Summary:
I ran into some issues after rOMP355687, where __atomic_fetch_add was
being used incorrectly on x86, and this turns out to be caused by the
following added conditionals:
```
#if defined(KMP_ARCH_MIPS)
```
The problem is, these macros are always defined, and are either 0 or 1
depending on the architecture. E.g. the correct way to test for MIPS
is:
```
#if KMP_ARCH_MIPS
```
Reviewers: petarj, jlpeyton, Hahnfeld, AndreyChurbanov
Reviewed By: petarj, AndreyChurbanov
Subscribers: AndreyChurbanov, sdardis, arichardson, atanasyan, jfb, jdoerfert, openmp-commits, llvm-commits
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D60938
llvm-svn: 358911
Fix the test to run it really in SPMD mode without runtime. Previously
it was run in SPMD + full runtime mode and does not allow to cehck the
functionality correctly.
llvm-svn: 358902
Summary:
If the kernel is executed in SPMD mode and the L2+ parallel for region
with the dynamic scheduling is executed, dynamic scheduling functions
are called. They expect full runtime support, but SPMD kernels may be
executed without the full runtime. It leads to the runtime crash of the
compiled program. Patch fixes this problem + fixes handling of the
parallelism level in SPMD mode, which is required as part of this patch.
Reviewers: gtbercea, kkwli0, grokos
Subscribers: guansong, jdoerfert, openmp-commits, caomhin
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D60578
llvm-svn: 358442
This change replaces some of the assembly functions in z_Linux_asm.S
for inline asm in kmp.h. This allows better interaction with compiler
tools and sanitizers.
Differential Revision: https://reviews.llvm.org/D60423
llvm-svn: 358438
* Replace HBWMALLOC API with more general MEMKIND API, new functions
and variables added.
* Have libmemkind.so loaded when accessible.
* Redirect memspaces to default one except for high bandwidth which
is processed separately.
* Ignore some allocator traits e.g., sync_hint, access, pinned, while
others are processed normally e.g., alignment, pool_size, fallback,
fb_data, partition.
* Add tests for memory management
Patch by Andrey Churbanov
Differential Revision: https://reviews.llvm.org/D59783
llvm-svn: 357929
This patch cleans up the bookkeeping code for the load balancing dynamic mode.
When a thread is moved to or from the thread pool, the th_active_in_pool flag
and the __kmp_thread_pool_active_nth global counter are both updated. This
removes the need for the corrective code in the main wait loop. Another global
counter, __kmp_thread_pool_nth, was removed completely, as it was only used for
debugging, but was not under KMP_DEBUG.
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D59508
llvm-svn: 357927
Debug dump on large machine shows when many OpenMP threads (401 in total)
sleep on a barrier, one of the innermost nesting levels sleeps
on a child's b_arrived flag whose value is equal to 4 and is equal to
checker value. i.e., (1) sleep bit is 0, and (2) done_check() would
return true if called.
It is unclear how this might happen. It could be Windows Server 2016's
error of EnterCriticalSection / LeaveCriticalSection, or
error of WaitForSingleObject / SetEvent / ResetEvent, or
error in the library which is very difficult to find.
As a workaround, change INFINITE wait to timed wait, so that each
thread awakens each 5 seconds (the timeout was chosen arbitrary to not
disturb other threads much), check flag condition under the lock, and
either go to sleep again or stop sleeping as a result of the check.
Patch by Andrey Churbanov
Differential Revision: https://reviews.llvm.org/D59793
llvm-svn: 357722
The distribute clause needs an explicit push of a timer. The teams
clause needs a timer added and also, similarly to parallel, exchanged
with the serial timer when encountered so that serial regions are
counted properly.
Differential Revision: https://reviews.llvm.org/D59801
llvm-svn: 357621
On most platforms, certain compiler and linker flags have to be passed
when using pthreads, otherwise linking against libomp.so might fail with
undefined references to several pthread functions.
Use CMake's `find_package(Threads)` to determine these for standalone
builds, or take them (and optionally modify them) from the top-level
LLVM cmake files.
Also, On FreeBSD, ensure that libomp.so is linked against libm.so,
similar to NetBSD.
Adjust test cases with hardcoded `-lpthread` flag to use the common
build flags, which should now have the required pthread flags.
