GCC 11 will define this macro.
In LLVM, the feature flag only applies to 64-bit mode and we always define the
macro in 32-bit mode. This is different from GCC -m32 in which -mno-sahf can
suppress the macro. The discrepancy can unlikely cause trouble.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D89198
At AMD, in an internal audit of our code, we found some corner cases
where we were not quite differentiating targets enough for some old
hardware. This commit is part of fixing that by adding three new
targets:
* The "Oland" and "Hainan" variants of gfx601 are now split out into
gfx602. LLPC (in the GPUOpen driver) and other front-ends could use
that to avoid using the shaderZExport workaround on gfx602.
* One variant of gfx703 is now split out into gfx705. LLPC and other
front-ends could use that to avoid using the
shaderSpiCsRegAllocFragmentation workaround on gfx705.
* The "TongaPro" variant of gfx802 is now split out into gfx805.
TongaPro has a faster 64-bit shift than its former friends in gfx802,
and a subtarget feature could be set up for that to take advantage of
it. This commit does not make that change; it just adds the target.
V2: Add clang changes. Put TargetParser list in order.
V3: AMDGCNGPUs table in TargetParser.cpp needs to be in GPUKind order,
so fix the GPUKind order.
Differential Revision: https://reviews.llvm.org/D88916
Change-Id: Ia901a7157eb2f73ccd9f25dbacec38427312377d
Set the default alignment control variables for z/OS target and add test case for alignment rules on z/OS.
Reviewed By: abhina.sreeskantharajan
Differential Revision: https://reviews.llvm.org/D88845
Currently CUDA/HIP toolchain uses "unknown" as bound arch
for offload action for fat binary. This causes -mcpu or -march
with "unknown" added in HIPToolChain::TranslateArgs or
CUDAToolChain::TranslateArgs.
This causes issue for https://reviews.llvm.org/D88377 since
HIP toolchain needs to check -mcpu in HIPToolChain::TranslateArgs.
The bound arch of offload action for fat binary is not really
used, therefore set it to CudaArch::UNUSED.
Differential Revision: https://reviews.llvm.org/D88524
This adds support for -mcpu=cortex-r82. Some more information about this
core can be found here:
https://www.arm.com/products/silicon-ip-cpu/cortex-r/cortex-r82
One note about the system register: that is a bit of a refactoring because of
small differences between v8.4-A AArch64 and v8-R AArch64.
This is based on patches from Mark Murray and Mikhail Maltsev.
Differential Revision: https://reviews.llvm.org/D88660
Key Locker provides a mechanism to encrypt and decrypt data with an AES key without having access
to the raw key value by converting AES keys into “handles”. These handles can be used to perform the
same encryption and decryption operations as the original AES keys, but they only work on the current
system and only until they are revoked. If software revokes Key Locker handles (e.g., on a reboot),
then any previous handles can no longer be used.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D88398
This patch legalizes the v256i1 and v512i1 types that will be used for MMA.
It implements loads and stores of these types.
v256i1 is a pair of VSX registers, so for this type, we load/store the two
underlying registers. v512i1 is used for MMA accumulators. So in addition to
loading and storing the 4 associated VSX registers, we generate instructions to
prime (copy the VSX registers to the accumulator) after loading and unprime
(copy the accumulator back to the VSX registers) before storing.
This patch also adds the UACC register class that is necessary to implement the
loads and stores. This class represents accumulator in their unprimed form and
allow the distinction between primed and unprimed accumulators to avoid invalid
copies of the VSX registers associated with primed accumulators.
Differential Revision: https://reviews.llvm.org/D84968
This reverts commit 8e780a1653.
DiagnosticBuilder is a value type, created on the stack everywhere. IMO
we should not be adding a vtable to it, and making very operator<< use a
virtual interface. There are other feasible designs for implementing
this. The original review, D84362, was approved by @tra, who is
responsible for Clang's CUDA support, but it wasn't reviewed by @rsmith
or anyone responsible for clang's diagnostic library.
Using a pointer for the description string in StaticDiagInfoRec causes
several problems:
1. We don't need to use a whole pointer to represent the string;
2. The use of pointers incurs runtime relocations for those pointers;
the relocations take up space on disk and represent runtime overhead;
3. The need to relocate data implies that, on some platforms, the entire
array containing StaticDiagInfoRecs cannot be shared between processes.
This patch changes the storage scheme for the diagnostic descriptions to
avoid these problems. We instead generate (effectively) one large
string and then StaticDiagInfoRec conceptually holds offsets into the
string. We elected to also move the storage of those offsets into a
separate array to further reduce the space required.
On x86-64 Linux, this change removes about 120KB of relocations and
moves about 60KB from the non-shareable .data.rel.ro section to
shareable .rodata. (The array is about 80KB before this, but we
eliminated 4 bytes/entry by using offsets rather than pointers.) We
actually reap this benefit twice, because these tables show up in both
libclang.so and libclang-cpp.so and we get the reduction in both places.
Differential Revision: https://reviews.llvm.org/D81865
This recommits 829d14ee0a.
The patch was reverted due to a regression in some CUDA app
which was thought to be caused by this patch. However, investigation
showed that the regression was due to some other issues, therefore
recommit this patch.
Set the default wchar_t type on z/OS, and unsigned as the default.
Reviewed By: hubert.reinterpretcast, fanbo-meng
Differential Revision: https://reviews.llvm.org/D87624
In CUDA/HIP a function may become implicit host device function by
pragma or constexpr. A host device function is checked in both
host and device compilation. However it may be emitted only
on host or device side, therefore the diagnostics should be
deferred until it is known to be emitted.
Currently clang is only able to defer certain diagnostics. This causes
false alarms and limits the usefulness of host device functions.
This patch lets clang defer all overloading resolution diagnostics for host device functions.
An option -fgpu-defer-diag is added to control this behavior. By default
it is off.
It is NFC for other languages.
Differential Revision: https://reviews.llvm.org/D84364
PartialDiagnostic misses some functions compared to DiagnosticBuilder.
This patch refactors DiagnosticBuilder and PartialDiagnostic, extracts
the common functionality so that the streaming << operators are
shared.
Differential Revision: https://reviews.llvm.org/D84362
Aligned allocation is not supported on z/OS. This patch sets -faligned-alloc-unavailable as default in z/OS toolchain.
Reviewed By: abhina.sreeskantharajan, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D87611
d4ce862f introduced HasStrictFP to disable generating constrained FP
operations for platforms lacking support. Since work for enabling
constrained FP on PowerPC is almost done, we'd like to enable it.
Reviewed By: kpn, steven.zhang
Differential Revision: https://reviews.llvm.org/D87223
As reported in Bug 42535, `clang` doesn't inline atomic ops on 32-bit
Sparc, unlike `gcc` on Solaris. In a 1-stage build with `gcc`, only two
testcases are affected (currently `XFAIL`ed), while in a 2-stage build more
than 100 tests `FAIL` due to this issue.
The reason for this `gcc`/`clang` difference is that `gcc` on 32-bit
Solaris/SPARC defaults to `-mpcu=v9` where atomic ops are supported, unlike
with `clang`'s default of `-mcpu=v8`. This patch changes `clang` to use
`-mcpu=v9` on 32-bit Solaris/SPARC, too.
Doing so uncovered two bugs:
`clang -m32 -mcpu=v9` chokes with any Solaris system headers included:
/usr/include/sys/isa_defs.h:461:2: error: "Both _ILP32 and _LP64 are defined"
#error "Both _ILP32 and _LP64 are defined"
While `clang` currently defines `__sparcv9` in a 32-bit `-mcpu=v9`
compilation, neither `gcc` nor Studio `cc` do. In fact, the Studio 12.6
`cc(1)` man page clearly states:
These predefinitions are valid in all modes:
[...]
__sparcv8 (SPARC)
__sparcv9 (SPARC -m64)
At the same time, the patch defines `__GCC_HAVE_SYNC_COMPARE_AND_SWAP_[1248]`
for a 32-bit Sparc compilation with any V9 cpu. I've also changed
`MaxAtomicInlineWidth` for V9, matching what `gcc` does and the Oracle
Developer Studio 12.6: C User's Guide documents (Ch. 3, Support for Atomic
Types, 3.1 Size and Alignment of Atomic C Types).
The two testcases that had been `XFAIL`ed for Bug 42535 are un-`XFAIL`ed
again.
Tested on `sparcv9-sun-solaris2.11` and `amd64-pc-solaris2.11`.
Differential Revision: https://reviews.llvm.org/D86621
The __ARM_FEATURE_SVE_BITS feature macro is specified in the Arm C
Language Extensions (ACLE) for SVE [1] (version 00bet5). From the spec,
where __ARM_FEATURE_SVE_BITS==N:
When N is nonzero, indicates that the implementation is generating
code for an N-bit SVE target and that the arm_sve_vector_bits(N)
attribute is available.
This was defined in D83550 as __ARM_FEATURE_SVE_BITS_EXPERIMENTAL and
enabled under the -msve-vector-bits flag to simplify initial tests.
This patch drops _EXPERIMENTAL now there is support for the feature.
[1] https://developer.arm.com/documentation/100987/latest
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D86720
Once the new option parsing system is committed, this will allow to generate a
check to ensure that correct command line generation happens
Differential Revision: https://reviews.llvm.org/D86290
As a prerequisite to doing experimental buids of pieces of FreeBSD PowerPC64 as little-endian, allow actually targeting it.
This is needed so basic platform definitions are pulled in. Without it, the compiler will only run freestanding.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D73425
This patch defaults to -mtune=generic unless -march is present. If -march is present we'll use the empty string unless its overridden by mtune. The back should use the target cpu if the tune-cpu isn't present.
It also adds AST serialization support to fix some tests that emit AST and parse it back. These tests diff the IR against the output from not going through AST. So if we don't serialize the tune CPU we fail the diff.
Differential Revision: https://reviews.llvm.org/D86488
This patch adds the z/OS target and defines macros as a stepping stone
towards enabling a native build on z/OS.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D85324
Support -march=sapphirerapids for x86.
Compare with Icelake Server, it includes 14 more new features. They are
amxtile, amxint8, amxbf16, avx512bf16, avx512vp2intersect, cldemote,
enqcmd, movdir64b, movdiri, ptwrite, serialize, shstk, tsxldtrk, waitpkg.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D86503
This patch adds frontend and backend options to enable and disable
the PowerPC MMA operations added in ISA 3.1. Instructions using these
options will be added in subsequent patches.
Differential Revision: https://reviews.llvm.org/D81442
gcc errors on this, but I'm nervous that since -mtune has been
ignored by clang for so long that there may be code bases out
there that pass 32-bit cpus to clang.
This patch moves FixedPointSemantics and APFixedPoint
from Clang to LLVM ADT.
This will make it easier to use the fixed-point
classes in LLVM for constructing an IR builder for
fixed-point and for reusing the APFixedPoint class
for constant evaluation purposes.
RFC: http://lists.llvm.org/pipermail/llvm-dev/2020-August/144025.html
Reviewed By: leonardchan, rjmccall
Differential Revision: https://reviews.llvm.org/D85312
This adds parsing and codegen support for tune in target attribute.
I've implemented this so that arch in the target attribute implicitly disables tune from the command line. I'm not sure what gcc does here. But since -march implies -mtune. I assume 'arch' in the target attribute implies tune in the target attribute.
Differential Revision: https://reviews.llvm.org/D86187
Building on the backend support from D85165. This parses the command line option in the driver, passes it on to CC1 and adds a function attribute.
-Still need to support tune on the target attribute.
-Need to use "generic" as the tuning by default. But need to change generic in the backend first.
-Need to set tune if march is specified and mtune isn't.
-May need to disable getHostCPUName's ability to guess CPU name from features when it doesn't have a family/model match for mtune=native. That's what gcc appears to do.
Differential Revision: https://reviews.llvm.org/D85384
We can use this to remove some calls to initFeatureMap from Sema
and CodeGen when a function doesn't have a target attribute.
This reduces compile time of the linux kernel where this map
is needed to diagnose some inline assembly constraints based
on whether sse, avx, or avx512 is enabled.
Differential Revision: https://reviews.llvm.org/D85807
Properly set "simd128" in the feature map when "unimplemented-simd128"
is requested.
initFeatureMap is used to create the feature vector used by
handleTargetFeatures. There are later calls to initFeatureMap in
CodeGen that were using these flags to recreate the map. But the
original feature vector should be passed to those calls. So that
should be enough to rebuild the map.
The only issue seemed to be that simd128 was not enabled in the
map by the first call to initFeatureMap. Using the SIMDLevel set
by handleTargetFeatures in the later calls allowed simd128 to be
set in the later versions of the map.
To fix this I've added an override of setFeatureEnabled that
will update the map the first time with the correct simd dependency.
Differential Revision: https://reviews.llvm.org/D85806
COFF targets have a max object alignment of 8192, so trying to create
one with a larger size results in an unreachable in WinCOFFObjectWriter.
For the reproducer I have uses thread local storage, however other
alignments are likely affected as well.
This patch sets the MaxVectorAlign for COFF to 8192. Additionally,
though there is no longer a way to reproduce that I could find, it
correctly sets the MaxTLSAlign for COFF to that value as well, so that
if anyone comes up with a situation where this is true, it will cause an
error.
Differential Revision: https://reviews.llvm.org/D85543
If the CPU string is empty, the target feature map may end up having
an empty string inserted to it. The symptom of the problem is a warning
message:
'+' is not a recognized feature for this target (ignoring feature)
Also, the target-features attribute in the module will have an empty
string in it.
Adds frontend and backend options to enable and disable the
PowerPC paired vector memory operations added in ISA 3.1.
Instructions using these options will be added in subsequent patches.
Differential Revision: https://reviews.llvm.org/D83722
This patch implements Clang front end support for the OpenMP TR8
`present` motion modifier for `omp target update` directives. The
next patch in this series implements OpenMP runtime support.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D84711
This patch introduces 2 new address spaces in OpenCL: global_device and global_host
which are a subset of a global address space, so the address space scheme will be
looking like:
```
generic->global->host
->device
->private
->local
constant
```
Justification: USM allocations may be associated with both host and device memory. We
want to give users a way to tell the compiler the allocation type of a USM pointer for
optimization purposes. (Link to the Unified Shared Memory extension:
https://github.com/intel/llvm/blob/sycl/sycl/doc/extensions/USM/cl_intel_unified_shared_memory.asciidoc)
Before this patch USM pointer could be only in opencl_global
address space, hence a device backend can't tell if a particular pointer
points to host or device memory. On FPGAs at least we can generate more
efficient hardware code if the user tells us where the pointer can point -
being able to distinguish between these types of pointers at compile time
allows us to instantiate simpler load-store units to perform memory
transactions.
Patch by Dmitry Sidorov.
Reviewed By: Anastasia
Differential Revision: https://reviews.llvm.org/D82174
This patch implements Clang front end support for the OpenMP TR8
`present` motion modifier for `omp target update` directives. The
next patch in this series implements OpenMP runtime support.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D84711
`to` and `from` clauses take the same modifiers, which are called
"motion modifiers" in TR8, so implement handling of their modifiers
once not twice. This will make it easier to implement additional
motion modifiers in the future.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D84710
Implement AIX default `power` alignment rule by adding `PreferredAlignment` and
`PreferredNVAlignment` in ASTRecordLayout class.
The patchh aims at returning correct value for `__alignof(x)` and `alignof(x)`
under `power` alignment rules.
Differential Revision: https://reviews.llvm.org/D79719
Implement __builtin_eh_return_data_regno for SystemZ.
Match behavior of GCC.
Author: slavek-kucera
Differential Revision: https://reviews.llvm.org/D84341
This patch implements Clang front end support for the OpenMP TR8
`present` map type modifier. The next patch in this series implements
OpenMP runtime support.
This patch does not attempt to implement TR8 sec. 2.22.7.1 "map
Clause", p. 319, L14-16:
> If a map clause with a present map-type-modifier is present in a map
> clause, then the effect of the clause is ordered before all other
> map clauses that do not have the present modifier.
Compare to L10-11, which Clang does not appear to implement yet:
> For a given construct, the effect of a map clause with the to, from,
> or tofrom map-type is ordered before the effect of a map clause with
> the alloc, release, or delete map-type.
This patch also does not implement the `present` implicit-behavior for
`defaultmap` or the `present` motion-modifier for `target update`.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D83061
Use 'o' for the mangling specification instead of 'e'. This fixes an
error in the backend caused by a mismatch between the data layouts
generated by the backend and the frontend.
rdar://problem/64168540
Summary:
This patch implements parsing support for the 'arm_sve_vector_bits' type
attribute, defined by the Arm C Language Extensions (ACLE, version 00bet5,
section 3.7.3) for SVE [1].
The purpose of this attribute is to define fixed-length (VLST) versions
of existing sizeless types (VLAT). For example:
#if __ARM_FEATURE_SVE_BITS==512
typedef svint32_t fixed_svint32_t __attribute__((arm_sve_vector_bits(512)));
#endif
Creates a type 'fixed_svint32_t' that is a fixed-length version of
'svint32_t' that is normal-sized (rather than sizeless) and contains
exactly 512 bits. Unlike 'svint32_t', this type can be used in places
such as structs and arrays where sizeless types can't.
