Introduce an Address type to bundle a pointer value with an
alignment. Introduce APIs on CGBuilderTy to work with Address
values. Change core APIs on CGF/CGM to traffic in Address where
appropriate. Require alignments to be non-zero. Update a ton
of code to compute and propagate alignment information.
As part of this, I've promoted CGBuiltin's EmitPointerWithAlignment
helper function to CGF and made use of it in a number of places in
the expression emitter.
The end result is that we should now be significantly more correct
when performing operations on objects that are locally known to
be under-aligned. Since alignment is not reliably tracked in the
type system, there are inherent limits to this, but at least we
are no longer confused by standard operations like derived-to-base
conversions and array-to-pointer decay. I've also fixed a large
number of bugs where we were applying the complete-object alignment
to a pointer instead of the non-virtual alignment, although most of
these were hidden by the very conservative approach we took with
member alignment.
Also, because IRGen now reliably asserts on zero alignments, we
should no longer be subject to an absurd but frustrating recurring
bug where an incomplete type would report a zero alignment and then
we'd naively do a alignmentAtOffset on it and emit code using an
alignment equal to the largest power-of-two factor of the offset.
We should also now be emitting much more aggressive alignment
attributes in the presence of over-alignment. In particular,
field access now uses alignmentAtOffset instead of min.
Several times in this patch, I had to change the existing
code-generation pattern in order to more effectively use
the Address APIs. For the most part, this seems to be a strict
improvement, like doing pointer arithmetic with GEPs instead of
ptrtoint. That said, I've tried very hard to not change semantics,
but it is likely that I've failed in a few places, for which I
apologize.
ABIArgInfo now always carries the assumed alignment of indirect and
indirect byval arguments. In order to cut down on what was already
a dauntingly large patch, I changed the code to never set align
attributes in the IR on non-byval indirect arguments. That is,
we still generate code which assumes that indirect arguments have
the given alignment, but we don't express this information to the
backend except where it's semantically required (i.e. on byvals).
This is likely a minor regression for those targets that did provide
this information, but it'll be trivial to add it back in a later
patch.
I partially punted on applying this work to CGBuiltin. Please
do not add more uses of the CreateDefaultAligned{Load,Store}
APIs; they will be going away eventually.
llvm-svn: 246985
When ‘#pragma clang loop vectorize(assume_safety)’ was specified on a loop other loop hints were lost. The problem is that CGLoopInfo attaches metadata differently than EmitCondBrHints in CGStmt. For do-loops CGLoopInfo attaches metadata to the br in the body block and for while and for loops, the inc block. EmitCondBrHints on the other hand always attaches data to the br in the cond block. When specifying assume_safety CGLoopInfo emits an empty llvm.loop metadata shadowing the metadata in the cond block. Loop transformations like rotate and unswitch would then eliminate the cond block and its non-empty metadata.
This patch unifies both approaches for adding metadata and modifies the existing safety tests to include non-assume_safety loop hints.
llvm-svn: 243315
Some const-correctness changes snuck in here too, since they were in the
area of code I was modifying.
This seems to make Clang actually work without Bus Error on
32bit-sparc.
Follow-up patches will factor out a trailing-object helper class, to
make classes using the idiom of appending objects to other objects
easier to understand, and to ensure (with static_assert) that required
alignment guarantees continue to hold.
Differential Revision: http://reviews.llvm.org/D10272
llvm-svn: 242554
Previously, clang/llvm treated inline-asm instructions conservatively,
choosing not to eliminate the instructions or hoisting them out of a loop
even when it was safe to do so. This commit makes changes to attach a
readonly or readnone attribute to an inline-asm instruction, which enables
passes such as LICM and EarlyCSE to move or optimize away the instruction.
rdar://problem/11358192
Differential Revision: http://reviews.llvm.org/D10546
llvm-svn: 241930
Added parsing, sema analysis and codegen for '#pragma omp taskgroup' directive (OpenMP 4.0).
The code for directive is generated the following way:
#pragma omp taskgroup
<body>
void __kmpc_taskgroup(<loc>, thread_id);
<body>
void __kmpc_end_taskgroup(<loc>, thread_id);
llvm-svn: 240011
Instead, just EvaluateAsInt().
