Rotate with explicit immediate is a single uop from Haswell on. An immediate of 1 has a dependency on the previous writer of flags, but the other immediate values do not.
The implicit rotate by 1 instruction is 2 uops. But the flags are merged after the rotate uop so the data result does not see the flag dependency. But I don't think we have any way of modeling that.
RORX is 1 uop without the load. 2 uops with the load. We currently model these with WriteShift/WriteShiftLd.
Differential Revision: https://reviews.llvm.org/D59077
llvm-svn: 355636
Haswell and possibly Sandybridge have an optimization for ADC/SBB with immediate 0 to use a single uop flow. This only applies GR16/GR32/GR64 with an 8-bit immediate. It does not apply to GR8. It also does not apply to the implicit AX/EAX/RAX forms.
Differential Revision: https://reviews.llvm.org/D59058
llvm-svn: 355635
Summary:
Since bottleneck hints are enabled via user request, it can be
confusing if no bottleneck information is presented. Such is the
case when no bottlenecks are identified. This patch emits a message
in that case.
Reviewers: andreadb
Reviewed By: andreadb
Subscribers: tschuett, gbedwell, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59098
llvm-svn: 355628
This patch adds a new flag named -bottleneck-analysis to print out information
about throughput bottlenecks.
MCA knows how to identify and classify dynamic dispatch stalls. However, it
doesn't know how to analyze and highlight kernel bottlenecks. The goal of this
patch is to teach MCA how to correlate increases in backend pressure to backend
stalls (and therefore, the loss of throughput).
From a Scheduler point of view, backend pressure is a function of the scheduler
buffer usage (i.e. how the number of uOps in the scheduler buffers changes over
time). Backend pressure increases (or decreases) when there is a mismatch
between the number of opcodes dispatched, and the number of opcodes issued in
the same cycle. Since buffer resources are limited, continuous increases in
backend pressure would eventually leads to dispatch stalls. So, there is a
strong correlation between dispatch stalls, and how backpressure changed over
time.
This patch teaches how to identify situations where backend pressure increases
due to:
- unavailable pipeline resources.
- data dependencies.
Data dependencies may delay execution of instructions and therefore increase the
time that uOps have to spend in the scheduler buffers. That often translates to
an increase in backend pressure which may eventually lead to a bottleneck.
Contention on pipeline resources may also delay execution of instructions, and
lead to a temporary increase in backend pressure.
Internally, the Scheduler classifies instructions based on whether register /
memory operands are available or not.
An instruction is marked as "ready to execute" only if data dependencies are
fully resolved.
Every cycle, the Scheduler attempts to execute all instructions that are ready
to execute. If an instruction cannot execute because of unavailable pipeline
resources, then the Scheduler internally updates a BusyResourceUnits mask with
the ID of each unavailable resource.
ExecuteStage is responsible for tracking changes in backend pressure. If backend
pressure increases during a cycle because of contention on pipeline resources,
then ExecuteStage sends a "backend pressure" event to the listeners.
That event would contain information about instructions delayed by resource
pressure, as well as the BusyResourceUnits mask.
Note that ExecuteStage also knows how to identify situations where backpressure
increased because of delays introduced by data dependencies.
The SummaryView observes "backend pressure" events and prints out a "bottleneck
report".
Example of bottleneck report:
```
Cycles with backend pressure increase [ 99.89% ]
Throughput Bottlenecks:
Resource Pressure [ 0.00% ]
Data Dependencies: [ 99.89% ]
- Register Dependencies [ 0.00% ]
- Memory Dependencies [ 99.89% ]
```
A bottleneck report is printed out only if increases in backend pressure
eventually caused backend stalls.
About the time complexity:
Time complexity is linear in the number of instructions in the
Scheduler::PendingSet.
The average slowdown tends to be in the range of ~5-6%.
For memory intensive kernels, the slowdown can be significant if flag
-noalias=false is specified. In the worst case scenario I have observed a
slowdown of ~30% when flag -noalias=false was specified.
We can definitely recover part of that slowdown if we optimize class LSUnit (by
doing extra bookkeeping to speedup queries). For now, this new analysis is
disabled by default, and it can be enabled via flag -bottleneck-analysis. Users
of MCA as a library can enable the generation of pressure events through the
constructor of ExecuteStage.