Implemented in this patch is the following:
* Defined and tested attribute taking single argument.
* Checks the argument is an integer constant expression.
* Attribute can only be attached to a single SVE vector or predicate
type, excluding tuple types such as svint32x4_t.
* Added the `-msve-vector-bits=<bits>` flag. When specified the
`__ARM_FEATURE_SVE_BITS__EXPERIMENTAL` macro is defined.
* Added a language option to store the vector size specified by the
`-msve-vector-bits=<bits>` flag. This is used to validate `N ==
__ARM_FEATURE_SVE_BITS`, where N is the number of bits passed to the
attribute and `__ARM_FEATURE_SVE_BITS` is the feature macro defined under
the same flag.
The `__ARM_FEATURE_SVE_BITS` macro will be made non-experimental in the final
patch of the series.
[1] https://developer.arm.com/documentation/100987/latest
This is patch 1/4 of a patch series.
Reviewers: sdesmalen, rsandifo-arm, efriedma, ctetreau, cameron.mcinally, rengolin, aaron.ballman
Reviewed By: sdesmalen, aaron.ballman
Differential Revision: https://reviews.llvm.org/D83550
Summary:
1. gcc uses `-march` and `-mtune` flag to chose arch and
pipeline model, but clang does not have `-mtune` flag,
we uses `-mcpu` to chose both infos.
2. Add SiFive e31 and u54 cpu which have default march
and pipeline model.
3. Specific `-mcpu` with rocket-rv[32|64] would select
pipeline model only, and use the driver's arch choosing
logic to get default arch.
Reviewers: lenary, asb, evandro, HsiangKai
Reviewed By: lenary, asb, evandro
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D71124
This patch adds override to several overriding virtual functions that were missing the keyword within the clang/ directory. These were found by the new -Wsuggest-override.
Remove _COMPAT. Drop the ARCHNAME. Remove the non-COMPAT versions
that are no longer needed.
We now only use these macros in places where we need compatibility
with libgcc/compiler-rt. So we don't need to call out _COMPAT
specifically.
We currently have strict floating point/constrained floating point enabled
for all targets. Constrained SDAG nodes get converted to the regular ones
before reaching the target layer. In theory this should be fine.
However, the changes are exposed to users through multiple clang options
already in use in the field, and the changes are _completely_ _untested_
on almost all of our targets. Bugs have already been found, like
"https://bugs.llvm.org/show_bug.cgi?id=45274".
This patch disables constrained floating point options in clang everywhere
except X86 and SystemZ. A warning will be printed when this happens.
Use the new -fexperimental-strict-floating-point flag to force allowing
strict floating point on hosts that aren't already marked as supporting
it (X86 and SystemZ).
Differential Revision: https://reviews.llvm.org/D80952
setFeatureEnabled is a virtual function. setFeatureEnabledImpl
was its implementation. This split was to avoid virtual calls
when we need to call setFeatureEnabled in initFeatureMap.
With C++11 we can use 'final' on setFeatureEnabled to enable
the compiler to perform de-virtualization for the initFeatureMap
calls.
Previously we had to specify the forward and backwards feature dependencies separately which was error prone. And as dependencies have gotten more complex it was hard to be sure the transitive dependencies were handled correctly. The way it was written was also not super readable.
This patch replaces everything with a table that lists what features a feature is dependent on directly. Then we can recursively walk through the table to find the transitive dependencies. This is largely based on how we handle subtarget features in the MC layer from the tablegen descriptions.
Differential Revision: https://reviews.llvm.org/D83273
Instead of detecting the string in 2 places. Just swap the string
to 'sse4.1' or 'sse4.2' at the top of the function.
Prep work for a patch to switch the rest of this function to a
table based system. And I don't want to include 'sse4a' in the
table.
We currently have strict floating point/constrained floating point enabled
for all targets. Constrained SDAG nodes get converted to the regular ones
before reaching the target layer. In theory this should be fine.
However, the changes are exposed to users through multiple clang options
already in use in the field, and the changes are _completely_ _untested_
on almost all of our targets. Bugs have already been found, like
"https://bugs.llvm.org/show_bug.cgi?id=45274".
This patch disables constrained floating point options in clang everywhere
except X86 and SystemZ. A warning will be printed when this happens.
Differential Revision: https://reviews.llvm.org/D80952
Summary:
Change stack alignment from 64 bits to 128 bits to follow ABI correctly.
And add a regression test for datalayout.
Reviewers: simoll, k-ishizaka
Reviewed By: simoll
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #llvm, #ve, #clang
Differential Revision: https://reviews.llvm.org/D83173
Summary:
D80831 changed part of the prefix usage for AIX.
But there are other places getting prefix from DataLayout.
This patch intends to make prefix usage consistent on AIX.
Reviewed by: hubert.reinterpretcast, daltenty
Differential Revision: https://reviews.llvm.org/D81270
Summary:
This patch is removing the custom enumeration for OpenMP Directives and Clauses and replace them
with the newly tablegen generated one from llvm/Frontend. This is a first patch and some will follow to share the same
infrastructure where possible. The next patch should use the clauses allowance defined in the tablegen file.
Reviewers: jdoerfert, DavidTruby, sscalpone, kiranchandramohan, ichoyjx
Reviewed By: DavidTruby, ichoyjx
Subscribers: jholewinski, cfe-commits, dblaikie, MaskRay, ymandel, ichoyjx, mgorny, yaxunl, guansong, jfb, sstefan1, aaron.ballman, llvm-commits
Tags: #llvm, #flang, #clang
Differential Revision: https://reviews.llvm.org/D82906
This replaces the switch statement implementation in the clang's
X86.cpp with a lookup table in X86TargetParser.cpp.
I've used constexpr and copy of the FeatureBitset from
SubtargetFeature.h to store the features in a lookup table.
After the lookup the bitset is translated into strings for use
by the rest of the frontend code.
I had to modify the implementation of the FeatureBitset to avoid
bugs in gcc 5.5 constexpr handling. It seems to not like the
same array entry to be used on the left side and right hand side
of an assignment or &= or |=. I've also used uint32_t instead of
uint64_t and sized based on the X86::CPU_FEATURE_MAX.
I've initialized the features for different CPUs outside of the
table so that we can express inheritance in an adhoc way. This
was one of the big limitations of the switch and we had resorted
to labels and gotos.
Differential Revision: https://reviews.llvm.org/D82731
Summary:
The following feature macros have been added:
__ARM_FEATURE_SVE_BF16
__ARM_FEATURE_SVE_MATMUL_INT8
__ARM_FEATURE_SVE_MATMUL_FP32
__ARM_FEATURE_SVE_MATMUL_FP64
The driver has been updated to enable them accordingly to the value of
the target feature passed at command line.
The SVE ACLE tests using the macros have been modified to work with
the target feature instead of passing the macro at command line.
Reviewers: sdesmalen, efriedma, c-rhodes, kmclaughlin, SjoerdMeijer, rengolin
Subscribers: tschuett, kristof.beyls, rkruppe, psnobl, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D82623
Previously we inferred it if sse4.2 ended up being enabled after
all feature processing. But writing -march=nehalem -mno-sse4.2
should have popcnt enabled.
This reverts commit defd43a5b3.
with correction to solve msan report
To solve https://bugs.llvm.org/show_bug.cgi?id=46166 where the
floating point settings in PCH files aren't compatible, rewrite
FPFeatures to use a delta in the settings rather than absolute settings.
With this patch, these floating point options can be benign.
Reviewers: rjmccall
Differential Revision: https://reviews.llvm.org/D81869
CPUs with avx always have xsave, but some CPUs without avx also
have xsave. So we shouldn't disable xsave just because avx is
disabled. This would prevent xsave from being enabled with
-march=native on CPUs with xsave and not avx.
But we also don't want -mavx -mno-avx to leave xsave eanabled.
So only enable xsave if avx is enabled after processing all features.
I thought about just not turning xsave on with avx at all, but
there might be someone out there depending on it.
A seemingly innocuous Linux kernel change [0] seemingly blew up our
compile times by over 3x, as reported by @nathanchance in [1].
The code in question uses a doubly nested macro containing GNU C
statement expressions that are then passed to typeof(), which is then
used in a very important macro for atomic variable access throughout
most of the kernel. The inner most macro, is passed a GNU C statement
expression. In this case, we have macro arguments that are GNU C
statement expressions, which can contain a significant number of tokens.
The upstream kernel patch caused significant build time regressions for
both Clang and GCC. Since then, some of the nesting has been removed via
@melver, which helps gain back most of the lost compilation time. [2]
Profiles collected [3] from compilations of the slowest TU for us in the
kernel show:
* 51.4% time spent in clang::TokenLexer::updateLocForMacroArgTokens
* 48.7% time spent in clang::SourceManager::getFileIDLocal
* 35.5% time spent in clang::SourceManager::isOffsetInFileID
(mostly calls from the former through to the latter).
So it seems we have a pathological case for which properly tracking the
SourceLocation of macro arguments is significantly harming build
performance. This stands out in referenced flame graph.
In fact, this case was identified previously as being problematic in
commit 3339c568c4 ("[Lex] Speed up updateConsecutiveMacroArgTokens (NFC)")
Looking at the above call chain, there's 3 things we can do to speed up
this case.
1. TokenLexer::updateConsecutiveMacroArgTokens() calls
SourceManager::isWrittenInSameFile() which calls
SourceManager::getFileID(), which is both very hot and very expensive
to call. SourceManger has a one entry cache, member LastFileIDLookup.
If that isn't the FileID for a give source location offset, we fall
back to a linear probe, and then to a binary search for the FileID.
These fallbacks update the one entry cache, but noticeably they do
not for the case of macro expansions!
For the slowest TU to compile in the Linux kernel, it seems that we
miss about 78.67% of the 68 million queries we make to getFileIDLocal
that we could have had cache hits for, had we saved the macro
expansion source location's FileID in the one entry cache. [4]
I tried adding a separate cache item for macro expansions, and to
check that before the linear then binary search fallbacks, but did
not find it faster than simply allowing macro expansions into the one
item cache. This alone nets us back a lot of the performance loss.
That said, this is a modification of caching logic, which is playing
with a double edged sword. While it significantly improves the
pathological case, its hard to say that there's not an equal but
opposite pathological case that isn't regressed by this change.
Though non-pathological cases of builds of the Linux kernel before
[0] are only slightly improved (<1%) and builds of LLVM itself don't
change due to this patch.
Should future travelers find this change to significantly harm their
build times, I encourage them to feel empowered to revert this
change.
2. SourceManager::getFileIDLocal has a FIXME hinting that the call to
SourceManager::isOffsetInFileID could be made much faster since
isOffsetInFileID is generic in the sense that it tries to handle the
more generic case of "local" (as opposed to "loaded") files, though
the caller has already determined the file to be local. This patch
implements a new method that specialized for use when the caller
already knows the file is local, then use that in
TokenLexer::updateLocForMacroArgTokens. This should be less
controversial than 1, and is likely an across the board win. It's
much less significant for the pathological case, but still a
measurable win once we have fallen to the final case of binary
search. D82497
3. A bunch of methods in SourceManager take a default argument.
SourceManager::getLocalSLocEntry doesn't do anything with this
argument, yet many callers of getLocalSLocEntry setup, pass, then
check this argument. This is wasted work. D82498
With this patch applied, the above profile [5] for the same pathological
input looks like:
* 25.1% time spent in clang::TokenLexer::updateLocForMacroArgTokens
* 17.2% time spent in clang::SourceManager::getFileIDLocal
and clang::SourceManager::isOffsetInFileID is no longer called, and thus
falls out of the profile.
There may be further improvements to the general problem of "what
interval contains one number out of millions" than the current use of a
one item cache, followed by linear probing, followed by binary
searching. We might even be able to do something smarter in
TokenLexer::updateLocForMacroArgTokens.
[0] cdd28ad2d8
[1] https://github.com/ClangBuiltLinux/linux/issues/1032
[2] https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?h=locking/kcsan&id=a5dead405f6be1fb80555bdcb77c406bf133fdc8
[3] https://github.com/ClangBuiltLinux/linux/issues/1032#issuecomment-633712667
[4] https://github.com/ClangBuiltLinux/linux/issues/1032#issuecomment-633741923
[5] https://github.com/ClangBuiltLinux/linux/issues/1032#issuecomment-634932736
Reviewed By: kadircet
Differential Revision: https://reviews.llvm.org/D80681
Forked from D80681.
getLocalSLocEntry() has an unused parameter used to satisfy an interface
of libclang (see getInclusions() in
clang/tools/libclang/CIndexInclusionStack.cpp). It's pointless for
callers to construct/pass/check this inout parameter that can never
signify that a FileID is invalid.
Reviewed By: kadircet
Differential Revision: https://reviews.llvm.org/D82498
This reverts commit b55d723ed6.
Reapply Modify FPFeatures to use delta not absolute settings
To solve https://bugs.llvm.org/show_bug.cgi?id=46166 where the
floating point settings in PCH files aren't compatible, rewrite
FPFeatures to use a delta in the settings rather than absolute settings.
With this patch, these floating point options can be benign.
Reviewers: rjmccall
Differential Revision: https://reviews.llvm.org/D81869
When writing a unit test on replacing standard epilogue sequences with `BR __mspabi_func_epilog_<N>`, by manually asm-clobbering `rN` - `r10` for N = 4..10, everything worked well except for seeming inability to clobber r4.
The problem was that MSP430 code generator of LLVM used an obsolete name FP for that register. Things were worse because when `llc` read an unknown register name, it silently ignored it.
That is, I cannot use `fp` register name from the C code because Clang does not accept it (exactly like GCC). But the accepted name `r4` is not recognised by `llc` (it can be used in listings passed to `llvm-mc` and even `fp` is replace to `r4` by `llvm-mc`). So I can specify any of `fp` or `r4` for the string literal of `asm(...)` but nothing in the clobber list.
This patch replaces `MSP430::FP` with `MSP430::R4` in the backend code (even [MSP430 EABI](http://www.ti.com/lit/an/slaa534/slaa534.pdf) doesn't mention FP as a register name). The R0 - R3 registers, on the other hand, are left as is in the backend code (after all, they have some special meaning on the ISA level). It is just ensured clang is renaming them as expected by the downstream tools. There is probably not much sense in **marking them clobbered** but rename them //just in case// for use at potentially different contexts.
Differential Revision: https://reviews.llvm.org/D82184
These features implicitly enabled XSAVE in the frontend, but not
the backend. Disabling XSAVE in the frontend disabled XSAVEOPT, but
not the other 2. Nothing happened in the backend.
The PREFETCHW instruction was originally part of the 3DNow. But
it was given its own CPUID bit on later CPUs just before 3DNow
was deprecated.
We were setting the -mprfchw flag if -m3dnow was passed or the CPU
supported 3dnow unless -mno-prfchw was passed. But -march=native
on a CPU without the PRFCHW CPUID bit set will pass -mno-prfchw.
So -march=k8 will behave differently than -march=native on a K8
for example.
So remove this implicit setting from the frontend and instead
enable the backend to use PREFETCHW if 3dnow OR prfchw is enabled.
Also enable PRFCHW flag on amdfam10/barcelona which seems to be
where this CPUID bit was introduced. That CPU also supported
3dnow.
The PREFETCHW instruction was originally part of the 3DNow. But
it was given its own CPUID bit on later CPUs just before 3DNow
was deprecated.
We were setting the -mprfchw flag if -m3dnow was passed or the CPU
supported 3dnow unless -mno-prfchw was passed. But -march=native
on a CPU without the PRFCHW CPUID bit set will pass -mno-prfchw.
So -march=k8 will behave differently than -march=native on a K8
for example.
So remove this implicit setting from the frontend and instead
enable the backend to use PREFETCHW if 3dnow OR prfchw is enabled.
Also enable PRFCHW flag on amdfam10/barcelona which seems to be
where this CPUID bit was introduced. That CPU also supported
3dnow.
Summary:
A recent Linux kernel commit exposed a performance cliff in Clang. Calls
to SourceManager::getFileIDLocal() when there's a cache miss against
LastFileIDLookup can be relatively expensive, as getFileIDLocal() tries
a few linear probes, then falls back to binary search. The use of
SourceManager::isOffsetInFileID() is also relatively expensive (both
isOffsetInFileID and getFileIDLocal dominated a trace of the performance
cliff case).
As a FIXME notes (and as @kadircet helpfully noted in review of D80681),
there's a few optimizations we can do here since we've already
identified that an offset is local (as opposed to "loaded").
This patch was forked off of D80681, which additionally did this and
modified some caching behavior, as we expect this change to be less
controversial.
In terms of optimizations, we've already determined that the SLocOffset
parameter to SourceManager::getFileIDLocal() is local in the caller
SourceManager::getFileIDSlow(). Also, there's an early continue in the
binary search loop in getFileIDLocal() that are duplicated in
isOffsetInFileID() as pointed out by @kadircet.
Take advantage of these to optimize the binary search patch, and remove
the FIXME.
