The big switch in `ARMBaseInstrInfo::getNumMicroOps` is missing cases for
`VLLDM` and `VLSTM`, which are currently defined with itineraries having a
dynamic count of micro-ops.
Assuming an optimistic case in which these instruction do not actually perform
loads or stores, and with the idea that Armv8-m cores are supposed to use the
new style scheduling models, this patch just sets the itinerary for those two
instructions to `NoItinerary`.
Differential Revision: https://reviews.llvm.org/D71266
Fix PR44284. This is probably not valid assembly but we should not crash.
Reviewed By: luporl, #powerpc, steven.zhang
Differential Revision: https://reviews.llvm.org/D71443
We've been marking VPT incompatible instructions as invalid for tail
predication too, though this may not strictly be true. VPT are
incompatible and, unless its the first predicate def in a loop,
they shouldn't be compatible for tail predication either.
Differential Revision: https://reviews.llvm.org/D71410
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
This fixes the buildbot failures.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
Summary:
This patch adds intrinsics for the following MVE instructions:
* VABAV
* VMLADAV, VMLSDAV
* VMLALDAV, VMLSLDAV
* VRMLALDAVH, VRMLSLDAVH
Each of the above 4 groups has a corresponding new LLVM IR intrinsic,
since the instructions cannot be easily represented using
general-purpose IR operations.
Reviewers: simon_tatham, ostannard, dmgreen, MarkMurrayARM
Reviewed By: MarkMurrayARM
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71062
Summary:
This fills in the remaining shift operations that take a single vector
input and an immediate shift count: the `vqshl`, `vqshlu`, `vrshr` and
`vshll[bt]` families.
`vshll[bt]` (which shifts each input lane left into a double-width
output lane) is the most interesting one. There are separate MC
instruction ids for shifting by exactly the input lane width and
shifting by less than that, because the instruction encoding is so
completely different for the lane-width special case. So I had to
write two sets of patterns to match based on the immediate shift
count, which involved adding a ComplexPattern matcher to avoid the
general-case pattern accidentally matching the special case too. For
that family I've made sure to add an llc codegen test for both
versions of each instruction.
I'm experimenting with a new strategy for parametrising the isel
patterns for all these instructions: adding extra fields to the
relevant `Instruction` subclass itself, which are ignored by the
Tablegen backends that generate the MC data, but can be retrieved from
each instance of that instruction subclass when it's passed as a
template parameter to the multiclass that generates its isel patterns.
A nice effect of that is that I can fill in those informational fields
using `let` blocks, rather than having to type them out once per
instruction at `defm` time.
(As a result, quite a lot of existing instruction `def`s are
reindented by this patch, so it's clearer to read with whitespace
changes ignored.)
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71458
We have custom lowering for operations converting to/from floating-point types
when we don't have hardware support for those types, and this doesn't interact
well with the target-independent legalization of the strict versions of these
operations. Fix this by adding similar custom lowering of the strict versions.
This fixes the last of the assertion failures in the CodeGen/ARM/fp-intrinsics
test, with the remaining failures due to poor instruction selection.
Differential Revision: https://reviews.llvm.org/D71127
This reverts commit 69fcfb7d35.
As shown in the test I attached to this commit, the change I reverted
causes a problem with "zext(cc1) - zext(cc2)". It commuted
the operands to the sub and used different logic to select the addc/subc
instruction:
sub zext (setcc), x => addcarry 0, x, setcc
sub sext (setcc), x => subcarry 0, x, setcc
... but that is bogus. I believe it is not possible to fold those commuted
patterns into any form of addcarry or subcarry. It may have worked as
intended before "AMDGPU: Change boolean content type to 0 or 1" because
the setcc was considered to be -1 rather than 1.
Differential Revision: https://reviews.llvm.org/D70978
Change-Id: If2139421aa6c935cbd1d925af58fe4a4aa9e8f43
Summary:
The use of a boolean isInteger flag (generally initialized using
VT.isInteger()) caused errors in our out-of-tree CHERI backend
(https://github.com/CTSRD-CHERI/llvm-project).
In our backend, pointers use a separate ValueType (iFATPTR) and therefore
.isInteger() returns false. This meant that getSetCCInverse() was using the
floating-point variant and generated incorrect code for us:
`(void *)0x12033091e < (void *)0xffffffffffffffff` would return false.
Committing this change will significantly reduce our merge conflicts
for each upstream merge.
Reviewers: spatel, bogner
Reviewed By: bogner
Subscribers: wuzish, arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70917
This reverts commit 9468e3334b.
There's a test that doesn't like this change. The RDA analysis
gets invalided by changes in the block, which is not taken into
account. Revert while I work on a fix for this.
Summary:
Better use of multiclass is used, and this helped find some existing
bugs in the predicated VMULL* intrinsics, which are now fixed.
The refactored VMULL[TB]Q_(INT|POLY)_M() intrinsics were discovered
to have an argument ("inactive") with incorrect type, and this required
a fix that is included in this whole patch. The argument "inactive"
should have been the same width (per vector element) as the return
type of the intrinsic, but was not in the case where the return type
was double the element width of the input types.
To assist in testing the multiclassing , and to thwart further gremlins,
the unit tests are improved in scope.
The *.ll tests are all generated by a small bit of throw-away scripting
from the corresponding *.c tests, and as such the diffs are large and
nasty. Look at the file rather than the diff.
Reviewers: dmgreen, miyuki, ostannard, simon_tatham
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71421
Updated pred_load patterns added to AArch64SVEInstrInfo.td by this patch
to use reg + imm non-temporal loads to fix previous test failures.
Original commit message:
Adds the following intrinsics:
- llvm.aarch64.sve.ldnt1
- llvm.aarch64.sve.stnt1
This patch creates masked loads and stores with the
MONonTemporal flag set when used with the intrinsics above.
Summary:
This is a quickfix for PR44275. An assertion that checks that the
DIExpression is valid failed due to attempting to create an entry value
for an indirect parameter. This started appearing after D69028, as the
indirect parameter started being represented using an DW_OP_deref,
rather than with the DBG_VALUE's second operand, meaning that the
isIndirectDebugValue() check in LiveDebugValues did not exclude such
parameters. A DIExpression that has an entry value operation can
currently not have any other operation, leading to the failed isValid()
check.
This patch simply makes us stop considering emitting entry values
for such parameters. To support such cases I think we at least need
to do the following changes:
* In DIExpression::isValid(): Remove the limitation that a
DW_OP_LLVM_entry_value operation can be the only operation in a
DIExpression.
* In LiveDebugValues::emitEntryValues(): Create an entry value of size
1, so that it only wraps the register operand, and not the whole
pre-existing expression (the DW_OP_deref).
* In LiveDebugValues::removeEntryValue(): Check that the new debug
value has the same debug expression as the original, rather than
checking that the debug expression is empty.
* In DwarfExpression::addMachineRegExpression(): Modify the logic so
that a DW_OP_reg* expression is emitted for the entry value.
That is how GCC emits entry values for indirect parameters. That will
currently not happen to due the DW_OP_deref causing the
!HasComplexExpression to fail. The LocationKind needs to be changed
also, rather than always emitting a DW_OP_stack_value for entry values.
There are probably more things I have missed, but that could hopefully
be a good starting point for emitting such entry values.
Reviewers: djtodoro, aprantl, jmorse, vsk
Reviewed By: aprantl, vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D71416
Currently we have the `Flags` property that allows to
set flags for a section. The problem is that it does not
allow us to set an arbitrary value, because of bit fields
validation under the hood. An arbitrary values can be used
to test specific broken cases.
We probably do not want to relax the validation, so this
patch adds a `ShSize` property that allows to
override the `sh_size`. It is inline with others `Sh*` properties
we have already.
Differential revision: https://reviews.llvm.org/D71411
I believe this is a leftover from when fp128 was softened to fp128
on X86-64. In that case type legalization must have been able to
create a load that was the same as N which would make this
replacement fail or assert. Since we no longer do that, this
check should be unneeded.
This is a rebase of the change over D70376, which fixes an LVI cache
invalidation issue that also affected this patch.
-----
Related to D69686. As noted there, LVI currently behaves differently
for integer and pointer values: For integers, the block value is always
valid inside the basic block, while for pointers it is only valid at
the end of the basic block. I believe the integer behavior is the
correct one, and CVP relies on it via its getConstantRange() uses.
The reason for the special pointer behavior is that LVI checks whether
a pointer is dereferenced in a given basic block and marks it as
non-null in that case. Of course, this information is valid only after
the dereferencing instruction, or in conservative approximation,
at the end of the block.
This patch changes the treatment of dereferencability: Instead of
including it inside the block value, we instead treat it as something
similar to an assume (it essentially is a non-nullness assume) and
incorporate this information in intersectAssumeOrGuardBlockValueConstantRange()
if the context instruction is the terminator of the basic block.
This happens either when determining an edge-value internally in LVI,
or when a terminator was explicitly passed to getValueAt(). The latter
case makes this change not fully NFC, because we can now fold
terminator icmps based on the dereferencability information in the
same block. This is the reason why I changed one JumpThreading test
(it would optimize the condition away without the change).
Of course, we do not want to recompute dereferencability on each
intersectAssume call, so we need a new cache for this. The
dereferencability analysis requires walking the entire basic block
and computing underlying objects of all memory operands. This was
previously done separately for each queried pointer value. In the
new implementation (both because this makes the caching simpler,
and because it is faster), I instead only walk the full BB once and
cache all the dereferenced pointers. So the traversal is now performed
only once per BB, instead of once per queried pointer value.
I think the overall model now makes more sense than before, and there
will be no more pitfalls due to differing integer/pointer behavior.
Differential Revision: https://reviews.llvm.org/D69914
(except for v4 loclists, which are sufficiently different to not fit
well in this generic implementation)
In subsequent patches I intend to refactor the DebugLoc and ranges data
structures to be more similar so I can common more of the implementation
here.
Summary:
Support alloca-referencing dbg.value in hwasan instrumentation.
Update AsmPrinter to emit DW_AT_LLVM_tag_offset when location is in
loclist format.
Reviewers: pcc
Subscribers: srhines, aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70753
Summary:
Add pattern matching for the following instructions:
- add, sub, subr, sqadd, sqsub, uqadd, uqsub
This patch required complex patterns to match the immediate with optinal left shift.
I re-used the Select function from the other SVE repo to implement the complext pattern.
I plan on doing another patch to also match constant vector of the same immediate.
Reviewers: sdesmalen, huntergr, rengolin, efriedma, c-rhodes, mgudim, kmclaughlin
Subscribers: tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, llvm-commits, amehsan
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71370
When we reason about the pointer argument that is byval we actually
reason about a local copy of the value passed at the call site. This was
not the case before and we wrongly introduced attributes based on the
surrounding function.
AAMemoryBehaviorArgument, AAMemoryBehaviorCallSiteArgument and
AANoCaptureCallSiteArgument are made aware of byval now. The code
to skip "subsuming positions" for reasoning follows a common pattern and
we should refactor it. A TODO was added.
Discovered by @efriedma as part of D69748.
Removed code duplication in ThreadCmpOverSelect and broke it
into several smaller functions for reusing them.
Differential Revision: https://reviews.llvm.org/D71158
This fold is done in IR by instcombine, and we have a special
form of it already here in DAGCombiner, but we want the more
general transform too:
https://rise4fun.com/Alive/3jZm
Name: general
Pre: (C1 + zext(C2) < 64)
%s = lshr i64 %x, C1
%t = trunc i64 %s to i16
%r = lshr i16 %t, C2
=>
%s2 = lshr i64 %x, C1 + zext(C2)
%a = and i64 %s2, zext((1 << (16 - C2)) - 1)
%r = trunc %a to i16
Name: special
Pre: C1 == 48
%s = lshr i64 %x, C1
%t = trunc i64 %s to i16
%r = lshr i16 %t, C2
=>
%s2 = lshr i64 %x, C1 + zext(C2)
%r = trunc %s2 to i16
...because D58017 exposes a regression without this fold.
Summary:
This adds support for embedding bitcode in a binary during LTO. The libLTO gains supports the `-lto-embed-bitcode` flag. The option allows users of the LTO library to embed a bitcode section. For example, LLD can pass the option via `ld.lld -mllvm=-lto-embed-bitcode`.
This feature allows doing something comparable to `clang -c -fembed-bitcode`, but on the (LTO) linker level. Having bitcode alongside native code has many use-cases. To give an example, the MacOS linker can create a `-bitcode_bundle` section containing bitcode. Also, having this feature built into LLVM is an alternative to 3rd party tools such as [[ https://github.com/travitch/whole-program-llvm | wllvm ]] or [[ https://github.com/SRI-CSL/gllvm | gllvm ]]. As with these tools, this feature simplifies creating "whole-program" llvm bitcode files, but in contrast to wllvm/gllvm it does not rely on a specific llvm frontend/driver.
Patch by Josef Eisl <josef.eisl@oracle.com>
Reviewers: #llvm, #clang, rsmith, pcc, alexshap, tejohnson
Reviewed By: tejohnson
Subscribers: tejohnson, mehdi_amini, inglorion, hiraditya, aheejin, steven_wu, dexonsmith, dang, cfe-commits, llvm-commits, #llvm, #clang
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D68213
This patch renames the LoopInfo::isRotated() method to LoopInfo::isRotatedForm()
to make it clear that the method checks whether the loop is in rotated form, not
whether the loop has been rotated by the LoopRotation pass.
Any llvm function with the "packed-stack" attribute will be compiled to use
the packed stack layout which reuses unused parts of the incoming register
save area. This is needed for building the Linux kernel.
Review: Ulrich Weigand
https://reviews.llvm.org/D70821
This is not quite NFC because I changed the SDLoc to use the more
standard 'N' (the starting node for the fold).
This transform is a special-case of a more general fold that we
do in IR, but it seems like the general fold is needed here too
to avoid a potential regression seen in D58017.
https://rise4fun.com/Alive/3jZm
In order to use assumptions, computeKnownBits needs a context
instruction. We can use the GEP, if it is an instruction. We already
pass the assumption cache, but it cannot be used without a context
instruction.
