Change `Module::ASTFile` and `ModuleFile::File` to use
`Optional<FileEntryRef>` instead of `const FileEntry *`. One of many
steps toward removing `FileEntry::getName`.
Differential Revision: https://reviews.llvm.org/D89836
cache for implicit modules.
The ModuleManager's use of FileEntry nodes as the keys for its map of
loaded modules is less than ideal. Uniqueness for FileEntry nodes is
maintained by FileManager, which in turn uses inode numbers on hosts
that support that. When coupled with the module cache's proclivity for
turning over and deleting stale PCMs, this means entries for different
module files can wind up reusing the same underlying inode. When this
happens, subsequent accesses to the Modules map will disagree on the
ModuleFile associated with a given file.
In general, it is not sufficient to resolve this conundrum with a type
like FileEntryRef that stores the name of the FileEntry node on first
access because of path canonicalization issues. However, the paths
constructed for implicit module builds are fully under Clang's
control. We *can*, therefore, rely on their structure being consistent
across operating systems and across subsequent accesses to the Modules
map.
To mitigate the effects of inode reuse, perform an extra name check when
implicit modules are returned from the cache. This has the effect of
forcing reused FileEntry nodes to stomp over existing-but-stale entries
in the cache, which simulates a miss - exactly the desired behavior.
rdar://48443680
Patch by Robert Widmann!
Differential Revision: https://reviews.llvm.org/D86823
This change got missed while upstreaming
https://reviews.llvm.org/D77772. This is the part of that change that
actually passes the correct arguments when opening a PCM.
The test didn't catch this because it starts at the
`MemoryBuffer::getOpenFile` level. It's not really possible to test
`ModuleManager::addModule` itself to verify how the file was opened.
As per comment on https://reviews.llvm.org/D72860, it is suggested to
revert this change in the meantime, since it has introduced regression.
This reverts commit 83f4c3af02.
Partially reverts 0a2be46cfd as it turned
out to cause redundant module rebuilds in multi-process incremental builds.
When a module was getting out of date, all compilation processes started at the
same time were marking it as `ToBuild`. So each process was building the same
module instead of checking if it was built by someone else and using that
result. In addition to the work duplication, contention on the same .pcm file
wasn't making builds faster.
Note that for a single-process build this change would cause redundant module
reads and validations. But reading a module is faster than building it and
multi-process builds are more common than single-process. So I'm willing to
make such a trade-off.
rdar://problem/54395127
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D72860
Remove some cognitive load by renaming clang/Serialization/Module.h to
clang/Serialization/ModuleFile.h, since it declares the ModuleFile
class. This also makes editing a bit easier, since the basename of the
file no long conflicts with clang/Basic/Module.h, which declares the
Module class. Also move lib/Serialization/Module.cpp to
lib/Serialization/ModuleFile.cpp.
The other paremeters appear to be sufficient to determine which modules
have just been loaded and need to be removed, so stop collecting and
sending in that set explicitly.
Marking a module for a rebuild when its signature differs from the
expected one causes redundant module rebuilds for incremental builds.
When a module is updated, its signature changes. But its consumers still
have the old signature and loading them will result in signature
mismatches. It will correctly cause the rebuilds for the consumers but
we don't need to rebuild the common module for each of them as it is
already up to date.
In practice this bug causes longer build times. We are doing more work
than required and only a single process can build a module, so parallel
builds degrade to a single-process mode where extra processes are just
waiting on a file lock.
Fix by not marking a module dependency for a rebuild on signature
mismatch. We'll check if it is up to date when we load it.
rdar://problem/50212358
Reviewers: dexonsmith, bruno, rsmith
Reviewed By: dexonsmith, bruno
Subscribers: jkorous, ributzka, cfe-commits, aprantl
Differential Revision: https://reviews.llvm.org/D66907
llvm-svn: 370274
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
Differential revision: https://reviews.llvm.org/D66259
llvm-svn: 368942
Update the callers of FileManager::getFile and FileManager::getDirectory to handle the new llvm::ErrorOr-returning methods.
Signed-off-by: Harlan Haskins <harlan@apple.com>
llvm-svn: 367616
Leverage the InMemoryModuleCache to invalidate a module the first time
it fails to import (and to lock a module as soon as it's built or
imported successfully). For implicit module builds, this optimizes
importing deep graphs where the leaf module is out-of-date; see example
near the end of the commit message.
