Fixes https://bugs.llvm.org/show_bug.cgi?id=48882.
If the input file does not exist (or has a reading error), the
following code will crash if there are two or more input addresses.
```
auto ResOrErr = Symbolizer.symbolizeInlinedCode(
ModuleName, {Offset, object::SectionedAddress::UndefSection});
Printer << (error(ResOrErr) ? DILineInfo() : ResOrErr.get().getFrame(0));
```
For the first address, `symbolizeInlinedCode` returns an error.
For the second address, `symbolizeInlinedCode` returns an empty result
(not an error) and `.getFrame(0)` will crash.
Differential revision: https://reviews.llvm.org/D95609
The cmake variable LLVM_ENABLE_DIA_SDK was being used here but
was undefined because config.h wasn't included.
Differential Revision: https://reviews.llvm.org/D93309
llvm-symbolizer used to use the DIA SDK for symbolization on
Windows; this patch switches to using native symbolization, which was
implemented recently.
Users can still make the symbolizer use DIA by adding the `-dia` flag
in the LLVM_SYMBOLIZER_OPTS environment variable.
Differential Revision: https://reviews.llvm.org/D91814
Seems users have enough different uses of the symbolizer where they
might have unknown binaries and offsets such that "best effort" behavior
is all that's expected of llvm-symbolizer - so even erroring on unknown
executables and out of bounds offsets might not be suitable.
This reverts commit 1de0199748.
This reverts commit a7b209a6d4.
This reverts commit 338dd138ea.
(this doesn't cover all cases - libDebugInfoDWARF has a default error
handler that prints errors without any exit code handling - I'll be
following up with a patch for that after this)
The switch from llvm::cl to OptTable (D83530) dropped --version, which
is needed by some users.
This patch also adds a -v alias, which is available in GNU addr2line.
The version dumping is similar to llvm-objcopy --version (exotic):
```
llvm-symbolizer
LLVM (http://llvm.org/):
LLVM version 12.0.0git
Optimized build with assertions.
Default target: x86_64-unknown-linux-gnu
Host CPU: skylake-avx512
```
Reviewed By: dyung, jhenderson
Differential Revision: https://reviews.llvm.org/D85624
D83530 removed --inlining={true,false} which were used by old asan_symbolize.py script.
Add compatibility aliases so that old asan_symbolize.py and sanitizer
binaries can work with new llvm-symbolizer.
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D85228
for the advantage outlined by D83639 ([OptTable] Support grouped short options)
Some behavior changes:
* -i={0,false} is removed. Use --no-inlines instead.
* --demangle={0,false} is removed. Use --no-demangle instead
* -untag-addresses={0,false} is removed. Use --no-untag-addresses instead
Added a higher level API OptTable::parseArgs which handles optional
initial options populated from an environment variable, expands response
files recursively, and parses options.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83530
Summary: This implements searching for function symbols and public symbols by address.
More specifically,
-Implements NativeSession::findSymbolByAddress for function symbols and
public symbols. I think data symbols are also searched for, but isn't
implemented in this patch.
-Adds classes for NativeFunctionSymbol and NativePublicSymbol
-Adds a '-use-native-pdb-reader' option to llvm-symbolizer, for testing
purposes.
Reviewers: rnk, amccarth, labath
Subscribers: mgorny, hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79269
Summary:
This matches the behavior of GNU addr2line. We previously treated
hexadecimal addresses as binary if they started with 0b, otherwise as
octal if they started with 0, otherwise as decimal.
This only affects llvm-addr2line; the behavior of llvm-symbolize is
unaffected.
Reviewers: ikudrin, rupprecht, jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73306
Summary:
1. FileLineInfoSpecifier::Default isn't the default for anything.
Rename to RawValue, which accurately reflects its role.
2. Most functions that take a part of a FileLineInfoSpecifier end up
constructing a full one later or plumb two values through. Make them
all just take a complete FileLineInfoSpecifier.
3. Printing basenames only was handled differently from all other
variants, make it parallel to all the other variants.
Reviewers: jhenderson
Subscribers: hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76394
llvm-symbolizer is used by sanitizers to symbolize errors discovered by
sanitizer, but there's no way to pass options to llvm-symbolizer since
the tool is invoked directly by the sanitizer runtime. Therefore, we
don't have a way to pass options needed to find debug symbols such as
-dsym-hint or -debug-file-directory. This change enables reading options
from the LLVM_SYMBOLIZER_OPTS in addition to command line which can be
used to pass those additional options to llvm-symbolizer invocations
made by sanitizer runtime.
Differential Revision: https://reviews.llvm.org/D71668
Build ID is a protocol for looking up debug files that's already
supported by various tools including debuggers. For example, when
locating debug files, gdb would check the following directories:
- /usr/lib/debug/.build-id/ab/cdef1234.debug
- /usr/bin/ls.debug
- /usr/bin/.debug/ls.debug
- /usr/lib/debug/usr/bin/ls.debug
llvm-symbolizer currently consults all of these except for build ID
based one. This patch implements support for build ID lookup. The
set of debug directories to search is specified by the new option:
--debug-file-directory, whose name matches the debug-file-directory
variable used by gdb for the same purpose.
