Remove the redudant "0x" prefix in the "dirty-pages" key of
qMemoryRegionInfo packet. The client accepts hex values both with
and without the prefix.
Differential Revision: https://reviews.llvm.org/D110510
The StringConvert API is no longer used anywhere but in debugserver.
Since debugserver does not use LLVM API, we cannot replace it with
llvm::to_integer() and llvm::to_float() there. Let's just move
the sources into debugserver.
Differential Revision: https://reviews.llvm.org/D110478
Replace misc. StringConvert uses with llvm::to_integer()
and llvm::to_float(), except for cases where further refactoring is
planned. The purpose of this change is to eliminate the StringConvert
API that is duplicate to LLVM, and less correct in behavior at the same
time.
Differential Revision: https://reviews.llvm.org/D110447
Refactor Socket::DecodeHostAndPort() to use LLVM API over redundant
LLDB API. In particular, this means llvm::Regex, llvm::Error return
type and llvm::to_integer().
While at it, change the port type from int32_t to uint16_t. The method
never returns any value outside this range, and using the correct type
allows us to rely on getAsInteger()'s implicit overflow check.
Differential Revision: https://reviews.llvm.org/D110391
Refactor Socket::DecodeHostAndPort() to use LLVM API over redundant
LLDB API. In particular, this means llvm::Regex, llvm::Error return
type and llvm::to_integer().
While at it, change the port type from int32_t to uint16_t. The method
never returns any value outside this range, and using the correct type
allows us to rely on getAsInteger()'s implicit overflow check.
Differential Revision: https://reviews.llvm.org/D110391
The thread that Visual Studio Code displays on a stop is called the focus thread. When the previous focus thread exits and we stop in a new thread, lldb-vscode does not tell vscode to set the new thread as the focus thread, so it selects the first thread in the thread list.
This patch changes lldb-vscode to tell vscode that the new thread is the focus thread. It also includes a test that verifies the DAP stop message for this case contains the correct values.
Reviewed By: clayborg, wallace
Differential Revision: https://reviews.llvm.org/D109633
This diff modifies the LLDB server return codes to more accurately reflect usage
error paths. Specifically we always propagate the return codes from the main
entrypoints into GDB remote LLDB server, and platform LLDB server. This way, the
top-level caller of LLDB server will be able to correctly check whether the
executable exited with or without an error.
We additionally modify and extend the associated shell unit tests to expect
nonzero return codes on error conditions.
Test Plan:
LLDB tests pass:
```
ninja check-lldb
```
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D108351
These two tests, TestSkinnyCorefile.py and TestStackCorefile.py,
require a new debugserver on darwin systems to run correctly; for now,
skip them if the system debugserver is in use. There's no easy way to
test if the debugserver being used supports either of these memory
region info features. For end users, the fallback will be a full
corefile and that's not the worst thing, but for the tests it is a
problem.
Add a field to the qMemoryRegionInfo packet where the remote stub
can describe the type of memory -- heap, stack. Keep track of
memory regions that are stack memory in lldb. Add a new "--style
stack" to process save-core to request that only stack memory be
included in the corefile.
Differential Revision: https://reviews.llvm.org/D107625
They used to be referenced from the .xcodeproj files, but those are long gone.
No behavior change.
Differential Revision: https://reviews.llvm.org/D107444
VScode now sends a "scopes" DAP request immediately after any expression evaluation.
This scopes request would clear and invalidate any non-scoped expandable variables in g_vsc.variables, causing later "variables" request to return empty result.
The symptom is that any expandable variables in VScode watch window/debug console UI to return empty content.
This diff fixes this issue by only clearing the expandable variables at process continue time. To achieve this, we have to repopulate all scoped variables
during context switch for each "scopes" request without clearing global expandable variables.
So the PR puts the scoped variables into its own locals/globals/registers; and all expandable variables into separate "expandableVariables" list.
Also, instead of using the variable index for "variableReference", it generates a new variableReference id each time as the key of "expandableVariables".
As a further new feature, this PR adds a new "expandablePermanentVariables" which has the lifetime of debug session. Any expandable variables from debug console
are added into this list. This enables users to snapshot expanable old variable in debug console and compare with new variables if desire.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D105166
LLVM includes this header unconditionally on all platforms
(including Windows), so this define should no longer be necessary.
