`fatal` should only be used for malformed inputs according to
ErrorHandler.h; `error` is more appropriate for missing arguments,
accompanied by a check to bail out early in case of the error. Some
tests need to be adjusted accordingly.
Makes `lld/test/MachO/arch.s` pass with `LLD_IN_TEST=2`.
Reviewed By: #lld-macho, int3
Differential Revision: https://reviews.llvm.org/D112879
We need to reset global state between runs, similar to the other ports.
There's some file-static state which needs to be reset as well and we
need to add some new helpers for that.
With this change, most LLD Mach-O tests pass with `LLD_IN_TEST=2` (which
runs the linker twice on each test). Some tests will be fixed by the
remainder of this stack, and the rest are fundamentally incompatible
with that mode (e.g. they intentionally throw fatal errors).
Fixes PR52070.
Reviewed By: #lld-macho, int3
Differential Revision: https://reviews.llvm.org/D112878
In particular, they should not cause archives to be eagerly loaded. This
matches ld64's behavior.
Fixes PR52246.
Reviewed By: #lld-macho, thakis
Differential Revision: https://reviews.llvm.org/D112756
There are a couple internal builds that require the use of this flag.
Reviewed By: #lld-macho, int3
Differential Revision: https://reviews.llvm.org/D112594
Compact unwind entries (CUEs) contain pointers to their respective
function symbols. However, during the link process, it's far more useful
to have pointers from the function symbol to the CUE than vice versa.
This diff adds that pointer in the form of `Defined::compactUnwind`.
In particular, when doing dead-stripping, we want to mark CUEs live when
their function symbol is live; and when doing ICF, we want to dedup
sections iff the symbols in that section have identical CUEs. In both
cases, we want to be able to locate the symbols within a given section,
as well as locate the CUEs belonging to those symbols. So this diff also
adds `InputSection::symbols`.
The ultimate goal of this refactor is to have ICF support dedup'ing
functions with unwind info, but that will be handled in subsequent
diffs. This diff focuses on simplifying `-dead_strip` --
`findFunctionsWithUnwindInfo` is no longer necessary, and
`Defined::isLive()` is now a lot simpler. Moreover, UnwindInfoSection no
longer has to check for dead CUEs -- we simply avoid adding them in the
first place.
Additionally, we now support stripping of dead LSDAs, which follows
quite naturally since `markLive()` can now reach them via the CUEs.
Reviewed By: #lld-macho, gkm
Differential Revision: https://reviews.llvm.org/D109944
In Driver.cpp, addFramework used std::string instance to represent the path of a framework, which will be freed after the function returns. However, this string is stored in loadedArchive, which will be used later to compare with path of newly added frameworks. This caused https://bugs.llvm.org/show_bug.cgi?id=52133. A test is included in this commit to reproduce this bug.
Now resolveDylibPath returns a StringRef instance, and it uses StringSaver to save its data, then returns it to functions on the top. This ensures the resolved framework path is still valid after LC_LINKER_OPTION is parsed.
Reviewed By: int3, #lld-macho, oontvoo
Differential Revision: https://reviews.llvm.org/D111706
Instead, just make the later flag win, like usual.
Implement this by making -no_deduplicate an actual alias for --icf=none
at the Options.td level.
Differential Revision: https://reviews.llvm.org/D110672
This is what ld64 does. Deviating in behavior here can result
in some subtle duplicate symbol errors, as detailed in the objc.s test.
Differential Revision: https://reviews.llvm.org/D108781
The previous logic was duplicated between symbol-initiated
archive loads versus flag-initiated loads (i.e. `-force_load` and
`-ObjC`). This resulted in code duplication as well as redundant work --
we would create Archive instances twice whenever we had one of those
flags; once in `getArchiveMembers` and again when we constructed the
ArchiveFile.
This was motivated by an upcoming diff where we load archive members
containing ObjC-related symbols before loading those containing
ObjC-related sections, as well as before performing symbol resolution.
Without this refactor, it would be difficult to do that while avoiding
loading the same archive member twice.
Differential Revision: https://reviews.llvm.org/D108780
This matches ld64's behavior, and makes it easier to fit LLD
into existing build systems.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D107011
Ported from COFF/ELF; test is adapted from
test/COFF/thinlto-archivecollision.ll
LTO expects every bitcode file to have a unique name. If given multiple bitcode
files with the same name, it errors with "Expected at most one ThinLTO module
per bitcode file".
This change incorporates the archive name, to disambiguate members with the
same name in different archives and the offset in archive to disambiguate
members with the same name in the same archive.
Differential Revision: https://reviews.llvm.org/D106179
In ld64, `-U section$start$FOO$bar` handles `section$start$FOO$bar`
as a regular `section$start` symbol, that is section$start processing
happens before -U processing.
