Summary:
This removes the hard limit on the number of loaded modules (used to be
16K), and makes it easier to use LoadedModules w/o causing a memory
leak: ListOfModules owns the modules, and makes sure to properly clean
them in destructor.
Remove filtering functionality that is only needed in one place (LSan).
Reviewers: aizatsky
Subscribers: llvm-commits, kcc
Differential Revision: http://reviews.llvm.org/D17470
llvm-svn: 261554
There seems to be a difference between 2.12.1 and 2.12.2 in 64-bit build.
Tested on Scientific Linux 6.6, based on RHEL.
Differential Revision: http://reviews.llvm.org/D17190
llvm-svn: 261193
Log all of sanitizers' output (not just ASan bug reports) to CrashReport,
which simplifies diagnosing failed checks as well as other errors. This
also allows to strip the color sequences early from the printed buffer,
which is more efficient than what we had perviously.
Differential Revision: http://reviews.llvm.org/D15396
llvm-svn: 256988
When ASan currently detects a bug, by default it will only print out the text
of the report to stderr. This patch changes this behavior and writes the full
text of the report to syslog before we terminate the process. It also calls
os_trace (Activity Tracing available on OS X and iOS) with a message saying
that the report is available in syslog. This is useful, because this message
will be shown in the crash log.
For this to work, the patch makes sure we store the full report into
error_message_buffer unconditionally, and it also strips out ANSI escape
sequences from the report (they are used when producing colored reports).
I've initially tried to log to syslog during printing, which is done on Android
right now. The advantage is that if we crash during error reporting or the
produced error does not go through ScopedInErrorReport, we would still get a
(partial) message in the syslog. However, that solution is very problematic on
OS X. One issue is that the logging routine uses GCD, which may spawn a new
thread on its behalf. In many cases, the reporting logic locks threadRegistry,
which leads to deadlocks.
Reviewed at http://reviews.llvm.org/D13452
(In addition, add sanitizer_common_libcdep.cc to buildgo.sh to avoid
build failures on Linux.)
llvm-svn: 253688
Summary: This is enough to get the asan static_tls.cc test case working.
Reviewers: eugenis, samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14574
llvm-svn: 252738
This patch moves a few functions from `sanitizer_linux_libcdep.cc` to `sanitizer_posix_libcdep.cc` in order to use them on OS X as well. Plus a few more small build fixes.
This is part of an effort to port TSan to OS X, and it's one the very first steps. Don't expect TSan on OS X to actually work or pass tests at this point.
Differential Revision: http://reviews.llvm.org/D14235
llvm-svn: 251918
When ASan currently detects a bug, by default it will only print out the text
of the report to stderr. This patch changes this behavior and writes the full
text of the report to syslog before we terminate the process. It also calls
os_trace (Activity Tracing available on OS X and iOS) with a message saying
that the report is available in syslog. This is useful, because this message
will be shown in the crash log.
For this to work, the patch makes sure we store the full report into
error_message_buffer unconditionally, and it also strips out ANSI escape
sequences from the report (they are used when producing colored reports).
I've initially tried to log to syslog during printing, which is done on Android
right now. The advantage is that if we crash during error reporting or the
produced error does not go through ScopedInErrorReport, we would still get a
(partial) message in the syslog. However, that solution is very problematic on
OS X. One issue is that the logging routine uses GCD, which may spawn a new
thread on its behalf. In many cases, the reporting logic locks threadRegistry,
which leads to deadlocks.
Reviewed at http://reviews.llvm.org/D13452
(In addition, add sanitizer_common_libcdep.cc to buildgo.sh to avoid
build failures on Linux.)
llvm-svn: 251577
When ASan currently detects a bug, by default it will only print out the text
of the report to stderr. This patch changes this behavior and writes the full
text of the report to syslog before we terminate the process. It also calls
os_trace (Activity Tracing available on OS X and iOS) with a message saying
that the report is available in syslog. This is useful, because this message
will be shown in the crash log.
For this to work, the patch makes sure we store the full report into
error_message_buffer unconditionally, and it also strips out ANSI escape
sequences from the report (they are used when producing colored reports).
