This patch threads an lldb::DescriptionLevel through the typesystem to
allow dumping the full Clang AST (level=verbose) of any lldb::Type in
addition to the human-readable source description (default
level=full). This type dumping interface is currently not exposed
through the SBAPI.
The application is to let lldb-test dump the clang AST of search
results. I need this to test lazy type completion of clang types in
subsequent patches.
Differential Revision: https://reviews.llvm.org/D78329
The SIP debugserver was calling in attach_failed_due_to_sip
haven't worked for a while; remove them. To check this
properly we'd need debugsever to call out to codesign(1) to
inspect the entitlements, or the equivalant API,
and I'm not interested in adding that at this point. SIP
is has been the default on macOS for a couple of releases
and it's expected behavior now.
<rdar://problem/59198052>
Summary:
When using source maps for a breakpoint, in order to find the actual source that breakpoint has resolved, we
need to use a query similar to what CommandObjectSource::DumpLinesInSymbolContexts does, which is the logic
used by the CLI to display the source line at a given breakpoint. That's necessary because from a breakpoint
location you only have an address, which points to the original source location, not the source mapped one.
in the setBreakpoints request handler, we haven't been doing such query and we were returning the original
source location, which was breaking the UX of VSCode, as many breakpoints were being set but not displayed
in the source file next to each line. Besides, clicking the source path of a breakpoint in the breakpoints
view in the debug tab was not working for this case, as VSCode was trying to open a non-existent file, thus
showing an error to the user.
Ideally, we should do the query mentioned above to find the actual source location to respond to the IDE,
however, that query is expensive and users can have an arbitrary number of breakpoints set. As a simpler fix,
the request sent by VSCode already contains the full source path, which exists because the user set it from
the IDE itself, so we can simply reuse it instead of querying from the SB API.
I wrote a test for this, and found out that I had to move SetSourceMapFromArguments after RunInitCommands in
lldb-vscode.cpp, because an init command used in all tests is `settings clear -all`, which would clear the
source map unless specified after initCommands. And in any case, I think it makes sense to have initCommands
run before anything the debugger would do.
Reviewers: clayborg, kusmour, labath, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76968
Summary:
@labath mentioned to me that test files shouldn't have a license header.
I saw this one some days ago, so I'm doing some cleaning.
Reviewers: labath, clayborg
Subscribers: lldb-commits, labath
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D77328
Summary: The IDE has no packets that are sent to lldb-vscode that say which thread and frame are selected. The only way we know is we get a request for variables for a stack frame via a "scopes" request. When we receive this packet we make that thread and frame the selected thread and frame in lldb. This way when people execute lldb commands in the debug console by prefixing the expression with the backtick character, we will have the right thread and frame selected. Previously this was not updated as new stack frames were selected.
Reviewers: labath, aadsm, wallace, JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D77347
* This is a reattempted commit due to a previous builtbot failure
- Now using a env var to determine whether to run the test, as
someone might have built liblldbIntelFeatures.so without intelPT
support, which would make this test fail.
Summary:
Depends on D76872.
There was no test for the Intel PT support on LLDB, so I'm creating one, which
will help making progress on solid grounds.
The test is skipped if the Intel PT plugin library is not built.
Reviewers: clayborg, labath, kusmour, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D77107
Summary:
Depends on D76872.
There was no test for the Intel PT support on LLDB, so I'm creating one, which
will help making progress on solid grounds.
The test is skipped if the Intel PT plugin library is not built.
Reviewers: clayborg, labath, kusmour, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D77107
Summary:
Depends on D76872.
There was no test for the Intel PT support on LLDB, so I'm creating one, which
will help making progress on solid grounds.
The test is skipped if the Intel PT plugin library is not built.
Reviewers: clayborg, labath, kusmour, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D77107
Summary:
//reviews.llvm.org/D33035 added in 2017 basic support for intel-pt. I
plan to improve it and use it to support reverse debugging.
I fixed a couple of issues and now this plugin works again:
1. pythonlib needed to be linked against it for the SB framework.
Linking was failing because of this
2. the decoding functionality was broken because it lacked handling for
instruction events. It seems old versions of libipt, the actual decoding
library, didn't require these, but modern version require it (you can
read more here
https://github.com/intel/libipt/blob/master/doc/howto_libipt.md). These
events signal overflows of the internal PT buffer in the CPU,
enable/disable events of tracing, async cpu events, interrupts, etc.
I ended up refactoring a little bit the code to reduce code duplication.
In another diff I'll implement some basic tests.
This is a simple execution of the library:
(lldb) target create "/data/users/wallace/rr-project/a.out"
Current executable set to '/data/users/wallace/rr-project/a.out' (x86_64).
(lldb) plugin load liblldbIntelFeatures.so
(lldb) b main
Breakpoint 1: where = a.out`main + 8 at test.cpp:10, address = 0x00000000004007fa
(lldb) b test.cpp:14
Breakpoint 2: where = a.out`main + 50 at test.cpp:14, address = 0x0000000000400824
(lldb) r
Process 902754 stopped
* thread #1, name = 'a.out', stop reason = breakpoint 1.1
frame #0: 0x00000000004007fa a.out`main at test.cpp:10
7 }
8
9 int main() {
-> 10 int z = 0;
11 for(int i = 0; i < 10000; i++)
12 z += fun(z);
13
Process 902754 launched: '/data/users/wallace/rr-project/a.out' (x86_64)
(lldb) processor-trace start all
(lldb) c
Process 902754 resuming
Process 902754 stopped
* thread #1, name = 'a.out', stop reason = breakpoint 2.1
frame #0: 0x0000000000400824 a.out`main at test.cpp:14
11 for(int i = 0; i < 10000; i++)
12 z += fun(z);
13
-> 14 cout << z<< endl;
15 return 0;
16 }
(lldb) processor-trace show-instr-log
thread #1: tid=902754
0x7ffff72299b9 <+9>: addq $0x8, %rsp
0x7ffff72299bd <+13>: retq
0x4007ed <+16>: addl $0x1, %eax
0x4007f0 <+19>: leave
0x4007f1 <+20>: retq
0x400814 <+34>: addl %eax, -0x4(%rbp)
0x400817 <+37>: addl $0x1, -0x8(%rbp)
0x40081b <+41>: cmpl $0x270f, -0x8(%rbp) ; imm = 0x270F
0x400822 <+48>: jle 0x40080a ; <+24> at test.cpp:12
0x400822 <+48>: jle 0x40080a ; <+24> at test.cpp:12
```
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76872
Summary:
The DAP specifies the following for the SetBreakpoints request:
The breakpoints returned are in the same order as the elements of the 'breakpoints' arguments
This was not followed, as lldb-vscode was returning the breakpoints in a different order, because they were first stored into a map, and then traversed. Of course, maps normally don't preserve ordering.
See this log I captured:
-->
{"command":"setBreakpoints",
"arguments":{
"source":{
"name":"main.cpp",
"path":"/Users/wallace/fbsource/xplat/sand/test-projects/buck-cpp/main.cpp"
},
"lines":[6,10,11],
"breakpoints":[{"line":6},{"line":10},{"line":11}],
"sourceModified":false
},
"type":"request",
"seq":3
}
<--
{"body":{
"breakpoints":[
{"id":1, "line":11,"source":{"name":"main.cpp","path":"xplat/sand/test-projects/buck-cpp/main.cpp"},"verified":true},
{"id":2,"line":6,"source":{"name":"main.cpp","path":"xplat/sand/test-projects/buck-cpp/main.cpp"},"verified":true},
{"id":3,"line":10,"source":{"name":"main.cpp","path":"xplat/sand/test-projects/buck-cpp/main.cpp"},"verified":true}]},
"command":"setBreakpoints",
"request_seq":3,
"seq":0,
"success":true,
"type":"response"
}
As you can see, the order was not respected. This was causing the IDE not to be able to disable/enable breakpoints by clicking on them in the breakpoint view in the lower corner of the Debug tab.
This diff fixes the ordering problem. The traversal + querying was done very fast in O(nlogn) time. I'm keeping the same complexity.