Reviewers: emaste, jlpeyton, krytarowski, mgorny, protze.joachim, Hahnfeld
Reviewed By: Hahnfeld
Subscribers: AndreyChurbanov, tra, EricWF, Hahnfeld, jfb, jdoerfert, openmp-commits
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D59451
llvm-svn: 357618
At the moment, support for runtime debug output using the
OMPTARGET_DEBUG=1 environment variable is only available with
CMAKE_BUILD_TYPE=Debug builds. The patch allows setting it independently
using the LIBOMPTARGET_ENABLE_DEBUG option, which is enabled by default
depending on CMAKE_BUILD_TYPE. That is, unless this option is set
explicitly, nothing changes. This is the same mechanism used by LLVM for
LLVM_ENABLE_ASSERTIONS.
This patch also removes adding -g -O0 in debug builds, it should be
handled by cmake's CMAKE_{C|CXX}_FLAGS_DEBUG configuration option.
Idea by Hal Finkel
Differential Revision: https://reviews.llvm.org/D55952
llvm-svn: 356998
Summary:
While building the 8.0 releases on FreeBSD, I encountered the following
error in the regression tests, where ompt/misc/interoperability.cpp
failed to compile, with:
```
projects/openmp/runtime/test/ompt/misc/interoperability.cpp:7:10: fatal error: 'alloca.h' file not found
#include <alloca.h>
^~~~~~~~~~
```
Like on NetBSD, alloca(3) is defined in <stdlib.h> instead.
Reviewers: emaste, jlpeyton, krytarowski, mgorny, protze.joachim
Reviewed By: jlpeyton
Subscribers: jdoerfert, openmp-commits
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D59736
llvm-svn: 356936
Summary:
[Split off from D59451 to get this fix in separately]
While building the 8.0 releases on FreeBSD, I encountered the following
warnings in openmp quite a few times:
```
In file included from projects/openmp/runtime/src/kmp_settings.cpp:27:
projects/openmp/runtime/src/kmp_wrapper_getpid.h:35:2: warning: #warning is a language extension [-Wpedantic]
#warning No gettid found, use getpid instead
^
projects/openmp/runtime/src/kmp_wrapper_getpid.h:35:2: warning: No gettid found, use getpid instead [-W#warnings]
2 warnings generated.
```
I added a gettid wrapper that uses FreeBSD's pthread_getthreadid_np(3)
function for this.
Reviewers: emaste, jlpeyton, krytarowski, mgorny, protze.joachim
Reviewed By: jlpeyton
Subscribers: jfb, jdoerfert, openmp-commits
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D59735
llvm-svn: 356934
The GOMP sections interface uses schedule(dynamic) dispatch so it cannot
be assumed which thread executes the cancel and which thread executes
the cancellation point. This patch allows either thread to execute either
section.
llvm-svn: 356302
The following GCC intrinsics are not available on MIPS32:
__sync_fetch_and_add_8
__sync_fetch_and_and_8
__sync_fetch_and_or_8
__sync_val_compare_and_swap_8
Replace these with appropriate libatomic implementation.
Patch by Miodrag Dinic.
Differential Revision: https://reviews.llvm.org/D45691
llvm-svn: 355687
Summary:
The current install-clang-headers target installs clang's resource
directory headers. This is different from the install-llvm-headers
target, which installs LLVM's API headers. We want to introduce the
corresponding target to clang, and the natural name for that new target
would be install-clang-headers. Rename the existing target to
install-clang-resource-headers to free up the install-clang-headers name
for the new target, following the discussion on cfe-dev [1].
I didn't find any bots on zorg referencing install-clang-headers. I'll
send out another PSA to cfe-dev to accompany this rename.
[1] http://lists.llvm.org/pipermail/cfe-dev/2019-February/061365.html
Reviewers: beanz, phosek, tstellar, rnk, dim, serge-sans-paille
Subscribers: mgorny, javed.absar, jdoerfert, #sanitizers, openmp-commits, lldb-commits, cfe-commits, llvm-commits
Tags: #clang, #sanitizers, #lldb, #openmp, #llvm
Differential Revision: https://reviews.llvm.org/D58791
llvm-svn: 355340
Changing the default from -fPIC to -fno-PIC on PowerPC exposed an issue in
OpenMP for PowerPC.
The issue is reported here:
https://bugs.llvm.org/show_bug.cgi?id=40082
This is a fix for that issue.
Also removed the XFAIL from the two tests that were failing under -fno-PIC.
Differential Revision: https://reviews.llvm.org/D56286
llvm-svn: 355229
This change makes the runtime decide the intended use of each barrier
invocation, for the OMPT synchronization tool callbacks. The OpenMP 5.0
specification defines four possible barrier kinds -- implicit, explicit,
implementation, and just normal barrier.
