to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
The version of make_absolute which accepted a specific directory to use
as the "base" for the computation could never fail, even though it
returned a std::error_code. The reason for that seems to be historical
-- the CWD flavour (which can fail due to failure to retrieve CWD) was
there first, and the new version was implemented by extending that.
This removes the error return value from the non-CWD overload and
reimplements the CWD version on top of that. This enables us to remove
some dead code where people were pessimistically trying to handle the
errors returned from this function.
Reviewers: zturner, sammccall
Subscribers: hiraditya, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D56599
llvm-svn: 351317
On AIX, attempting (without root) to set the sticky bit on a file with
the `chmod` utility will give:
```
chmod: not all requested changes were made to <file>
```
The same occurs when modifying other permission bits on a file with the
sticky bit already set.
It seems that the `chmod` function will report success despite failing
to set the sticky bit.
llvm-svn: 350735
The `expandTildeExpr` routine just replaces a tilde by a home dir path.
If the home dir has a trailing slash, the result of substitution will
contain double slashes. For example, `HOME=/foo/ ~/bar` gives `/foo//bar`.
That corresponds to (at least) Bash behaviour because the following
command `$HOME=/foo/ echo ~/bar` prints `/foo//bar`.
The `ExpandTilde` test constructs a path expected as the `fs::expand_tilde`
call result by calling `path::append` and the expected path has a single
slash. This patch fixes that and allows to pass the unittest on hosts where
the `HOME` is `/`.
Differential Revision: http://reviews.llvm.org/D54752
llvm-svn: 347346
In D54435 there was some discussion about the expand_tilde flag for
real_path that I wanted to expose through the VFS. The consensus is that
these two things should be separate functions. Since we already have the
code for this I went ahead and added a function expand_tilde that does
just that.
Differential revision: https://reviews.llvm.org/D54448
llvm-svn: 346776
Summary:
Reporting this as an error required stat()ing every file, as well as seeming
semantically questionable.
Reviewers: vsk, bkramer
Subscribers: mgrang, kristina, llvm-commits, liaoyuke
Differential Revision: https://reviews.llvm.org/D52648
llvm-svn: 343460
Summary:
Add an overload to sys::fs::setLastModificationAndAccessTime that allows setting last access and modification times separately. This will allow tools to use this API when they want to preserve both the access and modification times from an input file, which may be different.
Also note that both the POSIX (futimens/futimes) and Windows (SetFileTime) APIs take the two timestamps in the order of (1) access (2) modification time, so this renames the method to "setLastAccessAndModificationTime" to make it clear which timestamp is which.
For existing callers, the 1-arg overload just sets both timestamps to the same thing.
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50521
llvm-svn: 339628
Summary:
On Windows, TempFile::create() was prone to failing with permission
denied errors when a process created many tempfiles without providing
a model large enough to accommodate them. There was also a problem
with createUniqueEntity getting into an infinite loop when all names
permitted by the model are in use. This change fixes both of these
problems and adds a unit test for them.
Reviewers: pcc, rnk, zturner
Reviewed By: zturner
Subscribers: inglorion, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D50126
llvm-svn: 338745
This breaks the OpenFlags enumeration into two separate
enumerations: OpenFlags and CreationDisposition. The first
controls the behavior of the API depending on whether or not
the target file already exists, and is not a flags-based
enum. The second controls more flags-like values.
This yields a more easy to understand API, while also allowing
flags to be passed to the openForRead api, where most of the
values didn't make sense before. This also makes the apis more
testable as it becomes easy to enumerate all the configurations
which make sense, so I've added many new tests to exercise all
the different values.
llvm-svn: 334221
Summary:
Various path functions were not treating paths consisting of slashes
alone consistently. For example, the iterator-based accessors decomposed the
path "///" into two elements: "/" and ".". This is not too bad, but it
is different from the behavior specified by posix:
```
A pathname that contains ***at least one non-slash character*** and that
ends with one or more trailing slashes shall be resolved as if a single
dot character ( '.' ) were appended to the pathname.
```
More importantly, this was different from how we treated the same path
in the filename+parent_path functions, which decomposed this path into
"." and "". This was completely wrong as it lost the information that
this was an absolute path which referred to the root directory.
This patch fixes this behavior by making sure all functions treat paths
consisting of (back)slashes alone the same way as "/". I.e., the
iterator-based functions will just report one component ("/"), and the
filename+parent_path will decompose them into "/" and "".