Follow-up to r239549: rsmith points out that isICE() is expensive;
seems like it's not the right concept anyway, as it fails on
`static const' in C, and will actually trigger the assert below on:
test/Sema/inline-asm-validate-x86.c
llvm-svn: 239651
Specifying #pragma clang loop vectorize(assume_safety) on a loop adds the
mem.parallel_loop_access metadata to each load/store operation in the loop. This
metadata tells loop access analysis (LAA) to skip memory dependency checking.
llvm-svn: 239572
For inline assembly immediate constraints, we currently always use
EmitScalarExpr, instead of directly emitting the constant. When the
overflow sanitizer is enabled, this generates overflow intrinsics
instead of constants.
Instead, emit a constant for constraints that either require an
immediate (e.g. 'I' on X86), or only accepts constants (immediate
or symbolic; i.e., don't accept registers or memory).
Fixes PR19763.
Differential Revision: http://reviews.llvm.org/D10255
llvm-svn: 239549
The fact that PGO has a say in how these branch weights are determined
isn't interesting to most of CodeGen, so it makes more sense for this
API to be accessible via CodeGenFunction rather than CodeGenPGO.
llvm-svn: 236380
The RegionCounter type does a lot of legwork, but most of it is only
meaningful within the implementation of CodeGenPGO. The uses elsewhere
in CodeGen generally just want to increment or read counters, so do
that directly.
llvm-svn: 235664
Even though these symbols are in a comdat group, the Microsoft linker
really wants them to have internal linkage.
I'm planning to tweak the mangling in a follow-up change. This is a
straight revert with a 1-line fix.
llvm-svn: 234613
WinEHPrepare was going to have to pattern match the control flow merge
and split that the old lowering used, and that wasn't really feasible.
Now we can teach WinEHPrepare to pattern match this, which is much
simpler:
%fp = call i8* @llvm.frameaddress(i32 0)
call void @func(iN [01], i8* %fp)
This prototype happens to match the prototype used by the Win64 SEH
personality function, so this is really simple.
llvm-svn: 234532
Patch adds proper generation of debug info for all OpenMP regions. Also, all OpenMP regions are generated in a termination scope, because standard does not allow to throw exceptions out of structured blocks, associated with the OpenMP regions
Differential Revision: http://reviews.llvm.org/D7935
llvm-svn: 231757
This reverts commit r231752.
It was failing to link with cmake:
lib64/libclangCodeGen.a(CGOpenMPRuntime.cpp.o):/home/espindola/llvm/llvm/tools/clang/lib/CodeGen/CGOpenMPRuntime.cpp:function clang::CodeGen::InlinedOpenMPRegionRAII::~InlinedOpenMPRegionRAII(): error: undefined reference to 'clang::CodeGen::EHScopeStack::popTerminate()'
clang-3.7: error: linker command failed with exit code 1 (use -v to see invocation)
llvm-svn: 231754
Patch adds proper generation of debug info for all OpenMP regions. Also, all OpenMP regions are generated in a termination scope, because standard does not allow to throw exceptions out of structured blocks, associated with the OpenMP regions
Differential Revision: http://reviews.llvm.org/D7935
llvm-svn: 231752
modifiers on them. If we have a matching output constraint with
an early clobber make sure we don't propagate that to the input
constraint.
llvm-svn: 228422
Summary:
Named registers with the constraint "=&r" currently lose the early clobber flag
and turn into "=r" when converted to LLVM-IR. This patch correctly passes it on.
Reviewers: atanasyan
Reviewed By: atanasyan
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D7346
llvm-svn: 228143
distinction between the different use-cases. With the previous default
behavior we would occasionally emit empty debug locations in situations
where they actually were strictly required (= on invoke insns).
We now have a choice between defaulting to an empty location or an
artificial location.
Specifically, this fixes a bug caused by a missing debug location when
emitting C++ EH cleanup blocks from within an artificial function, such as
an ObjC destroy helper function.
rdar://problem/19670595
llvm-svn: 228003
Several pieces of code were relying on implicit debug location setting
which usually lead to incorrect line information anyway. So I've fixed
those (in r225955 and r225845) separately which should pave the way for
this commit to be cleanly reapplied.