Reviewers: kadircet
Reviewed By: kadircet
Subscribers: cfe-commits, kadircet, srhines
Tags: #clang
Differential Revision: https://reviews.llvm.org/D82497
Summary:
Previously OMPD_unknown was last item in the Directive enumeration and its position was
used in various comparison and assertion. With the new Directive enumeration, this should be
change with llvm::omp::Directive_enumSize. This patch fix two place where it was not done in
D81736.
Reviewers: vdmitrie, jdoerfert, jdenny
Reviewed By: jdoerfert
Subscribers: yaxunl, guansong, sstefan1, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D82518
This patch enables the following macros when their corresponding
target attributes are set:
__ARM_FEATURE_SVE (+sve)
__ARM_FEATURE_SVE2 (+sve2)
__ARM_FEATURE_SVE2_AES (+sve2-aes)
__ARM_FEATURE_SVE2_BITPERM (+sve2-bitperm)
__ARM_FEATURE_SVE2_SHA3 (+sve2-sha3)
__ARM_FEATURE_SVE2_SM4 (+sve2-sm4)
This implies that the base SVE and SVE2 ACLE (00bet2) are now feature
complete, meaning that all intrinsics are implemented in LLVM and Clang.
Disclaimer:
To implement the ACLE we have had to fix up many parts of LLVM to make it
support scalable vectors. We have also used many target-specific intrinsics
to reduce reliance on parts of LLVM where we know scalable vectors may
not yet be handled properly (e.g. some transformation might drop the
'scalable' flag on a vector type). While we've done a best effort with
the limited testing that is available to us, we're still working to improve the
stability of the implementation. Additionally, Clang may print warnings
that code may have miscompiled. We find this often to be a false alarm
where the wrong interfaces have been used in LLVM and where resulting
code is not actually incorrect. However, this warrants a bug report
and investigation. If you find any bugs or issues, please raise them on
bugs.llvm.org and let us know!
Reviewers: rengolin, efriedma, david-arm, SjoerdMeijer
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D81725
This patch removes the PROC macro in favor of CPUKind enum and a
table that contains information about CPUs.
The current information in the table is the CPU name, CPUKind enum
value, key feature for target multiversioning, and Is64Bit capable.
For the strings that are aliases, I've duplicated the information
in the table. This means there are more rows in the table than
CPUKind enums.
This replaces multiple StringSwitch's with loops through the table.
They are linear searches due to the table being more logically
ordered than alphabetical. The StringSwitch's would have also been
linear. I've used StringLiteral on the strings in the table so we
can quickly check the length while searching.
I contemplated having a CPUKind for each string so there was a 1:1
mapping, but didn't want to spread more names to the places that
use the enum.
My ultimate goal here is to store the features for each CPU as a
bitset within the table. Hoping to use constexpr to make this
composable so we can group features and inherit them. After the
table lookup we can turn the bitset into a list of strings for the
frontend. The current switch we have for selecting features for
CPUs has become difficult to maintain while trying to express
inheritance relationships.
Differential Revision: https://reviews.llvm.org/D82414
Summary:
As discussed previously when landing patch for OpenMP in Flang, the idea is
to share common part of the OpenMP declaration between the different Frontend.
While doing this it was thought that moving to tablegen instead of Macros will also
give a cleaner and more powerful way of generating these declaration.
This first part of a future series of patches is setting up the base .td file for
DirectiveLanguage as well as the OpenMP version of it. The base file is meant to
be used by other directive language such as OpenACC.
In this first patch, the Directive and Clause enums are generated with tablegen
instead of the macros on OMPConstants.h. The next pacth will extend this
to other enum and move the Flang frontend to use it.
Reviewers: jdoerfert, DavidTruby, fghanim, ABataev, jdenny, hfinkel, jhuber6, kiranchandramohan, kiranktp
Reviewed By: jdoerfert, jdenny
Subscribers: arphaman, martong, cfe-commits, mgorny, yaxunl, hiraditya, guansong, jfb, sstefan1, aaron.ballman, llvm-commits
Tags: #llvm, #openmp, #clang
Differential Revision: https://reviews.llvm.org/D81736
This was orignally done so we could separate the compatibility
values and the llvm internal only features into a separate entries
in the feature array. This was needed when we explicitly had to
convert the feature into the proper 32-bit chunk at every reference
and we didn't want things moving around.
Now everything is in an array and we have helper funtions or macros
to convert encoding to index. So we renumbering is no longer an
issue.
When writing a unit test on replacing standard epilogue sequences with `BR __mspabi_func_epilog_<N>`, by manually asm-clobbering `rN` - `r10` for N = 4..10, everything worked well except for seeming inability to clobber r4.
The problem was that MSP430 code generator of LLVM used an obsolete name FP for that register. Things were worse because when `llc` read an unknown register name, it silently ignored it.
Differential Revision: https://reviews.llvm.org/D82184
Implement the `hasProtectedVisibility()` hook to indicate that, like
Darwin, WebAssembly doesn't support "protected" visibility.
On ELF, "protected" visibility is intended to be an optimization, however
in practice it often [isn't], and ELF documentation generally ranges from
[not mentioning it at all] to [strongly discouraging its use].
[isn't]: https://www.airs.com/blog/archives/307
[not mentioning it at all]: https://gcc.gnu.org/wiki/Visibility
[strongly discouraging its use]: https://www.akkadia.org/drepper/dsohowto.pdf
While here, also mention the new Reactor support in the release notes.
...enumerations from TokenKinds.def and use the new macros from TokenKinds.def
to remove the hard-coded lists of traits.
All the information needed to generate these enumerations is already present
in TokenKinds.def. The motivation here is to be able to dump the trait spelling
without hard-coding the list in yet another place.
Note that this change the order of the enumerators in the enumerations (except
that in the TypeTrait enumeration all unary type traits are before all binary
type traits, and all binary type traits are before all n-ary type traits).
Apart from the aforementioned ordering which is relied upon, after this patch
no code in clang or in the various clang tools depend on the specific ordering
of the enumerators.
No functional changes intended.
Differential Revision: https://reviews.llvm.org/D81455
Reviewed By: aaron.ballman
Summary:
New file include to support platform dependent grid constants. It will be
used by clang, libomptarget plugins, and deviceRTLs to access constant
values consistently and with fast access in the deviceRTLs.
Originally authored by Greg Rodgers (@gregrodgers).
Reviewers: arsenm, sameerds, jdoerfert, yaxunl, b-sumner, scchan, JonChesterfield
Reviewed By: arsenm
Subscribers: llvm-commits, pdhaliwal, jholewinski, jvesely, wdng, nhaehnle, guansong, kerbowa, sstefan1, cfe-commits, ronlieb, gregrodgers
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D80917
Similar to what some other targets have done. This information
could be reused by other frontends so doesn't make sense to live
in clang.
-Rename CK_Generic to CK_None to better reflect its illegalness.
-Move function for translating from string to enum into llvm.
-Call checkCPUKind directly from the string to enum translation
and update CPU kind to CK_None accordinly. Caller will use CK_None
as sentinel for bad CPU.
I'm planning to move all the CPU to feature mapping out next. As
part of that I want to devise a better way to express CPUs inheriting
features from an earlier CPU. Allowing this to be expressed in a
less rigid way than just falling through a switch. Or using gotos
as we've had to do lately.
Differential Revision: https://reviews.llvm.org/D81439
Summary:
This patch upstreams support for a new storage only bfloat16 C type.
This type is used to implement primitive support for bfloat16 data, in
line with the Bfloat16 extension of the Armv8.6-a architecture, as
detailed here:
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
The bfloat type, and its properties are specified in the Arm Architecture
Reference Manual:
https://developer.arm.com/docs/ddi0487/latest/arm-architecture-reference-manual-armv8-for-armv8-a-architecture-profile
In detail this patch:
- introduces an opaque, storage-only C-type __bf16, which introduces a new bfloat IR type.
This is part of a patch series, starting with command-line and Bfloat16
assembly support. The subsequent patches will upstream intrinsics
support for BFloat16, followed by Matrix Multiplication and the
remaining Virtualization features of the armv8.6-a architecture.
The following people contributed to this patch:
- Luke Cheeseman
- Momchil Velikov
- Alexandros Lamprineas
- Luke Geeson
- Simon Tatham
- Ties Stuij
Reviewers: SjoerdMeijer, rjmccall, rsmith, liutianle, RKSimon, craig.topper, jfb, LukeGeeson, fpetrogalli
Reviewed By: SjoerdMeijer
Subscribers: labrinea, majnemer, asmith, dexonsmith, kristof.beyls, arphaman, danielkiss, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76077
Summary:
An upgrade of LLVM for CrOS [0] containing [1] triggered a bunch of
errors related to writing to reserved registers for a Linux kernel's
arm64 compat vdso (which is a aarch32 image).
After a discussion on LKML [2], it was determined that
-f{no-}omit-frame-pointer was not being specified. Comparing GCC and
Clang [3], it becomes apparent that GCC defaults to omitting the frame
pointer implicitly when optimizations are enabled, and Clang does not.
ie. setting -O1 (or above) implies -fomit-frame-pointer. Clang was
defaulting to -fno-omit-frame-pointer implicitly unless -fomit-frame-pointer
was set explicitly.
Why this becomes a problem is that the Linux kernel's arm64 compat vdso
contains code that uses r7. r7 is used sometimes for the frame pointer
(for example, when targeting thumb (-mthumb)). See useR7AsFramePointer()
in llvm/llvm-project/llvm/lib/Target/ARM/ARMSubtarget.h. This is mostly
for legacy/compatibility reasons, and the 2019 Q4 revision of the ARM
AAPCS looks to standardize r11 as the frame pointer for aarch32, though
this is not yet implemented in LLVM.
Users that are reliant on the implicit value if unspecified when
optimizations are enabled should explicitly choose -fomit-frame-pointer
(new behavior) or -fno-omit-frame-pointer (old behavior).
[0] https://bugs.chromium.org/p/chromium/issues/detail?id=1084372
[1] https://reviews.llvm.org/D76848
[2] https://lore.kernel.org/lkml/20200526173117.155339-1-ndesaulniers@google.com/
[3] https://godbolt.org/z/0oY39t
Reviewers: kristof.beyls, psmith, danalbert, srhines, MaskRay, ostannard, efriedma
Reviewed By: psmith, danalbert, srhines, MaskRay, efriedma
Subscribers: efriedma, olista01, MaskRay, vhscampos, cfe-commits, llvm-commits, manojgupta, llozano, glider, hctim, eugenis, pcc, peter.smith, srhines
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D80828
The headers provided with recent GNU toolchains for PPC have code that includes
typedefs such as:
typedef _Complex float __cfloat128 __attribute__ ((__mode__ (__KC__)))
This patch allows clang to compile programs that contain
#include <math.h>
with -mfloat128 which it currently fails to compile.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=46068
Differential revision: https://reviews.llvm.org/D80374
Summary:
This patch simply adds support for the new CPU in anticipation of
Power10. There isn't really any functionality added so there are no
associated test cases at this time.
Reviewers: stefanp, nemanjai, amyk, hfinkel, power-llvm-team, #powerpc
Reviewed By: stefanp, nemanjai, amyk, #powerpc
Subscribers: NeHuang, steven.zhang, hiraditya, llvm-commits, wuzish, shchenz, cfe-commits, kbarton, echristo
Tags: #clang, #powerpc, #llvm
Differential Revision: https://reviews.llvm.org/D80020
Summary:
This patch simply adds support for the new CPU in anticipation of
Power10. There isn't really any functionality added so there are no
associated test cases at this time.
Reviewers: stefanp, nemanjai, amyk, hfinkel, power-llvm-team, #powerpc
Reviewed By: stefanp, nemanjai, amyk, #powerpc
Subscribers: NeHuang, steven.zhang, hiraditya, llvm-commits, wuzish, shchenz, cfe-commits, kbarton, echristo
Tags: #clang, #powerpc, #llvm
Differential Revision: https://reviews.llvm.org/D80020
Summary: 'A' constraint requires an immediate int or fp constant that can be inlined in an instruction encoding.
This is the second part of the change. The llvm part has been committed as b087b91c91.
See https://reviews.llvm.org/D78494
Reviewers: arsenm, rampitec
Differential Revision: https://reviews.llvm.org/D79493
We currently emit incorrect codegen for this constraint because we set it as a
constraint that allows registers. This will cause the value to be copied to the
stack and that address to be passed as the address. This is not what we want.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=42762
Differential revision: https://reviews.llvm.org/D77542
The commit 3c28a2dc6b introduced the check that checks if we're
trying to re-enter a main file when building a preamble. Unfortunately this slowed down the preamble
compilation by 80-90% in some test cases, as translateFile is really slow. This change checks
to see if the FileEntry is the main file without calling translateFile, but by using the new
isMainFile check instead. This speeds up preamble building by 1.5-2x for certain test cases that we have.
rdar://59361291
Differential Revision: https://reviews.llvm.org/D79834
gcov 4.8 (r189778) moved the exit block from the last to the second.
The .gcda format is compatible with 4.7 but
* decoding libgcov 4.7 produced .gcda with gcov [4.7,8) can mistake the
exit block, emit bogus `%s:'%s' has arcs from exit block\n` warnings,
and print wrong `" returned %s` for branch statistics (-b).
* decoding libgcov 4.8 produced .gcda with gcov 4.7 has similar issues.
Also, rename "return block" to "exit block" because the latter is the
appropriate term.
Defaulting to -Xclang -coverage-version='407*' makes .gcno/.gcda
compatible with gcov [4.7,8)
In addition, delete clang::CodeGenOptionsBase::CoverageExtraChecksum and GCOVOptions::UseCfgChecksum.
We can infer the information from the version.
With this change, .gcda files produced by `clang --coverage a.o` linked executable can be read by gcov 4.7~7.
We don't need other -Xclang -coverage* options.
There may be a mismatching version warning, though.
(Note, GCC r173147 "split checksum into cfg checksum and line checksum"
made gcov 4.7 incompatible with previous versions.)
I discovered that the limit on possible builtins managed by this
ObjCOrBuiltin variable is too low when combining large targets, since
aux-targets are appended to the targets list. A runtime assert exists
for this, however this patch creates a static-assert as well.
The logic for said static-assert is to make sure we have the room for
the aux-target and target to both be the largest list, which makes sure
we have room for all possible combinations.
I also incremented the number of bits by 1, since I discovered this
currently broken. The current bit-count was 36, so this doesn't
increase any size.
Neither gcc or icc support this. Split out from D79472. I want
to remove more, but it looks like icc does support some things
gcc doesn't and I need to double check our internal test suites.
Y is the start of several 2 letter constraints, but we also had
partial support to recognize it by itself. But it doesn't look
like it can get through clang as a single letter so the backend
support for this was effectively dead.
This is the result of an audit of all of the ABIs in clang to implement
and enable the type for those targets.
Additionally, this finds an issue with integer-promotion passing for a
few platforms when using _ExtInt of < int, so this also corrects that
resulting in signext/zeroext being on a params of those types in some
platforms.
Differential Revisions: https://reviews.llvm.org/D79118
gcc supports selecting ymm0/zmm0 for the Yz constraint when used with 256 or 512 bit vector types.
Fixes PR45806
Differential Revision: https://reviews.llvm.org/D79448
Since the _ExtInt type got into the repo, we've discovered that the ABI
implications weren't completely understood. The other architectures are
going to be audited (see D79118), however downstream targets aren't
going to benefit from this audit.
This patch disables the _ExtInt type by default and makes the
target-info an opt-in. As it is audited, I'll re-enable these for all
of our default targets.
While we don't support 32-bit architectures in Fuchsia, these are needed
in the early boot phase on x86, so we build just these to satisfy that
use case.
Differential Revision: https://reviews.llvm.org/D78687
This patch upstreams support for the Armv8.6-a Matrix Multiplication
Extension. A summary of the features can be found here:
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
This patch includes:
- Assembly support for AArch32
- Intrinsics Support for AArch32 Neon Intrinsics for Matrix
Multiplication
Note: these extensions are optional in the 8.6a architecture and so have
to be enabled by default
No additional IR types or C Types are needed for this extension.
This is part of a patch series, starting with BFloat16 support and
the other components in the armv8.6a extension (in previous patches
linked in phabricator)
Based on work by:
- Luke Geeson
- Oliver Stannard
- Luke Cheeseman
Reviewers: t.p.northover, miyuki
Reviewed By: miyuki
Subscribers: miyuki, ostannard, kristof.beyls, hiraditya, danielkiss,
cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77872
This patch upstreams support for the Armv8.6-a Matrix Multiplication
Extension. A summary of the features can be found here:
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
This patch includes:
- Assembly support for AArch64 only (no SVE or Neon)
- Intrinsics Support for AArch64 Armv8.6a Matrix Multiplication Instructions (No bfloat16 matrix multiplication)
No IR types or C Types are needed for this extension.
This is part of a patch series, starting with BFloat16 support and
the other components in the armv8.6a extension (in previous patches
linked in phabricator)
Based on work by:
- Luke Geeson
- Oliver Stannard
- Luke Cheeseman
Reviewers: ostannard, t.p.northover, rengolin, kmclaughlin
Reviewed By: kmclaughlin
Subscribers: kmclaughlin, kristof.beyls, hiraditya, danielkiss,
cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77871
Summary:
Macro argument expansion logic relies on skipping file IDs that created
as a result of an include. Unfortunately it fails to do that for
predefined buffer since it doesn't have a valid insertion location.
