Summary:
The gdb-remote async thread cannot modify thread state while the main thread
holds a lock on the state. Don't use locking thread iteration for bt all.
Specifically, the deadlock manifests when lldb attempts to JIT code to
symbolicate objective c while backtracing. As part of this code path,
SetPrivateState() is called on an async thread. This async thread will
block waiting for the thread_list lock held by the main thread in
CommandObjectIterateOverThreads. The main thread will also block on the
async thread during DoResume (although with a timeout), leading to a
deadlock. Due to the timeout, the deadlock is not immediately apparent,
but the inferior will be left in an invalid state after the bt all completes,
and objective-c symbols will not be successfully resolved in the backtrace.
Reviewers: andrew.w.kaylor, jingham, clayborg
Subscribers: sas, lldb-commits
Differential Revision: http://reviews.llvm.org/D18075
Change by Francis Ricci <fjricci@fb.com>
llvm-svn: 263735
the main reason is that our decorator contains extra fluff to "expect" crashes (which seem to
happen occasionaly on the android buildbot).
llvm-svn: 263633
Summary:
Some tests (Hc_then_Csignal_signals_correct_thread, at least) were sending a "continue" packet in
one expect_gdbremote_sequence invocation, and "expecting" the stop-reply in another call. This
posed a problem, because the were packets were not persisted between the two invocations, and if
the stub was exceptionally fast to respond, the packet would be received in the first invocation
(where it would be ignored) and then the second invocation would fail because it could not find
the packet.
Since doing matching in two invocations seems like a reasonable use of the packet pump, instead
of fixing the test, I make sure the packet_pump supports this usage by making the list of
captured packets persistent.
Reviewers: tfiala
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18140
llvm-svn: 263629
Summary:
This also adds a basic smoke test for linux core file reading. I'm checking in the core files as
well, so that the tests can run on all platforms. With some tricks I was able to produce
reasonably-sized core files (~40K).
This fixes the first part of pr26322.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18176
llvm-svn: 263628
Summary: These are not needed in lldb-server. Removing them shrinks the server size by about 1.5%.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18188
llvm-svn: 263625
This can cause differences in which bit patterns end up meaning YES or NO. In general, however, 0 == NO and 1 == YES.
To keep it simple, LLDB will now show "YES" and "NO" only for 1 and 0 respectively, and format other values as the plain numeric value instead.
Fixes rdar://24809994
llvm-svn: 263604
This fixes a recently reported a bug(https://llvm.org/bugs/show_bug.cgi?id=26790) relating to the clang expression evaluator no longer being able to resolve calls to
functions with arguments to typedefed anonymous structs, unions, or enums after a cleanup to the expression parsing code in r260768
This fixes the issue by attaching the tagged name to the original clang::TagDecl object when generating the typedef in lldb::ClangAstContext::CreateTypeDef.
This also fixes the issue for anonymous typedefs for non-struct types (unions and enums) where we have a tag name.
Author: Luke Drummond <luke.drummond@codeplay.com>
Differential Revision: http://reviews.llvm.org/D18099
llvm-svn: 263544
It would be nice to have a longer-term plan for how to handle help for regular expression commands, since their syntax is highly irregular. I can see a few options (*), but for now this is a reasonable stop-gag measure for the most blatant regression.
(*) the simplest is, of course, to detect a regex command and inherit the syntax for any aliases thereof; it would be nice if this also didn't show the underlying regex command name when the alias is used
llvm-svn: 263523
This cleans things up such CommandAlias essentially can work as its own object; the aliases still live in a separate map, but are now just full-fledged CommandObjectSPs
This patch also cleans up help generation for aliases, allows aliases to vend their own help, and adds a tweak such that "dash-dash aliases", such as po, don't show the list of options for their underlying command, since those can't be provided anyway
I plan to fix up a few more things here, and then add a test case and proclaim victory
llvm-svn: 263499
On FreeBSD _LIBCPP_EXTERN_TEMPLATE is being defined from something
included by lldb/lldb-private.h. Undefine it after the #include to avoid
the redefinition warning.
Differential Revision: http://reviews.llvm.org/D17402
llvm-svn: 263486
In r262970 this was changed from xfail Clang < 3.5 to > 3.5, but it
still fails on FreeBSD 10's system Clang 3.4.1 so assume it fails on
all versions.
llvm.org/pr26937
llvm-svn: 263467
Summary:
Normally, when the remote stub is not ready, we will get ECONNREFUSED during the connect()
attempt. However, due to the way how ADB forwarding works, on android targets the connect() will
always be successful, but the connection will be immediately dropped if ADB could not connect on
the remote side. This commit tries to detect this situation, and report it as "connection
refused" so that the upper test layers attempt the connection again.
Reviewers: tfiala, tberghammer
Subscribers: tberghammer, danalbert, srhines, lldb-commits
Differential Revision: http://reviews.llvm.org/D18146
llvm-svn: 263439
Build-id support is being added to lld and by default it may produce a
64-bit build-id.
