A ConstantVector can have ConstantExpr operands and vice versa.
However, the folder had no ability to fold ConstantVectors which, in
some cases, was an optimization barrier.
Instead, rephrase the folder in terms of Constants instead of
ConstantExprs and teach callers how to deal with failure.
llvm-svn: 277099
Summary:
Asan stack-use-after-scope check should poison alloca even if there is
no access between start and end.
This is possible for code like this:
for (int i = 0; i < 3; i++) {
int x;
p = &x;
}
"Loop Invariant Code Motion" will move "p = &x;" out of the loop, making
start/end range empty.
PR27453
Reviewers: eugenis
Differential Revision: https://reviews.llvm.org/D22842
llvm-svn: 277072
Summary:
Asan stack-use-after-scope check should poison alloca even if there is
no access between start and end.
This is possible for code like this:
for (int i = 0; i < 3; i++) {
int x;
p = &x;
}
"Loop Invariant Code Motion" will move "p = &x;" out of the loop, making
start/end range empty.
PR27453
Reviewers: eugenis
Differential Revision: https://reviews.llvm.org/D22842
llvm-svn: 277068
Just because we can constant fold the result of an instruction does not
imply that we can delete the instruction. It may have side effects.
This fixes PR28655.
llvm-svn: 276389
Making smaller pieces out of some of these ~1000 line functions should make
it easier to incrementally upgrade them to handle vector types.
llvm-svn: 276304
As noted in https://reviews.llvm.org/D22537 , we can use this functionality in
visitSelectInstWithICmp() and InstSimplify, but currently we have duplicated
code.
llvm-svn: 276140
The pattern may look more obviously like a sext if written as:
define i32 @g(i16 %x) {
%zext = zext i16 %x to i32
%xor = xor i32 %zext, 32768
%add = add i32 %xor, -32768
ret i32 %add
}
We already have that fold in visitAdd().
Differential Revision: https://reviews.llvm.org/D22477
llvm-svn: 276035
Summary:
Currently, InstCombine is already able to fold expressions of the form `logic(cast(A), cast(B))` to the simpler form `cast(logic(A, B))`, where logic designates one of `and`/`or`/`xor`. This transformation is implemented in `foldCastedBitwiseLogic()` in InstCombineAndOrXor.cpp. However, this optimization will not be performed if both `A` and `B` are `icmp` instructions. The decision to preclude casts of `icmp` instructions originates in r48715 in combination with r261707, and can be best understood by the title of the former one:
> Transform (zext (or (icmp), (icmp))) to (or (zext (cimp), (zext icmp))) if at least one of the (zext icmp) can be transformed to eliminate an icmp.
Apparently, it introduced a transformation that is a reverse of the transformation that is done in `foldCastedBitwiseLogic()`. Its purpose is to expose pairs of `zext icmp` that would subsequently be optimized by `transformZExtICmp()` in InstCombineCasts.cpp. Therefore, in order to avoid an endless loop of switching back and forth between these two transformations, the one in `foldCastedBitwiseLogic()` has been restricted to exclude `icmp` instructions which is mirrored in the responsible check:
`if ((!isa<ICmpInst>(Cast0Src) || !isa<ICmpInst>(Cast1Src)) && ...`
This check seems to sort out more cases than necessary because:
- the reverse transformation is obviously done for `or` instructions only
- and also not every `zext icmp` pair is necessarily the result of this reverse transformation
Therefore we now remove this check and replace it by a more finegrained one in `shouldOptimizeCast()` that now rejects only those `logic(zext(icmp), zext(icmp))` that would be able to be optimized by `transformZExtICmp()`, which also avoids the mentioned endless loop. That means we are now able to also simplify expressions of the form `logic(cast(icmp), cast(icmp))` to `cast(logic(icmp, icmp))` (`cast` being an arbitrary `CastInst`).
As an example, consider the following IR snippet
```
%1 = icmp sgt i64 %a, %b
%2 = zext i1 %1 to i8
%3 = icmp slt i64 %a, %c
%4 = zext i1 %3 to i8
%5 = and i8 %2, %4
```
which would now be transformed to
```
%1 = icmp sgt i64 %a, %b
%2 = icmp slt i64 %a, %c
%3 = and i1 %1, %2
%4 = zext i1 %3 to i8
```
This issue became apparent when experimenting with the programming language Julia, which makes use of LLVM. Currently, Julia lowers its `Bool` datatype to LLVM's `i8` (also see https://github.com/JuliaLang/julia/pull/17225). In fact, the above IR example is the lowered form of the Julia snippet `(a > b) & (a < c)`. Like shown above, this may introduce `zext` operations, casting between `i1` and `i8`, which could for example hinder ScalarEvolution and Polly on certain code.