This patch partially addresses https://bugs.llvm.org/show_bug.cgi?id=37494
Differential Revision: https://reviews.llvm.org/D58728
llvm-svn: 355308
Dispatch stall cycles may be associated to multiple dispatch stall events.
Before this patch, each stall cycle was associated with a single stall event.
This patch also improves a couple of code comments, and adds a helper method to
query the Scheduler for dispatch stalls.
llvm-svn: 354877
Summary:
The AX/EAX/RAX with immediate forms are 2 uops just like the AL with immediate.
The modrm form with r8 and immediate is a single uop just like r16/r32/r64 with immediate.
Reviewers: RKSimon, andreadb
Reviewed By: RKSimon
Subscribers: gbedwell, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58581
llvm-svn: 354754
This patch fixes a bug where register writes performed by optimizable register
moves were sometimes wrongly treated like partial register updates. Before this
patch, llvm-mca wrongly predicted a 1.50 IPC for test reg-move-elimination-6.s
(added by this patch). With this patch, llvm-mca correctly updates the register
defintions in the PRF, and the IPC for that test is now correctly reported as 2.
llvm-svn: 354271
All of these instructions consume one encoded register and the other register is %st. They either write the result to %st or the encoded register. Previously we printed both arguments when the encoded register was written. And we printed one argument when the result was written to %st. For the stack popping forms the encoded register is always the destination and we didn't print both operands. This was inconsistent with gcc and objdump and just makes the output assembly code harder to read.
This patch changes things to always print both operands making us consistent with gcc and objdump. The parser should still be able to handle the single register forms just as it did before. This also matches the GNU assembler behavior.
llvm-svn: 353061
Looking into gcc and objdump behavior more this was overly aggressive. If the register is encoded in the instruction we should print %st(0), if its implicit we should print %st.
I'll be making a more directed change in a future patch.
llvm-svn: 353013
Summary:
When calculating clobbers for MS style inline assembly we fail if the asm clobbers stack top because we print st(0) and try to pass it through the gcc register name check. This was found with when I attempted to make a emms/femms clobber all ST registers. If you use emms/femms in MS inline asm we would try to use st(0) as the clobber name but clang would think that wasn't a valid clobber name.
This also matches what objdump disassembly prints. It's also what is printed by gcc -S.
Reviewers: RKSimon, rnk, efriedma, spatel, andreadb, lebedev.ri
Reviewed By: rnk
Subscribers: eraman, gbedwell, lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D57621
llvm-svn: 352985
Summary:
I'm unable to find this number in the "AMD SOG for family 15h".
llvm-exegesis measures the latencies of these instructions as `2`,
which matches the latencies specified in "AMD SOG for family 15h".
However if we look at Agner, Microarchitecture, "AMD Bulldozer, Piledriver,
Steamroller and Excavator pipeline", "Data delay between different execution
domains", the int->ivec transfer is listed as `8`..`10`cy of additional latency.
Also, Agner's "Instruction tables", for Piledriver, lists their latencies as `12`,
which is consistent with `2cy` from exegesis / AMD SOG + `10cy` transfer delay.
Additional data point comes from the fact that Agner's "Instruction tables",
for Jaguar, lists their latencies as `8`; and "AMD SOG for family 16h" does
state the `+6cy` int->ivec delay, which is consistent with instr latency of `1` or `2`.
Reviewers: andreadb, RKSimon, craig.topper
Reviewed By: andreadb
Subscribers: gbedwell, courbet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57300
llvm-svn: 352861
Account for bypass delays when computing the latency of scalar int-to-float
conversions.
On Jaguar we need to account for an extra 6cy latency (see AMD fam16h SOG).
This patch also fixes the number of micropcodes for the register-memory variants
of scalar int-to-float conversions.
Differential Revision: https://reviews.llvm.org/D57148
llvm-svn: 352518
Match the coverage of test\CodeGen\X86\avx512-shuffle-schedule.ll so we can get rid of -print-schedule (and fix PR37160) without losing schedule tests
llvm-svn: 352179
This patch adds a new ReadAdvance definition named ReadInt2Fpu.
ReadInt2Fpu allows x86 scheduling models to accurately describe delays caused by
data transfers from the integer unit to the floating point unit.