As a result of that any file ID created for an include inside the
predefined buffers breaks the traversal logic in
SourceManager::computeMacroArgsCache.
To fix this issue we first record number of created FIDs for predefined
buffer, and then skip them explicitly in source manager.
Another solution would be to just give predefined buffers a valid source
location, but it is unclear where that should be..
Reviewers: sammccall
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D78649
whether they have missing header files.
Whether a module's headers happen to be present on the local file system
should make no difference to whether we make its contents visible when
importing another module that re-exports it. If we have an up-to-date
AST file that we can load, that's all that matters.
This fixes the ability to header syntax checking for modular headers in
C++20 mode (or in prior modes where -fmodules-local-submodule-visibility
is enabled but -fmodules is not).
modules too.
This more accurately reflects the semantics of this flag, as distinct
from "IsAvailable", which (in an explicit modules world) only describes
whether a module is buildable, not whether it's importable.
This is needed to fix the reason
0a2be46cfd (Modules: Invalidate out-of-date PCMs as they're
discovered) and 5b44a4b07fc1d ([modules] Do not cache invalid state for
modules that we attempted to load.) were reverted.
These patches changed Clang to use `isVolatile` when loading modules.
This had the side effect of not using mmap when loading modules, and
thus greatly increased memory usage.
The reason it wasn't using mmap is because `MemoryBuffer` plays some
games with file size when you request null termination, and it has to
disable these when `isVolatile` is set as the size may change by the
time it's mmapped. Clang by default passes
`RequiresNullTerminator = true`, and `shouldUseMmap` ignored if
`RequiresNullTerminator` was even requested.
This patch adds `RequiresNullTerminator` to the `FileManager` interface
so Clang can use it when loading modules, and changes `shouldUseMmap` to
only take volatility into account if `RequiresNullTerminator` is true.
This is fine as both `mmap` and a `read` loop are vulnerable to
modifying the file while reading, but are immune to the rename Clang
does when replacing a module file.
Differential Revision: https://reviews.llvm.org/D77772
This symbol is defined in avr-gcc. Because AVR normally uses the ELF
format, define the symbol unconditionally.
This patch is needed to get Clang to compile compiler-rt.
Differential Revision: https://reviews.llvm.org/D78117
Generate PTX using newer versions of PTX and allow using sm_80 with CUDA-11.
None of the new features of CUDA-10.2+ have been implemented yet, so using these
versions will still produce a warning.
Differential Revision: https://reviews.llvm.org/D77670
Instead of hardcoding individual GPU mappings in multiple functions, keep them
all in one table and use it to look up the mappings.
We also don't care about 'virtual' architecture much, so the API is trimmed down
down to a simpler GPU->Virtual arch name lookup.
Differential Revision: https://reviews.llvm.org/D77665
Move the listing of allowed clauses per OpenMP directive to the new
macro file in `llvm/Frontend/OpenMP`. Also, use a single generic macro
that specifies the directive and one allowed clause explicitly instead
of a dedicated macro per directive.
We save 800 loc and boilerplate for all new directives/clauses with no
functional change. We also need to include the macro file only once and
not once per directive.
Depends on D77112.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D77113
This is a cleanup and normalization patch that also enables reuse with
Flang later on. A follow up will clean up and move the directive ->
clauses mapping.
Reviewed By: fghanim
Differential Revision: https://reviews.llvm.org/D77112
Summary:
- `RegisterVar` has `void` return type and `size_t` in its variable size
parameter in HIP or CUDA 9.0+.
Reviewers: tra, yaxunl
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77398
Summary:
As defined by Arm C Language Extensions (ACLE) these macro defines
should be set to specific values depending on -mbranch-protection.
Reviewers: chill
Reviewed By: chill
Subscribers: danielkiss, cfe-commits, kristof.beyls
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77134
This is a cleanup and normalization patch that also enables reuse with
Flang later on. A follow up will clean up and move the directive ->
clauses mapping.
Differential Revision: https://reviews.llvm.org/D77112
This API is used by LLDB to attach owning module information to
Declarations deserialized from DWARF.
Differential Revision: https://reviews.llvm.org/D75561
Currently, bpf does not specify 128bit alignment in its
layout spec. So for a structure like
struct ipv6_key_t {
unsigned pid;
unsigned __int128 saddr;
unsigned short lport;
};
clang will generate IR type
%struct.ipv6_key_t = type { i32, [12 x i8], i128, i16, [14 x i8] }
Additional padding is to ensure later IR->MIR can generate correct
stack layout with target layout spec.
But it is common practice for a tracing program to be
first compiled with target flag (e.g., x86_64 or aarch64) through
clang to generate IR and then go through llc to generate bpf
byte code. Tracing program often refers to kernel internal
data structures which needs to be compiled with non-bpf target.
But such a compilation model may cause a problem on aarch64.
The bcc issue https://github.com/iovisor/bcc/issues/2827
reported such a problem.
For the above structure, since aarch64 has "i128:128" in its
layout string, the generated IR will have
%struct.ipv6_key_t = type { i32, i128, i16 }
Since bpf does not have "i128:128" in its spec string,
the selectionDAG assumes alignment 8 for i128 and
computes the stack storage size for the above is 32 bytes,
which leads incorrect code later.
The x86_64 does not have this issue as it does not have
"i128:128" in its layout spec as it does permits i128 to
be alignmented at 8 bytes at stack. Its IR type looks like
%struct.ipv6_key_t = type { i32, [12 x i8], i128, i16, [14 x i8] }
The fix here is add i128 support in layout spec, the same as
aarch64. The only downside is we may have less optimal stack
allocation in certain cases since we require 16byte alignment
for i128 instead of 8. But this is probably fine as i128 is
not used widely and in most cases users should already
have proper alignment.
Differential Revision: https://reviews.llvm.org/D76587
The main purpose of introducing these builtins is to add a range
metadata [1, 1025) on the work group size loaded from dispatch
ptr, which cannot be done by source code.
Differential Revision: https://reviews.llvm.org/D76772
This is the first part extracted from D71179 and cleaned up.
This patch provides parsing support for `omp begin/end declare variant`,
as defined in OpenMP technical report 8 (TR8) [0].
A major purpose of this patch is to provide proper math.h/cmath support
for OpenMP target offloading. See PR42061, PR42798, PR42799. The current
code was developed with this feature in mind, see [1].
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D74941
Summary:
This patch introduces command-line support for the Armv8.6-a architecture and assembly support for BFloat16. Details can be found
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
in addition to the GCC patch for the 8..6-a CLI:
https://gcc.gnu.org/legacy-ml/gcc-patches/2019-11/msg02647.html
In detail this patch
- march options for armv8.6-a
- BFloat16 assembly
This is part of a patch series, starting with command-line and Bfloat16
assembly support. The subsequent patches will upstream intrinsics
support for BFloat16, followed by Matrix Multiplication and the
remaining Virtualization features of the armv8.6-a architecture.
Based on work by:
- labrinea
- MarkMurrayARM
- Luke Cheeseman
- Javed Asbar
- Mikhail Maltsev
- Luke Geeson
Reviewers: SjoerdMeijer, craig.topper, rjmccall, jfb, LukeGeeson
Reviewed By: SjoerdMeijer
Subscribers: stuij, kristof.beyls, hiraditya, dexonsmith, danielkiss, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D76062
Summary:
This patch adds a virtual method `getCPUCacheLineSize()` to `TargetInfo`. Currently, I've only implemented the method in `X86TargetInfo`. It's extremely important that each CPU's cache line size correct (e.g., we can't just define it as `64` across the board) so, it has been a little slow getting to this point.
I'll work on the ARM CPUs next, but that will probably come later in a different patch.
Tags: #clang
Differential Revision: https://reviews.llvm.org/D74918
Currently square-bracket-style (CXX11/C2X) attribute names are normalised to
start with :: if they don't have a namespace. This is a bit odd, as such
names are rejected when parsing, so don't do this.
Differential Revision: https://reviews.llvm.org/D76704
Reworked the patch to avoid sharing a header (SVETypeFlags.h) between
include/clang/Basic and utils/TableGen/SveEmitter.cpp. Now the patch
generates the enum/flags which is included in TargetBuiltins.h.
Also renamed one of the SveEmitter options to be in line with MVE.
Summary:
This is a first patch in a series for the SveEmitter to generate the arm_sve.h
header file and builtins.
I've tried my best to strip down this patch as best as I could, but there
are still a few changes that are not necessarily exercised by the load intrinsics
in this patch, mostly around the SVEType class which has some common logic to
represent types from a type and prototype string. I thought it didn't make
much sense to remove that from this patch and split it up.
This flag is used by avr-gcc (starting with v10) to set the width of the
double type. The double type is by default interpreted as a 32-bit
floating point number in avr-gcc instead of a 64-bit floating point
number as is common on other architectures. Starting with GCC 10, a new
option has been added to control this behavior:
https://gcc.gnu.org/wiki/avr-gcc#Deviations_from_the_Standard
This commit keeps the default double at 32 bits but adds support for the
-mdouble flag (-mdouble=32 and -mdouble=64) to control this behavior.
Differential Revision: https://reviews.llvm.org/D76181
Summary:
Adds the constraints described below to ensure that we
can tie variables of SVE ACLE types to operands in inline-asm:
- y: SVE registers Z0-Z7
- Upl: One of the low eight SVE predicate registers (P0-P7)
- Upa: Full range of SVE predicate registers (P0-P15)
Reviewers: sdesmalen, huntergr, rovka, cameron.mcinally, efriedma, rengolin
Reviewed By: efriedma
Subscribers: miyuki, tschuett, rkruppe, psnobl, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75690
This is a first patch in a series for the SveEmitter to generate the arm_sve.h
header file and builtins.
I've tried my best to strip down this patch as best as I could, but there
are still a few changes that are not necessarily exercised by the load intrinsics
in this patch, mostly around the SVEType class which has some common logic to
represent types from a type and prototype string. I thought it didn't make
much sense to remove that from this patch and split it up.
Reviewers: efriedma, rovka, SjoerdMeijer, rsandifo-arm, rengolin
Reviewed By: SjoerdMeijer
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75470
Most clients of SourceManager.h need to do things like turning source
locations into file & line number pairs, but this doesn't require
bringing in FileManager.h and LLVM's FS headers.
The main code change here is to sink SM::createFileID into the cpp file.
I reason that this is not performance critical because it doesn't happen
on the diagnostic path, it happens along the paths of macro expansion
(could be hot) and new includes (less hot).
Saves some includes:
309 - /usr/local/google/home/rnk/llvm-project/clang/include/clang/Basic/FileManager.h
272 - /usr/local/google/home/rnk/llvm-project/clang/include/clang/Basic/FileSystemOptions.h
271 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/VirtualFileSystem.h
267 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/FileSystem.h
266 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/Chrono.h
Differential Revision: https://reviews.llvm.org/D75406
Module.h takes 86ms to parse, mostly parsing the class itself. Avoid it
if possible. ASTContext.h depends on ExternalASTSource.h.
A few NFC changes were needed to make this possible:
- Move ASTSourceDescriptor to Module.h. This needs Module to be
complete, and seems more related to modules and AST files than
external AST sources.
- Move "import complete" bit from Module* pointer int pair to
NextLocalImport pointer. Required because PointerIntPair<Module*,...>
requires Module to be complete, and now it may not be.
Reviewed By: aaron.ballman, hans
Differential Revision: https://reviews.llvm.org/D75784
Summary:
This patch implements feature test macros for the CDE extension
according to the upcoming ACLE specification.
The following 2 macros are being added:
- __ARM_FEATURE_CDE - defined as '1' when any coprocessor is
configured as a CDE coprocessor
- __ARM_FEATURE_CDE_COPROC - defined as an 8-bit mask, each bit of the
mask corresponds to a coprocessor and is set when the corresponding
coprocessor is configured as CDE (and cleared otherwise).
The patch also exposes the value of __ARM_FEATURE_CDE_COPROC in the
target-independent method TargetInfo::getARMCDECorpocMask, the method
will be used in follow-up patches implementing semantic checks of CDE
intrinsics (we want to diagnose the cases when CDE intrinsics are used
with coprocessors that are not configured as CDE).
Reviewers: simon_tatham, dmgreen, ostannard, MarkMurrayARM
Reviewed By: simon_tatham
Subscribers: kristof.beyls, danielkiss, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75843
FileManager.h is an expensive header (~350ms for me in isolation), so
try to do without it.
Notably, we need to avoid checking the alignment of FileEntry, which
happens for DenseMap<FileEntry*> and PointerUnion<FileEntry*>. I
adjusted the code to avoid PointerUnion, and moved the DenseMap
insertion to the .cpp file.
Globally, this only saved about ~17 includes of the related headers
because SourceManager.h still includes FileManager.h, and it is more
popular than Module.h.
When constructing a ParsedAttr the ParsedAttrInfo gets looked up in the
AttrInfoMap, which is auto-generated using tablegen. If that lookup fails then
we look through the ParsedAttrInfos that plugins have added to the registry and
check if any has a spelling that matches.
Differential Revision: https://reviews.llvm.org/D31338
This PR enables "XL" C++ ABI in frontend AST to IR codegen. And it is driven by
static init work. The current kind in Clang by default is Generic Itanium, which
has different behavior on static init with IBM xlclang compiler on AIX.
Differential Revision: https://reviews.llvm.org/D74015
Make Clang on aarch64 targets predefine `__AARCH64_CMODEL_SMALL__`
or `__AARCH64_CMODEL_TINY__`, etc. These are the names that GCC
uses for its predefines.
Reviewed By: tamur, MaskRay
Differential Revision: https://reviews.llvm.org/D75002
This commit removes the artificial types <512 x i1> and <1024 x i1>
from HVX intrinsics, and makes v512i1 and v1024i1 no longer legal on
Hexagon.
It may cause existing bitcode files to become invalid.
* Converting between vector predicates and vector registers must be
done explicitly via vandvrt/vandqrt instructions (their intrinsics),
i.e. (for 64-byte mode):
%Q = call <64 x i1> @llvm.hexagon.V6.vandvrt(<16 x i32> %V, i32 -1)
%V = call <16 x i32> @llvm.hexagon.V6.vandqrt(<64 x i1> %Q, i32 -1)
The conversion intrinsics are:
declare <64 x i1> @llvm.hexagon.V6.vandvrt(<16 x i32>, i32)
declare <128 x i1> @llvm.hexagon.V6.vandvrt.128B(<32 x i32>, i32)
declare <16 x i32> @llvm.hexagon.V6.vandqrt(<64 x i1>, i32)
declare <32 x i32> @llvm.hexagon.V6.vandqrt.128B(<128 x i1>, i32)
They are all pure.
* Vector predicate values cannot be loaded/stored directly. This directly
reflects the architecture restriction. Loading and storing or vector
predicates must be done indirectly via vector registers and explicit
conversions via vandvrt/vandqrt instructions.
This swaps out the OpenMPDefaultClauseKind enum with a
llvm::omp::DefaultKind enum which is stored in OMPConstants.h.
This should not change any functionality.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D74513
This patch implements an almost complete handling of OpenMP
contexts/traits such that we can reuse most of the logic in Flang
through the OMPContext.{h,cpp} in llvm/Frontend/OpenMP.
All but construct SIMD specifiers, e.g., inbranch, and the device ISA
selector are define in `llvm/lib/Frontend/OpenMP/OMPKinds.def`. From
these definitions we generate the enum classes `TraitSet`,
`TraitSelector`, and `TraitProperty` as well as conversion and helper
functions in `llvm/lib/Frontend/OpenMP/OMPContext.{h,cpp}`.
The above enum classes are used in the parser, sema, and the AST
attribute. The latter is not a collection of multiple primitive variant
arguments that contain encodings via numbers and strings but instead a
tree that mirrors the `match` clause (see `struct OpenMPTraitInfo`).
The changes to the parser make it more forgiving when wrong syntax is
read and they also resulted in more specialized diagnostics. The tests
are updated and the core issues are detected as before. Here and
elsewhere this patch tries to be generic, thus we do not distinguish
what selector set, selector, or property is parsed except if they do
behave exceptionally, as for example `user={condition(EXPR)}` does.
The sema logic changed in two ways: First, the OMPDeclareVariantAttr
representation changed, as mentioned above, and the sema was adjusted to
work with the new `OpenMPTraitInfo`. Second, the matching and scoring
logic moved into `OMPContext.{h,cpp}`. It is implemented on a flat
representation of the `match` clause that is not tied to clang.
`OpenMPTraitInfo` provides a method to generate this flat structure (see
`struct VariantMatchInfo`) by computing integer score values and boolean
user conditions from the `clang::Expr` we keep for them.
The OpenMP context is now an explicit object (see `struct OMPContext`).
This is in anticipation of construct traits that need to be tracked. The
OpenMP context, as well as the `VariantMatchInfo`, are basically made up
of a set of active or respectively required traits, e.g., 'host', and an
ordered container of constructs which allows duplication. Matching and
scoring is kept as generic as possible to allow easy extension in the
future.
---
Test changes:
The messages checked in `OpenMP/declare_variant_messages.{c,cpp}` have
been auto generated to match the new warnings and notes of the parser.
