- we have no tests for Hexagon. ;]
llvm-svn: 148977
to suit the FreeBSD folks. Take them back to something closer to the old
behavior. We test whether the /usr/lib32 directory exists (within the
SysRoot), and use it if so, otherwise use /usr/lib.
FreeBSD folks, let me know if this causes any problems, or if you have
further tweaks.
llvm-svn: 148953
gross hack to provide it from my previous patch removing HostInfo. This
was enshrining (and hiding from my searches) the concept of storing and
diff-ing the host and target triples. We don't have the host triple
reliably available, so we need to merely inspect the target system. I've
changed the logic in selecting library search paths for NetBSD to match
what I provided for FreeBSD -- we include both search paths, but put the
32-bit-on-64-bit-host path first so it trumps.
NetBSD maintainers, you may want to tweak this, or feel free to ask me
to tweak it. I've left a FIXME here about the challeng I see in fixing
this properly.
llvm-svn: 148952
did anything. The two big pieces of functionality it tried to provide
was to cache the ToolChain objects for each target, and to figure out
the exact target based on the flag set coming in to an invocation.
However, it had a lot of flaws even with those goals:
- Neither of these have anything to do with the host, or its info.
- The HostInfo class was setup as a full blown class *hierarchy* with
a separate implementation for each "host" OS. This required
dispatching just to create the objects in the first place.
- The hierarchy claimed to represent the host, when in fact it was
based on the target OS.
- Each leaf in the hierarchy was responsible for implementing the flag
processing and caching, resulting in a *lot* of copy-paste code and
quite a few bugs.
- The caching was consistently done based on architecture alone, even
though *any* aspect of the targeted triple might change the behavior
of the configured toolchain.
- Flag processing was already being done in the Driver proper,
separating the flag handling even more than it already is.
Instead of this, we can simply have the dispatch logic in the Driver
which previously created a HostInfo object create the ToolChain objects.
Adding caching in the Driver layer is a tiny amount of code. Finally,
pulling the flag processing into the Driver puts it where it belongs and
consolidates it in one location.
The result is that two functions, and maybe 100 lines of new code
replace over 10 classes and 800 lines of code. Woot.
This also paves the way to introduce more detailed ToolChain objects for
various OSes without threading through a new HostInfo type as well, and
the accompanying boiler plate. That, of course, was the yak I started to
shave that began this entire refactoring escapade. Wheee!
llvm-svn: 148950
a HostInfo reference. Nothing about the HostInfo was used by any
toolchain except digging out the driver from it. This just makes that
a lot more direct. The change was accomplished entirely mechanically.
It's one step closer to removing the shim full of buggy copy/paste code
that is HostInfo.
llvm-svn: 148945
helped stage the refactoring of things a bit, but really isn't the right
place for it. The driver may be responsible for compilations with many
different targets. In those cases, having a target triple in the driver
is actively misleading because for many of those compilations that is
not actually the triple being targeted.
This moves the last remaining users of the Driver's target triple to
instead use the ToolChain's target triple. The toolchain has a single,
concrete target it operates over, making this a more stable and natural
home for it.
llvm-svn: 148942
adding search paths. Add them only when they exist, and prefix the paths
with the sysroot. This will allow targeting a FreeBSD sysroot on
a non-FreeBSD host machine, and perhaps more importantly should allow
testing the FreeBSD driver's behavior similarly to the Linux tests with
a fake tree of files in the regression test suite.
I don't have FreeBSD systems handy to build up the list of files that
should be used here, but this is the basic functionality and I'm hoping
Roman or someone from the community can contribute the actual test
cases.
llvm-svn: 148940
search paths for 32-bit targets. This avoids having to detect which is
expected for the target system, and the linker should DTRT, and take the
32-bit libraries from the first one when applicable. Thanks to Roman
Divacky for sanity checking this.
llvm-svn: 148939
The fundamental shift here is to stop making *any* assumptions about the
*host* triple. Where these assumptions you ask? Why, they were in one of
the two target triples referenced of course. This was the single biggest
place where the previously named "host triple" was actually used as
such. ;] The reason we were reasoning about the host is in order to
detect the use of '-m32' or '-m64' flags to change the target. These
flags shift the default target only slightly, which typically means
a slight deviation from the host. When using these flags, the GCC
installation is under a different triple from the one actually targeted
in the compilation, and we used the host triple to find it.
Too bad that wasn't even correct. Consider an x86 Linux host which has
a PPC64 cross-compiling GCC toolchain installed. This toolchain is also
configured for multiarch compiling and can target PPC32 with eth '-m32'
flag. When targeting 'powerpc-linux-gnu' or some other PPC32 triple, we
have to look for the PPC64 variant of the triple to find the GCC
install, and that triple is neither the host nor target.
