Previous way of accessing templated methods was a bit bulky,
Patch introduces small interface based solution.
Differential revision: https://reviews.llvm.org/D23872
llvm-svn: 280910
Summary:
C allows to jump over variables declaration so lifetime.start can be
avoid before variable usage. To avoid false-positives on such rare cases
we detect them and remove from lifetime analysis.
PR27453
PR28267
Reviewers: eugenis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24321
llvm-svn: 280907
mode in lldb works. I've been discussing this with Jim Ingham,
Greg Clayton, and Kate Stone for the past week or two.
Previously lldb would print three source lines (centered on the
line table entry line for the current line) followed by the assembly.
It would print the context information (module`function + offset)
before those three lines of source.
Now lldb will print up to two lines before/after the line table
entry. It prints two '*' characters for the line table line to
make it clear what line is showing assembly. There is one line of
whitespace before/after the source lines so the separation between
source & assembly is clearer. I don't print the context line
(module`function + offset). I stop printing context lines if it's
a different line table entry, or if it's a source line I've already
printed as context to another source line. If I have two line table
entries one after another for the same source line (I get these often
with clang - with different column information in them), I only print
the source line once.
I'm also using the target.process.thread.step-avoid-regexp setting
(which keeps you from stepping into STL functions that have been inlined
into your own code) and avoid printing any source lines from functions
that match that regexp.
When lldb disassembles into a new function, it will try to find the
declaration line # for the function and print all of the source lines
between the decl and the first line table entry (usually a { curly brace)
so we have a good chance of including the arguments, at least with the
debug info emitted by clang.
Finally, the # of source lines of context to show has been separated
from whether we're doing mixed source & assembly or not. Previously
specifying 0 lines of context would turn off mixed source & assembly.
I think there's room for improvement, and maybe some bugs I haven't
found yet, but it's in good enough shape to upstream and iterate at
this point.
I'm not sure how best to indicate which source line is the actual line
table # versus context lines. I'm using '**' right now. Both Kate
and Greg had the initial idea to reuse '->' (normally used to indicate
"currently executing source line") - I tried it but I wasn't thrilled,
I'm too used to the established meaning of ->.
Greg had the interesting idea of avoiding context source lines only
in two line table entries in the same source file. So we'd print
two lines before & after a source line, and then the next line table
entry (if it was on the next source line after those two context lines)
we'd display only the following two lines -- the previous two had just
been printed. If an inline source line was printed between these two,
though, we'd print the context lines for both of them. It's an
interesting idea, and I want to see how it works with both -O0 and -O3
codegen where we have different amounts of inlining.
<rdar://problem/27961419>
llvm-svn: 280906
macro, so writing ::dispatch_release did not work as expected.
Remove the global anon namespace :: designation; the header will
get us the correct declaration.
llvm-svn: 280903
Function::GetStartLineSourceInfo before we try to
return the start line information about a function;
this function requires it to have been initialized.
llvm-svn: 280902
Summary:
When cloning blocks for prologue/epilogue we need to replicate the loop
structure from the original loop. It wasn't a problem for the innermost
loops, but it led to an incorrect loop info when we unrolled a loop with
a child loop - in this case created prologue-loop had a child loop, but
loop info didn't reflect that.
This fixes PR28888.
Reviewers: chandlerc, sanjoy, hfinkel
Subscribers: llvm-commits, silvas
Differential Revision: https://reviews.llvm.org/D24203
llvm-svn: 280901
- Simplify signature of CreateVTableInitializer function.
- Move vtable component builder to a separate function.
- Remove unnecessary accessors from VTableLayout class.
This is in preparation for a future change that will alter the type of the
vtable initializer.
Differential Revision: https://reviews.llvm.org/D22642
llvm-svn: 280897
In r279628, we made SourceCoverageView list the binary associated with a
view and started adding labels (e.g "Source: foo" or "Function: bar") to
everything. Condense this information a bit to unclutter reports.
llvm-svn: 280896
CGP tail-duplicates rets into blocks that end with a call that feed the ret.
This puts the call in tail position, potentially allowing the DAG builder to
lower it as a tail call. To avoid tail duplication in cases where we won't
form the tail call, CGP tried to predict whether this is going to be possible,
and avoids doing it when lowering as a tail call will definitely fail.