ReadInt2Fpu currently defaults to a delay of zero cycles (i.e. no delay) for all
x86 models excluding BtVer2. That means, this patch is only a functional change
for the Jaguar cpu model only.
Tablegen definitions for instructions (V)PINSR* have been updated to account for
the new ReadInt2Fpu. That read is mapped to the the GPR input operand.
On Jaguar, int-to-fpu transfers are modeled as a +6cy delay. Before this patch,
that extra delay was added to the opcode latency. In practice, the insert opcode
only executes for 1cy. Most of the actual latency is actually contributed by the
so-called operand-latency. According to the AMD SOG for family 16h, (V)PINSR*
latency is defined by expression f+1, where f is defined as a forwarding delay
from the integer unit to the fpu.
When printing instruction latency from MCA (see InstructionInfoView.cpp) and LLC
(only when flag -print-schedule is speified), we now need to account for any
extra forwarding delays. We do this by checking if scheduling classes declare
any negative ReadAdvance entries. Quoting a code comment in TargetSchedule.td:
"A negative advance effectively increases latency, which may be used for
cross-domain stalls". When computing the instruction latency for the purpose of
our scheduling tests, we now add any extra delay to the formula. This avoids
regressing existing codegen and mca schedule tests. It comes with the cost of an
extra (but very simple) hook in MCSchedModel.
Differential Revision: https://reviews.llvm.org/D57056
llvm-svn: 351965
Ensure we keep avx512f/bw/dq + vl versions separate, add example broadcast tests - this should allow us to better the test coverage of test\CodeGen\X86\avx512-schedule.ll
llvm-svn: 351848
We're getting pretty close to matching/exceeding test coverage of the test\CodeGen\X86\*-schedule.ll files, which should allow us to get rid of -print-schedule and fix PR37160
llvm-svn: 351836
Similar to horizontal ops on D56777, the sse2 (but not mmx) bit shift ops has local forwarding disabled, adding +1cy to the use latency for the result.
Differential Revision: https://reviews.llvm.org/D57026
llvm-svn: 351817
Similar to horizontal ops on D56777, the vpermilpd/vpermilps variable mask ops has local forwarding disabled, adding +1cy to the use latency for the result.
Differential Revision: https://reviews.llvm.org/D57022
llvm-svn: 351815
D56777 added +1cy local forwarding penalty for horizontal operations, but this penalty only affects sse2/xmm variants, the mmx variants don't suffer the penalty.
Confirmed with @andreadb
llvm-svn: 351755
r327630 introduced new write definitions for float/vector loads.
Before that revision, WriteLoad was used by both integer/float (scalar/vector)
load. So, WriteLoad had to conservatively declare a latency to 5cy. That is
because the load-to-use latency for float/vector load is 5cy.
Now that we have dedicated writes for float/vector loads, there is no reason why
we should keep the latency of WriteLoad to 5cy. At the moment, WriteLoad is only
used by scalar integer loads only; we can assume an optimstic 3cy latency for
them.
This patch changes that latency from 5cy to 3cy, and regenerates the affected
scheduling/mca tests.
Differential Revision: https://reviews.llvm.org/D56922
llvm-svn: 351742
On Jaguar, horizontal adds/subs have local forwarding disable.
That means, we pay a compulsory extra cycle of write-back stage, and the value
is not available until the end of that stage.
This patch changes the latency of horizontal operations by adding an extra
cycle. With this patch, latency numbers now match what is reported by perf.
I plan to send another patch to also 'fix' the latency of shuffle operations (on
Jaguar, local forwarding is disabled for vector shuffles too).
Differential Revision: https://reviews.llvm.org/D56777
llvm-svn: 351366
Class InstrBuilder wrongly assumed that llvm targets were always able to return
a non-null pointer when createMCInstrAnalysis() was called on them.
This was causing crashes when simulating executions for targets that don't
provide an MCInstrAnalysis object.
This patch fixes the issue by making MCInstrAnalysis optional.
llvm-svn: 349352
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, for the Exynos processors.
Differential revision: https://reviews.llvm.org/D55345
llvm-svn: 348774
It was failing as below. Adding a triple seems to help.