A slightly controversial topic here may be the treatment of "//". Posix
says that paths beginning with "//" may have special meaning and indeed
we have code which parses paths like "//net/foo/bar" specially. However,
as we were already not being consistent in parsing the "//" string
alone, and any special parsing for it would complicate the code further,
I chose to treat it the same way as longer sequences of slashes (which
are guaranteed to be the same as "/").
Another slight change of behavior is in the parsing of paths like
"//net//". Previously the last component of this path was ".". However,
as in our parsing the "//net" part in this path was the same as the
"drive" part in "c:\" and the next slash was the "root directory", it
made sense to treat "//net//" the same way as "//net/" (i.e., not to add
the extra "." component at the end).
Reviewers: zturner, rnk, dblaikie, Bigcheese
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45942
llvm-svn: 331876
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
LLVM_ON_WIN32 is set exactly with MSVC and MinGW (but not Cygwin) in
HandleLLVMOptions.cmake, which is where _WIN32 defined too. Just use the
default macro instead of a reinvented one.
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
No intended behavior change.
This moves over all uses of the macro, but doesn't remove the definition
of it in (llvm-)config.h yet.
llvm-svn: 331127
Summary:
I am preparing a patch to the path function. While working on it, I
noticed that some of the areas are lacking test coverage (e.g. filename
and parent_path functions), so I add more tests to guard against
regressions there.
I have also found the failure messages hard to understand, so I rewrote
some existing test to give more actionable messages when they fail:
- for tests which run over multiple inputs, I use SCOPED_TRACE, to show
which of the inputs caused the actual failure.
- for comparisons of vectors, I use gmock's container matchers, which
will print out the full container contents (and the elements that
differ) when they fail to match.
Reviewers: zturner, espindola
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45941
llvm-svn: 330691
r327219 added wrappers to std::sort which randomly shuffle the container before
sorting. This will help in uncovering non-determinism caused due to undefined
sorting order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of
std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to
llvm::sort. Refer the comments section in D44363 for a list of all the
required patches.
llvm-svn: 329475
Summary:
Previous code hangs indefinitely when trying to iterate through a
symbol link file that points to an non-exist directory. This change
fixes the bug to make the addCollectedPath function exit ealier and
print out correct warning messages.
Patch by Yuke Liao (@liaoyuke).
Reviewers: Dor1s, vsk
Reviewed By: vsk
Subscribers: bruno, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D44960
llvm-svn: 329338
We already allowed keep+discard. It is important to be able to discard
a temporary if a rename fail. It is also convenient as it allows the
use of RAII for discarding.
Allow discarding twice for similar reasons.
llvm-svn: 318867
This allows clients to avoid an unnecessary fs::status() call on each
directory entry. Because the information returned by FindFirstFileEx
is a subset of the information returned by a regular status() call,
I needed to extract a base class from file_status that contains only
that information.
On my machine, this reduces the time required to enumerate a ThinLTO
cache directory containing 520k files from almost 4 minutes to less
than 2 seconds.
Differential Revision: https://reviews.llvm.org/D38716
llvm-svn: 315378
Summary:
The function widenPath() for Windows also normalizes long path names by
iterating over the path's components and calling append(). The
assumption during the iteration that separators are not returned by the
iterator doesn't hold because the iterators do return a separator when
the path has a drive name. Handle this case by ignoring separators
during iteration.
Reviewers: rnk
Subscribers: danalbert, srhines
Differential Revision: https://reviews.llvm.org/D36752
llvm-svn: 311382
Summary:
It was added to support clang warnings about includes with case
mismatches, but it ended up not being necessary.
Reviewers: twoh, rafael
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D36328
llvm-svn: 310078
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
clang-format (https://reviews.llvm.org/D33932) to keep primary headers
at the top and handle new utility headers like 'gmock' consistently with
other utility headers.
No other change was made. I did no manual edits, all of this is
clang-format.
This should allow other changes to have more clear and focused diffs,
and is especially motivated by moving some headers into more focused
libraries.
llvm-svn: 304786
Summary: In rL297945, jhenderson added methods for setting permissions
to sys::fs, but some of the unittests that attempt to set sticky bits
(01000) on files fail on modern BSDs, such as FreeBSD, NetBSD and
OpenBSD. This is because those systems do not allow regular users to
set sticky bits on files, only on directories. Fix it by disabling
these particular tests on modern BSDs.
