PVS Studio's copy+paste recognizer was seeing this as a typo, technically Op0/Op1 in a fcmp should always be the same type, but we might as well avoid the issue.
Reported in https://www.viva64.com/en/b/0629/
llvm-svn: 359482
This patch rewrites the existing PACKSS/PACKUS constant folding code to expand as a generic expansion.
This is a first NFCI step toward expanding PACKSS/PACKUS intrinsics which are acting as non-saturating truncations (although technically the expansion could be used in all cases - but we'll probably want to be conservative).
llvm-svn: 359111
If we have a masked.load from a location we know to be dereferenceable, we can simply issue a speculative unconditional load against that address. The key advantage is that it produces IR which is well understood by the optimizer. The select (cnd, load, passthrough) form produced should be pattern matchable back to hardware predication if profitable.
Differential Revision: https://reviews.llvm.org/D59703
llvm-svn: 359000
If we have a store to a piece of memory which is known constant, then we know the store must be storing back the same value. As a result, the store (or memset, or memmove) must either be down a dead path, or a noop. In either case, it is valid to simply remove the store.
The motivating case for this involves a memmove to a buffer which is constant down a path which is dynamically dead.
Note that I'm choosing to implement the less aggressive of two possible semantics here. We could simply say that the store *is undefined*, and prune the path. Consensus in the review was that the more aggressive form might be a good follow on change at a later date.
Differential Revision: https://reviews.llvm.org/D60659
llvm-svn: 358919
In the process, use the existing masked.load combine which is slightly stronger, and handles a mix of zero and undef elements in the mask.
llvm-svn: 358913
In InstCombine, we use an idiom of "store i1 true, i1 undef" to indicate we've found a path which we've proven unreachable. We can't actually insert the unreachable instruction since that would require changing the CFG. We leave that to simplifycfg later.
This just factors out that idiom creation so we don't duplicate the same mostly undocument idiom creation in multiple places.
llvm-svn: 358600
If a constant shift amount is used, then only some of the LHS/RHS
operand bits are demanded and we may be able to simplify based on
that. InstCombineSimplifyDemanded already had the necessary support
for that, we just weren't calling it with fshl/fshr as root.
In particular, this allows us to relax some masked funnel shifts
into simple shifts, as shown in the tests.
Patch by Shawn Landden.
Differential Revision: https://reviews.llvm.org/D60660
llvm-svn: 358515
This adds a WithOverflowInst class with a few helper methods to get
the underlying binop, signedness and nowrap type and makes use of it
where sensible. There will be two more uses in D60650/D60656.
The refactorings are all NFC, though I left some TODOs where things
could be improved. In particular we have two places where add/sub are
handled but mul isn't.
Differential Revision: https://reviews.llvm.org/D60668
llvm-svn: 358512
Summary:
Enable some of the existing size optimizations for cold code under PGO.
A ~5% code size saving in big internal app under PGO.
The way it gets BFI/PSI is discussed in the RFC thread
http://lists.llvm.org/pipermail/llvm-dev/2019-March/130894.html
Note it doesn't currently touch loop passes.
Reviewers: davidxl, eraman
Reviewed By: eraman
Subscribers: mgorny, javed.absar, smeenai, mehdi_amini, eraman, zzheng, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59514
llvm-svn: 358422
As pointed out in D60518 folding mulo(%x, undef) to {undef, undef}
isn't correct. As a correct version of this already exists in
InstructionSimplify (bd8056ef32/lib/Analysis/InstructionSimplify.cpp (L4750-L4757)) this is just
dead code though. Drop it together with the mul(%x, 0) -> {0, false}
fold that is also already handled by InstSimplify.
Differential Revision: https://reviews.llvm.org/D60649
llvm-svn: 358339
This fixes a miscompile which was introduced in r356510 (https://reviews.llvm.org/D57372).
The problem is that the original patch removed pointer operands where the load results we're demanded, but without considering the legality of the load itself. If the masked.gather had active, but undemanded, lanes, then we could end up creating a load which loaded from an undef address. The result could be a segfault, or, in theory, an arbitrary read from a random memory location into an used register.
llvm-svn: 358299
Following D60483 and D60497, this adds support for AlwaysOverflows
handling for ssubo. This is the last case we can handle right now.