The "subset" checks were reversed causing the wrong version to be
picked. The tests have been adjusted to correct this.
We do not print scores if the user did not provide one.
We print spaces to make lists in the `match` clause more legible.
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim
Subscribers: merge_guards_bot, rampitec, mgorny, hiraditya, aheejin, fedor.sergeev, simoncook, bollu, guansong, dexonsmith, jfb, s.egerton, llvm-commits, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71830
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with proper LiveIn
declaration, better option handling and more portable testing.
Differential Revision: https://reviews.llvm.org/D68720
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with proper LiveIn
declaration, better option handling and more portable testing.
Differential Revision: https://reviews.llvm.org/D68720
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with better option
handling and more portable testing
Differential Revision: https://reviews.llvm.org/D68720
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with correct option
flags set.
Differential Revision: https://reviews.llvm.org/D68720
This reverts commit 39f50da2a3.
The -fstack-clash-protection is being passed to the linker too, which
is not intended.
Reverting and fixing that in a later commit.
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
Differential Revision: https://reviews.llvm.org/D68720
Summary:
For now, this ABI simply expands all possible aggregate arguments and
returns all possible aggregates directly. This ABI will change rapidly
as we prototype and benchmark a new ABI that takes advantage of
multivalue return and possibly other changes from the MVP ABI.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D72972
AMDGPU and x86 at least both have separate controls for whether
denormal results are flushed on output, and for whether denormals are
implicitly treated as 0 as an input. The current DAGCombiner use only
really cares about the input treatment of denormals.
Summary:
This patch changes the underlying type of the ARM::ArchExtKind
enumeration to uint64_t and adjusts the related code.
The goal of the patch is to prepare the code base for a new
architecture extension.
Reviewers: simon_tatham, eli.friedman, ostannard, dmgreen
Reviewed By: dmgreen
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits, pbarrio
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73906
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
This makes clang somewhat forward-compatible with new CUDA releases
without having to patch it for every minor release without adding
any new function.
If an unknown version is found, clang issues a warning (can be disabled
with -Wno-cuda-unknown-version) and assumes that it has detected
the latest known version. CUDA releases are usually supersets
of older ones feature-wise, so it should be sufficient to keep
released clang versions working with minor CUDA updates without
having to upgrade clang, too.
Differential Revision: https://reviews.llvm.org/D73231
This CL adds clang declarations of built-in functions for AMDGPU MFMA intrinsics and instructions.
OpenCL tests for new built-ins are included.
Differential Revision: https://reviews.llvm.org/D72723
Summary:
As discussed in http://lists.llvm.org/pipermail/cfe-dev/2019-October/063459.html
the overflow of the souce locations (limited to 2^31 chars) can generate all sorts of
weird things (bogus warnings, hangs, crashes, miscompilation and correct compilation).
In debug mode this assert would fail. So it might be a good start, as in PR42301,
to detect the failure and exit with a proper error message.
Reviewers: rsmith, thakis, miyuki
Reviewed By: miyuki
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D70183
Since 2009 (in r63846) we've been `#define`-ing OBJC_NEW_PROPERTIES all
the time on Darwin, but this macro only makes sense for `-x objective-c`
and `-x objective-c++`. Restrict it to those cases (for which there is
already separate logic).
https://reviews.llvm.org/D72970
rdar://problem/10050342
Summary:
This adds the reference types target feature. This does not enable any
more functionality in LLVM/clang for now, but this is necessary to embed
the info in the target features section, which is used by Binaryen and
Emscripten. It turned out that after D69832 `-fwasm-exceptions` crashed
because we didn't have the reference types target feature.
Reviewers: tlively
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73320
This adds basic support for the Swift calling convention with WebAssembly
targets.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D71823
Now with concepts support merged and mostly complete, we do not need -fconcepts-ts
(which was also misleading as we were not implementing the TS) and can enable
concepts features under C++2a. A warning will be generated if users still attempt
to use -fconcepts-ts.
Currently there are 4 different mechanisms for controlling denormal
flushing behavior, and about as many equivalent frontend controls.
- AMDGPU uses the fp32-denormals and fp64-f16-denormals subtarget features
- NVPTX uses the nvptx-f32ftz attribute
- ARM directly uses the denormal-fp-math attribute
- Other targets indirectly use denormal-fp-math in one DAGCombine
- cl-denorms-are-zero has a corresponding denorms-are-zero attribute
AMDGPU wants a distinct control for f32 flushing from f16/f64, and as
far as I can tell the same is true for NVPTX (based on the attribute
name).
Work on consolidating these into the denormal-fp-math attribute, and a
new type specific denormal-fp-math-f32 variant. Only ARM seems to
support the two different flush modes, so this is overkill for the
other use cases. Ideally we would error on the unsupported
positive-zero mode on other targets from somewhere.
Move the logic for selecting the flush mode into the compiler driver,
instead of handling it in cc1. denormal-fp-math/denormal-fp-math-f32
are now both cc1 flags, but denormal-fp-math-f32 is not yet exposed as
a user flag.
-cl-denorms-are-zero, -fcuda-flush-denormals-to-zero and
-fno-cuda-flush-denormals-to-zero will be mapped to
-fp-denormal-math-f32=ieee or preserve-sign rather than the old
attributes.
Stop emitting the denorms-are-zero attribute for the OpenCL flag. It
has no in-tree users. The meaning would also be target dependent, such
as the AMDGPU choice to treat this as only meaning allow flushing of
f32 and not f16 or f64. The naming is also potentially confusing,
since DAZ in other contexts refers to instructions implicitly treating
input denormals as zero, not necessarily flushing output denormals to
zero.
This also does not attempt to change the behavior for the current
attribute. The LangRef now states that the default is ieee behavior,
but this is inaccurate for the current implementation. The clang
handling is slightly hacky to avoid touching the existing
denormal-fp-math uses. Fixing this will be left for a future patch.
AMDGPU is still using the subtarget feature to control the denormal
mode, but the new attribute are now emitted. A future change will
switch this and remove the subtarget features.
Extend -fxray-instrumentation-bundle to split function-entry and
function-exit into two separate options, so that it is possible to
instrument only function entry or only function exit. For use cases
that only care about one or the other this will save significant overhead
and code size.
Differential Revision: https://reviews.llvm.org/D72890
When LLVM_APPEND_VC_REV=OFF is set, the current git hash is no
longer embedded into binaries (mostly for --version output).
Without it, most binaries need to relink after every single
commit, even if they didn't change otherwise (due to, say,
a documentation-only commit).
LLVM_APPEND_VC_REV is ON by default, so this doesn't change the
default behavior of anything.
With this, all clients of GenerateVersionFromVCS.cmake honor
LLVM_APPEND_VC_REV.
Differential Revision: https://reviews.llvm.org/D72855
$URL$ is an SVN keyword substitution enabled via
`svn propset svn:keywords "URL" tools/clang/lib/Basic/Version.cpp`.
Now that we no longer use SVN, it's no longer being replaced by
anything, and we no longer offer svn exports. So remove the
$URL$-specific logic.
The "cfe" path prefix removal also no longer makes sense now that
we're on git: Both CLANG_REPOSITORY and LLVM_REPOSITORY are usually
set to https://github.com/llvm/llvm-project.git
So remove that too, and remove the "llvm" prefix removal for symmetry.
With the github url, "llvm" _is_ found in the string, but not in
the place the function expected. Nobody noticed since the llvm
repository path is only used if CLANG_REVISION and LLVM_REVISION are
different, which in the git monorepo world they never should be.
(I might remove the "// Support LLVM in a separate repository"
block in a separate commit.)
Differential Revision: https://reviews.llvm.org/D72848
Follow-up of D72014. It is more appropriate to use a target
feature instead of a SubTypeArch to express the difference.
Reviewed By: #powerpc, jhibbits
Differential Revision: https://reviews.llvm.org/D72433
Summary:
This allows the use of '-target powerpcspe-unknown-linux-gnu' or
'powerpcspe-unknown-freebsd' to be used, instead of
'-target powerpc-unknown-linux-gnu -mspe'.
Reviewed By: dim
Differential Revision: https://reviews.llvm.org/D72014
Summary:
Every powerpc64le platform uses elfv2.
For powerpc64, the environments "elfv1" and "elfv2" were added for
FreeBSD ELFv1->ELFv2 migration in D61950. FreeBSD developers have
decided to use OS versions to select ABI, and no one is relying on the
environments.
Also use elfv2 on powerpc64-linux-musl.
Users can always use -mabi=elfv1 and -mabi=elfv2 to override the default
ABI.
Reviewed By: adalava
Differential Revision: https://reviews.llvm.org/D72352
This removes the OpenMPProcBindClauseKind enum in favor of
llvm::omp::ProcBindKind which lives in OpenMPConstants.h and was
introduced in D70109.
No change in behavior is expected.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D70289
The validateOutputSize and validateInputSize need to check whether
AVX or AVX512 are enabled. But this can be affected by the
target attribute so we need to factor that in.
This patch moves some of the code from CodeGen to create an
appropriate feature map that we can pass to the function.
Differential Revision: https://reviews.llvm.org/D68627
Commit d77ae1552f
("[DebugInfo] Support to emit debugInfo for extern variables")
added deebugInfo for extern variables for BPF target.
The commit is reverted by 891e25b02d
as the committed tests using %clang instead of %clang_cc1 causing
test failed in certain scenarios as reported by Reid Kleckner.
This patch fixed the tests by using %clang_cc1.
Differential Revision: https://reviews.llvm.org/D71818
getLastArgIntValue is a useful utility function to get command line argument as an integer.
Currently it is in Frontend so that it can only be used by clang -cc1. Move it to basic so
that it can also be used by clang driver.
Differential Revision: https://reviews.llvm.org/D71080
In the current implementation of clang the canonicalization of paths in
diagnostic messages (when using -fdiagnostics-absolute-paths) only works
if the symbolic link is in the directory part of the filename, not if
the file itself is a symbolic link to another file.
This patch adds support to canonicalize the complete path including the
file.
Reviewers: rsmith, hans, rnk, ikudrin
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D70527
Summary:
This adds parsing of the qualifiers __ptr32, __ptr64, __sptr, and __uptr and
lowers them to the corresponding address space pointer for 32-bit and 64-bit pointers.
(32/64-bit pointers added in https://reviews.llvm.org/D69639)
A large part of this patch is making these pointers ignore the address space
when doing things like overloading and casting.
https://bugs.llvm.org/show_bug.cgi?id=42359
Reviewers: rnk, rsmith
Subscribers: jholewinski, jvesely, nhaehnle, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D71039
Allow sending address spaces into diagnostics to simplify and improve
error reporting. Improved wording of diagnostics for address spaces
in overloading.
Tags: #clang
Differential Revision: https://reviews.llvm.org/D71111
According to OpenMP 5.0, if clause can be used in for simd directive. If
condition in the if clause if false, the non-vectorized version of the
loop must be executed.
Extern variable usage in BPF is different from traditional
pure user space application. Recent discussion in linux bpf
mailing list has two use cases where debug info types are
required to use extern variables:
- extern types are required to have a suitable interface
in libbpf (bpf loader) to provide kernel config parameters
to bpf programs.
https://lore.kernel.org/bpf/CAEf4BzYCNo5GeVGMhp3fhysQ=_axAf=23PtwaZs-yAyafmXC9g@mail.gmail.com/T/#t
- extern types are required so kernel bpf verifier can
verify program which uses external functions more precisely.
This will make later link with actual external function no
need to reverify.
https://lore.kernel.org/bpf/87eez4odqp.fsf@toke.dk/T/#m8d5c3e87ffe7f2764e02d722cb0d8cbc136880ed
This patch added clang support to emit debuginfo for extern variables
with a TargetInfo hook to enable it. The debuginfo for the
extern variable is emitted only if that extern variable is
referenced in the current compilation unit.
Currently, only BPF target enables to generate debug info for
extern variables. The emission of such debuginfo is disabled for C++
at this moment since BPF only supports a subset of C language.
Emission with C++ can be enabled later if an appropriate use case
is identified.
-fstandalone-debug permits us to see more debuginfo with the cost
of bloated binary size. This patch did not add emission of extern
variable debug info with -fstandalone-debug. This can be
re-evaluated if there is a real need.
Differential Revision: https://reviews.llvm.org/D70696
Summary:
The new OpenMPConstants.h is a location for all OpenMP related constants
(and helpers) to live.
This patch moves the directives there (the enum OpenMPDirectiveKind) and
rewires Clang to use the new location.
Initially part of D69785.
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim
Subscribers: jholewinski, ppenzin, penzn, llvm-commits, cfe-commits, jfb, guansong, bollu, hiraditya, mgorny
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69853
The validateOutputSize and validateInputSize need to check whether
AVX or AVX512 are enabled. But this can be affected by the
target attribute so we need to factor that in.
This patch copies some of the code from CodeGen to create an
appropriate feature map that we can pass to the function. Probably
need some refactoring here to share more code with Codegen. Is
there a good place to do that? Also need to support the cpu_specific
attribute as well.
Differential Revision: https://reviews.llvm.org/D68627
According to OpenMP 5.0, if clause can be used in for simd directive. If
condition in the if clause if false, the non-vectorized version of the
loop must be executed.
Summary:
The patch adds correct value of _MSVC_LANG to match with MSVC++ VS2019 /std:c++latest mode.
Bugzilla - Bug 43965
https://bugs.llvm.org/show_bug.cgi?id=43965
The value for a MS specific macro differs from Microsoft starting with VS2019 in /std:c++latest mode.
-bash-4.2$ cat msvclang.cpp
_MSVC_LANG
-bash-4.2$ cl /std:c++latest -E msvclang.cpp
Microsoft (R) C/C++ Optimizing Compiler Version 19.20.27508.1 for x64
Copyright (C) Microsoft Corporation. All rights reserved.
/std:c++latest is provided as a preview of language features from the latest C++
working draft, and we're eager to hear about bugs and suggestions for improvements.
However, note that these features are provided as-is without support, and subject
to changes or removal as the working draft evolves. See
https://go.microsoft.com/fwlink/?linkid=2045807 for details.
msvclang.cpp
201705L
-bash-4.2$ clang-cl /std:c++latest -E msvclang.cpp
201704L
Reviewers: rnk
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D70996
Currently, it is a modified version of the Itanium ABI, with the only
change being that constructors and destructors return 'this'.
Differential Revision: https://reviews.llvm.org/D70575
Summary:
Add support for vcadd_* family of intrinsics. This set of intrinsics is
available in Armv8.3-A.
The fp16 versions require the FP16 extension, which has been available
(opt-in) since Armv8.2-A.
Reviewers: t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D70862
Now Clang does not check that features required by built-in functions
are enabled. That causes errors in the backend reported in PR44018.
This patch fixes this bug by checking that required features
are enabled.
This should fix PR44018.
Differential Revision: https://reviews.llvm.org/D70808
We don't have a full sysroot yet, so for now we only include compiler
support and compiler-rt builtins, the rest of the runtimes will get
enabled later.
Differential Revision: https://reviews.llvm.org/D70477
This patch will add -mcpu=future into clang for PowerPC.
A CPU type is required for work that may possibly be enabled for some future
Power CPU. The CPU type future will serve that purpose. This patch introduces
no new functionality. It is an incremental patch on top of which Power PC work
for some future CPU can be done.
Differential Revision: https://reviews.llvm.org/D70262
According to OpenMP 5.0, if clause can be used in for simd directive. If
condition in the if clause if false, the non-vectorized version of the
loop must be executed.
With updates to various LLVM tools that use SpecialCastList.
It was tempting to use RealFileSystem as the default, but that makes it
too easy to accidentally forget passing VFS in clang code.
Summary:
This is a follow-up to 590f279c45, which
moved some of the callers to use VFS.
It turned out more code in Driver calls into real filesystem APIs and
also needs an update.
Reviewers: gribozavr2, kadircet
Reviewed By: kadircet
Subscribers: ormris, mgorny, hiraditya, llvm-commits, jkorous, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D70440
According to OpenMP 5.0, if clause can be used in simd directive. If
condition in the if clause if false, the non-vectorized version of the
loop must be executed.
Provides support for using r6-r11 as globally scoped
register variables. This requires a -ffixed-rN flag
in order to reserve rN against general allocation.
If for a given GRV declaration the corresponding flag
is not found, or the the register in question is the
target's FP, we fail with a diagnostic.
Differential Revision: https://reviews.llvm.org/D68862
8548 CPU is GCC's name for the e500v2, so accept this in clang. The
e500v2 doesn't support lwsync, so define __NO_LWSYNC__ for this as well,
as GCC does.
Differential Revision: https://reviews.llvm.org/D67787
As part of an audit of whether all errors are being reported from the
ASTReader, delay err_module_file_conflict if a diagnostic is already in
flight when it is hit. This required plumbing an extra argument through
the delayed diagnostic mechanics in DiagnosticsEngine.