Reviewers: anemet, asbirlea, hfinkel, spatel
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D71264
This is the first patch adding an initial set of matrix intrinsics and a
corresponding lowering pass. This has been discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2019-October/136240.html
The first patch introduces four new intrinsics (transpose, multiply,
columnwise load and store) and a LowerMatrixIntrinsics pass, that
lowers those intrinsics to vector operations.
Matrixes are embedded in a 'flat' vector (e.g. a 4 x 4 float matrix
embedded in a <16 x float> vector) and the intrinsics take the dimension
information as parameters. Those parameters need to be ConstantInt.
For the memory layout, we initially assume column-major, but in the RFC
we also described how to extend the intrinsics to support row-major as
well.
For the initial lowering, we split the input of the intrinsics into a
set of column vectors, transform those column vectors and concatenate
the result columns to a flat result vector.
This allows us to lower the intrinsics without any shape propagation, as
mentioned in the RFC. In follow-up patches, we plan to submit the
following improvements:
* Shape propagation to eliminate the embedding/splitting for each
intrinsic.
* Fused & tiled lowering of multiply and other operations.
* Optimization remarks highlighting matrix expressions and costs.
* Generate loops for operations on large matrixes.
* More general block processing for operation on large vectors,
exploiting shape information.
We would like to add dedicated transpose, columnwise load and store
intrinsics, even though they are not strictly necessary. For example, we
could instead emit a large shufflevector instruction instead of the
transpose. But we expect that to
(1) become unwieldy for larger matrixes (even for 16x16 matrixes,
the resulting shufflevector masks would be huge),
(2) risk instcombine making small changes, causing us to fail to
detect the transpose, preventing better lowerings
For the load/store, we are additionally planning on exploiting the
intrinsics for better alias analysis.
Reviewers: anemet, Gerolf, reames, hfinkel, andrew.w.kaylor, efriedma, rengolin
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D70456
This adds ReachingDefAnalysis (RDA) to the VPTBlock pass, so that we can
reimplement findVCMPToFoldIntoVPS with just a few calls to RDA.
Differential Revision: https://reviews.llvm.org/D71330
Recommit e0b966643f. sub instructions were being generated for the
negated value, and for some reason they were the register only ones.
I think the problem was because I was grabbing the 'zero' from
vmovimm, which is a target constant. Now I'm just generating a new
Constant zero and so rsb instructions are now generated.
Original commit message:
The shift amount operand can be provided in a general purpose
register so sink it. Flip the vdup and negate so the existing
patterns can be used for matching.
Differential Revision: https://reviews.llvm.org/D70841
This helps delineate it in the output from later tables or other output.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D71344
Summary: Remove `Worklist` iteration and make use `checkForAllUses`. There is no test chage.
Reviewers: sstefan1, jdoerfert
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71352
During SelectionDAG, if a value which is associated with a DBG_VALUE
needs to be split across multiple registers, the DBG_VALUE will be split
into a set of fragment expressions to recreate the original value.
If one or more of these fragments cannot be created, they would
previously be silently dropped, causing the old debug value to live past
its expiry date. This patch fixes this issue by keeping invalid
fragments while setting their value as Undef.
Differential revision: https://reviews.llvm.org/D70248
This makes TimeTraceProfilerInstance thread local. Added
timeTraceProfilerFinishThread() which moves the thread local instance to
a global vector of instances. timeTraceProfilerWrite() then writes
recorded data from all instances.
Threads are identified based on their thread ids. Totals are reported
with artificial thread ids higher than the real ones.
Replaced raw pointer for TimeTraceProfilerInstance with unique_ptr.
Differential Revision: https://reviews.llvm.org/D71059
In order to properly implement these atomic we need one register more than other
binary atomics. It is used for storing result from comparing values in addition
to the one that is used for actual result of operation.
https://reviews.llvm.org/D71028
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
That patch adds checking into DWARFVerifier that the Skeleton
compilation unit does not have children.
Differential Revision: https://reviews.llvm.org/D71244
The shift amount operand can be provided in a general purpose
register so sink it. Flip the vdup and negate so the existing
patterns can be used for matching.
Differential Revision: https://reviews.llvm.org/D70841
Summary: AutoFDO compilation has two places that do inlining - the sample profile loader that does inlining with context sensitive profile, and the regular inliner as CGSCC pass. Ideally we want most inlining to come from sample profile loader as that is driven by context sensitive profile and also retains context sensitivity after inlining. However the reality is most of the inlining actually happens during regular inliner. To track the number of inline instances from sample profile loader and help move more inlining to sample profile loader, I'm adding statistics and optimization remarks for sample profile loader's inlining.
Reviewers: wmi, davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70584
No more hash collisions for memoperands. Now the MIRCanonicalization
pass shouldn't hit hash collisions when dealing with nearly identical
memory accessing instructions when their memoperands are in fact different.
Differential Revision: https://reviews.llvm.org/D71328
This has two main effects:
- Optimizes debug info size by saving 221.86 MB of obj file size in a
Windows optimized+debug build of 'all'. This is 3.03% of 7,332.7MB of
object file size.
- Incremental step towards decoupling target intrinsics.
The enums are still compact, so adding and removing a single
target-specific intrinsic will trigger a rebuild of all of LLVM.
Assigning distinct target id spaces is potential future work.
Part of PR34259
Reviewers: efriedma, echristo, MaskRay
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D71320
Soon Intrinsic::ID will be a plain integer, so this overload will not be
possible.
Rename both overloads to ensure that downstream targets observe this as
a build failure instead of a runtime failure.
Split off from D71320
Reviewers: efriedma
Differential Revision: https://reviews.llvm.org/D71381
This reverts commit 30038da15b. It causes
the stage2 thinLTO bot to fail with:
Assertion failed: (CU.getDIE(CalleeSP) && "Expected declaration subprogram DIE for callee")
rdar://57840415
The fp16 to larger than fp32 inserts an extend that need to
re-legalized if fp16 is promoted. But if we check for fp16
promotion first, then we can avoid emiting the fp_extend all
together.
This is the initial patch for the OpenMP-IR-Builder, as discussed on the
mailing list ([1] and later) and at the US Dev Meeting'19.
The design is similar to D61953 but:
- in a non-WIP status, with proper documentation and working.
- using a OpenMPKinds.def file to manage lists of directives, runtime
functions, types, ..., similar to the current Clang implementation.
- restricted to handle only (simple) barriers, to implement most
`#pragma omp barrier` directives and most implicit barriers.
- properly hooked into Clang to be used if possible (D69922).
- compatible with the remaining code generation.
Parts have been extracted into D69853.
The plan is to have multiple people working on moving logic from Clang
here once the initial scaffolding (=this patch) landed.
[1] http://lists.flang-compiler.org/pipermail/flang-dev_lists.flang-compiler.org/2019-May/000197.html
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim
Subscribers: mgorny, hiraditya, bollu, guansong, jfb, cfe-commits, llvm-commits, penzn, ppenzin
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69785
This is equivalent to the existing `import_name` and `import_module`
attributes which control the import names in the final wasm binary
produced by lld.
This maps the existing
This attribute currently requires a string rather than using the
symbol name for a couple of reasons:
1. Avoid confusion with static and dynamic linking which is
based on symbol name. Exporting a function from a wasm module using
this directive is orthogonal to both static and dynamic linking.
2. Avoids name mangling.
Differential Revision: https://reviews.llvm.org/D70520
Fix for https://bugs.llvm.org/show_bug.cgi?id=40846.
This adds a combine for cases where a (a + b) < a style overflow
check is performed, but with a + b being the result of
uadd.with.overflow, so the overflow result is also already available
and we can just use it. Subsequently GVN/CSE will deduplicate the extracts.
We can run into this situation if you have both a uadd.with.overflow
and a manual add + overflow check in the same function (on the same
operands), in which case GVN will rewrite the add to the with.overflow
result and leave you with this pattern.
The implementation is a bit ugly because I'm handling the various
canonicalization edge cases.
This does not yet handle the negated version of this pattern.
Differential Revision: https://reviews.llvm.org/D58644
If the pointer was loaded/stored before the null check, the check
is redundant and can be removed. For now the optimizers do not
remove the nullptr check, see https://gcc.godbolt.org/z/H2r5GG.
The patch allows to use more nonnull constraints. Also, it found
one more optimization in some PowerPC test. This is my first llvm
review, I am free to any comments.
Differential Revision: https://reviews.llvm.org/D71177
Fix for https://bugs.llvm.org/show_bug.cgi?id=44236. This code was
originally introduced in rG36512330041201e10f5429361bbd79b1afac1ea1.
However, the attribute copying was done in the wrong place (in general
call replacement, not thunk generation) and a proper fix was
implemented in D12581.
Previously this code was just unnecessary but harmless (because
FunctionComparator ensured that the attributes of the two functions
are exactly the same), but since byval was changed to accept a type
this copying is actively wrong and may result in malformed IR.
Differential Revision: https://reviews.llvm.org/D71173
This is an alternate fix for the bug discussed in D70595.
This also includes minimal tests for other in-tree targets
to show the problem more generally.
We check the number of uses as a predicate for whether some
value is free to negate, but that use count can change as we
rewrite the expression in getNegatedExpression(). So something
that was marked free to negate during the cost evaluation
phase becomes not free to negate during the rewrite phase (or
the inverse - something that was not free becomes free).
This can lead to a crash/assert because we expect that
everything in an expression that is negatible to be handled
in the corresponding code within getNegatedExpression().
This patch skips the use check during the rewrite phase.
So we determine that some expression isNegatibleForFree
(identically to without this patch), but during the rewrite,
don't rely on use counts to decide how to create the optimal
expression.
Differential Revision: https://reviews.llvm.org/D70975
Summary:
The current da printer shows the dependence without indicating
which instructions are being considered as the src vs dst. It
also silently ignores call instructions, despite the fact that
they create confused dependence edges to other memory
instructions. This patch addresses these two issues plus a
couple of minor non-functional improvements.
Authored By: bmahjour
Reviewer: dmgreen, fhahn, philip.pfaffe, chandlerc
Reviewed By: dmgreen, fhahn
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71088
Before z14, we did not have any FMA instruction for 128-bit
floating-point, so the @llvm.fma.f128 intrinsic needs to be
expanded to a libcall on those platforms.
This worked correctly for regular FMA, but was implemented
incorrectly for the strict version. This was not noticed
because we did not have test coverage for this case.
This patch fixes that incorrect expansion and adds the
missing test cases.
Summary:
This patch adds a method to determine if a loop is in rotated form (the latch is
an exiting block). It also modifies the getLoopGuardBranch method to use this
new method. This method can also be used in Loopfusion. Once this patch lands I
will make the corresponding changes there.
Reviewers: jdoerfert, Meinersbur, dmgreen, etiotto, Whitney, fhahn, hfinkel
Reviewed By: Meinersbur
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65958
This simplifies code where no extra details are required
Also don't write out detail when it is empty.
Differential Revision: https://reviews.llvm.org/D71347
There are a few places that check specific string attributes have
particular values, and assert if they are something else. The verifier
should catch these kinds of cases.
In some cases, we can rename a store operand, in order to enable pairing
of stores. For store pairs, that cannot be merged because the first
tored register is defined in between the second store, we try to find
suitable rename register.
First, we check if we can rename the given register:
1. The first store register must be killed at the store, which means we
do not have to rename instructions after the first store.
2. We scan backwards from the first store, to find the definition of the
stored register and check all uses in between are renamable. Along
they way, we collect the minimal register classes of the uses for
overlapping (sub/super)registers.
Second, we try to find an available register from the minimal physical
register class of the original register. A suitable register must not be
1. defined before FirstMI
2. between the previous definition of the register to rename
3. a callee saved register.
We use KILL flags to clear defined registers while scanning from the
beginning to the end of the block.