Previously the cache finalized ("locked in") all modules imported so far
when starting a new module build. This was sufficient to prevent
loading two versions of the same module, but was somewhat arbitrary and
hard to reason about.
Now the cache explicitly tracks module state, where each module must be
one of:
- Unknown: module not in the cache (yet).
- Tentative: module in the cache, but not yet fully imported.
- ToBuild: module found on disk could not be imported; need to build.
- Final: module in the cache has been successfully built or imported.
Preventing repeated failed imports avoids variation in builds based on
shifting filesystem state. Now it's guaranteed that a module is loaded
from disk exactly once. It now seems safe to remove
FileManager::invalidateCache, but I'm leaving that for a later commit.
The new, precise logic uncovered a pre-existing problem in the cache:
the map key is the module filename, and different contexts use different
filenames for the same PCM file. (In particular, the test
Modules/relative-import-path.c does not build without this commit.
r223577 started using a relative path to describe a module's base
directory when importing it within another module. As a result, the
module cache sees an absolute path when (a) building the module or
importing it at the top-level, and a relative path when (b) importing
the module underneath another one.)
The "obvious" fix is to resolve paths using FileManager::getVirtualFile
and change the map key for the cache to a FileEntry, but some contexts
(particularly related to ASTUnit) have a shorter lifetime for their
FileManager than the InMemoryModuleCache. This is worth pursuing
further in a later commit; perhaps by tying together the FileManager and
InMemoryModuleCache lifetime, or moving the in-memory PCM storage into a
VFS layer.
For now, use the PCM's base directory as-written for constructing the
filename to check the ModuleCache.
Example
=======
To understand the build optimization, first consider the build of a
module graph TU -> A -> B -> C -> D with an empty cache:
TU builds A'
A' builds B'
B' builds C'
C' builds D'
imports D'
B' imports C'
imports D'
A' imports B'
imports C'
imports D'
TU imports A'
imports B'
imports C'
imports D'
If we build TU again, where A, B, C, and D are in the cache and D is
out-of-date, we would previously get this build:
TU imports A
imports B
imports C
imports D (out-of-date)
TU builds A'
A' imports B
imports C
imports D (out-of-date)
builds B'
B' imports C
imports D (out-of-date)
builds C'
C' imports D (out-of-date)
builds D'
imports D'
B' imports C'
imports D'
A' imports B'
imports C'
imports D'
TU imports A'
imports B'
imports C'
imports D'
After this commit, we'll immediateley invalidate A, B, C, and D when we
first observe that D is out-of-date, giving this build:
TU imports A
imports B
imports C
imports D (out-of-date)
TU builds A' // The same graph as an empty cache.
A' builds B'
B' builds C'
C' builds D'
imports D'
B' imports C'
imports D'
A' imports B'
imports C'
imports D'
TU imports A'
imports B'
imports C'
imports D'
The new build matches what we'd naively expect, pretty closely matching
the original build with the empty cache.
rdar://problem/48545366
llvm-svn: 355778
Change MemoryBufferCache to InMemoryModuleCache, moving it from Basic to
Serialization. Another patch will start using it to manage module build
more explicitly, but this is split out because it's mostly mechanical.
Because of the move to Serialization we can no longer abuse the
Preprocessor to forward it to the ASTReader. Besides the rename and
file move, that means Preprocessor::Preprocessor has one fewer parameter
and ASTReader::ASTReader has one more.
llvm-svn: 355777
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This patch moves the virtual file system form clang to llvm so it can be
used by more projects.
Concretely the patch:
- Moves VirtualFileSystem.{h|cpp} from clang/Basic to llvm/Support.
- Moves the corresponding unit test from clang to llvm.
- Moves the vfs namespace from clang::vfs to llvm::vfs.
- Formats the lines affected by this change, mostly this is the result of
the added llvm namespace.
RFC on the mailing list:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/126657.html
Differential revision: https://reviews.llvm.org/D52783
llvm-svn: 344140
While investigating why LLDB (which can build hundreds of clang
modules during one debug session) was getting "too many open files"
errors, I found that most of them are .pcm files that are kept open by
ModuleManager. Pretty much all of the open file dscriptors are
FileEntries that are refering to `.pcm` files for which a buffer
already exists in a CompilerInstance's PCMCache.
