As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
llvm-svn: 358546
The bug report:
https://bugs.llvm.org/show_bug.cgi?id=36036
...requests a DAG change for this, but an IR canonicalization
probably handles most cases. If we still want to match this
pattern in the backend, there's a proposal for that too:
D47831
Alive proofs including nsw/nuw cases that were first noted in:
D46988
https://rise4fun.com/Alive/Kmp
This patch is largely copied from the existing code that was
initially added with:
D40984
...but I didn't see much gain from trying to share code.
llvm-svn: 334137
When adjusting a cmp in order to canonicalize an abs/nabs select pattern we need
to use the type of the existing operand when creating a new operand not the
type of a select operand, as the two may be different.
This fixes PR37686.
llvm-svn: 334019
Libfuzzer tests have been fixed to prevent being optimized.
Original commit message:
If the nsw flag is used in the absolute value then it is undefined for INT_MIN. For all other value it will produce a positive number. So we can assume the result is positive.
This breaks some InstCombine abs/nabs combining tests because we simplify the second compare from known bits rather than as the whole pattern. Looks like we can probably fix it by adding a neg+abs/nabs combine to just swap the select operands. N
Differential Revision: https://reviews.llvm.org/D47041
llvm-svn: 333300
If the nsw flag is used in the absolute value then it is undefined for INT_MIN. For all other value it will produce a positive number. So we can assume the result is positive.
This breaks some InstCombine abs/nabs combining tests because we simplify the second compare from known bits rather than as the whole pattern. Looks like we can probably fix it by adding a neg+abs/nabs combine to just swap the select operands. Need to check alive to make sure there are no corner cases.
Differential Revision: https://reviews.llvm.org/D47041
llvm-svn: 333226
Also, produce the canonical IR abs (s<0) to be more efficient.
This is the libcall equivalent of the clang builtin change from:
rL333038
Pasting from that commit message:
The stdlib functions are defined in section 7.20.6.1 of the C standard with:
"If the result cannot be represented, the behavior is undefined."
That lets us mark the negation with 'nsw' because "sub i32 0, INT_MIN" would
be UB/poison.
llvm-svn: 333042
We already do this for min/max (see the blob above the diff),
so we should do the same for abs/nabs.
A sign-bit check (<s 0) is used as a predicate for other IR
transforms and it's likely the best for codegen.
This might solve the motivating cases for D47037 and D47041,
but I think those patches still make sense. We can't guarantee
this canonicalization if the icmp has more than one use.
Differential Revision: https://reviews.llvm.org/D47076
llvm-svn: 332819
According to alive this is valid. I'm hoping to use this to make an assumption that the sign bit is zero after this sequence. The only way it wouldn't be is if the input was INT__MIN, but by preserving the flags we can make doing this to INT_MIN UB.
The nuw flags is weird because it creates such a contradiction that the original number would have to be positive meaning we could remove the select entirely, but we don't get that far.
Differential Revision: https://reviews.llvm.org/D46988
llvm-svn: 332623
We want to do this for 2 reasons:
1. Value tracking does not recognize the ashr variant, so it would fail to match for cases like D39766.
2. DAGCombiner does better at producing optimal codegen when we have the cmp+sel pattern.
More detail about what happens in the backend:
1. DAGCombiner has a generic transform for all targets to convert the scalar cmp+sel variant of abs
into the shift variant. That is the opposite of this IR canonicalization.
2. DAGCombiner has a generic transform for all targets to convert the vector cmp+sel variant of abs
into either an ABS node or the shift variant. That is again the opposite of this IR canonicalization.
3. DAGCombiner has a generic transform for all targets to convert the exact shift variants produced by #1 or #2
into an ISD::ABS node. Note: It would be an efficiency improvement if we had #1 go directly to an ABS node
when that's legal/custom.
4. The pattern matching above is incomplete, so it is possible to escape the intended/optimal codegen in a
variety of ways.
a. For #2, the vector path is missing the case for setlt with a '1' constant.
b. For #3, we are missing a match for commuted versions of the shift variants.
5. Therefore, this IR canonicalization can only help get us to the optimal codegen. The version of cmp+sel
produced by this patch will be recognized in the DAG and converted to an ABS node when possible or the
shift sequence when not.
6. In the following examples with this patch applied, we may get conditional moves rather than the shift
produced by the generic DAGCombiner transforms. The conditional move is created using a target-specific
decision for any given target. Whether it is optimal or not for a particular subtarget may be up for debate.
define i32 @abs_shifty(i32 %x) {
%signbit = ashr i32 %x, 31
%add = add i32 %signbit, %x
%abs = xor i32 %signbit, %add
ret i32 %abs
}
define i32 @abs_cmpsubsel(i32 %x) {
%cmp = icmp slt i32 %x, zeroinitializer
%sub = sub i32 zeroinitializer, %x
%abs = select i1 %cmp, i32 %sub, i32 %x
ret i32 %abs
}
define <4 x i32> @abs_shifty_vec(<4 x i32> %x) {
%signbit = ashr <4 x i32> %x, <i32 31, i32 31, i32 31, i32 31>
%add = add <4 x i32> %signbit, %x
%abs = xor <4 x i32> %signbit, %add
ret <4 x i32> %abs
}
define <4 x i32> @abs_cmpsubsel_vec(<4 x i32> %x) {
%cmp = icmp slt <4 x i32> %x, zeroinitializer
%sub = sub <4 x i32> zeroinitializer, %x
%abs = select <4 x i1> %cmp, <4 x i32> %sub, <4 x i32> %x
ret <4 x i32> %abs
}
> $ ./opt -instcombine shiftyabs.ll -S | ./llc -o - -mtriple=x86_64 -mattr=avx
> abs_shifty:
> movl %edi, %eax
> negl %eax
> cmovll %edi, %eax
> retq
>
> abs_cmpsubsel:
> movl %edi, %eax
> negl %eax
> cmovll %edi, %eax
> retq
>
> abs_shifty_vec:
> vpabsd %xmm0, %xmm0
> retq
>
> abs_cmpsubsel_vec:
> vpabsd %xmm0, %xmm0
> retq
>
> $ ./opt -instcombine shiftyabs.ll -S | ./llc -o - -mtriple=aarch64
> abs_shifty:
> cmp w0, #0 // =0
> cneg w0, w0, mi
> ret
>
> abs_cmpsubsel:
> cmp w0, #0 // =0
> cneg w0, w0, mi
> ret
>
> abs_shifty_vec:
> abs v0.4s, v0.4s
> ret
>
> abs_cmpsubsel_vec:
> abs v0.4s, v0.4s
> ret
>
> $ ./opt -instcombine shiftyabs.ll -S | ./llc -o - -mtriple=powerpc64le
> abs_shifty:
> srawi 4, 3, 31
> add 3, 3, 4
> xor 3, 3, 4
> blr
>
> abs_cmpsubsel:
> srawi 4, 3, 31
> add 3, 3, 4
> xor 3, 3, 4
> blr
>
> abs_shifty_vec:
> vspltisw 3, -16
> vspltisw 4, 15
> vsubuwm 3, 4, 3
> vsraw 3, 2, 3
> vadduwm 2, 2, 3
> xxlxor 34, 34, 35
> blr
>
> abs_cmpsubsel_vec:
> vspltisw 3, -16
> vspltisw 4, 15
> vsubuwm 3, 4, 3
> vsraw 3, 2, 3
> vadduwm 2, 2, 3
> xxlxor 34, 34, 35
> blr
>
Differential Revision: https://reviews.llvm.org/D40984
llvm-svn: 320921
This update was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
llvm-svn: 186268