Summary:
When downstream LLVM distributions (like AOSP) set the CLANG_VENDOR
cmake variable, the version string printed by the clang driver looks
like:
$ clang --version
[CLANG_VENDOR] clang version X.X.X ([CLANG_REPOSITORY_STRING] sha) (based on LLVM X.X.X)
Rather than the more standard:
$ clang --version
clang version X.X.X ([CLANG_REPOSITORY_STRING] sha)
Based on feedback the the version string is a little long, the trailing
"(based on LLVM X.X.X)" is redundant and makes less sense after moving
LLVM to the monorepo. And it is only added should vendors set the cmake
variable CLANG_VENDOR. Let's remove it.
Reviewers: jyknight, eli.friedman, rsmith, rjmccall, efriedma
Reviewed By: efriedma
Subscribers: arphaman, efriedma, cfe-commits, srhines
Tags: #clang
Differential Revision: https://reviews.llvm.org/D69925
All SSE capable CPUs have MMX. 3dnow implicitly enables MMX.
We have code that detects if sse is enabled and implicitly enables
MMX unless -mno-mmx is passed. So in most cases we were already
enabling MMX if march passed a CPU that supported SSE.
The exception to this is if you pass -march for a cpu supports SSE
and also pass -mno-sse. We should still enable MMX since its part
of the CPU capability.
Summary:
Review comments on {D68767} asked that this duplicated code in clang-format was moved to one central location that being SourceManager (where it had originally be copied from I assume)
Moved function into static function ContentCache::getInvalidBOM(...) - (closest class to where it was defined before)
Updated clang-format to call this static function
Added unit tests for said new function in BasicTests
Sorry not my normal code area so may have the wrong reviewers. (but your names were on the recent history)
Reviewers: bruno, arphaman, klimek, owenpan, mitchell-stellar, dexonsmith
Reviewed By: owenpan
Subscribers: cfe-commits
Tags: #clang, #clang-format, #clang-tools-extra
Differential Revision: https://reviews.llvm.org/D68914
Summary:
Use a forward declaration of DataLayout instead of including
DataLayout.h in clangs TargetInfo.h. This reduces include
dependencies toward DataLayout.h (and other headers such as
DerivedTypes.h, Type.h that is included by DataLayout.h).
Needed to move implemantation of TargetInfo::resetDataLayout
from TargetInfo.h to TargetInfo.cpp.
Reviewers: rnk
Reviewed By: rnk
Subscribers: jvesely, nhaehnle, cfe-commits, llvm-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D69262
llvm-svn: 375438
Added parsing/sema/codegen support for 'parallel master taskloop'
constructs. Some of the clauses, like 'grainsize', 'num_tasks', 'final'
and 'priority' are not supported in full, only constant expressions can
be used currently in these clauses.
llvm-svn: 374791
The recently announced IBM z15 processor implements the architecture
already supported as "arch13" in LLVM. This patch adds support for
"z15" as an alternate architecture name for arch13.
Corrsponding LLVM support was committed as rev. 372435.
llvm-svn: 372436
RISC-V LLVM was only implement small/medlow code model, so it defined
__riscv_cmodel_medlow directly without check.
Now, we have medium/medany code model in RISC-V back-end, it should
define according the actually code model.
Reviewed By: lewis-revill
Differential Revision: https://reviews.llvm.org/D67065
llvm-svn: 372078
r371875 moved some functionality around to a Basic header file, but
didn't move its definitions as well. This patch moves some things
around so that shared library building can work.
llvm-svn: 371985
A number of inline assembly constraints are currently supported by LLVM, but rejected as invalid by Clang:
Target independent constraints:
s: An integer constant, but allowing only relocatable values
ARM specific constraints:
j: An immediate integer between 0 and 65535 (valid for MOVW)
x: A 32, 64, or 128-bit floating-point/SIMD register: s0-s15, d0-d7, or q0-q3
N: An immediate integer between 0 and 31 (Thumb1 only)
O: An immediate integer which is a multiple of 4 between -508 and 508. (Thumb1 only)
This patch adds support to Clang for the missing constraints along with some checks to ensure that the constraints are used with the correct target and Thumb mode, and that immediates are within valid ranges (at least where possible). The constraints are already implemented in LLVM, but just a couple of minor corrections to checks (V8M Baseline includes MOVW so should work with 'j', 'N' and 'O' shouldn't be valid in Thumb2) so that Clang and LLVM are in line with each other and the documentation.
Differential Revision: https://reviews.llvm.org/D65863
Change-Id: I18076619e319bac35fbb60f590c069145c9d9a0a
llvm-svn: 371079
Summary:
r337347 added support for the Signal Processing Engine (SPE) to LLVM.
This follows that up with the clang side.
This adds -mspe and -mno-spe, to match GCC.
Subscribers: nemanjai, kbarton, cfe-commits
Differential Revision: https://reviews.llvm.org/D49754
llvm-svn: 371066
Summary:
GCC seperates the `__riscv_float_abi_*` macros and the
`__riscv_abi_rve` macro. If the chosen abi is ilp32e, `gcc -march=rv32i
-mabi=ilp32i -E -dM` shows that both `__riscv_float_abi_soft` and
`__riscv_abi_rve` are set.
This patch corrects the compiler logic around these defines.
At the moment, this patch will not change clang's behaviour, because we do not
accept the `ilp32e` abi yet.
Reviewers: luismarques, asb
Reviewed By: luismarques
Subscribers: rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D66591
llvm-svn: 370709
accessed name to the directory entry
This commit introduces a parallel API that returns a DirectoryEntryRef
to the FileManager, similar to the parallel FileEntryRef API. All
uses will have to be update in follow-up patches. The immediate use of the new API in this
patch fixes the issue where a file manager was reused in clang-scan-deps,
but reported an different file path whenever a framework lookup was done through a symlink.
Differential Revision: https://reviews.llvm.org/D67026
llvm-svn: 370562
If contents of a file that is part of a PCM are overridden when reading
it, but weren't overridden when the PCM was being built, the ASTReader
will emit an error. Now it creates a separate FileEntry for recovery,
bypassing the overridden content instead of discarding it. The
pre-existing testcase clang/test/PCH/remap-file-from-pch.cpp confirms
that the new recovery method works correctly.
This resolves a long-standing FIXME to avoid hypothetically invalidating
another precompiled module that's already using the overridden contents.
This also removes ContentCache-related API that would be unsafe to use
across `CompilerInstance`s in an implicit modules build. This helps to
unblock us sinking it from SourceManager into FileManager in the future,
which would allow us to delete `InMemoryModuleCache`.
https://reviews.llvm.org/D66710
llvm-svn: 370546
-Deprecate -mmpx and -mno-mpx command line options
-Remove CPUID detection of mpx for -march=native
-Remove MPX from all CPUs
-Remove MPX preprocessor define
I've left the "mpx" string in the backend so we don't fail on old IR, but its not connected to anything.
gcc has also deprecated these command line options. https://www.phoronix.com/scan.php?page=news_item&px=GCC-Patch-To-Drop-MPX
Differential Revision: https://reviews.llvm.org/D66669
llvm-svn: 370393
Summary: This ensures that libcalls aren't generated when the target supports atomics. Atomics aren't in the base RV32I/RV64I instruction sets, so MaxAtomicInlineWidth and MaxAtomicPromoteWidth are set only when the atomics extension is being targeted. This must be done in setMaxAtomicWidth, as this should be done after handleTargetFeatures has been called.
Reviewers: jfb, jyknight, wmi, asb
Reviewed By: asb
Subscribers: pzheng, MaskRay, s.egerton, lenary, dexonsmith, psnobl, benna, Jim, JohnLLVM, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, lewis-revill, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D57450
llvm-svn: 370073
Refactor ContentCache::IsSystemFile to IsFileVolatile, checking
SourceManager::userFilesAreVolatile at construction time. This is a
step toward lowering ContentCache down from SourceManager to
FileManager.
No functionality change intended.
https://reviews.llvm.org/D66713
llvm-svn: 369958
`FileManager::getFileRef` is a modern API which we expect to convert to
over time. We should modernize the error handling as well, using
`llvm::Expected` instead of `llvm::ErrorOr`, to help clients that care
about errors to ensure nothing is missed.
However, not all clients care. I've also added another path for those
that don't:
- `FileEntryRef` is now copy- and move-assignable (using a pointer
instead of a reference).
- `FileManager::getOptionalFileRef` returns an `llvm::Optional` instead
of `llvm::Expected`.
- Added an `llvm::expectedToOptional` utility in case this is useful
elsewhere.
https://reviews.llvm.org/D66705
llvm-svn: 369943
Summary:
Clang performs various recursive operations (such as template instantiation),
and may use non-trivial amounts of stack space in each recursive step (for
instance, due to recursive AST walks). While we try to keep the stack space
used by such steps to a minimum and we have explicit limits on the number of
such steps we perform, it's impractical to guarantee that we won't blow out the
stack on deeply recursive template instantiations on complex ASTs, even with
only a moderately high instantiation depth limit.
The user experience in these cases is generally terrible: we crash with
no hint of what went wrong. Under this patch, we attempt to do better:
* Detect when the stack is nearly exhausted, and produce a warning with a
nice template instantiation backtrace, telling the user that we might
run slowly or crash.
* For cases where we're forced to trigger recursive template
instantiation in arbitrarily-deeply-nested contexts, check whether
we're nearly out of stack space and allocate a new stack (by spawning
a new thread) after producing the warning.
Reviewers: rnk, aaron.ballman
Subscribers: mgorny, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D66361
llvm-svn: 369940
construct.
OpenMP 5.0 introduced new clause for declare target directive, device_type clause, which may accept values host, nohost, and any. Host means
that the function must be emitted only for the host, nohost - only for
the device, and any - for both, device and the host.
llvm-svn: 369775
when the FileManager is reused across invocations
This commit introduces a parallel API to FileManager's getFile: getFileEntryRef, which returns
a reference to the FileEntry, and the name that was used to access the file. In the case of
a VFS with 'use-external-names', the FileEntyRef contains the external name of the file,
not the filename that was used to access it.
The new API is adopted only in the HeaderSearch and Preprocessor for include file lookup, so that the
accessed path can be propagated to SourceManager's FileInfo. SourceManager's FileInfo now can report this accessed path, using
the new getName method. This API is then adopted in the dependency collector, which now correctly reports dependencies when a file
is included both using a symlink and a real path in the case when the FileManager is reused across multiple Preprocessor invocations.
Note that this patch does not fix all dependency collector issues, as the same problem is still present in other cases when dependencies
are obtained using FileSkipped, InclusionDirective, and HasInclude. This will be fixed in follow-up commits.
Differential Revision: https://reviews.llvm.org/D65907
llvm-svn: 369680
I noticed that SourceManager::translateFile has code that doesn't really make sense.
In particular, if it fails to find a FileID by comparing FileEntry * values, it tries to
look through files that have the same filename, to see if they have a matching inode to try to
find the right FileID. However, the inode comparison seem redundant, as Clang's FileManager
already deduplicates FileEntry * values by inode.
Thus the comparisons between inodes should never actually succeed, and the comparison between FileEntry * values should be sufficient here.
Differential Revision: https://reviews.llvm.org/D65481
llvm-svn: 369585
Push LR register before calling __gnu_mcount_nc as it expects the value of LR register to be the top value of
the stack on ARM32.
Differential Revision: https://reviews.llvm.org/D65019
llvm-svn: 369147
This allows the constraint A to be used in inline asm for RISC-V, which
allows an address held in a register to be used.
This patch adds the minimal amount of code required to get operands with
the right constraints to compile.
Differential Revision: https://reviews.llvm.org/D54295
llvm-svn: 369093
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
Differential revision: https://reviews.llvm.org/D66259
llvm-svn: 368942
Only honour format_arg attributes on -[NSBundle localizedStringForKey] when its
argument has a format specifier in it, otherwise its likely to just be a key to
fetch localized strings.
Fixes rdar://23622446
Differential revision: https://reviews.llvm.org/D27165
llvm-svn: 368878
Support -march=tigerlake for x86.
Compare with Icelake Client, It include 4 more new features ,they are
avx512vp2intersect, movdiri, movdir64b, shstk.
Patch by Xiang Zhang (xiangzhangllvm)
Differential Revision: https://reviews.llvm.org/D65840
llvm-svn: 368543
This patch adds the SVE built-in types defined by the Procedure Call
Standard for the Arm Architecture:
https://developer.arm.com/docs/100986/0000
It handles the types in all relevant places that deal with built-in types.
At the moment, some of these places bail out with an error, including:
(1) trying to generate LLVM IR for the types
(2) trying to generate debug info for the types
(3) trying to mangle the types using the Microsoft C++ ABI
(4) trying to @encode the types in Objective C
(1) and (2) are fixed by follow-on patches but (unlike this patch)
they deal mostly with target-specific LLVM details, so seemed like
a logically separate change. There is currently no spec for (3) and
(4), so reporting an error seems like the correct behaviour for now.
The intention is that the types will become sizeless types:
http://lists.llvm.org/pipermail/cfe-dev/2019-June/062523.html
The main purpose of the sizeless type extension is to diagnose
impossible or dangerous uses of the types, such as any that would
require sizeof to have a meaningful defined value.
Until then, the patch sets the alignments of the types to the values
specified in the link above. It also sets the sizes of the types to
zero, which is chosen to be consistently wrong and shouldn't affect
correctly-written code (i.e. code that would compile even with the
sizeless type extension).
The patch adds the common subset of functionality needed to test the
sizeless type extension on the one hand and to provide SVE intrinsic
functions on the other. After this patch, the two pieces of work are
essentially independent.
The patch is based on one by Graham Hunter:
https://reviews.llvm.org/D59245
Differential Revision: https://reviews.llvm.org/D62960
llvm-svn: 368413
Summary:
The maximum alignment used by ARM arch
is 64bits, not 128.
This could cause overaligned memory
access for 128 bit neon vector that
have unpredictable behaviour.
This fixes: https://bugs.llvm.org/show_bug.cgi?id=42668
Reviewers: ostannard, dmgreen, srhines, danalbert, pirama, peter.smith
Reviewed By: pirama, peter.smith
Subscribers: phosek, thegameg, thakis, llvm-commits, carwil, peter.smith, javed.absar, kristof.beyls, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D65000
llvm-svn: 368288
This patch is a prerequisite for using LangStandard from Driver in
https://reviews.llvm.org/D64793.
It moves LangStandard* and InputKind::Language to Basic. It is mostly
mechanical, with only a few changes of note:
- enum Language has been changed into enum class Language : uint8_t to
avoid a clash between OpenCL in enum Language and OpenCL in enum
LangFeatures and not to increase the size of class InputKind.
- Now that getLangStandardForName, which is currently unused, also checks
both canonical and alias names, I've introduced a helper getLangKind
which factors out a code pattern already used 3 times.
The patch has been tested on x86_64-pc-solaris2.11, sparcv9-sun-solaris2.11,
and x86_64-pc-linux-gnu.
There's a companion patch for lldb which uses LangStandard.h
(https://reviews.llvm.org/D65717).
While polly includes isl which in turn uses InputKind::C, that part of the
code isn't even built inside the llvm tree. I've posted a patch to allow
for both InputKind::C and Language::C upstream
(https://groups.google.com/forum/#!topic/isl-development/6oEvNWOSQFE).
Differential Revision: https://reviews.llvm.org/D65562
llvm-svn: 367864
Update the callers of FileManager::getFile and FileManager::getDirectory to handle the new llvm::ErrorOr-returning methods.
Signed-off-by: Harlan Haskins <harlan@apple.com>
llvm-svn: 367616
Previously, the FileManager would use NULL returns to signify whether a file existed, but that doesn’t cover permissions issues or anything else that might occur while trying to stat or read a file. Instead, convert getFile and getDirectory into returning llvm::ErrorOr
Signed-off-by: Harlan Haskins <harlan@apple.com>
llvm-svn: 367615
Previously pragma annotation tokens were described as any other
annotations in TokenKinds.def. This change introduces special macro
PRAGMA_ANNOTATION for the pragma descriptions. It allows implementing
checks that deal with pragma annotations only.
Differential Revision: https://reviews.llvm.org/D65405
llvm-svn: 367575
Summary:
This adds the 'f' inline assembly constraint, as supported by GCC. An
'f'-constrained operand is passed in a floating point register. Exactly
which kind of floating-point register (32-bit or 64-bit) is decided
based on the operand type and the available standard extensions (-f and
-d, respectively).
This patch adds support in both the clang frontend, and LLVM itself.
Reviewers: asb, lewis-revill
Reviewed By: asb
Subscribers: hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D65500
llvm-svn: 367403
This adds support for parsing/emitting in IR the floating-point RISC-V
registers in inline assembly clobber lists.
Differential Revision: https://reviews.llvm.org/D64737
llvm-svn: 367399
make check-all currently fails on x86_64-pc-solaris2.11 when building with GCC 9:
Undefined first referenced
symbol in file
_ZN11__sanitizer14internal_lseekEimi SANITIZER_TEST_OBJECTS.sanitizer_libc_test.cc.i386.o
_ZN11__sanitizer23MapWritableFileToMemoryEPvmim SANITIZER_TEST_OBJECTS.sanitizer_libc_test.cc.i386.o
ld: fatal: symbol referencing errors
clang-9: error: linker command failed with exit code 1 (use -v to see invocation)
make[3]: *** [projects/compiler-rt/lib/sanitizer_common/tests/CMakeFiles/TSanitizer-i386-Test.dir/build.make:92: projects/compiler-rt/lib/sanitizer_common/tests/Sanitizer-i386-Test] Error 1
While e.g. __sanitizer::internal_lseek is defined in sanitizer_solaris.cc, g++ 9
predefines _FILE_OFFSET_BITS=64 while clang++ currently does not.