The reason these implicit dependencies resulted in crashes with this
patch is that the debug location would no longer implicitly leak from
one place to another, but be set back to invalid. Once a call with
no/invalid location was emitted, if that call was ever inlined it could
produce invalid debugloc chains and assert during LLVM's codegen.
There may be further cases of such bugs in this patch - they're hard to
flush out with regression testing, so I'll keep an eye out for reports
and investigate/fix them ASAP if they come up.
Original commit message:
Reapply "DebugInfo: Generalize debug info location handling"
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 225956
This reverts commit r225000, r225021, r225083, r225086, r225090.
The root change (r225000) still has several issues where it's caused
calls to be emitted without debug locations. This causes assertion
failures if/when those calls are inlined.
I'll work up some test cases and fixes before recommitting this.
llvm-svn: 225555
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 225000
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 224941
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 224385
The logic for lowering profiling counters has been moved to an LLVM
pass. Emit the intrinsics rather than duplicating the whole pass in
clang.
llvm-svn: 223683
An updated implemnentation of VLA types capturing based on previously committed solution for Lambdas.
This version captures the whole VLA type instead of particular variables which are part of VLA size expression and allows to use previusly calculated size of VLA type in captured regions. Required for OpenMP.
Differential Revision: http://reviews.llvm.org/D5099
llvm-svn: 220850
Previously loop hints such as #pragma loop vectorize_width(#) required a constant. This patch allows a constant expression to be used as well. Such as a non-type template parameter or an expression (2 * c + 1).
Reviewed by Richard Smith
llvm-svn: 219589
Includes parsing and semantic analysis for 'omp teams' directive support from OpenMP 4.0. Adds additional analysis to 'omp target' directive with 'omp teams' directive.
llvm-svn: 219385
Includes parsing and semantic analysis for 'omp teams' directive support from OpenMP 4.0. Adds additional analysis to 'omp target' directive with 'omp teams' directive.
llvm-svn: 219197
If control falls off the end of a function after an __asm block, MSVC
assumes that the inline assembly filled the EAX and possibly EDX
registers with an appropriate return value. This functionality is used
in inline functions returning 64-bit integers in system headers, so we
need some amount of compatibility.
This is implemented in Clang by adding extra output constraints to every
inline asm block, and storing the resulting output registers into the
return value slot. If we see an asm block somewhere in the function
body, we emit a normal epilogue instead of marking the end of the
function with a return type unreachable.
Normal returns in functions not using this functionality will overwrite
the return value slot, and in most cases LLVM should be able to
eliminate the dead stores.
Fixes PR17201.
Reviewed By: majnemer
Differential Revision: http://reviews.llvm.org/D5177
llvm-svn: 217187
Similar to r215768 (which fixed the same case for while loops). To quote
r215768's commit message:
"A little test case simplification - this could be simplified further,
though there are certainly interesting connections to the if/else
construct so I'm hesitant to remove that entirely though it does appear
somewhat unrelated.
(similar fix to r215766, related to PR19864)"
llvm-svn: 216297
for loops introduce two scopes - one for the outer loop variable and its
initialization, and another for the body of the loop, including any
variable declared inside the loop condition.
llvm-svn: 216288
A little test case simplification - this could be simplified further,
though there are certainly interesting connections to the if/else
construct so I'm hesitant to remove that entirely though it does appear
somewhat unrelated.
(similar fix to r215766, related to PR19864)
llvm-svn: 215768
This avoids debuggers stepping to strange places (like the last
statement in the loop body, or the first statement in the if).
This is not the whole answer, though - similar bugs no doubt exist in
other loops (patches to follow) and attributing exception handling code
to the correct line is also tricky (based on the previous fix to
PR19864, exception handling is still erroneously attributed to the 'if'
line).
llvm-svn: 215766
This patch is necessary to support constant expressions which replaces the integer value in the loop hint attribute with an expression. The integer value was also storing the pragma’s state for options like vectorize(enable/disable) and the pragma unroll and nounroll directive. The state variable is introduced to hold the state of those options/pragmas. This moves the validation of the state (keywords) from SemaStmtAttr handler to the loop hint annotation token handler.
