This fixes a couple of unflushed raw_string_ostream bugs in recent
commits that only show up on a bot building on windows with expensive
checks.
Differential Revision: https://reviews.llvm.org/D59396
Change-Id: I9c6208325503b3ee0786b4b688e13fc24a15babf
llvm-svn: 356394
This reinstates r347934, along with a tweak to address a problem with
PHI node ordering that that commit created (or exposed). (That commit
was reverted at r348426, due to the PHI node issue.)
Original commit message:
r320789 suppressed moving the insertion point of SCEV expressions with
dev/rem operations to the loop header in non-loop-invariant situations.
This, and similar, hoisting is also unsafe in the loop-invariant case,
since there may be a guard against a zero denominator. This is an
adjustment to the fix of r320789 to suppress the movement even in the
loop-invariant case.
This fixes PR30806.
Differential Revision: https://reviews.llvm.org/D57428
llvm-svn: 356392
It uses the generic AArch64_IMM::expandMOVImm to get the correct
number of instruction used in immediate materialization.
Reviewers: efriedma
Differential Revision: https://reviews.llvm.org/D58461
llvm-svn: 356391
This patch follows some ideas from r352866 to optimize the floating
point materialization even further. It changes isFPImmLegal to
considere up to 2 mov instruction or up to 5 in case subtarget has
fused literals.
The rationale is the cost is the same for mov+fmov vs. adrp+ldr; but
the mov+fmov sequence is always better because of the reduced d-cache
pressure. The timings are still the same if you consider movw+movk+fmov
vs. adrp+ldr will be fused (although one instruction longer).
Reviewers: efriedma
Differential Revision: https://reviews.llvm.org/D58460
llvm-svn: 356390
This allows better code size for aarch64 floating point materialization
in a future patch.
Reviewers: evandro
Differential Revision: https://reviews.llvm.org/D58690
llvm-svn: 356389
It splits the login of actual instruction emission away from the logic
that figures out the appropriate sequence on AArch64ExpandPseudo::expandMOVImm.
The new function AArch64_IMM::expandMOVImm, which return the list of the
instructions to materialize the immediate constant, is implemented on a
separated unit because it will be used in a subsequent patch to optimize
floating point materialization.
Reviewers: efriedma
Differential Revision: https://reviews.llvm.org/D58915
llvm-svn: 356387
Delete temporarily constructed node uses for analysis after it's use,
holding onto original input nodes. Ideally this would be rewritten
without making nodes, but this appears relatively complex.
Reviewers: spatel, RKSimon, craig.topper
Subscribers: jdoerfert, hiraditya, deadalnix, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57921
llvm-svn: 356382
It seems to pass fine on my Mac, and it running it only on Windows made
me miss it in r355959 and required r355959.
When the test was added in r288992 we still used Win-only
UnDecorateSymbolName() for demangling. Now we use LLVM's
microsoftDemangle() which is cross-platform.
Differential Revision: https://reviews.llvm.org/D59497
llvm-svn: 356380
Even though the header makes the exact same check since https://llvm.org/D59063,
the headers could conceivably change in the future and introduce a bug.
llvm-svn: 356376
Add an experimental buffer fat pointer address space that is currently
unhandled in the backend. This commit reserves address space 7 as a
non-integral pointer repsenting the 160-bit fat pointer (128-bit buffer
descriptor + 32-bit offset) that is heavily used in graphics workloads
using the AMDGPU backend.
Differential Revision: https://reviews.llvm.org/D58957
llvm-svn: 356373
Follow-up to:
rL356338
rL356369
We can calculate an arbitrary vector constant minus the bitwidth, so there's
no need to limit this transform to scalars and splats.
llvm-svn: 356372
This fixes the https://bugs.llvm.org/show_bug.cgi?id=40980.
Previously if string optimization occurred as a result of
StringTableBuilder's finalize() method, the size wasn't updated.
This hopefully also makes the interaction between sections during finalization
processes a bit more clear.
Differential revision: https://reviews.llvm.org/D59488
llvm-svn: 356371
Follow-up to:
rL356338
Rotates are a special case of funnel shift where the 2 input operands
are the same value, but that does not need to be a restriction for the
canonicalization when the shift amount is a constant.
llvm-svn: 356369
Summary:
-ignore specifies a list of PP callbacks to ignore. It cannot express a
whitelist, which may be more useful than a blacklist.
Add a new option -callbacks to replace it.
-ignore= (default) => -callbacks='*' (default)
-ignore=FileChanged,FileSkipped => -callbacks='*,-FileChanged,-FileSkipped'
-callbacks='Macro*' : print only MacroDefined,MacroExpands,MacroUndefined,...