Reviewers: emaste, brad, jhenderson
Reviewed By: jhenderson
Subscribers: joerg, krytarowski, llvm-commits
Differential Revision: https://reviews.llvm.org/D32120
llvm-svn: 301220
It's possible (albeit strange) for $HOME to intentionally
point somewhere other than the user's home directory as
reported by the password database. Our test shouldn't fail
in this case. This patch updates the test to pull directly
from the password database before unsetting $HOME, rather
than comparing the return value of home_directory() to the
original value of the environment variable.
llvm-svn: 298514
This is something of an edge case, but when the $HOME environment
variable is not set, we can still look in the password database
to get the current user's home directory.
Added a test for this by getting the value of $HOME, then unsetting
it, then calling home_directory() and verifying that it succeeds
and that the value is the same as what we originally read from
the environment.
llvm-svn: 298513
In doing so, clean up the MD5 interface a little. Most
existing users only care about the lower 8 bytes of an MD5,
but for some users that care about the upper and lower,
there wasn't a good interface. Furthermore, consumers
of the MD5 checksum were required to handle endianness
details on their own, so it seems reasonable to abstract
this into a nicer interface that just gives you the right
value.
Differential Revision: https://reviews.llvm.org/D31105
llvm-svn: 298322
Previously which path syntax we supported dependend on what
platform we were compiling LLVM on. While this is normally
desirable, there are situations where we need to be able to
handle a path that we know was generated on a remote host.
Remote debugging, for example, or parsing debug info.
99% of the code in LLVM for handling paths was platform
agnostic and literally just a few branches were gated behind
pre-processor checks, so this changes those sites to use
runtime checks instead, and adds a flag to every path
API that allows one to override the host native syntax.
Differential Revision: https://reviews.llvm.org/D30858
llvm-svn: 298004
This change adds support for functions to set and get file permissions, in a similar manner to the C++17 permissions() function in <filesystem>. The setter uses chmod on Unix systems and SetFileAttributes on Windows, setting the permissions as passed in. The getter simply uses the existing status() function.
Prior to this change, status() would always return an unknown value for the permissions on a Windows file, making it impossible to test the new function on Windows. I have therefore added support for this as well. On Linux, prior to this change, the permissions included the file type, which should actually be accessed via a different member of the file_status class.
Note that on Windows, only the *_write permission bits have any affect - if any are set, the file is writable, and if not, the file is read-only. This is in common with what MSDN describes for their behaviour of std::filesystem::permissions(), and also what boost::filesystem does.
The motivation behind this change is so that we can easily test behaviour on read-only files in LLVM unit tests, but I am sure that others may find it useful in some situations.
Reviewers: zturner, amccarth, aaron.ballman
Differential Revision: https://reviews.llvm.org/D30736
llvm-svn: 297945
This commit adds a unit test to the file system tests to verify the behavior of
the directory iterator and recursive directory iterator with broken symlinks.
This test is Unix only.
llvm-svn: 297669
LLVM already has real_path like functionality, but it is
cumbersome to use and involves clean up after (e.g. you have
to call openFileForRead, then close the resulting FD).
Furthermore, on Windows it doesn't work for directories since
opening a directory and opening a file require slightly
different flags.
So I add a simple function `real_path` which works for all
paths on all platforms and has a simple to use interface.
In doing so, I add the ability to opt in to resolving tilde
expressions (e.g. ~/foo), which are normally handled by
the shell.
Differential Revision: https://reviews.llvm.org/D30668
llvm-svn: 297483
We already have a function create_directories() which can create
an entire tree, and remove() which can remove an empty directory,
but we do not have remove_directories() which can remove an entire
tree. This patch adds such a function.
Because removing a directory tree can have dangerous consequences
when the tree contains a directory symlink, the patch here updates
the existing directory_iterator construct to optionally not follow
symlinks (previously it would always follow symlinks). The delete
algorithm uses this flag so that for symlinks, only the links are
removed, and not the targets.
On Windows this is implemented with SHFileOperation, which also
does not recurse into symbolic links or junctions.
Differential Revision: https://reviews.llvm.org/D30676
llvm-svn: 297314
rL295768 introduced this test that fails if LLVM is built and tested on
an NFS share. Delete the test as discussed on the corresponing commit
thread. The only feasible solution would have been to introduce
environment variables and to en/disable the test conditionally.
llvm-svn: 297260
Windows does not treat `~` as a reference to home directory, so the call
to `llvm::sys::path::native` on, say, `~/somedir` produces `~\somedir`,
which has different meaning than the original path. With this change
tilde is expanded on Windows to user profile directory. Such behavior
keeps original meaning of the path and is consistent with the algorithm
of `llvm::sys::path::home_directory`.
Differential Revision: https://reviews.llvm.org/D27527
llvm-svn: 296590
Chandler Carruth