Patch by Hansang Bae
Differential Revision: https://reviews.llvm.org/D58247
llvm-svn: 355140
Nest-var, OMP_NESTED, omp_set_nested()., and omp_get_nested() have been
deprecated in the 5.0 spec. Initial nesting info is now derived from
OMP_MAX_ACTIVE_LEVELS, OMP_NUM_THREADS, and OMP_PROC_BIND.
This patch deprecates the internal ICV that corresponds to nest-var, and
replaces it with the max-active-levels-var ICV to determine nesting. The
change still allows for use of OMP_NESTED (according to 5.0 changes),
omp_get_nested, and omp_set_nested, which have had deprecation messages
added to them. The change allows certain settings of OMP_NUM_THREADS,
OMP_PROC_BIND, and OMP_MAX_ACTIVE_LEVELS to turn on nesting, but
OMP_NESTED=0 will still force nesting to be off.
The runtime now prints informative messages about deprecation of
OMP_NESTED, omp_set_nested(), and omp_get_nested(), when those
environment variables or routines are used. It also prints deprecated
message in output for KMP_SETTINGS and OMP_DISPLAY_ENV for OMP_NESTED.
This patch also fixes OMP_DISPLAY_ENV output for OMP_TARGET_OFFLOAD.
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D58408
llvm-svn: 355138
This patch cleans up the yielding code and makes it optional. An
environment variable, KMP_USE_YIELD, was added. Yielding is still
on by default (KMP_USE_YIELD=1), but can be turned off completely
(KMP_USE_YIELD=0), or turned on only when oversubscription is detected
(KMP_USE_YIELD=2). Note that oversubscription cannot always be detected
by the runtime (for example, when the runtime is initialized and the
process forks, oversubscription cannot be detected currently over
multiple instances of the runtime).
Because yielding can be controlled by user now, the library mode
settings (from KMP_LIBRARY) for throughput and turnaround have been
adjusted by altering blocktime, unless that was also explicitly set.
In the original code, there were a number of places where a double yield
might have been done under oversubscription. This version checks
oversubscription and if that's not going to yield, then it does
the spin check.
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D58148
llvm-svn: 355120
Summary:
This patch adds a more sophisticated team reduction scheme to the OpenMP libomptarget-nvptx runtime.
The scheme uses a fixed size global memory buffer whose length can be adjusted via compiler flag:
```
-fopenmp-cuda-teams-reduction-recs-num=1024
```
The global buffer is a structure of arrays (with default size of 1024 each and controlled by the above flag), one array for each reduction variable.
Values in the buffer are processed by the last team to finish executing the body of the target region.
In addition to adding support for the new flag, the compiler also emits special functions used for the reduction of the intermediate reduction values. These changes will be added in a separate compiler patch following this one.
Reviewers: ABataev, caomhin
Reviewed By: ABataev
Subscribers: guansong, jfb, jdoerfert, openmp-commits
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D58409
llvm-svn: 354471
This patch adds the new 5.0 API function omp_get_supported_active_levels().
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D58211
llvm-svn: 354368
Remove fatal error messages from the cancellation API for GOMP
Add __kmp_barrier_gomp_cancel() to implement cancellation of parallel regions.
This new function uses the linear barrier algorithm with a cancellable
nonsleepable wait loop.
Differential Revision: https://reviews.llvm.org/D57969
llvm-svn: 354367
The thread-limit-var and omp_get_thread_limit API was not perfectly handled for
teams construct. Now, when modified by thread_limit clause, omp_get_thread_limit
reports the correct value. In addition, the value is restored when leaving the
teams construct to what it was in the encountering context.
This is done partly by creating the notion of a Contention Group root (CG root)
that keeps track of the thread at the root of each separate CG, the
thread-limit-var associated with the CG, and associated counter of active
threads within the contention group.
thread-limits are passed from master to worker threads via an entry in the ICV
data structure. When a "contention group switch" occurs, a new CG root record is
made and passed from master to worker. A thread could potentially have several
CG root records if it encounters multiple nested teams constructs (but at the
moment the spec doesn't allow for nested teams, so the most one could have
currently is 2). The master of the teams masters gets the thread-limit clause
value stored to its local ICV structure, and the other teams masters copy it
from the master. The thread-limit is set from that ICV copy and restored to the
ICV copy when entering and leaving the teams construct.
This change also fixes a bug when the top-level teams construct team gets
reused, and OMP_DYNAMIC was true, which can cause the expected size of this team
to be smaller than what was actually allocated. The fix updates the size of the
team after its threads were reserved.
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D56804
llvm-svn: 353747
%s refers to the test file in the source tree. This was accidentally added in
r351197 / 2b46d30 ("[OMPT] Second chunk of final OMPT 5.0 interface updates").