Differential Revision: https://reviews.llvm.org/D60518
llvm-svn: 358100
ssubo X, C is equivalent to saddo X, -C. Make the transformation in
InstCombine and allow the logic implemented for saddo to fold prior
usages of add nsw or sub nsw with constants.
Patch by Dan Robertson.
Differential Revision: https://reviews.llvm.org/D60061
llvm-svn: 358099
Check AlwaysOverflow condition for usubo. The implementation is the
same as the existing handling for uaddo and umulo. Handling for saddo
and ssubo will follow (smulo doesn't have the necessary ValueTracking
support).
Differential Revision: https://reviews.llvm.org/D60483
llvm-svn: 358052
This reverts commit 1383a91689.
sdiv-canonicalize.ll fails after this revision. The fold needs to be
moved outside the branch handling constant operands. However when this
is done there are further test changes, so I'm reverting this in the
meantime.
llvm-svn: 358026
Change the code to always handle the unsigned+signed cases together
with the same basic structure for add/sub/mul. The simple folds are
always handled first and then the ValueTracking overflow checks are
used.
llvm-svn: 358025
Similar to:
rL358005
Forego folding arbitrary vector constants to fix a possible miscompile bug.
We can enhance the transform if we do want to handle the more complicated
vector case.
llvm-svn: 358013
// 0 - (X sdiv C) -> (X sdiv -C) provided the negation doesn't overflow.
This fold has been around for many years and nobody noticed the potential
vector miscompile from overflow until recently...
So it seems unlikely that there's much demand for a vector sdiv optimization
on arbitrary vector constants, so just limit the matching to splat constants
to avoid the possible bug.
Differential Revision: https://reviews.llvm.org/D60426
llvm-svn: 358005
A more general canonicalization between fdiv and fmul would not
handle this case because that would have to be limited by uses
to prevent 2 values from becoming 3 values:
(x/y) * (x/y) --> (x*x) / (y*y)
(But we probably should still have that limited -- but more general --
canonicalization independently of this change.)
llvm-svn: 357943
First step towards removing the MOVMSK intrinsics completely - this patch expands MOVMSK to the pattern:
e.g. PMOVMSKB(v16i8 x):
%cmp = icmp slt <16 x i8> %x, zeroinitializer
%int = bitcast <16 x i8> %cmp to i16
%res = zext i16 %int to i32
Which is correctly handled by ISel and FastIsel (give or take an annoying movzx move....): https://godbolt.org/z/rkrSFW
Differential Revision: https://reviews.llvm.org/D60256
llvm-svn: 357909
Summary:
This fixes PR41270.
The recursive function evaluateInDifferentElementOrder expects to be called
on a vector Value, so when we call it on a vector GEP's arguments, we must
first check that the argument is indeed a vector.
Reviewers: reames, spatel
Reviewed By: spatel
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60058
llvm-svn: 357389
This reverts commit 75216a6dbcfe5fb55039ef06a07e419fa875f4a5.
I'll recommit with a better commit message with reference to the
phabricator review.
llvm-svn: 357387
This fixes PR41270.
The recursive function evaluateInDifferentElementOrder expects to be called
on a vector Value, so when we call it on a vector GEP's arguments, we must
first check that the argument is indeed a vector.
llvm-svn: 357385
If we have a commutable vector binop with inverted select-shuffles,
we don't care about the order of the operands in each vector lane:
LHS = shuffle V1, V2, <0, 5, 6, 3>
RHS = shuffle V2, V1, <0, 5, 6, 3>
LHS + RHS --> <V1[0]+V2[0], V2[1]+V1[1], V2[2]+V1[2], V1[3]+V2[3]> --> V1 + V2
PR41304:
https://bugs.llvm.org/show_bug.cgi?id=41304
...is currently titled as an SLP enhancement, but at least for the
given example, we can reduce that in instcombine because we are just
eliminating shuffles.
As noted in the TODO, this could be generalized, but I haven't thought
through those patterns completely, so this is limited to what appears
to be always safe.