The new logic computes the multiarch's alternate triple from the target
triple, and looks under both sides. It also looks more aggressively for
the correct subdirectory of the GCC installation, and exposes the
subdirectory in a nice programmatic way. This '/32' or '/64' suffix is
something we can reuse in many other parts of the toolchain.
An important note -- while this likely fixes a large category of
cross-compile use cases, that's not my primary goal, and I've not done
testing (or added test cases) for scenarios that may now work. If
someone else wants to try more interesting PPC cross compiles, I'd love
to have reports. But my focus is on factoring away the references to the
"host" triple. The refactoring is my goal, and so I'm mostly relying on
the existing (pretty good) test coverage we have here.
Future patches will leverage this new functionality to factor out more
and more of the toolchain's triple manipulation.
llvm-svn: 148935
of the target triple to stand in for the "host" triple.
Thanks to a great conversation with Richard Smith, I'm now much more
confident in how this is proceeding. In all of the places where we
currently reason about the "host" architecture or triple, what we really
want to reason about in the detected GCC installation architecture or
triple, and the ways in which that differs from the target. When we find
a GCC installation with a different triple from our target *but capable
of targeting our target* through an option such as '-m64', we want to
detect *that* case and change the paths within the GCC installation (and
libstdc++ installation) to reflect this difference.
This patch makes one function do this correctly. Subsequent commits will
hoist the logic used here into the GCCInstallation utility, and then
reuse it through the rest of the toolchains to fix the remaining places
where this is currently happening.
llvm-svn: 148852
inside of GCCInstallation to be a proper llvm::Triple. This is still
a touch ugly because we have to use it as a string in so many places,
but I think on the whole the more structured representation is better.
Comments of course welcome if this tradeoff isn't working for folks.
llvm-svn: 148843
function. The logic for this, and I want to emphasize that this is the
logic for computing the *target* triple, is currently scattered
throughout various different HostInfo classes ToolChain factoring
functions. Best part, it is largely *duplicated* there. The goal is to
hoist all of that up to here where we can deal with it once, and in
a consistent manner.
Unfortunately, this uncovers more fun problems: the ToolChains assume
that the *actual* target triple is the one passed into them by these
factory functions, while the *host* triple is the one in the driver.
This already was a lie, and a damn lie, when the '-target' flag was
specified. It only really worked when the difference stemmed from '-m32'
and '-m64' flags. I'll have to fix that (and remove all the FIXMEs I've
introduced here to document the problem) before I can finish hoisting
the target-calculation logic.
It's bugs all the way down today it seems...
llvm-svn: 148839
inside the innards of the Driver implementation, and only ever
implemented to return 'true' for the Darwin OSes. Instead use a more
direct query on the target triple and a comment to document why the
target matters here.
If anyone is worried about this predicate getting wider use or improper
use, I can make it a local or private predicate in the driver.
llvm-svn: 148797
The Driver has a fixed target, whether we like it or not, the
DefaultTargetTriple is not a default. This at least makes things more
honest. I'll eventually get rid of most (if not all) of
DefaultTargetTriple with this proper triple object. Bit of a WIP.
llvm-svn: 148796
Patch from Jyotsna Verma:
I have made the changes to remove assertions in the Hexagon backend
specific clang driver. Instead of asserting on invalid arch name, it has
been modified to use the default value.
I have changed the implementation of the CPU flag validation for the
Hexagon backend. Earlier, the clang driver performed the check and
asserted on invalid inputs. In the new implementation, the driver passes
the last CPU flag (or sets to "v4" if not specified) to the compiler (and
also to the assembler and linker which perform their own check) instead of
asserting on incorrect values. This patch changes the setCPU function for
the Hexagon backend in clang/lib/Basic/Targets.cpp which causes the
compiler to error out on incorrect CPU flag values.
llvm-svn: 148139
- Support gcc-compatible vfpv3 name in addition to vfp3.
- Support vfpv3-d16.
- Disable neon feature for -mfpu=vfp* (yes, we were emitting Neon instructions
for those!).
llvm-svn: 147943
for the arm-linux-androideabi triple in particular.
Also use this to do a better job of selecting soft FP settings.
Patch by Evgeniy Stepanov.
llvm-svn: 147872
source file. Otherwise -g -save-temps will error out on the compile
of any .c file.
Fixes about 4000 of the errors in the clang-tests gdb test suite.
llvm-svn: 147819
Joerg Sonnenberger