Resubmit with changes to try to fix the build-bot issue.
Reviewed by Aaron Ballman
llvm-svn: 214432
This patch is necessary to support constant expressions which replaces the integer value in the loop hint attribute with an expression. The integer value was also storing the pragma’s state for options like vectorize(enable/disable) and the pragma unroll and nounroll directive. The state variable is introduced to hold the state of those options/pragmas. This moves the validation of the state (keywords) from SemaStmtAttr handler to the loop hint annotation token handler.
Reviewed by Aaron Ballman
llvm-svn: 214333
This isn't nearly as elaborate as the GCC inline asm which emits an
array of source locations, but it's very, very hard to trigger backend
diagnostics in MS inline asm because we parse it up front with good
source information, unlike GCC inline asm.
Currently I can trigger a "inline assembly requires more registers than
available" diagnostic with this code:
void foo();
void bar() {
__asm pusha
__asm call foo
__asm popa
}
However, if I committed that as a test case, I would have to remove it
once I fix PR20052.
llvm-svn: 214141
Originally committed in r211722, this fixed one case of dtor calls being
emitted without locations (this causes problems for debug info if the
call is then inlined), this caught only some of the cases.
Instead of trying to re-enable the location before the cleanup, simply
re-enable the location immediately after the unconditional branches in
question using a scoped device to ensure the no-location state doesn't
leak out arbitrarily.
llvm-svn: 212761
[Clang part]
These patches rename the loop unrolling and loop vectorizer metadata
such that they have a common 'llvm.loop.' prefix. Metadata name
changes:
llvm.vectorizer.* => llvm.loop.vectorizer.*
llvm.loopunroll.* => llvm.loop.unroll.*
This was a suggestion from an earlier review
(http://reviews.llvm.org/D4090) which added the loop unrolling
metadata.
Patch by Mark Heffernan.
llvm-svn: 211712
This reverts commit r211096. Looks like it broke the msvc build:
SemaOpenMP.cpp(140) : error C4519: default template arguments are only allowed on a class template
llvm-svn: 211113
Since the continuation block of the if statement is emitted within the
condition scope this had the undesirable effect of creating a line table
entry at the end of the then or else statement, a line that may have never
been executed.
PR19864 / rdar://problem/17052973
llvm-svn: 209764
It also adds a simple initial version of codegen for pragma omp simd (it will change in the future to support all the clauses).
Differential revision: http://reviews.llvm.org/D3644
llvm-svn: 209411
condition to a constant and emit only the relevant statement. In that
case, we were previously creating the epilog jump destination, a cleanup
scope, and emitting any condition variable into it. Instead, we can emit
the condition variable (if we have one) into the cleanup scope used for
the entire folded case sequence. We avoid creating a jump dest, a basic
block, and an extra cleanup scope. Win!
llvm-svn: 207888
CapturedStmt was being ignored by instrumentation based profiling, and
its counters attributed to the containing function. Instead, we need
to treat this as a top level entity, like we do with blocks.
llvm-svn: 206231
are not associated with any source lines.
Previously, if the Location of a Decl was empty, EmitFunctionStart would
just keep using CurLoc, which would sometimes be correct (e.g., thunks)
but in other cases would just point to a hilariously random location.
This patch fixes this by completely eliminating all uses of CurLoc from
EmitFunctionStart and rather have clients explicitly pass in a
SourceLocation for the function header and the function body.
rdar://problem/14985269
llvm-svn: 205999
This adds Clang support for the ARM64 backend. There are definitely
still some rough edges, so please bring up any issues you see with
this patch.
As with the LLVM commit though, we think it'll be more useful for
merging with AArch64 from within the tree.
llvm-svn: 205100
r203364: what was use_iterator is now user_iterator, and there is
a use_iterator for directly iterating over the uses.
This also switches to use the range-based APIs where appropriate.
llvm-svn: 203365
Previously, we made one traversal of the AST prior to codegen to assign
counters to the ASTs and then propagated the count values during codegen. This
patch now adds a separate AST traversal prior to codegen for the
-fprofile-instr-use option to propagate the count values. The counts are then
saved in a map from which they can be retrieved during codegen.