Differential Revision: https://reviews.llvm.org/D60048
llvm-svn: 357382
In PR41304:
https://bugs.llvm.org/show_bug.cgi?id=41304
...we have a case where we want to fold a binop of select-shuffle (blended) values.
Rather than try to match commuted variants of the pattern, we can canonicalize the
shuffles and check for mask equality with commuted operands.
We don't produce arbitrary shuffle masks in instcombine, but select-shuffles are a
special case that the backend is required to handle because we already canonicalize
vector select to this shuffle form.
So there should be no codegen difference from this change. It's possible that this
improves CSE in IR though.
Differential Revision: https://reviews.llvm.org/D60016
llvm-svn: 357366
This may not be NFC, but I'm not sure how to expose any diffs in
tests. In theory, it should be slightly more efficient and possibly
more profitable to do the canonicalizations (which can increase the
undef elements in the mask) ahead of SimplifyDemandedVectorElts().
llvm-svn: 357272
Start using the uadd.sat and usub.sat intrinsics for the existing
canonicalizations. These intrinsics should optimize better than
expanded IR, have better handling in the X86 backend and should
be no worse than expanded IR in other backends, as far as we know.
rL357012 already introduced use of uadd.sat for the add+umin pattern.
Differential Revision: https://reviews.llvm.org/D58872
llvm-svn: 357103
This is the last step towards solving the examples shown in:
https://bugs.llvm.org/show_bug.cgi?id=14613
With this change, x86 should end up with psubus instructions
when those are available.
All known codegen issues with expanding the saturating intrinsics
were resolved with:
D59006 / rL356855
We also have some early evidence in D58872 that using the intrinsics
will lead to better perf. If some target regresses from this, custom
lowering of the intrinsics (as in the above for x86) may be needed.
llvm-svn: 357012
This helps to avoid the situation where RA spots that only 3 of the
v4f32 result of a load are used, and immediately reallocates the 4th
register for something else, requiring a stall waiting for the load.
Differential Revision: https://reviews.llvm.org/D58906
Change-Id: I947661edfd5715f62361a02b100f14aeeada29aa
llvm-svn: 356768
If they have other users we'll just end up increasing the instruction count.
We might be able to weaken this to only one of them having a single use if we can prove that the and will be removed.
Fixes PR41164.
Differential Revision: https://reviews.llvm.org/D59630
llvm-svn: 356690
If we know we're not storing a lane, we don't need to compute the lane. This could be improved by using the undef element result to further prune the mask, but I want to separate that into its own change since it's relatively likely to expose other problems.
Differential Revision: https://reviews.llvm.org/D57247
llvm-svn: 356590
Teach instcombine to propagate demanded elements through a masked load or masked gather instruction. This is in the broader context of improving vector pointer instcombine under https://reviews.llvm.org/D57140.
Differential Revision: https://reviews.llvm.org/D57372
llvm-svn: 356510
Combine 2 fcmps that are checking for nan-ness:
and (fcmp ord X, 0), (and (fcmp ord Y, 0), Z) --> and (fcmp ord X, Y), Z
or (fcmp uno X, 0), (or (fcmp uno Y, 0), Z) --> or (fcmp uno X, Y), Z
This is an exact match for a minimal reassociation pattern.
If we want to handle this more generally that should go in
the reassociate pass and allow removing this code.
This should fix:
https://bugs.llvm.org/show_bug.cgi?id=41069
llvm-svn: 356471
Follow-up to:
rL356338
rL356369
We can calculate an arbitrary vector constant minus the bitwidth, so there's
no need to limit this transform to scalars and splats.
llvm-svn: 356372
Follow-up to:
rL356338
Rotates are a special case of funnel shift where the 2 input operands
are the same value, but that does not need to be a restriction for the
canonicalization when the shift amount is a constant.
llvm-svn: 356369
This was noted as a backend problem:
https://bugs.llvm.org/show_bug.cgi?id=41057
...and subsequently fixed for x86:
rL356121
But we should canonicalize these in IR for the benefit of all targets
and improve IR analysis such as CSE.
llvm-svn: 356338
A change of two parts:
1) A generic enhancement for all callers of SDVE to exploit the fact that if all lanes are undef, the result is undef.