I also updated a couple of tests to account for the ordering.
Reviewers: clayborg, aadsm, kusmour, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76891
Those fields inside of the global variable can be local variables because
they are used in only inside of one function: request_launch for launch_info
and request_attach for attach_info.
To avoid confusion an already existing local variable attach_info of
request_attach has been renamed to better reflect its purpose.
Differential Revision: https://reviews.llvm.org/D76593
Summary:
If no custom launching is used, lldb-vscode launches a program with an empty environment by default. In some scenarios, the user might want to simply use the same environment as the IDE to have a set of working environment variables (e.g. PATH wouldn't be empty). In fact, most DAPs in VSCode have this behavior by default. In other cases the user definitely needs to set their custom environment, which is already supported. To make the first case easier for the user (e.g. not having to copy the PATH to the launch.json every time they want to debug simple programs that rely on PATH), a new option is now offered. inheritEnvironment will launch the program copying its own environment, and it's just a boolean flag.
{F11347695}
Reviewers: clayborg, aadsm, diazhector98, kusmour
Subscribers: labath, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74636
Summary:
https://reviews.llvm.org/D65363 introduced the launchCommands argument. However, it did not add
a corresponding definition in the package.json
Reviewers: clayborg, labath, kusmour, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76529
Summary:
On Linux, when executing lldb-vscode on a remote machine, lldb-vscode doesn't die after the debug session ends. It keeps trying to read JSON input to no avail.
This diff indicates lldb-vscode to stop reading after a termination event has been processed.
Reviewers: clayborg, aadsm, kusmour
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76314
If LLDB attaches to an already running target, then structure SBAttachInfo is
used instead of SBLaunchInfo. lldb-vscode function request_attach sets some
values to g_vsc.launch_info, however this field is then not passed anywhere, so
this action has no effect. This commit removes invocation of
SBLaunchInfo::SetDetachOnError, which has no equivalent in SBAttachInfo.
File package.json doesn't describe detachOnError property for "attach" request
type, therefore it is not needed to update it.
Differential Revision: https://reviews.llvm.org/D76351
Summary:
Compiling ObjC++ with Clang modules is usually not working well and compiling
the small debugserver with modules is not worth the trouble.
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Subscribers: mgorny, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74891
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
(Patch re-applied with bugfix this time).
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
(Patch re-applied without modifications, the bot failure was unrelated).
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
The debugserver profile thread used to suspend itself between samples with
a usleep. When you detach or kill, MachProcess::Clear would delay replying
to the incoming packet until pthread_join of the profile thread returned.
If you are unlucky or the suspend delay is long, it could take longer than
the packet timeout for pthread_join to return. Then you would get an error
about detach not succeeding from lldb - even though in fact the detach was
successful...
I replaced the usleep with PThreadEvents entity. Then we just call a timed
WaitForEventBits, and when debugserver wants to stop the profile thread, it
can set the event bit, and the sleep will exit immediately.
Differential Revision: https://reviews.llvm.org/D75004
Seems like this code raised some alarm bells as it looks like an ArrayRef
to a temporary initializer list, but it's actually just calling the ArrayRef(T*, T*)
constructor. Let's clarify this and directly call the right ArrayRef constructor here.
Fixes rdar://problem/59176052
This change will bring lldb-vscode in line with how several other llvm
tools process command line arguments and make it easier to add future
options.
Differential revision: https://reviews.llvm.org/D74798
This patch changes the way we initialize and terminate the plugins in
the system initializer. It uses an approach similar to LLVM's
TARGETS_TO_BUILD with a def file that enumerates the plugins.
Previous attempts to land this failed on the Windows bot because there's
a dependency between the different process plugins. Apparently
ProcessWindowsCommon needs to be initialized after all other process
plugins but before ProcessGDBRemote.
Differential revision: https://reviews.llvm.org/D73067
The WASM and Hexagon plugin check the ArchType rather than the OSType,
so explicitly reject those in the DynamicLoaderStatic.
Differential revision: https://reviews.llvm.org/D74780
Generate the LLDB_PLUGIN_DECLARE macros with CMake and a def file. I'm
landing D73067 in pieces so I can bisect what exactly is breaking the
Windows bot.
Other plugins depend on DynamicLoaderDarwinKernel and which means we
cannot conditionally enable/build this plugin based on the target
platform. This means that it will be past of the list of plugins
initialized once that's autogenerated.
Summary:
All of our lookup APIs either use `CompilerDeclContext &` or `CompilerDeclContext *` semi-randomly it seems.
This leads to us constantly converting between those two types (and doing nullptr checks when going from
pointer to reference). It also leads to the confusing situation where we have two possible ways to express
that we don't have a CompilerDeclContex: either a nullptr or an invalid CompilerDeclContext (aka a default
constructed CompilerDeclContext).
This moves all APIs to use references and gets rid of all the nullptr checks and conversions.
Reviewers: labath, mib, shafik
Reviewed By: labath, shafik
Subscribers: shafik, arphaman, abidh, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74607
LLDB has a few different styles of header guards and they're not very
consistent because things get moved around or copy/pasted. This patch
unifies the header guards across LLDB and converts everything to match
LLVM's style.
Differential revision: https://reviews.llvm.org/D74743
Use LLDB_PLUGIN_DEFINE_ADV to make the name of the generated initializer
match the name of the plugin. This is a step towards generating the
initializers with a def file. I'm landing this change in pieces so I can
narrow down what exactly breaks the Windows bot.
This patch changes the way we initialize and terminate the plugins in
the system initializer. It uses an approach similar to LLVM's
TARGETS_TO_BUILD with a def file that enumerates the plugins.
The previously landed patch got reverted because it was lacking:
(1) A plugin definition for the Objective-C language runtime,
(2) The dependency between the Static and WASM dynamic loader,
(3) Explicit initialization of ScriptInterpreterNone for lldb-test.
All issues have been addressed in this patch.
Differential revision: https://reviews.llvm.org/D73067
This patch changes the way we initialize and terminate the plugins in
the system initializer. It uses an approach similar to LLVM's
TARGETS_TO_BUILD with a def file that enumerates the plugins.
Differential revision: https://reviews.llvm.org/D73067
After the recent change that grouped some of the ABI plugins together,
those plugins ended up with multiple initializers per plugin. This is
incompatible with my proposed approach of generating the initializers
dynamically, which is why I've grouped them together in a new entry
point.
Differential revision: https://reviews.llvm.org/D74451
Summary:
This patch fixes logging to log incoming packets which was removed during a refactor.
We also enable logging to a "vscode.txt" file for each lldb-vscode test by creating the log file in the build artifacts directory for each test. This allows users to see the packets for their tests if needed and the log file is in a directory that will be removed after tests have been run.
Reviewers: labath, aadsm, serhiy.redko, jankratochvil, xiaobai, wallace
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74566
This commit fixes an issue with lldb-vscode failing to run programs that
use different architecture/platform than the "empty" in the target.
Original implementation was creating a default target without specifying
the target architecture, platform or program, and then would set
executable file through SBLaunchInfo, assuming that this would update
architecture and platform accordingly. However this wasn't really
happening, and architecture and platform would remain at whatever values
were in the "empty" target. The simple solution is to create target
already for a desired architecture and platform.
Function request_attach is updated in a similar fashion.
This commit also adds new JSON properties to "launch" and "attach"
packets to allow user to override desired platform and architecture.
This might be especially important for cases where information in ELF is
not enough to derive those values correctly.
New code has a behavior similar to LLDB MI [1], where typically IDE would
specify target file with -file-exec-and-symbols, and then only do -exec-run
command that would launch the process. In lldb-vscode those two actions are
merged into one request_launch function. Similarly in the interpreter
session, user would first do "file" command, then "process launch"
Differential Revision: https://reviews.llvm.org/D70847
Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Summary: The VS Code DAP expects on response for each breakpoint that was requested. If we responsd with multiple entries for one breakpoint the VS Code UI gets out of date. Currently the VS code DAP doesn't handle one breakpoint with multiple locations. If this ever gets fixed we can modify our code.