Prior to this change lldb would reject such a build-id. However, it then
falls back to a 4-byte crc32, which is a poorer quality identifier.
Differential Revision: http://reviews.llvm.org/D18096
llvm-svn: 263432
Turns out that most of the code that runs expressions (e.g. the ObjC runtime grubber) on
behalf of the expression parser was using the currently selected thread. But sometimes,
e.g. when we are evaluating breakpoint conditions/commands, we don't select the thread
we're running on, we instead set the context for the interpreter, and explicitly pass
that to other callers. That wasn't getting communicated to these utility expressions, so
they would run on some other thread instead, and that could cause a variety of subtle and
hard to reproduce problems.
I also went through the commands and cleaned up the use of GetSelectedThread. All those
uses should have been trying the thread in the m_exe_ctx belonging to the command object
first. It would actually have been pretty hard to get misbehavior in these cases, but for
correctness sake it is good to make this usage consistent.
<rdar://problem/24978569>
llvm-svn: 263326
Summary:
This fixes a couple of corner cases in FileSpec, related to AppendPathComponent and
handling of root directory (/) file spec. I add a bunch of unit tests for the new behavior.
Summary of changes:
FileSpec("/bar").GetCString(): before "//bar", after "/bar".
FileSpec("/").CopyByAppendingPathComponent("bar").GetCString(): before "//bar", after "/bar".
FileSpec("C:", ePathSyntaxWindows).CopyByAppendingPathComponent("bar").GetCString(): before "C:/bar", after "C:\bar".
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18044
llvm-svn: 263207
The swig typemaps had some magic for output File *'s on OS X that made:
SBDebugger.GetOutputFileHandle()
actually work. That was protected by a "#ifdef __MACOSX__", but the corresponding define
got lost going from the Darwin shell scripts to the python scripts for running
swig, so the code was elided. I need to pass the define to SWIG, but only when
targetting Darwin.
So I added a target-platform argument to prepare_bindings, and if that
is Darwin, I pass -D__APPLE__ to swig, and that activates this code again, and
GetOutputFileHandle works again. Note, I only pass that argument for the Xcode
build. I'm sure it is possible to do that for cmake, but my cmake-foo is weak.
I should have been able to write a test for this by creating a debugger, setting the
output file handle to something file, writing to it, getting the output file handle
and reading it. But SetOutputFileHandle doesn't seem to work from Python, so I'd
have to write a pexpect test to test this, which I'd rather not do.
llvm-svn: 263183
When the parent of an expression is anonymous, skip adding '.' or '->' before the expression name.
Differential Revision: http://reviews.llvm.org/D18005
llvm-svn: 263166
Removed lldb_private::File::Duplicate() and the copy constructor and the assignment operator that used to duplicate the file handles and made them private so no one uses them. Previously the lldb_private::File::Duplicate() function duplicated files that used file descriptors, (int) but not file streams (FILE *), so the lldb_private::File::Duplicate() function only worked some of the time. No one else excep thee ScriptInterpreterPython was using these functions, so that aren't needed nor desired. Previously every time you would drop into the python interpreter we would duplicate files, and now we avoid this file churn.
<rdar://problem/24877720>
llvm-svn: 263161
Fix a problem raised with the previous patches being applied in the wrong order.
Committed on behalf of: Dean De Leo <dean@codeplay.com>
llvm-svn: 263134
This commit implements the reading of stack spilled function arguments for little endian MIPS targets.
Committed on behalf of: Dean De Leo <dean@codeplay.com>
llvm-svn: 263131
This commit implements the reading of stack spilled function arguments for little endian MIPS targets.
Committed on behalf of: Dean De Leo <dean@codeplay.com>
llvm-svn: 263130
Currently it is not specified, and since allocations are usually
requested once we hit a renderscript breakpoint, the language will be
inferred being as renderscript by the ExpressionParser.
Actually allocations attempt to invoke functions part of the RS runtime,
written in C/C++, so evaluating the calls in RenderScript could be
misleading.
In particular, in MIPS, the ABI between C/C++ (mips o32) and
renderscript (arm) might introduce subtle bugs when evaluating such
expressions.
This change explicitly sets the language used to evaluate the allocations
as C++.
Committed on behalf of: Dean De Leo <dean@codeplay.com>
llvm-svn: 263129
Nobody seems to know what purpose these files serve, yet they were accumulating by the thousands in the test traces directory. I'm proposing we delete them.
Creating these files accounted for about 2.5% of the time to run ninja check-lldb on my machine, which isn't a lot, but it's something.
llvm-svn: 263122
The current expression language is currently tracked in a few places within the ClangExpressionParser constructor.
This patch adds a private lldb::LanguageType attribute to the ClangExpressionParser class and tracks the expression language from that one place.
Author: Luke Drummond <luke.drummond@codeplay.com>
Differential Revision: http://reviews.llvm.org/D17719
llvm-svn: 263099
Stephane Sezer