2) A GEP specific piece to strengthen/fix the vector index undef element handling, and call into the generic infrastructure when visiting the GEP.
The result is that we replace a vector gep with at least one undef in each lane with a undef. We can also do the same for vector intrinsics. Once the masked.load patch (D57372) has landed, I'll update to include call tests as well.
Differential Revision: https://reviews.llvm.org/D57468
llvm-svn: 356293
Before r355981, this was under LLVM_DEBUG. I don't think the assert is
quite right, but this really should be a verifier check. Instcombine
should not be asserting on this sort of thing.
llvm-svn: 356219
The shift argument is defined to be modulo the bitwidth, so if that argument
is a constant, we can always reduce the constant to its minimal form to allow
better CSE and other follow-on transforms.
We need to be careful to ignore constant expressions here, or we will likely
infinite loop. I'm adding a general vector constant query for that case.
Differential Revision: https://reviews.llvm.org/D59374
llvm-svn: 356192
This indicates an intrinsic parameter is required to be a constant,
and should not be replaced with a non-constant value.
Add the attribute to all AMDGPU and generic intrinsics that comments
indicate it should apply to. I scanned other target intrinsics, but I
don't see any obvious comments indicating which arguments are intended
to be only immediates.
This breaks one questionable testcase for the autoupgrade. I'm unclear
on whether the autoupgrade is supposed to really handle declarations
which were never valid. The verifier fails because the attributes now
refer to a parameter past the end of the argument list.
llvm-svn: 355981
I'm assuming that the nan propogation logic for InstructonSimplify's handling of fadd and fsub is correct, and applying the same to atomicrmw.
Differential Revision: https://reviews.llvm.org/D58836
llvm-svn: 355222
An idempotent atomicrmw is one that does not change memory in the process of execution. We have already added handling for the various integer operations; this patch extends the same handling to floating point operations which were recently added to IR.
Note: At the moment, we canonicalize idempotent fsub to fadd when ordering requirements prevent us from using a load. As discussed in the review, I will be replacing this with canonicalizing both floating point ops to integer ops in the near future.
Differential Revision: https://reviews.llvm.org/D58251
llvm-svn: 355210
This is part of a transform that may be done in the backend:
D13757
...but it should always be beneficial to fold this sooner in IR
for all targets.
https://rise4fun.com/Alive/vaiW
Name: sext add nsw
%add = add nsw i8 %i, C0
%ext = sext i8 %add to i32
%r = add i32 %ext, C1
=>
%s = sext i8 %i to i32
%r = add i32 %s, sext(C0)+C1
Name: zext add nuw
%add = add nuw i8 %i, C0
%ext = zext i8 %add to i16
%r = add i16 %ext, C1
=>
%s = zext i8 %i to i16
%r = add i16 %s, zext(C0)+C1
llvm-svn: 355118
Summary:
The description of KnownBits::zext() and
KnownBits::zextOrTrunc() has confusingly been telling
that the operation is equivalent to zero extending the
value we're tracking. That has not been true, instead
the user has been forced to explicitly set the extended
bits as known zero afterwards.
This patch adds a second argument to KnownBits::zext()
and KnownBits::zextOrTrunc() to control if the extended
bits should be considered as known zero or as unknown.
Reviewers: craig.topper, RKSimon
Reviewed By: RKSimon
Subscribers: javed.absar, hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58650
llvm-svn: 355099
add A, sext(B) --> sub A, zext(B)
We have to choose 1 of these forms, so I'm opting for the
zext because that's easier for value tracking.
The backend should be prepared for this change after:
D57401
rL353433
This is also a preliminary step towards reducing the amount
of bit hackery that we do in IR to optimize icmp/select.
That should be waiting to happen at a later optimization stage.