Reviewers: juliehockett, aaron.ballman, alexfh, ioeric
Reviewed By: aaron.ballman
Subscribers: nemanjai, kbarton, jsji, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D59296
llvm-svn: 356366
Results in much nicer -help output:
```
$ ./bin/llvm-exegesis -help
USAGE: llvm-exegesis [options]
OPTIONS:
Color Options:
-color - Use colors in output (default=autodetect)
General options:
-enable-cse-in-irtranslator - Should enable CSE in irtranslator
-enable-cse-in-legalizer - Should enable CSE in Legalizer
Generic Options:
-help - Display available options (-help-hidden for more)
-help-list - Display list of available options (-help-list-hidden for more)
-version - Display the version of this program
llvm-exegesis analysis options:
-analysis-clustering-epsilon=<number> - dbscan epsilon for benchmark point clustering
-analysis-clusters-output-file=<string> -
-analysis-display-unstable-clusters - if there is more than one benchmark for an opcode, said benchmarks may end up not being clustered into the same cluster if the measured performance characteristics are different. by default all such opcodes are filtered out. this flag will instead show only such unstable opcodes
-analysis-inconsistencies-output-file=<string> -
-analysis-inconsistency-epsilon=<number> - epsilon for detection of when the cluster is different from the LLVM schedule profile values
-analysis-numpoints=<uint> - minimum number of points in an analysis cluster
llvm-exegesis benchmark options:
-ignore-invalid-sched-class - ignore instructions that do not define a sched class
-mode=<value> - the mode to run
=latency - Instruction Latency
=inverse_throughput - Instruction Inverse Throughput
=uops - Uop Decomposition
=analysis - Analysis
-num-repetitions=<uint> - number of time to repeat the asm snippet
-opcode-index=<int> - opcode to measure, by index
-opcode-name=<string> - comma-separated list of opcodes to measure, by name
-snippets-file=<string> - code snippets to measure
llvm-exegesis options:
-benchmarks-file=<string> - File to read (analysis mode) or write (latency/uops/inverse_throughput modes) benchmark results. “-” uses stdin/stdout.
-mcpu=<string> - cpu name to use for pfm counters, leave empty to autodetect
```
llvm-svn: 356364
Summary:
Look past bitcasts when looking for parameter debug values that are
described by frame-index loads in `EmitFuncArgumentDbgValue()`.
In the attached test case we would be left with an undef `DBG_VALUE`
for the parameter without this patch.
A similar fix was done for parameters passed in registers in D13005.
This fixes PR40777.
Reviewers: aprantl, vsk, jmorse
Reviewed By: aprantl
Subscribers: bjope, javed.absar, jdoerfert, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D58831
llvm-svn: 356363
Summary:
This is a preparatory step to enable adding of unwind plans by symbol
file plugins.
Although at the surface it seems that currently symbol files have
nothing to do with unwinding, this isn't entirely correct even now. The
mere act of adding a symbol file can have the effect of making more
sections (typically .debug_frame) available to the unwinding machinery,
so that it can have more unwind strategies to choose from.
Up until now, we've had a bug, which went largely unnoticed, where
unwind info in the manually added symbols files (target symbols add) was
being ignored during unwinding. Reinitializing the UnwindTable fixes
that bug too.
Reviewers: clayborg, jasonmolenda, alexshap
Subscribers: jdoerfert, lldb-commits
Differential Revision: https://reviews.llvm.org/D58347
llvm-svn: 356361
Fixes https://bugs.llvm.org/show_bug.cgi?id=35094
The Dead register definition pass should leave alone the atomicrmw
instructions on AArch64 (LTE extension). The reason is the following
statement in the Arm ARM:
"The ST<OP> instructions, and LD<OP> instructions where the destination
register is WZR or XZR, are not regarded as doing a read for the purpose
of a DMB LD barrier."
A good example was given in the gcc thread by Will Deacon (linked in the
bugzilla ticket 35094):
P0 (atomic_int* y,atomic_int* x) {
atomic_store_explicit(x,1,memory_order_relaxed);
atomic_thread_fence(memory_order_release);
atomic_store_explicit(y,1,memory_order_relaxed);
}
P1 (atomic_int* y,atomic_int* x) {
atomic_fetch_add_explicit(y,1,memory_order_relaxed); // STADD
atomic_thread_fence(memory_order_acquire);
int r0 = atomic_load_explicit(x,memory_order_relaxed);
}
P2 (atomic_int* y) {
int r1 = atomic_load_explicit(y,memory_order_relaxed);
}
My understanding is that it is forbidden for r0 == 0 and r1 == 2 after
this test has executed. However, if the relaxed add in P1 compiles to
STADD and the subsequent acquire fence is compiled as DMB LD, then we
don't have any ordering guarantees in P1 and the forbidden result could
be observed.