This triggers quite often, here are the top changes for MultiSource,
SPEC2000, SPEC2006 compiled with -O3 for iOS:
Metric: aarch64-ldst-opt.NumPairCreated
Program base patch diff
test-suite...nch/fourinarow/fourinarow.test 2.00 39.00 1850.0%
test-suite...s/ASC_Sequoia/IRSmk/IRSmk.test 46.00 80.00 73.9%
test-suite...chmarks/Olden/power/power.test 70.00 96.00 37.1%
test-suite...cations/hexxagon/hexxagon.test 29.00 39.00 34.5%
test-suite...nchmarks/McCat/05-eks/eks.test 100.00 132.00 32.0%
test-suite.../Trimaran/enc-rc4/enc-rc4.test 46.00 59.00 28.3%
test-suite...T2006/473.astar/473.astar.test 160.00 200.00 25.0%
test-suite.../Trimaran/enc-md5/enc-md5.test 8.00 10.00 25.0%
test-suite...telecomm-gsm/telecomm-gsm.test 113.00 139.00 23.0%
test-suite...ediabench/gsm/toast/toast.test 113.00 139.00 23.0%
test-suite...Source/Benchmarks/sim/sim.test 91.00 111.00 22.0%
test-suite...C/CFP2000/179.art/179.art.test 41.00 49.00 19.5%
test-suite...peg2/mpeg2dec/mpeg2decode.test 245.00 279.00 13.9%
test-suite...marks/Olden/health/health.test 16.00 18.00 12.5%
test-suite...ks/Prolangs-C/cdecl/cdecl.test 90.00 101.00 12.2%
test-suite...fice-ispell/office-ispell.test 91.00 100.00 9.9%
test-suite...oxyApps-C/miniGMG/miniGMG.test 430.00 465.00 8.1%
test-suite...lowfish/security-blowfish.test 39.00 42.00 7.7%
test-suite.../Applications/spiff/spiff.test 42.00 45.00 7.1%
test-suite...arks/mafft/pairlocalalign.test 2473.00 2646.00 7.0%
test-suite.../VersaBench/ecbdes/ecbdes.test 29.00 31.00 6.9%
test-suite...nch/beamformer/beamformer.test 220.00 235.00 6.8%
test-suite...CFP2000/177.mesa/177.mesa.test 2110.00 2252.00 6.7%
test-suite...ve-susan/automotive-susan.test 109.00 116.00 6.4%
test-suite...s-C/unix-smail/unix-smail.test 65.00 69.00 6.2%
test-suite...CI_Purple/SMG2000/smg2000.test 1194.00 1265.00 5.9%
test-suite.../Benchmarks/nbench/nbench.test 472.00 500.00 5.9%
test-suite...oxyApps-C/miniAMR/miniAMR.test 248.00 262.00 5.6%
test-suite...quoia/CrystalMk/CrystalMk.test 18.00 19.00 5.6%
test-suite...rks/tramp3d-v4/tramp3d-v4.test 7331.00 7710.00 5.2%
test-suite.../Benchmarks/Bullet/bullet.test 5651.00 5938.00 5.1%
test-suite...ternal/HMMER/hmmcalibrate.test 750.00 788.00 5.1%
test-suite...T2006/456.hmmer/456.hmmer.test 764.00 802.00 5.0%
test-suite...ications/JM/ldecod/ldecod.test 1028.00 1079.00 5.0%
test-suite...CFP2006/444.namd/444.namd.test 1368.00 1434.00 4.8%
test-suite...marks/7zip/7zip-benchmark.test 4471.00 4685.00 4.8%
test-suite...6/464.h264ref/464.h264ref.test 3122.00 3271.00 4.8%
test-suite...pplications/oggenc/oggenc.test 1497.00 1565.00 4.5%
test-suite...T2000/300.twolf/300.twolf.test 742.00 774.00 4.3%
test-suite.../Prolangs-C/loader/loader.test 24.00 25.00 4.2%
test-suite...0.perlbench/400.perlbench.test 1983.00 2058.00 3.8%
test-suite...ications/JM/lencod/lencod.test 4612.00 4785.00 3.8%
test-suite...yApps-C++/PENNANT/PENNANT.test 995.00 1032.00 3.7%
test-suite...arks/VersaBench/dbms/dbms.test 54.00 56.00 3.7%
Reviewers: efriedma, thegameg, samparker, dmgreen, paquette, evandro
Reviewed By: paquette
Differential Revision: https://reviews.llvm.org/D70450
The Isa register is a uint8_t, but at least on Windows this is
internally an unsigned char, which meant that prior to this patch it got
formatted as an ASCII character, rather than a decimal number. This
patch fixes this by casting it to a uint64_t before printing. I did it
this way instead of using a uint8_t formatter because a) it is simpler,
and b) it allows us to change the internal type of Isa in the future
without this code breaking.
I also took the opportunity to test the printing of the other standard
opcodes.
Reviewed by: probinson
Differential Revision: https://reviews.llvm.org/D71274
Summary: Rollback of parts of D71213. After digging more into the code I think we should leave 0 when creating the instructions (CreateMemcpy, CreateMaskedStore, CreateMaskedLoad). It's probably fine for MemorySanitizer because Alignement is resolved but I'm having a hard time convincing myself it has no impact at all (although tests are passing).
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71332
Summary:
These allow you to get and set the operator of a dag node, without
affecting its list of arguments.
`!getop` is slightly fiddly because in many contexts you need its
return value to have a static type more specific than 'any record'. It
works to say `!cast<BaseClass>(!getop(...))`, but it's cumbersome, so
I made `!getop` take an optional type suffix itself, so that can be
written as the shorter `!getop<BaseClass>(...)`.
Reviewers: hfinkel, nhaehnle
Reviewed By: nhaehnle
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71191
Summary:
Adds the following intrinsics:
- llvm.aarch64.sve.ldnt1
- llvm.aarch64.sve.stnt1
This patch creates masked loads and stores with the
MONonTemporal flag set when used with the intrinsics above.
Reviewers: sdesmalen, paulwalker-arm, dancgr, mgudim, efriedma, rengolin
Reviewed By: efriedma
Subscribers: tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71000
After creating a low-overhead loop, the loop update instruction was still
lingering around hurting performance. This removes dead loop update
instructions, which in our case are mostly SUBS instructions.
To support this, some helper functions were added to MachineLoopUtils and
ReachingDefAnalysis to analyse live-ins of loop exit blocks and find uses
before a particular loop instruction, respectively.
This is a first version that removes a SUBS instruction when there are no other
uses inside and outside the loop block, but there are some more interesting
cases in test/CodeGen/Thumb2/LowOverheadLoops/mve-tail-data-types.ll which
shows that there is room for improvement. For example, we can't handle this
case yet:
..
dlstp.32 lr, r2
.LBB0_1:
mov r3, r2
subs r2, #4
vldrh.u32 q2, [r1], #8
vmov q1, q0
vmla.u32 q0, q2, r0
letp lr, .LBB0_1
@ %bb.2:
vctp.32 r3
..
which is a lot more tricky because r2 is not only used by the subs, but also by
the mov to r3, which is used outside the low-overhead loop by the vctp
instruction, and that requires a bit of a different approach, and I will follow
up on this.
Differential Revision: https://reviews.llvm.org/D71007
This adds the family of `vshlq_n` and `vshrq_n` ACLE intrinsics, which
shift every lane of a vector left or right by a compile-time
immediate. They mostly work by expanding to the IR `shl`, `lshr` and
`ashr` operations, with their second operand being a vector splat of
the immediate.
There's a fiddly special case, though. ACLE specifies that the
immediate in `vshrq_n` can take values up to //and including// the bit
size of the vector lane. But LLVM IR thinks that shifting right by the
full size of the lane is UB, and feels free to replace the `lshr` with
an `undef` half way through the optimization pipeline. Hence, to keep
this legal in source code, I have to detect it at codegen time.
Logical (unsigned) right shifts by the element size are handled by
simply emitting the zero vector; arithmetic ones are converted into a
shift of one bit less, which will always give the same output.
In order to do that check, I also had to enhance the tablegen
MveEmitter so that it can cope with converting a builtin function's
operand into a bare integer to pass to a code-generating subfunction.
Previously the only bare integers it knew how to handle were flags
generated from within `arm_mve.td`.
Reviewers: dmgreen, miyuki, MarkMurrayARM, ostannard
Reviewed By: dmgreen, MarkMurrayARM
Subscribers: echristo, hokein, rdhindsa, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71065
Summary:
In the function `EarlyIfPredicator::shouldConvertIf()`, we call
`TII->isProfitableToIfCvt()` with `BranchProbability::getUnknown()`, it may
cause the potential assertion error for those hook which use `BranchProbability`
in `isProfitableToIfCvt()`, for example `SystemZ`.
`SystemZ` use `Probability < BranchProbability(1, 8))` in the function
`SystemZInstrInfo::isProfitableToIfCvt()`, if we call this function with
`BranchProbability::getUnknown()`, it will cause assertion error.
This patch is to fix the potential bug.
Reviewed By: ThomasRaoux
Differential Revision: https://reviews.llvm.org/D71273
This iterator range just includes physical registers and register masks,
which are interesting when dealing with register liveness.
Reviewers: evandro, t.p.northover, paquette, MatzeB, arsenm
Reviewed By: paquette
Differential Revision: https://reviews.llvm.org/D70562
PowerPC has instruction to do the semantics of this piece of code:
vector int foo(vector int m, vector int n) {
return (m + n + 1) >> 1;
}
This patch is adding the match rule to select it.
Differential Revision: https://reviews.llvm.org/D71002
I think this is no longer needed. The system should take care
of legalizing any new nodes that are added. I think this might
have been needed prior to r371709 or r307053.
Now, flags will result in differing hashes for a given MI. In effect, if
you have two instructions with everything identical except for their
flags then you should get two different hashes and fewer collisions.
Differential Revision: https://reviews.llvm.org/D70479
Summary: This is a follow up of D69281, it enables the X86 backend support for the FP comparision.
Reviewers: uweigand, kpn, craig.topper, RKSimon, cameron.mcinally, andrew.w.kaylor
Subscribers: hiraditya, llvm-commits, annita.zhang, LuoYuanke, LiuChen3
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70582
This reverts 3e1aee2ba7 in favor
of a different approach.
Scalarizing isn't great codegen, but making the type illegal was
interfering with k constraint in inline assembly.
This allows a call site tag in CU A to reference a callee DIE in CU B
without resorting to creating an incomplete duplicate DIE for the callee
inside of CU A.
We already allow cross-CU references of subprogram declarations, so it
doesn't seem like definitions ought to be special.
This improves entry value evaluation and tail call frame synthesis in
the LTO setting. During LTO, it's common for cross-module inlining to
produce a call in some CU A where the callee resides in a different CU,
and there is no declaration subprogram for the callee anywhere. In this
case llvm would (unnecessarily, I think) emit an empty DW_TAG_subprogram
in order to fill in the call site tag. That empty 'definition' defeats
entry value evaluation etc., because the debugger can't figure out what
it means.
As a follow-up, maybe we could add a DWARF verifier check that a
DW_TAG_subprogram at least has a DW_AT_name attribute.
rdar://46577651
Differential Revision: https://reviews.llvm.org/D70350
Currently for extern variables with section attribute, those
BTF_KIND_VARs will not be placed in any DataSec. This is
inconvenient as any other generated BTF_KIND_VAR belongs to
one DataSec. This patch put these extern variables into
".extern" section so bpf loader can have a consistent
processing mechanism for all data sections and variables.
This caused non-determinism in the compiler, see command on the Phabricator
code review.
> This patch addresses a performance problem reported in PR43855, and
> present in the reapplication in in 001574938e5. It turns out that
> MachineSink will (often) move instructions to the first block that
> post-dominates the current block, and then try to sink further. This
> means if we have a lot of conditionals, we can needlessly create large
> numbers of DBG_VALUEs, one in each block the sunk instruction passes
> through.
>
> To fix this, rather than immediately sinking DBG_VALUEs, record them in
> a pass structure. When sinking is complete and instructions won't be
> sunk any further, new DBG_VALUEs are added, avoiding lots of
> intermediate DBG_VALUE $noregs being created.
>
> Differential revision: https://reviews.llvm.org/D70676
This adds support for printing improved missing feature error messages
from the assembler, which now indicates which feature caused the parse
to fail.
Differential Revision: https://reviews.llvm.org/D69899
This patch introduced the VFDatabase, the framework proposed in
http://lists.llvm.org/pipermail/llvm-dev/2019-June/133484.html. [*]
In this patch the VFDatabase is used to bridge the TargetLibraryInfo
(TLI) calls that were previously used to query for the availability of
vector counterparts of scalar functions.
The VFISAKind field `ISA` of VFShape have been moved into into VFInfo,
under the assumption that different vector ISAs may provide the same
vector signature. At the moment, the vectorizer accepts any of the
available ISAs as long as the signature provided by the VFDatabase
matches the one expected in the vectorization process. For example,
when targeting AVX or AVX2, which both have 256-bit registers, the IR
signature of the two vector functions associated to the two ISAs is
the same. The `getVectorizedFunction` method at the moment returns the
first available match. We will need to add more heuristics to the
search system to decide which of the available version (TLI, AVX,
AVX2, ...) the system should prefer, when multiple versions with the
same VFShape are present.
Some of the code in this patch is based on the work done by Sumedh
Arani in https://reviews.llvm.org/D66025.
[*] Notice that in the proposal the VFDatabase was called SVFS. The
name VFDatabase is more in line with LLVM recommendations for
naming classes and variables.
Differential Revision: https://reviews.llvm.org/D67572
Summary:
This patch refactors instruction selection of the complex vector
addition, multiplication and multiply-add intrinsics, so that it is
now based on TableGen patterns rather than C++ code.
It also changes the first parameter (halving vs non-halving) of the
arm_mve_vcaddq IR intrinsic to match the corresponding instruction
encoding, hence it requires some changes in the tests.
The patch addresses David's comment in https://reviews.llvm.org/D71190
Reviewers: dmgreen, ostannard, simon_tatham, MarkMurrayARM
Reviewed By: dmgreen
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71245
SUMMARY:
Fixed a bug of XCOFFObjectFile.cpp when there is padding at the last csect of a sections.
when there is a tail padding of a section, but the value of CurrentAddressLocation do not be increased by the padding size. it will hit assert assert(CurrentAddressLocation == Section->Address && "We should have no padding between sections.");
Reviewers: daltenty,hubert.reinterpretcast,
Differential Revision: https://reviews.llvm.org/D70859
Extern variable usage in BPF is different from traditional
pure user space application. Recent discussion in linux bpf
mailing list has two use cases where debug info types are
required to use extern variables:
- extern types are required to have a suitable interface
in libbpf (bpf loader) to provide kernel config parameters
to bpf programs.
https://lore.kernel.org/bpf/CAEf4BzYCNo5GeVGMhp3fhysQ=_axAf=23PtwaZs-yAyafmXC9g@mail.gmail.com/T/#t
- extern types are required so kernel bpf verifier can
verify program which uses external functions more precisely.
This will make later link with actual external function no
need to reverify.
https://lore.kernel.org/bpf/87eez4odqp.fsf@toke.dk/T/#m8d5c3e87ffe7f2764e02d722cb0d8cbc136880ed
This patch added clang support to emit debuginfo for extern variables
with a TargetInfo hook to enable it. The debuginfo for the
extern variable is emitted only if that extern variable is
referenced in the current compilation unit.
Currently, only BPF target enables to generate debug info for
extern variables. The emission of such debuginfo is disabled for C++
at this moment since BPF only supports a subset of C language.
Emission with C++ can be enabled later if an appropriate use case
is identified.
-fstandalone-debug permits us to see more debuginfo with the cost
of bloated binary size. This patch did not add emission of extern
variable debug info with -fstandalone-debug. This can be
re-evaluated if there is a real need.
Differential Revision: https://reviews.llvm.org/D70696
This pattern is noted as a regression from:
D70246
...where we removed an over-aggressive shuffle simplification.
SimplifyDemandedVectorElts fails to catch this case when the insert has multiple uses,
so I'm proposing to pattern match the minimal sequence directly. This fold does not
conflict with any of our current shuffle undef/poison semantics.
Differential Revision: https://reviews.llvm.org/D71220
basic blocks
Originally applied in 72ce759928.
Fixed a build failure caused by incorrect use of cast instead of
dyn_cast.