Likely, nobody uses that in practice so it doesn't seem very important
to be compatible with this, but it also moves the -U handling code next
to the `-undefined dynamic_lookup` handling code, which is nice because
they do the same thing. And, in fact, this did identify a bug in a corner
case in the intersection of `-undefined dynamic_lookup` and dead-stripping
(fix for that in D106565).
Vaguely related to PR50760.
No interesting behavior change.
Differential Revision: https://reviews.llvm.org/D106566
treatUndefinedSymbol() was previously called before gatherInputSections()
and markLive() for these special symbols, but after them for normal
undefineds.
For PR50760, treatUndefinedSymbol() will have to potentially create
sections, so it's good to move treatUndefinedSymbol() for special
undefineds later, so that it can assume that gatherInputSections()
and markLive() has already been called always.
No intended behavior change, but part of PR50760 (and covered in
tests in the patch for the full feature).
Differential Revision: https://reviews.llvm.org/D106552
ICF previously operated only within a given OutputSection. We would
merge all CFStrings first, then merge all regular code sections in a
second phase. This worked fine since CFStrings would never reference
regular `__text` sections. However, I would like to expand ICF to merge
functions that reference unwind info. Unwind info references the LSDA
section, which can in turn reference the `__text` section, so we cannot
perform ICF in phases.
In order to have ICF operate on InputSections spanning multiple
OutputSections, we need a way to distinguish InputSections that are
destined for different OutputSections, so that we don't fold across
section boundaries. We achieve this by creating OutputSections early,
and setting `InputSection::parent` to point to them. This is what
LLD-ELF does. (This change should also make it easier to implement the
`section$start$` symbols.)
This diff also folds InputSections w/o checking their flags, which I
think is the right behavior -- if they are destined for the same
OutputSection, they will have the same flags in the output (even if
their input flags differ). I.e. the `parent` pointer check subsumes the
`flags` check. In practice this has nearly no effect (ICF did not become
any more effective on chromium_framework).
I've also updated ICF.cpp's block comment to better reflect its current
status.
Reviewed By: #lld-macho, smeenai
Differential Revision: https://reviews.llvm.org/D105641
In D105866, we used an intermediate container to store a list of opcodes. Here,
we use that data structure to help us perform optimization passes that would allow
a more efficient encoding of bind opcodes. Currently, the functionality mirrors the
optimization pass {1,2} done in ld64 for bind opcodes under optimization gate
to prevent slight regressions.
Reviewed By: int3, #lld-macho
Differential Revision: https://reviews.llvm.org/D105867
This adds support for the lld-only `--thinlto-cache-policy` option, as well as
implementations for ld64's `-cache_path_lto`, `-prune_interval_lto`,
`-prune_after_lto`, and `-max_relative_cache_size_lto`.
Test is adapted from lld/test/ELF/lto/cache.ll
Differential Revision: https://reviews.llvm.org/D105922
The mappings we were using had a small number of keys, so a vector is
probably better. This allows us to remove the last usage of std::map in
our codebase.
I also used `removeSimulator` to simplify the code a bit further.
Reviewed By: #lld-macho, thakis
Differential Revision: https://reviews.llvm.org/D105786
lld currently only references dyld_stub_binder when it's needed.
ld64 always references it when libSystem is linked.
Match ld64.
The (somewhat lame) motivation is that `nm` on a binary without any
export writes a "no symbols" warning to stderr, and this change makes
it so that every binary in practice has at least a reference to
dyld_stub_binder, which suppresses that.
Every "real" output file will reference dyld_stub_binder, so most
of the time this shouldn't make much of a difference. And if you
really don't want to have this reference for whatever reason, you
can stop passing -lSystem, like you have to for ld64 anyways.
(After linking any dylib, we dump the exported list of symbols to
a txt file with `nm` and only relink downstream deps if that txt
file changes. A nicer fix is to make lld optionally write .tbd files
with the public interface of a linked dylib and use that instead,
but for now the txt files are what we do.)
Differential Revision: https://reviews.llvm.org/D105782
Change "dyn_cast" to "isa" to get rid of the unused
variable "bitcodeFile".
gcc warned with
lld/MachO/Driver.cpp:531:17: warning: unused variable 'bitcodeFile' [-Wunused-variable]
531 | if (auto *bitcodeFile = dyn_cast<BitcodeFile>(file)) {
| ^~~~~~~~~~~
This implements the part of -export_dynamic that adds external
symbols as dead strip roots even for executables.
It does not yet implement the effect -export_dynamic has for LTO.
I tried just replacing `config->outputType != MH_EXECUTE` with
`(config->outputType != MH_EXECUTE || config->exportDynamic)` in
LTO.cpp, but then local symbols make it into the symbol table too,
which is too much (and also doesn't match ld64). So punt on this
for now until I understand it better.