Change-Id: I419f9f9df947716932038e1100c18d10a96408d0
llvm-svn: 356360
These were added in r355423.
We only use the autogenerated table to assist with the maintenance of the
manual table. These entries are alreayd in the manual table.
llvm-svn: 356357
These are used to help convert OR->LEA when needed to avoid avoid a copy. They
aren't need after register allocation.
Happens to remove an ugly goto from X86MCCodeEmitter.cpp
llvm-svn: 356356
The only thing the print methods currently need to know is the string to print for the memory size in intel syntax.
This patch merges the functions based on this string. If we ever need something else in the future, its easy to split them back out.
This reduces the number of cases in the assembly printers. It shrinks the intel printer to only use 7 bytes per instruction instead of 8.
llvm-svn: 356352
AMDGPU would like to use these MVTs.
Differential Revision: https://reviews.llvm.org/D58901
Change-Id: I6125fea810d7cc62a4b4de3d9904255a1233ae4e
llvm-svn: 356351
AMDGPU would like to have MVTs for v3i32, v3f32, v5i32, v5f32. This
commit does not add them, but makes preparatory changes:
* Exclude non-legal non-power-of-2 vector types from ComputeRegisterProp
mechanism in TargetLoweringBase::getTypeConversion.
* Cope with SETCC and VSELECT for odd-width i1 vector when the other
vectors are legal type.
Some of this patch is from Matt Arsenault, also of AMD.
Differential Revision: https://reviews.llvm.org/D58899
Change-Id: Ib5f23377dbef511be3a936211a0b9f94e46331f8
llvm-svn: 356350
There are a few different issues, mostly stemming from using
generation based checks for anything instead of subtarget
features. Stop adding flat-address-space as a feature for HSA, as it
should only be a device property. This was incorrectly allowing flat
instructions to select for SI.
Increase the default generation for HSA to avoid the encoding error
when emitting objects. This has some other side effects from various
checks which probably should be separate subtarget features (in the
cost model and for dealing with the DS offset folding issue).
Partial fix for bug 41070. It should probably be an error to try using
amdhsa without flat support.
llvm-svn: 356347
This is the same change as rL356290, but for signed add. It replaces
the existing ripple logic with the overflow logic in ConstantRange.
This is NFC in that it should return NeverOverflow in exactly the
same cases as the previous implementation. However, it does make
computeOverflowForSignedAdd() more powerful by now also determining
AlwaysOverflows conditions. As none of its consumers handle this yet,
this has no impact on optimization. Making use of AlwaysOverflows
in with.overflow folding will be handled as a followup.
Differential Revision: https://reviews.llvm.org/D59450
llvm-svn: 356345
Previously we had a regular form of the instruction used when the immediate was 0-7. And _alt form that allowed the full 8 bit immediate. Codegen would always use the 0-7 form since the immediate was always checked to be in range. Assembly parsing would use the 0-7 form when a mnemonic like vpcomtrueb was used. If the immediate was specified directly the _alt form was used. The disassembler would prefer to use the 0-7 form instruction when the immediate was in range and the _alt form otherwise. This way disassembly would print the most readable form when possible.
The assembly parsing for things like vpcomtrueb relied on splitting the mnemonic into 3 pieces. A "vpcom" prefix, an immediate representing the "true", and a suffix of "b". The tablegenerated printing code would similarly print a "vpcom" prefix, decode the immediate into a string, and then print "b".
The _alt form on the other hand parsed and printed like any other instruction with no specialness.
With this patch we drop to one form and solve the disassembly printing issue by doing custom printing when the immediate is 0-7. The parsing code has been tweaked to turn "vpcomtrueb" into "vpcomb" and then the immediate for the "true" is inserted either before or after the other operands depending on at&t or intel syntax.
I'd rather not do the custom printing, but I tried using an InstAlias for each possible mnemonic for all 8 immediates for all 16 combinations of element size, signedness, and memory/register. The code emitted into printAliasInstr ended up checking the number of operands, the register class of each operand, and the immediate for all 256 aliases. This was repeated for both the at&t and intel printer. Despite a lot of common checks between all of the aliases, when compiled with clang at least this commonality was not well optimized. Nor do all the checks seem necessary. Since I want to do a similar thing for vcmpps/pd/ss/sd which have 32 immediate values and 3 encoding flavors, 3 register sizes, etc. This didn't seem to scale well for clang binary size. So custom printing seemed a better trade off.
I also considered just using the InstAlias for the matching and not the printing. But that seemed like it would add a lot of extra rows to the matcher table. Especially given that the 32 immediates for vpcmpps have 46 strings associated with them.
Differential Revision: https://reviews.llvm.org/D59398
llvm-svn: 356343
Tim Renouf