This patch resolves this inconsistency by following the gcc lead, which allows
make check-all to finish successfully.
There's one caveat: gcc defines _LARGEFILE_SOURCE and _LARGEFILE64_SOURCE for C++ only, while clang has long been doing it for
all languages. I'd like to keep it this way because those macros do is to make
declarations of fseek/ftello (_LARGEFILE_SOURCE) resp. the 64-bit versions
of largefile functions (*64 with _LARGEFILE64_SOURCE) visible additionally.
However, _FILE_OFFSET_BITS=64 changes all affected functions to be largefile-aware.
I'd like to restrict this to C++, just like gcc does.
To avoid a similar inconsistence with host compilers that don't predefine _FILE_OFFSET_BITS=64
(e.g. clang < 9, gcc < 9), this needs a compantion patch https://reviews.llvm.org/D64483.
Tested on x86_64-pc-solaris2.11.
Differential Revision: https://reviews.llvm.org/D64482
llvm-svn: 367305
The Arm C Language Extensions for SVE document specifies that
__ARM_FEATURE_SVE should be set when the compiler supports SVE and
implements all the extensions described in the document.
This is currently not yet the case, so the feature should be disabled
until the compiler can provide all the extensions as described.
Reviewers: c-rhodes, rengolin, rovka, ktkachov
Reviewed By: rengolin
Differential Revision: https://reviews.llvm.org/D65404
llvm-svn: 367301
The maximum alignment used by ARM arch
is 64bits, not 128.
This could cause overaligned memory
access for 128 bit neon vector that
have unpredictable behaviour.
This fixes: https://bugs.llvm.org/show_bug.cgi?id=42668
Patch by: Diogo Sampaio(diogo.sampaio@arm.com)
Differential Revision: https://reviews.llvm.org/D65000
Change-Id: I5a62b766491f15dd51e4cfe6625929db897f67e3
llvm-svn: 367119
This seems to be an old vestage of a previous implementation of getting
the default calling convention, and everything is now using
CXXABI/ASTContext's getDefaultCallingConvention. Remove it, since it
isn't doing anything.
llvm-svn: 367039
Adds the SVE vector and predicate registers to the list of known registers.
Patch by Kerry McLaughlin.
Reviewers: erichkeane, sdesmalen, rengolin
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D64739
llvm-svn: 366878
Clang :: Headers/max_align.c currently FAILs on 64-bit SPARC:
error: 'error' diagnostics seen but not expected:
File /vol/llvm/src/clang/dist/test/Headers/max_align.c Line 12: static_assert failed due to requirement '8 == _Alignof(max_align_t)' ""
1 error generated.
This happens because SuitableAlign isn't defined for SPARCv9 unlike SPARCv8
(which uses the default of 64 bits). gcc's sparc/sparc.h has
#define BIGGEST_ALIGNMENT (TARGET_ARCH64 ? 128 : 64)
This patch sets SuitableAlign to match and updates the corresponding testcase.
Tested on sparcv9-sun-solaris2.11.
Differential Revision: https://reviews.llvm.org/D64487
llvm-svn: 366820
The RISC-V hard float calling convention requires the frontend to:
* Detect cases where, once "flattened", a struct can be passed using
int+fp or fp+fp registers under the hard float ABI and coerce to the
appropriate type(s)
* Track usage of GPRs and FPRs in order to gate the above, and to
determine when signext/zeroext attributes must be added to integer
scalars
This patch attempts to do this in compliance with the documented ABI,
and uses ABIArgInfo::CoerceAndExpand in order to do this. @rjmccall, as
author of that code I've tagged you as reviewer for initial feedback on
my usage.
Note that a previous version of the ABI indicated that when passing an
int+fp struct using a GPR+FPR, the int would need to be sign or
zero-extended appropriately. GCC never did this and the ABI was changed,
which makes life easier as ABIArgInfo::CoerceAndExpand can't currently
handle sign/zero-extension attributes.
Re-landed after backing out 366450 due to missed hunks.
Differential Revision: https://reviews.llvm.org/D60456
llvm-svn: 366480
The RISC-V hard float calling convention requires the frontend to:
* Detect cases where, once "flattened", a struct can be passed using
int+fp or fp+fp registers under the hard float ABI and coerce to the
appropriate type(s) * Track usage of GPRs and FPRs in order to gate the
above, and to
determine when signext/zeroext attributes must be added to integer
scalars
This patch attempts to do this in compliance with the documented ABI,
and uses ABIArgInfo::CoerceAndExpand in order to do this. @rjmccall, as
author of that code I've tagged you as reviewer for initial feedback on
my usage.
Note that a previous version of the ABI indicated that when passing an
int+fp struct using a GPR+FPR, the int would need to be sign or
zero-extended appropriately. GCC never did this and the ABI was changed,
which makes life easier as ABIArgInfo::CoerceAndExpand can't currently
handle sign/zero-extension attributes.
Differential Revision: https://reviews.llvm.org/D60456
llvm-svn: 366450
The jcvt intrinsic defined in ACLE [1] is available when ARM_FEATURE_JCVT is defined.
This change introduces the AArch64 intrinsic, wires it up to the instruction and a new clang builtin function.
The __ARM_FEATURE_JCVT macro is now defined when an Armv8.3-A or higher target is used.
I've implemented the target detection logic in Clang so that this feature is enabled for architectures from armv8.3-a onwards (so -march=armv8.4-a also enables this, for example).
make check-all didn't show any new failures.
[1] https://developer.arm.com/docs/101028/latest/data-processing-intrinsics
Differential Revision: https://reviews.llvm.org/D64495
llvm-svn: 366197
gcc PowerPC supports 3 representations of long double:
* -mlong-double-64
long double has the same representation of double but is mangled as `e`.
In clang, this is the default on AIX, FreeBSD and Linux musl.
* -mlong-double-128
2 possible 128-bit floating point representations:
+ -mabi=ibmlongdouble
IBM extended double format. Mangled as `g`
In clang, this is the default on Linux glibc.
+ -mabi=ieeelongdouble
IEEE 754 quadruple-precision format. Mangled as `u9__ieee128` (`U10__float128` before gcc 8.2)
This is currently unavailable.
This patch adds -mabi=ibmlongdouble and -mabi=ieeelongdouble, and thus
makes the IEEE 754 quadruple-precision long double available for
languages supported by clang.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D64283
llvm-svn: 366044
Some targets such as Python 2.7.16 still use VERSION in
their builds. Without VERSION defined, the source code
has syntax errors.
Reverting as it will probably break many other things.
Noticed by Sterling Augustine
llvm-svn: 365992
Summary:
It has been introduced in 2011 for gcc compat:
ad1a4c6e89
it is probably time to remove it
Reviewers: rnk, dexonsmith
Reviewed By: rnk
Subscribers: dschuff, aheejin, fedor.sergeev, arphaman, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D64062
llvm-svn: 365962
This patch series adds support for the next-generation arch13
CPU architecture to the SystemZ backend.
This includes:
- Basic support for the new processor and its features.
- Support for low-level builtins mapped to new LLVM intrinsics.
- New high-level intrinsics in vecintrin.h.
- Indicate support by defining __VEC__ == 10303.
Note: No currently available Z system supports the arch13
architecture. Once new systems become available, the
official system name will be added as supported -march name.
llvm-svn: 365933
This patch makes the driver option -mlong-double-128 available for X86
and PowerPC. The CC1 option -mlong-double-128 is available on all targets
for users to test on unsupported targets.
On PowerPC, -mlong-double-128 uses the IBM extended double format
because we don't support -mabi=ieeelongdouble yet (D64283).
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D64277
llvm-svn: 365866
These macro definitions don't depend on the template parameter, so they
don't need to be part of the template. Move them to a .cpp file.
llvm-svn: 365556
In gcc PowerPC, long double has 3 mangling schemes:
-mlong-double-64: `e`
-mlong-double-128 -mabi=ibmlongdouble: `g`
-mlong-double-128 -mabi=ieeelongdouble: `u9__ieee128` (gcc <= 8.1: `U10__float128`)
The current useFloat128ManglingForLongDouble() bisection is not suitable
when we support -mlong-double-128 in clang (D64277). Replace
useFloat128ManglingForLongDouble() with getLongDoubleMangling() and
getFloat128Mangling() to allow 3 mangling schemes.
I also deleted the `getTriple().isOSBinFormatELF()` check (the Darwin
support has gone: https://reviews.llvm.org/D50988).
For x86, change the mangled code of __float128 from `U10__float128` to `g`. `U10__float128` was wrongly copied from PowerPC.
The test will be added to `test/CodeGen/x86-long-double.cpp` in D64277.
Reviewed By: erichkeane
Differential Revision: https://reviews.llvm.org/D64276
llvm-svn: 365480
-mlong-double-64 is supported on some ports of gcc (i386, x86_64, and ppc{32,64}).
On many other targets, there will be an error:
error: unrecognized command line option '-mlong-double-64'
This patch makes the driver option -mlong-double-64 available for x86
and ppc. The CC1 option -mlong-double-64 is available on all targets for
users to test on unsupported targets.
LongDoubleSize is added as a VALUE_LANGOPT so that the option can be
shared with -mlong-double-128 when we support it in clang.
Also, make powerpc*-linux-musl default to use 64-bit long double. It is
currently the only supported ABI on musl and is also how people
configure powerpc*-linux-musl-gcc.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D64067
llvm-svn: 365412
Summary:
"ww" and "ws" are both constraint codes for VSX vector registers that
hold scalar double data. "ww" is preferred for float while "ws" is
preferred for double.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D64119
llvm-svn: 365106
"To" selects an odd-numbered GPR, and "Te" an even one. There are some
8.1-M instructions that have one too few bits in their register fields
and require registers of particular parity, without necessarily using
a consecutive even/odd pair.
Also, the constraint letter "t" should select an MVE q-register, when
MVE is present. This didn't need any source changes, but some extra
tests have been added.
Reviewers: dmgreen, samparker, SjoerdMeijer
Subscribers: javed.absar, eraman, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D60709
llvm-svn: 364331
crashing.
Ideally we wouldn't care about the size of a file so long as it fits in
memory, but in practice we have lots of hardocded assumptions that
unsigned can be used to index files, string literals, and so on.
llvm-svn: 364103
error: 'error' diagnostics expected but not seen:
File /vol/llvm/src/clang/local/test/Sema/wchar.c Line 22: initializing wide char array with non-wide string literal
error: 'error' diagnostics seen but not expected:
File /vol/llvm/src/clang/local/test/Sema/wchar.c Line 20: array initializer must be an initializer list
File /vol/llvm/src/clang/local/test/Sema/wchar.c Line 22: array initializer must be an initializer list
It turns out the definition is wrong, as can be seen in GCC's gcc/config/sol2.h:
/* wchar_t is called differently in <wchar.h> for 32 and 64-bit
compilations. This is called for by SCD 2.4.1, p. 6-83, Figure 6-65
(32-bit) and p. 6P-10, Figure 6.38 (64-bit). */
#undef WCHAR_TYPE
#define WCHAR_TYPE (TARGET_64BIT ? "int" : "long int")
The following patch implements this, and at the same time corrects the wint_t
definition which is the same:
/* Same for wint_t. See SCD 2.4.1, p. 6-83, Figure 6-66 (32-bit). There's
no corresponding 64-bit definition, but this is what Solaris 8
<iso/wchar_iso.h> uses. */
#undef WINT_TYPE
#define WINT_TYPE (TARGET_64BIT ? "int" : "long int")
Clang :: Preprocessor/wchar_t.c and Clang :: Sema/format-strings.c need to
be adjusted to account for that.
Tested on i386-pc-solaris2.11, x86_64-pc-solaris2.11, and x86_64-pc-linux-gnu.
Differential Revision: https://reviews.llvm.org/D62944
llvm-svn: 363612
ARM has a special target feature called soft-float-abi. This feature is
special, since we get it passed to us explicitly in the frontend, but
filter it out before it can land in any target feature strings in LLVM
IR.
__attribute__((target(""))) doesn't quite filter these features out
properly, so today, we get warnings about soft-float-abi being an
unknown feature from the backend.
This CL has us filter soft-float-abi out at a slightly different point,
so we don't end up passing these invalid features to the backend.
Differential Revision: https://reviews.llvm.org/D61750
llvm-svn: 363346
This allows the constraints I, J & K to be used in inline asm for
RISC-V, with the following semantics (equivalent to GCC):
I: Any 12-bit signed immediate.
J: Integer zero only.
K: Any 5-bit unsigned immediate.
See the GCC definitions here:
https://gcc.gnu.org/onlinedocs/gccint/Machine-Constraints.html
Differential Revision: https://reviews.llvm.org/D54091
llvm-svn: 363055
The recently added cooperlake CPU has made our already ugly switch statement even worse. There's a CPU exclusion list around the bf16 feature in the cooper lake block. I worry that we'll have to keep adding new CPUs to that until bf16 intercepts a client space CPU. We have several other exclusion lists in other parts of the switch due to skylakeserver, cascadelake, and cooperlake not having sgx. Another for cannonlake not having clwb but having all other features from skx.
This removes all these special ifs at the cost of some duplication of features and a goto. I've copied all of the skx features into either cannonlake or icelakeclient(for clwb). And pulled sklyakeserver, cascadelake, and cooperlake out of the main inheritance chain into their own chain. At the end of skylakeserver we merge back into the main chain at skylakeclient but below sgx. I think this is at least easier to follow.
Differential Revision: https://reviews.llvm.org/D63018
llvm-svn: 362965
If MVE is present at all, then the macro __ARM_FEATURE_MVE is defined
to a value which has bit 0 set for integer MVE, and bit 1 set for
floating-point MVE.
(Floating-point MVE implies integer MVE, so if this macro is defined
at all then it will be set to 1 or 3, never 2.)
Patch mostly by Simon Tatham
Differential Revision: https://reviews.llvm.org/D60710
llvm-svn: 362806
Change D60691 caused some knock-on failures that weren't caught by the
existing tests. Firstly, selecting a CPU that should have had a
restricted FPU (e.g. `-mcpu=cortex-m4`, which should have 16 d-regs
and no double precision) could give the unrestricted version, because
`ARM::getFPUFeatures` returned a list of features including subtracted
ones (here `-fp64`,`-d32`), but `ARMTargetInfo::initFeatureMap` threw
away all the ones that didn't start with `+`. Secondly, the
preprocessor macros didn't reliably match the actual compilation
settings: for example, `-mfpu=softvfp` could still set `__ARM_FP` as
if hardware FP was available, because the list of features on the cc1
command line would include things like `+vfp4`,`-vfp4d16` and clang
didn't realise that one of those cancelled out the other.
I've fixed both of these issues by rewriting `ARM::getFPUFeatures` so
that it returns a list that enables every FP-related feature
compatible with the selected FPU and disables every feature not
compatible, which is more verbose but means clang doesn't have to
understand the dependency relationships between the backend features.
Meanwhile, `ARMTargetInfo::handleTargetFeatures` is testing for all
the various forms of the FP feature names, so that it won't miss cases
where it should have set `HW_FP` to feed into feature test macros.
That in turn caused an ordering problem when handling `-mcpu=foo+bar`
together with `-mfpu=something_that_turns_off_bar`. To fix that, I've
arranged that the `+bar` suffixes on the end of `-mcpu` and `-march`
cause feature names to be put into a separate vector which is
concatenated after the output of `getFPUFeatures`.
Another side effect of all this is to fix a bug where `clang -target
armv8-eabi` by itself would fail to set `__ARM_FEATURE_FMA`, even
though `armv8` (aka Arm v8-A) implies FP-Armv8 which has FMA. That was
because `HW_FP` was being set to a value including only the `FPARMV8`
bit, but that feature test macro was testing only the `VFP4FPU` bit.
Now `HW_FP` ends up with all the bits set, so it gives the right
answer.
Changes to tests included in this patch:
* `arm-target-features.c`: I had to change basically all the expected
results. (The Cortex-M4 test in there should function as a
regression test for the accidental double-precision bug.)
* `arm-mfpu.c`, `armv8.1m.main.c`: switched to using `CHECK-DAG`
everywhere so that those tests are no longer sensitive to the order
of cc1 feature options on the command line.
* `arm-acle-6.5.c`: been updated to expect the right answer to that
FMA test.
* `Preprocessor/arm-target-features.c`: added a regression test for
the `mfpu=softvfp` issue.
Reviewers: SjoerdMeijer, dmgreen, ostannard, samparker, JamesNagurne
Reviewed By: ostannard
Subscribers: srhines, javed.absar, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62998
llvm-svn: 362791
Given the existing infrastructure in LLVM side for +fp and +fp.dp,
this is more or less trivial, needing only one tiny source change and
a couple of tests.
Patch by Simon Tatham.