(D91583 may or may not be related too).
Differential Revision: https://reviews.llvm.org/D105482
This is the other flag clang passes when calling clang with two -arch
flags (which means with this, `clang -arch x86_64 -arch arm64 -fuse-ld=lld ...`
now no longer prints any warnings \o/). Since clang calls the linker several
times in that setup, it's not clear to the user from which invocation the
errors are. The flag's help text is
Specifies that the linker should augment error and warning messages
with the architecture name.
In ld64, the only effect of the flag is that undefined symbols are prefaced
with
Undefined symbols for architecture x86_64:
instead of the usual "Undefined symbols:". So for now, let's add this
only to undefined symbol errors too. That's probably the most common
linker diagnostic.
Another idea would be to prefix errors and warnings with "ld64.lld(x86_64):"
instead of the usual "ld64.lld:", but I'm not sure if people would
misunderstand that as a comment about the arch of ld itself.
But open to suggestions on what effect this flag should have :) And we
don't have to get it perfect now, we can iterate on it.
Differential Revision: https://reviews.llvm.org/D105450
This is one of two flags clang passes to the linker when giving calling
clang with multiple -arch flags.
I think it'd make sense to also use finalOutput instead of outputFile
in CodeSignatureSection() and when replacing @executable_path, but
ld64 doesn't do that, so I'll at least put those in separate commits.
Differential Revision: https://reviews.llvm.org/D105449
I think this is an old way for doing what is done with
-reexport_library these days, but it's e.g. still used in libunwind's
build (the opensource.apple.com one, not the llvm one).
Differential Revision: https://reviews.llvm.org/D105448
We have been creating many ConcatInputSections with identical values due
to .subsections_via_symbols. This diff factors out the identical values
into a Shared struct, to reduce memory consumption and make copying
cheaper.
I also changed `callSiteCount` from a uint32_t to a 31-bit field to save an
extra word.
All in all, this takes InputSection from 120 to 72 bytes (and
ConcatInputSection from 160 to 112 bytes), i.e. 30% size reduction in
ConcatInputSection.
Numbers for linking chromium_framework on my 3.2 GHz 16-Core Intel Xeon W:
N Min Max Median Avg Stddev
x 20 4.14 4.24 4.18 4.183 0.027548999
+ 20 4.04 4.11 4.075 4.0775 0.018027756
Difference at 95.0% confidence
-0.1055 +/- 0.0149005
-2.52211% +/- 0.356215%
(Student's t, pooled s = 0.0232803)
Reviewed By: #lld-macho, thakis
Differential Revision: https://reviews.llvm.org/D105305
This is a pretty big refactoring diff, so here are the motivations:
Previously, ICF ran after scanRelocations(), where we emitting
bind/rebase opcodes etc. So we had a bunch of redundant leftovers after
ICF. Having ICF run before Writer seems like a better design, and is
what LLD-ELF does, so this diff refactors it accordingly.
However, ICF had two dependencies on things occurring in Writer: 1) it
needs literals to be deduplicated beforehand and 2) it needs to know
which functions have unwind info, which was being handled by
`UnwindInfoSection::prepareRelocations()`.
In order to do literal deduplication earlier, we need to add literal
input sections to their corresponding output sections. So instead of
putting all input sections into the big `inputSections` vector, and then
filtering them by type later on, I've changed things so that literal
sections get added directly to their output sections during the 'gather'
phase. Likewise for compact unwind sections -- they get added directly
to the UnwindInfoSection now. This latter change is not strictly
necessary, but makes it easier for ICF to determine which functions have
unwind info.
Adding literal sections directly to their output sections means that we
can no longer determine `inputOrder` from iterating over
`inputSections`. Instead, we store that order explicitly on
InputSection. Bloating the size of InputSection for this purpose would
be unfortunate -- but LLD-ELF has already solved this problem: it reuses
`outSecOff` to store this order value.
One downside of this refactor is that we now make an additional pass
over the unwind info relocations to figure out which functions have
unwind info, since want to know that before `processRelocations()`. I've
made sure to run that extra loop only if ICF is enabled, so there should
be no overhead in non-optimizing runs of the linker.
The upside of all this is that the `inputSections` vector now contains
only ConcatInputSections that are destined for ConcatOutputSections, so
we can clean up a bunch of code that just existed to filter out other
elements from that vector.
I will test for the lack of redundant binds/rebases in the upcoming
cfstring deduplication diff. While binds/rebases can also happen in the
regular `.text` section, they're more common in `.data` sections, so it
seems more natural to test it that way.
This change is perf-neutral when linking chromium_framework.
Reviewed By: oontvoo
Differential Revision: https://reviews.llvm.org/D105044
Everything (including test) modified from ELF/COFF. Using the same syntax
(--lto-O3, etc) as ELF.
