X86 normally requires immediates to be a signed 32-bit value which would exclude i64 0x80000000. But for add/sub we can negate the constant and use the opposite instruction.
llvm-svn: 338204
We penalize general SDIV/UDIV costs but don't do the same for SREM/UREM.
This patch makes general vector SREM/UREM x20 as costly as scalar, the same approach as we do for SDIV/UDIV. The patch also extends the existing SDIV/UDIV constant costs for SREM/UREM - at the moment this means the additional cost of a MUL+SUB (see D48975).
Differential Revision: https://reviews.llvm.org/D48980
llvm-svn: 336486
These were being over cautious for costs for one/two op general shuffles - VSHUFPD doesn't have to replicate the same shuffle in both lanes like VSHUFPS does.
llvm-svn: 335216
As discussed on PR33744, this patch relaxes ShuffleKind::SK_Alternate which requires shuffle masks to only match an alternating pattern from its 2 sources:
e.g. v4f32: <0,5,2,7> or <4,1,6,3>
This seems far too restrictive as most SIMD hardware which will implement it using a general blend/bit-select instruction, so replaces it with SK_Select, permitting elements from either source as long as they are inline:
e.g. v4f32: <0,5,2,7>, <4,1,6,3>, <0,1,6,7>, <4,1,2,3> etc.
This initial patch just updates the name and cost model shuffle mask analysis, later patch reviews will update SLP to better utilise this - it still limits itself to SK_Alternate style patterns.
Differential Revision: https://reviews.llvm.org/D47985
llvm-svn: 334513
This enables us to detect more fast path sdiv cases under cost analysis.
This patch also enables us to handle non-uniform-constant pow2 cases for X86 SDIV costs.
Found while working on D46276
Future patches can then extend the vectorizers to more fully support non-uniform pow2 cases.
Differential Revision: https://reviews.llvm.org/D46637
llvm-svn: 332969
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Algorithmically compute the 'x20' SDIV/UDIV vector costs - this is necessary for PR36550 when DIV costs will be driven from the scheduler models.
llvm-svn: 330870
Add fdiv costs for Goldmont using table 16-17 of the Intel Optimization Manual. Also add overrides for FSQRT for Goldmont and Silvermont.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44644
llvm-svn: 328451
Agner's tables indicate that for SSE42+ targets (Core2 and later) we can reduce the FADD/FSUB/FMUL costs down to 1, which should fix the Himeno benchmark.
Note: the AVX512 FDIV costs look rather dodgy, but this isn't part of this patch.
Differential Revision: https://reviews.llvm.org/D43733
llvm-svn: 326133
In the motivating case from PR35681 and represented by the macro-fuse-cmp test:
https://bugs.llvm.org/show_bug.cgi?id=35681
...there's a 37 -> 31 byte size win for the loop because we eliminate the big base
address offsets.
SPEC2017 on Ryzen shows no significant perf difference.
Differential Revision: https://reviews.llvm.org/D42607
llvm-svn: 324289
This will cause the vectorizers to do some limiting of the vector widths they create. This is not a strict limit. There are reasons I know of that the loop vectorizer will generate larger vectors for.
I've written this in such a way that the interface will only return a properly supported width(0/128/256/512) even if the attribute says something funny like 384 or 10.
This has been split from D41895 with the remainder in a follow up commit.
llvm-svn: 323015
Summary:
If the vector type is transformed to non-vector single type, the compile
may crash trying to get vector information about non-vector type.
Reviewers: RKSimon, spatel, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41862
llvm-svn: 322106
Previously the lambda for AVX512 passed out a flag that indicated whether AVX512BW was required and that was checked against the AVX512BW subtarget flag outside.
This patch changes the interface to pass the AVX512BW subtarget bit in and return its value if we detect 16 or 8 bit types.
llvm-svn: 319919
Summary:
This adds a new fast gather feature bit to cover all CPUs that support fast gather that we can use independent of whether the AVX512 feature is enabled. I'm only using this new bit to qualify AVX2 codegen. AVX512 is still implicitly assuming fast gather to keep tests working and to match the scatter behavior.
Test command lines have been added for these two cases.
Reviewers: magabari, delena, RKSimon, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40282
llvm-svn: 318983
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
This patch contains more accurate cost of interelaved load\store of stride 2 for the types int64\double on AVX2.
Reviewers: delena, RKSimon, craig.topper, dorit
Reviewed By: dorit
Differential Revision: https://reviews.llvm.org/D40008
llvm-svn: 318385
The type legalizer will try to scalarize these operations if it sees them, but there is no handling for scalarizing them. This leads to a fatal error. With this change they will now be scalarized by the mem intrinsic scalarizing pass before SelectionDAG.
llvm-svn: 318380
Summary:
The cost calculation for default case on X86 target does not always
follow correct wayt because of missing 4-th argument in
`BaseT::getCastInstrCost()` call. Added this missing parameter.
Reviewers: hfinkel, mkuper, RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39687
llvm-svn: 317576
Recommit:
This patch contains update of the costs of interleaved loads of v8f32 of stride 3 and 8.
fixed the location of the lit test it works with make check-all.
Differential Revision: https://reviews.llvm.org/D39403
llvm-svn: 317471
reverted my changes will be committed later after fixing the failure
This patch contains update of the costs of interleaved loads of v8f32 of stride 3 and 8.
Differential Revision: https://reviews.llvm.org/D39403
llvm-svn: 317433
This patch contains update of the costs of interleaved loads of v8f32 of stride 3 and 8.
Differential Revision: https://reviews.llvm.org/D39403
llvm-svn: 317432
- Targets that want to support memcmp expansions now return the list of
supported load sizes.
- Expansion codegen does not assume that all power-of-two load sizes
smaller than the max load size are valid. For examples, this is not the
case for x86(32bit)+sse2.