--
: 'RUN: at line 2'; /work/llvm.combined/build.release/bin/llvm-mca -march=aarch64 -mcpu=exynos-m1 -resource-pressure=false < /work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s | /work/llvm.combined/build.release/bin/FileCheck /work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s -check-prefixes=ALL,M1
: 'RUN: at line 3'; /work/llvm.combined/build.release/bin/llvm-mca -march=aarch64 -mcpu=exynos-m3 -resource-pressure=false < /work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s | /work/llvm.combined/build.release/bin/FileCheck /work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s -check-prefixes=ALL,M3
--
Exit Code: 1
Command Output (stderr):
--
/work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s:36:12: error: M1-NEXT: expected string not found in input
^
<stdin>:21:2: note: scanning from here
1 0 0.25 b Ltmp0
^
--
llvm-svn: 348577
This patch adds the ability to specify via tablegen which processor resources
are load/store queue resources.
A new tablegen class named MemoryQueue can be optionally used to mark resources
that model load/store queues. Information about the load/store queue is
collected at 'CodeGenSchedule' stage, and analyzed by the 'SubtargetEmitter' to
initialize two new fields in struct MCExtraProcessorInfo named `LoadQueueID` and
`StoreQueueID`. Those two fields are identifiers for buffered resources used to
describe the load queue and the store queue.
Field `BufferSize` is interpreted as the number of entries in the queue, while
the number of units is a throughput indicator (i.e. number of available pickers
for loads/stores).
At construction time, LSUnit in llvm-mca checks for the presence of extra
processor information (i.e. MCExtraProcessorInfo) in the scheduling model. If
that information is available, and fields LoadQueueID and StoreQueueID are set
to a value different than zero (i.e. the invalid processor resource index), then
LSUnit initializes its LoadQueue/StoreQueue based on the BufferSize value
declared by the two processor resources.
With this patch, we more accurately track dynamic dispatch stalls caused by the
lack of LS tokens (i.e. load/store queue full). This is also shown by the
differences in two BdVer2 tests. Stalls that were previously classified as
generic SCHEDULER FULL stalls, are not correctly classified either as "load
queue full" or "store queue full".
About the differences in the -scheduler-stats view: those differences are
expected, because entries in the load/store queue are not released at
instruction issue stage. Instead, those are released at instruction executed
stage. This is the main reason why for the modified tests, the load/store
queues gets full before PdEx is full.
Differential Revision: https://reviews.llvm.org/D54957
llvm-svn: 347857
This change is in preparation for a patch that fixes PR36666.
llvm-mca currently doesn't know if a buffered processor resource describes a
load or store queue. So, any dynamic dispatch stall caused by the lack of
load/store queue entries is normally reported as a generic SCHEDULER stall. See for
example the -dispatch-stats output from the two tests modified by this patch.
In future, processor models will be able to tag processor resources that are
used to describe load/store queues. That information would then be used by
llvm-mca to correctly classify dynamic dispatch stalls caused by the lack of
tokens in the LS.
llvm-svn: 347662
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, `AArch64InstrInfo::hasShiftedReg()`.
Differential revision: https://reviews.llvm.org/D54820
llvm-svn: 347598
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, `AArch64InstrInfo::isScaledAddr()`
Differential revision: https://reviews.llvm.org/D54777
llvm-svn: 347597
By default, llvm-mca conservatively assumes that a register operand from the
variadic sequence is both a register read and a register write. That is because
MCInstrDesc doesn't describe extra variadic operands; we don't have enough
dataflow information to tell which register operands from the variadic sequence
is a definition, and which is a use instead.
However, if a variadic instruction is flagged 'mayStore' (but not 'mayLoad'),
and it has no 'unmodeledSideEffects', then llvm-mca (very) optimistically
assumes that any register operand in the variadic sequence is a register read
only. Conversely, if a variadic instruction is marked as 'mayLoad' (but not
'mayStore'), and it has no 'unmodeledSideEffects', then llvm-mca optimistically
assumes that any extra register operand is a register definition only.
These assumptions work quite well for variadic load/store multiple instructions
defined by the ARM backend.
llvm-svn: 347522
`llvm-mca` relies on the predicates to be based on `MCSchedPredicate` in order
to resolve the scheduling for variant instructions. Otherwise, it aborts
the building of the instruction model early.