This reverts commit 8b0780f795.
Summary:
This patch fixes a few issues when large arrays are allocated on the
stack. Currently, clang has inconsistent behaviour, for debug builds
there is an assertion failure when the array size on stack is around 2GB
but there is no assertion when the stack is around 8GB. For release
builds there is no assertion, the compilation succeeds but generates
incorrect code. The incorrect code generated is due to using
int/unsigned int instead of their 64-bit counterparts. This patch,
1) Removes the assertion in frame legality check.
2) Converts int/unsigned int in some places to the 64-bit variants. This
helps in generating correct code and removes the inconsistent behaviour.
3) Adds a test which runs without optimisations.
Reviewers: sdesmalen, efriedma, fhahn, aemerson
Reviewed By: efriedma
Subscribers: eli.friedman, fpetrogalli, kristof.beyls, hiraditya,
llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70496
This is not a new semantic feature. The syntax `(? 1, 2, 3)` was
disallowed by the parser in a dag //expression//, but there were
already ways to sneak a `?` into the operator field of a dag
//value//, e.g. by initializing it from a class template parameter
which is then set to `?` by the instantiating `def`.
This patch makes `?` in the operator slot syntactically legal, so it's
now easy to construct dags with an unset operator. Also, the semantics
of `!con` are relaxed so that it will allow a combination of set and
unset operator fields in the dag nodes it's concatenating, with the
restriction that all the operators that are //not// unset still have
to agree with each other.
Reviewers: hfinkel, nhaehnle
Reviewed By: hfinkel, nhaehnle
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71195
Summary:
Recognize wide compares where the wide operand is a splat of a scalar
value in the appropriate range and convert to the immediate variant of
the instruction.
Patch by Graham Hunter
Reviewers: sdesmalen, efriedma, dancgr, rovka, rengolin
Reviewed By: efriedma
Subscribers: tschuett, kristof.beyls, hiraditya, rkruppe, psnobl,
llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71009
Summary:
This fixes PR44135.
The special case when we promote a bitcast from a vector to an int
needs special handling when we are on a big-endian target.
Prior to this fix, for the added vec_to_int we see the following in the
SelectionDAG printouts
Type-legalized selection DAG: %bb.1 'foo:bb.1'
SelectionDAG has 9 nodes:
t0: ch = EntryToken
t2: v8i16,ch = CopyFromReg t0, Register:v8i16 %0
t17: v4i32 = bitcast t2
t23: i32 = extract_vector_elt t17, Constant:i32<3>
t8: ch,glue = CopyToReg t0, Register:i32 $r0, t23
t9: ch = ARMISD::RET_FLAG t8, Register:i32 $r0, t8:1
and I think here the extract_vector_elt is wrong and extracts the value
from the wrong index.
The program program should return the 32 bits made up of the elements at
index 4 and 5 in the vec6 array, but with
t23: i32 = extract_vector_elt t17, Constant:i32<3>
as far as I can tell, we will extract values that originally didn't even
exist in the vec6 vectore.
If we would instead extract the element at index 2 we would get the wanted
values.
With this fix we insert a right shift after the bitcast in
DAGTypeLegalizer::PromoteIntRes_BITCAST which then gives us
Type-legalized selection DAG: %bb.1 'vec_to_int:bb.1'
SelectionDAG has 9 nodes:
t0: ch = EntryToken
t2: v8i16,ch = CopyFromReg t0, Register:v8i16 %0
t23: v4i32 = bitcast t2
t27: i32 = extract_vector_elt t23, Constant:i32<2>
t8: ch,glue = CopyToReg t0, Register:i32 $r0, t27
t9: ch = ARMISD::RET_FLAG t8, Register:i32 $r0, t8:1
So now we get
t27: i32 = extract_vector_elt t23, Constant:i32<2>
which is what we want.
Similarly, the new int_to_vec testcase exposes a bug where we cast the other
direction. Then we instead need to add a left shift before the bitcast on
big-endian targets for the bits in the input integer to end up at the exptected
place in the vector.
Reviewers: bogner, spatel, craig.topper, t.p.northover, dmgreen, efriedma, SjoerdMeijer, samparker
Reviewed By: efriedma
Subscribers: eli.friedman, bjope, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70942
Summary:
The new OpenMPConstants.h is a location for all OpenMP related constants
(and helpers) to live.
This patch moves the directives there (the enum OpenMPDirectiveKind) and
rewires Clang to use the new location.
Initially part of D69785.
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim
Subscribers: jholewinski, ppenzin, penzn, llvm-commits, cfe-commits, jfb, guansong, bollu, hiraditya, mgorny
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69853
extern variable usage in BPF is different from traditional
pure user space application. Recent discussion in linux bpf
mailing list has two use cases where debug info types are
required to use extern variables:
- extern types are required to have a suitable interface
in libbpf (bpf loader) to provide kernel config parameters
to bpf programs.
https://lore.kernel.org/bpf/CAEf4BzYCNo5GeVGMhp3fhysQ=_axAf=23PtwaZs-yAyafmXC9g@mail.gmail.com/T/#t
- extern types are required so kernel bpf verifier can
verify program which uses external functions more precisely.
This will make later link with actual external function no
need to reverify.
https://lore.kernel.org/bpf/87eez4odqp.fsf@toke.dk/T/#m8d5c3e87ffe7f2764e02d722cb0d8cbc136880ed
This patch added bpf support to consume such info into BTF,
which can then be used by bpf loader. Function processFuncPrototypes()
only adds extern function definitions into BTF. The functions
with actual definition have been added to BTF in some other places.
Differential Revision: https://reviews.llvm.org/D70697
Making some changes to MIRVRegNamerUtils.cpp to use some more modern c++
features as well as some changes to generally make the code more concise
and more understandable.
I make this an NFCi because in one case I drop the whole
"if (!MO->isDef()) MO->setIsKill(false);" thing that was added in the
original implementation, generally because I don't think this is really
semantically sound. I also changed up the implementation of
VRegRenamer::createVirtualRegisterWithLowerName somewhat because I am
now lower-casing the name unconditionally because I confirmed that that
was in fact aditya_nandakumar@apple.com's intent.
In all other cases, behavior should not be changed.
Differential Revision: https://reviews.llvm.org/D71182
D34393 added MCCodePadder as an infrastructure for padding code with
NOP instructions. It lacked tests and was not being worked on since
then.
Intel has now worked on an assembler patch to mitigate performance loss
after applying microcode update for the Jump Conditional Code Erratum.
https://www.intel.com/content/www/us/en/support/articles/000055650/processors.html
This new patch shares similarity with MCCodePadder, but has a concrete
use case in mind and is being actively developed. The infrastructure it
introduces can potentially be used for general performance improvement
via alignment. Delete the unused MCCodePadder so that people can develop
the new feature from a clean state.
Reviewed By: jyknight, skan
Differential Revision: https://reviews.llvm.org/D71106
As discussed in https://reviews.llvm.org/D69998, we miss to create some dependency edges
if chained more than 2 instructions. Adding an assertion here if someone want to chain
more than 2 instructions.
Differential Revision: https://reviews.llvm.org/D71180
Don't try to fold away shuffles which can't be folded. Fix creation of
shufflevector constant expressions.
Differential Revision: https://reviews.llvm.org/D71147
The generated sequence with whilelo is unintuitive, but it's the best
I could come up with given the limited number of SVE instructions that
interact with scalar registers. The other sequence I was considering
was something like dup+cmpne, but an extra scalar instruction seems
better than an extra vector instruction.
Differential Revision: https://reviews.llvm.org/D71160
Summary:
Following on from rG884351547da2, this patch cleans up the logic for `xxpermdi`
peephole optimizations by converting two layers of nested `if`s to early breaks
and simplifying the logic.
Reviewers: hfinkel, nemanjai, jsji, lkail, #powerpc, steven.zhang
Reviewed By: #powerpc, steven.zhang
Subscribers: wuzish, steven.zhang, hiraditya, kbarton, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71170
Patch by vddvss (Colin Samples).
Summary:
Same as D60846 and D69571 but with a fix for the problem encountered
after them. Both times it was a missing context adjustment in the
handling of PHI nodes.
The reproducers created from the bugs that caused the old commits to be
reverted are included.
Reviewers: nikic, nlopes, mkazantsev, spatel, dlrobertson, uabelho, hakzsam, hans
Subscribers: hiraditya, bollu, asbirlea, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71181
Summary:
Split off of D67120.
Add the profile guided size optimization instrumentation / queries in the code
gen or target passes. This doesn't enable the size optimizations in those passes
yet as they are currently disabled in shouldOptimizeForSize (for non-IR pass
queries).
A second try after reverted D71072.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71149
Summary:
This is found during https://reviews.llvm.org/D70758
All the other record forms are having suffix o at the end.
ANDIo8 and ANDISo8 are the only two that put o before 8.
This patch rename them to be consistent with others.
Reviewers: #powerpc, hfinkel, nemanjai, lei, steven.zhang, echristo, jhibbits, joerg
Reviewed By: jhibbits
Subscribers: wuzish, hiraditya, kbarton, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70928
Refactor FinishCall to be more easily understandable as a precursor to
implementing indirect calls for AIX. The refactor tries to group similar
code together at the cost of some code duplication. The high level
overview of the refactor:
- Adds a number of helper functions for things like:
* Determining if a call is indirect.
* What the Opcode for a call is.
* Transforming the callee for a direct function call.
* Extracting the Chain operand from a CallSeqStart node.
* Building the operands of the call.
- Adds helpers for building the indirect call DAG nodes
(excluding the call instruction itself which is created in
`FinishCall`).
- Removes PrepareCall, which has been subsumed by the
helpers.
- Rename 'InFlag' to 'Glue'.
- FinishCall has been refactored to:
1) Set TOC pointer usage on the DAG for the TOC based
subtargets.
2) Calculate if a call is indirect.
3) Determine the Opcode to use for the call
instruction.
4) Transform the Callee for direct calls, or build
the DAG nodes for indirect calls.
5) Buildup the call operands.
6) Emit the call instruction.
7) If needed, emit the callSeqEnd Node and
finish lowering by calling `LowerCallResult`
Differential Revision: https://reviews.llvm.org/D70126
I rewrote the isel tablegen for MVE immediate shifts, and accidentally
removed the `let Predicates=[HasMVEInt]` that was wrapping the old
version, which seems to have allowed those rules to cause trouble on
non-MVE targets. That's what I get for only re-running the MVE tests.
Summary:
This adds the family of `vshlq_n` and `vshrq_n` ACLE intrinsics, which
shift every lane of a vector left or right by a compile-time
immediate. They mostly work by expanding to the IR `shl`, `lshr` and
`ashr` operations, with their second operand being a vector splat of
the immediate.
There's a fiddly special case, though. ACLE specifies that the
immediate in `vshrq_n` can take values up to //and including// the bit
size of the vector lane. But LLVM IR thinks that shifting right by the
full size of the lane is UB, and feels free to replace the `lshr` with
an `undef` half way through the optimization pipeline. Hence, to keep
this legal in source code, I have to detect it at codegen time.
Logical (unsigned) right shifts by the element size are handled by
simply emitting the zero vector; arithmetic ones are converted into a
shift of one bit less, which will always give the same output.
In order to do that check, I also had to enhance the tablegen
MveEmitter so that it can cope with converting a builtin function's
operand into a bare integer to pass to a code-generating subfunction.
Previously the only bare integers it knew how to handle were flags
generated from within `arm_mve.td`.
Reviewers: dmgreen, miyuki, MarkMurrayARM, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71065
The cycle values in modulo scheduling results can be negative.
The result of ModuloSchedule::getCycle() must be received as an int type.
Patch by Masaki Arai!
Differential Revision: https://reviews.llvm.org/D71122
CodeGenPrepare::placeDebugValues moves variable location intrinsics to be
immediately after the Value they refer to. This makes tracking of locations
very easy; but it changes the order in which assignments appear to the
debugger, from the source programs order to the order in which the
optimised program computes values. This then leads to PR43986 and PR38754,
where variable locations that were in a conditional block are made
unconditional, which is highly misleading.
This patch adjusts placeDbgValues to only re-order variable location
intrinsics if they use a Value before it is defined, significantly reducing
the damage that it does. This is still not 100% safe, but the rest of
CodeGenPrepare needs polishing to correctly update debug info when
optimisations are performed to fully fix this.
This will probably break downstream debuginfo tests -- if the
instruction-stream position of variable location changes isn't the focus of
the test, an easy fix should be to manually apply placeDbgValues' behaviour
to the failing tests, moving dbg.value intrinsics next to SSA variable
definitions thus:
%foo = inst1
%bar = ...
%baz = ...
void call @llvm.dbg.value(metadata i32 %foo, ...
to
%foo = inst1
void call @llvm.dbg.value(metadata i32 %foo, ...
%bar = ...
%baz = ...
This should return your test to exercising whatever it was testing before.
Differential Revision: https://reviews.llvm.org/D58453
Summary:
This patch adds intrinsics for the following MVE instructions:
* VCADD, VHCADD
* VCMUL
* VCMLA
Each of the above 3 groups has a corresponding new LLVM IR intrinsic.
Reviewers: simon_tatham, MarkMurrayARM, ostannard, dmgreen
Reviewed By: MarkMurrayARM
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D71190
With the extra optimisations we have done, these should now be fine to
enable by default. Which is what this patch does.
Differential Revision: https://reviews.llvm.org/D70968
This attempts to teach the cost model in Arm that code such as:
%s = shl i32 %a, 3
%a = and i32 %s, %b
Can under Arm or Thumb2 become:
and r0, r1, r2, lsl #3
So the cost of the shift can essentially be free. To do this without
trying to artificially adjust the cost of the "and" instruction, it
needs to get the users of the shl and check if they are a type of
instruction that the shift can be folded into. And so it needs to have
access to the actual instruction in getArithmeticInstrCost, which if
available is added as an extra parameter much like getCastInstrCost.