Differential Revision: https://reviews.llvm.org/D70759
Any addresses that we pass to llvm-symbolizer are going to be untagged,
while any HWASAN instrumented globals are going to be tagged in the
symbol table. Therefore we need to untag the addresses before using them.
Differential Revision: https://reviews.llvm.org/D65769
llvm-svn: 367926
This command prints a description of the referenced function's stack frame.
For each formal parameter and local variable, the tool prints:
- function name
- variable name
- file/line of declaration
- FP-relative variable location (if available)
- size in bytes
- HWASAN tag offset
This information will be used by the HWASAN runtime to identify local
variables in UAR reports.
Differential Revision: https://reviews.llvm.org/D63468
llvm-svn: 364225
Many LLVM-based tools already support response files (i.e. files
containing a list of options, specified with '@'). This change simply
updates the documentation and help text for some of these tools to
include it. I haven't attempted to fix all tools, just a selection that
I am interested in.
I've taken the opportunity to add some tests for --help behaviour, where
they were missing. We could expand these tests, but I don't think that's
within scope of this patch.
This fixes https://bugs.llvm.org/show_bug.cgi?id=42233 and
https://bugs.llvm.org/show_bug.cgi?id=42236.
Reviewed by: grimar, MaskRay, jkorous
Differential Revision: https://reviews.llvm.org/D63597
llvm-svn: 364036
This makes the interface simpler and more consistent with the interface for
.dSYM files and fixes a bug where llvm-symbolizer would not read the dwp if
it was asked to symbolize data before symbolizing code.
Differential Revision: https://reviews.llvm.org/D63114
llvm-svn: 363025
One way of using llvm-symbolizer is to interactively within a process
write a line from a parent process to llvm-symbolizer's stdin, and then
read the output, then write the next line, read, etc. This worked as
long as all the lines were good. However, this didn't work prior to this
patch if any of the inputs were bad inputs, because the output is not
flushed after a bad input, meaning the parent process is sat waiting for
output, whilst llvm-symbolizer is sat waiting for input. This patch
flushes the output after every invocation of symbolizeInput when reading
from stdin. It also removes unnecessary flushing when llvm-symbolizer is
not reading addresses from stdin, which should give a slight performance
boost in these situations.
Reviewed by: ikudrin
Differential Revision: https://reviews.llvm.org/D62371
llvm-svn: 362511
This adds an alias for llvm-symbolizer with different defaults so that
it can be used as a drop-in replacement for GNU's addr2line.
If a substring "addr2line" is found in the tool's name:
* it defaults "-i", "-f" and "-C" to OFF;
* it uses "--output-style=GNU" by default.
Differential Revision: https://reviews.llvm.org/D60067
llvm-svn: 358749
With the latest changes, the option gets useful for users of
llvm-symbolizer, not only for the upcoming llvm-addr2line.
Differential Revision: https://reviews.llvm.org/D60816
llvm-svn: 358748
This patch addresses two differences in the output of llvm-symbolizer
and GNU's addr2line:
* llvm-symbolizer prints an empty line after the report for an address.
* With "-f -i=0", llvm-symbolizer replaces the name of an inlined
function with the name from the symbol table, i. e., the top caller
function in the inlining chain. addr2line preserves the name of the
inlined function.
Differential Revision: https://reviews.llvm.org/D60770
llvm-svn: 358747
addr2line allows -e to be grouped with other options; it also allows it
to prefix the value. Thus, all the following usages are possible:
* addr2line -f -e <bin> <addr>
* addr2line -fe <bin> <addr>
* addr2line -f e<bin> <addr>
* addr2line -fe<bin> <addr>
This patch adds the same for llvm-symbolizer.
Differential Revision: https://reviews.llvm.org/D60196
llvm-svn: 357676
In general, llvm-symbolizer follows the output style of GNU's addr2line.
However, there are still some differences; in particular, for a requested
address, llvm-symbolizer prints line and column, while addr2line prints
only the line number.
This patch adds a new switch to select the preferred style.
Differential Revision: https://reviews.llvm.org/D60190
llvm-svn: 357675
[Symbolizer] Add getModuleSectionIndexForAddress() helper routine
The https://reviews.llvm.org/D58194 patch changed symbolizer interface.
Particularily it requires not only Address but SectionIndex also.
Note object::SectionedAddress parameter:
Expected<DILineInfo> symbolizeCode(const std::string &ModuleName,
object::SectionedAddress ModuleOffset,
StringRef DWPName = "");
There are callers of symbolizer which do not know particular section index.
That patch creates getModuleSectionIndexForAddress() routine which
will detect section index for the specified address. Thus if caller
set ModuleOffset.SectionIndex into object::SectionedAddress::UndefSection
state then symbolizer would detect section index using
getModuleSectionIndexForAddress routine.