This new approach has several advantages:
1. It gets rid of a lot of extra PGO-related code that had previously been
added to codegen.
2. It fixes a serious bug. My original implementation (which was mailed to the
list but never committed) used 3 counters for every loop. Justin improved it to
move 2 of those counters into the less-frequently executed breaks and continues,
but that turned out to produce wrong count values in some cases. The solution
requires visiting a loop body before the condition so that the count for the
condition properly includes the break and continue counts. Changing codegen to
visit a loop body first would be a fairly invasive change, but with a separate
AST traversal, it is easy to control the order of traversal. I've added a
testcase (provided by Justin) to make sure this works correctly.
3. It improves the instrumentation overhead, reducing the number of counters for
a loop from 3 to 1. We no longer need dedicated counters for breaks and
continues, since we can just use the propagated count values when visiting
breaks and continues.
To make this work, I needed to make a change to the way we count case
statements, going back to my original approach of not including the fall-through
in the counter values. This was necessary because there isn't always an AST node
that can be used to record the fall-through count. Now case statements are
handled the same as default statements, with the fall-through paths branching
over the counter increments. While I was at it, I also went back to using this
approach for do-loops -- omitting the fall-through count into the loop body
simplifies some of the calculations and make them behave the same as other
loops. Whenever we start using this instrumentation for coverage, we'll need
to add the fall-through counts into the counter values.
llvm-svn: 201528
This fixes PR15768, where the sret parameter and the 'this' parameter
are in the wrong order.
Instance methods compiled by MSVC never return records in registers,
they always return indirectly through an sret pointer. That sret
pointer always comes after the 'this' parameter, for both __cdecl and
__thiscall methods.
Unfortunately, the same is true for other calling conventions, so we'll
have to change the overall approach here relatively soon.
Reviewers: rsmith
Differential Revision: http://llvm-reviews.chandlerc.com/D2664
llvm-svn: 200587
Due to statement expressions supported as GCC extension, it is possible
to put 'break' or 'continue' into a loop/switch statement but outside
its body, for example:
for ( ; ({ if (first) { first = 0; continue; } 0; }); )
This code is rejected by GCC if compiled in C mode but is accepted in C++
code. GCC bug 44715 tracks this discrepancy. Clang used code generation
that differs from GCC in both modes: only statement of the third
expression of 'for' behaves as if it was inside loop body.
This change makes code generation more close to GCC, considering 'break'
or 'continue' statement in condition and increment expressions of a
loop as it was inside the loop body. It also adds error for the cases
when 'break'/'continue' appear outside loop due to this syntax. If
code generation differ from GCC, warning is issued.
Differential Revision: http://llvm-reviews.chandlerc.com/D2518
llvm-svn: 199897
I misunderstood the discussion on this. The complexity here is
justified by the malloc overhead it saves.
This reverts commit r199302.
llvm-svn: 199700
Way back in r129652 we tried to avoid emitting an empty block at -O0
for switch cases that did nothing but break. This led to a poor
debugging experience as reported in PR9796, so we disabled the
optimization for -O0 but left it in for higher optimization levels in
r154420.
Since the whole point of this was to improve -O0, it's silly to keep
the complexity at all.
llvm-svn: 199302
adjustFallThroughCount isn't a good name, and the documentation was
even worse. This commit attempts to clarify what it's for and when to
use it.
llvm-svn: 199139
There are a number of places where we do PGO.setCurrentRegionCount(0)
directly after an unconditional branch. Give this operation a name so
that it's clearer why we're doing this.
llvm-svn: 199138
This call looks like it was an artifact of an earlier change, and
doesn't actually make sense. We begin a new region immediately anyway,
so it was mostly harmless.
llvm-svn: 199137
C and C++ don't emit an extra lexical scope for the compound statement
that is the body of an Objective-C method.
rdar://problem/15010825
llvm-svn: 198699
encodes the canonical rules for LLVM's style. I noticed this had drifted
quite a bit when cleaning up LLVM, so wanted to clean up Clang as well.
llvm-svn: 198686
Not long ago I made the CodeGen of for loops simplify the condition at
-O0 in the same way we do for if and conditionals. Unfortunately this
ties how loops and simple conditions work together too tightly, which
makes features such as instrumentation based PGO awkward.
