By default, this hook tells GlobalISel to abort (report a fatal error)
when it encounters an error. The alternative will be to fall back on
SDISel.
This fall back will be removed when the bring-up of GlobalISel is over.
llvm-svn: 279879
This method allows to reset the state of a MachineFunction as if it was
just created. This will be used during the bring-up of GlobalISel to
provide a way to fallback on SelectionDAG. That way, we can start doing
correctness testing even if we are not able to select all functions via
the global instruction selector.
llvm-svn: 279876
This mapping is between pointers, which DenseMap is particularly good
at. Most targets aren't really affected, but if there's a lot of
subregister composition this can shave off a good chunk of time from
generating registers.
llvm-svn: 279875
Clang always assumes that files are utf-8. If an invalidly encoded character is
used in an identifier, clang always errors. If it's used in a character
literal, clang warns Winvalid-source-encoding (on by default). Clang never
checks the encoding of things in comments (adding this seems like a nice
feature if it doesn't impact performance).
For cl.exe /utf-8 (which enables /validate-charset), if a bad character is used
in an identifier, it emits both an error and a warning. If it's used in a
literal or a comment, it emits a warning.
So mapping /validate-charset to -Winvalid-source-encoding seems like a fairly
decent fit.
https://reviews.llvm.org/D23945
llvm-svn: 279872
Some unwind code is purposedly old enough to work on previous architecutres
and they're guaranteed to never trigger in newer architectures, so we need
to add .arch directives to tell the compiler/assembler that it's fine and we
know what we're doing.
Fixes PR29149.
llvm-svn: 279871
Summary:
If the scheduler clusters the loads, then the offsets will be sorted,
but it is possible for the scheduler to scheduler loads together
without out explicitly clustering them, which would give us non-sorted
offsets.
Also, we will want to do this if we move the load/store optimizer before
the scheduler.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D23776
llvm-svn: 279870
Summary:
There are a few different sgpr pressure sets, but we only care about
the one which covers all of the sgprs. We were using hard-coded
register pressure set names to determine the reg set id for the
biggest sgpr set. However, we were using the wrong name, and this
method is pretty fragile, since the reg pressure set names may
change.
The new method just looks for the pressure set that contains the most
reg units and sets that set as our SGPR pressure set. We've also
adopted the same technique for determining our VGPR pressure set.
Reviewers: arsenm
Subscribers: MatzeB, arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D23687
llvm-svn: 279867
This patch builds on LLVM r279776.
In this patch I've done some cleanup and abstracted three common steps runtime components have in their CMakeLists files, and added a fourth.
The three steps I abstract are:
(1) Add a top-level target (i.e asan, msan, ...)
(2) Set the target properties for sorting files in IDE generators
(3) Make the compiler-rt target depend on the top-level target
The new step is to check if a command named "runtime_register_component" is defined, and to call it with the component name.
The runtime_register_component command is defined in llvm/runtimes/CMakeLists.txt, and presently just adds the component to a list of sub-components, which later gets used to generate target mappings.
With this patch a new workflow for runtimes builds is supported. The new workflow when building runtimes from the LLVM runtimes directory is:
> cmake [...]
> ninja runtimes-configure
> ninja asan
The "runtimes-configure" target builds all the dependencies for configuring the runtimes projects, and runs CMake on the runtimes projects. Running the runtimes CMake generates a list of targets to bind into the top-level CMake so subsequent build invocations will have access to some of Compiler-RT's targets through the top-level build.
Note: This patch does exclude some top-level targets from compiler-rt libraries because they either don't install files (sanitizer_common), or don't have a cooresponding `check` target (stats).
llvm-svn: 279863
Summary:
This commit sets up the infrastructure to use reified error
descriptions, and moves ReportStackOverflow to the new system.
After we convert all the errors, we'll be able to simplify ScopedInErrorReport
and remove the older debugging mechanism which had some errors partly reified
in some way. We'll be able to maintain the external API.
ScopedInErrorReport will be able to track one of the reified errors at a time.
The purpose of this is so we have its destructor actually print the error and
possibly interface with the debugger (will depend on the platform, of course).
Reviewers: kcc, samsonov, timurrrr
Subscribers: kubabrecka, llvm-commits
Differential Revision: https://reviews.llvm.org/D23672
llvm-svn: 279862
This will expose the check targets for runtime project components into the top-level build. It will enable exposing targets like check-asan.
llvm-svn: 279861
Summary:
This is obviously an interesting case because it may motivate code
restructuring or LTO.