However, the scheduling model emitter in `TableGen` gives up too soon, unless
all processors use only such predicates.
In order to allow more processors to be used with `llvm-mca`, this patch
emits scheduling transitions if any processor uses these predicates. The
transition emitted for the processors using legacy predicates is the one
specified with `NoSchedPred`, which is based on `MCSchedPredicate`.
Preferably, `llvm-mca` should instead assume a reasonable default when a
variant transition is not based on `MCSchedPredicate` for a given processor.
This issue should be revisited in the future.
Differential revision: https://reviews.llvm.org/D54648
llvm-svn: 347504
With this change, InstrBuilder emits an error if the MCInst sequence contains an
instruction with a variadic opcode, and a non-zero number of variadic operands.
Currently we don't know how to correctly analyze variadic opcodes. The problem
with variadic operands is that there is no information for them in the opcode
descriptor (i.e. MCInstrDesc). That means, we don't know which variadic operands
are defs, and which are uses.
In future, we could try to conservatively assume that any extra register
operands is both a register use and a register definition.
This patch fixes a subtle bug in the evaluation of read/write operands for ARM
VLD1 with implicit index update. Added test vld1-index-update.s
llvm-svn: 347503
RetireControlUnitStatistics now reports extra information about the ROB and the
avg/maximum number of entries consumed over the entire simulation.
Example:
Retire Control Unit - number of cycles where we saw N instructions retired:
[# retired], [# cycles]
0, 109 (17.9%)
1, 102 (16.7%)
2, 399 (65.4%)
Total ROB Entries: 64
Max Used ROB Entries: 35 ( 54.7% )
Average Used ROB Entries per cy: 32 ( 50.0% )
Documentation in llvm/docs/CommandGuide/llvmn-mca.rst has been updated to
reflect this change.
llvm-svn: 347493
This patch fixes an invalid memory read introduced by r346487.
Before this patch, partial register write had to query the latency of the
dependent full register write by calling a method on the full write descriptor.
However, if the full write is from an already retired instruction, chances are
that the EntryStage already reclaimed its memory.
In some parial register write tests, valgrind was reporting an invalid
memory read.
This change fixes the invalid memory access problem. Writes are now responsible
for tracking dependent partial register writes, and notify them in the event of
instruction issued.
That means, partial register writes no longer need to query their associated
full write to check when they are ready to execute.
Added test X86/BtVer2/partial-reg-update-7.s
llvm-svn: 347459
When looking at the tests committed by Roman at r346587, I noticed that numbers
reported by the resource pressure for PdAGU01 were wrong.
In particular, according to the aut-generated CHECK lines in tests
memcpy-like-test.s and store-throughput.s, resource pressure for PdAGU01
was not uniformly distributed among the two AGEN pipes.
It turns out that the reason why pressure was not correctly distributed, was
because the "resource selection strategy" object associated with PdAGU01 was not
correctly updated on the event of AGEN pipe used.
As a result, llvm-mca was not simulating a round-robin pipeline allocation for
PdAGU01. Instead, PdAGU1 was always prioritized over PdAGU0.
This patch fixes the issue; now processor resource strategy objects for
resources declaring multiple units, are correctly notified in the event of
"resource used".
llvm-svn: 346650
There are two AGU units, and per 1cy, there can be either two loads,
or a load and a store; but not two stores, or two loads and a store.
Additionally, loads shouldn't affect the store scheduler and vice versa.
(but *should* affect the PdEX scheduler.)
Required rL346545.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39465
llvm-svn: 346587
As noted by Andrea Di Biagio in https://bugs.llvm.org/show_bug.cgi?id=39465
both the loads and stores occupy both the store and load queues.
This is clearly wrong.
llvm-svn: 346425
During review it was noted that while it appears that
the Piledriver can do two [consecutive] loads per cycle,
it can only do one store per cycle. It was suggested
that the sched model incorrectly models that,
but it was opted to fix this afterwards.
These tests show that the two consecutive loads are
modelled correctly, and one consecutive stores is not
modelled incorrectly. Unless i'm missing the point.
https://bugs.llvm.org/show_bug.cgi?id=39465
llvm-svn: 346404
This patch teaches view RegisterFileStatistics how to report events for
optimizable register moves.