Reviewers: grosser, vtjnash, majnemer
Subscribers: majnemer, llvm-commits
Differential Revision: https://reviews.llvm.org/D22511
Contributed-by: Matthias Reisinger
llvm-svn: 275989
Summary:
This patch cleans up parts of InstCombine to raise its compliance with the LLVM coding standards and to increase its readability. The changes and according rationale are summarized in the following:
- Rename `ShouldOptimizeCast()` to `shouldOptimizeCast()` since functions should start with a lower case letter.
- Move `shouldOptimizeCast()` from InstCombineCasts.cpp to InstCombineAndOrXor.cpp since it's only used there.
- Simplify interface of `shouldOptimizeCast()`.
- Minor code style adaptions in `shouldOptimizeCast()`.
- Remove the documentation on the function definition of `shouldOptimizeCast()` since it just repeats the documentation on its declaration. Also enhance the documentation on its declaration with more information describing its intended use and make it doxygen-compliant.
- Change a comment in `foldCastedBitwiseLogic()` from `fold (logic (cast A), (cast B)) -> (cast (logic A, B))` to `fold logic(cast(A), cast(B)) -> cast(logic(A, B))` since the surrounding comments use this format.
- Remove comment `Only do this if the casts both really cause code to be generated.` in `foldCastedBitwiseLogic()` since it just repeats parts of the documentation of `shouldOptimizeCast()` and does not help to improve readability.
- Simplify the interface of `isEliminableCastPair()`.
- Removed the documentation on the function definition of `isEliminableCastPair()` which only contained obvious statements about its implementation. Instead added more general doxygen-compliant documentation to its declaration.
- Renamed parameter `DoXform` of `transformZExtIcmp()` to `DoTransform` to make its intention clearer.
- Moved documentation of `transformZExtIcmp()` from its definition to its declaration and made it doxygen-compliant.
Reviewers: vtjnash, grosser
Subscribers: majnemer, llvm-commits
Differential Revision: https://reviews.llvm.org/D22449
Contributed-by: Matthias Reisinger
llvm-svn: 275964
This is a partial implementation of a general fold for associative+commutative operators:
(op (cast (op X, C2)), C1) --> (cast (op X, op (C1, C2)))
(op (cast (op X, C2)), C1) --> (op (cast X), op (C1, C2))
There are 7 associative operators and 13 cast types, so this could potentially go a lot further.
Differential Revision: https://reviews.llvm.org/D22421
llvm-svn: 275684
We were able to fold masked loads with an all-ones mask to a normal
load. However, we couldn't turn a masked load with a mask with mixed
ones and undefs into a normal load.
llvm-svn: 275380
In D21740, we discussed trying to make this a more general matcher. However, I didn't see a clean
way to handle the regular m_Not cases and these non-splat vector patterns, so I've opted for the
direct approach here. If there are other potential uses of areInverseVectorBitmasks(), we could
move that helper function to a higher level.
There is an open question as to which is of these forms should be considered the canonical IR:
%sel = select <4 x i1> <i1 true, i1 false, i1 false, i1 true>, <4 x i32> %a, <4 x i32> %b
%shuf = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 0, i32 5, i32 6, i32 3>
Differential Revision: http://reviews.llvm.org/D22114
llvm-svn: 275289
This isn't a sure thing (are 2 extra bitcasts less expensive than a logic op?),
but we'll try to err on the conservative side by going with the case that has
less IR instructions.
Note: This question came up in http://reviews.llvm.org/D22114 , but this part is
independent of that patch proposal, so I'm making this small change ahead of that
one.
See also:
http://reviews.llvm.org/rL274926
llvm-svn: 274932
We can fold truncs whose operand feeds from a load, if the trunc value
is available through a prior load/store.
This change is from: http://reviews.llvm.org/D21246, which folded the
trunc but missed the bitcast or ptrtoint/inttoptr required in the RAUW
call, when the load type didnt match the prior load/store type.
Differential Revision: http://reviews.llvm.org/D21791
llvm-svn: 274853
By replacing dyn_cast of ConstantInt with m_Zero/m_One/m_AllOnes, we
allow these transforms for splat vectors.
Differential Revision: http://reviews.llvm.org/D21899
llvm-svn: 274696
Follow-up from r274465: we don't need to capture the value in these cases,
so just match the constant that we're looking for. m_One/m_Zero work with
vector splats as well as scalars.
llvm-svn: 274670
This actually uncovered a surprisingly large chain of ultimately unused
TLI args.
From what I can gather, this argument is a remnant of when
isKnownNonNull would look at the TLI directly.
The current approach seems to be that InferFunctionAttrs runs early in
the pipeline and uses TLI to annotate the TLI-dependent non-null
information as return attributes.
This also removes the dependence of functionattrs on TLI altogether.
llvm-svn: 274455
Revert "[InstCombine] Combine A->B->A BitCast"
as this appears to cause PR27996 and as discussed in http://reviews.llvm.org/D20847
This reverts commits r270135 and r263734.
llvm-svn: 274094
David Majnemer