I've initially tried to log to syslog during printing, which is done on Android
right now. The advantage is that if we crash during error reporting or the
produced error does not go through ScopedInErrorReport, we would still get a
(partial) message in the syslog. However, that solution is very problematic on
OS X. One issue is that the logging routine uses GCD, which may spawn a new
thread on its behalf. In many cases, the reporting logic locks threadRegistry,
which leads to deadlocks.
Reviewed at http://reviews.llvm.org/D13452
llvm-svn: 251447
- Trim spaces.
- Use nullptr in place of 0 for pointer variables.
- Use '!p' in place of 'p == 0' for null pointer checks.
Patch by Eugene Zelenko!
Differential Revision: http://reviews.llvm.org/D13310
llvm-svn: 248964
Due to a slightly different initialization order, syslog on
android/x86 calls vsnprintf, which can not be handled until interceptors
are initialized at least.
llvm-svn: 246831
This patch fix the function GetTls for aarch64, where it assumes it
follows the x86_64 way where the TLS initial address is at the end
of TLS. Instead aarch64 set the TLS address as the thread pointer.
llvm-svn: 246148
This patch enabled TSAN for aarch64 with 39-bit VMA layout. As defined by
tsan_platform.h the layout used is:
0000 4000 00 - 0200 0000 00: main binary
2000 0000 00 - 4000 0000 00: shadow memory
4000 0000 00 - 5000 0000 00: metainfo
5000 0000 00 - 6000 0000 00: -
6000 0000 00 - 6200 0000 00: traces
6200 0000 00 - 7d00 0000 00: -
7d00 0000 00 - 7e00 0000 00: heap
7e00 0000 00 - 7fff ffff ff: modules and main thread stack
Which gives it about 8GB for main binary, 4GB for heap and 8GB for
modules and main thread stack.
Most of tests are passing, with the exception of:
* ignore_lib0, ignore_lib1, ignore_lib3 due a kernel limitation for
no support to make mmap page non-executable.
* longjmp tests due missing specialized assembly routines.
These tests are xfail for now.
The only tsan issue still showing is:
rtl/TsanRtlTest/Posix.ThreadLocalAccesses
Which still required further investigation. The test is disable for
aarch64 for now.
llvm-svn: 244055
Previously, Android target had a logic of duplicating all sanitizer
output to logcat. This change extends it to all posix platforms via
the use of syslog, controlled by log_to_syslog flag. Enabled by
default on Android, off everywhere else.
A bit of cmake magic is required to allow Printf() to call a libc
function. I'm adding a stub implementation to support no-libc builds
like dfsan and safestack.
This is a second attempt. I believe I've fixed all the issues that
prompted the revert: Mac build, and all kinds of non-CMake builds
(there are 3 of those).
llvm-svn: 243051
which caches the executable name upon the first invocation.
This is necessary because Google Chrome (and potentially other programs)
restrict the access to /proc/self/exe on linux.
This change should fix https://code.google.com/p/chromium/issues/detail?id=502974
llvm-svn: 240960
dl_iterate_phdr is somewhat broken in L (see the code for details).
We add runtime OS version detection and fallback to /proc/maps on L or earlier.
This fixes a number of ASan tests on L.
llvm-svn: 236628
This CL:
- moves PrepareForSandboxing() to sanitizer_posix_libcdep.cc
- fixes the coverage tests to use flag substitutions defined in r233802 and not rely on hardcoded shared library names
- moves those tests to TestCases/Posix so that they can be executed on Darwin
llvm-svn: 233828
MSanDR is a dynamic instrumentation tool that can instrument the code
(prebuilt libraries and such) that could not be instrumented at compile time.
This code is unused (to the best of our knowledge) and unmaintained, and
starting to bit-rot.
llvm-svn: 222232
We may as well just use Symbolizer::GetOrInit() in all the cases.
Don't call Symbolizer::Get() early in tools initialization: these days
it doesn't do any important setup work, and we may as well create the
symbolizer the first time it's actually needed.
llvm-svn: 217558
Marcin Koscielnicki