However, it was being too conservative by always throwing away calls to
functions with a signext/zeroext attribute on the return type.
Instead, we can use the same logic the builder uses to determine whether the
attributes work out.
Differential Revision: https://reviews.llvm.org/D24315
llvm-svn: 280894
This is a port of XRay to ARM 32-bit, without Thumb support yet. The XRay instrumentation support is moving up to AsmPrinter.
This is one of 3 commits to different repositories of XRay ARM port. The other 2 are:
1. https://reviews.llvm.org/D23932 (Clang test)
2. https://reviews.llvm.org/D23933 (compiler-rt)
Differential Revision: https://reviews.llvm.org/D23931
llvm-svn: 280888
Reset the SIGABRT signal handler before calling abort().
Also, change the error message when catching SIGABRT to say "ABRT"
instead of "SEGV".
llvm-svn: 280885
Summary:
This file should be referenced from
thinlto-function-summary-callgraph-pgo.ll file,
but someone forgot to use it there. Everything worked because
we store pgo data about callsite blocks, so there is no need to have
pgo count of @func.
Reviewers: tejohnson, eraman, mehdi_amini
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D24309
llvm-svn: 280882
Summary:
C allows to jump over variables declaration so lifetime.start can be
avoid before variable usage. To avoid false-positives on such rare cases
we detect them and remove from lifetime analysis.
PR27453
PR28267
Reviewers: eugenis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24321
llvm-svn: 280880
On Linux ARM, the syscall will take 3 arguments (start, end, flags). Ensure
that we do not pass garbage to the flags, which can cause the cacheflush call to
fail, and therefore cause an abort at runtime.
llvm-svn: 280877
Android-specific code in GetCurrentThread() does not handle the situation when there is no
ThreadContext for the current thread. This happens if the current thread is requested before the
main thread is added to the registry. 64-bit allocator does that to record map/unmap stats during
initialization.
llvm-svn: 280876
Normally, syslog() uses argv[0] for the log tag; bionic, however,
would crash in syslog() before libc constructor unless the log
tag is explicitly set with openlog().
llvm-svn: 280875
The attempt to fix requoting behavior in r280487 after changes to
tooling::Replacements are incomplete. We essentially need to add to
replacements at the same position, one to insert a line break and one to
change the quoting and that's incompatible with the new
tooling::Replacement API, which does not allow for order-dependent
Replacements. To make the order clear, Replacements::merge() has to be
used, but that requires the merged Replacement to actually refer to the
changed text, which is hard to reproduce for the requoting.
This change fixes the behavior by moving the requoting to a completely
separate pass. The added benefit is that no weird ColumnWidth
calculations are necessary anymore and this should just work even if we
implement string literal splitting in the future.
llvm-svn: 280874
clang (since r280553) allows pointer casts in function overloads,
so we need to disambiguate the second argument.
clang might be smarter about overloads in the future
see https://reviews.llvm.org/D24113, but let's be safe in libclc anyway.
llvm-svn: 280871
We can't create metadata-valued PHIs; don't try to do so when sinking.
I created a test case for this using the @llvm.type.test intrinsic, because it
takes a metadata parameter and does not have severe side effects (thus
SimplifyCFG is willing to otherwise sink it).
Previously, running the test case would crash with:
Invalid use of metadata!
%.sink = select i1 %flag, metadata <...>, metadata <0x4e45dc0>
LLVM ERROR: Broken function found, compilation aborted!
llvm-svn: 280866
GCC passes it by default on powerpc64 on FreeBSD. GNU ld claims "this
option is ignored for SVR4 compatibility", so we can ignore it too.
Differential Revision: https://reviews.llvm.org/D24313
llvm-svn: 280864
Summary:
A few small changes required to permit building the sanitizers
with Clang instead of only with MSVC.
Reviewers: compnerd, beanz, rnk
Subscribers: beanz, timurrrr, kubabrecka, dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D24092
llvm-svn: 280863
This is a revert of r280676 which was a revert of r280637;
ie, this is r280637 again. It was speculatively reverted to
help debug buildbot failures.
llvm-svn: 280861
George Rimar