For each processor register file, view RegisterFileStatistics reports the
following extra information:
- Number of optimizable register moves
- Number of register moves eliminated
- Number of zero moves (i.e. register moves that propagate a zero)
- Max Number of moves eliminated per cycle.
Differential Revision: https://reviews.llvm.org/D53976
llvm-svn: 345865
Adding the baseline tests in a preparatory NFC commit,
so that the actual commit shows the *diff*.
Yes, i'm aware that a few of these codegen-based sched tests
are testing wrong instructions, i will fix that afterwards.
For https://reviews.llvm.org/D52779
llvm-svn: 345462
Summary:
This renames the IsParsingMSInlineAsm member variable of AsmLexer to
LexMasmIntegers and moves it up to MCAsmLexer. This is the only behavior
controlled by that variable. I added a public setter, so that it can be
set from outside or from the llvm-mc command line. We may need to
arrange things so that users can get this behavior from clang, but
that's future work.
I also put additional hex literal lexing functionality under this flag
to fix PR32973. It appears that this hex literal parsing wasn't intended
to be enabled in non-masm-style blocks.
Now, masm integers (0b1101 and 0ABCh) work in __asm blocks from clang,
but 0b label references work when using .intel_syntax in standalone .s
files.
However, 0b label references will *not* work from __asm blocks in clang.
They will work from GCC inline asm blocks, which it sounds like is
important for Crypto++ as mentioned in PR36144.
Essentially, we only lex masm literals for inline asm blobs that use
intel syntax. If the .intel_syntax directive is used inside a gnu-style
inline asm statement, masm literals will not be lexed, which is
compatible with gas and llvm-mc standalone .s assembly.
This fixes PR36144 and PR32973.
Reviewers: Gerolf, avt77
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D53535
llvm-svn: 345189
A new class named InstructionError has been added to Support.h in order to
improve the error reporting from class InstrBuilder.
The llvm-mca driver is responsible for handling InstructionError objects, and
printing them out to stderr.
The goal of this patch is to remove all the remaining error handling logic from
the library code.
In particular, this allows us to:
- Simplify the logic in InstrBuilder by removing a needless dependency from
MCInstrPrinter.
- Centralize all the error halding logic in a new function named 'runPipeline'
(see llvm-mca.cpp).
This is also a first step towards generalizing class InstrBuilder, so that in
future, we will be able to reuse its logic to also "lower" MachineInstr to
mca::Instruction objects.
Differential Revision: https://reviews.llvm.org/D53585
llvm-svn: 345129
This patch adds the ability to identify instructions that are "move elimination
candidates". It also allows scheduling models to describe processor register
files that allow move elimination.
A move elimination candidate is an instruction that can be eliminated at
register renaming stage.
Each subtarget can specify which instructions are move elimination candidates
with the help of tablegen class "IsOptimizableRegisterMove" (see
llvm/Target/TargetInstrPredicate.td).
For example, on X86, BtVer2 allows both GPR and MMX/SSE moves to be eliminated.
The definition of 'IsOptimizableRegisterMove' for BtVer2 looks like this:
```
def : IsOptimizableRegisterMove<[
InstructionEquivalenceClass<[
// GPR variants.
MOV32rr, MOV64rr,
// MMX variants.
MMX_MOVQ64rr,
// SSE variants.
MOVAPSrr, MOVUPSrr,
MOVAPDrr, MOVUPDrr,
MOVDQArr, MOVDQUrr,
// AVX variants.
VMOVAPSrr, VMOVUPSrr,
VMOVAPDrr, VMOVUPDrr,
VMOVDQArr, VMOVDQUrr
], CheckNot<CheckSameRegOperand<0, 1>> >
]>;
```
Definitions of IsOptimizableRegisterMove from processor models of a same
Target are processed by the SubtargetEmitter to auto-generate a target-specific
override for each of the following predicate methods:
```
bool TargetSubtargetInfo::isOptimizableRegisterMove(const MachineInstr *MI)
const;
bool MCInstrAnalysis::isOptimizableRegisterMove(const MCInst &MI, unsigned
CPUID) const;
```
By default, those methods return false (i.e. conservatively assume that there
are no move elimination candidates).
Tablegen class RegisterFile has been extended with the following information:
- The set of register classes that allow move elimination.