Differential Revision: https://reviews.llvm.org/D58848
llvm-svn: 356829
That patch is the fix for https://bugs.llvm.org/show_bug.cgi?id=40703
"wrong line number info for obj file compiled with -ffunction-sections"
bug. The problem happened with only .o files. If object file contains
several .text sections then line number information showed incorrectly.
The reason for this is that DwarfLineTable could not detect section which
corresponds to specified address(because address is the local to the
section). And as the result it could not select proper sequence in the
line table. The fix is to pass SectionIndex with the address. So that it
would be possible to differentiate addresses from various sections. With
this fix llvm-objdump shows correct line numbers for disassembled code.
Differential review: https://reviews.llvm.org/D58194
llvm-svn: 354972
Summary:
rL189250 added a realpath call, and rL352916 because realpath breaks assumptions with some build systems. However, the /usr/lib/debug case has been clarified, falling back to /usr/lib/debug is currently broken if the obj passed in is a relative path. Adding a call to use absolute paths when falling back to /usr/lib/debug fixes that while still not making any realpath assumptions.
This also adds a --fallback-debug-path command line flag for testing (since we probably can't write to /usr/lib/debug from buildbot environments), but was also verified manually:
```
$ rm -f path/to/dwarfdump-test.elf-x86-64
$ strace llvm-symbolizer --obj=relative/path/to/dwarfdump-test.elf-x86-64.debuglink 0x40113f |& grep dwarfdump
```
Lookups went to relative/path/to/dwarfdump-test.elf-x86-64, relative/path/to/.debug/dwarfdump-test.elf-x86-64, and then finally /usr/lib/debug/absolute/path/to/dwarfdump-test.elf-x86-64.
Reviewers: dblaikie, samsonov
Reviewed By: dblaikie
Subscribers: krytarowski, aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57916
llvm-svn: 353730
In order to make an option value truly optional, both the ValueOptional
attribute and an empty-named value are required. Prior to this change,
this empty-named value appears in the command-line help text:
-some-option - some help text
=v1 - description 1
=v2 - description 2
= -
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
-some-option - some help text
-some-option=<value> - some help text
=v1 - description 1
=v2 - description 2
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
-some-option=<value> - some help text
=v1 - description 1
=v2
=<empty> - description
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
This is mostly a reland of r353048 which in turn was a reland of
r352750.
Reviewed by: ruiu, thopre, mstorsjo
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 353053
In order to make an option value truly optional, both the ValueOptional
attribute and an empty-named value are required. Prior to this change,
this empty-named value appears in the command-line help text:
-some-option - some help text
=v1 - description 1
=v2 - description 2
= -
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
-some-option - some help text
-some-option=<value> - some help text
=v1 - description 1
=v2 - description 2
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
-some-option=<value> - some help text
=v1 - description 1
=v2
=<empty> - description
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
This is mostly a reland of r352750.
Reviewed by: ruiu, thopre, mstorsjo
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 353048
In order to make an option value truly optional, both the ValueOptional
and an empty-named value are required. This empty-named value appears in
the command-line help text, which is not ideal.
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
Reviewed by: thopre, ruiu
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 352750
If a stack trace or similar has a list of addresses from an executable
or DSO loaded at a variable address (e.g. due to ASLR), the addresses
will not directly correspond to the addresses stored in the object file.
If a user wishes to use llvm-symbolizer, they have to subtract the load
address from every address. This is somewhat inconvenient, especially as
the output of --print-address will result in the adjusted address being
listed, rather than the address coming from the stack trace, making it
harder to map results between the two.
This change adds a new switch to llvm-symbolizer --adjust-vma which
takes an offset, which is then used to automatically do this
calculation. The printed address remains the input address (allowing for
easy mapping), whilst the specified offset is applied to the addresses
when performing the lookup.
The switch is conceptually similar to llvm-objdump's new switch of the
same name (see D57051), which in turn mirrors a GNU switch. There is no
equivalent switch in addr2line.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D57151
llvm-svn: 352195
This change adds two options, -i and -inlines as aliases for the -inlining option to llvm-symbolizer to improve compatibility with the GNU addr2line utility which accepts these options.
It also modifies existing tests that use -inlining to exercise these new aliases as well.
This fixes PR40073.
Reviewed by: jhenderson, Quolyk, ruiu
Differential Revision: https://reviews.llvm.org/D57083
llvm-svn: 351999
This fixes https://bugs.llvm.org/show_bug.cgi?id=40072.
GNU addr2line's --functions switch is off by default, has a short alias
of -f, and does not take an argument. This patch changes llvm-symbolizer
to allow the second and third point (changing the default behaviour may
have negative impacts on users). If the option is missing a value, it
now treats it as "linkage".
This change does cause one previously valid command-line to behave
differently. Before --functions <value> was accepted, but now only
--functions=<value> is allowed (as well as --functions). The old
behaviour will result in the value being treated as a positional
argument.
The previous testing for --functions=short has been pulled out into a
new test that also tests the other accepted values and option formats.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D57049
llvm-svn: 351968
Georgii Rymar