Reviewers: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73665
Move the logic for initialization and termination for DynamicLoaderMacOS
into DynamicLoaderMacOSXDYLD so that there's one initializer for the
DynamicLoaderMacOSXDYLD plugin.
Move the logic for initialization and termination for
SymbolFileDWARFDebugMap into SymbolFileDWARF so that there's one
initializer for the SymbolFileDWARF plugin.
StringRef will call strlen on the C string which is inefficient (as ConstString already
knows the string lenght and so does StringRef). This patch replaces all those calls
with GetStringRef() which doesn't recompute the length.
Look up the -arch flags to pass to the mig invocation from an
optionally-defined MIG_ARCHS variable. We can't use CMAKE_OSX_ARCHS
because the {i,tv,watch}OS builds don't use this mechanism to achieve
fat builds (they build each slice separately & then lipo them together).
This supercedes the mig -arch/-isysroot fix from
510758dae2.
Apparently Linux and Windows have the exact opposite behavior when it
comes to inline declarations of external functions. On Linux they're
considered to be part of the lldb_private namespace, while on Windows
they're considered to be part of the top level namespace. Somehow on
macOS, it doesn't really matter and both are fine...
At this point I don't know what to do, so I'm just adding the
LLDB_PLUGIN_DECLARE macros again as originally proposed in D74245.
Summary: This option is not used anymore and has been replaced by the env var LLDBVSCODE_LOG.
Reviewers: clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74266
Summary:
Completion requests are causing some problems in the debugger, which is explained in the comment in the code.
I'm disabling it for now until we have time to do a good implementation of it.
Reviewers: clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74264
This is a step towards making the initialize and terminate calls be
generated by CMake, which in turn is towards making it possible to
disable plugins at configuration time.
Differential revision: https://reviews.llvm.org/D74245
Summary:
There's a fair amount of code duplication between the different ABI plugins for
the same architecture (e.g. ABIMacOSX_arm & ABISysV_arm). Deduplicating this
code is not very easy at the moment because there is no good place where to put
the common code.
Instead of creating more plugins, this patch reduces their number by grouping
similar plugins into a single folder/plugin. This makes it easy to extract
common code to a (e.g.) base class, which can then live in the same folder.
The grouping is done based on the underlying llvm target for that architecture,
because the plugins already require this for their operation.
Reviewers: JDevlieghere, jasonmolenda, jfb
Subscribers: sdardis, nemanjai, mgorny, kristof.beyls, fedor.sergeev, kbarton, jrtc27, atanasyan, jsji, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74138
The developer mode check is now working.
Add another check for user id mismatch, e.g. a regular user
trying to attach to something running as root, and describe
the problem for the user.
This patch has a couple of outstanding issues. The test is not python3
compatible, and it also seems to fail with python2 (at least under some
circumstances) due to an overambitious assertion.
This reverts the patch as well as subsequent fixup attempts:
014ea93376,
f5f70d1c8f.
4697e701b8.
5c15e8e682.
3ec28da6d6.
Explicitly check for a request to attach to a pid that doesn't
exist, to attach to a pid that is already being debugged, unify the
SIP process check, and an attempt at checking if developer mode is
enabled on the system (which isn't working in debugserver, for some
reason; I can't get the authorization record which should be an
unprivileged operation and works in a standalone program I wrote).
I'll debug the developer mode check later, but I wanted to land it
along with everything else; right now it will claim that developer
mode is always enabled so it's harmless to include as-is.
The reproducer instrumentation cannot automatically serialize and
deserialize void* arguments. Currently we deal with this by explicitly
preventing these methods from being instrumented. This has the undesired
side effect of breaking replay when that method returns a value later
used by another SB API call.
The solution is to change our approach and instrument these methods.
Instead of using the DUMMY macro, we just make (de)serialization of the
void pointer a NOOP and always return a nullptr.
Summary:
This change represents the move of ClangASTImporter, ClangASTMetadata,
ClangExternalASTSourceCallbacks, ClangUtil, CxxModuleHandler, and
TypeSystemClang from lldbSource to lldbPluginExpressionParserClang.h
This explicitly removes knowledge of clang internals from lldbSymbol,
moving towards a more generic core implementation of lldb.
Reviewers: JDevlieghere, davide, aprantl, teemperor, clayborg, labath, jingham, shafik
Subscribers: emaste, mgorny, arphaman, jfb, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73661
Summary:
There was a bug on LLDB VSCode where there was the following behavior:
//Code
```
struct foo {
int bar:
};
...
foo my_foo = {10};
```
Trying to auto-complete my_foo.b with my_foo.bar resulted instead with my_foo.my_foo.bar
This diff fixes this bug and adds some tests to check correct behavior.
It also fixes the same bug using the arrow operator (->) when user manually requests completions.
TODO: Fix bug where no recommended completions are automatically shown with arrow operator
{F11249959}
{F11249958}
Reviewers: wallace
Reviewed By: wallace
Subscribers: teemperor, labath, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73506
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Unify the interface for enabling and disabling breakpoints with their
watchpoint counterpart. This allows both to go through
DoHardwareBreakpointAction.
Differential revision: https://reviews.llvm.org/D72981
Summary:
This commit renames ClangASTContext to TypeSystemClang to better reflect what this class is actually supposed to do
(implement the TypeSystem interface for Clang). It also gets rid of the very confusing situation that we have both a
`clang::ASTContext` and a `ClangASTContext` in clang (which sometimes causes Clang people to think I'm fiddling
with Clang's ASTContext when I'm actually just doing LLDB work).
I also have plans to potentially have multiple clang::ASTContext instances associated with one ClangASTContext so
the ASTContext naming will then become even more confusing to people.
Reviewers: #lldb, aprantl, shafik, clayborg, labath, JDevlieghere, davide, espindola, jdoerfert, xiaobai
Reviewed By: clayborg, labath, xiaobai
Subscribers: wuzish, emaste, nemanjai, mgorny, kbarton, MaskRay, arphaman, jfb, usaxena95, jingham, xiaobai, abidh, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D72684
AppleObjCRuntime is the main entry point to the plugin with the same
name. This is part of a greater refactoring to auto generate the
initializers. NFC.
Differential revision: https://reviews.llvm.org/D73121
When launching an inferior in a new terminal window via AppleScript
and the darwin-debug helper program, we could often end up with the
inferior process having a too-high suspend count, and it would never
resume execution.
lldb tries to wait until darwin-debug has finished its work and has
launched the inferior (WaitForProcessToSIGSTOP) but this wasn't
working correctly - and cannot be made to work.
This patch removes WaitForProcessToSIGSTOP, adds a special tiny
segment to the darwin-debug executable so it can be identified as
that binary (ExecExtraSuspend), and adds code to debugserver to
detect this segment. When debugserver sees this segment, it notes
that the next exec will be done with a launch-suspended flag. When
the next exec happens, debugserver forces an extra task_resume when
we resume the inferior.
An alternative approach would be if lldb could detect when the
inferior has been launched by darwin-debug unambiguously; monitoring
when the unix socket between darwin-debug and lldb was closed would
have been a reasonable way to do this too.
<rdar://problem/29760580>
Differential Revision: https://reviews.llvm.org/D72963
This extract the common functionality of enabling and disabling hardware
watchpoints into a single function.
Differential revision: https://reviews.llvm.org/D72971
These files should do the more or less the same initialize/terminate calls in the
same order. This just reverts all the differences that have piled up over time
in the SystemInitializerTest that people keep forgetting about.
Add a flag which always generates a reproducer when normally it would be
discarded. This is meant for testing purposes to capture a debugger
session without modification the session itself.
Summary:
This is the first in a series of patches to enable LLDB debugging of
WebAssembly targets.
Current versions of Clang emit (partial) DWARF debug information in WebAssembly
modules and we can leverage this debug information to give LLDB the ability to
do source-level debugging of Wasm code that runs in a WebAssembly engine.
A way to do this could be to use the remote debugging functionalities provided
by LLDB via the GDB-remote protocol. Remote debugging can indeed be useful not
only to connect a debugger to a process running on a remote machine, but also to
connect the debugger to a managed VM or script engine that runs locally,
provided that the engine implements a GDB-remote stub that offers the ability to
access the engine runtime internal state.