The seeming regression in the fuzzer test was discussed in:
D58359
We were only managing that fold in instcombine by luck, and
other passes should be able to deal with that better anyway.
llvm-svn: 354748
This is no-functional-change-intended, but that was also
true when it was part of rL354276, and I managed to lose
2 predicates for the fold with constant...causing much bot
distress. So this time I'm adding a couple of negative tests
to avoid that.
llvm-svn: 354384
We want to use the sum in the icmp to allow matching with
m_UAddWithOverflow and eliminate the 'not'. This is discussed
in D51929 and is another step towards solving PR14613:
https://bugs.llvm.org/show_bug.cgi?id=14613
(The matching here is incomplete. Trying to take minimal steps
to make sure we don't induce infinite looping from existing
canonicalizations of the 'select'.)
llvm-svn: 354221
Implement two more transforms of atomicrmw:
1) We can convert an atomicrmw which produces a known value in memory into an xchg instead.
2) We can convert an atomicrmw xchg w/o users into a store for some orderings.
Differential Revision: https://reviews.llvm.org/D58290
llvm-svn: 354170
For "idempotent" atomicrmw instructions which we can't simply turn into load, canonicalize the operation and constant. This reduces the matching needed elsewhere in the optimizer, but doesn't directly impact codegen.
For any architecture where OR/Zero is not a good default choice, you can extend the AtomicExpand lowerIdempotentRMWIntoFencedLoad mechanism. I reviewed X86 to make sure this works well, haven't audited other backends.
Differential Revision: https://reviews.llvm.org/D58244
llvm-svn: 354058
Expand on Quentin's r353471 patch which converts some atomicrmws into loads. Handle remaining operation types, and fix a slight bug. Atomic loads are required to have alignment. Since this was within the InstCombine fixed point, somewhere else in InstCombine was adding alignment before the verifier saw it, but still, we should fix.
Terminology wise, I'm using the "idempotent" naming that is used for the same operations in AtomicExpand and X86ISelLoweringInfo. Once this lands, I'll add similar tests for AtomicExpand, and move the pattern match function to a common location. In the review, there was seemingly consensus that "idempotent" was slightly incorrect for this context. Once we setle on a better name, I'll update all uses at once.
Differential Revision: https://reviews.llvm.org/D58242
llvm-svn: 354046
When instcombine sinks an instruction between two basic blocks, it sinks any
dbg.value users in the source block with it, to prevent debug use-before-free.
However we can do better by attempting to salvage the debug users, which would
avoid moving where the variable location changes. If we successfully salvage,
still sink a (cloned) dbg.value with the sunk instruction, as the sunk
instruction is more likely to be "live" later in the compilation process.
If we can't salvage dbg.value users of a sunk instruction, mark the dbg.values
in the original block as being undef. This terminates any earlier variable
location range, and represents the fact that we've optimized out the variable
location for a portion of the program.
Differential Revision: https://reviews.llvm.org/D56788
llvm-svn: 353936
This bug seems to be harmless in release builds, but will cause an error in UBSAN
builds or an assertion failure in debug builds.
When it gets to this opcode comparison, it assumes both of the operands are BinaryOperators,
but the prior m_LogicalShift will also match a ConstantExpr. The cast<BinaryOperator> will
assert in a debug build, or reading an invalid value for BinaryOp from memory with
((BinaryOperator*)constantExpr)->getOpcode() will cause an error in a UBSAN build.
The test I added will fail without this change in debug/UBSAN builds, but not in release.
Patch by: @AndrewScheidecker (Andrew Scheidecker)
Differential Revision: https://reviews.llvm.org/D58049
llvm-svn: 353736
For some specific cases with bitcast A->B->A with intervening PHI nodes InstCombiner::optimizeBitCastFromPhi transformation creates extra PHI nodes, which are actually a copy of already created PHI or in another words, they are redundant. These extra PHI nodes could lead to extra move instructions generated after DeSSA transformation. This happens when several conditions are met
- SROA kicks in and creates new alloca;
- there is a simple assignment L = R, which falls under 'canonicalize loads' done by combineLoadToOperationType (this transformation is by default). Exactly this transformation is the reason of bitcasts generated;
- the alloca is then used in A->B->A + PHI chain;
- there is a loop unrolling.