Differential Revision: https://reviews.llvm.org/D105223
Literal sections can be deduplicated before running ICF. That makes it
easy to compare them during ICF: we can tell if two literals are
constant-equal by comparing their offsets in their OutputSection.
LLD-ELF takes a similar approach.
Reviewed By: #lld-macho, gkm
Differential Revision: https://reviews.llvm.org/D104671
The variable used to need the wider scope, but doesn't after the
reland. See LC_LINKER_OPTIONS-related discussion on
https://reviews.llvm.org/D104353 for background.
We make it less than INT_MAX in order not to conflict with the ordering
of zerofill sections, which must always be placed at the end of their
segment.
This is the more structural fix for the issue addressed in {D104596}.
Reviewed By: #lld-macho, thakis
Differential Revision: https://reviews.llvm.org/D104607
findLibrary() returned a StringRef while findFramework & other helper
functions returned std::strings. Standardize on std::string.
(I initially tried making the helper functions all return StringRefs,
but I realized we shouldn't return input StringRefs since their
lifetimes would not be obvious from the calling code.)
The `icf` command-line option is not present in ld64, so it should use the LLD option syntax, which begins with double dashes and separates primary option from any suboption with the equal sign.
Differential Revision: https://reviews.llvm.org/D104548
ICF = Identical C(ode|OMDAT) Folding
This is the LLD ELF/COFF algorithm, adapted for MachO. So far, only `-icf all` is supported. In order to support `-icf safe`, we will need to port address-significance tables (`.addrsig` directives) to MachO, which will come in later diffs.
`check-{llvm,clang,lld}` have 0 regressions for `lld -icf all` vs. baseline ld64.
We only run ICF on `__TEXT,__text` for reasons explained in the block comment in `ConcatOutputSection.cpp`.
Here is the perf impact for linking `chromium_framekwork` on a Mac Pro (16-core Xeon W) for the non-ICF case vs. pre-ICF:
```
N Min Max Median Avg Stddev
x 20 4.27 4.44 4.34 4.349 0.043029977
+ 20 4.37 4.46 4.405 4.4115 0.025188761
Difference at 95.0% confidence
0.0625 +/- 0.0225658
1.43711% +/- 0.518873%
(Student's t, pooled s = 0.0352566)
```
Reviewed By: #lld-macho, int3
Differential Revision: https://reviews.llvm.org/D103292
We need to dedup archive loads (similar to what we do for dylib
loads).
I noticed this issue after building some Swift stuff that used
`-force_load_swift_libs`, as it caused some Swift archives to be loaded
many times.
Reviewed By: #lld-macho, thakis, MaskRay
Differential Revision: https://reviews.llvm.org/D104353
This is motivated by an upcoming diff in which the
WordLiteralInputSection ctor sets itself up based on the value of its
section flags. As such, it needs to be passed the `flags` value as part
of its ctor parameters, instead of having them assigned after the fact
in `parseSection()`. While refactoring code to make that possible, I
figured it would make sense for the other InputSections to also take
their initial values as ctor parameters.
Reviewed By: #lld-macho, thakis
Differential Revision: https://reviews.llvm.org/D103978
These fields currently live in the parent InputSection class,
but they should be specific to ConcatInputSection, since the other
InputSection classes (that contain literals) aren't atomically live or
dead -- rather their component string/int literals should have
individual liveness states. (An upcoming diff will add liveness bits for
StringPieces and fixed-sized literals.)
I also factored out some asserts for isCoalescedWeak() in MarkLive.cpp.
We now avoid putting coalesced sections in the `inputSections` vector,
so we don't have to check/assert against it everywhere.
Reviewed By: #lld-macho, thakis
Differential Revision: https://reviews.llvm.org/D103977
For debugging dylib loading, it's useful to have some insight into what
the linker is doing.
ld64 has the undocumented RC_TRACE_DYLIB_SEARCHING env var
for this printing dylib search candidates.
This adds a flag --print-dylib-search to make lld print the seame information.
It's useful for users, but also for writing tests. The output is formatted
slightly differently than ld64, but we still support RC_TRACE_DYLIB_SEARCHING
to offer at least a compatible way to trigger this.
ld64 has both `-print_statistics` and `-trace_symbol_output` to enable
diagnostics output. I went with "print" since that seems like a more
straightforward name.
Differential Revision: https://reviews.llvm.org/D103985
It causes libraries whose names start with "swift" to be force-loaded.
Note that unlike the more general `-force_load`, this flag only applies
to libraries specified via LC_LINKER_OPTIONS, and not those passed on
the command-line. This is what ld64 does.
Reviewed By: #lld-macho, thakis
Differential Revision: https://reviews.llvm.org/D103709
Shoaib Meenai