To make this work, the GDB-remote protocol would need to be extended with a few
Wasm-specific custom query commands, used to access aspects of the Wasm engine
state (like the Wasm memory, Wasm local and global variables, and so on).
Furthermore, the DWARF format would need to be enriched with a few Wasm-specific
extensions, here detailed: https://yurydelendik.github.io/webassembly-dwarf.
This CL introduce classes **ObjectFileWasm**, a file plugin to represent a Wasm
module loaded in a debuggee process. It knows how to parse Wasm modules and
store the Code section and the DWARF-specific sections.
Reviewers: jasonmolenda, clayborg, labath
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71575
In the documentation of `include_directories`, it notes that
`target_include_directories` is preferred because it affects
specific targets intead of propagating include search paths
to the entire project.
No files in lldb-server are including a header from a plugin without the
whole path to the header relative to the lldb source directory. There is
no need to include the specific directories as a result.
When lldb requests an app launch through FrontBoard/BackBoard,
we get back an NSError object if there was a problem with an
integer error code and a descriptive text string. debugserver
would log the descriptive text string to the console, but it
would only save the error code value, ask for the
much-less-specific name of that error code, and send that very
generic error word back to lldb.
This patch saves the longer description of the failure when
available, and sends that to lldb. If unavailable, it falls
back to sending up the generic description of the error code
as it was doing before.
This only impacts the iOS on-device debugserver.
<rdar://problem/49953304>
Summary: There are a few places in LLDB where we do a `reinterpret_cast` for conversions that we could also do with `static_cast`. This patch moves all this code to `static_cast`.
Reviewers: shafik, JDevlieghere, labath
Reviewed By: labath
Subscribers: arphaman, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D72161
ClangASTContext::getASTContext() currently returns a ptr but we have an assert there since a
while that the ASTContext is not a nullptr. This causes that we still have a lot of code
that is doing nullptr checks on the result of getASTContext() which is all unreachable code.
This patch changes the return value to a reference to make it clear this can't be a nullptr
and deletes all the nullptr checks.
"The debug adapter supports the delayed loading of parts of the stack,
which requires that both the 'startFrame' and 'levels' arguments and the
'totalFrames' result of the 'StackTrace' request are supported."
Lack of this field makes VSCode incorrectly display stack traces information
D71034
The changes are minor; primarily debugserver needs to go through
accessor functions/macros when changing pc/fp/sp/lr, and debugserver
needs to clear any existing pointer auth bits from values in two
cases. debugserver can fetch the number of bits used for addressing
from a sysctl, and will include that in the qHostInfo reply. Update
qHostInfo documentation to document it.
To ensure a reproducer works correctly, the version of LLDB used for
capture and replay must match. Right now the reproducer already contains
the LLDB version. However, this is purely informative. LLDB will happily
replay a reproducer generated with a different version of LLDB, which
can cause subtle differences.
This patch adds a version check which compares the current LLDB version
with the one in the reproducer. If the version doesn't match, LLDB will
refuse to replay. It also adds an escape hatch to make it possible to
still replay the reproducer without having to mess with the recorded
version. This might prove useful when you know two versions of LLDB
match, even though the version string doesn't. This behavior is
triggered by passing a new flag -reproducer-skip-version-check to the
lldb driver.
Differential revision: https://reviews.llvm.org/D70934
Summary:
CompileUnit is a complicated class. Having it be implicitly convertible
to a FileSpec makes reasoning about it even harder.
This patch replaces the inheritance by a simple member and an accessor
function. This avoid the need for casting in places where one needed to
force a CompileUnit to be treated as a FileSpec, and does not add much
verbosity elsewhere.
It also fixes a bug where we were wrongly comparing CompileUnit& and a
CompileUnit*, which compiled due to a combination of this inheritance
and the FileSpec*->FileSpec implicit constructor.
Reviewers: teemperor, JDevlieghere, jdoerfert
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70827
This is a correctness fix for the Clang DWARF parser that primarily
matters for swift-lldb's ability to import Clang types that were
reconstructed from DWARF into Swift.
rdar://problem/55025799
Differential Revision: https://reviews.llvm.org/D70580
Improve the message printed when LLDB crashes by asking the user to
replay the reproducer before attaching it to a bugreport..
********************
Crash reproducer for lldb version 10.0.0 (git@github.com:llvm/llvm-project.git revision ...)
clang revision ...
llvm revision ...
Reproducer written to '/path/to/reproducer'
Before attaching the reproducer to a bug report:
- Look at the directory to ensure you're willing to share its content.
- Make sure the reproducer works by replaying the reproducer.
Replay the reproducer with the following command:
./bin/lldb -replay /path/to/reproducer
********************
This patch replaces the existing out-of-date man page for lldb and
replaces it with an RST file from which sphinx generates the actual
troff file. This is similar to how man pages are generated for the rest
of the LLVM utilities.
The man page is generated by building the `docs-lldb-man` target.
Differential revision: https://reviews.llvm.org/D70514
This patch hooks the reproducer infrastructure with the signal handlers.
When lldb crashes with reproducers capture enabled, it will now generate
the reproducer and print a short message the standard out. This doesn't
affect the pretty stack traces, which are still printed before.
This patch also introduces a new reproducer sub-command that
intentionally raises a given signal to test the reproducer signal
handling.
Currently the signal handler is doing too much work. Instead of copying
over files into the reproducers in the signal handler, we should
re-invoke ourselves with a special command line flag that looks at the
VFS mapping and performs the copy.
This is a NO-OP when reproducers are disabled.
Differential revision: https://reviews.llvm.org/D70474
Use TARGET_TRIPLE instead of LLVM_DEFAULT_TARGET_TRIPLE, as the latter
isn't exported by LLVMConfig.cmake, which means arch detection fails if
lldb is built separately from llvm.
Allow clients of the llvm library to opt-in to one-shot SIGPIPE
handling, instead of forcing them to undo llvm's SIGPIPE handler
registration (which is brittle).
The current behavior is preserved for all llvm-derived tools (except
lldb) by means of a default-`true` flag in the InitLLVM constructor.
This prevents "IO error" crashes in long-lived processes (lldb is the
motivating example) which both a) load llvm as a dynamic library and b)
*really* need to ignore SIGPIPE.
As llvm signal handlers can be installed when calling into libclang
(say, via RemoveFileOnSignal), thereby overriding a previous SIG_IGN for
SIGPIPE, there is no clean way to opt-out of "exit-on-SIGPIPE" in the
current model.
Differential Revision: https://reviews.llvm.org/D70277
Summary:
The DAP has a completion request that has been unimplemented. It allows showing autocompletion tokens inside the Debug Console.
I implemented it in a very simple fashion mimicking what the user would see when autocompleting an expression inside the CLI.
There are two cases: normal variables and commands. The latter occurs when a text is prepepended with ` in the Debug Console.
These two cases work well and have tests.
Reviewers: clayborg, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D69873
I noticed that currently we are printing LLVM's pretty stack trace
twice. The reason is that we're calling PrintStackTraceOnErrorSignal in
addition to InitLLVM, which besides some other useful things, also
register LLVM's pretty stack trace handler.
Differential revision: https://reviews.llvm.org/D70216
This is basically the same bug as in r260434.
SymbolFileDWARF::FindTypes has exponential worst-case when digging
through dependency DAG of .pcm files because each object file and .pcm
file may depend on an already-visited .pcm file, which may again have
dependencies. Fixed here by carrying a set of already visited
SymbolFiles around.
rdar://problem/56993424
Differential Revision: https://reviews.llvm.org/D70106
When building standalone, `LLVM_DEFAULT_TARGET_TRIPLE` may be undefined.
Matching against an empty string does not work as desired in CMake, so,
fallback to the old behaviour, defaulting `LLDB_DEBUGSERVER_ARCH` to
`CMAKE_OSX_ARCHITECTURES`.