No behavior change.
Differential Revision: https://reviews.llvm.org/D107338
Remove the DarwinLog and qStructuredDataPlugins support
from debugserver. The DarwinLog plugin was never debugged
fully and made reliable, and the underlying private APIs
it uses have migrated since 2016 so none of them exist
any longer.
Differential Revision: https://reviews.llvm.org/D106324
rdar://75073283
Based on:
[lldb-dev] proposed change to remove conditional WCHAR support in libedit wrapper
https://lists.llvm.org/pipermail/lldb-dev/2021-July/016961.html
There is already setlocale in lldb/source/Core/IOHandlerCursesGUI.cpp
but that does not apply for Editline GUI editing.
Unaware how to make automated test for this, it requires pty.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D105779
cli-wrapper-mpxtable.cpp was emitting warnings from printfs of
uint64_t on 32 bit arm build. This patch makes affected printfs
in cli-wrapper-mpxtable.cpp portable accross targets variants.
When the number of shared libs is massive, there could be hundreds of
thousands of short lived progress events sent to the IDE, which makes it
irresponsive while it's processing all this data. As these small jobs
take less than a second to process, the user doesn't even see them,
because the IDE only display the progress of long operations. So it's
better not to send these events.
I'm fixing that by sending only the events that are taking longer than 5
seconds to process.
In a specific run, I got the number of events from ~500k to 100, because
there was only 1 big lib to parse.
I've tried this on several small and massive targets, and it seems to
work fine.
Differential Revision: https://reviews.llvm.org/D101128
A few users recently were trying to set environment values when using lldb-vscode and were unsure of the format of the "env" launch configuration setting. Clarify the exact format as when users add the "env" launch config setting, they can see this help string in the IDE.
Differential Revision: https://reviews.llvm.org/D104578
Add a new feature to process save-core on Darwin systems -- for
lldb to create a user process corefile with only the dirty (modified
memory) pages included. All of the binaries that were used in the
corefile are assumed to still exist on the system for the duration
of the use of the corefile. A new --style option to process save-core
is added, so a full corefile can be requested if portability across
systems, or across time, is needed for this corefile.
debugserver can now identify the dirty pages in a memory region
when queried with qMemoryRegionInfo, and the size of vm pages is
given in qHostInfo.
Create a new "all image infos" LC_NOTE for Mach-O which allows us
to describe all of the binaries that were loaded in the process --
load address, UUID, file path, segment load addresses, and optionally
whether code from the binary was executing on any thread. The old
"read dyld_all_image_infos and then the in-memory Mach-O load
commands to get segment load addresses" no longer works when we
only have dirty memory.
rdar://69670807
Differential Revision: https://reviews.llvm.org/D88387
When the number of shared libs is massive, there could be hundreds of
thousands of short lived progress events sent to the IDE, which makes it
irresponsive while it's processing all this data. As these small jobs
take less than a second to process, the user doesn't even see them,
because the IDE only display the progress of long operations. So it's
better not to send these events.
I'm fixing that by sending only the events that are taking longer than 5
seconds to process.
In a specific run, I got the number of events from ~500k to 100, because
there was only 1 big lib to parse.
I've tried this on several small and massive targets, and it seems to
work fine.
Differential Revision: https://reviews.llvm.org/D101128
If an inferior exits prior to the processing of a disconnect request,
then the threads executing EventThreadFunction and request_discontinue
respectively may call SendTerminatedEvent simultaneously, in turn,
testing and/or setting g_vsc.sent_terminated_event without any
synchronization. In case the thread executing EventThreadFunction sets
it before the thread executing request_discontinue has had a chance to
test it, the latter would move ahead to issue a response to the
disconnect request. Said response may be dispatched ahead of the
terminated event compelling the client to terminate the debug session
without consuming any console output that might've been generated by
the execution of terminateCommands.
Reviewed By: clayborg, wallace
Differential Revision: https://reviews.llvm.org/D103609
Now that LLDB proper has built-in support for intel-pt traces, we can remove the old plugin written by Intel. It has less features and it's hard to work with.
As a test, I ran "ninja lldbIntelFeatures" and it worked.