Reporting this requires instantiation of ORE in the loop where the call
sites are first gathered. I've checked compile-time
overhead *with* -Rpass-with-hotness and the worst slow-down was 6% in
mcf and quickly tailing off. As before without -Rpass-with-hotness
there is no overhead.
Because this could be a pretty noisy diagnostics, it is currently
qualified as 'verbose'. As of this patch, 'verbose' diagnostics are
only emitted with -Rpass-with-hotness, i.e. when the output is expected
to be filtered.
Reviewers: eraman, chandlerc, davidxl, hfinkel
Subscribers: tejohnson, Prazek, davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D23415
llvm-svn: 279860
We need to explicitly pass LLVM_INCLUDE_TESTS through from the top-level to the runtimes configuration because it isn't in LLVMConfig.cmake
llvm-svn: 279857
We already have obtained a pointer to the underlying GlobalObject,
use it directly to find the comdat, rather than using the
GlobalValue::getComdat which will do the same thing again.
llvm-svn: 279856
Summary:
There was a typo where \endcode was spelled as \encode and it was
keeping the whole file document from rendering. I also added in some \c
annotations for inline code stuff to make it look nicer.
Reviewers: jprice
Subscribers: parallel_libs-commits
Differential Revision: https://reviews.llvm.org/D23941
llvm-svn: 279855
In the code to detect fixed-point conversions and make use of AArch64's special
instructions, we weren't prepared for weird types. The fptosi direction got
fixed recently, but not the similar sitofp code.
llvm-svn: 279852
Like other recent changes near here, the goal is to allow vector types for
all of these folds. Splitting things up makes it easier to incrementally
enhance the code and easier to read.
llvm-svn: 279851
Reports an error instead. We can fix this later to make persistent variables
work, but right now we hit an LLVM assertion if we get this wrong.
<rdar://problem/27770298>
llvm-svn: 279850
MCContext already has many tasks, and separating CodeView out from it is
probably a good idea. The .cv_loc tracking was modelled on the DWARF
tracking which lived directly in MCContext.
Removes the inclusion of MCCodeView.h from MCContext.h, so now there are
only 10 build actions while I hack on CodeView support instead of 265.
llvm-svn: 279847
It's unclear how the old
%res(32) = G_ICMP { s32, s32 } intpred(eq), %0, %1
is actually different from an s1 verison
%res(1) = G_ICMP { s1, s32 } intpred(eq), %0, %1
so we'll remove it for now.
llvm-svn: 279843
This is triggered when we are compiling an implementation of a module,
it has relative includes to a VFS-mapped module with umbrella headers.
Currently we will find the real path to headers under the umbrella directory,
but the umbrella directories are using virtual path.
rdar://27951255
Thanks Ben and Richard for reviewing the patch!
Differential Revision: http://reviews.llvm.org/D23858
llvm-svn: 279838
Summary: Dead store elimination gets very expensive when large numbers of instructions need to be analyzed. This patch limits the number of instructions analyzed per store to the value of the memdep-block-scan-limit parameter (which defaults to 100). This resulted in no observed difference in performance of the generated code, and no change in the statistics for the dead store elimination pass, but improved compilation time on some files by more than an order of magnitude.
Reviewers: dexonsmith, bruno, george.burgess.iv, dberlin, reames, davidxl
Subscribers: davide, chandlerc, dberlin, davidxl, eraman, tejohnson, mbodart, llvm-commits
Differential Revision: https://reviews.llvm.org/D15537
llvm-svn: 279833
1. Add the "explicit" specifier to the single-argument constructor of Pattern
2. Reorder the fields to remove excessive padding (8 bytes).
Patch by Alexander Shaposhnikov!
llvm-svn: 279832
We can't mark ORE (a function pass) preserved as required by the loop
passes because that is how we ensure that the required passes like
LazyBFI are all available any time ORE is used. See the new comments in
the patch.
Instead we use it directly just like the inliner does in D22694.
As expected there is some additional overhead after removing the caching
provided by analysis passes. The worst case, I measured was
LNT/CINT2006_ref/401.bzip2 which regresses by 12%. As before, this only
affects -Rpass-with-hotness and not default compilation.
llvm-svn: 279829
Quentin Colombet