Summary: _setmode in assert will not run when build with NDEBUG
Reviewers: mstorsjo, labath, amccarth
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D69612
`LLVM_DEFAULT_TARGET_TRIPLE` is a cached variable, which means that it
may actually be unset. Furthermore, in standalone builds, the variable
may be fully undefined. Apply the regular expression over the empty
string in such a case. This should improve the state of the green
dragon bot.
The debugserver build needs to conditionally include files depending on the
target architecture.
Switch on the architecture specified by LLVM_DEFAULT_TARGET_TRIPLE, as
the llvm and swift build systems use this variable to identify the
target (the latter, indirectly, through LLVM_HOST_TRIPLE).
It would be possible to switch on CMAKE_OSX_ARCHITECTURES, but the swift
build does not provide it, preferring instead to pass arch-specific
CFLAGS etc explicitly. Switching on LLVM_HOST_TRIPLE is also an option,
but it breaks down when cross-compiling.
Differential Revision: https://reviews.llvm.org/D69523
Install llvm's signal handlers up front to prevent lldb's handlers from being
ignored. This is (hopefully) a stopgap workaround.
When lldb invokes an llvm API that installs signal handlers (e.g.
llvm::sys::RemoveFileOnSignal, possibly via a compiler embedded within lldb),
lldb's signal handlers are overriden if llvm is installing its handlers for the
first time.
To work around llvm's behavior, force it to install its handlers up front, and
*then* install lldb's handlers. In practice this is used to prevent lldb test
processes from exiting due to IO_ERR when SIGPIPE is received.
Note that when llvm installs its handlers, it 1) records the old handlers it
replaces and 2) re-installs the old handlers when its new handler is invoked.
That means that a signal not explicitly handled by lldb can fall back to being
handled by llvm's handler the first time it is received, and then by the
default handler the second time it is received.
Differential Revision: https://reviews.llvm.org/D69403
This reverts commit 32ce14e55e.
In post-commit review, Pavel pointed out that there's a simpler way to
ignore SIGPIPE in lldb that doesn't rely on llvm's handlers.
Occasionally, during test teardown, LLDB writes to a closed pipe.
Sometimes the communication is inherently unreliable, so LLDB tries to
avoid being killed due to SIGPIPE (it calls `signal(SIGPIPE, SIG_IGN)`).
However, LLVM's default SIGPIPE behavior overrides LLDB's, causing it to
exit with IO_ERR.
Opt LLDB out of the default SIGPIPE behavior. I expect that this will
resolve some LLDB test suite flakiness (tests randomly failing with
IO_ERR) that we've seen since r344372.
rdar://55750240
Differential Revision: https://reviews.llvm.org/D69148
llvm-svn: 375288
This patch removes the size_t return value and the append parameter
from the remainder of the Find.* functions in LLDB's internal API. As
in the previous patches, this is motivated by the fact that these
parameters aren't really used, and in the case of the append parameter
were frequently implemented incorrectly.
Differential Revision: https://reviews.llvm.org/D69119
llvm-svn: 375160
Summary:
Currently when invoking lldb-test symbols -dump-ast it parses all the debug symbols and calls print(...) on the TranslationUnitDecl.
While useful the TranslationUnitDecl::print(...) method gives us a higher level view then the dump from ASTDumper which is what we get when we invoke dump() on a specific AST node.
The main motivation for this change is allow us to verify that the AST nodes we create when we parse DWARF. For example in order to verify we are correctly using DIFlagExportSymbols added by D66667
Differential Revision: https://reviews.llvm.org/D67994
llvm-svn: 374570
This should allow lldb-server to operate on files with non-ascii
pathnames.
I tried looking around in lldb/tools, and this seemed like the only
other tool (other than the main lldb driver itself) that would be
used (implicitly) by an end user (which could be working in
non-ascii paths).
Differential Revision: https://reviews.llvm.org/D68864
llvm-svn: 374537
This avoids the currently MSVC specific codepath of using the
wchar entry point and converting that to utf8.
Differential Revision: https://reviews.llvm.org/D68770
llvm-svn: 374526
debugserver had been using an instruction that would work
for armv7 or aarch64 processes, but we don't have armv7 code
running on arm64 devices any more so this is unnecessary.
<rdar://problem/56133118>
llvm-svn: 374264
Link against clang-cpp dylib rather than split libs when
CLANG_LINK_CLANG_DYLIB is enabled.
Differential Revision: https://reviews.llvm.org/D68456
llvm-svn: 373734
Summary:
We mark debugserver_vers.c as a generated file in CMake. This means that when we run `ninja clean` we end up deleting that file,
but any following `ninja` invocation will fail due to the file missing. The file can't be generated as `ninja` doesn't know it has to
rerun CMake to create the file. Turns out that marking the output of configure_file as generated is wrong as explained in this bug report:
https://gitlab.kitware.com/cmake/cmake/issues/18032
This patch just removes that property. The only side effect of this seems to be that this file maybe shows up in your IDE when
opening our CMake project, but that seems like a small sacrifice.
This patch can be quickly tested by running `ninja clean ; ninja lldbDebugserverCommon`. Before this patch the build will fail
due to debugserver_vers.c missing.
Reviewers: JDevlieghere, labath
Reviewed By: labath
Subscribers: mgorny, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68376
llvm-svn: 373723
This patch replaces the LLDB's JSON implementation with the one from
LLVM in argdumper.
Differential revision: https://reviews.llvm.org/D68279
llvm-svn: 373361
I noticed that SymbolFileDWARFDebugMap::FindTypes was implementing it
incorrectly (passing append=false in a for-loop to recursive calls to
FindTypes would yield only the very last set of results), but instead
of fixing it, removing it seemed like an even better option.
rdar://problem/54412692
Differential Revision: https://reviews.llvm.org/D68171
llvm-svn: 373224
When not running under a TTY the output is buffered and not flushed
before debugserver exits which makes it impossible to parse the version
string. This adds a -V/--version command that just prints the version to
stdout and exits with an exit code zero.
Differential revision: https://reviews.llvm.org/D68156
llvm-svn: 373127
Summary:
`lldb-vscode` concatenates a string of sourceMap entries
specified in the config, but fails to put a space between
each entry, which causes the settings command to fail.
This patch adds a space between each mapping.
Patch by Richard Howell
Differential Revision: https://reviews.llvm.org/D67569
llvm-svn: 373016
This avoids having to define additional macros in the cmake file, and
and also makes the logic in the cpp files more compact. It is also
easily extendible to other plugin types (instruction emulation?) that
should only be initialized if the corresponding llvm target is built.
Thanks to Ilya Birukov for pointing me to this file.
llvm-svn: 372952
Summary:
I was recently surprised to learn that there is a total of 2 (two) users
of the register info definitions contained in the ABI plugins. Yet, the
defitions themselves span nearly 10kLOC.
The two users are:
- dwarf expression pretty printer
- the mechanism for augmenting the register info definitions obtained
over gdb-remote protocol (AugmentRegisterInfoViaABI)
Both of these uses need the DWARF an EH register numbers, which is
information that is already available in LLVM. This patch makes it
possible to do so.
It adds a GetMCRegisterInfo method to the ABI class, which every class
is expected to implement. Normally, it should be sufficient to obtain
the definitions from the appropriate llvm::Target object (for which I
provide a utility function), but the subclasses are free to construct it
in any way they deem fit.
We should be able to always get the MCRegisterInfo object from llvm,
with one important exception: if the relevant llvm target was disabled
at compile time. To handle this, I add a mechanism to disable the
compilation of ABI plugins based on the value of LLVM_TARGETS_TO_BUILD
cmake setting. This ensures all our existing are able to create their
MCRegisterInfo objects.
The new MCRegisterInfo api is not used yet, but the intention is to make
use of it in follow-up patches.
Reviewers: jasonmolenda, aprantl, JDevlieghere, tatyana-krasnukha
Subscribers: wuzish, nemanjai, mgorny, kbarton, atanasyan, lldb-commits
Differential Revision: https://reviews.llvm.org/D67965
llvm-svn: 372862
r366433 broke support for the system debugserver. Although the change
was well-intended, it (presumably) unintentionally removed the logic to
copy over the debugserver. As a result, even with
LLDB_USE_SYSTEM_DEBUGSERVER enabled, we ended up building, signing and
using the just-built debugserver.