Differential Revision: https://reviews.llvm.org/D102866
The C headers are deprecated so as requested in D102845, this is replacing them
all with their (not deprecated) C++ equivalent.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D103084
The dyld SPI used by debugserver (_dyld_process_info_create) has become
much slower in macOS BigSur 11.3 causing a significant performance
regression when attaching. This commit mitigates that by caching the
result when calling the SPI to compute the platform.
Differential revision: https://reviews.llvm.org/D102833
A debugserver launched x86_64 cannot control an arm64/arm64e
process on an Apple Silicon system. Warn when this situation
has happened and return an error for the most common case of
attach. I think there will be refinements to this in the
future, but start out by making it easy to spot the problem
when it happens.
rdar://76630595
The lack of a dot before the suffix is intentional, as the suffix itself
includes a dot or dash.
Differential revision: https://reviews.llvm.org/D101655
As a follow up of https://reviews.llvm.org/D99989#inline-953343, I'm now
storing std::string instead of char *. I know it might never break as char *,
but if it does, chasing that bug might be dauting.
Besides, I'm also checking of the strings gotten through the SB API are
null or not.
Introduce three new stop reasons for fork, vfork and vforkdone events.
This includes server support for serializing fork/vfork events into
gdb-remote protocol. The stop infos for the two base events take a pair
of PID and TID for the newly forked process.
Differential Revision: https://reviews.llvm.org/D100196
Some linters get rather upset upon seeing
`std::unordered_map<const char*`, because it looks like a map of
strings but isn't. lldb uses interned strings so this is not a problem.
DenseMap is a better data structure for this anyways, so use that
instead.
VSCode doesn't render multiple variables with the same name in the variables view. It only renders one of them. This is a situation that happens often when there are shadowed variables.
The nodejs debugger solves this by adding a number suffix to the variable, e.g. "x", "x2", "x3" are the different x variables in nested blocks.
In this patch I'm doing something similar, but the suffix is " @ <file_name:line>), e.g. "x @ main.cpp:17", "x @ main.cpp:21". The fallback would be an address if the source and line information is not present, which should be rare.
This fix is only needed for globals and locals. Children of variables don't suffer of this problem.
When there are shadowed variables
{F16182150}
Without shadowed variables
{F16182152}
Modifying these variables through the UI works
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D99989
In certain occasions times, like when LLDB is initializing and
evaluating the .lldbinit files, it tries to print to stderr and stdout
directly. This confuses the IDE with malformed data, as it talks to
lldb-vscode using stdin and stdout following the JSON RPC protocol. This
ends up terminating the debug session with the user unaware of what's
going on. There might be other situations in which this can happen, and
they will be harder to debug than the .lldbinit case.
After several discussions with @clayborg, @yinghuitan and @aadsm, we
realized that the best course of action is to simply redirect stdout and
stderr to the console, without modifying LLDB itself. This will prove to
be resilient to future bugs or features.
I made the simplest possible redirection logic I could come up with. It
only works for POSIX, and to make it work with Windows should be merely
changing pipe and dup2 for the windows equivalents like _pipe and _dup2.
Sadly I don't have a Windows machine, so I'll do it later once my office
reopens, or maybe someone else can do it.
I'm intentionally not adding a stop-redirecting logic, as I don't see it
useful for the lldb-vscode case (why would we want to do that, really?).
I added a test.
Note: this is a simpler version of D80659. I first tried to implement a
RIIA version of it, but it was problematic to manage the state of the
thread and reverting the redirection came with some non trivial
complexities, like what to do with unflushed data after the debug
session has finished on the IDE's side.
This diff ass postRunCommands, which are the counterpart of the preRunCommands. TThey will be executed right after the target is launched or attached correctly, which means that the targets can assume that the target is running.
Differential Revision: https://reviews.llvm.org/D100340
Use a variable of static storage duration to reference an intentionally
leaked variable. A static data area is in the GC-set of various leak
checkers.
This fixes 3 `check-lldb-shell` tests in a `-DLLVM_USE_SANITIZER={Leaks,Address}` build,
e.g. `test/Shell/Reproducer/TestHomeDir.test`
Differential Revision: https://reviews.llvm.org/D100806
Michał Górny