We otherwise limit it to shifts with a single user, which should
hopefully handle most of the cases. The list of instruction that the
shift can be folded into include ADC, ADD, AND, BIC, CMP, EOR, MVN, ORR,
ORN, RSB, SBC and SUB. This translates to Add, Sub, And, Or, Xor and
ICmp.
Differential Revision: https://reviews.llvm.org/D70966
This adds some extra cost model tests for shifts, and does some minor
adjustments to some Neon code to make it clear as to what it applies to.
Both NFC.
Summary:
Currently the describeLoadedValue() hook is assumed to describe the
value of the instruction's first explicit define. The hook will not be
called for instructions with more than one explicit define.
This commit adds a register parameter to the describeLoadedValue() hook,
and invokes the hook for all registers in the worklist.
This will allow us to for example describe instructions which produce
more than two parameters' values; e.g. Hexagon's various combine
instructions.
This also fixes situations in our downstream target where we may pass
smaller parameters in the high part of a register. If such a parameter's
value is produced by a larger copy instruction, we can't describe the
call site value using the super-register, and we instead need to know
which sub-register that should be used.
This also allows us to handle cases like this:
$ebx = [...]
$rdi = MOVSX64rr32 $ebx
$esi = MOV32rr $edi
CALL64pcrel32 @call
The hook will first be invoked for the MOV32rr instruction, which will
say that @call's second parameter (passed in $esi) is described by $edi.
As $edi is not preserved it will be added to the worklist. When we get
to the MOVSX64rr32 instruction, we need to describe two values; the
sign-extended value of $ebx -> $rdi for the first parameter, and $ebx ->
$edi for the second parameter, which is now possible.
This commit modifies the dbgcall-site-lea-interpretation.mir test case.
In the test case, the values of some 32-bit parameters were produced
with LEA64r. Perhaps we can in general cases handle such by emitting
expressions that AND out the lower 32-bits, but I have not been able to
land in a case where a LEA64r is used for a 32-bit parameter instead of
LEA64_32 from C code.
I have not found a case where it would be useful to describe parameters
using implicit defines, so in this patch the hook is still only invoked
for explicit defines of forwarding registers.
Reviewers: djtodoro, NikolaPrica, aprantl, vsk
Reviewed By: djtodoro, vsk
Subscribers: ormris, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D70431
Currently the describeLoadedValue() hook is assumed to describe the
value of the instruction's first explicit define. The hook will not be
called for instructions with more than one explicit define.
This commit adds a register parameter to the describeLoadedValue() hook,
and invokes the hook for all registers in the worklist.
This will allow us to for example describe instructions which produce
more than two parameters' values; e.g. Hexagon's various combine
instructions.
This also fixes a case in our downstream target where we may pass
smaller parameters in the high part of a register. If such a parameter's
value is produced by a larger copy instruction, we can't describe the
call site value using the super-register, and we instead need to know
which sub-register that should be used.
This also allows us to handle cases like this:
$ebx = [...]
$rdi = MOVSX64rr32 $ebx
$esi = MOV32rr $edi
CALL64pcrel32 @call
The hook will first be invoked for the MOV32rr instruction, which will
say that @call's second parameter (passed in $esi) is described by $edi.
As $edi is not preserved it will be added to the worklist. When we get
to the MOVSX64rr32 instruction, we need to describe two values; the
sign-extended value of $ebx -> $rdi for the first parameter, and $ebx ->
$edi for the second parameter, which is now possible.
This commit modifies the dbgcall-site-lea-interpretation.mir test case.
In the test case, the values of some 32-bit parameters were produced
with LEA64r. Perhaps we can in general cases handle such by emitting
expressions that AND out the lower 32-bits, but I have not been able to
land in a case where a LEA64r is used for a 32-bit parameter instead of
LEA64_32 from C code.
I have not found a case where it would be useful to describe parameters
using implicit defines, so in this patch the hook is still only invoked
for explicit defines of forwarding registers.
This caused "Too many bits for uint64_t" asserts when building Chromium. See
https://crbug.com/1031978#c2 for a reproducer. I'll follow up on the
llvm-commits thread with a creduced version.
> ARMCodeGenPrepare has already been generalized and renamed to
> TypePromotion. We've had it enabled and tested downstream for a
> while, so enable it by default.
>
> Differential Revision: https://reviews.llvm.org/D70998
This is another transform suggested in PR44153:
https://bugs.llvm.org/show_bug.cgi?id=44153
The backend for some targets already manages to get
this if it converts copysign to bitwise logic.
MVE doesn't have the range of shuffle instructions available in Neon. We
also cannot use the trick of cutting a difficult vector shuffle in half
to simplify things. Instead we need to be more careful about how we
lower shuffles.
This patch adds an extra combine that attempts to find "whole lane"
vmovs when lowering shuffles of smaller types. This helps us make some
shuffles a lot simpler, generating single lane movs for the parts that
can make use of it, falling back to the original shuffle for the rest.
Differential Revision: https://reviews.llvm.org/D69509
Alas, using half the available vector registers in a single instruction
is just too much for the register allocator to handle. The mve-vldst4.ll
test here fails when these instructions are enabled at present. This
patch disables the generation of VLD4 and VST4 by adding a
mve-max-interleave-factor option, which we currently default to 2.
Differential Revision: https://reviews.llvm.org/D71109
Currently we fail to pick the right insertion point when
PreviousLastPart of a first-order-recurrence is a PHI node not in the
LoopVectorBody. This can happen when PreviousLastPart is produce in a
predicated block. In that case, we should pick the insertion point in
the BB the PHI is in.
Fixes PR44020.
Reviewers: hsaito, fhahn, Ayal, dorit
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D71071
My patch 9db13b5a7d seems to have
caused some build bots to fail due to warnings that appear only
when using -Wcovered-switch-default.
This patch is an attempt to fix this by trying to avoid both the warning
"default label in switch which covers all enumeration values"
for the inner switch statements and at the same time the warning
"this statement may fall through"
for the outer switch statement in getVectorComparison
(SystemZISelLowering.cpp).
Generate types for global variables with "weak" attribute.
Keep allocation scope the same for both weak and non-weak
globals as ELF symbol table can determine whether a global
symbol is weak or not.
Differential Revision: https://reviews.llvm.org/D71162
AssumptionCache can be null in SimplifyCFGOptions. However, FoldCondBranchOnPHI() was not properly handling that when passing a null AssumptionCache to simplifyCFG.
Patch by Rodrigo Caetano Rocha <rcor.cs@gmail.com>
Reviewers: fhahn, lebedev.ri, spatel
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D69963
This adds support for constrained floating-point comparison intrinsics.
Specifically, we add:
declare <ty2>
@llvm.experimental.constrained.fcmp(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
declare <ty2>
@llvm.experimental.constrained.fcmps(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
The first variant implements an IEEE "quiet" comparison (i.e. we only
get an invalid FP exception if either argument is a SNaN), while the
second variant implements an IEEE "signaling" comparison (i.e. we get
an invalid FP exception if either argument is any NaN).
The condition code is implemented as a metadata string. The same set
of predicates as for the fcmp instruction is supported (except for the
"true" and "false" predicates).
These new intrinsics are mapped by SelectionDAG codegen onto two new
ISD opcodes, ISD::STRICT_FSETCC and ISD::STRICT_FSETCCS, again
representing quiet vs. signaling comparison operations. Otherwise
those nodes look like SETCC nodes, with an additional chain argument
and result as usual for strict FP nodes. The patch includes support
for the common legalization operations for those nodes.
The patch also includes full SystemZ back-end support for the new
ISD nodes, mapping them to all available SystemZ instruction to
fully implement strict semantics (scalar and vector).
Differential Revision: https://reviews.llvm.org/D69281
The file is intended to gather various VPlan transformations, not only
CFG related transforms. Actually, the only transformation there is not
CFG related.
Reviewers: Ayal, gilr, hsaito, rengolin
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D70732
Summary:
This patch fixes an issue where the PPC MI peephole optimization pass incorrectly remove a vector swap.
Specifically, the pass can combine a splat/swap to a splat/copy. It uses `TargetRegisterInfo::lookThruCopyLike` to determine that the operands to the splat are the same. However, the current logic only compares the operands based on register numbers. In the case where the splat operands are ultimately feed from the same physical register, the pass can incorrectly remove a swap if the feed register for one of the operands has been clobbered.
This patch adds a check to ensure that the registers feeding are both virtual registers or the operands to the splat or swap are both the same register.
Here is an example in pseudo-MIR of what happens in the test cased added in this patch:
Before PPC MI peephole optimization:
```
%arg = XVADDDP %0, %1
$f1 = COPY %arg.sub_64
call double rint(double)
%res.first = COPY $f1
%vec.res.first = SUBREG_TO_REG 1, %res.first, %subreg.sub_64
%arg.swapped = XXPERMDI %arg, %arg, 2
$f1 = COPY %arg.swapped.sub_64
call double rint(double)
%res.second = COPY $f1
%vec.res.second = SUBREG_TO_REG 1, %res.second, %subreg.sub_64
%vec.res.splat = XXPERMDI %vec.res.first, %vec.res.second, 0
%vec.res = XXPERMDI %vec.res.splat, %vec.res.splat, 2
; %vec.res == [ %vec.res.second[0], %vec.res.first[0] ]
```
After optimization:
```
; ...
%vec.res.splat = XXPERMDI %vec.res.first, %vec.res.second, 0
; lookThruCopyLike(%vec.res.first) == lookThruCopyLike(%vec.res.second) == $f1
; so the pass replaces the swap with a copy:
%vec.res = COPY %vec.res.splat
; %vec.res == [ %vec.res.first[0], %vec.res.second[0] ]
```
As best as I can tell, this has occurred since r288152, which added support for lowering certain vector operations to direct moves in the form of a splat.
Committed for vddvss (Colin Samples). Thanks Colin for the patch!
Differential Revision: https://reviews.llvm.org/D69497
Before this change, the *InstPrinter.cpp files of each target where some
of the slowest objects to compile in all of LLVM. See this snippet produced by
ClangBuildAnalyzer:
https://reviews.llvm.org/P8171$96
Search for "InstPrinter", and see that it shows up in a few places.
Tablegen was emitting a large switch containing a sequence of operand checks,
each of which created many conditions and many BBs. Register allocation and
jump threading both did not scale well with such a large repetitive sequence of
basic blocks.
So, this change essentially turns those control flow structures into
data. The previous structure looked like:
switch (Opc) {
case TGT::ADD:
// check alias 1
if (MI->getOperandCount() == N && // check num opnds
MI->getOperand(0).isReg() && // check opnd 0
...
MI->getOperand(1).isImm() && // check opnd 1
AsmString = "foo";
break;
}
// check alias 2
if (...)
...
return false;
The new structure looks like:
OpToPatterns: Sorted table of opcodes mapping to pattern indices.
\->
Patterns: List of patterns. Previous table points to subrange of
patterns to match.
\->
Conds: The if conditions above encoded as a kind and 32-bit value.
See MCInstPrinter.cpp for the details of how the new data structures are
interpreted.
Here are some before and after metrics.
Time to compile AArch64InstPrinter.cpp:
0m29.062s vs. 0m2.203s
size of the obj:
3.9M vs. 676K
size of clang.exe:
97M vs. 96M
I have not benchmarked disassembly performance, but typically
disassemblers are bottlenecked on IO and string processing, not alias
matching, so I'm not sure it's interesting enough to be worth doing.
Reviewers: RKSimon, andreadb, xbolva00, craig.topper
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D70650
The xor'ing behaviour is only used for msvc/crt environments, when we're targeting
macho the guard load code doesn't know about the xor in the epilog. Disable xor'ing
when targeting win32-macho to be consistent.
Differential Revision: https://reviews.llvm.org/D71095
D53794 introduced code to perform the FP_TO_UINT expansion via FP_TO_SINT in a way that would never expose floating-point exceptions in the intermediate steps. Unfortunately, I just noticed there is still a way this can happen. As discussed in D53794, the compiler now generates this sequence:
// Sel = Src < 0x8000000000000000
// Val = select Sel, Src, Src - 0x8000000000000000
// Ofs = select Sel, 0, 0x8000000000000000
// Result = fp_to_sint(Val) ^ Ofs
The problem is with the Src - 0x8000000000000000 expression. As I mentioned in the original review, that expression can never overflow or underflow if the original value is in range for FP_TO_UINT. But I missed that we can get an Inexact exception in the case where Src is a very small positive value. (In this case the result of the sub is ignored, but that doesn't help.)
Instead, I'd suggest to use the following sequence:
// Sel = Src < 0x8000000000000000
// FltOfs = select Sel, 0, 0x8000000000000000
// IntOfs = select Sel, 0, 0x8000000000000000
// Result = fp_to_sint(Val - FltOfs) ^ IntOfs
In the case where the value is already in range of FP_TO_SINT, we now simply compute Val - 0, which now definitely cannot trap (unless Val is a NaN in which case we'd want to trap anyway).
In the case where the value is not in range of FP_TO_SINT, but still in range of FP_TO_UINT, the sub can never be inexact, as Val is between 2^(n-1) and (2^n)-1, i.e. always has the 2^(n-1) bit set, and the sub is always simply clearing that bit.
There is a slight complication in the case where Val is a constant, so we know at compile time whether Sel is true or false. In that scenario, the old code would automatically optimize the sub away, while this no longer happens with the new code. Instead, I've added extra code to check for this case and then just fall back to FP_TO_SINT directly. (This seems to catch even slightly more cases.)
Original version of the patch by Ulrich Weigand. X86 changes added by Craig Topper
Differential Revision: https://reviews.llvm.org/D67105
Summary:
musttail calls should not require allocating extra stack for arguments.
Updates to arguments passed in memory should happen in place before the
epilogue.
This bug was mostly a missed optimization, unless inalloca was used and
store to push conversion fired.
If a reserved call frame was used for an inalloca musttail call, the
call setup and teardown instructions would be deleted, and SP
adjustments would be inserted in the prologue and epilogue. You can see
these are removed from several test cases in this change.
In the case where the stack frame was not reserved, i.e. call frame
optimization fires and turns argument stores into pushes, then the
imbalanced call frame setup instructions created for inalloca calls
become a problem. They remain in the instruction stream, resulting in a
call setup that allocates zero bytes (expected for inalloca), and a call
teardown that deallocates the inalloca pack. This deallocation was
unbalanced, leading to subsequent crashes.