This patch partially recovers the old behavior: when
LLDB_USE_SYSTEM_DEBUGSERVER is set we don't build debugserver and just
copy over the system one.
Differential revision: https://reviews.llvm.org/D67991
llvm-svn: 372786
That change didn't contain any explanation for this bit. There shouldn't
be any need for a check for MinGW ifdefs here, as long as the include
uses lowercase windows.h (as is used consistently elsewhere in
the llvm projects).
Differential Revision: https://reviews.llvm.org/D67894
llvm-svn: 372656
This silences warnings about comparison of integers between unsigned
long long (which is what the Windows SOCKET type is) and signed int
when building in MinGW mode.
Differential Revision: https://reviews.llvm.org/D67863
llvm-svn: 372486
This removes the CleanUp class and replaces its usages with llvm's
ScopeExit, which has similar semantics.
Differential revision: https://reviews.llvm.org/D67378
llvm-svn: 371474
plugin.
Unfortunately the test is currently XFAILed because of missing changes
to the clang driver.
Differential Revision: https://reviews.llvm.org/D67124
llvm-svn: 370931
The flakiness on our local machines seems to come for a race in the kernel
between task_suspend and the creation of the Mach exceptions for the threads
that hit breakpoints. The debugserver code is written with the assumption
that the kernel will be able to provide us with all the exceptions for a
given task once task_suspend returns. On machines with higher core counts,
this seems not to be the case. The first batch of exceptions we get after
task_suspend does not contain exceptions for all the threads that have hit
a breakpoint, thus they get misreprorted in the first stop packet.
Adding a 1ms timeout to the call that retrieves the batch of exceptions
seems to workaround the issue reliably on our machines, and it shoulnd't
impact standard debugging scenarios too much (a stop will incur an additional
1ms delay). We'll be talking to the kernel team to figure out the right
contract for those APIs.
This patch also reverts part of Jonas' previous workaround for the
issue (r370785).
llvm-svn: 370916
We were checking OPT_no_use_colors three times, twice to disable colors
and once to enable debug mode. This simplifies things and now the option
is only checked once.
llvm-svn: 370814
Instead of using a magic return error code from debugserver to
indicate that an attach failed because of SIP being enabled in
RNBRemote::HandlePacket_v, use the extended error reporting that
Pavel added to lldb/lldb-server in https://reviews.llvm.org/D45573
<rdar://problem/39398385>
llvm-svn: 369990
This patch is also motivated by the Swift branch and is effectively NFC for the single-TypeSystem llvm.org branch.
In multi-language projects it is extremely common to have, e.g., a
Clang type and a similarly-named rendition of that same type in
another language. When searching for a type It is much cheaper to pass
a set of supported languages to the SymbolFile than having it
materialize every result and then rejecting the materialized types
that have the wrong language.
Differential Revision: https://reviews.llvm.org/D66546
<rdar://problem/54471165>
This reapplies r369690 with a previously missing constructor for LanguageSet.
llvm-svn: 369710
This patch is also motivated by the Swift branch and is effectively NFC for the single-TypeSystem llvm.org branch.
In multi-language projects it is extremely common to have, e.g., a
Clang type and a similarly-named rendition of that same type in
another language. When searching for a type It is much cheaper to pass
a set of supported languages to the SymbolFile than having it
materialize every result and then rejecting the materialized types
that have the wrong language.
Differential Revision: https://reviews.llvm.org/D66546
<rdar://problem/54471165>
llvm-svn: 369690
Summary:
The former seems like it's not working on some platforms.
All the other uses use `llvm::`, so, let's change for consistency.
Reviewers: jasonmolenda, friss
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D66566
llvm-svn: 369618
This patch generalizes the FindTypes with CompilerContext interface to
support looking up a type of unknown kind by name, as well as looking
up a type inside an unspecified submodule. These features are
motivated by the Swift branch, but are fully tested via unit tests and
lldb-test on llvm.org. Specifically, this patch adds an AnyModule and
an AnyType CompilerContext kind.
Differential Revision: https://reviews.llvm.org/D66507
rdar://problem/54471165
llvm-svn: 369555
This patch removes the two variant of StringExtractor::GetStringRef that
return (non-)const references to std::string. The non-const one was
being abused to reinitialize the StringExtractor and its uses are
replaced by calls to the copy asignment operator. The const variant was
refactored to return an actual llvm::StringRef.
llvm-svn: 369493
The implementation of this function was obviously incorrect, as the
result variable was never used. This led me to check if it was actually
used anywhere, which came back negative.
llvm-svn: 369492
This adds a -compiler-context=<...> option to lldb-test that trakes a
comma-separated string that is a list of kind/name pairs and
translates it into a std::vector<CompilerContext>, a CompilerContext
being a pair of context-kind and name.
Differential Revision: https://reviews.llvm.org/D66453
<rdar://problem/54471165>
llvm-svn: 369407
Summary:
This can help `lldb-vscode` handle launch commands associate with remote platform
attach request have field `attachCommands` to handle attach specific commands
add a corresponding one for launch request
if no launch command is provided, create a new target and launch; otherwise, execute the launch command
Differential Revision: https://reviews.llvm.org/D65363
Patch by Wanyi Ye <kusmour@gmail.com>
llvm-svn: 369296
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
Differential revision: https://reviews.llvm.org/D66259
llvm-svn: 368933
Summary:
This commit contains three small changes to enable lldb-server on Windows.
- Add lldb-server for Windows to the build
- Disable pty redirection on Windows for the initial lldb-server bring up
- Add a support to get the parent pid for a process on Windows
- Ifdef some signals which aren't supported on Windows
Thanks to Hui Huang for the help with this patch!
Reviewers: labath
Reviewed By: labath
Subscribers: JDevlieghere, compnerd, Hui, amccarth, xiaobai, srhines, mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D61686
llvm-svn: 368774
Summary:
Explicitly code-sign the LLDB.framework copy of debugserver in the build-tree. This is necessary, because the Xcode-specific logic in `llvm_codesign` [1] has the side-effect that Xcode code-signs after post-build steps (here: after copying debugserver over into the framework). The special case for Xcode was necessary to avoid double-signing errors in the past (see D55116 and D55816).
[1] https://github.com/llvm/llvm-project/blob/36fb93982f0e/llvm/cmake/modules/AddLLVM.cmake#L1676
Reviewers: jingham, davide, JDevlieghere, teemperor
Reviewed By: JDevlieghere
Subscribers: beanz, mgorny, lldb-commits, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D65566
llvm-svn: 368151
Summary:
After rL368069 I noticed that HAVE_SYS_TYPES_H is not defined in
Platform.h, or anywhere else in lldb. This change fixes that.
Reviewers: labath
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D65822
llvm-svn: 368125
Adrian's changes to support Catalyst processes and my
changes to support debugserver running on an arm64_32
device (Apple Watch Series 4, which uses an IPL32 model
on arm64 cpus).
llvm-svn: 368118
After the recent refactorings the SymbolVendor passthrough no longer
serve any purpose. This patch removes those methods, and updates all
callsites to go to the symbol file directly -- in most cases that just
means calling GetSymbolFile()->foo() instead of
GetSymbolVendor()->foo().
llvm-svn: 368001
Summary:
This commit achieves the following:
- Functions used to return a `TypeSystem *` return an
`llvm::Expected<TypeSystem *>` now. This means that the result of a call
is always checked, forcing clients to move more carefully.
- `TypeSystemMap::GetTypeSystemForLanguage` will either return an Error or a
non-null pointer to a TypeSystem.
Reviewers: JDevlieghere, davide, compnerd
Subscribers: jdoerfert, lldb-commits
Differential Revision: https://reviews.llvm.org/D65122
llvm-svn: 367360
rL357954 did increase `packet-timeout` 1sec -> 5secs. Which is IMO about the
maximum timeout reasonable for regular use. But for testsuite I think the
timeout should be higher as the testsuite runs in parallel and it can be run
even on slow hosts and with other load (moreover if it runs on some slow arch).