Before PCMCache was added it was necessary to hold on to open file
descriptors to ensure that all ModuleManagers using the same
FileManager read the a consistent version of a given `.pcm` file on
disk, even when a concurrent clang process overwrites the file halfway
through. The PCMCache makes this practice unnecessary, since it caches
the entire contents of a `.pcm` file, while the FileManager caches all
the stat() information.
This patch adds a call to FileEntry::closeFile() to the path where a
Buffer has already been created. This is necessary because even for a
freshly written `.pcm` file the file is stat()ed once immediately
after writing to generate a FileEntry in the FileManager. Because a
freshly-generated file's contents is stored in the PCMCache, it is
fine to close the file immediately thereafter. The second change this
patch makes is to set the `ShouldClose` flag to true when reading a
`.pcm` file into the PCMCache for the first time.
[For reference, in 1 Clang instance there is
- 1 FileManager and
- n ModuleManagers with
- n PCMCaches.]
rdar://problem/40906753
Differential Revision: https://reviews.llvm.org/D50870
llvm-svn: 340188
Extend the -fmodule-file option to support the [<name>=]<file> value format.
If the name is omitted, then the old semantics is preserved (the module file
is loaded whether needed or not). If the name is specified, then the mapping
is treated as just another prebuilt module search mechanism, similar to
-fprebuilt-module-path, and the module file is only loaded if actually used
(e.g., via import). With one exception: this mapping also overrides module
file references embedded in other modules (which can be useful if module files
are moved/renamed as often happens during remote compilation).
This override semantics requires some extra work: we now store the module name
in addition to the file name in the serialized AST representation.
Reviewed By: rsmith
Differential Revision: https://reviews.llvm.org/D35020
llvm-svn: 312220
Extend the -fmodule-file option to support the [<name>=]<file> value format.
If the name is omitted, then the old semantics is preserved (the module file
is loaded whether needed or not). If the name is specified, then the mapping
is treated as just another prebuilt module search mechanism, similar to
-fprebuilt-module-path, and the module file is only loaded if actually used
(e.g., via import). With one exception: this mapping also overrides module
file references embedded in other modules (which can be useful if module files
are moved/renamed as often happens during remote compilation).
This override semantics requires some extra work: we now store the module name
in addition to the file name in the serialized AST representation.
Reviewed By: rsmith
Differential Revision: https://reviews.llvm.org/D35020
llvm-svn: 312105
This reverts commit r298185, effectively reapplying r298165, after fixing the
new unit tests (PR32338). The memory buffer generator doesn't null-terminate
the MemoryBuffer it creates; this version of the commit informs getMemBuffer
about that to avoid the assert.
Original commit message follows:
----
Clang's internal build system for implicit modules uses lock files to
ensure that after a process writes a PCM it will read the same one back
in (without contention from other -cc1 commands). Since PCMs are read
from disk repeatedly while invalidating, building, and importing, the
lock is not released quickly. Furthermore, the LockFileManager is not
robust in every environment. Other -cc1 commands can stall until
timeout (after about eight minutes).
This commit changes the lock file from being necessary for correctness
to a (possibly dubious) performance hack. The remaining benefit is to
reduce duplicate work in competing -cc1 commands which depend on the
same module. Follow-up commits will change the internal build system to
continue after a timeout, and reduce the timeout. Perhaps we should
reconsider blocking at all.
This also fixes a use-after-free, when one part of a compilation
validates a PCM and starts using it, and another tries to swap out the
PCM for something new.
The PCMCache is a new type called MemoryBufferCache, which saves memory
buffers based on their filename. Its ownership is shared by the
CompilerInstance and ModuleManager.
- The ModuleManager stores PCMs there that it loads from disk, never
touching the disk if the cache is hot.
- When modules fail to validate, they're removed from the cache.
- When a CompilerInstance is spawned to build a new module, each
already-loaded PCM is assumed to be valid, and is frozen to avoid
the use-after-free.
- Any newly-built module is written directly to the cache to avoid the
round-trip to the filesystem, making lock files unnecessary for
correctness.
Original patch by Manman Ren; most testcases by Adrian Prantl!
llvm-svn: 298278
Clang's internal build system for implicit modules uses lock files to
ensure that after a process writes a PCM it will read the same one back
in (without contention from other -cc1 commands). Since PCMs are read
from disk repeatedly while invalidating, building, and importing, the
lock is not released quickly. Furthermore, the LockFileManager is not
robust in every environment. Other -cc1 commands can stall until
timeout (after about eight minutes).