Ultimately, we should find a more general way to simplify the logic in
a given condition, but for now we'll just avoid using EmitBranchOnBool
for loops, like we already do for while and do loops.
llvm-svn: 195438
A while ago EmitForStmt was changed to explicitly evaluate the
condition expression and create a branch instead of using
EmitBranchOnBool, so that the condition expression could be used for
some cleanup logic. The cleanup stuff has since been reorganized, and
this is no longer necessary.
In EmitCXXForRange, the evaluated condition was never used for
anything else. The logic was presumably modeled on EmitForStmt.
llvm-svn: 193994
An initialization somehow found its way in between a comment and the
block of code the comment is about. Moving the initialization makes
this less confusing.
llvm-svn: 193993
CodeGenFunction is run on only one function - a new object is made for
each new function. I would add an assertion/flag to this effect, but
there's an exception: ObjC properties involve emitting helper functions
that are all emitted by the same CodeGenFunction object, so such a check
is not possible/correct.
llvm-svn: 189277
between a block assignment and the entry of the block function. In reality
this wouldn't work anyway because blocks are predominantly created
on-the-fly inside of an ObjC method invocation.
The proper fix for the ambiguity is to use -gcolumn-info to differentiate
the breakpoints.
This is expected to break some block-related darwin-gdb tests.
rdar://problem/14039866
llvm-svn: 184157
Two variables with the same name declared in two if conditions in the same
scope are no longer coalesced into one.
rdar://problem/14024005
llvm-svn: 183597
X86's 'y' inline assembly constraint represents an MMX register, this change
prevents Clang from hitting an assertion when passed an incompatible type to
deal with.
llvm-svn: 183467
EmitCapturedStmt creates a captured struct containing all of the captured
variables, and then emits a call to the outlined function. This is similar in
principle to EmitBlockLiteral.
GenerateCapturedFunction actually produces the outlined function. It is based
on GenerateBlockFunction, but is much simpler. The function type is determined
by the parameters that are in the CapturedDecl.
Some changes have been added to this patch that were reviewed as part of the
serialization patch and moving the parameters to the captured decl.
Differential Revision: http://llvm-reviews.chandlerc.com/D640
llvm-svn: 181536
Un-break the gdb buildbot.
- Use the debug location of the return expression for the cleanup code
if the return expression is trivially evaluatable, regardless of the
number of stop points in the function.
- Ensure that any EH code in the cleanup still gets the line number of
the closing } of the lexical scope.
- Added a testcase with EH in the cleanup.
rdar://problem/13442648
llvm-svn: 181056
- Use the debug location of the return expression for the cleanup code
if the return expression is trivially evaluatable, regardless of the
number of stop points in the function.
- Ensure that any EH code in the cleanup still gets the line number of
the closing } of the lexical scope.
- Added a testcase with EH in the cleanup.
rdar://problem/13442648
llvm-svn: 180982
the actual parser and support arbitrary id-expressions.
We're actually basically set up to do arbitrary expressions here
if we wanted to.
Assembly operands permit things like A::x to be written regardless
of language mode, which forces us to embellish the evaluation
context logic somewhat. The logic here under template instantiation
is incorrect; we need to preserve the fact that an expression was
unevaluated. Of course, template instantiation in general is fishy
here because we have no way of delaying semantic analysis in the
MC parser. It's all just fishy.
I've also fixed the serialization of MS asm statements.
This commit depends on an LLVM commit.
llvm-svn: 180976
If there is cleanup code, the cleanup code gets the debug location of
the closing '}'. The subsequent ret IR-instruction does not get a
debug location. The return _expression_ will get the debug location
of the return statement.
If the function contains only a single, simple return statement,
the cleanup code may become the first breakpoint in the function.
In this case we set the debug location for the cleanup code
to the location of the return statement.
rdar://problem/13442648
llvm-svn: 180932
Alexey Bataev