I have chosen 60 secs, that should be enough hopefully. Larger value could
make debugging with hanging `lldb-server` annoying.
This patch was based on this testsuite timeout:
http://lab.llvm.org:8014/builders/lldb-x86_64-fedora/builds/546/steps/test/logs/stdio
FAIL: test_connect (TestGDBRemoteClient.TestGDBRemoteClient)
Test connecting to a remote gdb server
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/jkratoch/slave-lldb-x86_64-fedora/lldb-x86_64-fedora/llvm/tools/lldb/packages/Python/lldbsuite/test/functionalities/gdb_remote_client/TestGDBRemoteClient.py", line 13, in test_connect
process = self.connect(target)
File "/home/jkratoch/slave-lldb-x86_64-fedora/lldb-x86_64-fedora/llvm/tools/lldb/packages/Python/lldbsuite/test/functionalities/gdb_remote_client/gdbclientutils.py", line 480, in connect
self.assertTrue(error.Success(), error.description)
AssertionError: False is not True : failed to get reply to handshake packet
Differential Revision: https://reviews.llvm.org/D65271
llvm-svn: 367234
This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.
So instead of writing:
if (log)
log->Printf("%s\n", str);
You'd write:
LLDB_LOG(log, "%s\n", str);
This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.
find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +
Differential revision: https://reviews.llvm.org/D65128
llvm-svn: 366936
Summary:
SymbolFile classes are responsible for creating CompileUnit instances
and they already need to have a notion of the id<->CompileUnit mapping
(because of APIs like ParseCompileUnitAtIndex). However, the
SymbolVendor has remained as the thing responsible for caching created
units (which the SymbolFiles were calling via convoluted constructs like
"m_obj_file->GetModule()->GetSymbolVendor()->SetCompileUnitAtIndex(...)").
This patch moves the responsibility of caching the units into the
SymbolFile class. It does this by moving the implementation of
SymbolVendor::{GetNumCompileUnits,GetCompileUnitAtIndex} into the
equivalent SymbolFile functions. The SymbolVendor functions become just
a passthrough much like the rest of SymbolVendor.
The original implementations of SymbolFile::GetNumCompileUnits is moved
to "CalculateNumCompileUnits", and are made protected, as the "Get"
function is the external api of the class.
SymbolFile::ParseCompileUnitAtIndex is made protected for the same
reason.
This is the first step in removing the SymbolVendor indirection, as
proposed in
<http://lists.llvm.org/pipermail/lldb-dev/2019-June/015071.html>. After
removing all interesting logic from the SymbolVendor class, I'll proceed
with removing the indirection itself.
Reviewers: clayborg, jingham, JDevlieghere
Subscribers: jdoerfert, lldb-commits
Differential Revision: https://reviews.llvm.org/D65089
llvm-svn: 366791
Summary: Make debugserver a tool like lldb-server, so it can be included/excluded via `LLDB_TOOL_DEBUGSERVER_BUILD`. This replaces the old `LLDB_NO_DEBUGSERVER` flag. Doing the same for darwin-debug while I am here.
Reviewers: xiaobai, JDevlieghere, davide
Reviewed By: xiaobai, JDevlieghere
Subscribers: mgorny, lldb-commits, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64994
llvm-svn: 366631
Summary:
We can always build debugserver, but we can't always sign it to be useable for testing. `LLDB_USE_SYSTEM_DEBUGSERVER` should only tell whether or not the system debugserver should be used for testing.
The old behavior complicated the logic around debugserver a lot. The new logic sorts out most of it.
Please note that this patch is in early stage and needs some more testing. It should not affect platfroms other than Darwin. It builds on Davide's approach to validate the code-signing identity at configuration time.
What do you think?
Reviewers: xiaobai, JDevlieghere, davide, compnerd, friss, labath, mgorny, jasonmolenda
Reviewed By: JDevlieghere
Subscribers: lldb-commits, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64806
llvm-svn: 366433
Summary:
Windows requires re-setting the signal handler each time it is used
and thus ctrl-c was not behaving properly on Windows
Reviewers: jfb
Differential Revision: https://reviews.llvm.org/D64046
llvm-svn: 365868
This patch adds two convenience methods named GetAsLLVM to the LLDB
counterparts of the DWARF DataExtractor and the DWARF context. The
DWARFContext, once created, is cached for future usage.
Differential revision: https://reviews.llvm.org/D64535
llvm-svn: 365819
Summary:
There's a number of requirements for installing LLDB on macOS that are untypical for LLVM projects: use special install-prefix for LLDB.framework, ship headers and tools as framework resources, patch RPATHs, externalize debug-info to dSYM's and strip binaries with `-ST`. For some of it we could use `llvm_externalize_debuginfo()` in the past and just add special cases. However, this complicates the code for all projects and comes with the major drawback, that it adds all these actions at build-time, i.e. dSYM creation and stripping take a lot of time and don't make sense at build-time.
LLVM's distribution mechanism (https://llvm.org/docs/BuildingADistribution.html) appears to be the natural candidate to install LLDB. Based on D64399 (enable in standalone builds), this patch integrates framework installation with the distribution mechanism and adds custom stripping flags and dSYM creation at install-time. Unlike the abandoned D61952, it leaves build-tree binaries untouched, so there's no side-effects on testing. Potential install-order issues must be handled externally.
Please let me know what you think, while I run a few more tests and add remarks+documentation.
Reviewers: xiaobai, compnerd, JDevlieghere, davide, labath, mgorny
Reviewed By: xiaobai, JDevlieghere
Subscribers: lldb-commits, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64408
llvm-svn: 365617
After discussing this internally, it is my understanding this was used
for building LLDB internally at Apple, and is no longer used or
necessary.
llvm-svn: 365392
As discussed offline, this tool is no longer used or maintained, and
doesn't provide the right abstraction for performance tracking in lldb.
Differential revision: https://reviews.llvm.org/D64362
llvm-svn: 365391
D55859 <https://reviews.llvm.org/D55859> has no effect for some of the
testcases so this patch extends it even for (all?) other testcases known to me.
LLDB was failing when LLDB prints errors reading system debug infos
(`*-debuginfo.rpm`, DWZ-optimized) which should never happen as LLDB testcases
should not be affected by system debug infos.
`lldb/packages/Python/lldbsuite/test/api/multithreaded/driver.cpp.template` is
using only SB API which does not expose `ModuleList` so I had to call
`HandleCommand()` there.
`lldb-test.cpp` could also use `HandleCommand` and then there would be no need
for `ModuleListProperties::SetEnableExternalLookup()` but I think it is cleaner
with API and not on based on text commands.
Differential Revision: https://reviews.llvm.org/D63339
llvm-svn: 363567
Problem discovered in the breakpoint lit test, but probably exists in others.
lldb-test splits lines on LF. Input files that are CR+LF separated (as is
common on Windows) then resulted in commands being sent to LLDB that ended
in CR, which confused the command interpreter.
This could be fixed at different levels:
1. Treat '\r' like a tab or space in the argument splitter.
2. Fix the line splitters (plural) in lldb-test.
3. Normalize the test files to LF only.
If we did only 3, I'd expect similar problems to recur, so this patch does
1 and 2. I may also do 3 in a separate patch later, but that's tricky
because I believe we have some input files that MUST use CR+LF.
Differential Revision: https://reviews.llvm.org/D62759
llvm-svn: 362844
Summary: The LLDB test suite doesn't need lldb-server in the framework bundle anymore.
Reviewers: JDevlieghere, jasonmolenda, xiaobai
Reviewed By: JDevlieghere
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62474
llvm-svn: 361947
Summary:
Modify the way LLDB.framework tools are collected. This allows for better fine-tuning of the install behavior downstream. Each target calls `lldb_add_to_framework()` individually. When entering the function, the target exists and we can tweak its very own post-build and install steps. This was not possible with the old `LLDB_FRAMEWORK_TOOLS` approach.
No function change otherwise.
This is a reduced follow-up from the proposal in D61952.