- Maxium number of moves that can be eliminated every cycle.
- Whether move elimination is restricted to moves from registers that are
known to be zero.
This patch is structured in three part:
A first part (which is mostly boilerplate) adds the new
'isOptimizableRegisterMove' target hooks, and extends existing register file
descriptors in MC by introducing new fields to describe properties related to
move elimination.
A second part, uses the new tablegen constructs to describe move elimination in
the BtVer2 scheduling model.
A third part, teaches llm-mca how to query the new 'isOptimizableRegisterMove'
hook to mark instructions that are candidates for move elimination. It also
teaches class RegisterFile how to describe constraints on move elimination at
PRF granularity.
llvm-mca tests for btver2 show differences before/after this patch.
Differential Revision: https://reviews.llvm.org/D53134
llvm-svn: 344334
These should test all the optimizable moves on Jaguar.
A follow-up patch will teach how to recognize these optimizable register moves.
llvm-svn: 344144
Currently we hardcode instructions with ReadAfterLd if the register operands don't need to be available until the folded load has completed. This doesn't take into account the different load latencies of different memory operands (PR36957).
This patch adds a ReadAfterFold def into X86FoldableSchedWrite to replace ReadAfterLd, allowing us to specify the load latency at a scheduler class level.
I've added ReadAfterVec*Ld classes that match the XMM/Scl, XMM and YMM/ZMM WriteVecLoad classes that we currently use, we can tweak these values in future patches once this infrastructure is in place.
Differential Revision: https://reviews.llvm.org/D52886
llvm-svn: 343868
This patch teaches class RegisterFile how to analyze register writes from
instructions that are move elimination candidates.
In particular, it teaches it how to check if a move can be effectively eliminated
by the underlying PRF, and (if necessary) how to perform move elimination.
The long term goal is to allow processor models to describe instructions that
are valid move elimination candidates.
The idea is to let register file definitions in tablegen declare if/when moves
can be eliminated.
This patch is a non functional change.
The logic that performs move elimination is currently disabled. A future patch
will add support for move elimination in the processor models, and enable this
new code path.
llvm-svn: 343691
I was expecting this to be a nfc but Silvermont seems to be setup a little differently:
// A folded store needs a cycle on MEC_RSV for the store data, but it does not need an extra port cycle to recompute the address.
def : WriteRes<WriteRMW, [SLM_MEC_RSV]>;
So moving from WriteStore to WriteRMW reduces predicted port pressure, confirmed by @craig.topper that this is correct.
Differential Revision: https://reviews.llvm.org/D52740
llvm-svn: 343670
This patch adds another variant class to identify zero-idiom VPERM2F128rr
instructions.
On Jaguar, a VPERM wih bit 3 and 7 of the mask set, is a zero-idiom.
Differential Revision: https://reviews.llvm.org/D52663
llvm-svn: 343452
Summary:
While looking at PR35606, I found out that the scheduling info is incorrect.
One can check that it's really a P5+P6 and not a 2*P56 with:
echo -e 'vzeroall\nvandps %xmm1, %xmm2, %xmm3' | ./bin/llvm-exegesis -mode=uops -snippets-file=-
(vandps executes on P5 only)
Reviewers: craig.topper, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52541
llvm-svn: 343447
We don't correctly model the latency and resource usage information for
zero-idiom VPERM2F128rr on Jaguar.
This is demonstrated by the incorrect numbers in the resource pressure view, and
the timeline view.
A follow up patch will fix this problem.
llvm-svn: 343346
If any prefixes have been specified on the RUN lines that do not end up
ever actually getting printed, raise an Error. This is either an
indication that the run lines just need cleaning up, or that something
is more fundamentally wrong with the test.
Also raise an Error if there are any blocks which cannot be checked
because they are not uniquely covered by a prefix.
Fixed up a couple of tests where the extra checking flagged up issues.
Differential Revision: https://reviews.llvm.org/D48276
llvm-svn: 343332
Insert empty blocks to cause the positions of matching blocks to match
across lists where possible so that later stages of the algorithm can
actually identify them as being identical.
Regenerated all tests with this change.
Differential Revision: https://reviews.llvm.org/D52560
llvm-svn: 343331
Craig Topper