Differential Revision: https://reviews.llvm.org/D58002
llvm-svn: 353715
Summary:
As @david2050 commented, changes introduced by https://reviews.llvm.org/D56397 break builds for older compilers
which don't support `__has(_cpp)_attribute`. This is a fix for the break.
Reviewers: protze.joachim, jlpeyton, AndreyChurbanov, Hahnfeld, david2050
Subscribers: openmp-commits, david2050
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D57851
llvm-svn: 353538
The three switch fallthrough generate a warning with -Wimplicit-fallthrough.
Two are documented as fallthrough, one is not, but I think the intention is to also fallthrough in kmp_tasking.cpp.
Not sure whether kmp.h is the best place to define the macro.
Reviewers: jlpeyton, AndreyChurbanov, Hahnfeld
Reviewed By: jlpeyton
Tags: #openmp
Differential Revision: https://reviews.llvm.org/D56397
llvm-svn: 353052
Redo after revert by hans. The wrong include in one test is fixed.
Make sure that OMPT is enabled in runtime entry points that access internals
of the runtime. Else, return an appropiate value indicating an error or that
the data is not available.
Patch provided by @sconvent
Reviewers: jlpeyton, omalyshe, hbae, Hahnfeld, joachim.protze
Reviewed By: joachim.protze
Tags: #openmp, #ompt
Differential Revision: https://reviews.llvm.org/D47717
llvm-svn: 352611
This fixes most references to the paths:
llvm.org/svn/
llvm.org/git/
llvm.org/viewvc/
github.com/llvm-mirror/
github.com/llvm-project/
reviews.llvm.org/diffusion/
to instead point to https://github.com/llvm/llvm-project.
This is *not* a trivial substitution, because additionally, all the
checkout instructions had to be migrated to instruct users on how to
use the monorepo layout, setting LLVM_ENABLE_PROJECTS instead of
checking out various projects into various subdirectories.
I've attempted to not change any scripts here, only documentation. The
scripts will have to be addressed separately.
Additionally, I've deleted one document which appeared to be outdated
and unneeded:
lldb/docs/building-with-debug-llvm.txt
Differential Revision: https://reviews.llvm.org/D57330
llvm-svn: 352514
As the codebase is now under the Apache 2.0 license with LLVM
Exceptions, and all Arm's contributions, past or future, are under that
new license, this Arm specific words in LICENSE.txt are no longer
needed.
llvm-svn: 352377
all missed!
Thanks to Alex Bradbury for pointing this out, and the fact that I never
added the intended `legacy` anchor to the developer policy. Add that
anchor too. With hope, this will cause the links to all resolve
successfully.
llvm-svn: 351731
to reflect the new license. These used slightly different spellings that
defeated my regular expressions.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351648
This installs the new developer policy and moves all of the license
files across all LLVM projects in the monorepo to the new license
structure. The remaining projects will be moved independently.
Note that I've left odd formatting and other idiosyncracies of the
legacy license structure text alone to make the diff easier to read.
Critically, note that we do not in any case *remove* the old license
notice or terms, as that remains necessary until we finish the
relicensing process.
I've updated a few license files that refer to the LLVM license to
instead simply refer generically to whatever license the LLVM project is
under, basically trying to minimize confusion.
This is really the culmination of so many people. Chris led the
community discussions, drafted the policy update and organized the
multi-year string of meeting between lawyers across the community to
figure out the strategy. Numerous lawyers at companies in the community
spent their time figuring out initial answers, and then the Foundation's
lawyer Heather Meeker has done *so* much to help refine and get us ready
here. I could keep going on, but I just want to make sure everyone
realizes what a huge community effort this has been from the begining.
Differential Revision: https://reviews.llvm.org/D56897
llvm-svn: 351631
and also the follow-up r351315.
The new test is failing on the buildbots.
> Make sure that OMPT is enabled in runtime entry points that access internals
> of the runtime. Else, return an appropiate value indicating an error or that
> the data is not available.
>
> Patch provided by @sconvent
>
> Reviewers: jlpeyton, omalyshe, hbae, Hahnfeld, joachim.protze
>
> Reviewed By: joachim.protze
>
> Tags: #openmp, #ompt
>
> Differential Revision: https://reviews.llvm.org/D47717
llvm-svn: 351431
Add omp_pause_resource and omp_pause_resource_all API and enum, plus stub for
internal implementation. Implemented callable helper function to do local pause,
and added basic functionality for hard and soft pause.
Patch by Terry Wilmarth
Differential Revision: https://reviews.llvm.org/D55078
llvm-svn: 351372
Dimitry Andric