Reviewers: xiaobai, compnerd, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: clayborg, friss, ki.stfu, mgorny, lldb-commits, labath, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62472
llvm-svn: 361946
Summary:
NFC = [[ https://llvm.org/docs/Lexicon.html#nfc | Non functional change ]]
This commit is the result of modernizing the LLDB codebase by using
`nullptr` instread of `0` or `NULL`. See
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-nullptr.html
for more information.
This is the command I ran and I to fix and format the code base:
```
run-clang-tidy.py \
-header-filter='.*' \
-checks='-*,modernize-use-nullptr' \
-fix ~/dev/llvm-project/lldb/.* \
-format \
-style LLVM \
-p ~/llvm-builds/debug-ninja-gcc
```
NOTE: There were also changes to `llvm/utils/unittest` but I did not
include them because I felt that maybe this library shall be updated in
isolation somehow.
NOTE: I know this is a rather large commit but it is a nobrainer in most
parts.
Reviewers: martong, espindola, shafik, #lldb, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, JDevlieghere, teemperor, rnkovacs, emaste, kubamracek, nemanjai, ki.stfu, javed.absar, arichardson, kbarton, jrtc27, MaskRay, atanasyan, dexonsmith, arphaman, jfb, jsji, jdoerfert, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D61847
llvm-svn: 361484
The driver passes by reference an uninitialized num_errors variable to
RunCommandInterpreter. This should be fine, as it's supposed to be
an output argument, but the reproducer instrumentation reads it in order
to record the value of all the arguments to the function.
This change fixes it by initializing num_errors to 0 before calling
RunCommandInterpreter.
llvm-svn: 361444
`terminate` overlaps with a C function on Windows:
```
D:\a\1\s\lldb\tools\lldb-server\lldb-server.cpp(45,13): warning: 'terminate' redeclared without 'dllimport' attribute: 'dllexport' attribute added [-Winconsistent-dllimport]
static void terminate() { g_debugger_lifetime->Terminate(); }
^
C:\Program Files (x86)\Windows Kits\10\include\10.0.17763.0\ucrt\corecrt_terminate.h(29,48): note: previous declaration is here
_ACRTIMP __declspec(noreturn) void __cdecl terminate() throw();
^
D:\a\1\s\lldb\tools\lldb-server\lldb-server.cpp(45,61): warning: function declared 'noreturn' should not return [-Winvalid-noreturn]
static void terminate() { g_debugger_lifetime->Terminate(); }
^
```
Rename the function to `terminate_debugger` to avoid the errant match.
llvm-svn: 360693
We cannot manipulate the LLDB_TOOL_LLDB_SERVER_BUILD directly from
LLDBConfig.cmake because this would set the variable before the option
is defined in AddLLVM.cmake. Instead, we need to use the
LLDB_CAN_USE_LLDB_SERVER variable to conditionally add the lldb-server
subdirectory. This should ensure the variable doesn't get cleared.
llvm-svn: 360631
We can piggyback off the existing add_lldb_tool_subdirectory to decide
whether or not lldb-server should be built.
Differential revision: https://reviews.llvm.org/D61872
llvm-svn: 360621
This patch adds a command line flag that allows lldb to load local
lldbinit files.
Differential revision: https://reviews.llvm.org/D61578
llvm-svn: 360172
Currently we have special handling for local lldbinit files in the
driver. At the same time, we have an SB API named
`SourceInitFileInCurrentWorkingDirectory` that does the same thing.
This patch removes the special handling from the driver and uses the API
instead. In addition to the obvious advantages of having one canonical
way of doing things and removing code duplication, this change also
means that the code path is the same for global and local lldb init
files.
Differential revision: https://reviews.llvm.org/D61577
llvm-svn: 360077
Checking this in for Antonio Afonso:
This diff changes the function LineEntry::GetSameLineContiguousAddressRange so that it also includes function calls that were inlined at the same line of code.
My motivation is to decrease the step over time of lines that heavly rely on inlined functions. I have multiple examples in the code base I work that makes a step over stop 20 or mote times internally. This can easly had up to step overs that take >500ms which I was able to lower to 25ms with this new strategy.
The reason the current code is not extending the address range beyond an inlined function is because when we resolve the symbol at the next address of the line entry we will get the entry line corresponding to where the original code for the inline function lives, making us barely extend the range. This then will end up on a step over having to stop multiple times everytime there's an inlined function.
To check if the range is an inlined function at that line I also get the block associated with the next address and check if there is a parent block with a call site at the line we're trying to extend.
To check this I created a new function in Block called GetContainingInlinedBlockWithCallSite that does exactly that. I also added a new function to Declaration for convinence of checking file/line named CompareFileAndLine.
To avoid potential issues when extending an address range I added an Extend function that extends the range by the AddressRange given as an argument. This function returns true to indicate sucess when the rage was agumented, false otherwise (e.g.: the ranges are not connected). The reason I do is to make sure that we're not just blindly extending complete_line_range by whatever GetByteSize() we got. If for some reason the ranges are not connected or overlap, or even 0, this could be an issue.
I also added a unit tests for this change and include the instructions on the test itself on how to generate the yaml file I use for testing.
Differential Revision: https://reviews.llvm.org/D61292
llvm-svn: 360071
The debug server does not need to use the instruction emulation. This
helps reduce the size of the final lldb-server binary by another ~100K
(~1% savings).
llvm-svn: 360067
We don't need the variables in lit, we can use the capabilities to check
if the utility exists.
Differential revision: https://reviews.llvm.org/D61533
llvm-svn: 359926
Summary:
According to [C128] "Virtual functions should specify exactly one
of `virtual`, `override`, or `final`", I've added override where a
virtual function is overriden but the explicit `override` keyword
was missing. Whenever both `virtual` and `override` were specified,
I removed `virtual`. As C.128 puts it:
> [...] writing more than one of these three is both redundant and
> a potential source of errors.
I anticipate a discussion about whether or not to add `override` to
destructors but I went for it because of an example in [ISOCPP1000].
Let me repeat the comment for you here:
Consider this code:
```
struct Base {
virtual ~Base(){}
};
struct SubClass : Base {
~SubClass() {
std::cout << "It works!\n";
}
};
int main() {
std::unique_ptr<Base> ptr = std::make_unique<SubClass>();
}
```
If for some odd reason somebody removes the `virtual` keyword from the
`Base` struct, the code will no longer print `It works!`. So adding
`override` to destructors actively protects us from accidentally
breaking our code at runtime.
[C128]: https://github.com/isocpp/CppCoreGuidelines/blob/master/CppCoreGuidelines.md#c128-virtual-functions-should-specify-exactly-one-of-virtual-override-or-final
[ISOCPP1000]: https://github.com/isocpp/CppCoreGuidelines/issues/1000#issuecomment-476951555
Reviewers: teemperor, JDevlieghere, davide, shafik
Reviewed By: teemperor
Subscribers: kwk, arphaman, kadircet, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D61440
llvm-svn: 359868
Remove unused from the driver class. I noticed a bunch of small thing
while doing this that didn't warrant separate commits, so I've lumped
them together into this patch.
llvm-svn: 359355
Summary:
Saves some build times, and they're not part of the usual
developer workflow.
Reviewers: JDevlieghere, friss
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D60780
llvm-svn: 358528
In an effort to help new LLDB developers, we added checks and messaging around
the selection of your codesigning identity on macOS. While helpful, it is not
actually correct. It's perfectly valid to codesign with an identity that is
not named lldb_codesign. Currently this fails the build.
This patch keeps a warning that informs developers how to setup lldb_codesign
and how to pass it to cmake, but it allows the build to proceed with a
different identity.
llvm-svn: 358525
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
For some reason I had convinced myself that functions returning by
pointer or reference do not require recording their result. However,
after further considering I don't see how that could work, at least not
with the current implementation. Interestingly enough, the reproducer
instrumentation already (mostly) accounts for this, though the
lldb-instr tool did not.
This patch adds the missing macros and updates the lldb-instr tool.
Differential revision: https://reviews.llvm.org/D60178
llvm-svn: 357639
Adrian Prantl