Reviewers: hans
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71097
Summary:
Sample profile loader of AutoFDO tries to replay previous inlining using context sensitive profile. The replay only repeats inlining if the call site block is hot. As a result it punts inlining of small functions, some of which can be beneficial for size, and will still be inlined by CSGCC inliner later. The oscillation between sample profile loader's inlining and regular CGSSC inlining cause unnecessary loss of context-sensitive profile. It doesn't have much impact for inline decision itself, but it negatively affects post-inline profile quality as CGSCC inliner have to scale counts which is not as accurate as the original context sensitive profile, and bad post-inline profile can misguide code layout.
This change added regular Inline Cost calculation for sample profile loader, so we can inline small functions upfront under switch -sample-profile-inline-size. In addition -sample-profile-cold-inline-threshold is added so we can tune the separate size threshold - currently the default is chosen to be the same as regular inliner's cold call-site threshold.
Reviewers: wmi, davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70750
GCC says:
.../llvm/lib/DebugInfo/GSYM/FunctionInfo.cpp:195:12:
error: ‘InfoType’ is not a class, namespace, or enumeration
case InfoType::EndOfList:
^
Presumably, GCC thinks InfoType is a variable here. Work around it by
using the name IT as is done above.
This is a follow-up to D70607 where we made any
extract element on SLM more costly than default. But that is
pessimistic for extract from element 0 because that corresponds
to x86 movd/movq instructions. These generally have >1 cycle
latency, but they are probably implemented as single uop
instructions.
Note that no vectorization tests are affected by this change.
Also, no targets besides SLM are affected because those are
falling through to the default cost of 1 anyway. But this will
become visible/important if we add more specializations via cost
tables.
Differential Revision: https://reviews.llvm.org/D71023
Summary:
Split off of D67120.
Add the profile guided size optimization instrumentation / queries in the code
gen or target passes. This doesn't enable the size optimizations in those passes
yet as they are currently disabled in shouldOptimizeForSize (for non-IR pass
queries).
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71072
Current tail duplication integrated in bb layout is designed to increase the fallthrough from a BB's predecessor to its successor, but we have observed cases that duplication doesn't increase fallthrough, or it brings too much size overhead.
To overcome these two issues in function canTailDuplicateUnplacedPreds I add two checks:
make sure there is at least one duplication in current work set.
the number of duplication should not exceed the number of successors.
The modification in hasBetterLayoutPredecessor fixes a bug that potential predecessor must be at the bottom of a chain.
Differential Revision: https://reviews.llvm.org/D64376
SUMMARY:
if the size of Csect is zero, the Csect do not need write any data into sections
for example, the TOC Csect has zero size, it do not need invoke a
Asm.writeSectionData(W.OS, Csect.MCCsect, Layout);
Reviewers: daltenty
Subscribers: rupprecht, seiyai,hiraditya
Differential Revision: https://reviews.llvm.org/D71120
Summary:
The immediate forms of the MVE VQSHL instruction have MC names like
`MVE_VSLIimms8` and `MVE_VSLIimmu32`. Those names are confusing,
because VSLI is a completely different shift instruction with no
semantic relation to VQSHL. But it just happens to be defined
immediately before VQSHL in `ARMInstrMVE.td`, so this looks like a
copy-paste error. Renamed the ids to match the instruction name.
Reviewers: ostannard, dmgreen, MarkMurrayARM, miyuki
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71114
Summary:
When trying to calculate the offsets for the jump table entries
we fail to take into account the block alignment, which could be
greater than 4 bytes. This led to cases where the jump table
offset was too big to fit in a byte.
Reviewers: t.p.northover, sdesmalen, ostannard
Reviewed By: ostannard
Subscribers: ostannard, kristof.beyls, hiraditya, llvm-commits
Committed on behalf of David Sherwood (david-arm)
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70533
InnerLoopVectorizer's code called during VPlan execution still relies on
original IR's def-use relations to decide which vector code to generate,
limiting VPlan transformations ability to modify def-use relations and still
have ILV generate the vector code.
This commit moves GEP operand queries controlling how GEPs are widened to a
dedicated recipe and extracts GEP widening code to its own ILV method taking
those recorded decisions as arguments. This reduces ingredient def-use usage by
ILV as a step towards full VPlan-based def-use relations.
Differential revision: https://reviews.llvm.org/D69067
One of CodeGenPrepare's optimizations is to duplicate address calculations
into basic blocks, so that as much information as possible can be folded
into memory addressing operands. This is great -- but the dbg.value
variable location intrinsics are not updated in the same way. This can lead
to dbg.values referring to address computations in other blocks that will
never be encoded into the DAG, while duplicate address computations are
performed locally that could be used by the dbg.value. Some of these (such
as non-constant-offset GEPs) can't be salvaged past.
Fix this by, whenever we duplicate an address computation into a block,
looking for dbg.value users of the original memory address in the same
block, and redirecting those to the local computation.
Differential Revision: https://reviews.llvm.org/D58403
Summary:
Adds intrinsics for the following:
* cmphs, cmphi
* cmpge, cmpgt
* cmpeq, cmpne
* cmplt, cmple
* cmplo, cmpls
Includes a minor change to `TLI.getMemValueType` that fixes a crash due to the
scalable flag being dropped.
Reviewers: sdesmalen, efriedma, rengolin, rovka, dancgr, huntergr
Reviewed By: efriedma
Subscribers: tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70889
This patch implements the following changes:
1) SelectionDAGBuilder::visitConstrainedFPIntrinsic currently treats
each constrained intrinsic like a global barrier (e.g. a function call)
and fully serializes all pending chains. This is actually not required;
it is allowed for constrained intrinsics to be reordered w.r.t one
another or (nonvolatile) memory accesses. The MI-level scheduler already
allows for that flexibility, so it makes sense to allow it at the DAG
level as well.
This patch therefore changes the way chains for constrained intrisincs
are created, and handles them basically like load operations are handled.
This has the effect that constrained intrinsics are no longer serialized
against one another or (nonvolatile) loads. They are still serialized
against stores, but that seems hard to change with the current DAG chain
setup, and it also doesn't seem to be a big problem preventing DAG
2) The OPC_CheckFoldableChainNode check requires that each of the
intermediate nodes in a multi-node pattern match only has a single use.
This check tends to fail if those intermediate nodes are strict operations
as those have a chain output that typically indeed has another use.
However, we don't really need to consider chains here at all, since they
will all be rewritten anyway by UpdateChains later. Other parts of the
matcher therefore already ignore chains, but this hasOneUse check doesn't.
This patch replaces hasOneUse by a custom test that verifies there is no
more than one use of any non-chain output value.
In theory, this change could affect code unrelated to strict FP nodes,
but at least on SystemZ I could not find any single instance of that
happening
3) The SystemZ back-end currently does not allow matching multiply-and-
extend operations (32x32 -> 64bit or 64x64 -> 128bit FP multiply) for
strict FP operations. This was not possible in the past due to the
problems described under 1) and 2) above.
With those issues fixed, it is now possible to fully support those
instructions in strict mode as well, and this patch does so.
Differential Revision: https://reviews.llvm.org/D70913
That refactoring moves NonRelocatableStringpool into common CodeGen folder.
So that NonRelocatableStringpool could be used not only inside dsymutil.
Differential Revision: https://reviews.llvm.org/D71068
In general ValueHandleBase::ValueIsRAUWd shouldn't be called when not
all uses of the value were actually replaced, though, currently
formLCSSAForInstructions calls it when it inserts LCSSA-phis.
Calls of ValueHandleBase::ValueIsRAUWd were added to LCSSA specifically
to update/invalidate SCEV. In the best case these calls duplicate some
of the work already done by SE->forgetValue, though in case when SCEV of
the value is SCEVUnknown, SCEV replaces the underlying value of
SCEVUnknown with the new value (i.e. acts like LCSSA-phi actually fully
replaces the value it is created for), which leads to SCEV being
corrupted because LCSSA-phi rarely dominates all uses of its inputs.
Fixes bug https://bugs.llvm.org/show_bug.cgi?id=44058.
Reviewers: fhahn, efriedma, reames, sanjoy.google
Reviewed By: fhahn
Subscribers: hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70593
This is for the case where -gmlt -gsplit-dwarf -fsplit-dwarf-inlining
are used together in some but not all units during LTO (or, in the
reduced case, even without LTO) - ensuring that no split dwarf is used
(because split-dwarf-inlining puts the same data in the .o file, so
there's no need to duplicate it into the .dwo file)
We shouldn't assume that the returned result can be used to get
the other result.
This is prep-work for strict FP where we will also need to pass
the chain result along in more cases.
Summary:
Lookup functions are designed to not fully decode a FunctionInfo, LineTable or InlineInfo, they decode only what is needed into a LookupResult object. This allows lookups to avoid costly memory allocations and avoid parsing large amounts of information one a suitable match is found.
LookupResult objects contain the address that was looked up, the concrete function address range, the name of the concrete function, and a list of source locations. One for each inline function, and one for the concrete function. This allows one address to turn into multiple frames and improves the signal you get when symbolicating addresses in GSYM files.
Reviewers: labath, aprantl
Subscribers: mgorny, hiraditya, llvm-commits, lldb-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70993
Summary:
Add an option to allow the attribute propagation on the index to be
disabled, to allow a workaround for issues (such as that fixed by
D70977).
Also move the setting of the WithAttributePropagation flag on the index
into propagateAttributes(), and remove some old stale code that predated
this flag and cleared the maybe read/write only bits when we need to
disable the propagation (previously only when importing disabled, now
also when the new option disables it).
Reviewers: evgeny777, steven_wu
Subscribers: mehdi_amini, inglorion, hiraditya, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70984
* Context *
During register coalescing, we use rematerialization when coalescing is not
possible. That means we may rematerialize a super register when only a smaller
register is actually used.
E.g.,
0B v1 = ldimm 0xFF
1B v2 = COPY v1.low8bits
2B = v2
=>
0B v1 = ldimm 0xFF
1B v2 = ldimm 0xFF
2B = v2.low8bits
Where xB are the slot indexes.
Here v2 grew from a 8-bit register to a 16-bit register.
When that happens and subregister liveness is enabled, we create subranges for
the newly created value.
E.g., before remat, the live range of v2 looked like:
main range: [1r, 2r)
(Reads v2 is defined at index 1 slot register and used before the slot register
of index 2)
After remat, it should look like:
main range: [1r, 2r)
low 8 bits: [1r, 2r)
high 8 bits: [1r, 1d) <-- dead def
I.e., the unsused lanes of v2 should be marked as dead definition.
* The Problem *
Prior to this patch, the live-ranges from the previous exampel, would have the
full live-range for all subranges:
main range: [1r, 2r)
low 8 bits: [1r, 2r)
high 8 bits: [1r, 2r) <-- too long
* The Fix *
Technically, the code that this patch changes is not wrong:
When we create the subranges for the newly rematerialized value, we create only
one subrange for the whole bit mask.
In other words, at this point v2 live-range looks like this:
main range: [1r, 2r)
low & high: [1r, 2r)
Then, it gets wrong when we call LiveInterval::refineSubRanges on low 8 bits:
main range: [1r, 2r)
low 8 bits: [1r, 2r)
high 8 bits: [1r, 2r) <-- too long
Ideally, we would like LiveInterval::refineSubRanges to be able to do the right
thing and mark the dead lanes as such. However, this is not possible, because by
the time we update / refine the live ranges, the IR hasn't been updated yet,
therefore we actually don't have enough information to do the right thing.
Another option to fix the problem would have been to call
LiveIntervals::shrinkToUses after the IR is updated. This is not desirable as
this may have a noticeable impact on compile time.
Instead, what this patch does is when we create the subranges for the
rematerialized value, we explicitly create one subrange for the lanes that were
used before rematerialization and one for the lanes that were not used. The used
one inherits the live range of the main range and the unused one is just created
empty. The existing rematerialization code then detects that the unused one are
not live and it correctly sets dead def intervals for them.
https://llvm.org/PR41372
Summary:
AutoFDO's sample profile loader processes function in arbitrary source code order, so if I change the order of two functions in source code, the inline decision can change. This also prevented the use of context-sensitive profile to do specialization while inlining. This commit enforces SCC top-down order for sample profile loader. With this change, we can now do specialization, as illustrated by the added test case:
Say if we have A->B->C and D->B->C call path, we want to inline C into B when root inliner is B, but not when root inliner is A or D, this is not possible without enforcing top-down order. E.g. Once C is inlined into B, A and D can only choose to inline (B->C) as a whole or nothing, but what we want is only inline B into A and D, not its recursive callee C. If we process functions in top-down order, this is no longer a problem, which is what this commit is doing.
This change is guarded with a new switch "-sample-profile-top-down-load" for tuning, and it depends on D70653. Eventually, top-down can be the default order for sample profile loader.
Reviewers: wmi, davidxl
Subscribers: hiraditya, llvm-commits, tejohnson
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70655
Summary:
When sample profile loader decides not to inline a previously inlined call-site, we adjust the profile of outlined function simply by scaling up its profile counts by call-site count. This means the context-sensitive profile of that inlined instance will be thrown away. This commit try to keep context-sensitive profile for such cases:
- Instead of scaling outlined function's profile, we now properly merge the FunctionSamples of inlined instance into outlined function, including all recursively inlined profile.
- Instead of adjusting the profile for negative inline decision at the end of the sample profile loader pass, we do the profile merge right after processing each function. This change paired with top-down ordering of annotation/inline-replay (a separate diff) will make sure we recursively merge profile back before the profile is used for annotation and inline replay.
A new switch -sample-profile-merge-inlinee is added to enable the new profile merge for tuning. It should be the default behavior eventually.
Reviewers: wmi, davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70653
The loclists_table_base was being overwritten for each CU even though
only one loclists contribution is made so everything but the last CU
would have a label that was never defined and fail to assemble.
Summary: Previously we only handled the case where the csect hadn't been set up yet, so we'd hit an assert later on.