This commit changes the lock file from being necessary for correctness
to a (possibly dubious) performance hack. The remaining benefit is to
reduce duplicate work in competing -cc1 commands which depend on the
same module. Follow-up commits will change the internal build system to
continue after a timeout, and reduce the timeout. Perhaps we should
reconsider blocking at all.
This also fixes a use-after-free, when one part of a compilation
validates a PCM and starts using it, and another tries to swap out the
PCM for something new.
The PCMCache is a new type called MemoryBufferCache, which saves memory
buffers based on their filename. Its ownership is shared by the
CompilerInstance and ModuleManager.
- The ModuleManager stores PCMs there that it loads from disk, never
touching the disk if the cache is hot.
- When modules fail to validate, they're removed from the cache.
- When a CompilerInstance is spawned to build a new module, each
already-loaded PCM is assumed to be valid, and is frozen to avoid
the use-after-free.
- Any newly-built module is written directly to the cache to avoid the
round-trip to the filesystem, making lock files unnecessary for
correctness.
Original patch by Manman Ren; most testcases by Adrian Prantl!
llvm-svn: 298165
If we never need to map any ID within the module to its global ID, we don't
need the module offset map. If a compilation transitively depends on lots of
unused module files, this can result in a modest performance improvement.
llvm-svn: 295517
Oops... r293393 started calling ReadSignature in
ModuleManager::addModule even when there was no ExpectedSignature.
Whether or not this would have a measurable performance impact (I
spotted this by inspection, and ReadSignature should be fairly fast), we
might as well get what we can. Add an extra check against
ExpectedSignature to avoid the hit.
llvm-svn: 293415
Invert the main branch in ModuleManager::addModule to return early and
reduce indentation, and clean up a bunch of logic as a result. I split
out a function called updateModuleImports to avoid triggering code
duplication.
llvm-svn: 293400
I don't have a testcase for this (and I'm not sure if it's an observable
bug), but it seems obviously wrong that ModuleManager::removeModules is
failing to clean up deleted modules from ModuleFile::Imports. See the
code in ModuleManager::addModule that inserts into ModuleFile::Imports;
we need the inverse operation.
llvm-svn: 293399
ModuleManager::removeModules always deletes a tail of the
ModuleManager::Chain. Change the API to enforce that so that we can
simplify the code inside.
There's no real functionality change, although there's a slight
performance hack to loop to the First deleted module instead of the
final module in the chain (skipping the about-to-be-deleted tail).
Also document something suspicious: we fail to clean deleted modules out
of ModuleFile::Imports.
llvm-svn: 293398
Hide the pointer indirection in ModuleManager::begin, ModuleManager::end,
ModuleManager::rbegin, and ModuleManager::rend. Besides tidying up the call
sites, this is preparation for making ownership of ModuleFile explicit.
llvm-svn: 293394
The main point is to move the delete-the-new-module logic into the same block
that creates it, so I can simplify the memory management in a follow-up, but I
think it's clearer to use use a checkSignature helper here anyway.
There is a minor functionality change: we now scan ahead to pull the signature
out of the control block *only* if this is a new ModuleFile. For old ones,
ASTReader::ReadControlBlock will have already read the signature.
llvm-svn: 293393
As proposed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-October/106630.html
Move block info block state to a new class, BitstreamBlockInfo.
Clients may set the block info for a particular cursor with the
BitstreamCursor::setBlockInfo() method.
At this point BitstreamReader is not much more than a container for an
ArrayRef<uint8_t>, so remove it and replace all uses with direct uses
of memory buffers.
Differential Revision: https://reviews.llvm.org/D26259
llvm-svn: 286207
look for a corresponding file, since we're not going to read it anyway.
No observable behavior change (though we now avoid pointlessly trying to stat
or open a file named "-").
llvm-svn: 280436
during this function, and to avoid rolling back changes to the module manager's
data structures. Instead, we defer registering the module file until after we
have successfully finished loading it.
llvm-svn: 280434
In this mode, there is no need to load any module map and the programmer can
simply use "@import" syntax to load the module directly from a prebuilt
module path. When loading from prebuilt module path, we don't support
rebuilding of the module files and we ignore compatible configuration
mismatches.
rdar://27290316
Differential Revision: http://reviews.llvm.org/D23125
llvm-svn: 279096
David Blaikie