As a result optimizeBitCastFromPhi creates as many of PHI nodes for each new SROA alloca as loop unrolling factor is. These new extra PHI nodes are redundant actually except of one and should not be created. Moreover the idea of optimizeBitCastFromPhi is to get rid of the cast (when possible) but that doesn't happen in these conditions.
The proposed fix is to do the cast replacement for the whole calculated/accumulated PHI closure not for one cast only, which is an argument to the optimizeBitCastFromPhi. These will help to accomplish several things: 1) avoid extra PHI nodes generated as all casts which may trigger optimizeBitCastFromPhi transformation will be replaced, 3) bitcasts will be replaced, and 3) create more opportunities to remove dead code, which appears after the replacement.
A new test case shows that it's possible to get rid of all bitcasts completely and get quite good code reduction.
Author: Igor Tsimbalist <igor.v.tsimbalist@intel.com>
Reviewed By: Carrot
Differential Revision: https://reviews.llvm.org/D57053
llvm-svn: 353595
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
llvm-svn: 353563
This commit teaches InstCombine how to replace an atomicrmw operation
into a simple load atomic.
For a given `atomicrmw <op>`, this is possible when:
1. The ordering of that operation is compatible with a load (i.e.,
anything that doesn't have a release semantic).
2. <op> does not modify the value being stored
Differential Revision: https://reviews.llvm.org/D57854
llvm-svn: 353471
This fixes a class of bugs introduced by D44367,
which transforms various cases of icmp (bitcast ([su]itofp X)), Y to icmp X, Y.
If the bitcast is between vector types with a different number of elements,
the current code will produce bad IR along the lines of: icmp <N x i32> ..., <M x i32> <...>.
This patch suppresses the transform if the bitcast changes the number of vector elements.
Patch by: @AndrewScheidecker (Andrew Scheidecker)
Differential Revision: https://reviews.llvm.org/D57871
llvm-svn: 353467
We should canonicalize to one of these forms,
and compare-with-zero could be more conducive
to follow-on transforms. This also leads to
generally better codegen as shown in PR40611:
https://bugs.llvm.org/show_bug.cgi?id=40611
llvm-svn: 353313
As discussed in D53037, this can lead to worse codegen, and we
don't generally expect the backend to be able to optimize
arbitrary shuffles. If there's only one use of the 1st shuffle,
that means it's getting removed, so that should always be
safe.
llvm-svn: 353235
Summary:
The fix added in r352904 is not quite correct, or rather misleading:
1. When the texfailctrl (TFC) argument was non-constant, the fix assumed
non-TFE/LWE, which is incorrect.
2. Regardless, this code path cannot even be hit for correct
TFE/LWE-enabled calls, because those return a struct. Added
a test case for those for completeness.
Change-Id: I92d314dbc67a2670f6d7adaab765ef45f56a49cf
Reviewers: hliao, dstuttard, arsenm
Subscribers: kzhuravl, jvesely, wdng, yaxunl, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57681
llvm-svn: 353097
This cleans up all GetElementPtr creation in LLVM to explicitly pass a
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57173
llvm-svn: 352913
This cleans up all LoadInst creation in LLVM to explicitly pass the
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57172
llvm-svn: 352911
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
An unused variable problem was introduced with rL352870
and stubbed out with rL352871, but we can make a better
fix by actually using the local variable in code rather
than just the assert.
llvm-svn: 352873
If we can reduce the x86-specific intrinsic to the generic op, it allows existing
simplifications and value tracking folds. AFAICT, this always results in identical
x86 codegen in the non-reduced case...which should be true because we semi-generically
(too aggressively IMO) convert to llvm.uadd.with.overflow in CGP, so the DAG/isel must
already combine/lower this intrinsic as expected.
This isn't quite what was requested in:
https://bugs.llvm.org/show_bug.cgi?id=40486
...but we want to have these kinds of folds early for efficiency and to enable greater
simplifications. For the case in the bug report where we have:
_addcarry_u64(0, ahi, 0, &ahi)
...this gets completely simplified away in IR.
Differential Revision: https://reviews.llvm.org/D57453
llvm-svn: 352870
Simon Pilgrim