Reviewers: jasonliu, DiggerLin, stevewan
Reviewed By: jasonliu
Subscribers: hubert.reinterpretcast, wuzish, nemanjai, hiraditya, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71032
Summary:
Emit a value debug intrinsic (with OP_deref) when an alloca address is
passed to a function call after going through a bitcast.
This generates an FP or SP-relative location for the local variable in
the following case:
int x;
use((void *)&x;
Reviewers: aprantl, vsk, pcc
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70752
Summary:
Previously, it was not possible to skip running the localizer pass
conditionally. This patch adds an input function to the pass which
decides if the pass should run on the given MachineFunction or not.
No test case as there is no upstream target needs this functionality.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: rovka, hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71038
Summary:
This reverts commit c3b06d0c39.
Reason for revert: Caused miscompiles when inserting assume for undef.
Also adds a test to prevent similar breakage in future.
Fixes PR44154.
Reviewers: rnk, jdoerfert, efriedma, xbolva00
Reviewed By: rnk
Subscribers: thakis, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70933
Summary:
D68408 proposes to greatly improve our negation sinking abilities.
But in current canonicalization, we produce `sub A, zext(B)`,
which we will consider non-canonical and try to sink that negation,
undoing the existing canonicalization.
So unless we explicitly stop producing previous canonicalization,
we will have two conflicting folds, and will end up endlessly looping.
This inverts canonicalization, and adds back the obvious fold
that we'd miss:
* `sub [nsw] Op0, sext/zext (bool Y) -> add [nsw] Op0, zext/sext (bool Y)`
https://rise4fun.com/Alive/xx4
* `sext(bool) + C -> bool ? C - 1 : C`
https://rise4fun.com/Alive/fBl
It is obvious that `@ossfuzz_9880()` / `@lshr_out_of_range()`/`@ashr_out_of_range()`
(oss-fuzz 4871) are no longer folded as much, though those aren't really worrying.
Reviewers: spatel, efriedma, t.p.northover, hfinkel
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71064
Summary:
When MUL is the first operand to SUB, we can't use MLS because the accumulator
should be negated. Emit a NEG of the accumulator and an MLA instead, similar to
what we do for FMUL / FSUB fusing.
Reviewers: dmgreen, SjoerdMeijer, fhahn, Gerolf, mstorsjo, asbirlea
Reviewed By: asbirlea
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71067
The patch makes sure that the LastThrowing pointer does not point to any instruction deleted by call to DeleteDeadInstruction.
While iterating through the instructions the pass maintains a pointer to the lastThrowing Instruction. A call to deleteDeadInstruction deletes a dead store and other instructions feeding the original dead instruction which also become dead. The instruction pointed by the lastThrowing pointer could also be deleted by the call to DeleteDeadInstruction and thus it becomes a dangling pointer. Because of this, we see an error in the next iteration.
In the patch, we maintain a list of throwing instructions encountered previously and use the last non deleted throwing instruction from the container.
Patch by Ankit <quic_aankit@quicinc.com>
Reviewers: fhahn, bcahoon, efriedma
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D65326
This makes no difference currently because we don't apply FMF
to FP casts, but that may change.
This could also be a place to add a fold for select with fptrunc,
so it will make that patch easier/smaller.
This patch addresses a performance problem reported in PR43855, and
present in the reapplication in in 001574938e5. It turns out that
MachineSink will (often) move instructions to the first block that
post-dominates the current block, and then try to sink further. This
means if we have a lot of conditionals, we can needlessly create large
numbers of DBG_VALUEs, one in each block the sunk instruction passes
through.
To fix this, rather than immediately sinking DBG_VALUEs, record them in
a pass structure. When sinking is complete and instructions won't be
sunk any further, new DBG_VALUEs are added, avoiding lots of
intermediate DBG_VALUE $noregs being created.
Differential revision: https://reviews.llvm.org/D70676
Fix part of PR43855, resolving a problem that comes from the reapplication
in 001574938e5. If we have two DBG_VALUE insts in a block that specify
the location of the same variable, for example:
%0 = someinst
DBG_VALUE %0, !123, !DIExpression()
%1 = anotherinst
DBG_VALUE %1, !123, !DIExpression()
if %0 were to sink, the corresponding DBG_VALUE would sink too, past the
next DBG_VALUE, effectively re-ordering assignments. To fix this, I've
added a SeenDbgVars set recording what variable locations have been seen in
a block already (working bottom up), and now flag DBG_VALUEs that would
pass a later DBG_VALUE for the same variable.
NB, this only works for repeated DBG_VALUEs in the same basic block, the
general case involving control flow is much harder, which I've written
up in PR44117.
Differential revision: https://reviews.llvm.org/D70672
These were:
* D58386 / f5e1b718a6 / reverted in d382a8a768
* D58238 / ee50590e16 / reverted in a8db456b53
Of which the latter has a performance regression tracked in PR43855,
fixed by D70672 / D70676, which will be committed atomically with this
reapplication.
Contains a minor difference to account for a change in the IsCopyInstr
signature.
ARMCodeGenPrepare has already been generalized and renamed to
TypePromotion. We've had it enabled and tested downstream for a
while, so enable it by default.
Differential Revision: https://reviews.llvm.org/D70998
Summary:
Currently these function return the raw content of the appropriate table
header, which means they are relative to the DW_AT_{loc,rng}list_base,
and one has to relocate them in order to do anything.
This changes the functions to perform the relocation themselves, which
seems more clearer, particularly as they are sitting right next to the
find{Rng,Loc}listFromOffset functions, but one *cannot* simply take the
result of these functions and take pass them there.
The only effect of this patch is to change what value is dumped for the
DW_AT_ranges attribute, which I think is for the better, as previously
the values appeared to point into thin air.
(The main reason I am looking at this is because I was trying to
implement equivalent functionality in lldb's DWARFUnit, and was stumped
by this behavior.
Reviewers: dblaikie, JDevlieghere, aprantl
Subscribers: hiraditya, llvm-commits, SouraVX
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71006
Summary:
If a call is bundled then the code that looks for instructions that
produce parameter values would break when reaching the call's bundle
header, due to the `ifCall(/*AnyInBundle*/)` invocation returning true.
It is not enough to simply ignore bundle headers in the `isCall()`
invocation, as the bundle header may have defines of parameter registers
due to the call, meaning that such registers would incorrectly be
removed from the worklist. Therefore, do not look at bundle headers at
all.
Reviewers: djtodoro, NikolaPrica, aprantl, vsk
Reviewed By: aprantl, vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D71024
This patch removes the magic "main" JITDylib from ExecutionEngine. The main
JITDylib was created automatically at ExecutionSession construction time, and
all subsequently created JITDylibs were added to the main JITDylib's
links-against list by default. This saves a couple of lines of boilerplate for
simple JIT setups, but this isn't worth introducing magical behavior for.
ORCv2 clients should now construct their own main JITDylib using
ExecutionSession::createJITDylib and set up its linkages manually using
JITDylib::setSearchOrder (or related methods in JITDylib).
This patch adds forward iterators mc_difflist_iterator,
mc_subreg_iterator and mc_superreg_iterator, based on the existing
DiffListIterator. Those are used to provide iterator ranges over
sub- and super-register from TRI, which are slightly more convenient
than the existing MCSubRegIterator/MCSuperRegIterator. Unfortunately,
it duplicates a bit of functionality, but the new iterators are a bit
more convenient (and can be used with various existing iterator
utilities) and should probably replace the old iterators in the future.
This patch updates some existing users.
Reviewers: evandro, qcolombet, paquette, MatzeB, arsenm
Reviewed By: qcolombet
Differential Revision: https://reviews.llvm.org/D70565
This patch turns MachineOperandIteratorBase into a regular forward
iterator, which can be used with iterator_range.
It also adds mi_bundle_ops and const_mi_bundle_ops that return iterator
ranges over all operands in a bundle and updates a use of the old
iterator.
Reviewers: evandro, t.p.northover, paquette, MatzeB, arsenm
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D70561
Fix assertion error
```
bool llvm::MachineOperand::isRenamable() const: Assertion `Register::isPhysicalRegister(getReg()) && "isRenamable should only be checked on physical registers"' failed.
```
by checking if the register is 0 before invoking `isRenamable`.
As SIGPIPE is no longer in the IntSigs array, handle SIGPIPE before
handling any interrupt signals.
Thanks to Alexandre Ganea for pointing out the issue here.
Summary:
This patch mainly do such transformation
```
$R0 = OP ...
... // No read/clobber of $R0 and $R1
$R1 = COPY $R0 // $R0 is killed
```
Replace $R0 with $R1 and remove the COPY, we have
```
$R1 = OP ...
```
This transformation can also expose more opportunities for existing
copy elimination in MCP.
Differential Revision: https://reviews.llvm.org/D67794
I suspect this became unnecessary after r354161. Prior to that
we may have been going through the default expansion of FP_TO_UINT
on 64-bit targets and then ending up back in Custom X86 handling
to handle the FP_TO_SINT for it. Now we just Custom handle the
FP_TO_UINT directly. We already need to handle it for 32-bit mode
during type legalization so we wouldn't save any code by using
the default expansion on 64-bit.
Summary:
Reland after fixing an ASan failure by stopping outlining early if the
constraints for return address signing removed too many outlining candidates.
During AArch64 frame lowering instructions to enable return address
signing are inserted into functions if needed. Functions generated during
machine outlining don't run through target frame lowering and hence are
missing such instructions.
This patch introduces the following changes:
1. If not all functions that potentially participate in function outlining agree
on their return address signing scope and their return address signing key,
outlining is disabled for these functions.
2. If not all functions that potentially participate in function outlining agree
on their support for v8.3A features, outlining is disabled for these
functions.
3. If an outlining candidate would outline instructions that modify sp in a way
that invalidates return address signing, outlining is disabled for that
particular candidate.
4. If all candidate functions agree on the signing scope, signing key and their
support for v8.3 features, the outlined function behaves as if it had the
same scope and key attributes and as if it would provide the same v8.3A
support as the original functions.
Reviewers: ostannard, paquette
Reviewed By: ostannard
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70635
An interplay of code from D70210, along with code from the
Value-Numbering-esque hash-based namer from D70210, as well as some
crusty code from the original MIR-Canon code lead to multiple causes of
failure when canonicalizing or renaming vregs for MIR with multiple
basic blocks. This patch fixes those issues while deleting some no
longer needed code and adding a nice diamond test case to boot.
Differential Revision: https://reviews.llvm.org/D70478
Build ID is a protocol for looking up debug files that's already
supported by various tools including debuggers. For example, when
locating debug files, gdb would check the following directories:
- /usr/lib/debug/.build-id/ab/cdef1234.debug
- /usr/bin/ls.debug
- /usr/bin/.debug/ls.debug
- /usr/lib/debug/usr/bin/ls.debug
llvm-symbolizer currently consults all of these except for build ID
based one. This patch implements support for build ID lookup. The
set of debug directories to search is specified by the new option:
--debug-file-directory, whose name matches the debug-file-directory
variable used by gdb for the same purpose.
Differential Revision: https://reviews.llvm.org/D70759
Summary:
D69561/dde5893 enabled importing of readonly variables with references,
however, it introduced a bug relating to importing/internalization of
writeonly variables with references.
A fix for this was added in D70006/7f92d66. But this didn't work in
distributed ThinLTO mode. The reason is that the fix (importing the
writeonly var with a zeroinitializer) was only applied when there were
references on the writeonly var summary. In distributed ThinLTO mode,
where we only have a small slice of the index, we will not have the
references on the importing side if we are not importing those
referenced values. Rather than changing this handshaking (which will
require a lot of other changes, since that's how we know what to import
in the distributed backend clang invocation), we can simply always give
the writeonly variable a zero initializer.
Reviewers: evgeny777, steven_wu
Subscribers: mehdi_amini, inglorion, hiraditya, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70977
That patch fixes incompatible compilation unit type (DW_UT_skeleton) and root DIE (DW_TAG_compile_unit) error.
cat split-dwarf.cpp
int main()
{
int a = 1;
return 0;
}
clang++ -O -g -gsplit-dwarf -gdwarf-5 split-dwarf.cpp; llvm-dwarfdump --verify ./a.out | grep skeleton
error: Compilation unit type (DW_UT_skeleton) and root DIE (DW_TAG_compile_unit) do not match.
The fix is to change DW_TAG_compile_unit into DW_TAG_skeleton_unit when skeleton file is generated.
Differential Revision: https://reviews.llvm.org/D70880
Summary:
This patch introduces an API to build and modify vector shapes.
The validity of a VFShape can be checked with the
`hasValidParameterList` method, which is also run in an assertion each
time a VFShape is modified.
The field VFISAKind has been moved to VFInfo under the assumption that
different ISAs can map to the same VFShape (as it can be in the case
of vector extensions with the same registers size, for example AVX and
AVX2).
Reviewers: sdesmalen, jdoerfert, simoll, hsaito
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70513
Summary:
This follows a previous patch that changes the X86 datalayout to represent
mixed size pointers (32-bit sext, 32-bit zext, and 64-bit) with address spaces
(https://reviews.llvm.org/D64931)
This patch implements the address space cast lowering to the corresponding
sign extension, zero extension, or truncate instructions.
Related to https://bugs.llvm.org/show_bug.cgi?id=42359
Reviewers: rnk, craig.topper, RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69639
Summary:
Reland after fixing a bug that allowed outlining of SP modifying instructions
that invalidated return address signing.
During AArch64 frame lowering instructions to enable return address
signing are inserted into functions if needed. Functions generated during
machine outlining don't run through target frame lowering and hence are
missing such instructions.
This patch introduces the following changes:
1. If not all functions that potentially participate in function outlining agree
on their return address signing scope and their return address signing key,
outlining is disabled for these functions.
2. If not all functions that potentially participate in function outlining agree
on their support for v8.3A features, outlining is disabled for these
functions.
3. If an outlining candidate would outline instructions that modify sp in a way
that invalidates return address signing, outlining is disabled for that
particular candidate.
4. If all candidate functions agree on the signing scope, signing key and their
support for v8.3 features, the outlined function behaves as if it had the
same scope and key attributes and as if it would provide the same v8.3A
support as the original functions.