Differential Revision: https://reviews.llvm.org/D60699
llvm-svn: 362096
Those two subtarget features were awkward because their semantics are
reversed: each one indicates the _lack_ of support for something in
the architecture, rather than the presence. As a consequence, you
don't get the behavior you want if you combine two sets of feature
bits.
Each SubtargetFeature for an FP architecture version now comes in four
versions, one for each combination of those options. So you can still
say (for example) '+vfp2' in a feature string and it will mean what
it's always meant, but there's a new string '+vfp2d16sp' meaning the
version without those extra options.
A lot of this change is just mechanically replacing positive checks
for the old features with negative checks for the new ones. But one
more interesting change is that I've rearranged getFPUFeatures() so
that the main FPU feature is appended to the output list *before*
rather than after the features derived from the Restriction field, so
that -fp64 and -d32 can override defaults added by the main feature.
Reviewers: dmgreen, samparker, SjoerdMeijer
Subscribers: srhines, javed.absar, eraman, kristof.beyls, hiraditya, zzheng, Petar.Avramovic, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D60691
llvm-svn: 361845
We had an if statement that checked over every avx512* feature to see if it should enabled avx512f. Since they are all prefixed with avx512 just check for that instead.
llvm-svn: 361557
Summary:
These features will both be implemented soon, so I thought I would
save time by adding the boilerplate for both of them at the same time.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62047
llvm-svn: 361516
Support the OpenCL C pipe feature in C++ for OpenCL mode, to preserve
backwards compatibility with OpenCL C.
Various changes had to be made in Parse and Sema to enable
pipe-specific diagnostics, so enable a SemaOpenCL test for C++.
Differential Revision: https://reviews.llvm.org/D62181
llvm-svn: 361382
Summary:
For big-endian powerpc64, the default ABI is ELFv1. OpenPower ABI ELFv2 is supported when -mabi=elfv2 is specified. FreeBSD support for PowerPC64 ELFv2 ABI with LLVM is in progress[1]. This patch adds an alternative way to specify ELFv2 ABI on target triple [2].
The following results are expected:
ELFv1 when using:
-target powerpc64-unknown-freebsd12.0
-target powerpc64-unknown-freebsd12.0 -mabi=elfv1
-target powerpc64-unknown-freebsd12.0-elfv1
ELFv2 when using:
-target powerpc64-unknown-freebsd12.0 -mabi=elfv2
-target powerpc64-unknown-freebsd12.0-elfv2
[1] https://wiki.freebsd.org/powerpc/llvm-elfv2
[2] https://clang.llvm.org/docs/CrossCompilation.html
Patch by Alfredo Dal'Ava Júnior!
Differential Revision: https://reviews.llvm.org/D61950
llvm-svn: 361355
Defines macro ARM_FEATURE_CMSE to 1 for v8-M targets and introduces
-mcmse option which for v8-M targets sets ARM_FEATURE_CMSE to 3.
A diagnostic is produced when the option is given on architectures
without support for Security Extensions.
Reviewed By: dmgreen, snidertm
Differential Revision: https://reviews.llvm.org/D59879
llvm-svn: 361261
Previously we were doing this so that the 256 bit selectw builtin could be used in the implementation of the 512->256 bit conversion intrinsic.
After this commit we now use a masked convert builtin that will emit the intrinsic call and the 256-bit select from custom code in CGBuiltin. Then the header only needs to call that one intrinsic.
llvm-svn: 360924
Summary:
- This patch checks the AIX version and defines the appropriate macros.
- Follow up to a comment on D59048.
Author: andusy
Reviewers: hubert.reinterpretcast, jasonliu, sfertile, xingxue
Reviewed By: sfertile
Subscribers: jsji, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D61530
llvm-svn: 360900
If a header file was processed for the second time, we could end up with a
wrong conditional stack and skipped ranges:
In the particular example, if the header guard is evaluated the second time and
it is decided to skip the conditional block, the corresponding "#endif" is
never seen since the preamble does not include it and we end up in the
Tok.is(tok::eof) case with a wrong conditional stack.
Detect the circular inclusion, emit a diagnostic and stop processing the
inclusion.
llvm-svn: 360418
Darwin if the version of libc++abi isn't new enough to include the fix
in r319123
This patch resurrects r264998, which was committed to work around a bug
in libc++abi that was causing _cxa_allocate_exception to return a memory
that wasn't double-word aligned.
http://lists.llvm.org/pipermail/cfe-commits/Week-of-Mon-20160328/154332.html
In addition, this patch makes clang issue a warning if the type of the
thrown object requires an alignment that is larger than the minimum
guaranteed by the target C++ runtime.
rdar://problem/49864414
Differential Revision: https://reviews.llvm.org/D61667
llvm-svn: 360404
This trips over a few other limitations, but in the interests of incremental development I'm starting here & I'll look at the issues with -verify and filesystem checks (the fact that the behavior depends on the existence of a 'foo' directory even though it shouldn't need it), etc.
Reviewers: rsmith
Differential Revision: https://reviews.llvm.org/D61656
llvm-svn: 360195
Summary:
1. Enable infrastructure of AVX512_BF16, which is supported for BFLOAT16 in Cooper Lake;
2. Enable intrinsics for VCVTNE2PS2BF16, VCVTNEPS2BF16 and DPBF16PS instructions, which are Vector Neural Network Instructions supporting BFLOAT16 inputs and conversion instructions from IEEE single precision.
For more details about BF16 intrinsic, please refer to the latest ISE document: https://software.intel.com/en-us/download/intel-architecture-instruction-set-extensions-programming-reference
Patch by LiuTianle
Reviewers: craig.topper, smaslov, LuoYuanke, wxiao3, annita.zhang, spatel, RKSimon
Reviewed By: craig.topper
Subscribers: mgorny, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D60552
llvm-svn: 360018
According to alignment section in below ARM64 ABI document, MSVC could increase
alignment of global data based on its total size. Clang doesn't do this. Compile
the same symbol into different alignments by Clang and MSVC could cause link
error because some instruction encodings, like 64-bit LDR/STR with immediate,
require the target to be 8 bytes aligned, and linker could choose code stream
with such LDR/STR instruction from MSVC and 4 bytes aligned data from Clang into
final image, which actually cannot be linked together
(see https://bugs.llvm.org/show_bug.cgi?id=41506 for more details).
https://docs.microsoft.com/en-us/cpp/build/arm64-windows-abi-conventions?view=vs-2019#alignment
Differential Revision: https://reviews.llvm.org/D61225
llvm-svn: 359744
This provides intrinsics support for Memory Tagging Extension (MTE),
which was introduced with the Armv8.5-a architecture.
These intrinsics are available when __ARM_FEATURE_MEMORY_TAGGING is defined.
Each intrinsic is described in detail in the ACLE Q1 2019 documentation:
https://developer.arm.com/docs/101028/latest
Reviewed By: Tim Nortover, David Spickett
Differential Revision: https://reviews.llvm.org/D60485
llvm-svn: 359348
"DefineStd(Builder, "bpf", Opts)" generates the following three
macros:
bpf
__bpf
__bpf__
and the macro "bpf" is due to the fact that the target language
is C which allows GNU extensions.
The name "bpf" could be easily used as variable name or type
field name. For example, in current linux kernel, there are
four places where bpf is used as a field name. If the corresponding
types are included in bpf program, the compilation error will
occur.
This patch removed predefined macro "bpf" as well as "__bpf" which
is rarely used if used at all.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D61173
llvm-svn: 359310
These builtins provide access to the new integer and
sub-integer variants of MMA (matrix multiply-accumulate) instructions
provided by CUDA-10.x on sm_75 (AKA Turing) GPUs.
Also added a feature for PTX 6.4. While Clang/LLVM does not generate
any PTX instructions that need it, we still need to pass it through to
ptxas in order to be able to compile code that uses the new 'mma'
instruction as inline assembly (e.g used by NVIDIA's CUTLASS library
https://github.com/NVIDIA/cutlass/blob/master/cutlass/arch/mma.h#L101)
Differential Revision: https://reviews.llvm.org/D60279
llvm-svn: 359248
Summary:
This patch implements `__builtin_is_constant_evaluated` as specifier by [P0595R2](https://wg21.link/p0595r2). It is built on the back of Bill Wendling's work for `__builtin_constant_p()`.
More tests to come, but early feedback is appreciated.
I plan to implement warnings for common mis-usages like those belowe in a following patch:
```
void foo(int x) {
if constexpr (std::is_constant_evaluated())) { // condition is always `true`. Should use plain `if` instead.
foo_constexpr(x);
} else {
foo_runtime(x);
}
}
```
Reviewers: rsmith, MaskRay, bruno, void
Reviewed By: rsmith
Subscribers: dexonsmith, zoecarver, fdeazeve, kristina, cfe-commits
Differential Revision: https://reviews.llvm.org/D55500
llvm-svn: 359067
Summary:
Previously, we would return true/false signifying if the cache/lookup
succeeded or failed. Instead, provide clients with the underlying error
that was thrown while attempting to look up in the cache.
Since clang::FileManager doesn't make use of this information, it discards the
error that's received and casts away to bool.
This change is NFC.
Reviewers: benlangmuir, arphaman
Subscribers: dexonsmith, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D60735
llvm-svn: 358509
Requires making the llvm::MemoryBuffer* stored by SourceManager const,
which in turn requires making the accessors for that return const
llvm::MemoryBuffer*s and updating all call sites.
The original motivation for this was to use it and fix the TODO in
CodeGenAction.cpp's ConvertBackendLocation() by using the UnownedTag
version of createFileID, and since llvm::SourceMgr* hands out a const
llvm::MemoryBuffer* this is required. I'm not sure if fixing the TODO
this way actually works, but this seems like a good change on its own
anyways.
No intended behavior change.
Differential Revision: https://reviews.llvm.org/D60247
llvm-svn: 357724
The Emscripten OS provides a definition of __EMSCRIPTEN__, and also that it
supports iprintf optimizations.
Also define small_printf optimizations, which is a printf with float support
but not long double (which in wasm can be useful since long doubles are 128
bit and force linking of float128 emulation code). This part is based on
sunfish's https://reviews.llvm.org/D57620 (which can't land yet since
the WASI integration isn't ready yet).
Differential Revision: https://reviews.llvm.org/D60167
llvm-svn: 357552
Summary:
This feature is not actually used for anything in the WebAssembly
backend, but adding it allows users to get it into the target features
sections of their objects, which makes these objects
future-compatible.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, jdoerfert, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D60013
llvm-svn: 357321
Use the new cx8 feature flag that was added to the backend to represent support for cmpxchg8b. Use this flag to set the MaxAtomicInlineWidth.
This also assumes all the cmpxchg instructions are enabled for CK_Generic which is what cc1 defaults to when nothing is specified.
Differential Revision: https://reviews.llvm.org/D59566
llvm-svn: 356709
PentiumPro has HasNOPL set in the backend. i686 does not.
Despite having a function that looks like it canonicalizes alias names. It
doesn't seem to be called. So I don't think this is a functional change. But its
good to be consistent between the backend and frontend.
llvm-svn: 356537
llvm-svn 356197 relanded previously failing test case max_align.c.
This commit will reland the rest of llvm-svn 356060 commit.
Differential Revision: https://reviews.llvm.org/D59048
llvm-svn: 356208
Summary:
This define should correspond to CMPXCHG16B being available which requires 64-bit mode.
I checked and gcc also seems to only define this in 64-bit mode.
Reviewers: RKSimon, spatel, efriedma, jyknight, jfb
Reviewed By: jfb
Subscribers: jfb, cfe-commits, llvm-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D59287
llvm-svn: 356118
This reverts commit r353765. After talking with our c stdlib folks, we decided
to use the existing pass_object_size attribute to implement _FORTIFY_SOURCE
wrappers, like Bionic does (I didn't realize that pass_object_size could be used
for this purpose). Sorry for the flip/flop, and thanks to James Y. Knight for
pointing this out to me.
llvm-svn: 356103
Summary:
A first pass over platform-specific properties of the C API/ABI
on AIX for both 32-bit and 64-bit modes.
This is a continuation of D18360 by Andrew Paprocki and further work by Wu Zhao.
Patch by Andus Yu
Reviewers: apaprocki, chandlerc, hubert.reinterpretcast, jasonliu,
xingxue, sfertile
Reviewed by: hubert.reinterpretcast, apaprocki, sfertile
Differential Revision: https://reviews.llvm.org/D59048
llvm-svn: 356060
Change MemoryBufferCache to InMemoryModuleCache, moving it from Basic to
Serialization. Another patch will start using it to manage module build
more explicitly, but this is split out because it's mostly mechanical.
Because of the move to Serialization we can no longer abuse the
Preprocessor to forward it to the ASTReader. Besides the rename and
file move, that means Preprocessor::Preprocessor has one fewer parameter
and ASTReader::ASTReader has one more.
llvm-svn: 355777
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355685
Since
commit 56f548bbbb7e4387a69708f70724d00e9e076153
[modules] Round-trip -Werror flag through explicit module build.
the behavior of CXTranslationUnit_KeepGoing changed:
Unresolved #includes are fatal errors again. As a consequence, some
templates are not instantiated and lead to confusing errors.
Revert to the old behavior: With CXTranslationUnit_KeepGoing fatal
errors are mapped to errors.
Patch by Nikolai Kosjar.
Differential Revision: https://reviews.llvm.org/D58501
llvm-svn: 355586
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355585
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355522
Summary:
This reverts rL352390 / D57280.
As discussed in https://reviews.llvm.org/D57112#inline-506781,
'flush' clause does not exist in the OpenMP spec, it can not be
specified, and `OMPFlushClause` class is just a helper class.
Now, here's the caveat. I have read @ABataev's
> Well, I think it would be good to filter out OMPC_flush somehow
> because there is no such clause actually, it is a pseudo clause
> for better handling of the flush directive.
as if that clause is pseudo clause that only exists for the sole
purpose of simplifying the parser. As in, it never reaches AST.
I did not however try to verify that. Too bad, i was wrong.
It absolutely *does* reach AST. Therefore my understanding/justification
for the change was flawed, which makes the patch a regression which **must** be reverted.
@gribozavr has brought that up again in https://reviews.llvm.org/D57112#inline-521238
> > ...
> Sorry to be late for this discussion, but I don't think this conclusion
> follows. ASTMatchers are supposed to match the AST as it is.
> Even if OMPC_flush is synthetic, it exists in the AST, and users might
> want to match it. I think users would find anything else (trying to filter
> out AST nodes that are not in the source code) to be surprising. For example,
> there's a matcher materializeTemporaryExpr even though this AST node is a
> Clang invention and is not a part of the C++ spec.
>
> Matching only constructs that appear in the source code is not feasible with
> ASTMatchers, because they are based on Clang's AST that exposes tons of semantic
> information, and its design is dictated by the structure of the semantic information.
> See "RFC: Tree-based refactorings with Clang" in cfe-dev for a library that will
> focus on representing source code as faithfully as possible.
>
> Not to even mention that this code is in ASTTypeTraits, a general library for
> handling AST nodes, not specifically for AST Matchers...
Reviewers: gribozavr, ABataev, rjmccall, aaron.ballman
Reviewed By: gribozavr, ABataev
Subscribers: dylanmckay, guansong, arphaman, jdoerfert, cfe-commits, gribozavr, ABataev
Tags: #clang, #openmp
Differential Revision: https://reviews.llvm.org/D58979
llvm-svn: 355486
This patch includes the necessary code for converting between a fixed point type and integer.
This also includes constant expression evaluation for conversions with these types.
Differential Revision: https://reviews.llvm.org/D56900
llvm-svn: 355462
Summary:
FileData was only ever used as a container for the values in
llvm::vfs::Status, so they might as well be consolidated.
The `InPCH` member was also always set to false, and unused.
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D58924
llvm-svn: 355368
Then, as a consequence, remove the complex set of workarounds for
initialization order -- which are apparently not 100% reliable.
The only downside is that some of the member functions are now
specific to kNumElem == 2, and will need to be updated if that
constant is increased in the future.
Unfortunately, the current code caused an initialization-order runtime
failure for me in some compilation modes. It appears that in a
toolchain without init-array enabled, the order of initialization of
static data members of a template can be reversed w.r.t. the order
within a file.
This caused e.g. SanitizerKind::CFI to be initialized to 0.
I'm not quite sure if that is an allowable ordering variation, or
nonconforming behavior, but in any case, making everything constexpr
eliminates the possibility of such an issue.
llvm-svn: 355278
enum SanitizerOrdinal has reached maximum capacity, this change extends the capacity to 128 sanitizer checks.
This can eventually allow us to add gcc 8's options "-fsanitize=pointer-substract" and "-fsanitize=pointer-compare".
This is a recommit of r354873 but with a fix for unqualified lookup error in lldb cmake build bot.
Fixes: https://llvm.org/PR39425
Differential Revision: https://reviews.llvm.org/D57914
llvm-svn: 355190
This patch enables the following
1) AMD family 17h "znver2" tune flag (-march, -mcpu).
2) ISAs that are enabled for "znver2" architecture.
3) For the time being, it uses the znver1 scheduler model.
4) Tests are updated.
5) This patch is the clang counterpart to D58343
Reviewers: craig.topper
Tags: #clang
Differential Revision: https://reviews.llvm.org/D58344
llvm-svn: 354899
Fangrui Song