Fixes PR34887.
llvm-svn: 316905
This patch adds accurate instructions cost.
The formula presents two cases(stride 3 and stride 4) and calculates the cost according to the VF and stride.
Reviewers:
1. delena
2. Farhana
3. zvi
4. dorit
5. Ayal
Differential Revision: https://reviews.llvm.org/D38762
Change-Id: If4cfbd4ac0e63694e8144cb78c7fa34850647ff7
llvm-svn: 316072
Summary:
Right now there are two functions with the same name, one does the work
and the other one returns true if expansion is needed. Rename
TargetTransformInfo::expandMemCmp to make it more consistent with other
members of TargetTransformInfo.
Remove the unused Instruction* parameter.
Differential Revision: https://reviews.llvm.org/D38165
llvm-svn: 314096
This is intended to be a superset of the functionality from D31037 (EarlyCSE) but implemented
as an independent pass, so there's no stretching of scope and feature creep for an existing pass.
I also proposed a weaker version of this for SimplifyCFG in D30910. And I initially had almost
this same functionality as an addition to CGP in the motivating example of PR31028:
https://bugs.llvm.org/show_bug.cgi?id=31028
The advantage of positioning this ahead of SimplifyCFG in the pass pipeline is that it can allow
more flattening. But it needs to be after passes (InstCombine) that could sink a div/rem and
undo the hoisting that is done here.
Decomposing remainder may allow removing some code from the backend (PPC and possibly others).
Differential Revision: https://reviews.llvm.org/D37121
llvm-svn: 312862
SLP vectorizer supports horizontal reductions for Add/FAdd binary
operations. Patch adds support for horizontal min/max reductions.
Function getReductionCost() is split to getArithmeticReductionCost() for
binary operation reductions and getMinMaxReductionCost() for min/max
reductions.
Patch fixes PR26956.
Differential revision: https://reviews.llvm.org/D27846
llvm-svn: 312791
Summary:
Add patterns for
fptoui <16 x float> to <16 x i8>
fptoui <16 x float> to <16 x i16>
Reviewers: igorb, delena, craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37505
llvm-svn: 312704
Summary:
We add the precise cache sizes and associativity for the following Intel
architectures:
- Penry
- Nehalem
- Westmere
- Sandy Bridge
- Ivy Bridge
- Haswell
- Broadwell
- Skylake
- Kabylake
Polly uses since several months a performance model for BLAS computations that
derives optimal cache and register tile sizes from cache and latency
information (based on ideas from "Analytical Modeling Is Enough for High-Performance BLIS", by Tze Meng Low published at TOMS 2016).
While bootstrapping this model, these target values have been kept in Polly.
However, as our implementation is now rather mature, it seems time to teach
LLVM itself about cache sizes.
Interestingly, L1 and L2 cache sizes are pretty constant across
micro-architectures, hence a set of architecture specific default values
seems like a good start. They can be expanded to more target specific values,
in case certain newer architectures require different values. For now a set
of Intel architectures are provided.
Just as a little teaser, for a simple gemm kernel this model allows us to
improve performance from 1.2s to 0.27s. For gemm kernels with less optimal
memory layouts even larger speedups can be reported.
Reviewers: Meinersbur, bollu, singam-sanjay, hfinkel, gareevroman, fhahn, sebpop, efriedma, asb
Reviewed By: fhahn, asb
Subscribers: lsaba, asb, pollydev, llvm-commits
Differential Revision: https://reviews.llvm.org/D37051
llvm-svn: 311647
Store operation takes 2 UOps on X86 processors. The exact cost calculation affects several optimization passes including loop unroling.
This change compensates performance degradation caused by https://reviews.llvm.org/D34458 and shows improvements on some benchmarks.
Differential Revision: https://reviews.llvm.org/D35888
llvm-svn: 311285
Add missing SK_PermuteSingleSrc costs for AVX2 targets and earlier, also added some of the simpler SK_PermuteTwoSrc costs to support splitting of SK_PermuteSingleSrc shuffles
llvm-svn: 310632
The root cause of reverting was fixed - PR33514.
Summary:
The patch makes instruction count the highest priority for
LSR solution for X86 (previously registers had highest priority).
Reviewers: qcolombet
Differential Revision: http://reviews.llvm.org/D30562
From: Evgeny Stupachenko <evstupac@gmail.com>
<evgeny.v.stupachenko@intel.com>
llvm-svn: 310289
this patch updates the cost of addq\subq (add\subtract of vectors of 64bits)
based on the performance numbers of SLM arch.
Differential Revision: https://reviews.llvm.org/D33983
llvm-svn: 306974
The cost of an interleaved access was only implemented for AVX512. For other
X86 targets an overly conservative Base cost was returned, resulting in
avoiding vectorization where it is actually profitable to vectorize.
This patch starts to add costs for AVX2 for most prominent cases of
interleaved accesses (stride 3,4 chars, for now).
Note1: Improvements of up to ~4x were observed in some of EEMBC's rgb
workloads; There is also a known issue of 15-30% degradations on some of these
workloads, associated with an interleaved access followed by type
promotion/widening; the resulting shuffle sequence is currently inefficient and
will be improved by a series of patches that extend the X86InterleavedAccess pass
(such as D34601 and more to follow).
Note 2: The costs in this patch do not reflect port pressure penalties which can
be very dominant in the case of interleaved accesses since most of the shuffle
operations are restricted to a single port. Further tuning, that may incorporate
these considerations, will be done on top of the upcoming improved shuffle
sequences (that is, along with the abovementioned work to extend
X86InterleavedAccess pass).
Differential Revision: https://reviews.llvm.org/D34023
llvm-svn: 306238
Craig Topper