Reviewers: ostannard, paquette
Reviewed By: ostannard
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70635
Revise the coverage mapping format to reduce binary size by:
1. Naming function records and marking them `linkonce_odr`, and
2. Compressing filenames.
This shrinks the size of llc's coverage segment by 82% (334MB -> 62MB)
and speeds up end-to-end single-threaded report generation by 10%. For
reference the compressed name data in llc is 81MB (__llvm_prf_names).
Rationale for changes to the format:
- With the current format, most coverage function records are discarded.
E.g., more than 97% of the records in llc are *duplicate* placeholders
for functions visible-but-not-used in TUs. Placeholders *are* used to
show under-covered functions, but duplicate placeholders waste space.
- We reached general consensus about giving (1) a try at the 2017 code
coverage BoF [1]. The thinking was that using `linkonce_odr` to merge
duplicates is simpler than alternatives like teaching build systems
about a coverage-aware database/module/etc on the side.
- Revising the format is expensive due to the backwards compatibility
requirement, so we might as well compress filenames while we're at it.
This shrinks the encoded filenames in llc by 86% (12MB -> 1.6MB).
See CoverageMappingFormat.rst for the details on what exactly has
changed.
Fixes PR34533 [2], hopefully.
[1] http://lists.llvm.org/pipermail/llvm-dev/2017-October/118428.html
[2] https://bugs.llvm.org/show_bug.cgi?id=34533
Differential Revision: https://reviews.llvm.org/D69471
The PHI node checks for inner loop exits are too permissive currently.
As indicated by an existing comment, we should only allow LCSSA PHI
nodes that are part of reductions or are only used outside of the loop
nest. We ensure this by checking the users of the LCSSA PHIs.
Specifically, it is not safe to use an exiting value from the inner loop in the latch of the outer
loop.
It also moves the inner loop exit check before the outer loop exit
check.
Fixes PR43473.
Reviewers: efriedma, mcrosier
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D68144
Summary:
This is one more prep step necessary before the code gen pass instrumentation
code could go in.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70988
Variant on D70103. The caching is switched to always use a BB to
cache entry map, which then contains per-value caches. A separate
set contains value handles with a deletion callback. This allows us
to properly invalidate overdefined values.
A possible alternative would be to always cache by value first and
have per-BB maps/sets in the each cache entry. In that case we could
use a ValueMap and would avoid the separate value handle set. I went
with the BB indexing at the top level to make it easier to integrate
D69914, but possibly that's not the right choice.
Differential Revision: https://reviews.llvm.org/D70376
Summary:
Implement emitTCEntry for PPCTargetXCOFFStreamer.
Add TC csects to TOCCsects for object file writing.
Note:
1. I did not include any raw data testing for this object file generation
because TC entries raw data will all be 0 without relocation implemented.
I will add raw data testing as part of relocation testing later.
2. I removed "Symbol->setFragment(F);" for common symbols because we
don't need it, and if we have it then we would hit assertions below:
Assertion `(SymbolContents == SymContentsUnset ||
SymbolContents == SymContentsOffset) &&
"Cannot get offset for a common/variable symbol"' failed.
3.Fixed incorrect TOC-base alignment.
Differential Revision: https://reviews.llvm.org/D70798
When basic blocks are killed, either due to being empty or to being an if.then
or if.else block whose complement contains identical instructions, some of the
debug intrinsics in that block are lost. This patch sinks those intrinsics
into the single successor block, setting them Undef if necessary to
prevent debug info from falling out-of-date.
Differential Revision: https://reviews.llvm.org/D70318
The PT_GNU_PROPERTY is generated by a linker to describe the
.note.gnu.property section. The Linux kernel uses this program header to
locate the .note.gnu.property section.
It is described in "The Linux gABI extension"
Include support for llvm-readelf, llvm-readobj and the yaml reader and
writers.
Differential Revision: https://reviews.llvm.org/D70959
Summary:
This is a follow-up to D70769 and D70222, which allows propagation of
current directory down to ExpandResponseFiles for handling of relative paths.
Previously clients had to mutate FS to achieve that, which is not thread-safe
and can even be thread-hostile in the case of real file system.
Reviewers: sammccall
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D70857
Summary:
Adds intrinsics for the following:
* rbit
* revb
* revh
* revw
Patterns are also defined to map the 'llvm.bswap.*' intrinsic to the SVE
revb instruction.
Reviewers: sdesmalen, huntergr, dancgr, rengolin, efriedma, rovka
Reviewed By: sdesmalen
Subscribers: tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70960
SCEV caches the exiting blocks when computing exit counts. In
SimpleLoopUnswitch, we split the exit block of the loop to unswitch.
Currently we only invalidate the loop containing that exit block, but if
that block is the exiting block for a parent loop, we have stale cache
entries. We have to invalidate the top-most loop that contains the exit
block as exiting block. We might also be able to skip invalidating the
loop containing the exit block, if the exit block is not an exiting
block of that loop.
There are also 2 more places in SimpleLoopUnswitch, that use a similar
problematic approach to get the loop to invalidate. If the patch makes
sense, I will also update those places to a similar approach (they deal
with multiple exit blocks, so we cannot directly re-use
getTopMostExitingLoop).
Fixes PR43972.
Reviewers: skatkov, reames, asbirlea, chandlerc
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D70786
Summary:
We rely on this in our CHERI backend to address the GOT by generating a
$pc-relative addresses. For this we emit the following code sequence:
lui $1, %pcrel_hi(_CHERI_CAPABILITY_TABLE_-8)
daddiu $1, $1, %pcrel_lo(_CHERI_CAPABILITY_TABLE_-4)
cgetpccincoffset $c1, $1
However, without this change the addend is implicitly converted to
UINT32_MAX and an invalid pointer value is generated.
Reviewers: atanasyan
Reviewed By: atanasyan
Subscribers: merge_guards_bot, sdardis, hiraditya, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70953
Summary:
In our CHERI fork we use BUNDLE instructions to ensure that a
three-instruction sequence to generate a program-counter-relative value is
emitted without reordering or insertions (since that would break the 32-bit
offset computation).
Currently MipsAsmPrinter asserts when it encounters a pseudo instruction.
To handle BUNDLE we can simply skip the instruction which will then make
EmitInstruction() process the contents of the bundle in order.
Reviewers: atanasyan
Reviewed By: atanasyan
Subscribers: merge_guards_bot, sdardis, hiraditya, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70945
Summary:
In our CHERI fork we use BUNDLE instructions to ensure that a
three-instruction sequence to generate a program-counter-relative value is
emitted without reordering or insertions (since that would break the 32-bit
offset computation). This sequence is created in MipsExpandPseudo and we use
finalizeBundle() to create the BUNDLE instruction.
However, the delay slot filler currently breaks this pattern since the BUNDLE
will be removed and so all instructions are moved into the delay slot.
Since the delay slot only executes the first instruction, this results in
incorrect computations (and run-time crashes) if the branch is taken.
The original test cases uses CHERI instructions, so for the test case here
I simple filled a BUNDLE with a no-op DADDiu $sp_64, -16 and DADDiu $sp_64, 16.
Reviewers: atanasyan
Reviewed By: atanasyan
Subscribers: merge_guards_bot, sdardis, hiraditya, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70944
Summary:
I was tracking down a code-generation bug in this pass and found that the
added output was useful. It is also helpful to find out why a delay slot
could not be filled even though there is clearly a valid instruction (which
appears to mostly be caused by CFI instructions).
Reviewers: atanasyan
Reviewed By: atanasyan
Subscribers: merge_guards_bot, sdardis, hiraditya, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70940
Currently, getIntImmCost returns TCC_Free for almost all intrinsics.
For most AArch64 specific intrinsics however, it looks like integer
constants cannot be folded into most of them (at least the ones I checked).
Unless we know that we can fold integer operands with the intrinsic, we
handle more cases correctly by returning the cost to materialize the
immediate than return TCC_Free.
Reviewers: SjoerdMeijer, dmgreen, t.p.northover, ributzka
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D70669
Summary:
The default case handles the majority of MVTs so most of the individual
cases can be removed. Also added a case for floating point types.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D70955
Summary:
Catch the (admittedly unusual) case where SIFoldOperands attempts to fold 2
constant operands into the same SALU operation, with neither operand able to be
encoded as an inline constant.
Change-Id: Ibc48d662c9ffd8bbacd154976b0b1c257ace0927
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70896
We already have Symbols property to list regular symbols and
it is currently Optional<>. This patch makes DynamicSymbols to be optional
too. With this there is no need to define a dummy symbol anymore to trigger
creation of the .dynsym and it is now possible to define an empty .dynsym using
just the following line:
DynamicSymbols: []
(it is important to have when you do not want to have dynamic symbols,
but want to have a .dynsym)
Now the code is consistent and it helped to fix a bug: previously we
did not report an error when both Content/Size and an empty
Symbols/DynamicSymbols list were specified.
Differential revision: https://reviews.llvm.org/D70956
Constructor invocations such as `APFloat(APFloat::IEEEdouble(), 0.0)`
may seem like they accept a FP (floating point) value, but the overload
they reach is actually the `integerPart` one, not a `float` or `double`
overload (which only exists when `fltSemantics` isn't passed).
This may lead to possible loss of data, by the conversion from `float`
or `double` to `integerPart`.
To prevent future mistakes, a new constructor overload, which accepts
any FP value and marked with `delete`, to prevent its usage.
Fixes PR34095.
Differential Revision: https://reviews.llvm.org/D70425
Summary:
lldb's loclists parser has support for DW_LLE_start_end(x) encodings. To
avoid regressing when switching the implementation to llvm's, I add
parsing support for all previously unsupported location list encodings.
Reviewers: dblaikie, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, probinson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70949
Summary:
The dump() function already accepts a callback. This makes
getAbsoluteRanges do the same. The existing DWARFUnit overload is
implemented on top of the new function.
This enables usage of the debug_rnglists parser from within lldb (which
has it's own dwarf parser).
Reviewers: dblaikie, JDevlieghere, aprantl
Subscribers: hiraditya, probinson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70952
InstCombine may synthesize FMINNUM/FMAXNUM nodes from fcmp+select
sequences (where the fcmp is marked nnan). Currently, if the
target does not otherwise handle these nodes, they'll get expanded
to libcalls to fmin/fmax. However, these functions may reside in
libm, which may introduce a library dependency that was not originally
present in the source code, potentially resulting in link failures.
To fix this problem, add code to TargetLowering::expandFMINNUM_FMAXNUM
to expand FMINNUM/FMAXNUM to a compare+select sequence instead of the
libcall. This is done only if the node is marked as "nnan"; in this case,
the expansion to compare+select is always correct. This also suffices to
catch all cases where FMINNUM/FMAXNUM was synthesized as above.
Differential Revision: https://reviews.llvm.org/D70965
This is the example:
int foo(int a, int b, int c, int d) {
return a + b + c + d;
}
And this is the Dependency Graph:
+------+ +------+ +------+ +------+
| A | | B | | C | | D |
+--+--++ +---+--+ +--+---+ +--+---+
^ ^ ^ ^ ^ ^
| | | | | |
| | | |New1 +--------------+
| | | | |
| | | | +--+---+
| |New2 | +-------+ ADD1 |
| | | +--+---+
| | | Fuse ^
| | +-------------+
| +------------+
| |
| Fuse +--+---+
+----------->+ ADD2 |
| +------+
+--+---+
| ADD3 |
+------+
We need also create an artificial edge from ADD1 to A if
https://reviews.llvm.org/D69998 is landed. That will force the Node A scheduled
before the ADD1 and ADD2. But in fact, it is ok to schedule the Node A
in-between ADD3 and ADD2, as ADD3 and ADD2 are NOT a fusion pair because
ADD2 has been matched to ADD1. We are creating these unnecessary dependency
edges that override the heuristics.
Differential Revision: https://reviews.llvm.org/D70066
Summary: This is a follow-up of D70881. It models DAZ and FTZ for releated instructions.
Reviewers: craig.topper, RKSimon, andrew.w.kaylor
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70938
This is an alternative to D64662 that shares more code between
strict and non-strict nodes. It's modeled after the implementation
that I did for softening.
Differential Revision: https://reviews.llvm.org/D70867
Summary:
Forcing Local Exec TLS requires the use of copy relocations. Copy
relocations need special handling in the runtime linker when being used
against TLS symbols, which is present in glibc, but not in FreeBSD nor
musl, and so cannot be relied upon. Moreover, copy relocations are a
hack that embed the size of an object in the ABI when it otherwise
wouldn't be, and break protected symbols (which are expected to be DSO
local), whilst also wasting space, thus they should be avoided whenever
possible. As discussed in D70398, RISC-V should move away from forcing
Local Exec, and instead use Initial Exec like other targets, with
possible linker relaxation to follow. The RISC-V GCC maintainers also
intend to adopt this more-conventional behaviour (see
https://github.com/riscv/riscv-elf-psabi-doc/issues/122).
Reviewers: asb, MaskRay
Reviewed By: MaskRay
Subscribers: emaste, krytarowski, hiraditya, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, llvm-commits, bsdjhb
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70649
This reverts these two commits
[InstCombine] Turn (extractelement <1 x i64/double> (bitcast (x86_mmx))) into a single bitcast from x86_mmx to i64/double.
[InstCombine] Don't transform bitcasts between x86_mmx and v1i64 into insertelement/extractelement
We're seeing at least one internal test failure related to a
bitcast that was previously before an inline assembly block
containing emms being placed after it. This leads to the mmx
state ending up not empty after the emms. IR has no way to
make any specific guarantees about this. Reverting these patches
to get back to previous behavior which at least worked for this
test.
https://reviews.llvm.org/D70922
This adds a hook to allow targets to define exactly what extension
operation should be performed for widening constants. This handles cases
like widening i1 true which would end up becoming -1 which affects code
quality during combines.
Additionally, in order to stay consistent with how DAG is promoting
constants, we now signextend for byte sized types and zero extend
otherwise (by default). Targets can of course override this if
necessary.
Momchil Velikov